def _wait_for_volume_path(self, path):
if not os.path.isdir(path):
msg = (
_("ScaleIO volume %(volume_id)s not found at "
"expected path.") % {'volume_id': self.volume_id}
)
LOG.debug(msg)
raise exception.BrickException(message=msg)
disk_filename = None
filenames = os.listdir(path)
LOG.info(_LI(
"Files found in %(path)s path: %(files)s "),
{'path': path, 'files': filenames}
)
for filename in filenames:
if (filename.startswith("emc-vol") and
filename.endswith(self.volume_id)):
disk_filename = filename
break
if not disk_filename:
msg = (_("ScaleIO volume %(volume_id)s not found.") %
{'volume_id': self.volume_id})
LOG.debug(msg)
raise exception.BrickException(message=msg)
return disk_filename
def _find_vgc_host(self):
"""Finds vgc-cluster hostname for this box."""
params = [self.VGCCLUSTER, "domain-list", "-1"]
try:
out, unused = self._execute(*params, run_as_root=True,
root_helper=self._root_helper)
except putils.ProcessExecutionError as err:
self._log_cli_err(err)
msg = _("Unable to get list of domain members, check that "
"the cluster is running.")
raise exception.BrickException(message=msg)
domain = out.splitlines()
params = ["ip", "addr", "list"]
try:
out, unused = self._execute(*params, run_as_root=False)
except putils.ProcessExecutionError as err:
self._log_cli_err(err)
msg = _("Unable to get list of IP addresses on this host, "
"check permissions and networking.")
raise exception.BrickException(message=msg)
nets = out.splitlines()
for host in domain:
try:
ip = socket.gethostbyname(host)
for l in nets:
x = l.strip()
if x.startswith("inet %s/" % ip):
return host
except socket.error:
pass
msg = _("Current host isn't part of HGST domain.")
raise exception.BrickException(message=msg)
def disconnect_volume(self, connection_properties, device_info,
force=False, ignore_errors=False):
"""Detach and flush the volume.
:param connection_properties: The dictionary that describes all
of the target volume attributes.
For HGST must include:
name - Name of space to detach
noremovehost - Host which should never be removed
:type connection_properties: dict
:param device_info: historical difference, but same as connection_props
:type device_info: dict
"""
if connection_properties is None:
msg = _("Connection properties passed in as None.")
raise exception.BrickException(message=msg)
if 'name' not in connection_properties:
msg = _("Connection properties missing 'name' field.")
raise exception.BrickException(message=msg)
if 'noremovehost' not in connection_properties:
msg = _("Connection properties missing 'noremovehost' field.")
raise exception.BrickException(message=msg)
if connection_properties['noremovehost'] != self._hostname():
params = [self.VGCCLUSTER, 'space-set-apphosts']
params += ['-n', connection_properties['name']]
params += ['-A', self._hostname()]
params += ['--action', 'DELETE']
try:
self._execute(*params, run_as_root=True,
root_helper=self._root_helper)
except putils.ProcessExecutionError as err:
self._log_cli_err(err)
msg = (_("Unable to set apphost for space %s") %
connection_properties['name'])
raise exception.BrickException(message=msg)
def disconnect_volume(self, connection_properties, device_info,
force=False, ignore_errors=False):
"""Disconnect a volume from an instance."""
volume_name = None
if 'name' in connection_properties.keys():
volume_name = connection_properties['name']
if volume_name is None:
msg = _("Failed to disconnect volume: invalid volume name")
raise exception.BrickException(message=msg)
cmd_arg = {'operation': 'disconnect_volume'}
cmd_arg['volume_guid'] = volume_name
cmdarg_json = json.dumps(cmd_arg)
LOG.debug("HyperScale command hscli: %(cmd_arg)s",
{'cmd_arg': cmdarg_json})
try:
(out, err) = self._execute('hscli', cmdarg_json,
run_as_root=True,
root_helper=self._root_helper)
except putils.ProcessExecutionError as e:
msg = (_("Error executing hscli: %(err)s") % {'err': e.stderr})
raise exception.BrickException(message=msg)
if err:
msg = (_("Failed to connect volume: stdout=%(out)s "
"stderr=%(err)s") % {'out': out, 'err': err})
raise exception.BrickException(message=msg)
def __init__(self, mount_type, root_helper,
execute=putils.execute, *args, **kwargs):
self._mount_type = mount_type
if mount_type == "nfs":
self._mount_base = kwargs.get('nfs_mount_point_base', None)
if not self._mount_base:
raise exception.InvalidParameterValue(
err=_('nfs_mount_point_base required'))
self._mount_options = kwargs.get('nfs_mount_options', None)
self._check_nfs_options()
elif mount_type == "cifs":
self._mount_base = kwargs.get('smbfs_mount_point_base', None)
if not self._mount_base:
raise exception.InvalidParameterValue(
err=_('smbfs_mount_point_base required'))
self._mount_options = kwargs.get('smbfs_mount_options', None)
elif mount_type == "glusterfs":
self._mount_base = kwargs.get('glusterfs_mount_point_base', None)
if not self._mount_base:
raise exception.InvalidParameterValue(
err=_('glusterfs_mount_point_base required'))
self._mount_options = None
else:
raise exception.ProtocolNotSupported(protocol=mount_type)
self.root_helper = root_helper
self.set_execute(execute)
def connect_volume(self, connection_properties):
"""Attach a Space volume to running host.
