def ev_close(self, worker, timedout): # Worker is closing -- it's time to gather results... self._runtimer_finalize(worker) # Display command output, try to order buffers by rc nodesetify = lambda v: (v[0], NodeSet._fromlist1(v[1])) cleaned = False for _rc, nodelist in sorted(worker.iter_retcodes()): ns_remain = NodeSet._fromlist1(nodelist) # Then order by node/nodeset (see nodeset_cmpkey) for buf, nodeset in sorted(map(nodesetify, worker.iter_buffers(nodelist)), key=bufnodeset_cmpkey): if not cleaned: # clean runtimer line before printing first result self._runtimer_clean() cleaned = True self._display.print_gather(nodeset, buf) ns_remain.difference_update(nodeset) if ns_remain: self._display.print_gather_finalize(ns_remain) self._display.flush() self._close_common(worker) # Notify main thread to update its prompt self.update_prompt(worker)
def ev_close(self, worker, timedout): # Worker is closing -- it's time to gather results... self._runtimer_finalize(worker) # Display command output, try to order buffers by rc nodesetify = lambda v: (v[0], NodeSet._fromlist1(v[1])) cleaned = False for _rc, nodelist in sorted(worker.iter_retcodes()): ns_remain = NodeSet._fromlist1(nodelist) # Then order by node/nodeset (see nodeset_cmpkey) for buf, nodeset in sorted(map(nodesetify, worker.iter_buffers(nodelist)), key=bufnodeset_cmpkey): if not cleaned: # clean runtimer line before printing first result self._runtimer_clean() cleaned = True self._display.print_gather(nodeset, buf) ns_remain.difference_update(nodeset) if ns_remain: self._display.print_gather_finalize(ns_remain) self._display.flush() self._close_common(worker) # Notify main thread to update its prompt self.update_prompt(worker)
def _close_common(self, worker): verbexit = VERB_QUIET if self._display.maxrc: verbexit = VERB_STD # Display return code if not ok ( != 0) for rc, nodelist in worker.iter_retcodes(): if rc != 0: nsdisp = ns = NodeSet._fromlist1(nodelist) if self._display.verbosity > VERB_QUIET and len(ns) > 1: nsdisp = "%s (%d)" % (ns, len(ns)) msgrc = "clush: %s: exited with exit code %d" % (nsdisp, rc) self._display.vprint_err(verbexit, msgrc) # Display nodes that didn't answer within command timeout delay if worker.num_timeout() > 0: self._display.vprint_err(verbexit, "clush: %s: command timeout" % \ NodeSet._fromlist1(worker.iter_keys_timeout()))
def _close_common(self, worker): verbexit = VERB_QUIET if self._display.maxrc: verbexit = VERB_STD # Display return code if not ok ( != 0) for rc, nodelist in worker.iter_retcodes(): if rc != 0: nsdisp = ns = NodeSet._fromlist1(nodelist) if self._display.verbosity > VERB_QUIET and len(ns) > 1: nsdisp = "%s (%d)" % (ns, len(ns)) msgrc = "clush: %s: exited with exit code %d" % (nsdisp, rc) self._display.vprint_err(verbexit, msgrc) # Display nodes that didn't answer within command timeout delay if worker.num_timeout() > 0: self._display.vprint_err(verbexit, "clush: %s: command timeout" % \ NodeSet._fromlist1(worker.iter_keys_timeout()))
def ev_timeout(self, worker): """ Called to indicate that a worker has timed out (worker timeout only). """ # WARNING!!! this is not possible as metaworking is changing task's # shared timeout set! #for node in worker.iter_keys_timeout(): # self.metaworker._on_node_timeout(node) # we use NodeSet to copy set for node in NodeSet._fromlist1(worker.iter_keys_timeout()): self.metaworker._on_node_timeout(node)
def ev_timeout(self, worker): """ Called to indicate that a worker has timed out (worker timeout only). """ # WARNING!!! this is not possible as metaworking is changing task's # shared timeout set! #for node in worker.iter_keys_timeout(): # self.metaworker._on_node_timeout(node) # we use NodeSet to copy set for node in NodeSet._fromlist1(worker.iter_keys_timeout()): self.metaworker._on_node_timeout(node)
