def print_defect_report():
r"""
Print a defect report.
"""
# Making deliberate choice to NOT run plug_in_setup(). We don't want
# ffdc_prefix updated.
rc, shell_rc, failed_plug_in_name = grpi.rprocess_plug_in_packages(
call_point='ffdc_report', stop_on_plug_in_failure=0)
# At some point I'd like to have the 'Call FFDC Methods' return a list
# of files it has collected. In that case, the following "ls" command
# would no longer be needed. For now, however, glob shows the files
# named in FFDC_LIST_FILE_PATH so I will refrain from printing those
# out (so we don't see duplicates in the list).
# Get additional header data which may have been created by ffdc plug-ins.
# Also, delete the individual header files to cleanup.
cmd_buf = "file_list=$(cat " + ffdc_report_list_path + " 2>/dev/null)" +\
" ; [ ! -z \"${file_list}\" ] && cat ${file_list}" +\
" 2>/dev/null ; rm -rf ${file_list} 2>/dev/null || :"
shell_rc, more_header_info = gc.cmd_fnc_u(cmd_buf,
print_output=0,
show_err=0)
# Get additional header data which may have been created by ffdc plug-ins.
# Also, delete the individual header files to cleanup.
cmd_buf = "file_list=$(cat " + ffdc_summary_list_path + " 2>/dev/null)" +\
" ; [ ! -z \"${file_list}\" ] && cat ${file_list}" +\
" 2>/dev/null ; rm -rf ${file_list} 2>/dev/null || :"
shell_rc, ffdc_summary_info = gc.cmd_fnc_u(cmd_buf,
print_output=0,
show_err=0)
LOG_PREFIX = BuiltIn().get_variable_value("${LOG_PREFIX}")
output = '\n'.join(sorted(glob.glob(LOG_PREFIX + '*')))
try:
ffdc_list = open(ffdc_list_file_path, 'r')
except IOError:
ffdc_list = ""
# Open ffdc_file_list for writing. We will write a complete list of
# FFDC files to it for possible use by plug-ins like cp_stop_check.
ffdc_list_file = open(ffdc_list_file_path, 'w')
gp.qprintn()
# indent=0, width=90, linefeed=1, char="="
gp.qprint_dashes(0, 90, 1, "=")
gp.qprintn("Copy this data to the defect:\n")
if len(more_header_info) > 0:
gp.qprintn(more_header_info)
gp.qpvars(host_name, host_ip, openbmc_nickname, openbmc_host,
openbmc_host_name, openbmc_ip, openbmc_username,
openbmc_password, os_host, os_host_name, os_ip, os_username,
os_password, pdu_host, pdu_host_name, pdu_ip, pdu_username,
pdu_password, pdu_slot_no, openbmc_serial_host,
openbmc_serial_host_name, openbmc_serial_ip, openbmc_serial_port)
gp.qprintn()
print_last_boots()
gp.qprintn()
gp.qprint_var(state)
gp.qprintn()
gp.qprintn("FFDC data files:")
if status_file_path != "":
gp.qprintn(status_file_path)
ffdc_list_file.write(status_file_path + "\n")
gp.qprintn(output)
# gp.qprintn(ffdc_list)
gp.qprintn()
if len(ffdc_summary_info) > 0:
gp.qprintn(ffdc_summary_info)
gp.qprint_dashes(0, 90, 1, "=")
ffdc_list_file.write(output + "\n")
ffdc_list_file.close()
def print_defect_report(ffdc_file_list):
r"""
Print a defect report.
Description of argument(s):
ffdc_file_list A list of files which were collected by our ffdc functions.
"""
# Making deliberate choice to NOT run plug_in_setup(). We don't want
# ffdc_prefix updated.
rc, shell_rc, failed_plug_in_name = grpi.rprocess_plug_in_packages(
call_point='ffdc_report', stop_on_plug_in_failure=0)
# Get additional header data which may have been created by ffdc plug-ins.
# Also, delete the individual header files to cleanup.
cmd_buf = "file_list=$(cat " + ffdc_report_list_path + " 2>/dev/null)" +\
" ; [ ! -z \"${file_list}\" ] && cat ${file_list}" +\
" 2>/dev/null ; rm -rf ${file_list} 2>/dev/null || :"
shell_rc, more_header_info = gc.cmd_fnc_u(cmd_buf,
print_output=0,
show_err=0)
