class Pc(Platform):
type = 'Pc'
cxx_header = "dev/x86/pc.hh"
cxx_class = 'gem5::Pc'
system = Param.System(Parent.any, "system")
south_bridge = Param.SouthBridge(SouthBridge(), "Southbridge")
pci_host = PcPciHost()
# Serial port and terminal
com_1 = Uart8250()
com_1.pio_addr = x86IOAddress(0x3f8)
com_1.device = Terminal()
# Devices to catch access to non-existant serial ports.
fake_com_2 = IsaFake(pio_addr=x86IOAddress(0x2f8), pio_size=8)
fake_com_3 = IsaFake(pio_addr=x86IOAddress(0x3e8), pio_size=8)
fake_com_4 = IsaFake(pio_addr=x86IOAddress(0x2e8), pio_size=8)
# A device to catch accesses to the non-existant floppy controller.
fake_floppy = IsaFake(pio_addr=x86IOAddress(0x3f2), pio_size=2)
# A bus for accesses not claimed by a specific device.
default_bus = IOXBar()
# A device to handle accesses to unclaimed IO ports.
empty_isa = IsaFake(pio_addr=x86IOAddress(0),
pio_size='64KiB',
ret_data8=0,
ret_data16=0,
ret_data32=0,
ret_data64=0,
pio=default_bus.mem_side_ports)
# A device to handle any other type of unclaimed access.
bad_addr = BadAddr(pio=default_bus.default)
def attachIO(self, bus, dma_ports=[]):
self.south_bridge.attachIO(bus, dma_ports)
self.com_1.pio = bus.mem_side_ports
self.fake_com_2.pio = bus.mem_side_ports
self.fake_com_3.pio = bus.mem_side_ports
self.fake_com_4.pio = bus.mem_side_ports
self.fake_floppy.pio = bus.mem_side_ports
self.pci_host.pio = bus.mem_side_ports
self.default_bus.cpu_side_ports = bus.default
class Pc(Platform):
type = 'Pc'
cxx_header = "dev/x86/pc.hh"
system = Param.System(Parent.any, "system")
south_bridge = SouthBridge()
pci_host = PcPciHost()
# "Non-existant" ports used for timing purposes by the linux kernel
i_dont_exist1 = IsaFake(pio_addr=x86IOAddress(0x80), pio_size=1)
i_dont_exist2 = IsaFake(pio_addr=x86IOAddress(0xed), pio_size=1)
# Ports behind the pci config and data regsiters. These don't do anything,
# but the linux kernel fiddles with them anway.
behind_pci = IsaFake(pio_addr=x86IOAddress(0xcf8), pio_size=8)
# Serial port and terminal
com_1 = Uart8250()
com_1.pio_addr = x86IOAddress(0x3f8)
com_1.device = Terminal()
# Devices to catch access to non-existant serial ports.
fake_com_2 = IsaFake(pio_addr=x86IOAddress(0x2f8), pio_size=8)
fake_com_3 = IsaFake(pio_addr=x86IOAddress(0x3e8), pio_size=8)
fake_com_4 = IsaFake(pio_addr=x86IOAddress(0x2e8), pio_size=8)
