def test_legend():
legend = Legend.from_csv(csv_text)
assert legend[0].colour == '#f7e9a6'
assert legend.max_width == 5
assert legend.__str__() != ''
assert legend.__repr__() != ''
rock = Component(r)
assert legend.get_colour(rock) == '#eeeeee'
rock3 = Component(r3)
assert legend.get_colour(rock3) == '#ffdbba'
assert legend.get_width(rock3) == 3.0
c = legend.get_component('#f7e9a6')
assert c.lithology == 'sandstone'
colours = [d.colour for d in legend]
assert len(colours) == 8
l = Legend.random([rock, rock3])
assert l != legend
assert getattr(l[-1], 'colour') != ''
assert l.to_csv() != ''
summed = legend + l
assert len(summed) == 10
def test_legend():
"""Test all the basics.
"""
legend = Legend.from_csv(csv_text)
assert legend[0].colour == '#f7e9a6'
assert legend.max_width == 5
assert legend.__str__() != ''
assert legend.__repr__() != ''
assert len(legend[[3, 4]]) == 2
assert len(legend[3:5]) == 2
rock = Component(r)
assert legend.get_colour(rock) == '#eeeeee'
assert rock not in legend
d = Decor({'colour': 'red',
'component': rock})
length = len(legend)
legend[3] = d
assert len(legend) == length
assert legend[3].component == rock
assert d in legend
rock3 = Component(r3)
assert legend.get_colour(rock3) == '#ffdbba'
assert legend.get_width(rock3) == 3.0
c = legend.get_component('#f7e9a6')
assert c.lithology == 'sandstone'
c2 = legend.get_component('#f7e9a7', tolerance=30)
assert c2.lithology == 'sandstone'
colours = [d.colour for d in legend]
assert len(colours) == 8
assert Legend.random(rock3)[0].colour != ''
l = Legend.random([rock, rock3])
assert len(l) == 2
assert getattr(l[-1], 'colour') != ''
assert l.to_csv() != ''
assert l.max_width == 0
l = Legend.random([rock, rock3], width=True, colour='#abcdef')
assert getattr(l[0], 'colour') == '#abcdef'
# Test sums.
summed = legend + l
assert len(summed) == 10
summed_again = legend + d
assert len(summed_again) == 9
summed_again_again = d + legend
assert len(summed_again_again) == 9
# Test equality.
assert not d == legend
def test_duplicate_warning(recwarn):
"""Test warning triggers if duplicate component in CSV.
"""
Legend.from_csv(csv_duplicate)
w = recwarn.pop()
assert issubclass(w.category, UserWarning)
assert 'duplicate' in str(w.message)
assert w.lineno
def test_legend_builtins():
"""Test the builtins.
"""
assert len(Legend.builtin('nsdoe')) == 18
assert len(Legend.builtin('nagmdm__6_2')) == 206
# And builtin timescale.
assert len(Legend.builtin_timescale('isc')) == 240
def test_duplicate_warning(recwarn):
"""Test warning triggers if duplicate component in CSV.
"""
Legend.from_csv(text=csv_duplicate)
w = recwarn.pop()
assert issubclass(w.category, UserWarning)
assert 'duplicate' in str(w.message)
assert w.lineno
def test_legend_builtins():
"""Test the builtins.
"""
assert len(Legend.builtin('nsdoe')) == 18
assert len(Legend.builtin('nagmdm__6_2')) == 206
# And builtin timescale.
assert len(Legend.builtin_timescale('isc')) == 240
def test_legend():
"""Test all the basics.
"""
legend = Legend.from_csv(text=csv_text)
assert legend[0].colour == '#f7e9a6'
assert legend.max_width == 5
assert legend.__str__() != ''
assert legend.__repr__() != ''
assert len(legend[[3, 4]]) == 2
assert len(legend[3:5]) == 2
rock = Component(r)
assert legend.get_colour(rock) == '#eeeeee'
assert rock not in legend
d = Decor({'colour': 'red', 'component': rock})
length = len(legend)
legend[3] = d
assert len(legend) == length
assert legend[3].component == rock
assert d in legend
rock3 = Component(r3)
assert legend.get_colour(rock3) == '#ffdbba'
assert legend.get_width(rock3) == 3.0
c = legend.get_component('#f7e9a6')
assert c.lithology == 'sandstone'
c2 = legend.get_component('#f7e9a7', tolerance=30)
assert c2.lithology == 'sandstone'
colours = [d.colour for d in legend]
assert len(colours) == 8
assert Legend.random(rock3)[0].colour != ''
l = Legend.random([rock, rock3])
assert len(l) == 2
assert getattr(l[-1], 'colour') != ''
assert l.to_csv() != ''
assert l.max_width == 0
l = Legend.random([rock, rock3], width=True, colour='#abcdef')
assert getattr(l[0], 'colour') == '#abcdef'
# Test sums.
summed = legend + l
assert len(summed) == 10
summed_again = legend + d
assert len(summed_again) == 9
summed_again_again = d + legend
assert len(summed_again_again) == 9
# Test equality.
assert not d == legend
def test_error():
"""Test errors are raised.
"""
rock = Component(r)
# No component
with pytest.raises(LegendError):
Decor({'colour': 'red'})
# No decoration
with pytest.raises(LegendError):
Decor({'component': rock})
# Bad colour
with pytest.raises(LegendError):
Decor({'colour': 'blurple',
'component': rock})
# Adding incompatible things
legend = Legend.from_csv(csv_text)
with pytest.raises(LegendError):
legend + rock
# Tolerance not allowed.
with pytest.raises(LegendError):
legend.get_component('#f7e9a7', tolerance=-1)
def test_error():
"""Test errors are raised.
