def add_plsi(self, mrid: str = "default-plsi", wiring_supplier=None, **kwargs):
try:
plsi = self.network[mrid]
except KeyError:
mrid = _get_mrid(mrid)
plsi = PerLengthSequenceImpedance(mrid=mrid, **kwargs)
self.network.add(plsi)
return plsi
def test_resolves_acls_plsi():
ns = NetworkService()
plsi = PerLengthSequenceImpedance()
acls = AcLineSegment(per_length_sequence_impedance=plsi)
br = resolver.per_length_sequence_impedance(acls)
ns.resolve_or_defer_reference(br, plsi.mrid)
assert plsi.mrid in ns.get_unresolved_reference_mrids(br)
ns.add(acls)
acls_fetched = ns.get(acls.mrid)
assert acls_fetched.per_length_sequence_impedance == plsi
ns = NetworkService()
ns.add(plsi)
ns.resolve_or_defer_reference(resolver.per_length_sequence_impedance(acls), plsi.mrid)
assert len(list(ns.get_unresolved_reference_mrids(br))) == 0
ns.add(acls)
acls_fetched = ns.get(acls.mrid)
assert acls_fetched.per_length_sequence_impedance == plsi
def create_acls_for_connecting(network: NetworkService, mrid: str = "", phases: PhaseCode = PhaseCode.ABCN, length: float = 0.0,
plsi_mrid: str = "perLengthSequenceImepedance",
wi_mrid: str = "wireInfo") -> AcLineSegment:
if not mrid:
mrid = CopyableUUID()
try:
plsi = network.get(plsi_mrid, PerLengthSequenceImpedance)
except KeyError:
plsi = PerLengthSequenceImpedance(plsi_mrid)
network.add(plsi)
try:
wi = network.get(wi_mrid, WireInfo)
except:
wi = WireInfo(wi_mrid)
network.add(wi)
acls = AcLineSegment(mrid, name=f"{mrid} name", per_length_sequence_impedance=plsi, asset_info=wi, length=length)
create_terminals(network, acls, 2, phases)
network.add(acls)
return acls
def create_lines(network, bv_416v, connectivity_node_mrid, plsi_1):
"""
Create lines (in depth-first order, starting from top). Note re-use of PerLengthSequenceImpedances.
"""
# ACLS2
acls2_loc = Location(mrid="acls2-loc")
acls2_loc.add_point(PositionPoint(152.9146196,-31.44311082))
acls2_loc.add_point(PositionPoint(152.9144265,-31.43913816))
network.add(acls2_loc)
plsi_2 = PerLengthSequenceImpedance(mrid="2c_16", r=1150, x=88.0, r0=1200, x0=88.0)
network.add(plsi_2)
acls2 = AcLineSegment(mrid="acls2", name="acls2",
base_voltage=bv_416v,
length=6.75,
per_length_sequence_impedance=plsi_2,
location=acls2_loc)
acls2_t1 = Terminal(mrid='acls2-t1', phases=PhaseCode.ABCN, conducting_equipment=acls2)
network.connect_by_mrid(acls2_t1, connectivity_node_mrid)
acls2.add_terminal(acls2_t1)
network.add(acls2_t1)
acls2_t2 = Terminal(mrid='acls2-t2', phases=PhaseCode.ABCN, conducting_equipment=acls2)
network.connect_by_mrid(acls2_t2, 'Bus 27')
acls2.add_terminal(acls2_t2)
network.add(acls2_t2)
network.add(acls2)
# ACLS3
acls3_loc = Location(mrid="acls3-loc")
acls3_loc.add_point(PositionPoint(152.9172589,-31.44307421))
acls3_loc.add_point(PositionPoint(152.9146196,-31.44311082))
network.add(acls3_loc)
acls3 = AcLineSegment(mrid="acls3",name="acls3",
base_voltage=bv_416v,
length=5.3248,
per_length_sequence_impedance=plsi_2,
location=acls3_loc)
acls3_t1 = Terminal(mrid='acls3-t1', phases=PhaseCode.ABCN, conducting_equipment=acls3)
network.connect_by_mrid(acls3_t1, 'Bus 27')
acls3.add_terminal(acls3_t1)
network.add(acls3_t1)
