def __init__(self, options):
gr.hier_block2.__init__(self, "transmit_path",
gr.io_signature(0, 0, 0),
gr.io_signature(2, 2, gr.sizeof_gr_complex))
common_options.defaults(options)
config = self.config = station_configuration()
config.data_subcarriers = options.subcarriers
config.cp_length = options.cp_length
config.frame_data_blocks = options.data_blocks
config._verbose = options.verbose
config.fft_length = options.fft_length
config.training_data = default_block_header(config.data_subcarriers,
config.fft_length, options)
config.tx_station_id = options.station_id
config.coding = options.coding
if config.tx_station_id is None:
raise SystemError, "Station ID not set"
config.frame_id_blocks = 1 # FIXME
# digital rms amplitude sent to USRP
rms_amp = options.rms_amplitude
self._options = copy.copy(options)
self.servants = [] # FIXME
config.block_length = config.fft_length + config.cp_length
config.frame_data_part = config.frame_data_blocks + config.frame_id_blocks
config.frame_length = config.frame_data_part + \
config.training_data.no_pilotsyms
config.subcarriers = config.data_subcarriers + \
config.training_data.pilot_subcarriers
config.virtual_subcarriers = config.fft_length - config.subcarriers
# default values if parameters not set
if rms_amp is None:
rms_amp = math.sqrt(config.subcarriers)
config.rms_amplitude = rms_amp
# check some bounds
if config.fft_length < config.subcarriers:
raise SystemError, "Subcarrier number must be less than FFT length"
if config.fft_length < config.cp_length:
raise SystemError, "Cyclic prefix length must be less than FFT length"
## shortcuts
blen = config.block_length
flen = config.frame_length
dsubc = config.data_subcarriers
vsubc = config.virtual_subcarriers
# ------------------------------------------------------------------------ #
# Adaptive Transmitter Concept
used_id_bits = config.used_id_bits = 8 #TODO: no constant in source code
rep_id_bits = config.rep_id_bits = config.data_subcarriers / used_id_bits #BPSK
if config.data_subcarriers % used_id_bits <> 0:
raise SystemError, "Data subcarriers need to be multiple of %d" % (
used_id_bits)
## Control Part
if options.debug:
self._control = ctrl = static_tx_control(options)
print "Statix TX Control used"
else:
self._control = ctrl = corba_tx_control(options)
print "CORBA TX Control used"
id_src = (ctrl, 0)
mux_src = (ctrl, 1)
map_src = self._map_src = (ctrl, 2)
pa_src = (ctrl, 3)
if options.log:
id_src_f = gr.short_to_float()
self.connect(id_src, id_src_f)
log_to_file(self, id_src_f, "data/id_src_out.float")
mux_src_f = gr.short_to_float()
self.connect(mux_src, mux_src_f)
log_to_file(self, mux_src_f, "data/mux_src_out.float")
map_src_s = blocks.vector_to_stream(gr.sizeof_char,
config.data_subcarriers)
map_src_f = gr.char_to_float()
self.connect(map_src, map_src_s, map_src_f)
##log_to_file(self, map_src_f, "data/map_src.float")
##log_to_file(self, pa_src, "data/pa_src_out.float")
## Workaround to avoid periodic structure
seed(1)
whitener_pn = [
randint(0, 1) for i in range(used_id_bits * rep_id_bits)
]
## ID Encoder
id_enc = self._id_encoder = repetition_encoder_sb(
used_id_bits, rep_id_bits, whitener_pn)
self.connect(id_src, id_enc)
if options.log:
id_enc_f = gr.char_to_float()
self.connect(id_enc, id_enc_f)
log_to_file(self, id_enc_f, "data/id_enc_out.float")
## Bitmap Update Trigger
# TODO
#bmaptrig_stream = concatenate([[1, 2],[0]*(config.frame_data_part-7)])
bmaptrig_stream = concatenate([[1, 1],
[0] * (config.frame_data_part - 2)])
print "bmaptrig_stream = ", bmaptrig_stream
btrig = self._bitmap_trigger = blocks.vector_source_b(
bmaptrig_stream.tolist(), True)
if options.log:
log_to_file(self, btrig, "data/bitmap_trig.char")
## Bitmap Update Trigger for puncturing
# TODO
if not options.nopunct:
#bmaptrig_stream_puncturing = concatenate([[1],[0]*(config.frame_data_part-2)])
bmaptrig_stream_puncturing = concatenate(
[[1], [0] * (config.frame_data_blocks / 2 - 1)])
btrig_puncturing = self._bitmap_trigger_puncturing = blocks.vector_source_b(
bmaptrig_stream_puncturing.tolist(), True)
bmapsrc_stream_puncturing = concatenate([[1] * dsubc, [2] * dsubc])
bsrc_puncturing = self._bitmap_src_puncturing = blocks.vector_source_b(
bmapsrc_stream_puncturing.tolist(), True, dsubc)
if options.log and options.coding and not options.nopunct:
log_to_file(self, btrig_puncturing,
"data/bitmap_trig_puncturing.char")
## Frame Trigger
# TODO
ftrig_stream = concatenate([[1], [0] * (config.frame_data_part - 1)])
ftrig = self._frame_trigger = blocks.vector_source_b(
ftrig_stream.tolist(), True)
## Data Multiplexer
# Input 0: control stream
# Input 1: encoded ID stream
# Inputs 2..n: data streams
dmux = self._data_multiplexer = stream_controlled_mux_b()
self.connect(mux_src, (dmux, 0))
self.connect(id_enc, (dmux, 1))
self._data_multiplexer_nextport = 2
if options.log:
dmux_f = gr.char_to_float()
self.connect(dmux, dmux_f)
log_to_file(self, dmux_f, "data/dmux_out.float")
## Modulator
mod = self._modulator = generic_mapper_bcv(config.data_subcarriers,
options.coding)
self.connect(dmux, (mod, 0))
self.connect(map_src, (mod, 1))
self.connect(btrig, (mod, 2))
if options.log:
log_to_file(self, mod, "data/mod_out.compl")
modi = gr.complex_to_imag(config.data_subcarriers)
