class WrapMesh():
"""Wrapper for module Mesh"""
def __init__(self, dir):
"""Constructor."""
self.directory = dir
# setup user interface
self.widget = QtGui.QWidget()
self.ui = Ui_Mesh()
self.ui.setupUi(self.widget)
# module Mesh
self.callbackOpenProfilesFile = functools.partial(uih.getOpenFileName, "Open Profiles File", "Line Sets (*.i3s)", self.ui.lineEditProfiles, self.directory, self.widget)
QtCore.QObject.connect(self.ui.pushButtonProfiles, QtCore.SIGNAL(_fromUtf8("clicked()")), self.callbackOpenProfilesFile)
self.callbackOpenReachFile = functools.partial(uih.getOpenFileName, "Open Reach File", "Line Sets (*.i2s *.i3s)", self.ui.lineEditReach, self.directory, self.widget)
QtCore.QObject.connect(self.ui.pushButtonReach, QtCore.SIGNAL(_fromUtf8("clicked()")), self.callbackOpenReachFile)
self.callbackOpenLBLFile = functools.partial(uih.getOpenFileName, "Open Left Breakline File", "Line Sets (*.i2s *.i3s)", self.ui.lineEditLBL, self.directory, self.widget)
QtCore.QObject.connect(self.ui.pushButtonLBL, QtCore.SIGNAL(_fromUtf8("clicked()")), self.callbackOpenLBLFile)
self.callbackOpenRBLFile = functools.partial(uih.getOpenFileName, "Open Right Breakline File", "Line Sets (*.i2s *.i3s)", self.ui.lineEditRBL, self.directory, self.widget)
QtCore.QObject.connect(self.ui.pushButtonRBL, QtCore.SIGNAL(_fromUtf8("clicked()")), self.callbackOpenRBLFile)
self.callbackOpenLBOFile = functools.partial(uih.getOpenFileName, "Open Left Boundary File", "Line Sets (*.i2s *.i3s)", self.ui.lineEditLBO, self.directory, self.widget)
QtCore.QObject.connect(self.ui.pushButtonLBO, QtCore.SIGNAL(_fromUtf8("clicked()")), self.callbackOpenLBOFile)
self.callbackOpenRBOFile = functools.partial(uih.getOpenFileName, "Open Right Boundary File", "Line Sets (*.i2s *.i3s)", self.ui.lineEditRBO, self.directory, self.widget)
QtCore.QObject.connect(self.ui.pushButtonRBO, QtCore.SIGNAL(_fromUtf8("clicked()")), self.callbackOpenRBOFile)
self.callbackSaveMeshFile = functools.partial(uih.getSaveFileName, "Save Mesh As", "2D T3 Mesh (*.t3s)", self.ui.lineEditMesh, self.directory, self.widget)
QtCore.QObject.connect(self.ui.pushButtonMesh, QtCore.SIGNAL(_fromUtf8("clicked()")), self.callbackSaveMeshFile)
self.callbackSaveIPFile = functools.partial(uih.getSaveFileName, "Save Interpolated Profiles As", "Line Sets (*.i3s)", self.ui.lineEditIP, self.directory, self.widget)
QtCore.QObject.connect(self.ui.pushButtonIP, QtCore.SIGNAL(_fromUtf8("clicked()")), self.callbackSaveIPFile)
self.callbackSaveLEFile = functools.partial(uih.getSaveFileName, "Save Left Edge As", "Line Sets (*.i3s)", self.ui.lineEditLE, self.directory, self.widget)
QtCore.QObject.connect(self.ui.pushButtonLE, QtCore.SIGNAL(_fromUtf8("clicked()")), self.callbackSaveLEFile)
self.callbackSaveREFile = functools.partial(uih.getSaveFileName, "Save Right Edge As", "Line Sets (*.i3s)", self.ui.lineEditRE, self.directory, self.widget)