acls3_t2 = Terminal(mrid='acls3-t2', phases=PhaseCode.ABCN, conducting_equipment=acls3)
network.connect_by_mrid(acls3_t2, 'Bus 34')
acls3.add_terminal(acls3_t2)
network.add(acls3_t2)
network.add(acls3)
# ACLS4
acls4_loc = Location(mrid="acls4-loc")
acls4_loc.add_point(PositionPoint(152.9121734,-31.44320236))
acls4_loc.add_point(PositionPoint(152.9146196,-31.44311082))
network.add(acls4_loc)
acls4 = AcLineSegment(mrid="acls4", name="acls4",
base_voltage=bv_416v,
length=75.6,
per_length_sequence_impedance=plsi_2,
location=acls4_loc)
acls4_t1 = Terminal(mrid='acls4-t1', phases=PhaseCode.ABCN, conducting_equipment=acls4)
network.connect_by_mrid(acls4_t1, 'Bus 27')
acls4.add_terminal(acls4_t1)
network.add(acls4_t1)
acls4_t2 = Terminal(mrid='acls4-t2', phases=PhaseCode.ABCN, conducting_equipment=acls4)
network.connect_by_mrid(acls4_t2, 'Bus 70')
acls4.add_terminal(acls4_t2)
network.add(acls4_t2)
network.add(acls4)
# ACLS5
acls5_loc = Location(mrid="acls5-loc")
acls5_loc.add_point(PositionPoint(152.9142977,-31.43719754))
acls5_loc.add_point(PositionPoint(152.9144265,-31.43913816))
network.add(acls5_loc)
acls5 = AcLineSegment(mrid="acls5", name="acls5",
base_voltage=bv_416v,
length=25.5,
per_length_sequence_impedance=plsi_1,
location=acls5_loc)
acls5_t1 = Terminal(mrid='acls5-t1', phases=PhaseCode.ABCN, conducting_equipment=acls5)
network.connect_by_mrid(acls5_t1, connectivity_node_mrid)
acls5.add_terminal(acls5_t1)
network.add(acls5_t1)
acls5_t2 = Terminal(mrid='acls5-t2', phases=PhaseCode.ABCN, conducting_equipment=acls5)
network.connect_by_mrid(acls5_t2, 'Bus 32')
acls5.add_terminal(acls5_t2)
network.add(acls5_t2)
network.add(acls5)
# ACLS6
acls6_loc = Location(mrid="acls6-loc")
acls6_loc.add_point(PositionPoint(152.9152419,-31.43712431))
acls6_loc.add_point(PositionPoint(152.9142977,-31.43719754))
network.add(acls6_loc)
acls6 = AcLineSegment(mrid="acls6",name="acls6",
base_voltage=bv_416v,
length=5.7,
per_length_sequence_impedance=plsi_2,
location=acls6_loc)
acls6_t1 = Terminal(mrid='acls6-t1', phases=PhaseCode.ABCN, conducting_equipment=acls6)
network.connect_by_mrid(acls6_t1, 'Bus 32')
acls6.add_terminal(acls6_t1)
network.add(acls6_t1)
acls6_t2 = Terminal(mrid='acls6-t2', phases=PhaseCode.ABCN, conducting_equipment=acls6)
network.connect_by_mrid(acls6_t2, 'Bus 36')
acls6.add_terminal(acls6_t2)
network.add(acls6_t2)
network.add(acls6)
# ACLS7
acls7_loc = Location(mrid="acls7-loc")
acls7_loc.add_point(PositionPoint(152.9151775,-31.43624552))
acls7_loc.add_point(PositionPoint(152.9152419,-31.43712431))
network.add(acls7_loc)
acls7 = AcLineSegment(mrid="acls7",name="acls7",
base_voltage=bv_416v,
length=12.65,
per_length_sequence_impedance=plsi_2,
location=acls7_loc)
acls7_t1 = Terminal(mrid='acls7-t1', phases=PhaseCode.ABCN, conducting_equipment=acls7)
network.connect_by_mrid(acls7_t1, 'Bus 36')
acls7.add_terminal(acls7_t1)
network.add(acls7_t1)
acls7_t2 = Terminal(mrid='acls7-t2', phases=PhaseCode.ABCN, conducting_equipment=acls7)
network.connect_by_mrid(acls7_t2, 'Bus 47')
acls7.add_terminal(acls7_t2)
network.add(acls7_t2)
network.add(acls7)
def create_feeder():
"""
Creates a small feeder based on https://bitbucket.org/zepben/cimdemo/src/master/lv_simple_net.png.
