Ejemplo n.º 1
0
def updatelfiles(ui,
                 repo,
                 filelist=None,
                 printmessage=None,
                 normallookup=False,
                 checked=False):
    '''Update largefiles according to standins in the working directory

    If ``printmessage`` is other than ``None``, it means "print (or
    ignore, for false) message forcibly".
    '''
    statuswriter = lfutil.getstatuswriter(ui, repo, printmessage)
    wlock = repo.wlock()
    try:
        lfdirstate = lfutil.openlfdirstate(ui, repo)
        lfiles = set(lfutil.listlfiles(repo)) | set(lfdirstate)

        if filelist is not None:
            filelist = set(filelist)
            lfiles = [f for f in lfiles if f in filelist]

        update = {}
        updated, removed = 0, 0
        for lfile in lfiles:
            abslfile = repo.wjoin(lfile)
            absstandin = repo.wjoin(lfutil.standin(lfile))
            if os.path.exists(absstandin):
                if (os.path.exists(absstandin + '.orig')
                        and os.path.exists(abslfile)):
                    shutil.copyfile(abslfile, abslfile + '.orig')
                    util.unlinkpath(absstandin + '.orig')
                expecthash = lfutil.readstandin(repo, lfile)
                if (expecthash != ''
                        and (checked or not os.path.exists(abslfile)
                             or expecthash != lfutil.hashfile(abslfile))):
                    if lfile not in repo[None]:  # not switched to normal file
                        util.unlinkpath(abslfile, ignoremissing=True)
                    # use normallookup() to allocate an entry in largefiles
                    # dirstate, because lack of it misleads
                    # lfilesrepo.status() into recognition that such cache
                    # missing files are removed.
                    lfdirstate.normallookup(lfile)
                    update[lfile] = expecthash
            else:
                # Remove lfiles for which the standin is deleted, unless the
                # lfile is added to the repository again. This happens when a
                # largefile is converted back to a normal file: the standin
                # disappears, but a new (normal) file appears as the lfile.
                if (os.path.exists(abslfile)
                        and repo.dirstate.normalize(lfile) not in repo[None]):
                    util.unlinkpath(abslfile)
                    removed += 1

        # largefile processing might be slow and be interrupted - be prepared
        lfdirstate.write()

        if lfiles:
            statuswriter(_('getting changed largefiles\n'))
            cachelfiles(ui, repo, None, lfiles)

        for lfile in lfiles:
            update1 = 0

            expecthash = update.get(lfile)
            if expecthash:
                if not lfutil.copyfromcache(repo, expecthash, lfile):
                    # failed ... but already removed and set to normallookup
                    continue
                # Synchronize largefile dirstate to the last modified
                # time of the file
                lfdirstate.normal(lfile)
                update1 = 1

            # copy the state of largefile standin from the repository's
            # dirstate to its state in the lfdirstate.
            abslfile = repo.wjoin(lfile)
            absstandin = repo.wjoin(lfutil.standin(lfile))
            if os.path.exists(absstandin):
                mode = os.stat(absstandin).st_mode
                if mode != os.stat(abslfile).st_mode:
                    os.chmod(abslfile, mode)
                    update1 = 1

            updated += update1

            lfutil.synclfdirstate(repo, lfdirstate, lfile, normallookup)

        lfdirstate.write()
        if lfiles:
            statuswriter(
                _('%d largefiles updated, %d removed\n') % (updated, removed))
    finally:
        wlock.release()
Ejemplo n.º 2
0
def updatelfiles(ui, repo, filelist=None, printmessage=None,
                 normallookup=False):
    '''Update largefiles according to standins in the working directory