# A device to catch accesses to the non-existant floppy controller.
fake_floppy = IsaFake(pio_addr=x86IOAddress(0x3f2), pio_size=2)
# NVMe Interface
nvme = NVMeInterface(pci_func=0, pci_dev=5, pci_bus=0)
def attachIO(self, bus, dma_ports=[]):
self.south_bridge.attachIO(bus, dma_ports)
self.i_dont_exist1.pio = bus.master
self.i_dont_exist2.pio = bus.master
self.behind_pci.pio = bus.master
self.com_1.pio = bus.master
self.fake_com_2.pio = bus.master
self.fake_com_3.pio = bus.master
self.fake_com_4.pio = bus.master
self.fake_floppy.pio = bus.master
self.pci_host.pio = bus.default
self.nvme.pio = bus.master
if dma_ports.count(self.nvme.dma) == 0:
self.nvme.dma = bus.slave
class VExpress_EMM(RealView):
_mem_regions = [ AddrRange('2GB', size='2GB') ]
# Ranges based on excluding what is part of on-chip I/O (gic,
# a9scu)
_off_chip_ranges = [AddrRange(0x2F000000, size='16MB'),
AddrRange(0x30000000, size='256MB'),
AddrRange(0x40000000, size='512MB'),
AddrRange(0x18000000, size='64MB'),
AddrRange(0x1C000000, size='64MB')]
# Platform control device (off-chip)
realview_io = RealViewCtrl(proc_id0=0x14000000, proc_id1=0x14000000,
idreg=0x02250000, pio_addr=0x1C010000)
mcc = VExpressMCC()
dcc = CoreTile2A15DCC()
### On-chip devices ###
gic = Gic400(dist_addr=0x2C001000, cpu_addr=0x2C002000)
vgic = VGic(vcpu_addr=0x2c006000, hv_addr=0x2c004000, maint_int=25)
local_cpu_timer = CpuLocalTimer(int_timer=ArmPPI(num=29),
int_watchdog=ArmPPI(num=30),
pio_addr=0x2C080000)
hdlcd = HDLcd(pxl_clk=dcc.osc_pxl,
pio_addr=0x2b000000, int_num=117,
workaround_swap_rb=True)
def _on_chip_devices(self):
devices = [
self.gic, self.vgic,
self.local_cpu_timer
]
if hasattr(self, "gicv2m"):
devices.append(self.gicv2m)
devices.append(self.hdlcd)
return devices
def _on_chip_memory(self):
memories = [
self.bootmem,
]
return memories
### Off-chip devices ###
uart = Pl011(pio_addr=0x1c090000, int_num=37)
pci_host = GenericPciHost(
conf_base=0x30000000, conf_size='256MB', conf_device_bits=16,
pci_pio_base=0)
generic_timer = GenericTimer(int_phys_s=ArmPPI(num=29),
int_phys_ns=ArmPPI(num=30),
int_virt=ArmPPI(num=27),
int_hyp=ArmPPI(num=26))
timer0 = Sp804(int_num0=34, int_num1=34, pio_addr=0x1C110000, clock0='1MHz', clock1='1MHz')
timer1 = Sp804(int_num0=35, int_num1=35, pio_addr=0x1C120000, clock0='1MHz', clock1='1MHz')
clcd = Pl111(pio_addr=0x1c1f0000, int_num=46)
kmi0 = Pl050(pio_addr=0x1c060000, int_num=44, ps2=PS2Keyboard())
kmi1 = Pl050(pio_addr=0x1c070000, int_num=45, ps2=PS2TouchKit())
cf_ctrl = IdeController(disks=[], pci_func=0, pci_dev=0, pci_bus=2,