:return: A NetworkService representing the feeder.
"""
# Create the network. This will be used for sending all components of the feeder.
network = NetworkService()
# A network has multiple BaseVoltage's, each used to represent the intended nominal voltage of equipment operating
# on a segment of the network.
bv_11kv = BaseVoltage(mrid='11kv', nominal_voltage=11000, name='11kV')
# We must add the BaseVoltage to the network directly if any ConductingEquipment relies on it.
network.add(bv_11kv)
# There is no required order for adding equipment to the network, as long as its dependencies are satisfied.
# In this example, we will start with the main EnergySource, working towards the leaf nodes in the network
# in a depth-first traversal.
# Geographic coordinates and location details are stored as a Location against any type extending
# PowerSystemResource.
energy_source_loc = Location(mrid='es-loc')
energy_source_loc.add_point(PositionPoint(152.9100276,-31.43952262))
network.add(energy_source_loc)
# Create the EnergySource, specifying any desired parameters plus passing in our BaseVoltage, EnergySourcePhase's,
# Location, and Terminals. Note that terminals accepts a list of Terminals, however an EnergySource only has one.
energy_source = EnergySource(mrid='EnergySource',
name='Source',
base_voltage=bv_11kv,
voltage_magnitude=11000,
voltage_angle=0.0,
location=energy_source_loc)
# Note that all types extending IdentifiedObject take an mrid. If it is not provided, a UUID will be generated
# for you. We create a Terminal specifying its phase and connectivity_node. The ConnectivityNode will also
# receive a reference to the Terminal as part of the constructor.
es_t1 = Terminal(mrid='es-t1', phases=PhaseCode.ABC, conducting_equipment=energy_source)
# This is the starting ConnectivityNode in our network
# At a bare minimum, at least one connectivity node and one Terminal is required for an EnergySource to be
# connected to the network. Note however that the network will allow you to add disconnected equipment if that
# suits your use case.
# NetworkService.connect_by_mrid is a helper method that will create a ConnectivityNode in the NetworkService for
# the given mRID (in this case, SourceNode), and connect the passed in Terminal to it (es_t1).
# You should ensure you always call connect_by_mrid or connect_by_terminal, as this keeps the references between
# the ConnectivityNode and Terminal in sync.
network.connect_by_mrid(es_t1, "SourceNode")
# Any ConductingEquipment must have its terminals added to it before being utilised. This can be performed through
# the constructor via the terminals_ parameter, or added after initialisation like below. The Terminal must also
# have its conducting_equipment specified for add_terminal() to succeed.
energy_source.add_terminal(es_t1)
network.add(es_t1)
# An EnergySource has an EnergySourcePhase representing each phase it supplies. This is primarily used for tracing,
# however more attributes will be added at a later date.
es_phases = [EnergySourcePhase(mrid="esp1", energy_source=energy_source, phase=SinglePhaseKind.A),
EnergySourcePhase(mrid="esp2", energy_source=energy_source, phase=SinglePhaseKind.B),
EnergySourcePhase(mrid="esp3", energy_source=energy_source, phase=SinglePhaseKind.C)]
for phase in es_phases:
energy_source.add_phase(phase)
network.add(phase)
network.add(energy_source)
