def cdata(request):
'''
设备向服务器的http:://xxx/cdata请求
'''
from device_http.network import network_monitor
network_monitor(request)
encrypt = 1
response = device_response()
try:
resp = ""
from mysite import authorize_fun
language = request.REQUEST.get('language', None) #---获得语言参数
authorize_fun.check_push_device(language) #---连接设备数量控制
device = check_device(request, True) #---检测、验证当前发出请求的设备
if device is None:
response.write("UNKNOWN DEVICE")
return response
else:
if request.REQUEST.has_key('action'):
resp += "OK\n"
elif request.method == 'GET': #---设备GET请求
if request.REQUEST.has_key('PIN'): #---带人员PIN参数
resp += cdata_get_pin(request, device)
else: #--- 设备push的版本及其他一些信息的返回
alg_ver = "1.0" #--- push 默认版本
if request.REQUEST.has_key(
'pushver'): #---没有"PIN"但有"pushver" push版本参数
alg_ver = request.REQUEST.get(
'pushver'
) #2010-8-25 device字段alg_ver用来区分新老固件 >=2.0为新固件，默认为旧固件
device.alg_ver = alg_ver
device.save()
resp += cdata_get_options(device)
encrypt = 0
elif request.method == 'POST': #---设备POST请求
try:
resp += cdata_post(request, device)
except Exception, e:
resp = u"ERROR: %s" % e
errorLog(request)
else:
def cdata(request):
'''
设备向服务器的http:://xxx/cdata请求
'''
from device_http.network import network_monitor
network_monitor(request)
encrypt = 1
response = device_response()
try:
resp = ""
from mysite import authorize_fun
language=request.REQUEST.get('language',None) #---获得语言参数
authorize_fun.check_push_device(language) #---连接设备数量控制
device = check_device(request, True) #---检测、验证当前发出请求的设备
if device is None:
response.write("UNKNOWN DEVICE")
return response
else:
if request.REQUEST.has_key('action'):
resp += "OK\n"
elif request.method == 'GET': #---设备GET请求
if request.REQUEST.has_key('PIN'): #---带人员PIN参数
resp+=cdata_get_pin(request, device)
else: #--- 设备push的版本及其他一些信息的返回
alg_ver="1.0" #--- push 默认版本
if request.REQUEST.has_key('pushver'): #---没有"PIN"但有"pushver" push版本参数
alg_ver=request.REQUEST.get('pushver') #2010-8-25 device字段alg_ver用来区分新老固件 >=2.0为新固件，默认为旧固件
device.alg_ver=alg_ver
device.save()
resp+=cdata_get_options(device)
encrypt = 0
elif request.method == 'POST': #---设备POST请求
try:
resp+=cdata_post(request, device)
except Exception, e:
resp = u"ERROR: %s" % e
errorLog(request)
else:
def getreq(request):
'''
http://xxx/getrequest
设备读取服务器上存储的命令------------------------------------------------------------------
'''
from device_http.network import network_monitor
network_monitor(request)
response = device_response()
try:
resp = "" #---要直接发送的内容
device = check_device(request) #---从请求得到设备对象 不自动注册
if device is None:
response.write("UNKNOWN DEVICE")
return response
#读取服务器上存储的命令的请求都带有设备INFO信息 更新设备信息
info = request.GET.get("INFO", "") #版本号，用户数,指纹数,记录数,设备自身IP地址
if info:
sql = []
info = info.split(",")
device.fw_version = info[0] #---主版本号
device.user_count = int(info[1]) #---注册用户数
device.fp_count = int(info[2]) #---注册指纹数
device.fp_count = int(info[2])