def ev_close(self, worker, timedout): """End of CTL responder""" self.logger.debug("TreeWorkerResponder: ev_close timedout=%s", timedout) if timedout: # some nodes did timeout msg = TimeoutMessage(NodeSet._fromlist1(worker.iter_keys_timeout()), self.srcwkr) self.gwchan.send(msg) if self.timer is not None: # finalize grooming self.ev_timer(None) self.timer.invalidate()
def ev_close(self, worker, timedout): """End of CTL responder""" self.logger.debug("TreeWorkerResponder: ev_close timedout=%s", timedout) if timedout: # some nodes did timeout msg = TimeoutMessage(NodeSet._fromlist1(worker.iter_keys_timeout()), self.srcwkr) self.gwchan.send(msg) if self.timer is not None: # finalize grooming self.ev_timer(None) self.timer.invalidate()
def ev_close(self, worker, timedout): """ Called to indicate that a worker has just finished. It may have failed on timeout if timedout is set. """ self.logger.debug("MetaWorkerEventHandler: ev_close, timedout=%s", timedout) if timedout: # WARNING!!! this is not possible as metaworker is changing task's # shared timeout set! #for node in worker.iter_keys_timeout(): # self.metaworker._on_node_timeout(node) # we use NodeSet to copy set for node in NodeSet._fromlist1(worker.iter_keys_timeout()): self.metaworker._on_node_timeout(node) self.metaworker._check_fini()
def ttyloop(task, nodeset, timeout, display, remote): """Manage the interactive prompt to run command""" readline_avail = False interactive = task.default("USER_interactive") if interactive: try: import readline readline_setup() readline_avail = True except ImportError: pass display.vprint(VERB_STD, \ "Enter 'quit' to leave this interactive mode") rc = 0 ns = NodeSet(nodeset) ns_info = True cmd = "" while task.default("USER_running") or \ (interactive and cmd.lower() != 'quit'): try: # Set SIGUSR1 handler if needed if task.default("USER_handle_SIGUSR1"): signal.signal(signal.SIGUSR1, signal_handler) if task.default("USER_interactive") and \ not task.default("USER_running"): if ns_info: display.vprint(VERB_QUIET, \ "Working with nodes: %s" % ns) ns_info = False prompt = "clush> " else: prompt = "" try: cmd = raw_input(prompt) assert cmd is not None, "Result of raw_input() is None!" finally: signal.signal(signal.SIGUSR1, signal.SIG_IGN) except EOFError: print() return except UpdatePromptException: if task.default("USER_interactive"): continue return except KeyboardInterrupt as kbe: # Caught SIGINT here (main thread) but the signal will also reach # subprocesses (that will most likely kill them) if display.gather: # Suspend task, so we can safely access its data from here task.suspend() # If USER_running is not set, the task had time to finish, # that could mean all subprocesses have been killed and all # handlers have been processed. if not task.default("USER_running"): # let's clush_excepthook handle the rest raise kbe # If USER_running is set, the task didn't have time to finish # its work, so we must print something for the user... print_warn = False # Display command output, but cannot order buffers by rc nodesetify = lambda v: (v[0], NodeSet._fromlist1(v[1])) for buf, nodeset in sorted(map(nodesetify, task.iter_buffers()), key=bufnodeset_cmpkey): if not print_warn: print_warn = True display.vprint_err(VERB_STD, \ "Warning: Caught keyboard interrupt!") display.print_gather(nodeset, buf) # Return code handling verbexit = VERB_QUIET if display.maxrc: verbexit = VERB_STD ns_ok = NodeSet() for rc, nodelist in task.iter_retcodes(): ns_ok.add(NodeSet._fromlist1(nodelist)) if rc != 0: # Display return code if not ok ( != 0) nsdisp = ns = NodeSet._fromlist1(nodelist) if display.verbosity >= VERB_QUIET and len(ns) > 1: nsdisp = "%s (%d)" % (ns, len(ns)) msgrc = "clush: %s: exited with exit