"""
rock = Component(r)
# No component
with pytest.raises(LegendError):
Decor({'colour': 'red'})
# No decoration
with pytest.raises(LegendError):
Decor({'component': rock})
# Bad colour
with pytest.raises(LegendError):
Decor({'colour': 'blurple', 'component': rock})
# Adding incompatible things
legend = Legend.from_csv(csv_text)
with pytest.raises(LegendError):
legend + rock
# Tolerance not allowed.
with pytest.raises(LegendError):
legend.get_component('#f7e9a7', tolerance=-1)
def test_from_image():
legend = Legend.builtin("NSDOE")
imgfile = "tutorial/M-MG-70_14.3_135.9.png"
striplog = Striplog.from_img(imgfile, 200, 300, legend=legend)
assert len(striplog) == 26
assert striplog[-1].primary.summary() == "Volcanic"
assert np.floor(striplog.find("sandstone").cum) == 15
assert striplog.depth(260).primary.lithology == "siltstone"
assert striplog.to_las3() is not ""
assert striplog.to_log()[5] == 2.0
assert striplog.cum == 100.0
assert striplog.thickest().primary.lithology == "anhydrite"
assert striplog.thickest(n=7)[1].primary.lithology == "sandstone"
assert striplog.thinnest().primary.lithology == "dolomite"
assert striplog.thinnest(n=7)[1].primary.lithology == "siltstone"
indices = [2, 7, 20]
del striplog[indices]
assert len(striplog.find_gaps()) == len(indices)
striplog.prune(limit=1.0)
assert len(striplog) == 14
striplog.anneal()
assert not striplog.find_gaps() # Should be None
rock = striplog.find("sandstone")[1].components[0]
assert rock in striplog
def test_striplog_intersect():
"""Test intersection. This example is from the tutorial.
"""
chrono = Striplog([
Interval(**{
'top': 0,
'base': 60,
'components': [Component({'age': 'Holocene'})]
}),
Interval(
**{
'top': 60,
'base': 75,
'components': [Component({'age': 'Palaeogene'})]
}),
Interval(
**{
'top': 75,
'base': 100,
'components': [Component({'age': 'Cretaceous'})]
}),
])
legend = Legend.builtin('NSDOE')
imgfile = "tutorial/M-MG-70_14.3_135.9.png"
strip = Striplog.from_image(imgfile, 14.3, 135.9, legend=legend)
sands = strip.find('sandstone')
cretaceous = chrono.find('Palaeogene')
cret_sand = sands.intersect(cretaceous)
assert len(cret_sand) == 3
assert cret_sand.stop.z == 75
def test_from_image():
legend = Legend.builtin('NSDOE')
imgfile = "tutorial/M-MG-70_14.3_135.9.png"
striplog = Striplog.from_img(imgfile, 200, 300, legend=legend)
assert len(striplog) == 26
assert striplog[-1].primary.summary() == 'Volcanic'
assert np.floor(striplog.find('sandstone').cum) == 15
assert striplog.depth(260).primary.lithology == 'siltstone'
assert striplog.to_las3() is not ''
assert striplog.to_log()[5] == 2.0
assert striplog.cum == 100.0
assert striplog.thickest().primary.lithology == 'anhydrite'
assert striplog.thickest(n=7)[1].primary.lithology == 'sandstone'
assert striplog.thinnest().primary.lithology == 'dolomite'
assert striplog.thinnest(n=7)[1].primary.lithology == 'siltstone'
indices = [2, 7, 20]
del striplog[indices]
assert len(striplog.find_gaps()) == len(indices)
striplog.prune(limit=1.0)
assert len(striplog) == 14
striplog.anneal()
assert not striplog.find_gaps() # Should be None
rock = striplog.find('sandstone')[1].components[0]
assert rock in striplog
def test_tolerance_warning(recwarn):
"""Test warning triggers if tolerance too low.
"""
legend = Legend.from_csv(text=csv_text)
legend.get_component('#f7e9a7', tolerance=0)
w = recwarn.pop()
assert issubclass(w.category, UserWarning)
assert 'tolerance of 0' in str(w.message)
assert w.lineno
def test_warning(recwarn):
"""Test warning triggers if tolerance too low.
"""
legend = Legend.from_csv(csv_text)
legend.get_component('#f7e9a7', tolerance=0)
w = recwarn.pop()
assert issubclass(w.category, UserWarning)
assert 'tolerance of 0' in str(w.message)
assert w.lineno
def test_bar():
"""Test bar plot.
"""
fig, ax = plt.subplots()
lexicon = Lexicon.default()
striplog = Striplog.from_las3(las3, lexicon=lexicon)
legend = Legend.builtin('nagmdm__6_2')
ax = striplog.bar(sort=True, legend=legend, ax=ax, align='center')
return fig
def __init__(self,
intervals=None,
components=None,
name='',
legend=None,
x_collar=0.,
y_collar=0.):
"""
build a Borehole3D object from Striplog.Intervals list
Parameters
-----------
intervals : list
list of Striplog.Interval object (default = None)
components :
(default = None)
name : str
legend : Striplog Legend object (default = None)
x_collar : float
X coordinate of the borehole (default = 0)
y_collar : float
Y coordinate of the borehole (default = 0)
"""
self.name = name
if legend is None or not isinstance(legend, Legend):
self.legend = Legend.default()
else:
self.legend = legend
self.x_collar = x_collar
self.y_collar = y_collar
self.omf_legend, self.omf_cmap = striplog_legend_to_omf_legend(
self.legend)
if intervals is None:
lexicon = Lexicon.default()
with open(ROOT_DIR + '/data/test.las', 'r') as las3:
default_intv = Striplog.from_las3(las3.read(), lexicon)
intervals = list(default_intv)
print("Pay attention that default intervals are actually used !\n")
self.intervals = intervals
self.geometry = []
# instantiation with supers properties
Striplog.__init__(self, list_of_Intervals=self.intervals)
# self.uid=uuid #get a unique for identification of borehole in the project
self.build_geometry()
def test_legend():
"""Test all the basics.