modr = gr.complex_to_real(config.data_subcarriers)
self.connect(mod, modi)
self.connect(mod, modr)
log_to_file(self, modi, "data/mod_imag_out.float")
log_to_file(self, modr, "data/mod_real_out.float")
## Power allocator
if options.debug:
## static
pa = self._power_allocator = power_allocator(
config.data_subcarriers)
self.connect(mod, (pa, 0))
self.connect(pa_src, (pa, 1))
else:
## with CORBA control event channel
ns_ip = ctrl.ns_ip
ns_port = ctrl.ns_port
evchan = ctrl.evchan
pa = self._power_allocator = corba_power_allocator(dsubc, \
evchan, ns_ip, ns_port, True)
self.connect(mod, (pa, 0))
self.connect(id_src, (pa, 1))
self.connect(ftrig, (pa, 2))
if options.log:
log_to_file(self, pa, "data/pa_out.compl")
## Pilot subcarriers
psubc = self._pilot_subcarrier_inserter = pilot_subcarrier_inserter()
self.connect(pa, psubc)
pilot_subc = config.training_data.shifted_pilot_tones
print "pilot_subc", pilot_subc
stc = stc_encoder(config.subcarriers, config.frame_data_blocks,
pilot_subc)
self.connect(psubc, stc)
if options.log:
log_to_file(self, psubc, "data/psubc_out.compl")
log_to_file(self, psubc_2, "data/psubc2_out.compl")
log_to_file(self, pa, "data/pa.compl")
log_to_file(self, (stc, 0), "data/stc_0.compl")
log_to_file(self, (stc, 1), "data/stc_1.compl")
## Add virtual subcarriers
if config.fft_length > config.subcarriers:
vsubc = self._virtual_subcarrier_extender = \
vector_padding(config.subcarriers, config.fft_length)
self.connect(stc, vsubc)
vsubc_2 = self._virtual_subcarrier_extender_2 = \
vector_padding(config.subcarriers, config.fft_length)
self.connect((stc, 1), vsubc_2)
else:
vsubc = self._virtual_subcarrier_extender = psubc
vsubc_2 = self._virtual_subcarrier_extender_2 = psubc_2
log_to_file(self, psubc, "data/psubc.compl")
log_to_file(self, stc, "data/stc1.compl")
log_to_file(self, (stc, 1), "data/stc2.compl")
if options.log:
log_to_file(self, vsubc, "data/vsubc_out.compl")
log_to_file(self, vsubc_2, "data/vsubc2_out.compl")
## IFFT, no window, block shift
ifft = self._ifft = fft_blocks.fft_vcc(config.fft_length, False, [],
True)
self.connect(vsubc, ifft)
ifft_2 = self._ifft_2 = fft_blocks.fft_vcc(config.fft_length, False,
[], True)
self.connect(vsubc_2, ifft_2)
if options.log:
log_to_file(self, ifft, "data/ifft_out.compl")
log_to_file(self, ifft_2, "data/ifft2_out.compl")
## Pilot blocks (preambles)
pblocks = self._pilot_block_inserter = pilot_block_inserter(1, False)
self.connect(ifft, pblocks)
pblocks_2 = self._pilot_block_inserter_2 = pilot_block_inserter(
2, False)
self.connect(ifft_2, pblocks_2)
if options.log:
log_to_file(self, pblocks, "data/pilot_block_ins_out.compl")
log_to_file(self, pblocks_2, "data/pilot_block_ins2_out.compl")
## Cyclic Prefix
cp = self._cyclic_prefixer = cyclic_prefixer(config.fft_length,
config.block_length)
self.connect(pblocks, cp)
cp_2 = self._cyclic_prefixer_2 = cyclic_prefixer(
config.fft_length, config.block_length)
self.connect(pblocks_2, cp_2)
lastblock = cp
lastblock_2 = cp_2
if options.log:
log_to_file(self, cp, "data/cp_out.compl")
log_to_file(self, cp_2, "data/cp2_out.compl")
if options.cheat:
## Artificial Channel
# kept to compare with previous system
achan_ir = concatenate([[1.0], [0.0] * (config.cp_length - 1)])
achan = self._artificial_channel = gr.fir_filter_ccc(1, achan_ir)
self.connect(lastblock, achan)
lastblock = achan
achan_2 = self._artificial_channel_2 = gr.fir_filter_ccc(
1, achan_ir)
self.connect(lastblock_2, achan_2)
lastblock_2 = achan_2
## Digital Amplifier
amp = self._amplifier = ofdm.multiply_const_ccf(1.0 / math.sqrt(2))
self.connect(lastblock, amp)
amp_2 = self._amplifier_2 = ofdm.multiply_const_ccf(1.0 / math.sqrt(2))
self.connect(lastblock_2, amp_2)
self.set_rms_amplitude(rms_amp)
if options.log:
log_to_file(self, amp, "data/amp_tx_out.compl")
log_to_file(self, amp_2, "data/amp_tx2_out.compl")
## Setup Output
self.connect(amp, (self, 0))
self.connect(amp_2, (self, 1))
# ------------------------------------------------------------------------ #
# Display some information about the setup
if config._verbose:
self._print_verbage()
def __init__(self,
M=1024,
K=4,
qam_size=16,
syms_per_frame=10,
carriers=924,
theta_sel=0,
exclude_preamble=0,
sel_preamble=0,
zero_pads=1,
extra_pad=False):
gr.hier_block2.__init__(
self,
"fbmc_transmitter_demo",
gr.io_signature(1, 1, gr.sizeof_gr_complex * M),
gr.io_signature(1, 1, gr.sizeof_gr_complex * 1),
)
##################################################
# Parameters
##################################################
self.syms_per_frame = syms_per_frame
self.qam_size = qam_size
self.K = K
self.M = M
self.exclude_preamble = exclude_preamble
self.theta_sel = theta_sel
self.zero_pads = zero_pads
##################################################
# Variables
##################################################
# Assertions
assert (M > 0 and K > 0
and qam_size > 0), "M, K and qam_size should be bigger than 0"
assert ((math.log(M) / math.log(2)) == int(
math.log(M) / math.log(2))), "M shouldbe a power of 2"
assert (K == 4), "for now only K=4 s supported."
assert (qam_size == 4 or qam_size == 16 or qam_size == 64
or qam_size == 256
), "Only 4-,16-,64-,256-qam constellations are supported."