# Get additional summary data which may have been created by ffdc plug-ins.
# Also, delete the individual header files to cleanup.
cmd_buf = "file_list=$(cat " + ffdc_summary_list_path + " 2>/dev/null)" +\
" ; [ ! -z \"${file_list}\" ] && cat ${file_list}" +\
" 2>/dev/null ; rm -rf ${file_list} 2>/dev/null || :"
shell_rc, ffdc_summary_info = gc.cmd_fnc_u(cmd_buf,
print_output=0,
show_err=0)
# ffdc_list_file_path contains a list of any ffdc files created by plug-
# ins, etc. Read that data into a list.
try:
plug_in_ffdc_list = \
open(ffdc_list_file_path, 'r').read().rstrip("\n").split("\n")
plug_in_ffdc_list = filter(None, plug_in_ffdc_list)
except IOError:
plug_in_ffdc_list = []
# Combine the files from plug_in_ffdc_list with the ffdc_file_list passed
# in. Eliminate duplicates and sort the list.
ffdc_file_list = sorted(set(ffdc_file_list + plug_in_ffdc_list))
if status_file_path != "":
ffdc_file_list.insert(0, status_file_path)
# Convert the list to a printable list.
printable_ffdc_file_list = "\n".join(ffdc_file_list)
# Open ffdc_file_list for writing. We will write a complete list of
# FFDC files to it for possible use by plug-ins like cp_stop_check.
ffdc_list_file = open(ffdc_list_file_path, 'w')
ffdc_list_file.write(printable_ffdc_file_list + "\n")
ffdc_list_file.close()
indent = 0
width = 90
linefeed = 1
char = "="
gp.qprintn()
gp.qprint_dashes(indent, width, linefeed, char)
gp.qprintn("Copy this data to the defect:\n")
if len(more_header_info) > 0:
gp.qprintn(more_header_info)
gp.qpvars(host_name, host_ip, openbmc_nickname, openbmc_host,
openbmc_host_name, openbmc_ip, openbmc_username,
openbmc_password, os_host, os_host_name, os_ip, os_username,
os_password, pdu_host, pdu_host_name, pdu_ip, pdu_username,
pdu_password, pdu_slot_no, openbmc_serial_host,
openbmc_serial_host_name, openbmc_serial_ip, openbmc_serial_port)
gp.qprintn()
print_last_boots()
gp.qprintn()
gp.qprint_var(state)
gp.qprintn()
gp.qprintn("FFDC data files:")
gp.qprintn(printable_ffdc_file_list)
gp.qprintn()
if len(ffdc_summary_info) > 0:
gp.qprintn(ffdc_summary_info)
gp.qprint_dashes(indent, width, linefeed, char)
def print_defect_report(ffdc_file_list):
r"""
Print a defect report.
Description of argument(s):
ffdc_file_list A list of files which were collected by our ffdc functions.
"""
# Making deliberate choice to NOT run plug_in_setup(). We don't want
# ffdc_prefix updated.
rc, shell_rc, failed_plug_in_name = grpi.rprocess_plug_in_packages(
call_point='ffdc_report', stop_on_plug_in_failure=0)
# Get additional header data which may have been created by ffdc plug-ins.
# Also, delete the individual header files to cleanup.
cmd_buf = "file_list=$(cat " + ffdc_report_list_path + " 2>/dev/null)" +\
" ; [ ! -z \"${file_list}\" ] && cat ${file_list}" +\
" 2>/dev/null ; rm -rf ${file_list} 2>/dev/null || :"
shell_rc, more_header_info = gc.cmd_fnc_u(cmd_buf, print_output=0,
show_err=0)
# Get additional summary data which may have been created by ffdc plug-ins.
# Also, delete the individual header files to cleanup.
cmd_buf = "file_list=$(cat " + ffdc_summary_list_path + " 2>/dev/null)" +\
" ; [ ! -z \"${file_list}\" ] && cat ${file_list}" +\
" 2>/dev/null ; rm -rf ${file_list} 2>/dev/null || :"
shell_rc, ffdc_summary_info = gc.cmd_fnc_u(cmd_buf, print_output=0,
show_err=0)
# ffdc_list_file_path contains a list of any ffdc files created by plug-
# ins, etc. Read that data into a list.
try:
plug_in_ffdc_list = \
open(ffdc_list_file_path, 'r').read().rstrip("\n").split("\n")
plug_in_ffdc_list = filter(None, plug_in_ffdc_list)
except IOError:
plug_in_ffdc_list = []
# Combine the files from plug_in_ffdc_list with the ffdc_file_list passed
# in. Eliminate duplicates and sort the list.
ffdc_file_list = sorted(set(ffdc_file_list + plug_in_ffdc_list))
if status_file_path != "":
ffdc_file_list.insert(0, status_file_path)
# Convert the list to a printable list.
printable_ffdc_file_list = "\n".join(ffdc_file_list)