code %d" % ( nsdisp, rc) display.vprint_err(verbexit, msgrc) # Add uncompleted nodeset to exception object kbe.uncompleted_nodes = ns - ns_ok # Display nodes that didn't answer within command timeout delay if task.num_timeout() > 0: display.vprint_err(verbexit, \ "clush: %s: command timeout" % \ NodeSet._fromlist1(task.iter_keys_timeout())) raise kbe if task.default("USER_running"): ns_reg, ns_unreg = NodeSet(), NodeSet() for client in task._engine.clients(): if client.registered: ns_reg.add(client.key) else: ns_unreg.add(client.key) if ns_unreg: pending = "\nclush: pending(%d): %s" % (len(ns_unreg), ns_unreg) else: pending = "" display.vprint_err(VERB_QUIET, "clush: interrupt (^C to abort task)") gws = list(task.gateways) if not gws: display.vprint_err( VERB_QUIET, "clush: in progress(%d): %s%s" % (len(ns_reg), ns_reg, pending)) else: display.vprint_err( VERB_QUIET, "clush: in progress(%d): %s%s\n" "clush: [tree] open gateways(%d): %s" % (len(ns_reg), ns_reg, pending, len(gws), NodeSet._fromlist1(gws))) for gw, (chan, metaworkers) in task.gateways.items(): act_targets = NodeSet.fromlist(mw.gwtargets[gw] for mw in metaworkers) if act_targets: display.vprint_err( VERB_QUIET, "clush: [tree] in progress(%d) on %s: %s" % (len(act_targets), gw, act_targets)) else: cmdl = cmd.lower() try: ns_info = True if cmdl.startswith('+'): ns.update(cmdl[1:]) elif cmdl.startswith('-'): ns.difference_update(cmdl[1:]) elif cmdl.startswith('@'): ns = NodeSet(cmdl[1:]) elif cmdl == '=': display.gather = not display.gather if display.gather: display.vprint(VERB_STD, \ "Switching to gathered output format") else: display.vprint(VERB_STD, \ "Switching to standard output format") task.set_default("stdout_msgtree", \ display.gather or display.line_mode) ns_info = False continue elif not cmdl.startswith('?'): # if ?, just print ns_info ns_info = False except NodeSetParseError: display.vprint_err(VERB_QUIET, \ "clush: nodeset parse error (ignoring)") if ns_info: continue if cmdl.startswith('!') and len(cmd.strip()) > 0: run_command(task, cmd[1:], None, timeout, display, remote) elif cmdl != "quit": if not cmd: continue if readline_avail: readline.write_history_file(get_history_file()) run_command(task, cmd, ns, timeout, display, remote) return rc
def ev_close(self, worker, timedout): if timedout: nodeset = NodeSet._fromlist1(worker.iter_keys_timeout()) self._display.vprint_err(VERB_QUIET, "clush: %s: command timeout" % nodeset) self.update_prompt(worker)
def ttyloop(task, nodeset, timeout, display, remote): """Manage the interactive prompt to run command""" readline_avail = False interactive = task.default("USER_interactive") if interactive: try: import readline readline_setup() readline_avail = True except ImportError: pass display.vprint(VERB_STD, \ "Enter 'quit' to leave this interactive mode") rc = 0 ns = NodeSet(nodeset) ns_info = True cmd = "" while task.default("USER_running") or \ (interactive and cmd.lower() != 'quit'): try: # Set SIGUSR1 handler if needed if task.default("USER_handle_SIGUSR1"): signal.signal(signal.SIGUSR1, signal_handler) if task.default("USER_interactive") and \ not task.default("USER_running"): if ns_info: display.vprint(VERB_QUIET, \ "Working with nodes: %s" % ns) ns_info = False prompt = "clush> " else: prompt = "" try: cmd = raw_input(prompt) assert cmd is not None, "Result of raw_input() is None!" finally: signal.signal(signal.SIGUSR1, signal.SIG_IGN) except EOFError: print() return except UpdatePromptException: if task.default("USER_interactive"): continue return except KeyboardInterrupt as kbe: # Caught SIGINT here (main thread) but the signal will also reach # subprocesses (that will most likely kill them) if display.gather: # Suspend task, so we can safely access its data from here task.suspend() # If