assert (theta_sel == 0 or theta_sel == 1)
assert (exclude_preamble == 0 or exclude_preamble == 1)
##################################################
# Blocks
##################################################
self.fft_vxx_0_0 = fft.fft_vcc(M, False, (), True, 1)
self.blocks_multiply_const_vxx_0 = blocks.multiply_const_vcc(
([1.0 / (M * 0.6863)] * M))
# self.fbmc_symbol_creation_bvc_0 = ofdm.fbmc_symbol_creation_bvc(carriers, qam_size)
self.vector_padding_0 = ofdm.vector_padding(carriers, M, -1)
self.fbmc_separate_vcvc_0 = ofdm.fbmc_separate_vcvc(M, 2)
self.fbmc_polyphase_network_vcvc_0_0 = ofdm.fbmc_polyphase_network_vcvc(
M, K, K * M - 1, False)
self.fbmc_polyphase_network_vcvc_0 = ofdm.fbmc_polyphase_network_vcvc(
M, K, K * M - 1, False)
self.fbmc_overlapping_parallel_to_serial_vcc_0 = ofdm.fbmc_overlapping_parallel_to_serial_vcc(
M)
self.fbmc_oqam_preprocessing_vcvc_0 = ofdm.fbmc_oqam_preprocessing_vcvc(
M, 0, theta_sel)
self.fbmc_insert_preamble_vcvc_0 = ofdm.fbmc_insert_preamble_vcvc(
M, syms_per_frame, sel_preamble, zero_pads, extra_pad)
self.fbmc_beta_multiplier_vcvc_0 = ofdm.fbmc_beta_multiplier_vcvc(
M, K, K * M - 1, 0)
self.blks2_selector_0 = grc_blks2.selector(
item_size=gr.sizeof_gr_complex * M,
num_inputs=2,
num_outputs=1,
input_index=exclude_preamble,
output_index=0,
)
##################################################
# Connections
##################################################
self.connect((self, 0), (self.vector_padding_0, 0))
self.connect((self.vector_padding_0, 0),
(self.fbmc_oqam_preprocessing_vcvc_0, 0))
# self.connect(, (self.fbmc_symbol_creation_bvc_0, 0))
self.connect((self.fbmc_beta_multiplier_vcvc_0, 0),
(self.fft_vxx_0_0, 0))
self.connect((self.fft_vxx_0_0, 0),
(self.blocks_multiply_const_vxx_0, 0))
self.connect((self.blocks_multiply_const_vxx_0, 0),
(self.fbmc_separate_vcvc_0, 0))
self.connect((self.fbmc_polyphase_network_vcvc_0, 0),
(self.fbmc_overlapping_parallel_to_serial_vcc_0, 0))
self.connect((self.fbmc_polyphase_network_vcvc_0_0, 0),
(self.fbmc_overlapping_parallel_to_serial_vcc_0, 1))
self.connect((self.fbmc_separate_vcvc_0, 1),
(self.fbmc_polyphase_network_vcvc_0_0, 0))
self.connect((self.fbmc_separate_vcvc_0, 0),
(self.fbmc_polyphase_network_vcvc_0, 0))
self.connect((self.fbmc_overlapping_parallel_to_serial_vcc_0, 0),
(self, 0))
self.connect((self.fbmc_oqam_preprocessing_vcvc_0, 0),
(self.blks2_selector_0, 1))
self.connect((self.fbmc_oqam_preprocessing_vcvc_0, 0),
(self.fbmc_insert_preamble_vcvc_0, 0))
self.connect((self.fbmc_insert_preamble_vcvc_0, 0),
(self.blks2_selector_0, 0))
self.connect((self.blks2_selector_0, 0),
(self.fbmc_beta_multiplier_vcvc_0, 0))
def __init__(self, M=1024, K=4, qam_size=16, syms_per_frame=10, carriers=924, theta_sel=0, exclude_preamble=0, sel_preamble=0, zero_pads=1, extra_pad=False):
gr.hier_block2.__init__(self,
"fbmc_transmitter_demo",
gr.io_signature(1, 1, gr.sizeof_gr_complex*M),
gr.io_signature(1, 1, gr.sizeof_gr_complex*1),
)
##################################################
# Parameters
##################################################
self.syms_per_frame = syms_per_frame
self.qam_size = qam_size
self.K = K
self.M = M
self.exclude_preamble = exclude_preamble
self.theta_sel = theta_sel
self.zero_pads = zero_pads
##################################################
# Variables
##################################################
# Assertions
assert(M>0 and K>0 and qam_size>0), "M, K and qam_size should be bigger than 0"
assert((math.log(M)/math.log(2))==int(math.log(M)/math.log(2))), "M shouldbe a power of 2"
assert(K==4), "for now only K=4 s supported."
assert(qam_size==4 or qam_size==16 or qam_size==64 or qam_size==256 ), "Only 4-,16-,64-,256-qam constellations are supported."