io_shift = 2, ctrl_offset = 2, Command = 0x1,
BAR0 = 0x1C1A0000, BAR0Size = '256B',
BAR1 = 0x1C1A0100, BAR1Size = '4096B',
BAR0LegacyIO = True, BAR1LegacyIO = True)
bootmem = SimpleMemory(range = AddrRange('64MB'),
conf_table_reported = False)
vram = SimpleMemory(range = AddrRange(0x18000000, size='32MB'),
conf_table_reported = False)
rtc = PL031(pio_addr=0x1C170000, int_num=36)
l2x0_fake = IsaFake(pio_addr=0x2C100000, pio_size=0xfff)
uart1_fake = AmbaFake(pio_addr=0x1C0A0000)
uart2_fake = AmbaFake(pio_addr=0x1C0B0000)
uart3_fake = AmbaFake(pio_addr=0x1C0C0000)
sp810_fake = AmbaFake(pio_addr=0x1C020000, ignore_access=True)
watchdog_fake = AmbaFake(pio_addr=0x1C0F0000)
aaci_fake = AmbaFake(pio_addr=0x1C040000)
lan_fake = IsaFake(pio_addr=0x1A000000, pio_size=0xffff)
usb_fake = IsaFake(pio_addr=0x1B000000, pio_size=0x1ffff)
mmc_fake = AmbaFake(pio_addr=0x1c050000)
energy_ctrl = EnergyCtrl(pio_addr=0x1c080000)
def _off_chip_devices(self):
devices = [
self.uart,
self.realview_io,
self.pci_host,
self.timer0,
self.timer1,
self.clcd,
self.kmi0,
self.kmi1,
self.cf_ctrl,
self.rtc,
self.vram,
self.l2x0_fake,
self.uart1_fake,
self.uart2_fake,
self.uart3_fake,
self.sp810_fake,
self.watchdog_fake,
self.aaci_fake,
self.lan_fake,
self.usb_fake,
self.mmc_fake,
self.energy_ctrl,
]
# Try to attach the I/O if it exists
if hasattr(self, "ide"):
devices.append(self.ide)
if hasattr(self, "ethernet"):
devices.append(self.ethernet)
return devices
# Attach any PCI devices that are supported
def attachPciDevices(self):
self.ethernet = IGbE_e1000(pci_bus=0, pci_dev=0, pci_func=0,
InterruptLine=1, InterruptPin=1)
self.ide = IdeController(disks = [], pci_bus=0, pci_dev=1, pci_func=0,
InterruptLine=2, InterruptPin=2)
def enableMSIX(self):
self.gic = Gic400(dist_addr=0x2C001000, cpu_addr=0x2C002000,
it_lines=512)
self.gicv2m = Gicv2m()
self.gicv2m.frames = [Gicv2mFrame(spi_base=256, spi_len=64, addr=0x2C1C0000)]
def setupBootLoader(self, cur_sys, loc):
if not cur_sys.boot_loader:
cur_sys.boot_loader = loc('boot_emm.arm')
cur_sys.atags_addr = 0x8000000
cur_sys.load_offset = 0x80000000
class RealViewPBX(RealView):
uart = Pl011(pio_addr=0x10009000, int_num=44)
realview_io = RealViewCtrl(pio_addr=0x10000000)
mcc = VExpressMCC()
dcc = CoreTile2A15DCC()
gic = Gic400(cpu_addr=0x1f000100, dist_addr=0x1f001000, cpu_size=0x100)
pci_host = GenericPciHost(
conf_base=0x30000000, conf_size='256MB', conf_device_bits=16,
pci_pio_base=0)
timer0 = Sp804(int_num0=36, int_num1=36, pio_addr=0x10011000)