# Create the PowerTransformer
# Note BaseVoltage is not used for the PowerTransformer as it has two separate voltages. rated_u must be populated
# on both ends.
power_transformer = PowerTransformer(mrid="PowerTransformer", vector_group=VectorGroup.DYN11)
delta_pt_end = PowerTransformerEnd(mrid="delta-pt-end", rated_s=800000, rated_u=11000, connection_kind=WindingConnection.D, power_transformer=power_transformer)
delta_tap_changer = RatioTapChanger(mrid="rtc1", high_step=4, low_step=1, step=2.0, neutral_step=2, normal_step=2, step_voltage_increment=0.25, transformer_end=delta_pt_end)
delta_pt_end.ratio_tap_changer = delta_tap_changer
network.add(delta_tap_changer)
network.add(delta_pt_end)
wye_pt_end = PowerTransformerEnd(mrid="wye-pt-end", rated_s=800000, rated_u=416, connection_kind=WindingConnection.Yn, power_transformer=power_transformer)
wye_tap_changer = RatioTapChanger(mrid="rtc2", high_step=2, low_step=1, step=2.0, neutral_step=2, normal_step=2, step_voltage_increment=0.5, transformer_end=wye_pt_end)
wye_pt_end.ratio_tap_changer = wye_tap_changer
network.add(wye_tap_changer)
network.add(wye_pt_end)
# Terminals are required on the PowerTransformer, corresponding to each PowerTransformerEnd
# Note that ordering of the Terminals is significant, and must correspond with the ordering of the ends.
delta_terminal = Terminal(mrid='pt-t1', phases=PhaseCode.ABC, conducting_equipment=power_transformer)
# Connect the terminal to the source ConnectivityNode
network.connect_by_mrid(delta_terminal, 'SourceNode')
power_transformer.add_terminal(delta_terminal)
network.add(delta_terminal)
# Set the terminal on the Delta PowerTransformerEnd (This allows us to correlate the Terminal with the voltage)
delta_pt_end.terminal = delta_terminal
# The wye Terminal is connected to the Bus 0 ConnectivityNode
wye_terminal = Terminal(mrid='pt-t2', phases=PhaseCode.ABCN, conducting_equipment=power_transformer)
# Connect the terminal to the ConnectivityNode
network.connect_by_mrid(wye_terminal, 'Bus 0')
power_transformer.add_terminal(wye_terminal)
network.add(wye_terminal)
# Set the terminal on the WYE PowerTransformerEnd (This allows us to correlate the Terminal with the voltage)
wye_pt_end.terminal = wye_terminal
# Location
pt_loc = Location(mrid='pt-loc')
pt_loc.add_point(PositionPoint(152.9100276,-31.43952262))
power_transformer.location = pt_loc
network.add(pt_loc)
# Add the ends to the network
power_transformer.add_end(delta_pt_end)
power_transformer.add_end(wye_pt_end)
# Add the PowerTransformer to the network
network.add(power_transformer)
# Create the Breaker. It requires a new BaseVoltage of 416V
# Note Breaker constructor defaults all switch states to CLOSED.
bv_416v = BaseVoltage(mrid="416v", nominal_voltage=416, name="0.416kV")
network.add(bv_416v)
# Create a location for the Breaker
breaker_loc = Location(mrid='breaker-loc')
breaker_loc.add_point(PositionPoint(152.9100276,-31.43952262))
network.add(breaker_loc)
breaker = Breaker(mrid="Breaker", base_voltage=bv_416v, location=breaker_loc)
t1 = Terminal(mrid='br-t1', phases=PhaseCode.ABCN, conducting_equipment=breaker)
network.connect_by_mrid(t1, 'Bus 0')
breaker.add_terminal(t1)
network.add(t1)
t2 = Terminal(mrid='br-t2', phases=PhaseCode.ABCN, conducting_equipment=breaker)
network.connect_by_mrid(t2, 'Bus 1')
breaker.add_terminal(t2)
network.add(t2)
# Add the Breaker to the network
network.add(breaker)
# Create first AcLineSegment with a PerLengthSequenceImpedance and Location with two position_points
# The properties of the conductor are contained in a PerLengthSequenceImpedance. All amounts are per metre.
plsi_1 = PerLengthSequenceImpedance(mrid="4c_70", r=466.0, x=71.0, r0=1505.0, x0=83.0)
network.add(plsi_1)