QtCore.QObject.connect(self.ui.pushButtonRE, QtCore.SIGNAL(_fromUtf8("clicked()")), self.callbackSaveREFile)
self.callbackSaveOLFile = functools.partial(uih.getSaveFileName, "Save Outline As", "Line Sets (*.i3s)", self.ui.lineEditOL, self.directory, self.widget)
QtCore.QObject.connect(self.ui.pushButtonOL, QtCore.SIGNAL(_fromUtf8("clicked()")), self.callbackSaveOLFile)
self.callbackSaveWSFile = functools.partial(uih.getSaveFileName, "Save Workspace As", "EnSim WorkSpace File (*.ews)", self.ui.lineEditWS, self.directory, self.widget)
QtCore.QObject.connect(self.ui.pushButtonWS, QtCore.SIGNAL(_fromUtf8("clicked()")), self.callbackSaveWSFile)
self.callbackLBL = functools.partial(self.setEnabledBL, self.ui.checkBoxLBL, self.ui.pushButtonLBL, self.ui.lineEditLBL, self.ui.spinBoxNNL)
QtCore.QObject.connect(self.ui.checkBoxLBL, QtCore.SIGNAL("clicked()"), self.callbackLBL)
self.callbackRBL = functools.partial(self.setEnabledBL, self.ui.checkBoxRBL, self.ui.pushButtonRBL, self.ui.lineEditRBL, self.ui.spinBoxNNR)
QtCore.QObject.connect(self.ui.checkBoxRBL, QtCore.SIGNAL("clicked()"), self.callbackRBL)
self.callbackLBO = functools.partial(uih.setEnabled, self.ui.checkBoxLBO, self.ui.pushButtonLBO, self.ui.lineEditLBO)
QtCore.QObject.connect(self.ui.checkBoxLBO, QtCore.SIGNAL("clicked()"), self.callbackLBO)
self.callbackRBO = functools.partial(uih.setEnabled, self.ui.checkBoxRBO, self.ui.pushButtonRBO, self.ui.lineEditRBO)
QtCore.QObject.connect(self.ui.checkBoxRBO, QtCore.SIGNAL("clicked()"), self.callbackRBO)
self.callbackMesh = functools.partial(uih.setEnabled, self.ui.checkBoxMesh, self.ui.pushButtonMesh, self.ui.lineEditMesh)
QtCore.QObject.connect(self.ui.checkBoxMesh, QtCore.SIGNAL("clicked()"), self.callbackMesh)
self.callbackIP = functools.partial(uih.setEnabled, self.ui.checkBoxIP, self.ui.pushButtonIP, self.ui.lineEditIP)
QtCore.QObject.connect(self.ui.checkBoxIP, QtCore.SIGNAL("clicked()"), self.callbackIP)
self.callbackLE = functools.partial(uih.setEnabled, self.ui.checkBoxLE, self.ui.pushButtonLE, self.ui.lineEditLE)
QtCore.QObject.connect(self.ui.checkBoxLE, QtCore.SIGNAL("clicked()"), self.callbackLE)
self.callbackRE = functools.partial(uih.setEnabled, self.ui.checkBoxRE, self.ui.pushButtonRE, self.ui.lineEditRE)
QtCore.QObject.connect(self.ui.checkBoxRE, QtCore.SIGNAL("clicked()"), self.callbackRE)
self.callbackOL = functools.partial(uih.setEnabled, self.ui.checkBoxOL, self.ui.pushButtonOL, self.ui.lineEditOL)
QtCore.QObject.connect(self.ui.checkBoxOL, QtCore.SIGNAL("clicked()"), self.callbackOL)
self.callbackWS = functools.partial(uih.setEnabled, self.ui.checkBoxWS, self.ui.pushButtonWS, self.ui.lineEditWS)
QtCore.QObject.connect(self.ui.checkBoxWS, QtCore.SIGNAL("clicked()"), self.callbackWS)
QtCore.QObject.connect(self.ui.pushButtonCreate, QtCore.SIGNAL("clicked()"), self.create)
def setDir(self, directory):
self.directory = directory
def initialize(self):
import os
abs_path = os.path.abspath('.')