# Open ffdc_file_list for writing. We will write a complete list of
# FFDC files to it for possible use by plug-ins like cp_stop_check.
ffdc_list_file = open(ffdc_list_file_path, 'w')
ffdc_list_file.write(printable_ffdc_file_list + "\n")
ffdc_list_file.close()
indent = 0
width = 90
linefeed = 1
char = "="
gp.qprintn()
gp.qprint_dashes(indent, width, linefeed, char)
gp.qprintn("Copy this data to the defect:\n")
if len(more_header_info) > 0:
gp.qprintn(more_header_info)
gp.qpvars(host_name, host_ip, openbmc_nickname, openbmc_host,
openbmc_host_name, openbmc_ip, openbmc_username,
openbmc_password, os_host, os_host_name, os_ip, os_username,
os_password, pdu_host, pdu_host_name, pdu_ip, pdu_username,
pdu_password, pdu_slot_no, openbmc_serial_host,
openbmc_serial_host_name, openbmc_serial_ip, openbmc_serial_port)
gp.qprintn()
print_last_boots()
gp.qprintn()
gp.qprint_var(state)
gp.qprintn()
gp.qprintn("FFDC data files:")
gp.qprintn(printable_ffdc_file_list)
gp.qprintn()
if len(ffdc_summary_info) > 0:
gp.qprintn(ffdc_summary_info)
gp.qprint_dashes(indent, width, linefeed, char)
def print_defect_report():
r"""
Print a defect report.
"""
# Making deliberate choice to NOT run plug_in_setup(). We don't want
# ffdc_prefix updated.
rc, shell_rc, failed_plug_in_name = grpi.rprocess_plug_in_packages(
call_point='ffdc_report', stop_on_plug_in_failure=0)
# At some point I'd like to have the 'Call FFDC Methods' return a list
# of files it has collected. In that case, the following "ls" command
# would no longer be needed. For now, however, glob shows the files
# named in FFDC_LIST_FILE_PATH so I will refrain from printing those
# out (so we don't see duplicates in the list).
# Get additional header data which may have been created by ffdc plug-ins.
# Also, delete the individual header files to cleanup.
cmd_buf = "file_list=$(cat " + ffdc_report_list_path + " 2>/dev/null)" +\
" ; [ ! -z \"${file_list}\" ] && cat ${file_list}" +\
" 2>/dev/null ; rm -rf ${file_list} 2>/dev/null || :"
shell_rc, more_header_info = gc.cmd_fnc_u(cmd_buf, print_output=0,
show_err=0)
# Get additional header data which may have been created by ffdc plug-ins.
# Also, delete the individual header files to cleanup.
cmd_buf = "file_list=$(cat " + ffdc_summary_list_path + " 2>/dev/null)" +\
" ; [ ! -z \"${file_list}\" ] && cat ${file_list}" +\
" 2>/dev/null ; rm -rf ${file_list} 2>/dev/null || :"
shell_rc, ffdc_summary_info = gc.cmd_fnc_u(cmd_buf, print_output=0,
show_err=0)
LOG_PREFIX = BuiltIn().get_variable_value("${LOG_PREFIX}")
output = '\n'.join(sorted(glob.glob(LOG_PREFIX + '*')))
try:
ffdc_list = open(ffdc_list_file_path, 'r')
except IOError:
ffdc_list = ""
# Open ffdc_file_list for writing. We will write a complete list of
# FFDC files to it for possible use by plug-ins like cp_stop_check.
ffdc_list_file = open(ffdc_list_file_path, 'w')
gp.qprintn()
# indent=0, width=90, linefeed=1, char="="
gp.qprint_dashes(0, 90, 1, "=")
gp.qprintn("Copy this data to the defect:\n")
if len(more_header_info) > 0:
gp.printn(more_header_info)
gp.qpvars(host_name, host_ip, openbmc_nickname, openbmc_host,
openbmc_host_name, openbmc_ip, openbmc_username,
openbmc_password, os_host, os_host_name, os_ip, os_username,
os_password, pdu_host, pdu_host_name, pdu_ip, pdu_username,
pdu_password, pdu_slot_no, openbmc_serial_host,
openbmc_serial_host_name, openbmc_serial_ip, openbmc_serial_port)
gp.qprintn()
print_last_boots()
gp.qprintn()
gp.qprint_var(state)
gp.qprintn()
gp.qprintn("FFDC data files:")
if status_file_path != "":
gp.qprintn(status_file_path)
ffdc_list_file.write(status_file_path + "\n")
gp.qprintn(output)
# gp.qprintn(ffdc_list)
gp.qprintn()
if len(ffdc_summary_info) > 0:
gp.printn(ffdc_summary_info)
gp.qprint_dashes(0, 90, 1, "=")
ffdc_list_file.write(output + "\n")
ffdc_list_file.close()
def robot_cmd_fnc(robot_cmd_buf,
robot_jail=os.environ.get('ROBOT_JAIL', ''),
gzip=1):
r"""
Run the robot command string.
This function will set the various PATH variables correctly so that you
are running the proper version of all imported files, etc.