assert(theta_sel==0 or theta_sel==1)
assert(exclude_preamble==0 or exclude_preamble==1)
##################################################
# Blocks
##################################################
self.fft_vxx_0_0 = fft.fft_vcc(M, False, (), True, 1)
self.blocks_multiply_const_vxx_0 = blocks.multiply_const_vcc(([1.0/(M*0.6863)]*M))
# self.fbmc_symbol_creation_bvc_0 = ofdm.fbmc_symbol_creation_bvc(carriers, qam_size)
self.vector_padding_0 = ofdm.vector_padding(carriers,M,-1)
self.fbmc_separate_vcvc_0 = ofdm.fbmc_separate_vcvc(M, 2)
self.fbmc_polyphase_network_vcvc_0_0 = ofdm.fbmc_polyphase_network_vcvc(M, K, K*M-1, False)
self.fbmc_polyphase_network_vcvc_0 = ofdm.fbmc_polyphase_network_vcvc(M, K, K*M-1, False)
self.fbmc_overlapping_parallel_to_serial_vcc_0 = ofdm.fbmc_overlapping_parallel_to_serial_vcc(M)
self.fbmc_oqam_preprocessing_vcvc_0 = ofdm.fbmc_oqam_preprocessing_vcvc(M, 0, theta_sel)
self.fbmc_insert_preamble_vcvc_0 = ofdm.fbmc_insert_preamble_vcvc(M, syms_per_frame, sel_preamble, zero_pads,extra_pad)
self.fbmc_beta_multiplier_vcvc_0 = ofdm.fbmc_beta_multiplier_vcvc(M, K, K*M-1, 0)
self.blks2_selector_0 = grc_blks2.selector(
item_size=gr.sizeof_gr_complex*M,
num_inputs=2,
num_outputs=1,
input_index=exclude_preamble,
output_index=0,
)
##################################################
# Connections
##################################################
self.connect((self, 0), (self.vector_padding_0,0))
self.connect((self.vector_padding_0,0),(self.fbmc_oqam_preprocessing_vcvc_0, 0))
# self.connect(, (self.fbmc_symbol_creation_bvc_0, 0))
self.connect((self.fbmc_beta_multiplier_vcvc_0, 0), (self.fft_vxx_0_0, 0))
self.connect((self.fft_vxx_0_0, 0), (self.blocks_multiply_const_vxx_0,0))
self.connect((self.blocks_multiply_const_vxx_0,0), (self.fbmc_separate_vcvc_0, 0))
self.connect((self.fbmc_polyphase_network_vcvc_0, 0), (self.fbmc_overlapping_parallel_to_serial_vcc_0, 0))
self.connect((self.fbmc_polyphase_network_vcvc_0_0, 0), (self.fbmc_overlapping_parallel_to_serial_vcc_0, 1))
self.connect((self.fbmc_separate_vcvc_0, 1), (self.fbmc_polyphase_network_vcvc_0_0, 0))
self.connect((self.fbmc_separate_vcvc_0, 0), (self.fbmc_polyphase_network_vcvc_0, 0))
self.connect((self.fbmc_overlapping_parallel_to_serial_vcc_0, 0), (self, 0))
self.connect((self.fbmc_oqam_preprocessing_vcvc_0, 0), (self.blks2_selector_0, 1))
self.connect((self.fbmc_oqam_preprocessing_vcvc_0, 0), (self.fbmc_insert_preamble_vcvc_0, 0))
self.connect((self.fbmc_insert_preamble_vcvc_0, 0), (self.blks2_selector_0, 0))
self.connect((self.blks2_selector_0, 0), (self.fbmc_beta_multiplier_vcvc_0, 0))
def __init__(self):
gr.top_block.__init__(self, "Top Block")
Qt.QWidget.__init__(self)
self.setWindowTitle("Top Block")
try:
self.setWindowIcon(Qt.QIcon.fromTheme('gnuradio-grc'))
except:
pass
self.top_scroll_layout = Qt.QVBoxLayout()
self.setLayout(self.top_scroll_layout)
self.top_scroll = Qt.QScrollArea()
self.top_scroll.setFrameStyle(Qt.QFrame.NoFrame)
self.top_scroll_layout.addWidget(self.top_scroll)
self.top_scroll.setWidgetResizable(True)
self.top_widget = Qt.QWidget()
self.top_scroll.setWidget(self.top_widget)
self.top_layout = Qt.QVBoxLayout(self.top_widget)
self.top_grid_layout = Qt.QGridLayout()
self.top_layout.addLayout(self.top_grid_layout)
self.settings = Qt.QSettings("GNU Radio", "top_block")
self.restoreGeometry(self.settings.value("geometry").toByteArray())
##################################################
# Variables
##################################################
self.used_id_bits = used_id_bits = 8
self.subcarriers = subcarriers = 208
self.id_blocks = id_blocks = 1
self.fft_length = fft_length = 256
self.fbmc = fbmc = 1
self.estimation_preamble = estimation_preamble = 0
self.data_blocks = data_blocks = 10
self.training_data = training_data = default_block_header(subcarriers,fft_length,fbmc,estimation_preamble,[])
self.repeated_id_bits = repeated_id_bits = subcarriers/used_id_bits
self.data_part = data_part = data_blocks + id_blocks
self.whitener_seed = whitener_seed = seed(1)
self.whitener_pn = whitener_pn = [randint(0,1) for i in range(used_id_bits*repeated_id_bits)]
self.variable_function_probe_2 = variable_function_probe_2 = 0
self.variable_function_probe_1 = variable_function_probe_1 = 0
self.variable_function_probe_0 = variable_function_probe_0 = 0
self.tx_hostname = tx_hostname = "localhost"
self.samp_rate = samp_rate = 4*250000
self.interleaver = interleaver = trellis.interleaver(2000,666)
self.frame_length = frame_length = 2*data_part + training_data.fbmc_no_preambles
self.filter_length = filter_length = 4
self.disable_freq_sync = disable_freq_sync = 1
self.coding = coding = 1
self.chunkdivisor = chunkdivisor = int(numpy.ceil(data_blocks/5.0))
self.ber_window = ber_window = 100000
self.amplitude = amplitude = 1
self.SNR = SNR = 40
##################################################
# Blocks
##################################################
self._amplitude_layout = Qt.QVBoxLayout()
self._amplitude_tool_bar = Qt.QToolBar(self)
self._amplitude_layout.addWidget(self._amplitude_tool_bar)