dir = os.path.join(abs_path, 'examples/').replace('\\', '/')
### ~ module Mesh ~ ###
self.ui.lineEditProfiles.setText(dir + "example_03/PROFILES.i3s")
self.ui.lineEditReach.setText(dir + "example_03/AXIS.i2s")
uih.setEnabledInitialize(self.ui.checkBoxLBO, self.ui.pushButtonLBO, self.ui.lineEditLBO)
self.ui.lineEditLBO.setText(dir + "example_03/LEFT_BOUNDARY.i3s")
uih.setEnabledInitialize(self.ui.checkBoxRBO, self.ui.pushButtonRBO, self.ui.lineEditRBO)
self.ui.lineEditRBO.setText(dir + "example_03/RIGHT_BOUNDARY.i3s")
self.ui.checkBoxEC.setChecked(True)
self.ui.doubleSpinBoxEL.setValue(1.0)
self.ui.spinBoxNNC.setValue(20)
self.ui.lineEditMesh.setText(dir + "example_03/output/MESH.t3s")
uih.setEnabledInitialize(self.ui.checkBoxMesh, self.ui.pushButtonMesh, self.ui.lineEditMesh)
self.ui.lineEditWS.setText(dir + "example_03/output/VIEW.ews")
uih.setEnabledInitialize(self.ui.checkBoxWS, self.ui.pushButtonWS, self.ui.lineEditWS)
def create(self):
info = "Input data:\n"
try:
nodRaw, proRaw = fh.readI3S(self.ui.lineEditProfiles.text())
info += " - Profiles:\t\t\t{0}\n".format(len(proRaw))
except:
QMessageBox.critical(self.widget, "Error", "Not able to load profiles file!\nCheck filename or content!")
return
try:
nodReach = fh.readI2S(self.ui.lineEditReach.text())[0]
info += " - Reach nodes:\t\t{0}\n".format(len(nodReach))
except:
QMessageBox.critical(self.widget, "Error", "Not able to load reach file!\nCheck filename or content!")
return
if len(proRaw) != len(nodReach):
QMessageBox.critical(self.widget, "Error", "Number of profiles must correspond to number of reach nodes!")
return
nnC = self.ui.spinBoxNNC.value()
length = self.ui.doubleSpinBoxEL.value()
nnL = None
nodLBL = None
if self.ui.checkBoxLBL.isChecked():
nnL = self.ui.spinBoxNNL.value()
try:
if self.ui.lineEditLBL.text().split(".")[-1] == "i2s":
nodLBL = fh.readI2S(self.ui.lineEditLBL.text())[0]
else:
nodLBL = fh.readI3S(self.ui.lineEditLBL.text())[0]
info += " - Left breakline nodes:\t{0}\n".format(len(nodLBL))
except:
QMessageBox.critical(self.widget, "Error", "Not able to load left breakline file!\nCheck filename or content!")
return
else:
nnL = None
nodLBL = None
nnR = None
nodRBL = None
if self.ui.checkBoxRBL.isChecked():
nnR = self.ui.spinBoxNNR.value()
try:
if self.ui.lineEditRBL.text().split(".")[-1] == "i2s":
nodRBL = fh.readI2S(self.ui.lineEditRBL.text())[0]
else:
nodRBL = fh.readI3S(self.ui.lineEditRBL.text())[0]
info += " - Right breakline nodes:\t{0}\n".format(len(nodRBL))
except:
QMessageBox.critical(self.widget, "Error", "Not able to load right breakline file!\nCheck filename or content!")
return
else:
nnR = None
nodRBL = None
nodLBO = None
if self.ui.checkBoxLBO.isChecked():
try:
if self.ui.lineEditLBO.text().split(".")[-1] == "i2s":
nodLBO = fh.readI2S(self.ui.lineEditLBO.text())[0]
else:
nodLBO = fh.readI3S(self.ui.lineEditLBO.text())[0]
info += " - Left boundary nodes:\t{0}\n".format(len(nodLBO))
except:
QMessageBox.critical(self.widget, "Error", "Not able to load left boundary file!\nCheck filename or content!")