"""
legend = Legend.from_csv(csv_text)
assert legend[0].colour == '#f7e9a6'
assert legend.max_width == 5
assert legend.__str__() != ''
assert legend.__repr__() != ''
assert len(legend[[3, 4]]) == 2
assert len(legend[3:5]) == 2
rock = Component(r)
assert legend.get_colour(rock) == '#eeeeee'
assert rock not in legend
d = Decor({'colour': 'red', 'component': rock})
length = len(legend)
legend[3] = d
assert len(legend) == length
assert legend[3].component == rock
assert d in legend
rock3 = Component(r3)
assert legend.get_colour(rock3) == '#ffdbba'
assert legend.get_width(rock3) == 3.0
c = legend.get_component('#f7e9a6')
assert c.lithology == 'sandstone'
c2 = legend.get_component('#f7e9a7', tolerance=30)
assert c2.lithology == 'sandstone'
colours = [d.colour for d in legend]
assert len(colours) == 8
l = Legend.random([rock, rock3])
assert l != legend
assert getattr(l[-1], 'colour') != ''
assert l.to_csv() != ''
summed = legend + l
assert len(summed) == 10
def test_striplog_plot():
"""
Tests mpl image of striplog.
"""
legend = Legend.builtin('NSDOE')
imgfile = "tutorial/M-MG-70_14.3_135.9.png"
striplog = Striplog.from_img(imgfile, 14.3, 135.9, legend=legend)
fig = striplog.thickest(n=5).plot(legend=legend, return_fig=True)
return fig
def test_striplog_plot():
"""
Tests mpl image of striplog
"""
legend = Legend.default()
imgfile = "tutorial/M-MG-70_14.3_135.9.png"
striplog = Striplog.from_img(imgfile, 14.3, 135.9, legend=legend)
fig = striplog.thickest(n=5).plot(legend=legend)
return fig
def test_striplog_plot():
"""
Tests mpl image of striplog
"""
legend = Legend.builtin("NSDOE")
imgfile = "tutorial/M-MG-70_14.3_135.9.png"
striplog = Striplog.from_img(imgfile, 14.3, 135.9, legend=legend)
fig = striplog.thickest(n=5).plot(legend=legend, return_fig=True)
return fig
def test_from_image():
"""Test the generation of a striplog from an image.
"""
legend = Legend.builtin('NSDOE')
imgfile = "tutorial/M-MG-70_14.3_135.9.png"
striplog = Striplog.from_image(imgfile, 200, 300, legend=legend)
assert len(striplog) == 26
assert striplog[-1].primary.summary() == 'Volcanic'
assert np.floor(striplog.find('sandstone').cum) == 15
assert striplog.read_at(260).primary.lithology == 'siltstone'
assert striplog.to_las3() != ''
assert striplog.cum == 100.0
assert striplog.thickest().primary.lithology == 'anhydrite'
assert striplog.thickest(n=7)[1].primary.lithology == 'sandstone'
assert striplog.thinnest().primary.lithology == 'dolomite'
assert striplog.thinnest(n=7)[1].primary.lithology == 'siltstone'
# To and from log.
log, basis, table = striplog.to_log(step=0.1524, return_meta=True)
assert log[5] == 2.0
strip = Striplog.from_log(log, basis=basis, components=table)
assert len(strip) == len(striplog)
strip2 = Striplog.from_log(log, basis=basis, cutoff=3, legend=legend)
assert len(strip2) == 18
# Extract log onto striplog.
striplog.extract(log, basis=basis, name="Log", function=np.mean)
assert striplog[0].data['Log'] == 2.0
# Indexing.
indices = [2, 7, 20]
del striplog[indices]
assert len(striplog.find_gaps()) == len(indices)
# Prune and anneal.
striplog = striplog.prune(limit=1.0, keep_ends=True)
assert len(striplog) == 14
striplog = striplog.anneal()
assert not striplog.find_gaps() # Should be None
striplog = striplog.merge_neighbours()
assert len(striplog) == 11
rock = striplog.find('sandstone')[1].components[0]
assert rock in striplog
# Anneal up or down
s = striplog[[1, 3]]
assert s.anneal(mode='up')[1].top.z == s[0].base.z
assert s.anneal(mode='down')[0].base.z == s[1].top.z
def test_error():
"""Test errors are raised.
"""
rock = Component(r)
# Adding incompatible things
legend = Legend.from_csv(csv_text)
with pytest.raises(LegendError):
_ = legend + rock
assert _
# Tolerance not allowed.
with pytest.raises(LegendError):
legend.get_component('#f7e9a7', tolerance=-1)
def test_striplog_ladder_plot():
"""
Tests mpl image of striplog with the ladder option.
"""
legend = Legend.builtin('NSDOE')
imgfile = "tutorial/M-MG-70_14.3_135.9.png"
striplog = Striplog.from_image(imgfile, 14.3, 135.9, legend=legend)
fig = striplog.thickest(n=5).plot(legend=legend,
ladder=True,
return_fig=True)
return fig
def test_error():
"""Test errors are raised.