# A line typically has two longlats representing each terminal point. Note these must be added in order and
# correspond to the matching Terminal.
acls1_loc = Location(mrid="acls1-loc")
acls1_loc.add_point(PositionPoint(152.9144265,-31.43913816))
acls1_loc.add_point(PositionPoint(152.910199,-31.439523))
network.add(acls1_loc)
acls1 = AcLineSegment(mrid="acls1",name="acls1",
base_voltage=bv_416v,
length=31.71938,
per_length_sequence_impedance=plsi_1,
location=acls1_loc)
# Create and add the Terminal's for this ACLS
acls1_t1 = Terminal(mrid='acls1-t1', phases=PhaseCode.ABCN, conducting_equipment=acls1)
network.connect_by_mrid(acls1_t1, "Bus 1")
acls1.add_terminal(acls1_t1)
network.add(acls1_t1)
acls1_t2 = Terminal(mrid='acls1-t2', phases=PhaseCode.ABCN, conducting_equipment=acls1)
network.connect_by_mrid(acls1_t2, "Bus 25")
acls1.add_terminal(acls1_t2)
network.add(acls1_t2)
# Add the ACLS to the network after adding all its dependencies
network.add(acls1)
# Create the rest of the lines. These are all quite similar to above.
create_lines(network, bv_416v, "Bus 25", plsi_1)
# Create first EnergyConsumer on 230V with a single phase
bv_230v = BaseVoltage(mrid="230v", nominal_voltage=230, name="0.23kV")
network.add(bv_230v)
# Each EnergyConsumer has a list of phases it is connected on. These are optional and only used to
# specify additional properties per phase when they are known.
ecp = [EnergyConsumerPhase(mrid='ecp1', phase=SinglePhaseKind.A, p_fixed=800.0, q_fixed=200.0)]
network.add(ecp[0])
# Creaote the EnergyConsumer's Location
ec1_loc = Location(mrid="ec1-loc")
ec1_loc.add_point(PositionPoint(152.9172589,-31.44307421))
network.add(ec1_loc)
energy_consumer1 = EnergyConsumer(mrid="EnergyConsumer1",
p=1000,
q=334.27413609633844,
name="Load 1",
phase_connection=PhaseShuntConnectionKind.Y,
energy_consumer_phases=ecp,
base_voltage=bv_230v,
location=ec1_loc)
# Create and add the Terminal, Note that the ConnectivityNode will be retrieved from the network (Bus 34 was created in create_lines())
ec1_t1 = Terminal(mrid='ec1-t1', phases=PhaseCode.A, conducting_equipment=energy_consumer1)
network.connect_by_mrid(ec1_t1, "Bus 34")
energy_consumer1.add_terminal(ec1_t1)
network.add(ec1_t1)
# Add the energy consumer to the network
network.add(energy_consumer1)
# Create PV EnergySource with a single phase and a location
esp = [EnergySourcePhase(mrid='esp4', phase=SinglePhaseKind.A)]
network.add(esp[0])
es2_loc = Location(mrid="es2-loc")
es2_loc.add_point(PositionPoint(152.9172589,-31.44307421))
network.add(es2_loc)
energy_source_pv = EnergySource(mrid="PV-DG",
name='PV Distributed Generator',
base_voltage=bv_230v,
voltage_magnitude=416,
voltage_angle=9.0,
energy_source_phases=esp,
location=es2_loc)
es2_t1 = Terminal(mrid='es2-t1', phases=PhaseCode.A, conducting_equipment=energy_source_pv)
network.connect_by_mrid(es2_t1, "Bus 34")
energy_source_pv.add_terminal(es2_t1)
network.add(es2_t1)
# Add the EnergySource to the network.
network.add(energy_source_pv)
# Create second EnergyConsumer with a single phase of B and a Location.
ecp = [EnergyConsumerPhase(mrid="ecp2", phase=SinglePhaseKind.B, p_fixed=800.0, q_fixed=200.0)]
network.add(ecp[0])
ec2_loc = Location(mrid="ec2-loc")
ec2_loc.add_point(PositionPoint(152.9121734,-31.44320236))
network.add(ec2_loc)
energy_consumer2 = EnergyConsumer(mrid="EnergyConsumer2",
p=1000,
q=334.27413609633844,
name="Load 2",
phase_connection=PhaseShuntConnectionKind.Y,
energy_consumer_phases=ecp,
base_voltage=bv_230v,
location=ec2_loc)