return
else:
nodLBO = None
nodRBO = None
if self.ui.checkBoxRBO.isChecked():
try:
if self.ui.lineEditRBO.text().split(".")[-1] == "i2s":
nodRBO = fh.readI2S(self.ui.lineEditRBO.text())[0]
else:
nodRBO = fh.readI3S(self.ui.lineEditRBO.text())[0]
info += " - Right boundary nodes:\t{0}\n".format(len(nodRBO))
except:
QMessageBox.critical(self.widget, "Error", "Not able to load right boundary file!\nCheck filename or content!")
return
else:
nodRBO = None
self.mesh = CalcMesh( nodRaw,
proRaw,
nodReach,
nnC,
length,
nodLBL,
nodRBL,
nodLBO,
nodRBO,
nnL,
nnR
)
try:
info += self.mesh.determineFlowDirection()
except:
QMessageBox.critical(self.widget, "Error", "Not able to determine flow direction!\nCheck inputs!")
return
try:
info += self.mesh.normalizeProfiles()
except:
QMessageBox.critical(self.widget, "Error", "Not able to normalize profiles!\nCheck inputs!")
return
try:
info += self.mesh.interpolateChannel()
except:
QMessageBox.critical(self.widget, "Error", "Not able to interpolate channel!\nCheck inputs!")
return
try:
info += self.mesh.interpolateElevation()
except:
QMessageBox.critical(self.widget, "Error", "Not able to interpolate elevation!\nCheck inputs!")
return
if self.ui.checkBoxEC.isChecked():
try:
info += self.mesh.interpolateElevationCorrection()
except:
QMessageBox.critical(self.widget, "Error", "Not able to interpolate elevation correction!\nCheck inputs!")
return
try:
info += self.mesh.createMesh()
except:
QMessageBox.critical(self.widget, "Error", "Not able to create mesh!\nCheck inputs!")
return
try:
self.writeOutput()
except:
QMessageBox.critical(self.widget, "Error", "Not able to write output!")
return
QMessageBox.information(self.widget, "Module Mesh", info)
def writeOutput(self):
if self.ui.checkBoxMesh.isChecked():
fh.writeT3S(self.mesh.nodMesh, self.mesh.mesh, self.ui.lineEditMesh.text())
if self.ui.checkBoxIP.isChecked():
fh.writeI3S(self.mesh.nodInterp, self.mesh.proInterp, self.ui.lineEditIP.text())
if self.ui.checkBoxLE.isChecked():
LE = {1:mc.getNodeIDsLeft(self.mesh.proMesh)}
fh.writeI3S(self.mesh.nodMesh, LE, self.ui.lineEditLE.text())
if self.ui.checkBoxRE.isChecked():
RE = {1:mc.getNodeIDsRight(self.mesh.proMesh)}
fh.writeI3S(self.mesh.nodMesh, RE, self.ui.lineEditRE.text())
if self.ui.checkBoxOL.isChecked():
OL = {1:mc.getNodeIDsOutline(self.mesh.proMesh)}
fh.writeI3S(self.mesh.nodMesh, OL, self.ui.lineEditOL.text())
if self.ui.checkBoxWS.isChecked():
view = """"""
counter = -1
content = """"""
content += ws.lineSet.format(self.getDim(self.ui.lineEditProfiles), self.getPath(self.ui.lineEditProfiles), "0xff0000", "raw profiles")
counter += 1
view += ":ObjectView {0} 0\n".format(counter)
content += ws.lineSet.format(self.getDim(self.ui.lineEditReach), self.getPath(self.ui.lineEditReach), "0xffff00", "channel reach")
counter += 1
view += ":ObjectView {0} 0\n".format(counter)
if self.ui.checkBoxLBL.isChecked():
content += ws.lineSet.format(self.getDim(self.ui.lineEditLBL), self.getPath(self.ui.lineEditLBL), "0x00ff00", "left breakline")