self._amplitude_tool_bar.addWidget(Qt.QLabel("amplitude"+": "))
class qwt_counter_pyslot(Qwt.QwtCounter):
def __init__(self, parent=None):
Qwt.QwtCounter.__init__(self, parent)
@pyqtSlot('double')
def setValue(self, value):
super(Qwt.QwtCounter, self).setValue(value)
self._amplitude_counter = qwt_counter_pyslot()
self._amplitude_counter.setRange(0, 1, 0.02)
self._amplitude_counter.setNumButtons(2)
self._amplitude_counter.setValue(self.amplitude)
self._amplitude_tool_bar.addWidget(self._amplitude_counter)
self._amplitude_counter.valueChanged.connect(self.set_amplitude)
self._amplitude_slider = Qwt.QwtSlider(None, Qt.Qt.Horizontal, Qwt.QwtSlider.BottomScale, Qwt.QwtSlider.BgSlot)
self._amplitude_slider.setRange(0, 1, 0.02)
self._amplitude_slider.setValue(self.amplitude)
self._amplitude_slider.setMinimumWidth(200)
self._amplitude_slider.valueChanged.connect(self.set_amplitude)
self._amplitude_layout.addWidget(self._amplitude_slider)
self.top_layout.addLayout(self._amplitude_layout)
self.tx_rpc_manager_0 = tx_rpc_manager(fft_length, subcarriers, data_blocks, frame_length, 0, 0.0, samp_rate)
self.tigr_transmit_control_0 = tigr_transmit_control(
subcarriers=subcarriers,
fft_length=fft_length,
used_id_bits=used_id_bits,
estimation_preamble=estimation_preamble,
filter_length=filter_length,
fbmc=fbmc,
data_blocks=data_blocks,
data_part=data_part,
repeated_id_bits=repeated_id_bits,
coding=coding,
)
self.tigr_scatterplot_0 = tigr_scatterplot(
subcarriers=subcarriers,
fbmc=fbmc,
fft_length=fft_length,
estimation_preamble=estimation_preamble,
data_blocks=data_blocks,
data_part=11,
frame_length=frame_length,
)
self.rx_rpc_manager_0 = rx_rpc_manager()
self.rms = fbmc_rms_amplifier(amplitude, subcarriers)
self.zeromq_pub_sink_1 = zeromq.pub_sink(gr.sizeof_float, subcarriers, "tcp://*:5559", 100)
self.zeromq_pub_sink_0 = zeromq.pub_sink(gr.sizeof_float, 1, "tcp://*:5557", 100)
def _variable_function_probe_2_probe():
while True:
val = self.rx_rpc_manager_0.add_set_scatter_subcarrier_interface(self.tigr_scatterplot_0.ofdm_vector_element_0.set_element)
try:
self.set_variable_function_probe_2(val)
except AttributeError:
pass
time.sleep(1.0 / (0.000000001))
_variable_function_probe_2_thread = threading.Thread(target=_variable_function_probe_2_probe)
_variable_function_probe_2_thread.daemon = True
_variable_function_probe_2_thread.start()
def _variable_function_probe_1_probe():
while True:
val = self.tx_rpc_manager_0.add_tx_modulation_interface(self.tigr_transmit_control_0.ofdm_allocation_src_0.set_allocation)
try:
self.set_variable_function_probe_1(val)
except AttributeError:
pass
time.sleep(1.0 / (0.000000001))
_variable_function_probe_1_thread = threading.Thread(target=_variable_function_probe_1_probe)
_variable_function_probe_1_thread.daemon = True
_variable_function_probe_1_thread.start()
def _variable_function_probe_0_probe():
while True:
val = self.tx_rpc_manager_0.add_tx_ampl_interface(self.rms.set_rms_amplitude)
try:
self.set_variable_function_probe_0(val)
except AttributeError:
pass
time.sleep(1.0 / (0.000000001))
_variable_function_probe_0_thread = threading.Thread(target=_variable_function_probe_0_probe)
_variable_function_probe_0_thread.daemon = True
_variable_function_probe_0_thread.start()
self.trellis_permutation_0 = trellis.permutation(interleaver.K(), (interleaver.DEINTER()), 1, gr.sizeof_float*1)
self.tigr_fbmc_snr_estimator_0 = tigr_fbmc_snr_estimator(
subcarriers=subcarriers,
fbmc=fbmc,
fft_length=fft_length,
estimation_preamble=estimation_preamble,
frame_length=frame_length,
)
self.tigr_fbmc_inner_receiver_0 = tigr_fbmc_inner_receiver(
subcarriers=subcarriers,
fft_length=fft_length,
data_blocks=data_blocks,
estimation_preamble=estimation_preamble,
filter_length=filter_length,
frame_length=frame_length,
disable_freq_sync=disable_freq_sync,
)
self.tigr_ber_measurement_0 = tigr_ber_measurement(
subcarriers=subcarriers,
fbmc=fbmc,
fft_length=fft_length,
estimation_preamble=estimation_preamble,
ber_window=ber_window,
data_blocks=data_blocks,
)
self.single_pole_iir_filter_xx_0 = filter.single_pole_iir_filter_ff(0.1, subcarriers)
self.ofdm_viterbi_combined_fb_0 = ofdm.viterbi_combined_fb(ofdm.fsm(ofdm.fsm(1,2,[91,121])), subcarriers, -1, -1, 2, chunkdivisor, ([-1,-1,-1,1,1,-1,1,1]), ofdm.TRELLIS_EUCLIDEAN)
self.ofdm_vector_sampler_0 = ofdm.vector_sampler(gr.sizeof_gr_complex*subcarriers, 1)
self.ofdm_vector_padding_0 = ofdm.vector_padding(subcarriers, fft_length, -1)
self.ofdm_multiply_frame_fc_0 = ofdm.multiply_frame_fc(data_part, subcarriers)
self.ofdm_multiply_const_ii_0 = ofdm.multiply_const_ii(1./int(numpy.ceil(data_blocks/5.0)))
self.ofdm_generic_softdemapper_vcf_0 = ofdm.generic_softdemapper_vcf(subcarriers, data_part, 1)
self.ofdm_fbmc_separate_vcvc_1 = ofdm.fbmc_separate_vcvc(fft_length, 2)
self.ofdm_fbmc_polyphase_network_vcvc_1 = ofdm.fbmc_polyphase_network_vcvc(fft_length, filter_length, filter_length*fft_length-1, False)
self.ofdm_fbmc_polyphase_network_vcvc_0 = ofdm.fbmc_polyphase_network_vcvc(fft_length, filter_length, filter_length*fft_length-1, False)