# Create and connect the Terminal.
ec2_t1 = Terminal(mrid='ec2-t1', phases=PhaseCode.B, conducting_equipment=energy_consumer2)
network.connect_by_mrid(ec2_t1, "Bus 47")
energy_consumer2.add_terminal(ec2_t1)
network.add(ec2_t1)
# Add the EnergyConsumer to the network
network.add(energy_consumer2)
# Create third EnergyConsumer with a single phase A and a Location.
ecp = [EnergyConsumerPhase(mrid="ecp3", phase=SinglePhaseKind.A, p_fixed=800.0, q_fixed=200.0)]
network.add(ecp[0])
ec3_loc = Location(mrid="ec3-loc", position_points=[PositionPoint(152.9151775,-31.43624552)])
network.add(ec3_loc)
energy_consumer3 = EnergyConsumer(mrid="EnergyConsumer3",
p=1000,
q=334.27413609633844,
name="Load 3",
phase_connection=PhaseShuntConnectionKind.Y,
energy_consumer_phases=ecp,
base_voltage=bv_230v,
location=ec3_loc)
ec3_t1 = Terminal(mrid='ec3-t1', phases=PhaseCode.A, conducting_equipment=energy_consumer3)
network.connect_by_mrid(ec3_t1, "Bus 70")
energy_consumer3.add_terminal(ec3_t1)
network.add(ec3_t1)
# Add the last energy consumer to the network
network.add(energy_consumer3)
# Our network is complete and connected. Next we must send it.
return network
def __post_init__(self):
self.acls = AcLineSegment()
self.plsi = PerLengthSequenceImpedance()
self.acls.per_length_sequence_impedance = self.plsi
def create_lines(network, bv_416v, connectivity_node_mrid, plsi_1):
"""
Create lines (in depth-first order, starting from top). Note re-use of PerLengthSequenceImpedances.
"""
# ACLS2
acls2_loc = Location(mrid="acls2-loc")
acls2_loc.add_point(PositionPoint(149.11003377113082, -35.27061681962318))
acls2_loc.add_point(PositionPoint(149.11010887298323, -35.2700474576177))
network.add(acls2_loc)
plsi_2 = PerLengthSequenceImpedance(mrid="2c_16",
r=1150,
x=88.0,
r0=1200,
x0=88.0)
network.add(plsi_2)
acls2 = AcLineSegment(mrid="acls2",
base_voltage=bv_416v,
length=6.75,
per_length_sequence_impedance=plsi_2,
location=acls2_loc)
acls2_t1 = Terminal(mrid='acls2-t1',
phases=PhaseCode.ABCN,
conducting_equipment=acls2)
network.connect_by_mrid(acls2_t1, connectivity_node_mrid)
acls2.add_terminal(acls2_t1)
network.add(acls2_t1)
acls2_t2 = Terminal(mrid='acls2-t2',
phases=PhaseCode.ABCN,
conducting_equipment=acls2)
network.connect_by_mrid(acls2_t2, 'Bus 27')
acls2.add_terminal(acls2_t2)
network.add(acls2_t2)
network.add(acls2)
# ACLS3
acls3_loc = Location(mrid="acls3-loc")
acls3_loc.add_point(PositionPoint(149.11010887298323, -35.2700474576177))
acls3_loc.add_point(PositionPoint(149.11038782272078, -35.269889787431744))
network.add(acls3_loc)
acls3 = AcLineSegment(mrid="acls3",
base_voltage=bv_416v,
length=5.3248,
per_length_sequence_impedance=plsi_2,
location=acls3_loc)
acls3_t1 = Terminal(mrid='acls3-t1',
phases=PhaseCode.ABCN,
conducting_equipment=acls3)
network.connect_by_mrid(acls3_t1, 'Bus 27')
acls3.add_terminal(acls3_t1)
network.add(acls3_t1)
acls3_t2 = Terminal(mrid='acls3-t2',
phases=PhaseCode.ABCN,
conducting_equipment=acls3)
network.connect_by_mrid(acls3_t2, 'Bus 34')