"""
rock = Component(r)
# Adding incompatible things
legend = Legend.from_csv(text=csv_text)
with pytest.raises(LegendError):
_ = legend + rock
assert _
# Tolerance not allowed.
with pytest.raises(LegendError):
legend.get_component('#f7e9a7', tolerance=-1)
def test_well():
fname = 'tutorial/P-129_out.LAS'
well = Well(fname)
assert well.well.DATE.data == '10-Oct-2007'
assert well.data['GR'][0] == 46.69865036
legend = Legend.default()
f = 'tutorial/P-129_280_1935.png'
name, start, stop = f.strip('.png').split('_')
striplog = Striplog.from_img(f, float(start), float(stop), legend=legend, tolerance=35)
well.add_striplog(striplog, "striplog")
assert well.striplog.striplog.source == 'Image'
assert well.striplog.striplog.start == 280.0
assert len(well.striplogs_to_las3()) == 14841
def test_striplog_colour_plot():
"""
Tests mpl image of striplog with the ladder option.
"""
legend = Legend.builtin('NSDOE')
imgfile = "tutorial/M-MG-70_14.3_135.9.png"
striplog = Striplog.from_image(imgfile, 14.3, 135.9, legend=legend)
for iv in striplog:
iv.data['porosity'] = iv.top.z / 100
fig = striplog.plot(colour='porosity', aspect=3, return_fig=True)
return fig
def test_well():
fname = 'tutorial/P-129_out.LAS'
well = Well(fname)
assert well.well.DATE.data == '10-Oct-2007'
assert well.data['GR'][0] == 46.69865036
legend = Legend.default()
f = 'tutorial/P-129_280_1935.png'
name, start, stop = f.strip('.png').split('_')
striplog = Striplog.from_img(f,
float(start),
float(stop),
legend=legend,
tolerance=35)
well.add_striplog(striplog, "striplog")
assert well.striplog.striplog.source == 'Image'
assert well.striplog.striplog.start == 280.0
assert len(well.striplogs_to_las3()) == 14841
def test_from_image():
"""Test the generation of a striplog from an image.
"""
legend = Legend.builtin('NSDOE')
imgfile = "tutorial/M-MG-70_14.3_135.9.png"
striplog = Striplog.from_image(imgfile, 200, 300, legend=legend)
assert len(striplog) == 26
assert striplog[-1].primary.summary() == 'Volcanic'
assert np.floor(striplog.find('sandstone').cum) == 15
assert striplog.depth(260).primary.lithology == 'siltstone'
assert striplog.to_las3() is not ''
assert striplog.cum == 100.0
assert striplog.thickest().primary.lithology == 'anhydrite'
assert striplog.thickest(n=7)[1].primary.lithology == 'sandstone'
assert striplog.thinnest().primary.lithology == 'dolomite'
assert striplog.thinnest(n=7)[1].primary.lithology == 'siltstone'
# To and from log.
log, basis, table = striplog.to_log(step=0.1524, return_meta=True)
assert log[5] == 2.0
strip = Striplog.from_log(log, basis=basis, components=table)
assert len(strip) == len(striplog)
strip2 = Striplog.from_log(log, basis=basis, cutoff=3, legend=legend)
assert len(strip2) == 18
# Extract log onto striplog.
striplog.extract(log, basis=basis, name="Log", function=np.mean)
assert striplog[0].data['Log'] == 2.0
# Indexing.
indices = [2, 7, 20]
del striplog[indices]
assert len(striplog.find_gaps()) == len(indices)
# Prune and anneal.
striplog.prune(limit=1.0)
assert len(striplog) == 14
striplog.anneal()
assert not striplog.find_gaps() # Should be None
rock = striplog.find('sandstone')[1].components[0]
assert rock in striplog
def test_striplog_intersect():
"""Test intersection. This example is from the tutorial.
"""
chrono = Striplog([Interval(**{'top': 0,
'base': 60,
'components': [Component({'age': 'Holocene'})]
}),
Interval(**{'top': 60,
'base': 75,
'components': [Component({'age': 'Palaeogene'})]
}),
Interval(**{'top': 75,
'base': 100,
'components': [Component({'age': 'Cretaceous'})]
}),
])
legend = Legend.builtin('NSDOE')
imgfile = "tutorial/M-MG-70_14.3_135.9.png"
strip = Striplog.from_image(imgfile, 14.3, 135.9, legend=legend)
sands = strip.find('sandstone')
cretaceous = chrono.find('Palaeogene')
cret_sand = sands.intersect(cretaceous)
assert len(cret_sand) == 3
assert cret_sand.stop.z == 75
def plot(self,
legend=None,
fig_width=1.5,
aspect=10,
width_field=None,
depth_field=None,
wentworth='fine',
exxon_style=False,
yticks_right=False,
set_ylim=True,
xlim=None,
ax=None,
**kwargs):
"""
Plot as a ``Striplog`` of ``Bed``s.
Parameters
----------
legend: striplog.Legend, optional
If beds have primary component with 'lithology' field, will use ``defaults.litholegend``, otherwise random.
fig_width: int, optional
Width of figure, if creating one.
aspect: int, optional
Aspect ratio of figure, if creating one.
width_field: str or int
The ``Bed.data``` field or ``Bed.values`` column used to define polyon widths.
depth_field :
The ``Bed.data`` field or ``Bed.values`` column defining depths of ``width_field`` samples
wentworth: one of {'fine', 'coarse'}
Which Wentworth scale to use for xlabels/ticks.
exxon_style: bool, optional
Set to true to invert the x-axis (so GS increases to the left).
yticks_right: bool, optional
If True, will move yticks/labels to right side. Defualt=False.
set_ylim: bool, optional
Whether to set the y-limits of the ax to [self.start, self.stop]. Default=True.