counter += 1
view += ":ObjectView {0} 0\n".format(counter)
if self.ui.checkBoxRBL.isChecked():
content += ws.lineSet.format(self.getDim(self.ui.lineEditRBL), self.getPath(self.ui.lineEditRBL), "0x00ff00", "right breakline")
counter += 1
view += ":ObjectView {0} 0\n".format(counter)
if self.ui.checkBoxLBO.isChecked():
content += ws.lineSet.format(self.getDim(self.ui.lineEditLBO), self.getPath(self.ui.lineEditLBO), "0x0000ff", "left boundary")
counter += 1
view += ":ObjectView {0} 0\n".format(counter)
if self.ui.checkBoxRBO.isChecked():
content += ws.lineSet.format(self.getDim(self.ui.lineEditRBO), self.getPath(self.ui.lineEditRBO), "0x0000ff", "right boundary")
counter += 1
view += ":ObjectView {0} 0\n".format(counter)
content += ws.meshScalar.format(self.getPath(self.ui.lineEditMesh), "0xc0c0c0", "mesh")
counter += 1
view += ":ObjectView {0} 0\n".format(counter)
if self.ui.checkBoxIP.isChecked():
content += ws.lineSet.format(self.getDim(self.ui.lineEditIP), self.getPath(self.ui.lineEditIP), "0x8000ff", "interpolated profiles")
counter += 1
view += ":ObjectView {0} 1\n".format(counter)
if self.ui.checkBoxLE.isChecked():
content += ws.lineSet.format(self.getDim(self.ui.lineEditLE), self.getPath(self.ui.lineEditLE), "0x0080ff", "left edge")
counter += 1
view += ":ObjectView {0} 1\n".format(counter)
if self.ui.checkBoxRE.isChecked():
content += ws.lineSet.format(self.getDim(self.ui.lineEditRE), self.getPath(self.ui.lineEditRE), "0x0080ff", "right edge")
counter += 1
view += ":ObjectView {0} 1\n".format(counter)
if self.ui.checkBoxOL.isChecked():
content += ws.lineSet.format(self.getDim(self.ui.lineEditOL), self.getPath(self.ui.lineEditOL), "0x800080", "outline")
counter += 1
view += ":ObjectView {0} 1\n".format(counter)
content += ws.meshScalar.format(self.getPath(self.ui.lineEditMesh), "0x808080", "mesh")
counter += 1
view += ":ObjectView {0} 1\n".format(counter)
fh.writeEWS(content, view, self.ui.lineEditWS.text())
def setEnabledBL(self, checkBox, pushButton, lineEdit, spinBox):
uih.setEnabled(checkBox, pushButton, lineEdit)
checked = checkBox.isChecked()
spinBox.setEnabled(checked)
def getDim(self, lineEdit):
return lineEdit.text().split('.')[-1][1]
def getPath(self, lineEdit):
return lineEdit.text().replace('/', '\\')
def create(self):
info = "Input data:\n"
try:
nodRaw, proRaw = fh.readI3S(self.ui.lineEditProfiles.text())
info += " - Profiles:\t\t\t{0}\n".format(len(proRaw))
except:
QMessageBox.critical(self.widget, "Error", "Not able to load profiles file!\nCheck filename or content!")
return
try:
nodReach = fh.readI2S(self.ui.lineEditReach.text())[0]
info += " - Reach nodes:\t\t{0}\n".format(len(nodReach))
except:
QMessageBox.critical(self.widget, "Error", "Not able to load reach file!\nCheck filename or content!")
return
if len(proRaw) != len(nodReach):
QMessageBox.critical(self.widget, "Error", "Number of profiles must correspond to number of reach nodes!")
