Skip to content

tswinb/ssm

 
 

Repository files navigation

Secure STOMP Messenger

Build Status Coverage Status Codacy Badge Maintainability

Secure STOMP Messenger (SSM) is designed to simply send messages using the STOMP protocol or via the ARGO Messaging Service (AMS). Messages are signed and may be encrypted during transit. Persistent queues should be used to guarantee delivery.

SSM is written in Python. Packages are available for RHEL 6 and 7, and Ubuntu Trusty.

For more information about SSM, see the EGI wiki.

Installing the RPM

Prerequisites

The EPEL repository must be enabled. This can be done by installing the RPM for your version of SL, which is available on this page: http://fedoraproject.org/wiki/EPEL

The Python STOMP library (N.B. versions 3.1.1 and above are currently supported)

  • yum install stomppy

The Python AMS library. See here for details on obtaining an RPM: https://github.com/ARGOeu/argo-ams-library/

The Python daemon library (N.B. only versions below 2.2.0 are currently supported)

  • yum install python-daemon

The Python ldap library

  • yum install python-ldap

Optionally, the Python dirq library (N.B. this is only required if your messages are stored in a dirq structure)

  • yum install python-dirq

You need a certificate and key in PEM format accessible to the SSM. There are a number of ways to do this. One is to make a copy of the hostcert and hostkey files, owned by the apel user (created later):

  • /etc/grid-security/hostcert-ssm.pem
  • /etc/grid-security/hostkey-ssm.pem These are the default settings in the configuration file ssm.cfg. You can use a different configuration if you prefer.

You need certificates against which you're going to verify any certs you use or receive in the directory /etc/grid-security/certificates (or other configured location). The best way to do this for EGI is to install the ca-policy-egi-core package:

  • cd /etc/yum.repos.d/
  • wget http://repository.egi.eu/sw/production/cas/1/current/repo-files/EGI-trustanchors.repo
  • yum install ca-policy-egi-core

If you want to check CRLs when verifying certificates, you need fetch_crl installed:

  • yum install fetch-crl
  • service fetch-crl-cron start
  • chkconfig fetch-crl-cron on

fetch-crl must have run once for the certificates to be verified successfully.

Installation

  • rpm -i apelssm-<version>.noarch.rpm

What the RPM does

The RPM carries out a number of steps to run the SSM in a specific way.

  1. It installs the core files in the Python libraries directory
  2. It installs scripts in /usr/bin
  3. It installs configuration files in /etc/apel
  4. It creates the messages directory /var/spool/apel/
  5. It creates the log directory /var/log/apel/
  6. It creates the pidfile directory /var/run/apel/
  7. It installs a service script in /etc/init.d/

Installing the DEB

Installation

Install APEL SSM:

  • dpkg -i apel-ssm_<version>_all.deb

Install any missing system packages needed for the SSM:

  • apt-get -f install

Install any missing Python requirements that don't have system packages:

  • pip install "stomp.py>=3.1.1" dirq

If you wish to run the SSM as a receiver, you will also need to install the python-daemon system package:

  • apt-get install python-daemon

What the DEB does

The DEB carries out a number of steps to run the SSM in a specific way.

  1. It installs the core files in the Python libraries directory
  2. It installs scripts in /usr/bin
  3. It installs configuration files in /etc/apel
  4. It creates the messages directory /var/spool/apel/
  5. It creates the log directory /var/log/apel/
  6. It creates the pidfile directory /var/run/apel/

Configuring the SSM

Create the apel user:

  • useradd -r apel

Ensure that the apel user running the SSM has access to the following:

  • the host certificate and key, or a copy
  • chown apel:apel /var/spool/apel/
  • chown apel:apel /var/log/apel/
  • chown apel:apel /var/run/apel

The configuration files are in /etc/apel/. The default configuration will send messages to the test APEL server.