device.transaction_count = int(info[3]) #---考勤记录数
if len(info) > 4:
device.ipaddress = info[4] #---考勤机IP地址
if device.alias == "auto_add":
device.alias = info[4] #由于网关问题，使名称对应的IP地址与机器IP不同时的更正。
if len(info) > 5:
device.Fpversion = info[5] #指纹算法版本
device.save()
# 自动升级固件功能
if not hasattr(device, "is_updating_fw"): #该设备现在没有正升级固件
fw = fwVerStd(device.fw_version)
if fw: #该设备具有固件版本号
up_version = device.get_std_fw_version() #用于升级的设备固件标准版本号
if up_version > fw: #该设备固件版本号较低
n = int(q_server.get_from_file("UPGRADE_FW_COUNT") or "0")
if n < settings.MAX_UPDATE_COUNT: #没有超出许可同时升级固件的范围
#升级固件
errMsg = dev_update_firmware(device)
if not errMsg:
device.is_updating_fw = device.last_activity
if errMsg: #升级命令错
appendFile((u"%s UPGRADE FW %s:%s" %
(device.sn, fw, errMsg)))
else:
q_server.incr("UPGRADE_FW_COUNT")
upsql = []
c = 0
const_sql = "update devcmds set CmdTransTime='%(tr)s',CmdReturn=%(cm)s where id=%(id)s"
if db_select == 4: #postgresql 数据库
const_sql = '''update devcmds set "CmdTransTime"='%(tr)s',"CmdReturn"=%(cm)s where id=%(id)s'''
elif db_select == 3: #oracle 数据库
const_sql = "update devcmds set CmdTransTime=to_date('%(tr)s','yyyy-mm-dd hh24:mi:ss'),CmdReturn=%(cm)s where id=%(id)s"
maxRet = device.max_comm_count #---每次传送给设备的命令数
maxRetSize = device.max_comm_size * 1024 #---最大数据包长度(KB)
get_sql = "select top " + str(
maxRet) + " id,CmdContent,CmdReturn from devcmds "
get_sql += " where SN_id=" + str(
device.pk
) + " and (CmdTransTime is null or (CmdReturn <=-99996 and CmdReturn>-99999)) order by id "
if db_select == 1:
get_sql = "select id,CmdContent,CmdReturn from devcmds "
get_sql += " where SN_id=" + str(
device.pk
) + " and (CmdTransTime is null or (CmdReturn <=-99996 and CmdReturn>-99999)) order by id limit " + str(
maxRet)
elif db_select == 4:
get_sql = '''select id,"CmdContent","CmdReturn" from devcmds '''
get_sql += ''' where "SN_id"=''' + str(
device.pk
) + ''' and ("CmdTransTime" is null or ("CmdReturn" <=-99996 and "CmdReturn">-99999) ) order by id limit ''' + str(
maxRet)
elif db_select == 3:
get_sql = "select id,CmdContent,CmdReturn from devcmds "
get_sql += " where SN_id=" + str(
device.pk
) + " and (CmdTransTime is null or CmdReturn <=-99996 and CmdReturn>-99999)) and ROWNUM <= " + str(
maxRet) + " ORDER BY ROWNUM ASC "
dev_cur = conn.cursor()
dev_cur.execute(get_sql)
devcmds = dev_cur.fetchall()
connection._commit()
for d in devcmds: #---循环要发送给设备的命令
cr = d[2] #---命令返回值
if cr:
cr += -1
else:
cr = -99996
if cr < -99999:
continue
if db_select == 3:
CmdContent = d[1].read()
else:
CmdContent = d[1]
if CmdContent.find("DATA UPDATE user") == 0 or CmdContent.find(
"SMS ") == 0: #传送用户命令,需要解码成GB2312
cc = CmdContent
try:
cc = cc.encode("gb18030")
except:
try:
cc = cc.decode("utf-8").encode("gb18030")
except:
errorLog(request)
else:
cc = str(CmdContent)
nowcmd = str(cc)
cc = std_cmd_convert(cc, device) #----ZK-ECO 标准命令到 PUSH-SDK 命令的转换