**kwargs : optional
ylabelsize, yticksize, xlabelsize, xlabelrotation
"""
if legend is None:
# If beds have lithology, use litholegend
if hasattr(self[0].primary, 'lithology'):
legend = defaults.litholegend
# Fall back to random legend if not
else:
legend = Legend.random(self.components)
# Set up an ax if necessary
if ax is None:
return_ax = False
fig = plt.figure(figsize=(fig_width, aspect * fig_width))
ax = fig.add_axes([0.35, 0.05, 0.6, 0.95])
else:
return_ax = True
if set_ylim:
ax.set_ylim([self.start.z, self.stop.z])
#print('Set_ylim: ', [self.start.z, self.stop.z])
# Determine xlimits
if xlim is not None:
min_width, max_width = xlim
assert min_width < max_width, f'Is {xlim} a valid `xlim`?'
elif width_field:
# Set from the data if possible
min_width = floor(self.min_field(width_field) - 1)
max_width = ceil(self.max_field(width_field) + 1)
else:
# Fall back to component decors if not
min_width = min(d.width for d in legend) - 1
max_width = legend.max_width + 1
ax.set_xlim([min_width, max_width])
set_wentworth_ticks(ax, min_width, max_width, wentworth=wentworth)
# Plot the individual Beds as patches
for bed in self:
ax.add_patch(
bed.as_patch(legend, width_field, depth_field, min_width,
max_width, **kwargs))
# Finalize axis settings
ybase, ytop = ax.get_ylim()
if self.order is 'depth' and ytop > ybase:
ax.invert_yaxis()
if yticks_right:
ax.yaxis.set_label_position('right')
ax.yaxis.tick_right()
if exxon_style:
ax.invert_xaxis()
# Tick params settable with kwargs
ax.tick_params('y',
which='major',
labelsize=kwargs.get('ylabelsize', 16),
size=kwargs.get('yticksize', 16))
ax.tick_params('x',
which='minor',
labelsize=kwargs.get('xlabelsize', 12),
labelrotation=kwargs.get('xlabelrotation', 60))
if return_ax:
return ax
__author__ = 'kiruba' import numpy as np import matplotlib.pyplot as plt import pandas as pd import itertools from striplog import striplog, Legend, Lexicon legend = Legend.default() lexicon = Lexicon.default() csv_string = """ 200.000, 230.329, Anhydrite 230.329, 233.269, Grey vf-f sandstone 233.269, 234.700, Anhydrite 234.700, 236.596, Dolomite 236.596, 237.911, Red siltstone 237.911, 238.723, Anhydrite 238.723, 239.807, Grey vf-f sandstone 239.807, 240.774, Red siltstone 240.774, 241.122, Dolomite 241.122, 241.702, Grey siltstone 241.702, 243.095, Dolomite 243.095, 246.654, Grey vf-f sandstone 246.654, 247.234, Dolomite 247.234, 255.435, Grey vf-f sandstone 255.435, 258.723, Grey siltstone 258.723, 259.729, Dolomite 259.729, 260.967, Grey siltstone 260.967, 261.354, Dolomite 261.354, 267.041, Grey siltstone
gravel_decor = Decor({
'component': Component({'lithology': 'gravel'}),
'colour': '#ff9408', # 'xkcd:tangerine'
'hatch': 'o',
'width': 4
})
missing_decor = Decor({
'component': Component({'lithology': 'missing'}),
'colour': '#ffffff', # 'xkcd:white'
'hatch': 'x',
'width': -1
})
litholegend = Legend([mud_decor, sand_decor, gravel_decor, missing_decor])
###++++++++++++++++++++###
### Default csv fields ###
###++++++++++++++++++++###
DEFAULT_FIELDS = {'top': 'tops', 'base': 'bases'}
def gs2litho(gs, units='psi'):
"""
Map grainsize value `gs` to `striplog.Component`.
If `gs` is None or np.nan, maps to 'missing' Component.
If `units` is 'mm' or 'phi', will convert to 'psi' first.
# %%
# welly plot with gempy colors
# Create Decor list
dec_list = []
for e, i in enumerate(striplog_dict['alpha']):
dec_list.append(
Decor({
'_colour': geo_model.surfaces.df.loc[e, 'color'],
'width': None,
'component': i.primary,
'hatch': None
}))
# Create legend
legend = Legend(dec_list)
legend
# %%
# Plot striplogs:
f, a = plt.subplots(ncols=4, sharey=True)
for e, log in enumerate(striplog_dict.items()):
log[1].plot(ax=a[e], legend=legend)
f.tight_layout()
plt.show()
# %%
# Modifying the coordinates to make more sense
geo_model.surface_points.df[['X', 'Y'
]] = geo_model.surface_points.df[['X', 'Y']] * 10
print('\n LAS PATH:', path, '\n')
lasfiles = glob(path + '*.LAS')
for fname in lasfiles:
print(' '*5, fname)
print('\n')
# Get striplog files
path2 = 'data/Poseidon_data/tops/'
print('\n STRIP PATH:', path2, '\n')
stripfiles = glob(path2 + '*.csv')
for fname in stripfiles:
print(' '*5, fname)
print('\n')
tops_legend = Legend.from_csv(filename='data/Poseidon_data/tops_legend.csv')
p = Project.from_las('data/Poseidon_data/las/*.LAS')
well_uwi = [w.uwi for w in p] ##gets the well uwi data for use in the well-selector tool