self.ofdm_fbmc_pilot_block_inserter_0 = fbmc_pilot_block_inserter(subcarriers, data_part, training_data, 5)
self.ofdm_fbmc_pilot_block_filter_0 = fbmc_pilot_block_filter(subcarriers, frame_length, data_part, training_data)
self.ofdm_fbmc_overlapping_parallel_to_serial_vcc_0 = ofdm.fbmc_overlapping_parallel_to_serial_vcc(fft_length)
self.ofdm_fbmc_oqam_preprocessing_vcvc_0 = ofdm.fbmc_oqam_preprocessing_vcvc(subcarriers, 0, 0)
self.ofdm_fbmc_frame_sampler_0 = fbmc_frame_sampler(subcarriers, frame_length, data_part, training_data)
self.ofdm_fbmc_beta_multiplier_vcvc_0 = ofdm.fbmc_beta_multiplier_vcvc(fft_length, filter_length, fft_length*fft_length-1, 0)
self.ofdm_dynamic_trigger_ib_0 = ofdm.dynamic_trigger_ib(0)
self.ofdm_depuncture_ff_0 = ofdm.depuncture_ff(subcarriers, 0)
self.ofdm_coded_bpsk_soft_decoder_0 = ofdm.coded_bpsk_soft_decoder(subcarriers, used_id_bits, (whitener_pn))
self.ofdm_allocation_buffer_0 = ofdm.allocation_buffer(subcarriers, data_blocks, "tcp://"+tx_hostname+":3333", 1)
self.fft_vxx_1 = fft.fft_vcc(fft_length, False, ([]), True, 1)
self.channels_channel_model_0 = channels.channel_model(
noise_voltage=math.sqrt(1.0*fft_length/subcarriers)*math.sqrt(0.5)*10**(-SNR/20.0),
frequency_offset=0.0/fft_length,
epsilon=1,
taps=((1.0 ), ),
noise_seed=0,
block_tags=False
)
self.blocks_vector_source_x_0 = blocks.vector_source_b([1] + [0]*(data_blocks/2-1), True, 1, [])
self.blocks_throttle_0 = blocks.throttle(gr.sizeof_gr_complex*1, samp_rate,True)
self.blocks_keep_one_in_n_1 = blocks.keep_one_in_n(gr.sizeof_float*subcarriers, 20)
self.blks2_selector_0 = grc_blks2.selector(
item_size=gr.sizeof_float*1,
num_inputs=2,
num_outputs=1,
input_index=0,
output_index=0,
)
##################################################
# Connections
##################################################
self.connect((self.ofdm_fbmc_polyphase_network_vcvc_0, 0), (self.ofdm_fbmc_overlapping_parallel_to_serial_vcc_0, 0))
self.connect((self.ofdm_fbmc_polyphase_network_vcvc_1, 0), (self.ofdm_fbmc_overlapping_parallel_to_serial_vcc_0, 1))
self.connect((self.ofdm_fbmc_separate_vcvc_1, 1), (self.ofdm_fbmc_polyphase_network_vcvc_1, 0))
self.connect((self.ofdm_fbmc_oqam_preprocessing_vcvc_0, 0), (self.ofdm_fbmc_pilot_block_inserter_0, 0))
self.connect((self.ofdm_fbmc_pilot_block_inserter_0, 0), (self.ofdm_vector_padding_0, 0))
self.connect((self.ofdm_fbmc_beta_multiplier_vcvc_0, 0), (self.fft_vxx_1, 0))
self.connect((self.fft_vxx_1, 0), (self.ofdm_fbmc_separate_vcvc_1, 0))
self.connect((self.tigr_transmit_control_0, 0), (self.ofdm_fbmc_oqam_preprocessing_vcvc_0, 0))
self.connect((self.single_pole_iir_filter_xx_0, 0), (self.blocks_keep_one_in_n_1, 0))
self.connect((self.ofdm_fbmc_frame_sampler_0, 1), (self.ofdm_fbmc_pilot_block_filter_0, 1))
self.connect((self.ofdm_fbmc_frame_sampler_0, 0), (self.ofdm_fbmc_pilot_block_filter_0, 0))
self.connect((self.ofdm_fbmc_pilot_block_filter_0, 1), (self.ofdm_vector_sampler_0, 1))
self.connect((self.ofdm_vector_sampler_0, 0), (self.ofdm_coded_bpsk_soft_decoder_0, 0))
self.connect((self.ofdm_coded_bpsk_soft_decoder_0, 0), (self.ofdm_allocation_buffer_0, 0))
self.connect((self.ofdm_allocation_buffer_0, 1), (self.ofdm_generic_softdemapper_vcf_0, 1))
self.connect((self.single_pole_iir_filter_xx_0, 0), (self.ofdm_generic_softdemapper_vcf_0, 2))
self.connect((self.ofdm_generic_softdemapper_vcf_0, 0), (self.trellis_permutation_0, 0))
self.connect((self.ofdm_depuncture_ff_0, 0), (self.ofdm_viterbi_combined_fb_0, 0))
self.connect((self.ofdm_allocation_buffer_0, 1), (self.ofdm_depuncture_ff_0, 1))
self.connect((self.blocks_vector_source_x_0, 0), (self.ofdm_depuncture_ff_0, 2))
self.connect((self.ofdm_allocation_buffer_0, 0), (self.ofdm_multiply_const_ii_0, 0))
self.connect((self.ofdm_multiply_const_ii_0, 0), (self.ofdm_viterbi_combined_fb_0, 1))
self.connect((self.ofdm_fbmc_separate_vcvc_1, 0), (self.ofdm_fbmc_polyphase_network_vcvc_0, 0))
self.connect((self.ofdm_viterbi_combined_fb_0, 0), (self.tigr_ber_measurement_0, 2))
self.connect((self.ofdm_dynamic_trigger_ib_0, 0), (self.tigr_ber_measurement_0, 3))
self.connect((self.ofdm_fbmc_frame_sampler_0, 0), (self.tigr_fbmc_snr_estimator_0, 0))
self.connect((self.ofdm_fbmc_frame_sampler_0, 1), (self.tigr_fbmc_snr_estimator_0, 1))
self.connect((self.tigr_fbmc_inner_receiver_0, 1), (self.ofdm_fbmc_frame_sampler_0, 1))
self.connect((self.tigr_fbmc_inner_receiver_0, 2), (self.ofdm_fbmc_frame_sampler_0, 0))
self.connect((self.rms, 0), (self.blocks_throttle_0, 0))
self.connect((self.tigr_fbmc_inner_receiver_0, 3), (self.zeromq_pub_sink_0, 0))
self.connect((self.blocks_keep_one_in_n_1, 0), (self.zeromq_pub_sink_1, 0))
self.connect((self.ofdm_vector_padding_0, 0), (self.ofdm_fbmc_beta_multiplier_vcvc_0, 0))
self.connect((self.tigr_fbmc_inner_receiver_0, 0), (self.single_pole_iir_filter_xx_0, 0))
self.connect((self.ofdm_fbmc_overlapping_parallel_to_serial_vcc_0, 0), (self.rms, 0))
self.connect((self.ofdm_allocation_buffer_0, 0), (self.ofdm_dynamic_trigger_ib_0, 0))
self.connect((self.ofdm_coded_bpsk_soft_decoder_0, 0), (self.tigr_ber_measurement_0, 0))