    If ``printmessage`` is other than ``None``, it means "print (or
    ignore, for false) message forcibly".
    '''
    statuswriter = lfutil.getstatuswriter(ui, repo, printmessage)
    wlock = repo.wlock()
    try:
        lfdirstate = lfutil.openlfdirstate(ui, repo)
        lfiles = set(lfutil.listlfiles(repo)) | set(lfdirstate)

        if filelist is not None:
            filelist = set(filelist)
            lfiles = [f for f in lfiles if f in filelist]

        update = {}
        updated, removed = 0, 0
        for lfile in lfiles:
            abslfile = repo.wjoin(lfile)
            absstandin = repo.wjoin(lfutil.standin(lfile))
            if os.path.exists(absstandin):
                if (os.path.exists(absstandin + '.orig') and
                    os.path.exists(abslfile)):
                    shutil.copyfile(abslfile, abslfile + '.orig')
                    util.unlinkpath(absstandin + '.orig')
                expecthash = lfutil.readstandin(repo, lfile)
                if expecthash != '':
                    if lfile not in repo[None]: # not switched to normal file
                        util.unlinkpath(abslfile, ignoremissing=True)
                    # use normallookup() to allocate an entry in largefiles
                    # dirstate to prevent lfilesrepo.status() from reporting
                    # missing files as removed.
                    lfdirstate.normallookup(lfile)
                    update[lfile] = expecthash
            else:
                # Remove lfiles for which the standin is deleted, unless the
                # lfile is added to the repository again. This happens when a
                # largefile is converted back to a normal file: the standin
                # disappears, but a new (normal) file appears as the lfile.
                if (os.path.exists(abslfile) and
                    repo.dirstate.normalize(lfile) not in repo[None]):
                    util.unlinkpath(abslfile)
                    removed += 1

        # largefile processing might be slow and be interrupted - be prepared
        lfdirstate.write()

        if lfiles:
            statuswriter(_('getting changed largefiles\n'))
            cachelfiles(ui, repo, None, lfiles)

        for lfile in lfiles:
            update1 = 0

            expecthash = update.get(lfile)
            if expecthash:
                if not lfutil.copyfromcache(repo, expecthash, lfile):
                    # failed ... but already removed and set to normallookup
                    continue
                # Synchronize largefile dirstate to the last modified
                # time of the file
                lfdirstate.normal(lfile)
                update1 = 1

            # copy the state of largefile standin from the repository's
            # dirstate to its state in the lfdirstate.
            abslfile = repo.wjoin(lfile)
            absstandin = repo.wjoin(lfutil.standin(lfile))
            if os.path.exists(absstandin):
                mode = os.stat(absstandin).st_mode
                if mode != os.stat(abslfile).st_mode:
                    os.chmod(abslfile, mode)
                    update1 = 1

            updated += update1

            lfutil.synclfdirstate(repo, lfdirstate, lfile, normallookup)

        lfdirstate.write()
        if lfiles:
            statuswriter(_('%d largefiles updated, %d removed\n') % (updated,
                removed))
    finally:
        wlock.release()
Ejemplo n.º 3
0
def updatelfiles(ui, repo, filelist=None, printmessage=True,
                 normallookup=False):
    wlock = repo.wlock()
    try:
        lfdirstate = lfutil.openlfdirstate(ui, repo)
        lfiles = set(lfutil.listlfiles(repo)) | set(lfdirstate)

        if filelist is not None:
            filelist = set(filelist)
            lfiles = [f for f in lfiles if f in filelist]

        update = {}
        updated, removed = 0, 0
        for lfile in lfiles:
            abslfile = repo.wjoin(lfile)
            absstandin = repo.wjoin(lfutil.standin(lfile))
            if os.path.exists(absstandin):
                if (os.path.exists(absstandin + '.orig') and
                    os.path.exists(abslfile)):
                    shutil.copyfile(abslfile, abslfile + '.orig')
                    util.unlinkpath(absstandin + '.orig')
                expecthash = lfutil.readstandin(repo, lfile)
                if (expecthash != '' and
                    (not os.path.exists(abslfile) or
                     expecthash != lfutil.hashfile(abslfile))):
                    if lfile not in repo[None]: # not switched to normal file
                        util.unlinkpath(abslfile, ignoremissing=True)
                    # use normallookup() to allocate entry in largefiles
                    # dirstate, because lack of it misleads
                    # lfilesrepo.status() into recognition that such cache
                    # missing files are REMOVED.
                    lfdirstate.normallookup(lfile)
                    update[lfile] = expecthash
            else:
                # Remove lfiles for which the standin is deleted, unless the
                # lfile is added to the repository again. This happens when a
                # largefile is converted back to a normal file: the standin
                # disappears, but a new (normal) file appears as the lfile.
                if (os.path.exists(abslfile) and
                    repo.dirstate.normalize(lfile) not in repo[None]):
                    util.unlinkpath(abslfile)
                    removed += 1

