def transmit(transfer):
TX = 25
BPS = 2000
pi = pigpio.pi()
tx = vw.tx(pi, TX, BPS)
start = time.time()
print transfer
while not tx.ready():
time.sleep(0.1)
tx.put(transfer)
time.sleep(0.2)
tx.put(transfer)
tx.cancel()
pi.stop()
import vw
CONFIG = ml.read_config()
NAME = 'codesend'
LOGFILE = 'debug'
LOGGER = ml.init_logging(NAME, LOGFILE)
try:
TX = int(CONFIG.get("vw", "TX_Code"))
BPS = int(CONFIG.get("vw", "BPS"))
PI = pigpio.pi() # Connect to local Pi.
TX = vw.tx(PI, TX, BPS) # Specify Pi, TX GPIO, and baud.
CONFIG = ' TX:' + str(TX) + ' BPS:' + str(BPS)
LOGGER.warning('codesend has started with CONFIG. >> ' + CONFIG)
while TX.ready():
# TX.put("{:s}".format(sys.argv[1]))
R_VALUE = "{:s}".format(sys.argv[1])
R_VALUE_LEN = len(R_VALUE)
# print(R_VALUE)
LOGGER.debug('R_VALUE : ' + R_VALUE + ' length : ' + str(R_VALUE_LEN))
#!/usr/bin/env python
# -*- coding: latin-1 -*-
import time
import pigpio
import vw
BPS = 2000
pi = pigpio.pi()
tx = vw.tx(pi, 25, BPS)
compteur = 0
start = time.time()
while (time.time() - start) < 2:
compteur += 2
while not tx.ready():
time.sleep(0.1)
time.sleep(0.2)
while not tx.ready():
time.sleep(0.1)
time.sleep(0.2)
tx.put("0")
exit()
tx.cancel()
pi.stop()
import time
import pigpio
import vw
RX=11
TX=25
BPS=2000
pi = pigpio.pi() # Connect to local Pi.
rx = vw.rx(pi, RX, BPS) # Specify Pi, rx gpio, and baud.
tx = vw.tx(pi, TX, BPS) # Specify Pi, tx gpio, and baud.
msg = 0
start = time.time()
while (time.time()-start) < 300:
msg += 1
while not tx.ready():
time.sleep(0.1)
time.sleep(0.2)
tx.put([48, 49, 65, ((msg>>6)&0x3F)+32, (msg&0x3F)+32])
if __name__ == "__main__":
import time
import pigpio
import vw
RX=20
TX=25
BPS=2000
pi = pigpio.pi() # Connect to local Pi.
rx = vw.rx(pi, RX, BPS) # Specify Pi, rx GPIO, and baud.
tx = vw.tx(pi, TX, BPS) # Specify Pi, tx GPIO, and baud.
msg = 0
start = time.time()
while (time.time()-start) < 300:
msg += 1
#while not tx.ready():
# time.sleep(0.02)
#time.sleep(0.1)
#tx.put("{:04d}".format(msg))
def __init__(self):
self.ledcom_pi = pigpio.pi()
self.ledcom_tx = vw.tx(self.ledcom_pi, LED_COM_TX, LED_COM_BPS)
def __init__(self):
self.ledcom_pi = pigpio.pi()
self.ledcom_tx = vw.tx(self.ledcom_pi, LED_COM_TX, LED_COM_BPS)
def sendToPuck(number_str):
"Envoie un message au palet numero 'number_str'"
for x in range(0,5):
while not tx.ready():
time.sleep(0.1)
time.sleep(0.1)
tx.put("SB"+number_str+"F")
print "\t\tTerminé !"
"""
Initialisation des variables
"""
TX = 25 # pin GPIO data emetteur RF
BPS = 1000 # vitesse en bauds
pi = pigpio.pi()
tx = vw.tx(pi, TX, BPS)
#pins pour le clavier numerique
cols = [4, 3, 2] #pins colones
rows = [10, 22, 27, 17] # pins lignes
current_value = ""
for col in cols:
pi.set_mode(col, pigpio.INPUT)
pi.set_pull_up_down(col, pigpio.PUD_UP)
pi.set_glitch_filter(col, 2500)
for row in rows:
pi.set_mode(row, pigpio.OUTPUT)
pi.write(row, 0)
import time
import pigpio
import vw
RX=20
TX=1
BPS=20000
pi = pigpio.pi() # Connect to local Pi.
#rx = vw.rx(pi, RX, BPS) # Specify Pi, rx GPIO, and baud.
tx = vw.tx(pi, TX, BPS) # Specify Pi, tx GPIO, and baud.
msg = 0
start = time.time()
while (time.time()-start) < 300:
msg += 1
while not tx.ready():
time.sleep(0.02)
time.sleep(0.1)
tx.put("{:04d}".format(msg))
while not tx.ready():
time.sleep(0.02)
time.sleep(0.1)
tx.put("Hello World #{:04d}!".format(msg))
import time
import pigpio
import vw
RX = 11
TX = 25
BPS = 2000
pi = pigpio.pi() # Connect to local Pi.
rx = vw.rx(pi, RX, BPS) # Specify Pi, rx gpio, and baud.
tx = vw.tx(pi, TX, BPS) # Specify Pi, tx gpio, and baud.
msg = 0
start = time.time()
while (time.time() - start) < 300:
msg += 1
while not tx.ready():
time.sleep(0.1)
time.sleep(0.2)
tx.put([48, 49, 65, ((msg >> 6) & 0x3F) + 32, (msg & 0x3F) + 32])