Adding Files

There are multiple manual and programmatic ways to add files to be sent:

Manual

With the dirq module

All file and directory names must use hex characters: [0-9a-f].

  • Create a directory within /var/spool/apel/outgoing with a name of EIGHT hex characters e.g. 12345678
  • Put files in this directory with names of FOURTEEN hex e.g. 1234567890abcd

Without the dirq module

Ensure path_type: directory is set in your sender.cfg. Then add messages as files to /var/spool/apel/outgoing, there are no restrictions on the file names used.

Programmatic

With the dirq module

Use the Python or Perl dirq libraries:

Create a QueueSimple object with path /var/spool/apel/outgoing/ and add your messages.

Without the dirq module

Use the MessageDirectory class provided in ssm.message_directory.

Create a MessageDirectory object with path /var/spool/apel/outgoing/ and add your messages using the add method.

Running the SSM

Sender (sending via the EGI message brokers)

  • Run 'ssmsend'
  • SSM will pick up any messages and send them to the configured queue on the configured broker

Sender (sending via the ARGO Messaging Service (AMS))

  • Edit your sender configuration, usually under /etc/apel/sender.cfg, as per the migration instructions with some minor differences:
    • There is no need to add the [sender] section as it already exists. Instead change the protocol to AMS.
    • Set ams_project to the appropriate project.
  • Then run 'ssmsend'. SSM will pick up any messages and send them via the ARGO Messaging Service.

Sender (container)

docker run \
    -d --entrypoint ssmsend \
    -v /path/to/downloaded/config/sender.cfg:/etc/apel/sender.cfg \
    -v /path/to/read/messages:/var/spool/apel/outgoing \
    -v /etc/grid-security:/etc/grid-security \
    -v /path/to/persistently/log:/var/log/apel \
    stfc/ssm
  • The line -v /path/to/persistently/log:/var/log/apel \ is only required if you want to access the sender log as a file. If console: true is set in your sender.cfg, the container will also log to stdout/stderr.

Receiver (service)

  • Run service apelssm start
  • If this fails, check /var/log/apel/ssmreceive.log for details
  • To stop, run service apelssm stop

Receiver (container)

  • Download the example configuration file
  • Edit the downloaded receiver.cfg file to configure the queue and broker
  • Run the following docker command to launch containerized receiver process
docker run \
    -d --entrypoint ssmreceive \
    -v /path/to/downloaded/config/sender.cfg:/etc/apel/sender.cfg \
    -v /path/to/read/messages:/var/spool/apel/outgoing \
    -v /path/to/dns/file:/etc/apel/dns \
    -v /etc/grid-security:/etc/grid-security \
    -v /path/to/persistently/log:/var/log/apel \
    stfc/ssm
  • The line -v /path/to/persistently/log:/var/log/apel \ is only required if you want to access the receiver log as a file. If console: true is set in your receiver.cfg, the container will also log to stdout/stderr.

Receiver (manual)

  • Run 'ssmreceive'
  • SSM will receive any messages on the specified queue and write them to the filesystem
  • To stop, run 'kill `cat /var/run/apel/ssm.pid`'

Receiver (receiving via the ARGO Messaging Service (AMS))

  • Edit your receiver configuration, usually under /etc/apel/receiver.cfg, as per the migration instructions with some minor differences:
    • There is no need to add the [receiver] section as it already exists. Instead change the protocol to AMS.
    • Set ams_project to the appropriate project.
  • Then run your receiver (as a service, as a container or manually) as above.

Removing the RPM

  • rpm -e apelssm

Cleaning the system

  • yum remove stomppy

  • yum remove python-daemon

  • yum remove python-ldap

  • rm -rf /var/spool/apel

  • rm -rf /var/log/apel

  • rm -rf /var/run/apel

  • revert any changes to or copies of the host certificate and key

Packages

No packages published

Languages

  • Python 95.3%
  • Shell 4.0%
  • Dockerfile 0.7%