self.connect((self.ofdm_allocation_buffer_0, 0), (self.tigr_ber_measurement_0, 1))
self.connect((self.blks2_selector_0, 0), (self.ofdm_depuncture_ff_0, 0))
self.connect((self.trellis_permutation_0, 0), (self.blks2_selector_0, 1))
self.connect((self.ofdm_generic_softdemapper_vcf_0, 0), (self.blks2_selector_0, 0))
self.connect((self.blocks_throttle_0, 0), (self.channels_channel_model_0, 0))
self.connect((self.channels_channel_model_0, 0), (self.tigr_fbmc_inner_receiver_0, 0))
self.connect((self.ofdm_fbmc_pilot_block_filter_0, 0), (self.ofdm_vector_sampler_0, 0))
self.connect((self.ofdm_allocation_buffer_0, 2), (self.ofdm_multiply_frame_fc_0, 1))
self.connect((self.ofdm_fbmc_pilot_block_filter_0, 0), (self.ofdm_multiply_frame_fc_0, 0))
self.connect((self.ofdm_multiply_frame_fc_0, 0), (self.tigr_scatterplot_0, 0))
self.connect((self.ofdm_multiply_frame_fc_0, 0), (self.ofdm_generic_softdemapper_vcf_0, 0))
def __init__(self, options):
gr.hier_block2.__init__(self, "transmit_path",
gr.io_signature(0,0,0),
gr.io_signature(2,2,gr.sizeof_gr_complex))
common_options.defaults(options)
config = self.config = station_configuration()
config.data_subcarriers = options.subcarriers
config.cp_length = options.cp_length
config.frame_data_blocks = options.data_blocks
config._verbose = options.verbose
config.fft_length = options.fft_length
config.training_data = default_block_header(config.data_subcarriers,
config.fft_length,options)
config.tx_station_id = options.station_id
config.coding = options.coding
if config.tx_station_id is None:
raise SystemError, "Station ID not set"
config.frame_id_blocks = 1 # FIXME
# digital rms amplitude sent to USRP
rms_amp = options.rms_amplitude
self._options = copy.copy(options)
self.servants = [] # FIXME
config.block_length = config.fft_length + config.cp_length
config.frame_data_part = config.frame_data_blocks + config.frame_id_blocks
config.frame_length = config.frame_data_part + \
config.training_data.no_pilotsyms
config.subcarriers = config.data_subcarriers + \
config.training_data.pilot_subcarriers
config.virtual_subcarriers = config.fft_length - config.subcarriers
# default values if parameters not set
if rms_amp is None:
rms_amp = math.sqrt(config.subcarriers)
config.rms_amplitude = rms_amp
# check some bounds
if config.fft_length < config.subcarriers:
raise SystemError, "Subcarrier number must be less than FFT length"
if config.fft_length < config.cp_length:
raise SystemError, "Cyclic prefix length must be less than FFT length"
## shortcuts
blen = config.block_length
flen = config.frame_length
dsubc = config.data_subcarriers
vsubc = config.virtual_subcarriers
# ------------------------------------------------------------------------ #
# Adaptive Transmitter Concept
used_id_bits = config.used_id_bits = 8 #TODO: no constant in source code
rep_id_bits = config.rep_id_bits = config.data_subcarriers/used_id_bits #BPSK
if config.data_subcarriers % used_id_bits <> 0:
raise SystemError,"Data subcarriers need to be multiple of %d" % (used_id_bits)
## Control Part
if options.debug:
self._control = ctrl = static_tx_control(options)
print "Statix TX Control used"
else:
self._control = ctrl = corba_tx_control(options)
print "CORBA TX Control used"
id_src = (ctrl,0)
mux_src = (ctrl,1)
map_src = self._map_src = (ctrl,2)
pa_src = (ctrl,3)
if options.log:
id_src_f = gr.short_to_float()
self.connect(id_src,id_src_f)
log_to_file(self, id_src_f, "data/id_src_out.float")
mux_src_f = gr.short_to_float()
self.connect(mux_src,mux_src_f)
log_to_file(self, mux_src_f, "data/mux_src_out.float")
map_src_s = blocks.vector_to_stream(gr.sizeof_char,config.data_subcarriers)
map_src_f = gr.char_to_float()
self.connect(map_src,map_src_s,map_src_f)
##log_to_file(self, map_src_f, "data/map_src.float")
##log_to_file(self, pa_src, "data/pa_src_out.float")
## Workaround to avoid periodic structure
seed(1)
whitener_pn = [randint(0,1) for i in range(used_id_bits*rep_id_bits)]
## ID Encoder
id_enc = self._id_encoder = repetition_encoder_sb(used_id_bits,rep_id_bits,whitener_pn)
self.connect(id_src,id_enc)
if options.log:
id_enc_f = gr.char_to_float()
self.connect(id_enc,id_enc_f)
log_to_file(self, id_enc_f, "data/id_enc_out.float")
## Bitmap Update Trigger
# TODO
#bmaptrig_stream = concatenate([[1, 2],[0]*(config.frame_data_part-7)])
bmaptrig_stream = concatenate([[1, 1],[0]*(config.frame_data_part-2)])
print"bmaptrig_stream = ",bmaptrig_stream
btrig = self._bitmap_trigger = blocks.vector_source_b(bmaptrig_stream.tolist(), True)
if options.log:
log_to_file(self, btrig, "data/bitmap_trig.char")
## Bitmap Update Trigger for puncturing
# TODO
if not options.nopunct:
#bmaptrig_stream_puncturing = concatenate([[1],[0]*(config.frame_data_part-2)])
bmaptrig_stream_puncturing = concatenate([[1],[0]*(config.frame_data_blocks/2-1)])
btrig_puncturing = self._bitmap_trigger_puncturing = blocks.vector_source_b(bmaptrig_stream_puncturing.tolist(), True)
bmapsrc_stream_puncturing = concatenate([[1]*dsubc,[2]*dsubc])
bsrc_puncturing = self._bitmap_src_puncturing = blocks.vector_source_b(bmapsrc_stream_puncturing.tolist(), True, dsubc)