return
nnC = self.ui.spinBoxNNC.value()
length = self.ui.doubleSpinBoxEL.value()
nnL = None
nodLBL = None
if self.ui.checkBoxLBL.isChecked():
nnL = self.ui.spinBoxNNL.value()
try:
if self.ui.lineEditLBL.text().split(".")[-1] == "i2s":
nodLBL = fh.readI2S(self.ui.lineEditLBL.text())[0]
else:
nodLBL = fh.readI3S(self.ui.lineEditLBL.text())[0]
info += " - Left breakline nodes:\t{0}\n".format(len(nodLBL))
except:
QMessageBox.critical(self.widget, "Error", "Not able to load left breakline file!\nCheck filename or content!")
return
else:
nnL = None
nodLBL = None
nnR = None
nodRBL = None
if self.ui.checkBoxRBL.isChecked():
nnR = self.ui.spinBoxNNR.value()
try:
if self.ui.lineEditRBL.text().split(".")[-1] == "i2s":
nodRBL = fh.readI2S(self.ui.lineEditRBL.text())[0]
else:
nodRBL = fh.readI3S(self.ui.lineEditRBL.text())[0]
info += " - Right breakline nodes:\t{0}\n".format(len(nodRBL))
except:
QMessageBox.critical(self.widget, "Error", "Not able to load right breakline file!\nCheck filename or content!")
return
else:
nnR = None
nodRBL = None
nodLBO = None
if self.ui.checkBoxLBO.isChecked():
try:
if self.ui.lineEditLBO.text().split(".")[-1] == "i2s":
nodLBO = fh.readI2S(self.ui.lineEditLBO.text())[0]
else:
nodLBO = fh.readI3S(self.ui.lineEditLBO.text())[0]
info += " - Left boundary nodes:\t{0}\n".format(len(nodLBO))
except:
QMessageBox.critical(self.widget, "Error", "Not able to load left boundary file!\nCheck filename or content!")
return
else:
nodLBO = None
nodRBO = None
if self.ui.checkBoxRBO.isChecked():
try:
if self.ui.lineEditRBO.text().split(".")[-1] == "i2s":
nodRBO = fh.readI2S(self.ui.lineEditRBO.text())[0]
else:
nodRBO = fh.readI3S(self.ui.lineEditRBO.text())[0]
info += " - Right boundary nodes:\t{0}\n".format(len(nodRBO))
except:
QMessageBox.critical(self.widget, "Error", "Not able to load right boundary file!\nCheck filename or content!")
return
else:
nodRBO = None
self.mesh = CalcMesh( nodRaw,
proRaw,
nodReach,
nnC,
length,
nodLBL,
nodRBL,
nodLBO,
nodRBO,
nnL,
nnR
)
try:
info += self.mesh.determineFlowDirection()
except:
QMessageBox.critical(self.widget, "Error", "Not able to determine flow direction!\nCheck inputs!")
return
try:
info += self.mesh.normalizeProfiles()
except:
QMessageBox.critical(self.widget, "Error", "Not able to normalize profiles!\nCheck inputs!")
return
try:
info += self.mesh.interpolateChannel()
except:
QMessageBox.critical(self.widget, "Error", "Not able to interpolate channel!\nCheck inputs!")
return
try:
info += self.mesh.interpolateElevation()
except:
QMessageBox.critical(self.widget, "Error", "Not able to interpolate elevation!\nCheck inputs!")
return
if self.ui.checkBoxEC.isChecked():
try:
info += self.mesh.interpolateElevationCorrection()
except:
QMessageBox.critical(self.widget, "Error", "Not able to interpolate elevation correction!\nCheck inputs!")
return
try:
info += self.mesh.createMesh()
except:
QMessageBox.critical(self.widget, "Error", "Not able to create mesh!\nCheck inputs!")
return
try:
self.writeOutput()
except:
QMessageBox.critical(self.widget, "Error", "Not able to write output!")
return
QMessageBox.information(self.widget, "Module Mesh", info)