:param connection_properties: The dictionary that describes all
of the target volume attributes.
connection_properties for HGST must include:
name - Name of space to attach
:type connection_properties: dict
:returns: dict
"""
if connection_properties is None:
msg = _("Connection properties passed in as None.")
raise exception.BrickException(message=msg)
if 'name' not in connection_properties:
msg = _("Connection properties missing 'name' field.")
raise exception.BrickException(message=msg)
device_info = {
'type': 'block',
'device': connection_properties['name'],
'path': '/dev/' + connection_properties['name']
}
volname = device_info['device']
params = [self.VGCCLUSTER, 'space-set-apphosts']
params += ['-n', volname]
params += ['-A', self._hostname()]
params += ['--action', 'ADD']
try:
self._execute(*params, run_as_root=True,
root_helper=self._root_helper)
except putils.ProcessExecutionError as err:
self._log_cli_err(err)
msg = (_("Unable to set apphost for space %s") % volname)
raise exception.BrickException(message=msg)
return device_info
def disconnect_volume(self, connection_properties, device_info,
force=False, ignore_errors=False):
tmp_file_path = device_info['path']
if not os.path.exists(tmp_file_path):
msg = _("Vmdk: %s not found.") % tmp_file_path
raise exception.NotFound(message=msg)
session = None
try:
# We upload the temporary file to vCenter server only if it is
# modified after connect_volume.
if os.path.getmtime(tmp_file_path) > device_info['last_modified']:
self._load_config(connection_properties)
session = self._create_session()
backing = vim_util.get_moref(connection_properties['volume'],
"VirtualMachine")
# Currently there is no way we can restore the volume if it
# contains redo-log based snapshots (bug 1599026).
if self._snapshot_exists(session, backing):
msg = (_("Backing of volume: %s contains one or more "
"snapshots; cannot disconnect.") %
connection_properties['volume_id'])
raise exception.BrickException(message=msg)
ds_ref = vim_util.get_moref(
connection_properties['datastore'], "Datastore")
dc_ref = vim_util.get_moref(
connection_properties['datacenter'], "Datacenter")
vmdk_path = connection_properties['vmdk_path']
self._disconnect(
tmp_file_path, session, ds_ref, dc_ref, vmdk_path)
finally:
os.remove(tmp_file_path)
if session:
session.logout()
def connect_volume(self, connection_properties):
"""Connect to a volume.
:param connection_properties: The dictionary that describes all
of the target volume attributes.
:type connection_properties: dict
:returns: dict
"""
LOG.debug("Connect_volume connection properties: %s.",
connection_properties)
out = self._attach_volume(connection_properties['volume_id'])
if not out or int(out['ret_code']) not in (self.attached_success_code,
self.has_been_attached_code,
self.attach_mnid_done_code):
msg = (_("Attach volume failed, "
"error code is %s") % out['ret_code'])
raise exception.BrickException(message=msg)
try:
volume_path = self._get_volume_path(connection_properties)
except Exception:
msg = _("query attached volume failed or volume not attached.")
LOG.error(msg)
raise exception.BrickException(message=msg)
device_info = {'type': 'block',
'path': volume_path}
return device_info
def __init__(self, user, pool, *args, **kwargs):
self.rbd_user = user
self.rbd_pool = pool
for attr in ['rbd_user', 'rbd_pool']:
val = getattr(self, attr)
if val is not None:
setattr(self, attr, utils.convert_str(val))
# allow these to be overridden for testing
self.rados = kwargs.get('rados', rados)
self.rbd = kwargs.get('rbd', rbd)
if self.rados is None:
raise exception.InvalidParameterValue(
err=_('rados module required'))
if self.rbd is None:
raise exception.InvalidParameterValue(
err=_('rbd module required'))
self.rbd_conf = kwargs.get('conffile', '/etc/ceph/ceph.conf')
self.rbd_cluster_name = kwargs.get('rbd_cluster_name', 'ceph')
self.rados_connect_timeout = kwargs.get('rados_connect_timeout', -1)
self.client, self.ioctx = self.connect()
def _get_volume_id(self):
volname_encoded = urllib.parse.quote(self.volume_name, '')
volname_double_encoded = urllib.parse.quote(volname_encoded, '')
LOG.debug(_(
"Volume name after double encoding is %(volume_name)s."),
{'volume_name': volname_double_encoded}
)
request = (
"https://%(server_ip)s:%(server_port)s/api/types/Volume/instances"
"/getByName::%(encoded_volume_name)s" %
{
'server_ip': self.server_ip,
'server_port': self.server_port,
'encoded_volume_name': volname_double_encoded
}
)
LOG.info(
_LI("ScaleIO get volume id by name request: %(request)s"),
{'request': request}
)
r = requests.get(request,
auth=(self.server_username, self.server_token),
verify=False)
r = self._check_response(r, request)
volume_id = r.json()
if not volume_id:
msg = (_("Volume with name %(volume_name)s wasn't found.") %
{'volume_name': self.volume_name})
LOG.error(msg)
raise exception.BrickException(message=msg)
if r.status_code != self.OK_STATUS_CODE and "errorCode" in volume_id:
msg = (
_("Error getting volume id from name %(volume_name)s: "
"%(err)s") %
{'volume_name': self.volume_name, 'err': volume_id['message']}
)
LOG.error(msg)
raise exception.BrickException(message=msg)
LOG.info(_LI("ScaleIO volume id is %(volume_id)s."),
{'volume_id': volume_id})
return volume_id
def _mount_vzstorage(self, vz_share, mount_path, flags=None):
m = re.search("(?:(\S+):\/)?([a-zA-Z0-9_-]+)(?::(\S+))?", vz_share)
if not m:
msg = (_("Invalid Virtuozzo Storage share specification: %r."