if options.log and options.coding and not options.nopunct:
log_to_file(self, btrig_puncturing, "data/bitmap_trig_puncturing.char")
## Frame Trigger
# TODO
ftrig_stream = concatenate([[1],[0]*(config.frame_data_part-1)])
ftrig = self._frame_trigger = blocks.vector_source_b(ftrig_stream.tolist(),True)
## Data Multiplexer
# Input 0: control stream
# Input 1: encoded ID stream
# Inputs 2..n: data streams
dmux = self._data_multiplexer = stream_controlled_mux_b()
self.connect(mux_src,(dmux,0))
self.connect(id_enc,(dmux,1))
self._data_multiplexer_nextport = 2
if options.log:
dmux_f = gr.char_to_float()
self.connect(dmux,dmux_f)
log_to_file(self, dmux_f, "data/dmux_out.float")
## Modulator
mod = self._modulator = generic_mapper_bcv(config.data_subcarriers,options.coding)
self.connect(dmux,(mod,0))
self.connect(map_src,(mod,1))
self.connect(btrig,(mod,2))
if options.log:
log_to_file(self, mod, "data/mod_out.compl")
modi = gr.complex_to_imag(config.data_subcarriers)
modr = gr.complex_to_real(config.data_subcarriers)
self.connect(mod,modi)
self.connect(mod,modr)
log_to_file(self, modi, "data/mod_imag_out.float")
log_to_file(self, modr, "data/mod_real_out.float")
## Power allocator
if options.debug:
## static
pa = self._power_allocator = power_allocator(config.data_subcarriers)
self.connect(mod,(pa,0))
self.connect(pa_src,(pa,1))
else:
## with CORBA control event channel
ns_ip = ctrl.ns_ip
ns_port = ctrl.ns_port
evchan = ctrl.evchan
pa = self._power_allocator = corba_power_allocator(dsubc, \
evchan, ns_ip, ns_port, True)
self.connect(mod,(pa,0))
self.connect(id_src,(pa,1))
self.connect(ftrig,(pa,2))
if options.log:
log_to_file(self, pa, "data/pa_out.compl")
## Pilot subcarriers
psubc = self._pilot_subcarrier_inserter = pilot_subcarrier_inserter()
self.connect( pa ,psubc )
pilot_subc = config.training_data.shifted_pilot_tones;
print "pilot_subc", pilot_subc
stc = stc_encoder( config.subcarriers, config.frame_data_blocks, pilot_subc )
self.connect(psubc, stc)
if options.log:
log_to_file(self, psubc, "data/psubc_out.compl")
log_to_file(self, psubc_2, "data/psubc2_out.compl")
log_to_file(self, pa, "data/pa.compl")
log_to_file(self, ( stc, 0 ), "data/stc_0.compl")
log_to_file(self, ( stc, 1 ), "data/stc_1.compl")
## Add virtual subcarriers
if config.fft_length > config.subcarriers:
vsubc = self._virtual_subcarrier_extender = \
vector_padding(config.subcarriers, config.fft_length)
self.connect(stc,vsubc)
vsubc_2 = self._virtual_subcarrier_extender_2 = \
vector_padding(config.subcarriers, config.fft_length)
self.connect((stc,1),vsubc_2)
else:
vsubc = self._virtual_subcarrier_extender = psubc
vsubc_2 = self._virtual_subcarrier_extender_2 = psubc_2
log_to_file(self, psubc, "data/psubc.compl")
log_to_file(self, stc, "data/stc1.compl")
log_to_file(self, (stc,1), "data/stc2.compl")
if options.log:
log_to_file(self, vsubc, "data/vsubc_out.compl")
log_to_file(self, vsubc_2, "data/vsubc2_out.compl")
## IFFT, no window, block shift
ifft = self._ifft = fft_blocks.fft_vcc(config.fft_length,False,[],True)
self.connect(vsubc,ifft)
ifft_2 = self._ifft_2 = fft_blocks.fft_vcc(config.fft_length,False,[],True)
self.connect(vsubc_2,ifft_2)
if options.log:
log_to_file(self, ifft, "data/ifft_out.compl")
log_to_file(self, ifft_2, "data/ifft2_out.compl")
## Pilot blocks (preambles)
pblocks = self._pilot_block_inserter = pilot_block_inserter(1, False)
self.connect( ifft, pblocks )
pblocks_2 = self._pilot_block_inserter_2 = pilot_block_inserter( 2, False)
self.connect( ifft_2, pblocks_2 )
if options.log:
log_to_file(self, pblocks, "data/pilot_block_ins_out.compl")
log_to_file(self, pblocks_2, "data/pilot_block_ins2_out.compl")
## Cyclic Prefix
cp = self._cyclic_prefixer = cyclic_prefixer(config.fft_length,
config.block_length)
self.connect( pblocks, cp )
cp_2 = self._cyclic_prefixer_2 = cyclic_prefixer(config.fft_length,
config.block_length)
self.connect( pblocks_2, cp_2 )
lastblock = cp
lastblock_2 = cp_2
if options.log:
log_to_file(self, cp, "data/cp_out.compl")
log_to_file(self, cp_2, "data/cp2_out.compl")
if options.cheat:
## Artificial Channel
# kept to compare with previous system
achan_ir = concatenate([[1.0],[0.0]*(config.cp_length-1)])
achan = self._artificial_channel = gr.fir_filter_ccc(1,achan_ir)
self.connect( lastblock, achan )
lastblock = achan
achan_2 = self._artificial_channel_2 = gr.fir_filter_ccc(1,achan_ir)
self.connect( lastblock_2, achan_2 )
lastblock_2 = achan_2
## Digital Amplifier
amp = self._amplifier = ofdm.multiply_const_ccf( 1.0/math.sqrt(2) )
self.connect( lastblock, amp )
amp_2 = self._amplifier_2 = ofdm.multiply_const_ccf( 1.0/math.sqrt(2) )
self.connect( lastblock_2, amp_2 )
self.set_rms_amplitude(rms_amp)
if options.log:
log_to_file(self, amp, "data/amp_tx_out.compl")
log_to_file(self, amp_2, "data/amp_tx2_out.compl")
## Setup Output
self.connect(amp,(self,0))
self.connect(amp_2,(self,1))
# ------------------------------------------------------------------------ #
# Display some information about the setup
if config._verbose:
self._print_verbage()