        # largefile processing might be slow and be interrupted - be prepared
        lfdirstate.write()

        if lfiles:
            if printmessage:
                ui.status(_('getting changed largefiles\n'))
            cachelfiles(ui, repo, None, lfiles)

        for lfile in lfiles:
            update1 = 0

            expecthash = update.get(lfile)
            if expecthash:
                if not lfutil.copyfromcache(repo, expecthash, lfile):
                    # failed ... but already removed and set to normallookup
                    continue
                # Synchronize largefile dirstate to the last modified
                # time of the file
                lfdirstate.normal(lfile)
                update1 = 1

            # copy the state of largefile standin from the repository's
            # dirstate to its state in the lfdirstate.
            abslfile = repo.wjoin(lfile)
            absstandin = repo.wjoin(lfutil.standin(lfile))
            if os.path.exists(absstandin):
                mode = os.stat(absstandin).st_mode
                if mode != os.stat(abslfile).st_mode:
                    os.chmod(abslfile, mode)
                    update1 = 1

            updated += update1

            lfutil.synclfdirstate(repo, lfdirstate, lfile, normallookup)

        if filelist is not None:
            # If "local largefile" is chosen at file merging, it is
            # not listed in "filelist" (= dirstate syncing is
            # omitted), because the standin file is not changed before and
            # after merging.
            # But the status of such files may have to be changed by
            # merging. For example, locally modified ("M") largefile
            # has to become re-added("A"), if it is "normal" file in
            # the target revision of linear-merging.
            for lfile in lfdirstate:
                if lfile not in filelist:
                    lfutil.synclfdirstate(repo, lfdirstate, lfile, True)

        lfdirstate.write()
        if printmessage and lfiles:
            ui.status(_('%d largefiles updated, %d removed\n') % (updated,
                removed))
    finally:
        wlock.release()
Ejemplo n.º 4
0
def updatelfiles(ui,
                 repo,
                 filelist=None,
                 printmessage=True,
                 normallookup=False):
    wlock = repo.wlock()
    try:
        lfdirstate = lfutil.openlfdirstate(ui, repo)
        lfiles = set(lfutil.listlfiles(repo)) | set(lfdirstate)

        if filelist is not None:
            filelist = set(filelist)
            lfiles = [f for f in lfiles if f in filelist]

        update = {}
        updated, removed = 0, 0
        for lfile in lfiles:
            abslfile = repo.wjoin(lfile)
            absstandin = repo.wjoin(lfutil.standin(lfile))
            if os.path.exists(absstandin):
                if (os.path.exists(absstandin + '.orig')
                        and os.path.exists(abslfile)):
                    shutil.copyfile(abslfile, abslfile + '.orig')
                    util.unlinkpath(absstandin + '.orig')
                expecthash = lfutil.readstandin(repo, lfile)
                if (expecthash != ''
                        and (not os.path.exists(abslfile)
                             or expecthash != lfutil.hashfile(abslfile))):
                    if lfile not in repo[None]:  # not switched to normal file
                        util.unlinkpath(abslfile, ignoremissing=True)
                    # use normallookup() to allocate entry in largefiles
                    # dirstate, because lack of it misleads
                    # lfilesrepo.status() into recognition that such cache
                    # missing files are REMOVED.
                    lfdirstate.normallookup(lfile)
                    update[lfile] = expecthash
            else:
                # Remove lfiles for which the standin is deleted, unless the
                # lfile is added to the repository again. This happens when a
                # largefile is converted back to a normal file: the standin
                # disappears, but a new (normal) file appears as the lfile.
                if (os.path.exists(abslfile)
                        and repo.dirstate.normalize(lfile) not in repo[None]):
                    util.unlinkpath(abslfile)
                    removed += 1