"Must be: [MDS1[,MDS2],...:/]<CLUSTER NAME>[:PASSWORD].")
% vz_share)
raise exception.BrickException(msg)
mdss = m.group(1)
cluster_name = m.group(2)
passwd = m.group(3)
if mdss:
mdss = mdss.split(',')
self._vzstorage_write_mds_list(cluster_name, mdss)
if passwd:
self._execute('pstorage', '-c', cluster_name, 'auth-node', '-P',
process_input=passwd,
root_helper=self.root_helper, run_as_root=True)
mnt_cmd = ['pstorage-mount', '-c', cluster_name]
if flags:
mnt_cmd.extend(flags)
mnt_cmd.extend([mount_path])
self._execute(*mnt_cmd, root_helper=self.root_helper,
run_as_root=True, check_exit_code=0)
def retry(exceptions, interval=1, retries=3, backoff_rate=2):
def _retry_on_exception(e):
return isinstance(e, exceptions)
def _backoff_sleep(previous_attempt_number, delay_since_first_attempt_ms):
exp = backoff_rate ** previous_attempt_number
wait_for = max(0, interval * exp)
LOG.debug("Sleeping for %s seconds", wait_for)
return wait_for * 1000.0
def _print_stop(previous_attempt_number, delay_since_first_attempt_ms):
delay_since_first_attempt = delay_since_first_attempt_ms / 1000.0
LOG.debug("Failed attempt %s", previous_attempt_number)
LOG.debug("Have been at this for %s seconds",
delay_since_first_attempt)
return previous_attempt_number == retries
if retries < 1:
raise ValueError(_('Retries must be greater than or '
'equal to 1 (received: %s). ') % retries)
def _decorator(f):
@six.wraps(f)
def _wrapper(*args, **kwargs):
r = retrying.Retrying(retry_on_exception=_retry_on_exception,
wait_func=_backoff_sleep,
stop_func=_print_stop)
return r.call(f, *args, **kwargs)
return _wrapper
return _decorator
def connect_volume(self, connection_properties):
"""Connect to a volume.
:param connection_properties: The dictionary that describes all
of the target volume attributes.
:type connection_properties: dict
:returns: dict
"""
do_local_attach = connection_properties.get('do_local_attach',
self.do_local_attach)
if do_local_attach:
# NOTE(e0ne): sanity check if ceph-common is installed.
cmd = ['which', 'rbd']
try:
self._execute(*cmd)
except putils.ProcessExecutionError:
msg = _("ceph-common package is not installed.")
LOG.error(msg)
raise exception.BrickException(message=msg)
# NOTE(e0ne): map volume to a block device
# via the rbd kernel module.
pool, volume = connection_properties['name'].split('/')
cmd = ['rbd', 'map', volume, '--pool', pool]
self._execute(*cmd, root_helper=self._root_helper,
run_as_root=True)
return {'path': RBDConnector.get_rbd_device_name(pool, volume),
'type': 'block'}
rbd_handle = self._get_rbd_handle(connection_properties)
return {'path': rbd_handle}
def _get_rbd_handle(self, connection_properties):
try:
user = connection_properties['auth_username']
pool, volume = connection_properties['name'].split('/')
cluster_name = connection_properties.get('cluster_name')
monitor_ips = connection_properties.get('hosts')
monitor_ports = connection_properties.get('ports')
keyring = connection_properties.get('keyring')
except IndexError:
msg = _("Connect volume failed, malformed connection properties")
raise exception.BrickException(msg=msg)
conf = self._create_ceph_conf(monitor_ips, monitor_ports,
str(cluster_name), user,
keyring)
try:
rbd_client = linuxrbd.RBDClient(user, pool, conffile=conf,
rbd_cluster_name=str(cluster_name))
rbd_volume = linuxrbd.RBDVolume(rbd_client, volume)
rbd_handle = linuxrbd.RBDVolumeIOWrapper(
linuxrbd.RBDImageMetadata(rbd_volume, pool, user, conf))
except Exception:
fileutils.delete_if_exists(conf)
raise
return rbd_handle
def fileno(self):
"""Sheepdog does not have support for fileno so we raise IOError.
Raising IOError is recommended way to notify caller that interface is
not supported - see http://docs.python.org/2/library/io.html#io.IOBase
"""
raise IOError(_("fileno is not supported by SheepdogVolumeIOWrapper"))
def fileno(self):
"""RBD does not have support for fileno() so we raise IOError.
