def getPlatform(anaconda):
"""Check the architecture of the system and return an instance of a
Platform subclass to match. If the architecture could not be determined,
raise an exception."""
if iutil.isPPC():
ppcMachine = iutil.getPPCMachine()
if (ppcMachine == "PMac" and iutil.getPPCMacGen() == "NewWorld"):
return NewWorldPPC(anaconda)
elif ppcMachine in ["iSeries", "pSeries"]:
return IPSeriesPPC(anaconda)
elif ppcMachine == "PS3":
return PS3(anaconda)
else:
raise SystemError, "Unsupported PPC machine type"
elif iutil.isS390():
return S390(anaconda)
elif iutil.isSparc():
return Sparc(anaconda)
elif iutil.isEfi():
if iutil.isMactel():
return MacEFI(anaconda)
else:
return EFI(anaconda)
elif iutil.isX86():
return X86(anaconda)
elif iutil.isARM():
return ARM(anaconda)
else:
raise SystemError, "Could not determine system architecture."
def bootloaderSetupChoices(anaconda):
if anaconda.dir == DISPATCH_BACK:
rc = anaconda.intf.messageWindow(_("Warning"),
_("Filesystems have already been activated. You "
"cannot go back past this point.\n\nWould you like to "
"continue with the installation?"),
type="custom", custom_icon=["error","error"],
custom_buttons=[_("_Exit installer"), _("_Continue")])
if rc == 0:
sys.exit(0)
return DISPATCH_FORWARD
if anaconda.ksdata and anaconda.ksdata.bootloader.driveorder:
anaconda.bootloader.updateDriveList(anaconda.ksdata.bootloader.driveorder)
else:
#We want the selected bootloader drive to be preferred
pref = anaconda.bootloader.drivelist[:1]
anaconda.bootloader.updateDriveList(pref)
if iutil.isEfi() and not anaconda.bootloader.device:
bootPart = None
partitions = anaconda.storage.partitions
for part in partitions:
if part.partedPartition.active and isEfiSystemPartition(part.partedPartition):
bootPart = part.name
break
if bootPart:
anaconda.bootloader.setDevice(bootPart)
# iSeries bootloader on upgrades
if iutil.getPPCMachine() == "iSeries" and not anaconda.bootloader.device:
bootPart = None
partitions = anaconda.storage.partitions
for part in partitions:
if part.partedPartition.active and \
part.partedPartition.getFlag(parted.PARTITION_PREP):
bootPart = part.name
break
if bootPart:
anaconda.bootloader.setDevice(bootPart)
choices = anaconda.platform.bootloaderChoices(anaconda.bootloader)
if not choices and iutil.getPPCMachine() != "iSeries":
anaconda.dispatch.skipStep("instbootloader")
else:
anaconda.dispatch.skipStep("instbootloader", skip = 0)
# FIXME: ...
anaconda.bootloader.images.setup(anaconda.storage)
if anaconda.bootloader.defaultDevice != None and choices:
keys = choices.keys()
# there are only two possible things that can be in the keys
# mbr and boot. boot is ALWAYS present. so if the dev isn't
# listed, it was mbr and we should nicely fall back to boot
if anaconda.bootloader.defaultDevice not in keys:
log.warning("MBR not suitable as boot device; installing to partition")
anaconda.bootloader.defaultDevice = "boot"
anaconda.bootloader.setDevice(choices[anaconda.bootloader.defaultDevice][0])
elif choices and iutil.isMactel() and choices.has_key("boot"): # haccckkkk
anaconda.bootloader.setDevice(choices["boot"][0])
elif choices and choices.has_key("mbr"):
anaconda.bootloader.setDevice(choices["mbr"][0])
elif choices and choices.has_key("boot"):
anaconda.bootloader.setDevice(choices["boot"][0])
def bootloaderSetupChoices(anaconda):
if anaconda.dir == DISPATCH_BACK:
return
# FIXME: this is a hack...
if flags.livecd:
return
if anaconda.id.ksdata:
anaconda.id.bootloader.updateDriveList(anaconda.id.ksdata.bootloader["driveorder"])
else:
anaconda.id.bootloader.updateDriveList()
# iSeries bootloader on upgrades
if iutil.getPPCMachine() == "iSeries" and not anaconda.id.bootloader.device:
drives = anaconda.id.diskset.disks.keys()
drives.sort()
bootPart = None
for drive in drives:
disk = anaconda.id.diskset.disks[drive]
part = disk.next_partition()
while part:
if part.is_active() and part.native_type == 0x41:
bootPart = partedUtils.get_partition_name(part)
break
part = disk.next_partition(part)
if bootPart:
break
if bootPart:
anaconda.id.bootloader.setDevice(bootPart)
dev = Device()
dev.device = bootPart
anaconda.id.fsset.add(FileSystemSetEntry(dev, None, fileSystemTypeGet("PPC PReP Boot")))
choices = anaconda.id.fsset.bootloaderChoices(anaconda.id.diskset, anaconda.id.bootloader)
if not choices and iutil.getPPCMachine() != "iSeries":
anaconda.dispatch.skipStep("instbootloader")
else:
anaconda.dispatch.skipStep("instbootloader", skip = 0)
anaconda.id.bootloader.images.setup(anaconda.id.diskset, anaconda.id.fsset)
if anaconda.id.bootloader.defaultDevice != None and choices:
keys = choices.keys()
# there are only two possible things that can be in the keys
# mbr and boot. boot is ALWAYS present. so if the dev isn't
# listed, it was mbr and we should nicely fall back to boot
if anaconda.id.bootloader.defaultDevice not in keys:
log.warning("MBR not suitable as boot device; installing to partition")
anaconda.id.bootloader.defaultDevice = "boot"
anaconda.id.bootloader.setDevice(choices[anaconda.id.bootloader.defaultDevice][0])
elif choices and iutil.isMactel() and choices.has_key("boot"): # haccckkkk
anaconda.id.bootloader.setDevice(choices["boot"][0])
elif choices and choices.has_key("mbr") and not \
(choices.has_key("boot") and choices["boot"][1] == N_("RAID Device")):
anaconda.id.bootloader.setDevice(choices["mbr"][0])
elif choices and choices.has_key("boot"):
anaconda.id.bootloader.setDevice(choices["boot"][0])
bootDev = anaconda.id.fsset.getEntryByMountPoint("/")
if not bootDev:
bootDev = anaconda.id.fsset.getEntryByMountPoint("/boot")
part = partedUtils.get_partition_by_name(anaconda.id.diskset.disks,
bootDev.device.getDevice())
if part and partedUtils.end_sector_to_cyl(part.geom.dev,
part.geom.end) >= 1024:
anaconda.id.bootloader.above1024 = 1
def bootloaderSetupChoices(anaconda):
if anaconda.dir == DISPATCH_BACK:
return
# FIXME: this is a hack...
if flags.livecd:
return
if anaconda.id.ksdata:
anaconda.id.bootloader.updateDriveList(
anaconda.id.ksdata.bootloader["driveorder"])
else:
anaconda.id.bootloader.updateDriveList()
# iSeries bootloader on upgrades
if iutil.getPPCMachine(
) == "iSeries" and not anaconda.id.bootloader.device:
drives = anaconda.id.diskset.disks.keys()
drives.sort()
bootPart = None
for drive in drives:
disk = anaconda.id.diskset.disks[drive]
part = disk.next_partition()
while part:
if part.is_active() and part.native_type == 0x41:
bootPart = partedUtils.get_partition_name(part)
break
part = disk.next_partition(part)
if bootPart:
break
if bootPart:
anaconda.id.bootloader.setDevice(bootPart)
dev = Device()
dev.device = bootPart
anaconda.id.fsset.add(
FileSystemSetEntry(dev, None,
fileSystemTypeGet("PPC PReP Boot")))
choices = anaconda.id.fsset.bootloaderChoices(anaconda.id.diskset,
anaconda.id.bootloader)
if not choices and iutil.getPPCMachine() != "iSeries":
anaconda.dispatch.skipStep("instbootloader")
else:
anaconda.dispatch.skipStep("instbootloader", skip=0)
anaconda.id.bootloader.images.setup(anaconda.id.diskset, anaconda.id.fsset)
if anaconda.id.bootloader.defaultDevice != None and choices:
keys = choices.keys()
# there are only two possible things that can be in the keys
# mbr and boot. boot is ALWAYS present. so if the dev isn't
# listed, it was mbr and we should nicely fall back to boot
if anaconda.id.bootloader.defaultDevice not in keys:
log.warning(
"MBR not suitable as boot device; installing to partition")
anaconda.id.bootloader.defaultDevice = "boot"
anaconda.id.bootloader.setDevice(
choices[anaconda.id.bootloader.defaultDevice][0])
elif choices and iutil.isMactel() and choices.has_key("boot"): # haccckkkk
anaconda.id.bootloader.setDevice(choices["boot"][0])
elif choices and choices.has_key("mbr") and not \
(choices.has_key("boot") and choices["boot"][1] == N_("RAID Device")):
anaconda.id.bootloader.setDevice(choices["mbr"][0])
elif choices and choices.has_key("boot"):
anaconda.id.bootloader.setDevice(choices["boot"][0])
bootDev = anaconda.id.fsset.getEntryByMountPoint("/")
if not bootDev:
bootDev = anaconda.id.fsset.getEntryByMountPoint("/boot")
part = partedUtils.get_partition_by_name(anaconda.id.diskset.disks,
bootDev.device.getDevice())
if part and partedUtils.end_sector_to_cyl(part.geom.dev,
part.geom.end) >= 1024:
anaconda.id.bootloader.above1024 = 1