        # largefile processing might be slow and be interrupted - be prepared
        lfdirstate.write()

        if lfiles:
            if printmessage:
                ui.status(_('getting changed largefiles\n'))
            cachelfiles(ui, repo, None, lfiles)

        for lfile in lfiles:
            update1 = 0

            expecthash = update.get(lfile)
            if expecthash:
                if not lfutil.copyfromcache(repo, expecthash, lfile):
                    # failed ... but already removed and set to normallookup
                    continue
                # Synchronize largefile dirstate to the last modified
                # time of the file
                lfdirstate.normal(lfile)
                update1 = 1

            # copy the state of largefile standin from the repository's
            # dirstate to its state in the lfdirstate.
            abslfile = repo.wjoin(lfile)
            absstandin = repo.wjoin(lfutil.standin(lfile))
            if os.path.exists(absstandin):
                mode = os.stat(absstandin).st_mode
                if mode != os.stat(abslfile).st_mode:
                    os.chmod(abslfile, mode)
                    update1 = 1

            updated += update1

            lfutil.synclfdirstate(repo, lfdirstate, lfile, normallookup)

        if filelist is not None:
            # If "local largefile" is chosen at file merging, it is
            # not listed in "filelist" (= dirstate syncing is
            # omitted), because the standin file is not changed before and
            # after merging.
            # But the status of such files may have to be changed by
            # merging. For example, locally modified ("M") largefile
            # has to become re-added("A"), if it is "normal" file in
            # the target revision of linear-merging.
            for lfile in lfdirstate:
                if lfile not in filelist:
                    lfutil.synclfdirstate(repo, lfdirstate, lfile, True)

        lfdirstate.write()
        if printmessage and lfiles:
            ui.status(
                _('%d largefiles updated, %d removed\n') % (updated, removed))
    finally:
        wlock.release()
Ejemplo n.º 5
0
        def commit(self,
                   text="",
                   user=None,
                   date=None,
                   match=None,
                   force=False,
                   editor=False,
                   extra={}):
            orig = super(lfilesrepo, self).commit

            wlock = self.wlock()
            try:
                # Case 0: Automated committing
                #
                # While automated committing (like rebase, transplant
                # and so on), this code path is used to avoid:
                # (1) updating standins, because standins should
                #     be already updated at this point
                # (2) aborting when stadnins are matched by "match",
                #     because automated committing may specify them directly
                #
                if getattr(self, "_isrebasing", False) or \
                        getattr(self, "_istransplanting", False):
                    result = orig(text=text,
                                  user=user,
                                  date=date,
                                  match=match,
                                  force=force,
                                  editor=editor,
                                  extra=extra)

                    if result:
                        lfdirstate = lfutil.openlfdirstate(ui, self)
                        for f in self[result].files():
                            if lfutil.isstandin(f):
                                lfile = lfutil.splitstandin(f)
                                lfutil.synclfdirstate(self, lfdirstate, lfile,
                                                      False)
                        lfdirstate.write()

                    return result
                # Case 1: user calls commit with no specific files or
                # include/exclude patterns: refresh and commit all files that
                # are "dirty".
                if ((match is None)
                        or (not match.anypats() and not match.files())):
                    # Spend a bit of time here to get a list of files we know
                    # are modified so we can compare only against those.
                    # It can cost a lot of time (several seconds)
                    # otherwise to update all standins if the largefiles are
                    # large.
                    lfdirstate = lfutil.openlfdirstate(ui, self)
                    dirtymatch = match_.always(self.root, self.getcwd())
                    unsure, s = lfdirstate.status(dirtymatch, [], False, False,
                                                  False)
                    modifiedfiles = unsure + s.modified + s.added + s.removed
                    lfiles = lfutil.listlfiles(self)
                    # this only loops through largefiles that exist (not
                    # removed/renamed)
                    for lfile in lfiles:
                        if lfile in modifiedfiles:
                            if os.path.exists(self.wjoin(
                                    lfutil.standin(lfile))):
                                # this handles the case where a rebase is being
                                # performed and the working copy is not updated
                                # yet.
                                if os.path.exists(self.wjoin(lfile)):
                                    lfutil.updatestandin(
                                        self, lfutil.standin(lfile))
                                    lfdirstate.normal(lfile)