Raising IOError is recommended way to notify caller that interface is
not supported - see http://docs.python.org/2/library/io.html#io.IOBase
"""
raise IOError(_("fileno() not supported by RBD()"))
def seek(self, offset, whence=0):
if whence == 0:
new_offset = offset
elif whence == 1:
new_offset = self._offset + offset
elif whence == 2:
new_offset = self._rbd_volume.image.size()
new_offset += offset
else:
raise IOError(_("Invalid argument - whence=%s not supported") %
(whence))
if (new_offset < 0):
raise IOError(_("Invalid argument"))
self._offset = new_offset
def __init__(self, mount_type, root_helper,
execute=putils.execute, *args, **kwargs):
mount_type_to_option_prefix = {
'nfs': 'nfs',
'cifs': 'smbfs',
'glusterfs': 'glusterfs',
'vzstorage': 'vzstorage',
'quobyte': 'quobyte'
}
if mount_type not in mount_type_to_option_prefix:
raise exception.ProtocolNotSupported(protocol=mount_type)
self._mount_type = mount_type
option_prefix = mount_type_to_option_prefix[mount_type]
self._mount_base = kwargs.get(option_prefix + '_mount_point_base')
if not self._mount_base:
raise exception.InvalidParameterValue(
err=_('%s_mount_point_base required') % option_prefix)
self._mount_options = kwargs.get(option_prefix + '_mount_options')
if mount_type == "nfs":
self._check_nfs_options()
self.root_helper = root_helper
self.set_execute(execute)
def _get_volume_path(self, connection_properties):
out = self._query_attached_volume(
connection_properties['volume_id'])
if not out or int(out['ret_code']) != 0:
msg = _("Couldn't find attached volume.")
LOG.error(msg)
raise exception.BrickException(message=msg)
return out['dev_addr']
def get_local_share_path(self, share, expect_existing=True):
local_share_path = self._smbutils.get_smb_share_path(share)
if not local_share_path and expect_existing:
err_msg = _("Could not find the local "
"share path for %(share)s.")
raise exception.VolumePathsNotFound(err_msg % dict(share=share))
return local_share_path
def _check_device_paths(self, device_paths):
if len(device_paths) > 1:
err_msg = _("Multiple volume paths were found: %s. This can "
"occur if multipath is used and MPIO is not "
"properly configured, thus not claiming the device "
"paths. This issue must be addressed urgently as "
"it can lead to data corruption.")
raise exception.BrickException(err_msg % device_paths)
def get_volume_paths(self, connection_properties):
volume_path = None
try:
volume_path = self._get_volume_path(connection_properties)
except Exception:
msg = _("Couldn't find a volume.")
LOG.warning(msg)
raise exception.BrickException(message=msg)
return [volume_path]
def extend_volume(self, connection_properties):
volume_paths = self.get_volume_paths(connection_properties)
if not volume_paths:
err_msg = _("Could not find the disk. Extend failed.")
raise exception.NotFound(err_msg)
device_path = volume_paths[0]
device_number = self._diskutils.get_device_number_from_device_name(
device_path)
self._diskutils.refresh_disk(device_number)
def _check_or_get_keyring_contents(self, keyring, cluster_name, user):
try:
if keyring is None:
keyring_path = ("/etc/ceph/%s.client.%s.keyring" %
(cluster_name, user))
with open(keyring_path, 'r') as keyring_file:
keyring = keyring_file.read()
return keyring
except IOError:
msg = (_("Keyring path %s is not readable.") % (keyring_path))
raise exception.BrickException(msg=msg)
def __init__(self, mount_type, root_helper,
execute=None, *args, **kwargs):
self._mount_type = mount_type
self._mount_base = kwargs.get(
'scality_mount_point_base', "").rstrip('/')
if not self._mount_base:
raise exception.InvalidParameterValue(
err=_('scality_mount_point_base required'))
self.root_helper = root_helper
self.set_execute(execute or putils.execute)
self._mount_options = None
def __init__(self, mount_type, root_helper,
execute=None, *args, **kwargs):
super(ScalityRemoteFsClient, self).__init__(mount_type, root_helper,
execute=execute,
*args, **kwargs)
self._mount_type = mount_type
self._mount_base = kwargs.get(
'scality_mount_point_base', "").rstrip('/')
if not self._mount_base:
raise exception.InvalidParameterValue(
err=_('scality_mount_point_base required'))
self._mount_options = None
def _create_mount_point(self, share):
mnt_point = self.get_mount_point(share)
if not os.path.isdir(self._mount_base):
os.makedirs(self._mount_base)
if os.path.exists(mnt_point):
if not self._pathutils.is_symlink(mnt_point):
raise exception.BrickException(_("Link path already exists "
"and it's not a symlink"))
else:
self._pathutils.create_sym_link(mnt_point, share)
def connect_volume(self, connection_properties):
volume_connected = False
for (initiator_name,
target_portal,
target_iqn,
target_lun) in self._get_all_paths(connection_properties):
try:
LOG.info("Attempting to establish an iSCSI session to "
"target %(target_iqn)s on portal %(target_portal)s "
"accessing LUN %(target_lun)s using initiator "
"%(initiator_name)s.",
dict(target_portal=target_portal,
target_iqn=target_iqn,
target_lun=target_lun,
initiator_name=initiator_name))
self._iscsi_utils.login_storage_target(
target_lun=target_lun,
target_iqn=target_iqn,
target_portal=target_portal,
auth_username=connection_properties.get('auth_username'),
auth_password=connection_properties.get('auth_password'),
mpio_enabled=self.use_multipath,
initiator_name=initiator_name,
ensure_lun_available=False)
self._iscsi_utils.ensure_lun_available(
target_iqn=target_iqn,
target_lun=target_lun,
rescan_attempts=self.device_scan_attempts,
retry_interval=self.device_scan_interval)
if not volume_connected:
(device_number,
device_path) = (
self._iscsi_utils.get_device_number_and_path(
target_iqn, target_lun))
volume_connected = True
if not self.use_multipath:
break
except os_win_exc.OSWinException:
LOG.exception("Could not establish the iSCSI session.")