timer1 = Sp804(int_num0=37, int_num1=37, pio_addr=0x10012000)
global_timer = A9GlobalTimer(int_num=27, pio_addr=0x1f000200)
local_cpu_timer = CpuLocalTimer(int_timer=ArmPPI(num=29),
int_watchdog=ArmPPI(num=30),
pio_addr=0x1f000600)
clcd = Pl111(pio_addr=0x10020000, int_num=55)
kmi0 = Pl050(pio_addr=0x10006000, int_num=52, ps2=PS2Keyboard())
kmi1 = Pl050(pio_addr=0x10007000, int_num=53, ps2=PS2TouchKit())
a9scu = A9SCU(pio_addr=0x1f000000)
cf_ctrl = IdeController(disks=[], pci_func=0, pci_dev=7, pci_bus=2,
io_shift = 1, ctrl_offset = 2, Command = 0x1,
BAR0 = 0x18000000, BAR0Size = '16B',
BAR1 = 0x18000100, BAR1Size = '1B',
BAR0LegacyIO = True, BAR1LegacyIO = True)
l2x0_fake = IsaFake(pio_addr=0x1f002000, pio_size=0xfff)
flash_fake = IsaFake(pio_addr=0x40000000, pio_size=0x20000000,
fake_mem=True)
dmac_fake = AmbaFake(pio_addr=0x10030000)
uart1_fake = AmbaFake(pio_addr=0x1000a000)
uart2_fake = AmbaFake(pio_addr=0x1000b000)
uart3_fake = AmbaFake(pio_addr=0x1000c000)
smc_fake = AmbaFake(pio_addr=0x100e1000)
sp810_fake = AmbaFake(pio_addr=0x10001000, ignore_access=True)
watchdog_fake = AmbaFake(pio_addr=0x10010000)
gpio0_fake = AmbaFake(pio_addr=0x10013000)
gpio1_fake = AmbaFake(pio_addr=0x10014000)
gpio2_fake = AmbaFake(pio_addr=0x10015000)
ssp_fake = AmbaFake(pio_addr=0x1000d000)
sci_fake = AmbaFake(pio_addr=0x1000e000)
aaci_fake = AmbaFake(pio_addr=0x10004000)
mmc_fake = AmbaFake(pio_addr=0x10005000)
rtc = PL031(pio_addr=0x10017000, int_num=42)
energy_ctrl = EnergyCtrl(pio_addr=0x1000f000)
# Attach I/O devices that are on chip and also set the appropriate
# ranges for the bridge
def attachOnChipIO(self, bus, bridge):
self.gic.pio = bus.master
self.l2x0_fake.pio = bus.master
self.a9scu.pio = bus.master
self.global_timer.pio = bus.master
self.local_cpu_timer.pio = bus.master
# Bridge ranges based on excluding what is part of on-chip I/O
# (gic, l2x0, a9scu, local_cpu_timer)
bridge.ranges = [AddrRange(self.realview_io.pio_addr,
self.a9scu.pio_addr - 1),
AddrRange(self.flash_fake.pio_addr,
self.flash_fake.pio_addr + \
self.flash_fake.pio_size - 1)]
# Set the clock domain for IO objects that are considered
# to be "close" to the cores.
def onChipIOClkDomain(self, clkdomain):
self.gic.clk_domain = clkdomain
self.l2x0_fake.clk_domain = clkdomain
self.a9scu.clkdomain = clkdomain
self.local_cpu_timer.clk_domain = clkdomain
# Attach I/O devices to specified bus object. Can't do this
# earlier, since the bus object itself is typically defined at the
# System level.
def attachIO(self, bus):