                    result = orig(text=text,
                                  user=user,
                                  date=date,
                                  match=match,
                                  force=force,
                                  editor=editor,
                                  extra=extra)

                    if result is not None:
                        for lfile in lfdirstate:
                            if lfile in modifiedfiles:
                                if (not os.path.exists(self.wjoin(
                                   lfutil.standin(lfile)))) or \
                                   (not os.path.exists(self.wjoin(lfile))):
                                    lfdirstate.drop(lfile)

                    # This needs to be after commit; otherwise precommit hooks
                    # get the wrong status
                    lfdirstate.write()
                    return result

                lfiles = lfutil.listlfiles(self)
                match._files = self._subdirlfs(match.files(), lfiles)

                # Case 2: user calls commit with specified patterns: refresh
                # any matching big files.
                smatcher = lfutil.composestandinmatcher(self, match)
                standins = self.dirstate.walk(smatcher, [], False, False)

                # No matching big files: get out of the way and pass control to
                # the usual commit() method.
                if not standins:
                    return orig(text=text,
                                user=user,
                                date=date,
                                match=match,
                                force=force,
                                editor=editor,
                                extra=extra)

                # Refresh all matching big files.  It's possible that the
                # commit will end up failing, in which case the big files will
                # stay refreshed.  No harm done: the user modified them and
                # asked to commit them, so sooner or later we're going to
                # refresh the standins.  Might as well leave them refreshed.
                lfdirstate = lfutil.openlfdirstate(ui, self)
                for standin in standins:
                    lfile = lfutil.splitstandin(standin)
                    if lfdirstate[lfile] != 'r':
                        lfutil.updatestandin(self, standin)
                        lfdirstate.normal(lfile)
                    else:
                        lfdirstate.drop(lfile)

                # Cook up a new matcher that only matches regular files or
                # standins corresponding to the big files requested by the
                # user.  Have to modify _files to prevent commit() from
                # complaining "not tracked" for big files.
                match = copy.copy(match)
                origmatchfn = match.matchfn

                # Check both the list of largefiles and the list of
                # standins because if a largefile was removed, it
                # won't be in the list of largefiles at this point
                match._files += sorted(standins)

                actualfiles = []
                for f in match._files:
                    fstandin = lfutil.standin(f)

                    # ignore known largefiles and standins
                    if f in lfiles or fstandin in standins:
                        continue

                    actualfiles.append(f)
                match._files = actualfiles

                def matchfn(f):
                    if origmatchfn(f):
                        return f not in lfiles
                    else:
                        return f in standins

                match.matchfn = matchfn
                result = orig(text=text,
                              user=user,
                              date=date,
                              match=match,
                              force=force,
                              editor=editor,
                              extra=extra)
                # This needs to be after commit; otherwise precommit hooks
                # get the wrong status
                lfdirstate.write()
                return result
            finally:
                wlock.release()
Ejemplo n.º 6
0
        def commit(self, text="", user=None, date=None, match=None, force=False, editor=False, extra={}):
            orig = super(lfilesrepo, self).commit

            wlock = self.wlock()
            try:
                # Case 0: Automated committing
                #
                # While automated committing (like rebase, transplant
                # and so on), this code path is used to avoid:
                # (1) updating standins, because standins should
                #     be already updated at this point
                # (2) aborting when stadnins are matched by "match",
                #     because automated committing may specify them directly
                #
                if getattr(self, "_isrebasing", False) or getattr(self, "_istransplanting", False):
                    result = orig(text=text, user=user, date=date, match=match, force=force, editor=editor, extra=extra)