if not volume_connected:
raise exception.BrickException(
_("Could not connect volume %s.") % connection_properties)
scsi_wwn = self._get_scsi_wwn(device_number)
device_info = {'type': 'block',
'path': device_path,
'number': device_number,
'scsi_wwn': scsi_wwn}
return device_info
def _get_sheepdog_handle(self, connection_properties):
try:
host = connection_properties['hosts'][0]
name = connection_properties['name']
port = connection_properties['ports'][0]
except IndexError:
msg = _("Connect volume failed, malformed connection properties")
raise exception.BrickException(msg=msg)
sheepdog_handle = linuxsheepdog.SheepdogVolumeIOWrapper(
host, port, name)
return sheepdog_handle
def seek(self, offset, whence=0):
if not self._valid:
raise exception.VolumeDriverException(name=self._vdiname)
if whence == 0:
# SEEK_SET or 0 - start of the stream (the default);
# offset should be zero or positive
new_offset = offset
elif whence == 1:
# SEEK_CUR or 1 - current stream position; offset may be negative
new_offset = self._offset + offset
else:
# SEEK_END or 2 - end of the stream; offset is usually negative
# TODO(yamada-h): Support SEEK_END
raise IOError(_("Invalid argument - whence=%s not supported.") %
whence)
if new_offset < 0:
raise IOError(_("Invalid argument - negative seek offset."))
self._offset = new_offset
def _create_mount_point(self, share, use_local_path):
# The mount point will contain a hash of the share so we're
# intentionally preserving the original share path as this is
# what the caller will expect.
mnt_point = self.get_mount_point(share)
share_norm_path = self._get_share_norm_path(share)
symlink_dest = (share_norm_path if not use_local_path else
self.get_local_share_path(share))
if not os.path.isdir(self._mount_base):
os.makedirs(self._mount_base)
if os.path.exists(mnt_point):
if not self._pathutils.is_symlink(mnt_point):
raise exception.BrickException(
_("Link path already exists "
"and it's not a symlink"))
else:
self._pathutils.create_sym_link(mnt_point, symlink_dest)
def __init__(self, *args, **kwargs):
# Check if oslo.vmware library is available.
if vim_util is None:
message = _("Missing oslo_vmware python module, ensure oslo.vmware"
" library is installed and available.")
raise exception.BrickException(message=message)
super(VmdkConnector, self).__init__(*args, **kwargs)
self._ip = None
self._port = None
self._username = None
self._password = None
self._api_retry_count = None
self._task_poll_interval = None
self._ca_file = None
self._insecure = None
self._tmp_dir = None
self._timeout = None
def _create_ceph_conf(self, monitor_ips, monitor_ports, cluster_name, user,
keyring):
monitors = [
"%s:%s" % (ip, port) for ip, port in zip(
self._sanitize_mon_hosts(monitor_ips), monitor_ports)
]
mon_hosts = "mon_host = %s" % (','.join(monitors))
keyring = self._check_or_get_keyring_contents(keyring, cluster_name,
user)
try:
fd, ceph_conf_path = tempfile.mkstemp(prefix="brickrbd_")
with os.fdopen(fd, 'w') as conf_file:
conf_file.writelines([mon_hosts, "\n", keyring, "\n"])
return ceph_conf_path
except IOError:
msg = (_("Failed to write data to %s.") % (ceph_conf_path))
raise exception.BrickException(msg=msg)
def connect_volume(self, connection_properties):
"""Connect to a volume.
:param connection_properties: The dictionary that describes all
of the target volume attributes.
:type connection_properties: dict
:returns: dict
"""
do_local_attach = connection_properties.get('do_local_attach',
self.do_local_attach)
if do_local_attach:
# NOTE(e0ne): sanity check if ceph-common is installed.
cmd = ['which', 'rbd']
try:
self._execute(*cmd)
except putils.ProcessExecutionError:
msg = _("ceph-common package is not installed.")