# Add striplogs to Project
# Striplog must have the same name as LAS file.
# e.g. Torosa-1.LAS and Torosa-1.csv
for w in p:
name = Path(w.fname).name.split('.')[0]
new_path = f'data/Poseidon_data/tops/{name}.csv'
print(name, new_path)
strip = Striplog.from_csv(f'data/Poseidon_data/tops/{name}.csv')
w.data['tops'] = strip
return 'data:image/png;base64,{}'.format(encoded_image.decode())
app = Dash(__name__, external_stylesheets=[dbc.themes.BOOTSTRAP])
# Create server variable with Flask server object for use with gunicorn
server = app.server
# Get las files
path = 'data/Poseidon_data/las/' # direct link to specific data
lasfiles = glob(path + '*.LAS')
# Get striplog files
path2 = 'data/Poseidon_data/tops/' # direct link to specific data
stripfiles = glob(path2 + '*.csv')
legend = Legend.from_csv(filename='data/Poseidon_data/tops_legend.csv'
) # direct link to specific data
p = Project.from_las(
'data/Poseidon_data/las/*.LAS') # direct link to specific data
well_uwi = [w.uwi for w in p
] ##gets the well uwi data for use in the well-selector tool
# Add striplogs to Project
# Striplog must have the same name as LAS file.
# e.g. Torosa-1.LAS and Torosa-1.csv
for w in p:
name = Path(w.fname).stem
strip = Striplog.from_csv(
f'data/Poseidon_data/tops/{name}.csv') # direct link to specific data
w.data['tops'] = strip
def plot_feature_well(tc, gs):
"""
Plotting function for the feature well.
Args:
tc (TransectContainer): The container for the main plot.
log (axis): A matplotlib axis.
gs (GridSpec): A matplotlib gridspec.
"""
fname = tc.settings['curve_display']
logs = tc.log.get(tc.feature_well)
if not logs:
# There was no data for this well, so there won't be a feature plot.
Notice.fail("There's no well data for feature well " + tc.feature_well)
return gs
Z = logs.data['DEPT']
curves = ['GR', 'DT',
'DPHI_SAN',
'NPHI_SAN',
'DTS',
'RT_HRLT',
'RHOB',
'DRHO']
window = tc.settings.get('curve_smooth_window') or 51
ntracks = 5
lw = 1.0
smooth = True
naxes = 0
ncurv_per_track = np.zeros(ntracks)
if getattr(tc.log, 'striplog', None):
ncurv_per_track[0] = 1
for curve in curves:
naxes += 1
params = get_curve_params(curve, fname)
ncurv_per_track[params['track']] += 1
axss = plt.subplot(gs[2:, -5])
axs0 = [axss, axss.twiny()]
axs1 = [plt.subplot(gs[2:, -4])]
axs2 = [plt.subplot(gs[2:, -3])]
axs3 = [plt.subplot(gs[2:, -2])]
axs4 = [plt.subplot(gs[2:, -1])]
axs = [axs0, axs1, axs2, axs3, axs4]
if getattr(tc.log, 'striplog', None):
legend = Legend.default()
try:
logs.striplog[tc.log.striplog].plot_axis(axs0[0], legend=legend)
except KeyError:
# In fact, this striplog doesn't exist.
Notice.fail("There is no such striplog" + tc.log.striplog)
# And move on...
axs0[0].set_ylim([Z[-1], 0])
label_shift = np.zeros(len(axs))
for curve in curves:
try:
values = logs.data[curve]
except ValueError:
Notice.warning("Curve not present: "+curve)
values = np.empty_like(Z)
values[:] = np.nan
params = get_curve_params(curve, fname)
i = params['track']
j = 0
label_shift[i] += 1
linOrlog = params['logarithmic']
sxticks = np.array(params['xticks'])
xticks = np.array(sxticks, dtype=float)
whichticks = 'major'
if linOrlog == 'log':
midline = np.log(np.mean(xticks))
xpos = midline
whichticks = 'minor'
else:
midline = np.mean(xticks)
xpos = midline
if smooth:
values = utils.rolling_median(values, window)
if curve == 'GR':
j = 1 # second axis in first track
label_shift[i] = 1
if params['fill_left_cond']:
# do the fill for the lithology track
axs[i][j].fill_betweenx(Z, params['xleft'], values,
facecolor=params['fill_left'],
alpha=1.0, zorder=11)
if (curve == 'DPHI_SAN') and params['fill_left_cond']:
# do the fill for the neutron porosity track
try:
nphi = utils.rolling_median(logs.data['NPHI_SAN'], window)
except ValueError:
Notice.warning("No NPHI in this well")
nphi = np.empty_like(Z)
nphi[:] = np.nan
axs[i][j].fill_betweenx(Z,
nphi,
values,
where=nphi >= values,
facecolor=params['fill_left'],
alpha=1.0,
zorder=11)
axs[i][j].fill_betweenx(Z,
nphi,
values,
where=nphi <= values,
facecolor='#8C1717',
alpha=0.5,
zorder=12)
if curve == 'DRHO':
blk_drho = 3.2
values += blk_drho # this is a hack to get DRHO on RHOB scale
axs[i][j].fill_betweenx(Z,
blk_drho,
values,
where=nphi <= values,
facecolor='#CCCCCC',
alpha=0.5,
zorder=12)
# fill right
if params['fill_right_cond']:
axs[i][j].fill_betweenx(Z, values, params['xright'],
facecolor=params['fill_right'],
alpha=1.0, zorder=12)
# plot curve
axs[i][j].plot(values, Z, color=params['hexcolor'],
lw=lw, zorder=13)
# set scale of curve
axs[i][j].set_xlim([params['xleft'], params['xright']])
# ------------------------------------------------- #
# curve labels
# ------------------------------------------------- #
trans = transforms.blended_transform_factory(axs[i][j].transData,
axs[i][j].transData)
magic = -Z[-1] / 12.