                    if result:
                        lfdirstate = lfutil.openlfdirstate(ui, self)
                        for f in self[result].files():
                            if lfutil.isstandin(f):
                                lfile = lfutil.splitstandin(f)
                                lfutil.synclfdirstate(self, lfdirstate, lfile, False)
                        lfdirstate.write()

                    return result
                # Case 1: user calls commit with no specific files or
                # include/exclude patterns: refresh and commit all files that
                # are "dirty".
                if (match is None) or (not match.anypats() and not match.files()):
                    # Spend a bit of time here to get a list of files we know
                    # are modified so we can compare only against those.
                    # It can cost a lot of time (several seconds)
                    # otherwise to update all standins if the largefiles are
                    # large.
                    lfdirstate = lfutil.openlfdirstate(ui, self)
                    dirtymatch = match_.always(self.root, self.getcwd())
                    unsure, s = lfdirstate.status(dirtymatch, [], False, False, False)
                    modifiedfiles = unsure + s.modified + s.added + s.removed
                    lfiles = lfutil.listlfiles(self)
                    # this only loops through largefiles that exist (not
                    # removed/renamed)
                    for lfile in lfiles:
                        if lfile in modifiedfiles:
                            if os.path.exists(self.wjoin(lfutil.standin(lfile))):
                                # this handles the case where a rebase is being
                                # performed and the working copy is not updated
                                # yet.
                                if os.path.exists(self.wjoin(lfile)):
                                    lfutil.updatestandin(self, lfutil.standin(lfile))
                                    lfdirstate.normal(lfile)

                    result = orig(text=text, user=user, date=date, match=match, force=force, editor=editor, extra=extra)

                    if result is not None:
                        for lfile in lfdirstate:
                            if lfile in modifiedfiles:
                                if (not os.path.exists(self.wjoin(lfutil.standin(lfile)))) or (
                                    not os.path.exists(self.wjoin(lfile))
                                ):
                                    lfdirstate.drop(lfile)

                    # This needs to be after commit; otherwise precommit hooks
                    # get the wrong status
                    lfdirstate.write()
                    return result

                lfiles = lfutil.listlfiles(self)
                match._files = self._subdirlfs(match.files(), lfiles)

                # Case 2: user calls commit with specified patterns: refresh
                # any matching big files.
                smatcher = lfutil.composestandinmatcher(self, match)
                standins = self.dirstate.walk(smatcher, [], False, False)

                # No matching big files: get out of the way and pass control to
                # the usual commit() method.
                if not standins:
                    return orig(text=text, user=user, date=date, match=match, force=force, editor=editor, extra=extra)

                # Refresh all matching big files.  It's possible that the
                # commit will end up failing, in which case the big files will
                # stay refreshed.  No harm done: the user modified them and
                # asked to commit them, so sooner or later we're going to
                # refresh the standins.  Might as well leave them refreshed.
                lfdirstate = lfutil.openlfdirstate(ui, self)
                for standin in standins:
                    lfile = lfutil.splitstandin(standin)
                    if lfdirstate[lfile] != "r":
                        lfutil.updatestandin(self, standin)
                        lfdirstate.normal(lfile)
                    else:
                        lfdirstate.drop(lfile)

                # Cook up a new matcher that only matches regular files or
                # standins corresponding to the big files requested by the
                # user.  Have to modify _files to prevent commit() from
                # complaining "not tracked" for big files.
                match = copy.copy(match)
                origmatchfn = match.matchfn

                # Check both the list of largefiles and the list of
                # standins because if a largefile was removed, it
                # won't be in the list of largefiles at this point
                match._files += sorted(standins)

                actualfiles = []
                for f in match._files:
                    fstandin = lfutil.standin(f)