if cc: resp += "C:%d:%s\n" % (d[0], cc) #---格式: Ｃ:设备序列号:内容 \n
c = c + 1
if db_select == 1:
excsql("update devcmds set CmdTransTime= now() ,CmdReturn=" +
str(cr) + " where id=" + str(d[0]))
elif db_select == 3:
excsql(
const_sql % {
"tr":
datetime.datetime.now().strftime("%Y-%m-%d %H:%M:%S"),
"cm": cr,
"id": d[0]
})
else:
upsql.append(
const_sql % {
"tr":
datetime.datetime.now().strftime("%Y-%m-%d %H:%M:%S"),
"cm": cr,
"id": d[0]
})
if (c >= maxRet) or (len(resp) >= maxRetSize):
break
#达到了最大命令数或最大命令长度限制
if CmdContent in ["CHECK", "CLEAR DATA", "REBOOT", "RESTART"]:
break
#重新启动命令只能是最后一条指令 #增加查找到CHECK指令后，直接发送
if upsql:
excsql(";".join(upsql))
if db_select == 1:
excsql("update iclock set last_activity=now() where id=" +
str(device.pk))
elif db_select == 3:
excsql("update iclock set last_activity=to_date('" +
datetime.datetime.now().strftime("%Y-%m-%d %H:%M:%S") +
"','yyyy-mm-dd hh24:mi:ss') where id=" + str(device.pk))
else:
excsql("update iclock set last_activity='" +
datetime.datetime.now().strftime("%Y-%m-%d %H:%M:%S") +
"' where id=" + str(device.pk))
if c == 0: #没有发送任何命令时，简单向设备返回 "OK" 即可
resp += "OK"
except Exception, e:
resp = u"%s" % e
errorLog(request)
def getreq(request):
'''
http://xxx/getrequest
设备读取服务器上存储的命令------------------------------------------------------------------
'''
from device_http.network import network_monitor
network_monitor(request)
response = device_response()
try:
resp = "" #---要直接发送的内容
device = check_device(request) #---从请求得到设备对象 不自动注册
if device is None:
response.write("UNKNOWN DEVICE")
return response
#读取服务器上存储的命令的请求都带有设备INFO信息 更新设备信息
info = request.GET.get("INFO", "") #版本号，用户数,指纹数,记录数,设备自身IP地址
if info:
sql=[]
info = info.split(",")
device.fw_version=info[0] #---主版本号
device.user_count=int(info[1]) #---注册用户数
device.fp_count=int(info[2]) #---注册指纹数
device.fp_count=int(info[2])
device.transaction_count=int(info[3]) #---考勤记录数
if len(info)>4:
device.ipaddress=info[4] #---考勤机IP地址
if device.alias=="auto_add":
device.alias=info[4]#由于网关问题，使名称对应的IP地址与机器IP不同时的更正。
if len(info)>5:
device.Fpversion=info[5] #指纹算法版本
device.save()
# 自动升级固件功能
if not hasattr(device, "is_updating_fw"): #该设备现在没有正升级固件
fw = fwVerStd(device.fw_version)
if fw: #该设备具有固件版本号
up_version=device.get_std_fw_version() #用于升级的设备固件标准版本号
if up_version>fw: #该设备固件版本号较低
n=int(q_server.get_from_file("UPGRADE_FW_COUNT") or "0")
if n < settings.MAX_UPDATE_COUNT: #没有超出许可同时升级固件的范围
#升级固件
errMsg = dev_update_firmware(device)
if not errMsg:
device.is_updating_fw=device.last_activity
if errMsg: #升级命令错
appendFile((u"%s UPGRADE FW %s:%s" % (device.sn, fw, errMsg)))
else:
q_server.incr("UPGRADE_FW_COUNT")
upsql=[]
c=0
const_sql="update devcmds set CmdTransTime='%(tr)s',CmdReturn=%(cm)s where id=%(id)s"
if db_select==4:#postgresql 数据库
const_sql ='''update devcmds set "CmdTransTime"='%(tr)s',"CmdReturn"=%(cm)s where id=%(id)s'''