axs[i][j].text(xpos, magic - (magic/4)*(label_shift[i]-1),
curve,
horizontalalignment='center',
verticalalignment='bottom',
fontsize=12, color=params['hexcolor'],
transform=trans)
# curve units
units = '${}$'.format(params['units'])
if label_shift[i] <= 1:
axs[i][j].text(xpos, magic*0.5,
units,
horizontalalignment='center',
verticalalignment='top',
fontsize=12, color='k',
transform=trans)
# ------------------------------------------------- #
# scales and tickmarks
# ------------------------------------------------- #
axs[i][j].set_xscale(linOrlog)
axs[i][j].set_ylim([Z[-1], 0])
axs[i][j].axes.xaxis.set_ticks(xticks)
axs[i][j].axes.xaxis.set_ticklabels(sxticks, fontsize=8)
for label in axs[i][j].axes.xaxis.get_ticklabels():
label.set_rotation(90)
axs[i][j].tick_params(axis='x', direction='out')
axs[i][j].xaxis.tick_top()
axs[i][j].xaxis.set_label_position('top')
axs[i][j].xaxis.grid(True, which=whichticks,
linewidth=0.25, linestyle='-',
color='0.75', zorder=100)
axs[i][j].yaxis.grid(True, which=whichticks,
linewidth=0.25, linestyle='-',
color='0.75', zorder=100)
axs[i][j].yaxis.set_ticks(np.arange(0, max(Z), 100))
if i != 0:
axs[i][j].set_yticklabels("")
# ------------------------------------------------- #
# End of curve loop
# ------------------------------------------------- #
# Add Depth label
axs[0][0].text(0, 1.05, 'MD\n$m$', fontsize='10',
horizontalalignment='center',
verticalalignment='center',
transform=axs[0][0].transAxes)
axs[0][0].axes.yaxis.get_ticklabels()
axs[0][0].axes.xaxis.set_ticklabels('')
for label in axs[0][0].axes.yaxis.get_ticklabels():
label.set_rotation(90)
label.set_fontsize(10)
for label in axs[1][0].axes.xaxis.get_ticklabels():
label.set_rotation(90)
label.set_fontsize(10)
# Add Tops
try:
if os.path.exists(tc.tops_file):
tops = utils.get_tops(tc.tops_file)
topx = get_curve_params('DT', fname)
topmidpt = np.amax((topx)['xright'])
# plot tops
for i in range(ntracks):
for mkr, depth in tops.iteritems():
# draw horizontal bars at the top position
axs[i][-1].axhline(y=depth,
xmin=0.01, xmax=.99,
color='b', lw=2,
alpha=0.5,
zorder=100)
# draw text box at the right edge of the last track
axs[-1][-1].text(x=topmidpt, y=depth, s=mkr,
alpha=0.5, color='k',
fontsize='8',
horizontalalignment='center',
verticalalignment='center',
zorder=10000,
bbox=dict(facecolor='white',
edgecolor='k',
alpha=0.25,
lw=0.25),
weight='light')
except AttributeError:
Notice.warning("No tops for this well")
except TypeError:
# We didn't get a tops file so move along.
print "No tops for this well"
return gs
def test_error():
legend = Legend.from_csv(csv_text)
rock = Component(r)
with pytest.raises(LegendError):
legend + rock
def plot_feature_well(tc, gs):
"""
Plotting function for the feature well.
Args:
tc (TransectContainer): The container for the main plot.
log (axis): A matplotlib axis.
gs (GridSpec): A matplotlib gridspec.
"""
fname = tc.settings['curve_display']
logs = tc.log.get(tc.feature_well)
if not logs:
# There was no data for this well, so there won't be a feature plot.
Notice.fail("There's no well data for feature well " + tc.feature_well)
return gs
Z = logs.data['DEPT']
curves = [
'GR', 'DT', 'DPHI_SAN', 'NPHI_SAN', 'DTS', 'RT_HRLT', 'RHOB', 'DRHO'
]
window = tc.settings.get('curve_smooth_window') or 51
ntracks = 5
lw = 1.0
smooth = True
naxes = 0
ncurv_per_track = np.zeros(ntracks)
if getattr(tc.log, 'striplog', None):
ncurv_per_track[0] = 1
for curve in curves:
naxes += 1
params = get_curve_params(curve, fname)
ncurv_per_track[params['track']] += 1
axss = plt.subplot(gs[2:, -5])
axs0 = [axss, axss.twiny()]
axs1 = [plt.subplot(gs[2:, -4])]
axs2 = [plt.subplot(gs[2:, -3])]
axs3 = [plt.subplot(gs[2:, -2])]
axs4 = [plt.subplot(gs[2:, -1])]
axs = [axs0, axs1, axs2, axs3, axs4]
if getattr(tc.log, 'striplog', None):
legend = Legend.default()
try:
logs.striplog[tc.log.striplog].plot_axis(axs0[0], legend=legend)
except KeyError:
# In fact, this striplog doesn't exist.
Notice.fail("There is no such striplog" + tc.log.striplog)