                    # ignore known largefiles and standins
                    if f in lfiles or fstandin in standins:
                        continue

                    actualfiles.append(f)
                match._files = actualfiles

                def matchfn(f):
                    if origmatchfn(f):
                        return f not in lfiles
                    else:
                        return f in standins

                match.matchfn = matchfn
                result = orig(text=text, user=user, date=date, match=match, force=force, editor=editor, extra=extra)
                # This needs to be after commit; otherwise precommit hooks
                # get the wrong status
                lfdirstate.write()
                return result
            finally:
                wlock.release()
Ejemplo n.º 7
0
def updatelfiles(ui,
                 repo,
                 filelist=None,
                 printmessage=None,
                 normallookup=False):
    '''Update largefiles according to standins in the working directory

    If ``printmessage`` is other than ``None``, it means "print (or
    ignore, for false) message forcibly".
    '''
    statuswriter = lfutil.getstatuswriter(ui, repo, printmessage)
    with repo.wlock():
        lfdirstate = lfutil.openlfdirstate(ui, repo)
        lfiles = set(lfutil.listlfiles(repo)) | set(lfdirstate)

        if filelist is not None:
            filelist = set(filelist)
            lfiles = [f for f in lfiles if f in filelist]

        update = {}
        updated, removed = 0, 0
        wvfs = repo.wvfs
        for lfile in lfiles:
            rellfile = lfile
            rellfileorig = os.path.relpath(scmutil.origpath(
                ui, repo, wvfs.join(rellfile)),
                                           start=repo.root)
            relstandin = lfutil.standin(lfile)
            relstandinorig = os.path.relpath(scmutil.origpath(
                ui, repo, wvfs.join(relstandin)),
                                             start=repo.root)
            if wvfs.exists(relstandin):
                if (wvfs.exists(relstandinorig) and wvfs.exists(rellfile)):
                    shutil.copyfile(wvfs.join(rellfile),
                                    wvfs.join(rellfileorig))
                    wvfs.unlinkpath(relstandinorig)
                expecthash = lfutil.readstandin(repo, lfile)
                if expecthash != '':
                    if lfile not in repo[None]:  # not switched to normal file
                        wvfs.unlinkpath(rellfile, ignoremissing=True)
                    # use normallookup() to allocate an entry in largefiles
                    # dirstate to prevent lfilesrepo.status() from reporting
                    # missing files as removed.
                    lfdirstate.normallookup(lfile)
                    update[lfile] = expecthash
            else:
                # Remove lfiles for which the standin is deleted, unless the
                # lfile is added to the repository again. This happens when a
                # largefile is converted back to a normal file: the standin
                # disappears, but a new (normal) file appears as the lfile.
                if (wvfs.exists(rellfile)
                        and repo.dirstate.normalize(lfile) not in repo[None]):
                    wvfs.unlinkpath(rellfile)
                    removed += 1

        # largefile processing might be slow and be interrupted - be prepared
        lfdirstate.write()

        if lfiles:
            statuswriter(_('getting changed largefiles\n'))
            cachelfiles(ui, repo, None, lfiles)

        for lfile in lfiles:
            update1 = 0

            expecthash = update.get(lfile)
            if expecthash:
                if not lfutil.copyfromcache(repo, expecthash, lfile):
                    # failed ... but already removed and set to normallookup
                    continue
                # Synchronize largefile dirstate to the last modified
                # time of the file
                lfdirstate.normal(lfile)
                update1 = 1

            # copy the state of largefile standin from the repository's
            # dirstate to its state in the lfdirstate.
            rellfile = lfile
            relstandin = lfutil.standin(lfile)
            if wvfs.exists(relstandin):
                mode = wvfs.stat(relstandin).st_mode
                if mode != wvfs.stat(rellfile).st_mode:
                    wvfs.chmod(rellfile, mode)
                    update1 = 1

            updated += update1

            lfutil.synclfdirstate(repo, lfdirstate, lfile, normallookup)

        lfdirstate.write()
        if lfiles:
            statuswriter(
                _('%d largefiles updated, %d removed\n') % (updated, removed))