USER_running is not set, the task had time to finish, # that could mean all subprocesses have been killed and all # handlers have been processed. if not task.default("USER_running"): # let's clush_excepthook handle the rest raise kbe # If USER_running is set, the task didn't have time to finish # its work, so we must print something for the user... print_warn = False # Display command output, but cannot order buffers by rc nodesetify = lambda v: (v[0], NodeSet._fromlist1(v[1])) for buf, nodeset in sorted(map(nodesetify, task.iter_buffers()), key=bufnodeset_cmpkey): if not print_warn: print_warn = True display.vprint_err(VERB_STD, \ "Warning: Caught keyboard interrupt!") display.print_gather(nodeset, buf) # Return code handling verbexit = VERB_QUIET if display.maxrc: verbexit = VERB_STD ns_ok = NodeSet() for rc, nodelist in task.iter_retcodes(): ns_ok.add(NodeSet._fromlist1(nodelist)) if rc != 0: # Display return code if not ok ( != 0) nsdisp = ns = NodeSet._fromlist1(nodelist) if display.verbosity >= VERB_QUIET and len(ns) > 1: nsdisp = "%s (%d)" % (ns, len(ns)) msgrc = "clush: %s: exited with exit code %d" % (nsdisp, rc) display.vprint_err(verbexit, msgrc) # Add uncompleted nodeset to exception object kbe.uncompleted_nodes = ns - ns_ok # Display nodes that didn't answer within command timeout delay if task.num_timeout() > 0: display.vprint_err(verbexit, \ "clush: %s: command timeout" % \ NodeSet._fromlist1(task.iter_keys_timeout())) raise kbe if task.default("USER_running"): ns_reg, ns_unreg = NodeSet(), NodeSet() for client in task._engine.clients(): if client.registered: ns_reg.add(client.key) else: ns_unreg.add(client.key) if ns_unreg: pending = "\nclush: pending(%d): %s" % (len(ns_unreg), ns_unreg) else: pending = "" display.vprint_err(VERB_QUIET, "clush: interrupt (^C to abort task)") gws = list(task.gateways) if not gws: display.vprint_err(VERB_QUIET, "clush: in progress(%d): %s%s" % (len(ns_reg), ns_reg, pending)) else: display.vprint_err(VERB_QUIET, "clush: in progress(%d): %s%s\n" "clush: [tree] open gateways(%d): %s" % (len(ns_reg), ns_reg, pending, len(gws), NodeSet._fromlist1(gws))) for gw, (chan, metaworkers) in task.gateways.items(): act_targets = NodeSet.fromlist(mw.gwtargets[gw] for mw in metaworkers) if act_targets: display.vprint_err(VERB_QUIET, "clush: [tree] in progress(%d) on %s: %s" % (len(act_targets), gw, act_targets)) else: cmdl = cmd.lower() try: ns_info = True if cmdl.startswith('+'): ns.update(cmdl[1:]) elif cmdl.startswith('-'): ns.difference_update(cmdl[1:]) elif cmdl.startswith('@'): ns = NodeSet(cmdl[1:]) elif cmdl == '=': display.gather = not display.gather if display.gather: display.vprint(VERB_STD, \ "Switching to gathered output format") else: display.vprint(VERB_STD, \ "Switching to standard output format") task.set_default("stdout_msgtree", \ display.gather or display.line_mode) ns_info = False continue elif not cmdl.startswith('?'): # if ?, just print ns_info ns_info = False except NodeSetParseError: display.vprint_err(VERB_QUIET, \ "clush: nodeset parse error (ignoring)") if ns_info: continue if cmdl.startswith('!') and len(cmd.strip()) > 0: run_command(task, cmd[1:], None, timeout, display, remote) elif cmdl != "quit": if not cmd: continue if readline_avail: readline.write_history_file(get_history_file()) run_command(task, cmd, ns, timeout, display, remote) return rc
def ev_close(self, worker, timedout): if timedout: nodeset = NodeSet._fromlist1(worker.iter_keys_timeout()) self._display.vprint_err(VERB_QUIET, "clush: %s: command timeout" % nodeset) self.update_prompt(worker)
def ev_timeout(self, worker): """Received timeout event: some nodes did timeout""" msg = TimeoutMessage(NodeSet._fromlist1(worker.iter_keys_timeout()), self.srcwkr) self.gwchan.send(msg)