Description of argument(s):
robot_cmd_buf The complete robot command string.
robot_jail Indicates that this is to run in "robot
jail" meaning without visibility to any
apolloxxx import files, programs, etc.
gqip This indicates that the log, report and
output files produced by robot should be
gzipped to save space.
"""
if not gv.valid_value(robot_cmd_buf):
return False
# Get globals set by init_robot_test_base_dir_path().
module = sys.modules["__main__"]
try:
ROBOT_TEST_BASE_DIR_PATH = getattr(module, "ROBOT_TEST_BASE_DIR_PATH")
except NameError:
init_robot_test_base_dir_path()
ROBOT_TEST_BASE_DIR_PATH = getattr(module, "ROBOT_TEST_BASE_DIR_PATH")
ROBOT_TEST_RUNNING_FROM_SB = \
gm.get_mod_global("ROBOT_TEST_RUNNING_FROM_SB")
if robot_jail == "":
if ROBOT_TEST_RUNNING_FROM_SB:
robot_jail = 0
else:
robot_jail = 1
robot_jail = int(robot_jail)
ROBOT_JAIL = os.environ.get('ROBOT_JAIL', '')
gp.dprint_vars(ROBOT_TEST_BASE_DIR_PATH, ROBOT_TEST_RUNNING_FROM_SB,
ROBOT_JAIL, robot_jail)
# Save PATH and PYTHONPATH to be restored later.
os.environ["SAVED_PYTHONPATH"] = os.environ.get("PYTHONPATH", "")
os.environ["SAVED_PATH"] = os.environ.get("PATH", "")
if robot_jail:
PYTHONPATH = ROBOT_TEST_BASE_DIR_PATH + "lib"
NEW_PATH_LIST = [ROBOT_TEST_BASE_DIR_PATH + "bin"]
# Coding special case to preserve python27_path.
python27_path = "/opt/rh/python27/root/usr/bin"
PATH_LIST = os.environ.get("PATH", "").split(":")
if python27_path in PATH_LIST:
NEW_PATH_LIST.append(python27_path)
NEW_PATH_LIST.extend([
"/usr/local/sbin", "/usr/local/bin", "/usr/sbin", "/usr/bin",
"/sbin", "/bin"
])
PATH = ":".join(NEW_PATH_LIST)
else:
PYTHONPATH = os.environ.get('PYTHONPATH', '') + ":" +\
ROBOT_TEST_BASE_DIR_PATH + "lib/"
PATH = os.environ.get('PATH', '') + ":" + ROBOT_TEST_BASE_DIR_PATH +\
"bin/"
os.environ['PYTHONPATH'] = PYTHONPATH
os.environ['PATH'] = PATH
gp.dprint_vars(PATH, PYTHONPATH)
os.environ['FFDC_DIR_PATH_STYLE'] = os.environ.get('FFDC_DIR_PATH_STYLE',
'1')
test_mode = getattr(module, "test_mode")
gp.qpissuing(robot_cmd_buf, test_mode)
if test_mode:
os.environ["PATH"] = os.environ.get("SAVED_PATH", "")
os.environ["PYTHONPATH"] = os.environ.get("SAVED_PYTHONPATH", "")
return True
if quiet:
DEVNULL = open(os.devnull, 'wb')
stdout = DEVNULL
else:
stdout = None
sub_proc = subprocess.Popen(robot_cmd_buf, stdout=stdout, shell=True)
sub_proc.communicate()
shell_rc = sub_proc.returncode
if shell_rc != 0:
hex = 1
gp.pvar(shell_rc, hex)
os.environ["PATH"] = os.environ.get("SAVED_PATH", "")
os.environ["PYTHONPATH"] = os.environ.get("SAVED_PYTHONPATH", "")
return False
os.environ["PATH"] = os.environ.get("SAVED_PATH", "")
os.environ["PYTHONPATH"] = os.environ.get("SAVED_PYTHONPATH", "")
if not gzip:
return True
# gzip the output files.
# Retrieve the parms from the robot command buffer.
robot_cmd_buf_dict = gc.parse_command_string(robot_cmd_buf)
# Get prefix from the log parm.
prefix = re.sub('log\\.html$', '', robot_cmd_buf_dict['log'])
gp.qprintn()
rc, outbuf = gc.cmd_fnc("cd " + robot_cmd_buf_dict['outputdir'] +
" ; gzip " + robot_cmd_buf_dict['output'] + " " +
robot_cmd_buf_dict['log'] + " " +
robot_cmd_buf_dict['report'])
outputdir = gm.add_trailing_slash(robot_cmd_buf_dict['outputdir'])
Output = outputdir + robot_cmd_buf_dict['output'] + ".gz"
Log = outputdir + robot_cmd_buf_dict['log'] + ".gz"
Report = outputdir + robot_cmd_buf_dict['report'] + ".gz"
gp.qprintn("\ngzipped output:")
gp.qpvars(0, 9, Output, Log, Report)
return True