LOG.error(msg)
raise exception.BrickException(message=msg)
# NOTE(e0ne): map volume to a block device
# via the rbd kernel module.
pool, volume = connection_properties['name'].split('/')
rbd_dev_path = RBDConnector.get_rbd_device_name(pool, volume)
if (not os.path.islink(rbd_dev_path) or
not os.path.exists(os.path.realpath(rbd_dev_path))):
cmd = ['rbd', 'map', volume, '--pool', pool]
cmd += self._get_rbd_args(connection_properties)
self._execute(*cmd, root_helper=self._root_helper,
run_as_root=True)
else:
LOG.debug('volume %(vol)s is already mapped to local'
' device %(dev)s',
{'vol': volume,
'dev': os.path.realpath(rbd_dev_path)})
return {'path': rbd_dev_path,
'type': 'block'}
rbd_handle = self._get_rbd_handle(connection_properties)
return {'path': rbd_handle}
def _check_response(self,
response,
request,
is_get_request=True,
params=None):
if response.status_code == 401 or response.status_code == 403:
LOG.info(
_LI("Token is invalid, "
"going to re-login to get a new one"))
login_request = (
"https://%(server_ip)s:%(server_port)s/api/login" % {
'server_ip': self.server_ip,
'server_port': self.server_port
})
r = requests.get(login_request,
auth=(self.server_username, self.server_password),
verify=False)
token = r.json()
# repeat request with valid token
LOG.debug(
_("Going to perform request %(request)s again "
"with valid token"), {'request': request})
if is_get_request:
res = requests.get(request,
auth=(self.server_username, token),
verify=False)
else:
headers = {'content-type': 'application/json'}
res = requests.post(request,
data=json.dumps(params),
headers=headers,
auth=(self.server_username, token),
verify=False)
self.server_token = token
return res
return response
def connect_volume(self, connection_properties):
"""Connect to a volume.
:param connection_properties: The dictionary that describes all
of the target volume attributes.
connection_properties must include:
device_path - path to the volume to be connected
:type connection_properties: dict
:returns: dict
"""
if 'device_path' not in connection_properties:
msg = (_("Invalid connection_properties specified "
"no device_path attribute."))
raise ValueError(msg)
device_info = {
'type': 'gpfs',
'path': connection_properties['device_path']
}
return device_info
def connect(self):
LOG.debug("opening connection to ceph cluster (timeout=%s).",
self.rados_connect_timeout)
client = self.rados.Rados(rados_id=self.rbd_user,
clustername=self.rbd_cluster_name,
conffile=self.rbd_conf)
try:
if self.rados_connect_timeout >= 0:
client.connect(timeout=self.rados_connect_timeout)
else:
client.connect()
ioctx = client.open_ioctx(self.rbd_pool)
return client, ioctx
except self.rados.Error:
msg = _("Error connecting to ceph cluster.")
LOG.exception(msg)
# shutdown cannot raise an exception
client.shutdown()
raise exception.BrickException(message=msg)
def _create_ceph_conf(self, monitor_ips, monitor_ports, cluster_name,
user):
monitors = [
"%s:%s" % (ip, port) for ip, port in zip(
self._sanitize_mon_hosts(monitor_ips), monitor_ports)
]
mon_hosts = "mon_host = %s" % (','.join(monitors))
client_section = "[client.%s]" % user
keyring = ("keyring = /etc/ceph/%s.client.%s.keyring" %
(cluster_name, user))
try:
fd, ceph_conf_path = tempfile.mkstemp(prefix="brickrbd_")
with os.fdopen(fd, 'w') as conf_file:
conf_file.writelines(
[mon_hosts, "\n", client_section, "\n", keyring])
return ceph_conf_path
except IOError:
msg = (_("Failed to write data to %s.") % (ceph_conf_path))
raise exception.BrickException(msg=msg)
def _show_rbd_mapping(self, connection_properties):
# TODO(lpetrut): consider using "rbd device show" if/when
# it becomes available.
cmd = [
'rbd-wnbd', 'show', connection_properties['name'], '--format',
'json'
]
try:
out, err = self._execute(*cmd)
return json.loads(out)
except processutils.ProcessExecutionError as ex:
if abs(ctypes.c_int32(ex.exit_code).value) == errno.ENOENT:
LOG.debug("Couldn't find RBD mapping: %s",
connection_properties['name'])
return
raise
except json.decoder.JSONDecodeError:
msg = _("Could not get rbd mappping.")
LOG.exception(msg)
raise exception.BrickException(msg)
def _cli_cmd(self, method, volume_name):
LOG.debug("Enter into _cli_cmd.")
if not self.iscliexist:
msg = _("SDS command line doesn't exist, "
"can't execute SDS command.")
raise exception.BrickException(message=msg)
if not method or volume_name is None:
return
cmd = [self.cli_path, '-c', method, '-v', volume_name]
out, clilog = self._execute(*cmd,
run_as_root=False,
root_helper=self._root_helper)
analyse_result = self._analyze_output(out)
LOG.debug('%(method)s volume returns %(analyse_result)s.', {
'method': method,
'analyse_result': analyse_result
})
if clilog:
LOG.error(_LE("SDS CLI output some log: %s."), clilog)
return analyse_result
def factory(protocol,
root_helper,
driver=None,
use_multipath=False,
device_scan_attempts=initiator.DEVICE_SCAN_ATTEMPTS_DEFAULT,
arch=None,
*args,
**kwargs):
"""Build a Connector object based upon protocol and architecture."""