elif db_select==3:#oracle 数据库
const_sql="update devcmds set CmdTransTime=to_date('%(tr)s','yyyy-mm-dd hh24:mi:ss'),CmdReturn=%(cm)s where id=%(id)s"
maxRet = device.max_comm_count #---每次传送给设备的命令数
maxRetSize = device.max_comm_size * 1024 #---最大数据包长度(KB)
get_sql="select top "+ str(maxRet) +" id,CmdContent,CmdReturn from devcmds "
get_sql+=" where SN_id="+str(device.pk)+" and (CmdTransTime is null or (CmdReturn <=-99996 and CmdReturn>-99999)) order by id "
if db_select==1:
get_sql="select id,CmdContent,CmdReturn from devcmds "
get_sql+=" where SN_id="+str(device.pk)+" and (CmdTransTime is null or (CmdReturn <=-99996 and CmdReturn>-99999)) order by id limit "+str(maxRet)
elif db_select==4:
get_sql ='''select id,"CmdContent","CmdReturn" from devcmds '''
get_sql+=''' where "SN_id"='''+str(device.pk)+''' and ("CmdTransTime" is null or ("CmdReturn" <=-99996 and "CmdReturn">-99999) ) order by id limit '''+str(maxRet)
elif db_select==3:
get_sql="select id,CmdContent,CmdReturn from devcmds "
get_sql+=" where SN_id="+str(device.pk)+" and (CmdTransTime is null or CmdReturn <=-99996 and CmdReturn>-99999)) and ROWNUM <= "+str(maxRet)+" ORDER BY ROWNUM ASC "
dev_cur=conn.cursor()
dev_cur.execute(get_sql)
devcmds=dev_cur.fetchall()
connection._commit()
for d in devcmds: #---循环要发送给设备的命令
cr=d[2] #---命令返回值
if cr:
cr+=-1
else:
cr=-99996
if cr<-99999:
continue
if db_select==3:
CmdContent=d[1].read()
else:
CmdContent=d[1]
if CmdContent.find("DATA UPDATE user")==0 or CmdContent.find("SMS ")==0: #传送用户命令,需要解码成GB2312
cc=CmdContent
try:
cc=cc.encode("gb18030")
except:
try:
cc=cc.decode("utf-8").encode("gb18030")
except:
errorLog(request)
else:
cc=str(CmdContent)
nowcmd=str(cc)
cc=std_cmd_convert(cc, device) #----ZK-ECO 标准命令到 PUSH-SDK 命令的转换
if cc: resp+="C:%d:%s\n"%(d[0],cc) #---格式: Ｃ:设备序列号:内容 \n
c=c+1
if db_select==1:
excsql("update devcmds set CmdTransTime= now() ,CmdReturn="+str(cr)+" where id="+str(d[0]))
elif db_select==3:
excsql(const_sql%{"tr":datetime.datetime.now().strftime("%Y-%m-%d %H:%M:%S"),"cm":cr,"id":d[0]})
else:
upsql.append(const_sql%{"tr":datetime.datetime.now().strftime("%Y-%m-%d %H:%M:%S"),"cm":cr,"id":d[0]})
if (c>=maxRet) or (len(resp)>=maxRetSize): break; #达到了最大命令数或最大命令长度限制
if CmdContent in ["CHECK","CLEAR DATA","REBOOT", "RESTART"]: break; #重新启动命令只能是最后一条指令 #增加查找到CHECK指令后，直接发送
if upsql:
excsql(";".join(upsql))
if db_select==1:
excsql("update iclock set last_activity=now() where id="+str(device.pk))
elif db_select==3:
excsql("update iclock set last_activity=to_date('"+datetime.datetime.now().strftime("%Y-%m-%d %H:%M:%S")+"','yyyy-mm-dd hh24:mi:ss') where id="+str(device.pk))
else:
excsql("update iclock set last_activity='"+datetime.datetime.now().strftime("%Y-%m-%d %H:%M:%S")+"' where id="+str(device.pk))
if c == 0:#没有发送任何命令时，简单向设备返回 "OK" 即可
resp += "OK"
except Exception, e:
resp = u"%s" % e
errorLog(request)