acls3.add_terminal(acls3_t2)
network.add(acls3_t2)
network.add(acls3)
# ACLS4
acls4_loc = Location(mrid="acls4-loc")
acls4_loc.add_point(PositionPoint(149.11010887298323, -35.2700474576177))
acls4_loc.add_point(PositionPoint(149.11048438224535, -35.27024892463094))
network.add(acls4_loc)
acls4 = AcLineSegment(mrid="acls4",
base_voltage=bv_416v,
length=75.6,
per_length_sequence_impedance=plsi_2,
location=acls4_loc)
acls4_t1 = Terminal(mrid='acls4-t1',
phases=PhaseCode.ABCN,
conducting_equipment=acls4)
network.connect_by_mrid(acls4_t1, 'Bus 27')
acls4.add_terminal(acls4_t1)
network.add(acls4_t1)
acls4_t2 = Terminal(mrid='acls4-t2',
phases=PhaseCode.ABCN,
conducting_equipment=acls4)
network.connect_by_mrid(acls4_t2, 'Bus 70')
acls4.add_terminal(acls4_t2)
network.add(acls4_t2)
network.add(acls4)
# ACLS5
acls5_loc = Location(mrid="acls5-loc")
acls5_loc.add_point(PositionPoint(149.11003377113082, -35.27061681962318))
acls5_loc.add_point(PositionPoint(149.110248347852, -35.27128253012409))
network.add(acls5_loc)
acls5 = AcLineSegment(mrid="acls5",
base_voltage=bv_416v,
length=25.5,
per_length_sequence_impedance=plsi_1,
location=acls5_loc)
acls5_t1 = Terminal(mrid='acls5-t1',
phases=PhaseCode.ABCN,
conducting_equipment=acls5)
network.connect_by_mrid(acls5_t1, connectivity_node_mrid)
acls5.add_terminal(acls5_t1)
network.add(acls5_t1)
acls5_t2 = Terminal(mrid='acls5-t2',
phases=PhaseCode.ABCN,
conducting_equipment=acls5)
network.connect_by_mrid(acls5_t2, 'Bus 32')
acls5.add_terminal(acls5_t2)
network.add(acls5_t2)
network.add(acls5)
# ACLS6
acls6_loc = Location(mrid="acls6-loc")
acls6_loc.add_point(PositionPoint(149.110248347852, -35.27128253012409))
acls6_loc.add_point(PositionPoint(149.11031272086836, -35.27192195742791))
network.add(acls6_loc)
acls6 = AcLineSegment(mrid="acls6",
base_voltage=bv_416v,
length=5.7,
per_length_sequence_impedance=plsi_2,
location=acls6_loc)
acls6_t1 = Terminal(mrid='acls6-t1',
phases=PhaseCode.ABCN,
conducting_equipment=acls6)
network.connect_by_mrid(acls6_t1, 'Bus 32')
acls6.add_terminal(acls6_t1)
network.add(acls6_t1)
acls6_t2 = Terminal(mrid='acls6-t2',
phases=PhaseCode.ABCN,
conducting_equipment=acls6)
network.connect_by_mrid(acls6_t2, 'Bus 36')
acls6.add_terminal(acls6_t2)
network.add(acls6_t2)
network.add(acls6)
# ACLS7
acls7_loc = Location(mrid="acls7-loc")
acls7_loc.add_point(PositionPoint(149.11031272086836, -35.27192195742791))
acls7_loc.add_point(PositionPoint(149.1108598915074, -35.271930716670994))
network.add(acls7_loc)
acls7 = AcLineSegment(mrid="acls7",
base_voltage=bv_416v,
length=12.65,
per_length_sequence_impedance=plsi_2,
location=acls7_loc)
acls7_t1 = Terminal(mrid='acls7-t1',
phases=PhaseCode.ABCN,
conducting_equipment=acls7)
network.connect_by_mrid(acls7_t1, 'Bus 36')
acls7.add_terminal(acls7_t1)
network.add(acls7_t1)
acls7_t2 = Terminal(mrid='acls7-t2',
phases=PhaseCode.ABCN,
conducting_equipment=acls7)
network.connect_by_mrid(acls7_t2, 'Bus 47')
acls7.add_terminal(acls7_t2)
network.add(acls7_t2)
network.add(acls7)