_mapping = get_connector_mapping(arch)
LOG.debug("Factory for %(protocol)s on %(arch)s", {
'protocol': protocol,
'arch': arch
})
protocol = protocol.upper()
# set any special kwargs needed by connectors
if protocol in (initiator.NFS, initiator.GLUSTERFS, initiator.SCALITY,
initiator.QUOBYTE, initiator.VZSTORAGE):
kwargs.update({'mount_type': protocol.lower()})
elif protocol == initiator.ISER:
kwargs.update({'transport': 'iser'})
# now set all the default kwargs
kwargs.update({
'root_helper': root_helper,
'driver': driver,
'use_multipath': use_multipath,
'device_scan_attempts': device_scan_attempts,
})
connector = _mapping.get(protocol)
if not connector:
msg = (_("Invalid InitiatorConnector protocol "
"specified %(protocol)s") % dict(protocol=protocol))
raise exception.InvalidConnectorProtocol(msg)
conn_cls = importutils.import_class(connector)
return conn_cls(*args, **kwargs)
def _do_mount(self,
mount_type,
vz_share,
mount_path,
mount_options=None,
flags=None):
m = re.search(r"(?:(\S+):\/)?([a-zA-Z0-9_-]+)(?::(\S+))?", vz_share)
if not m:
msg = (
_("Invalid Virtuozzo Storage share specification: %r."
"Must be: [MDS1[,MDS2],...:/]<CLUSTER NAME>[:PASSWORD].") %
vz_share)
raise exception.BrickException(msg)
mdss = m.group(1)
cluster_name = m.group(2)
passwd = m.group(3)
if mdss:
mdss = mdss.split(',')
self._vzstorage_write_mds_list(cluster_name, mdss)
if passwd:
self._execute('pstorage',
'-c',
cluster_name,
'auth-node',
'-P',
process_input=passwd,
root_helper=self._root_helper,
run_as_root=True)
mnt_cmd = ['pstorage-mount', '-c', cluster_name]
if flags:
mnt_cmd.extend(flags)
mnt_cmd.extend([mount_path])
self._execute(*mnt_cmd,
root_helper=self._root_helper,
run_as_root=True,
check_exit_code=0)
def get_local_share_path(self, share, expect_existing=True):
share = self._get_share_norm_path(share)
share_name = self.get_share_name(share)
share_subdir = self.get_share_subdir(share)
is_local_share = self._smbutils.is_local_share(share)
if not is_local_share:
LOG.debug("Share '%s' is not exposed by the current host.", share)
local_share_path = None
else:
local_share_path = self._smbutils.get_smb_share_path(share_name)
if not local_share_path and expect_existing:
err_msg = _("Could not find the local "
"share path for %(share)s.")
raise exception.VolumePathsNotFound(err_msg % dict(share=share))
if local_share_path and share_subdir:
local_share_path = os.path.join(local_share_path, share_subdir)
return local_share_path
def _mount_nfs(self, nfs_share, mount_path, flags=None):
"""Mount nfs share using present mount types."""
mnt_errors = {}
# This loop allows us to first try to mount with NFS 4.1 for pNFS
# support but falls back to mount NFS 4 or NFS 3 if either the client
# or server do not support it.
for mnt_type in sorted(self._nfs_mount_type_opts.keys(), reverse=True):
options = self._nfs_mount_type_opts[mnt_type]
try:
self._do_mount('nfs', nfs_share, mount_path, options, flags)
LOG.debug('Mounted %(sh)s using %(mnt_type)s.',
{'sh': nfs_share, 'mnt_type': mnt_type})
return
except Exception as e:
mnt_errors[mnt_type] = six.text_type(e)
LOG.debug('Failed to do %s mount.', mnt_type)
raise exception.BrickException(_("NFS mount failed for share %(sh)s. "
"Error - %(error)s")
% {'sh': nfs_share,
'error': mnt_errors})
def create_non_openstack_config(cls, connection_properties):
"""Get root owned Ceph's .conf file for non OpenStack usage."""
# If keyring info is missing then we are in OpenStack, nothing to do
keyring = connection_properties.get('keyring')
if not keyring:
return None
try:
user = connection_properties['auth_username']
pool, volume = connection_properties['name'].split('/')
cluster_name = connection_properties['cluster_name']
monitor_ips = connection_properties['hosts']
monitor_ports = connection_properties['ports']
keyring = connection_properties.get('keyring')
except (KeyError, ValueError):
msg = _("Connect volume failed, malformed connection properties.")
raise exception.BrickException(msg=msg)
conf = rbd_privsep.root_create_ceph_conf(monitor_ips, monitor_ports,
str(cluster_name), user,
keyring)
return conf
def _get_rbd_args(cls, connection_properties, conf=None):
try:
user = connection_properties['auth_username']
monitor_ips = connection_properties.get('hosts')
monitor_ports = connection_properties.get('ports')
except KeyError:
msg = _("Connect volume failed, malformed connection properties")
raise exception.BrickException(msg=msg)
args = ['--id', user]
if monitor_ips and monitor_ports:
monitors = ["%s:%s" % (ip, port) for ip, port in
zip(
cls._sanitize_mon_hosts(monitor_ips),
monitor_ports)]
for monitor in monitors:
args += ['--mon_host', monitor]
if conf:
args += ['--conf', conf]
return args
def _create_ceph_conf(cls, monitor_ips, monitor_ports,
cluster_name, user, keyring):
monitors = ["%s:%s" % (ip, port) for ip, port in
zip(cls._sanitize_mon_hosts(monitor_ips), monitor_ports)]
mon_hosts = "mon_host = %s" % (','.join(monitors))
keyring = cls._check_or_get_keyring_contents(keyring, cluster_name,
user)
try:
fd, ceph_conf_path = tempfile.mkstemp(prefix="brickrbd_")
with os.fdopen(fd, 'w') as conf_file:
# Bug #1865754 - '[global]' has been the appropriate
# place for this stuff since at least Hammer, but in
# Octopus (15.2.0+), Ceph began enforcing this.
conf_file.writelines(["[global]", "\n",
mon_hosts, "\n",
keyring, "\n"])
return ceph_conf_path
except IOError:
msg = (_("Failed to write data to %s.") % (ceph_conf_path))
raise exception.BrickException(msg=msg)
def __init__(self, mount_type, root_helper,
execute=None, *args, **kwargs):
# For backwards compatibility, `putils.execute` is interpreted
# as a sentinel to mean "I want the os-brick default" :-/
# This can be burnt as soon as we update all the callsites (in
# nova+cinder) to the new default - and then we shall never
# speak of it again.
# TODO(gus): RemoteFsClient should probably inherit from Executor
if execute is None or execute == putils.execute:
execute = priv_rootwrap.execute
mount_type_to_option_prefix = {
'nfs': 'nfs',
'cifs': 'smbfs',
'glusterfs': 'glusterfs',
'vzstorage': 'vzstorage',
'quobyte': 'quobyte'
}
if mount_type not in mount_type_to_option_prefix:
raise exception.ProtocolNotSupported(protocol=mount_type)
self._mount_type = mount_type
option_prefix = mount_type_to_option_prefix[mount_type]
self._mount_base = kwargs.get(option_prefix + '_mount_point_base')
if not self._mount_base:
raise exception.InvalidParameterValue(
err=_('%s_mount_point_base required') % option_prefix)
self._mount_options = kwargs.get(option_prefix + '_mount_options')
if mount_type == "nfs":
self._check_nfs_options()
self.root_helper = root_helper
self.set_execute(execute)
def connect_volume(self, connection_properties):
"""Connect to a volume.
:param connection_properties: The dictionary that describes all
of the target volume attributes.
:type connection_properties: dict
:returns: dict
"""
do_local_attach = connection_properties.get('do_local_attach',
self.do_local_attach)
if do_local_attach:
# NOTE(e0ne): sanity check if ceph-common is installed.
cmd = ['which', 'rbd']
try:
self._execute(*cmd)
except putils.ProcessExecutionError:
msg = _("ceph-common package is not installed.")
LOG.error(msg)
raise exception.BrickException(message=msg)
# NOTE(e0ne): map volume to a block device
# via the rbd kernel module.
pool, volume = connection_properties['name'].split('/')
cmd = ['rbd', 'map', volume, '--pool', pool]
self._execute(*cmd,
root_helper=self._root_helper,
run_as_root=True)
return {
'path': RBDConnector.get_rbd_device_name(pool, volume),
'type': 'block'
}
rbd_handle = self._get_rbd_handle(connection_properties)
return {'path': rbd_handle}
def retry(exceptions, interval=1, retries=3, backoff_rate=2):
if retries < 1:
raise ValueError(
_('Retries must be greater than or '
'equal to 1 (received: %s). ') % retries)
def _decorator(f):
@functools.wraps(f)
def _wrapper(*args, **kwargs):
r = tenacity.Retrying(
before_sleep=tenacity.before_sleep_log(LOG, logging.DEBUG),
after=tenacity.after_log(LOG, logging.DEBUG),
stop=tenacity.stop_after_attempt(retries),
reraise=True,
retry=tenacity.retry_if_exception_type(exceptions),
wait=tenacity.wait_exponential(multiplier=interval,
min=0,
exp_base=backoff_rate))
return r.call(f, *args, **kwargs)
return _wrapper
return _decorator
class VolumeNotDeactivated(BrickException):
message = _('Volume %(name)s was not deactivated in time.')
class NoFibreChannelVolumeDeviceFound(BrickException):
message = _("Unable to find a Fibre Channel volume device.")
class NoFibreChannelHostsFound(BrickException):
message = _("We are unable to locate any Fibre Channel devices.")
class InvalidParameterValue(Invalid):
message = _("%(err)s")
class Invalid(BrickException):
message = _("Unacceptable parameters.")
code = 400
class NotFound(BrickException):
message = _("Resource could not be found.")
code = 404
safe = True
class VolumeEncryptionNotSupported(Invalid):
message = _("Volume encryption is not supported for %(volume_type)s "
"volume %(volume_id)s.")
class InvalidIOHandleObject(BrickException):
message = _('IO handle of %(protocol)s has wrong object '
'type %(actual_type)s.')
class VolumeDriverException(BrickException):
message = _('An error occurred while IO to volume %(name)s.')
class CommandExecutionFailed(BrickException):
message = _("Failed to execute command %(cmd)s")