# And move on...
axs0[0].set_ylim([Z[-1], 0])
label_shift = np.zeros(len(axs))
for curve in curves:
try:
values = logs.data[curve]
except ValueError:
Notice.warning("Curve not present: " + curve)
values = np.empty_like(Z)
values[:] = np.nan
params = get_curve_params(curve, fname)
i = params['track']
j = 0
label_shift[i] += 1
linOrlog = params['logarithmic']
sxticks = np.array(params['xticks'])
xticks = np.array(sxticks, dtype=float)
whichticks = 'major'
if linOrlog == 'log':
midline = np.log(np.mean(xticks))
xpos = midline
whichticks = 'minor'
else:
midline = np.mean(xticks)
xpos = midline
if smooth:
values = utils.rolling_median(values, window)
if curve == 'GR':
j = 1 # second axis in first track
label_shift[i] = 1
if params['fill_left_cond']:
# do the fill for the lithology track
axs[i][j].fill_betweenx(Z,
params['xleft'],
values,
facecolor=params['fill_left'],
alpha=1.0,
zorder=11)
if (curve == 'DPHI_SAN') and params['fill_left_cond']:
# do the fill for the neutron porosity track
try:
nphi = utils.rolling_median(logs.data['NPHI_SAN'], window)
except ValueError:
Notice.warning("No NPHI in this well")
nphi = np.empty_like(Z)
nphi[:] = np.nan
axs[i][j].fill_betweenx(Z,
nphi,
values,
where=nphi >= values,
facecolor=params['fill_left'],
alpha=1.0,
zorder=11)
axs[i][j].fill_betweenx(Z,
nphi,
values,
where=nphi <= values,
facecolor='#8C1717',
alpha=0.5,
zorder=12)
if curve == 'DRHO':
blk_drho = 3.2
values += blk_drho # this is a hack to get DRHO on RHOB scale
axs[i][j].fill_betweenx(Z,
blk_drho,
values,
where=nphi <= values,
facecolor='#CCCCCC',
alpha=0.5,
zorder=12)
# fill right
if params['fill_right_cond']:
axs[i][j].fill_betweenx(Z,
values,
params['xright'],
facecolor=params['fill_right'],
alpha=1.0,
zorder=12)
# plot curve
axs[i][j].plot(values, Z, color=params['hexcolor'], lw=lw, zorder=13)
# set scale of curve
axs[i][j].set_xlim([params['xleft'], params['xright']])
# ------------------------------------------------- #
# curve labels
# ------------------------------------------------- #
trans = transforms.blended_transform_factory(axs[i][j].transData,
axs[i][j].transData)
magic = -Z[-1] / 12.
axs[i][j].text(xpos,
magic - (magic / 4) * (label_shift[i] - 1),
curve,
horizontalalignment='center',
verticalalignment='bottom',
fontsize=12,
color=params['hexcolor'],
transform=trans)
# curve units
units = '${}$'.format(params['units'])
if label_shift[i] <= 1:
axs[i][j].text(xpos,
magic * 0.5,
units,
horizontalalignment='center',
verticalalignment='top',
fontsize=12,
color='k',
transform=trans)
# ------------------------------------------------- #
# scales and tickmarks
# ------------------------------------------------- #
axs[i][j].set_xscale(linOrlog)
axs[i][j].set_ylim([Z[-1], 0])
axs[i][j].axes.xaxis.set_ticks(xticks)
axs[i][j].axes.xaxis.set_ticklabels(sxticks, fontsize=8)
for label in axs[i][j].axes.xaxis.get_ticklabels():
label.set_rotation(90)
axs[i][j].tick_params(axis='x', direction='out')
axs[i][j].xaxis.tick_top()
axs[i][j].xaxis.set_label_position('top')
axs[i][j].xaxis.grid(True,
which=whichticks,
linewidth=0.25,
linestyle='-',
color='0.75',
zorder=100)
axs[i][j].yaxis.grid(True,
which=whichticks,
linewidth=0.25,
linestyle='-',
color='0.75',
zorder=100)
axs[i][j].yaxis.set_ticks(np.arange(0, max(Z), 100))
if i != 0:
axs[i][j].set_yticklabels("")
# ------------------------------------------------- #
# End of curve loop
# ------------------------------------------------- #
# Add Depth label
axs[0][0].text(0,
1.05,
'MD\n$m$',
fontsize='10',
horizontalalignment='center',
verticalalignment='center',
transform=axs[0][0].transAxes)
axs[0][0].axes.yaxis.get_ticklabels()
axs[0][0].axes.xaxis.set_ticklabels('')
for label in axs[0][0].axes.yaxis.get_ticklabels():
label.set_rotation(90)
label.set_fontsize(10)
for label in axs[1][0].axes.xaxis.get_ticklabels():
label.set_rotation(90)
label.set_fontsize(10)
# Add Tops
try:
if os.path.exists(tc.tops_file):
tops = utils.get_tops(tc.tops_file)
topx = get_curve_params('DT', fname)
topmidpt = np.amax((topx)['xright'])
# plot tops
for i in range(ntracks):
for mkr, depth in tops.iteritems():
# draw horizontal bars at the top position
axs[i][-1].axhline(y=depth,
xmin=0.01,
xmax=.99,
color='b',
lw=2,
alpha=0.5,
zorder=100)
# draw text box at the right edge of the last track
axs[-1][-1].text(x=topmidpt,
y=depth,
s=mkr,
alpha=0.5,
color='k',
fontsize='8',
horizontalalignment='center',
verticalalignment='center',
zorder=10000,
bbox=dict(facecolor='white',
edgecolor='k',
alpha=0.25,
lw=0.25),
weight='light')
except AttributeError:
Notice.warning("No tops for this well")
except TypeError:
# We didn't get a tops file so move along.
print "No tops for this well"
return gs
__author__ = 'kiruba' import numpy as np import matplotlib.pyplot as plt import pandas as pd import itertools from striplog import striplog, Legend, Lexicon legend = Legend.default() lexicon = Lexicon.default() csv_string = """ 200.000, 230.329, Anhydrite 230.329, 233.269, Grey vf-f sandstone 233.269, 234.700, Anhydrite 234.700, 236.596, Dolomite 236.596, 237.911, Red siltstone 237.911, 238.723, Anhydrite 238.723, 239.807, Grey vf-f sandstone 239.807, 240.774, Red siltstone 240.774, 241.122, Dolomite 241.122, 241.702, Grey siltstone 241.702, 243.095, Dolomite 243.095, 246.654, Grey vf-f sandstone 246.654, 247.234, Dolomite 247.234, 255.435, Grey vf-f sandstone 255.435, 258.723, Grey siltstone 258.723, 259.729, Dolomite 259.729, 260.967, Grey siltstone 260.967, 261.354, Dolomite 261.354, 267.041, Grey siltstone 267.041, 267.350, Dolomite 267.350, 274.004, Grey siltstone