self.uart.pio = bus.master
self.realview_io.pio = bus.master
self.pci_host.pio = bus.master
self.timer0.pio = bus.master
self.timer1.pio = bus.master
self.clcd.pio = bus.master
self.clcd.dma = bus.slave
self.kmi0.pio = bus.master
self.kmi1.pio = bus.master
self.cf_ctrl.pio = bus.master
self.cf_ctrl.dma = bus.slave
self.dmac_fake.pio = bus.master
self.uart1_fake.pio = bus.master
self.uart2_fake.pio = bus.master
self.uart3_fake.pio = bus.master
self.smc_fake.pio = bus.master
self.sp810_fake.pio = bus.master
self.watchdog_fake.pio = bus.master
self.gpio0_fake.pio = bus.master
self.gpio1_fake.pio = bus.master
self.gpio2_fake.pio = bus.master
self.ssp_fake.pio = bus.master
self.sci_fake.pio = bus.master
self.aaci_fake.pio = bus.master
self.mmc_fake.pio = bus.master
self.rtc.pio = bus.master
self.flash_fake.pio = bus.master
self.energy_ctrl.pio = bus.master
# Set the clock domain for IO objects that are considered
# to be "far" away from the cores.
def offChipIOClkDomain(self, clkdomain):
self.uart.clk_domain = clkdomain
self.realview_io.clk_domain = clkdomain
self.timer0.clk_domain = clkdomain
self.timer1.clk_domain = clkdomain
self.clcd.clk_domain = clkdomain
self.kmi0.clk_domain = clkdomain
self.kmi1.clk_domain = clkdomain
self.cf_ctrl.clk_domain = clkdomain
self.dmac_fake.clk_domain = clkdomain
self.uart1_fake.clk_domain = clkdomain
self.uart2_fake.clk_domain = clkdomain
self.uart3_fake.clk_domain = clkdomain
self.smc_fake.clk_domain = clkdomain
self.sp810_fake.clk_domain = clkdomain
self.watchdog_fake.clk_domain = clkdomain
self.gpio0_fake.clk_domain = clkdomain
self.gpio1_fake.clk_domain = clkdomain
self.gpio2_fake.clk_domain = clkdomain
self.ssp_fake.clk_domain = clkdomain
self.sci_fake.clk_domain = clkdomain
self.aaci_fake.clk_domain = clkdomain
self.mmc_fake.clk_domain = clkdomain
self.rtc.clk_domain = clkdomain
self.flash_fake.clk_domain = clkdomain
self.energy_ctrl.clk_domain = clkdomain
class Tsunami(Platform):
type = 'Tsunami'
cxx_header = "dev/alpha/tsunami.hh"
system = Param.System(Parent.any, "system")
cchip = TsunamiCChip(pio_addr=0x801a0000000)
pchip = TsunamiPChip(pio_addr=0x80180000000)
fake_sm_chip = IsaFake(pio_addr=0x801fc000370)
fake_uart1 = IsaFake(pio_addr=0x801fc0002f8)
fake_uart2 = IsaFake(pio_addr=0x801fc0003e8)
fake_uart3 = IsaFake(pio_addr=0x801fc0002e8)
fake_uart4 = IsaFake(pio_addr=0x801fc0003f0)
fake_ppc = IsaFake(pio_addr=0x801fc0003bb)
fake_OROM = IsaFake(pio_addr=0x800000a0000, pio_size=0x60000)
fake_pnp_addr = IsaFake(pio_addr=0x801fc000279)
fake_pnp_write = IsaFake(pio_addr=0x801fc000a79)
fake_pnp_read0 = IsaFake(pio_addr=0x801fc000203)
fake_pnp_read1 = IsaFake(pio_addr=0x801fc000243)
fake_pnp_read2 = IsaFake(pio_addr=0x801fc000283)
fake_pnp_read3 = IsaFake(pio_addr=0x801fc0002c3)
fake_pnp_read4 = IsaFake(pio_addr=0x801fc000303)
fake_pnp_read5 = IsaFake(pio_addr=0x801fc000343)
fake_pnp_read6 = IsaFake(pio_addr=0x801fc000383)
fake_pnp_read7 = IsaFake(pio_addr=0x801fc0003c3)
fake_ata0 = IsaFake(pio_addr=0x801fc0001f0)
fake_ata1 = IsaFake(pio_addr=0x801fc000170)
fb = BadDevice(pio_addr=0x801fc0003d0, devicename='FrameBuffer')
io = TsunamiIO(pio_addr=0x801fc000000)
uart = Uart8250(pio_addr=0x801fc0003f8)
backdoor = AlphaBackdoor(pio_addr=0x80200000000, disk=Parent.simple_disk)
# Attach I/O devices to specified bus object. Can't do this
# earlier, since the bus object itself is typically defined at the
# System level.
def attachIO(self, bus):
self.cchip.pio = bus.master
self.pchip.pio = bus.master
self.fake_sm_chip.pio = bus.master
self.fake_uart1.pio = bus.master
self.fake_uart2.pio = bus.master
self.fake_uart3.pio = bus.master
self.fake_uart4.pio = bus.master
self.fake_ppc.pio = bus.master
self.fake_OROM.pio = bus.master
self.fake_pnp_addr.pio = bus.master
self.fake_pnp_write.pio = bus.master
self.fake_pnp_read0.pio = bus.master
self.fake_pnp_read1.pio = bus.master
self.fake_pnp_read2.pio = bus.master
self.fake_pnp_read3.pio = bus.master
self.fake_pnp_read4.pio = bus.master
self.fake_pnp_read5.pio = bus.master
self.fake_pnp_read6.pio = bus.master
self.fake_pnp_read7.pio = bus.master
self.fake_ata0.pio = bus.master
self.fake_ata1.pio = bus.master
self.fb.pio = bus.master
self.io.pio = bus.master
self.uart.pio = bus.master
self.backdoor.pio = bus.master
class T1000(Platform):
type = 'T1000'
cxx_header = "dev/sparc/t1000.hh"
system = Param.System(Parent.any, "system")
fake_clk = IsaFake(pio_addr=0x9600000000, pio_size=0x100000000)
#warn_access="Accessing Clock Unit -- Unimplemented!")
fake_membnks = IsaFake(pio_addr=0x9700000000,
pio_size=16384,
ret_data64=0x0000000000000000,
update_data=False)
#warn_access="Accessing Memory Banks -- Unimplemented!")
fake_jbi = IsaFake(pio_addr=0x8000000000, pio_size=0x100000000)
#warn_access="Accessing JBI -- Unimplemented!")
fake_l2_1 = IsaFake(pio_addr=0xA900000000,
pio_size=0x8,
ret_data64=0x0000000000000001,
update_data=True)
#warn_access="Accessing L2 Cache Banks -- Unimplemented!")
fake_l2_2 = IsaFake(pio_addr=0xA900000040,
pio_size=0x8,
ret_data64=0x0000000000000001,
update_data=True)
#warn_access="Accessing L2 Cache Banks -- Unimplemented!")
fake_l2_3 = IsaFake(pio_addr=0xA900000080,
pio_size=0x8,
ret_data64=0x0000000000000001,
update_data=True)
#warn_access="Accessing L2 Cache Banks -- Unimplemented!")
fake_l2_4 = IsaFake(pio_addr=0xA9000000C0,
pio_size=0x8,
ret_data64=0x0000000000000001,
update_data=True)
#warn_access="Accessing L2 Cache Banks -- Unimplemented!")
fake_l2esr_1 = IsaFake(pio_addr=0xAB00000000,
pio_size=0x8,
ret_data64=0x0000000000000000,
update_data=True)
#warn_access="Accessing L2 ESR Cache Banks -- Unimplemented!")
fake_l2esr_2 = IsaFake(pio_addr=0xAB00000040,
pio_size=0x8,
ret_data64=0x0000000000000000,
update_data=True)
#warn_access="Accessing L2 ESR Cache Banks -- Unimplemented!")
fake_l2esr_3 = IsaFake(pio_addr=0xAB00000080,
pio_size=0x8,
ret_data64=0x0000000000000000,
update_data=True)
#warn_access="Accessing L2 ESR Cache Banks -- Unimplemented!")
fake_l2esr_4 = IsaFake(pio_addr=0xAB000000C0,
pio_size=0x8,
ret_data64=0x0000000000000000,
update_data=True)
#warn_access="Accessing L2 ESR Cache Banks -- Unimplemented!")
fake_ssi = IsaFake(pio_addr=0xff00000000, pio_size=0x10000000)
#warn_access="Accessing SSI -- Unimplemented!")
hterm = Terminal()
hvuart = Uart8250(pio_addr=0xfff0c2c000)
htod = DumbTOD()
pterm = Terminal()
puart0 = Uart8250(pio_addr=0x1f10000000)
iob = Iob()
# Attach I/O devices that are on chip
def attachOnChipIO(self, bus):
self.iob.pio = bus.master
self.htod.pio = bus.master
# Attach I/O devices to specified bus object. Can't do this
# earlier, since the bus object itself is typically defined at the
# System level.
def attachIO(self, bus):
self.hvuart.device = self.hterm
self.puart0.device = self.pterm
self.fake_clk.pio = bus.master
self.fake_membnks.pio = bus.master
self.fake_l2_1.pio = bus.master
self.fake_l2_2.pio = bus.master
self.fake_l2_3.pio = bus.master
self.fake_l2_4.pio = bus.master
self.fake_l2esr_1.pio = bus.master
self.fake_l2esr_2.pio = bus.master
self.fake_l2esr_3.pio = bus.master
self.fake_l2esr_4.pio = bus.master
self.fake_ssi.pio = bus.master
self.fake_jbi.pio = bus.master
self.puart0.pio = bus.master
self.hvuart.pio = bus.master