def runSrcMaps(self, run=True):
"""Generates a source map for your region. Checks to make
sure that there's an XML model to be had and if not, creates
one from the 2FGL."""
self.generateXMLmodel()
try:
qU.checkForFiles(self.logger,[self.commonConf['base']+"_CCUBE.fits",
self.commonConf['base']+"_ltcube.fits",
self.commonConf['base']+"_BinnedExpMap.fits",
self.commonConf['base']+"_SC.fits",])
except(qU.FileNotFound):
self.logger.critical("One or more needed files do not exist")
sys.exit()
srcMaps['scfile'] = self.commonConf['base']+"_SC.fits"
srcMaps['expcube'] = self.commonConf['base']+"_ltcube.fits"
srcMaps['cmap'] = self.commonConf['base']+"_CCUBE.fits"
srcMaps['srcmdl'] = self.commonConf['base']+"_model.xml"
srcMaps['bexpmap'] = self.commonConf['base']+"_BinnedExpMap.fits"
srcMaps['outfile'] = self.commonConf['base']+"_srcMaps.fits"
srcMaps['irfs'] = self.commonConf['irfs']
srcMaps['rfactor'] = 4
srcMaps['emapbnds'] = "yes"
qU.runCommand(srcMaps,self.logger,run)
def runSelect(self,run = True,printCmd=False, **kwargs):
"""Runs gtselect on the data using the initialization
parameters. User selected parameters include the conversion
type and the eventclass."""
filter['rad'] = self.analysisConf['rad']
filter['evclass'] = self.commonConf['eventclass']
filter['evclsmin'] = 0
filter['evclsmax'] = 10
filter['infile'] = "@"+self.commonConf['base']+".list"
filter['outfile'] = self.commonConf['base']+"_filtered.fits"
filter['ra'] = self.analysisConf['ra']
filter['dec'] = self.analysisConf['dec']
filter['tmin'] = self.analysisConf['tmin']
filter['tmax'] = self.analysisConf['tmax']
filter['emin'] = self.analysisConf['emin']
filter['emax'] = self.analysisConf['emax']
filter['zmax'] = self.analysisConf['zmax']
filter['convtype'] = self.analysisConf['convtype']
#Override the settings above with the kwargs if they exist.
for name,value in kwargs.items():
filter[name] = value
qU.runCommand(filter,self.logger,run,printCmd)
def runExpMap(self, run=True):
"""Generates an exposure map that is 10 degrees larger than
the ROI and has 120 pixels in each direction."""
expMap['evfile'] = self.commonConf['base']+'_filtered_gti.fits'
expMap['scfile'] = self.commonConf['base']+'_SC.fits'
expMap['expcube'] = self.commonConf['base']+'_ltcube.fits'
expMap['outfile'] = self.commonConf['base']+'_expMap.fits'
expMap['irfs'] = self.commonConf['irfs']
expMap['srcrad'] = float(self.analysisConf['rad']) + 10.
expMap['nlong'] = 120
expMap['nlat'] = 120
expMap['nenergies'] = 20
np = int(self.commonConf['multicore'])
if(np > 0):
import gtexpmap_mp as expmp
expmp.gtexpmap_mp(expMap['nlong'],expMap['nlat'],np,1,
expMap['scfile'],expMap['evfile'],expMap['expcube'],
expMap['irfs'],expMap['srcrad'],expMap['nenergies'],
expMap['outfile'],False)
else:
qU.runCommand(expMap,self.logger,run)
def runSelect(self,run = True,printCmd=False, **kwargs):
"""Runs gtselect on the data using the initialization
parameters. User selected parameters include the conversion
type and the eventclass."""
filter['rad'] = self.analysisConf['rad']
filter['evclass'] = self.commonConf['eventclass']
filter['evclsmin'] = 0
filter['evclsmax'] = 10
filter['infile'] = "@"+self.commonConf['base']+".list"
filter['outfile'] = self.commonConf['base']+"_filtered.fits"
filter['ra'] = self.analysisConf['ra']
filter['dec'] = self.analysisConf['dec']
filter['tmin'] = self.analysisConf['tmin']
filter['tmax'] = self.analysisConf['tmax']
filter['emin'] = self.analysisConf['emin']
filter['emax'] = self.analysisConf['emax']
filter['zmax'] = self.analysisConf['zmax']
filter['convtype'] = self.analysisConf['convtype']
#Override the settings above with the kwargs if they exist.
for name,value in kwargs.items():
filter[name] = value
qU.runCommand(filter,self.logger,run,printCmd)
def runExpMap(self, run=True, **kwargs):
"""Generates an exposure map that is 10 degrees larger than
the ROI and has 120 pixels in each direction."""
expMap['evfile'] = self.commonConf['base']+'_filtered_gti.fits'
expMap['scfile'] = self.commonConf['base']+'_SC.fits'
expMap['expcube'] = self.commonConf['base']+'_ltcube.fits'
expMap['outfile'] = self.commonConf['base']+'_expMap.fits'
expMap['irfs'] = self.commonConf['irfs']
expMap['srcrad'] = float(self.analysisConf['rad']) + 10.
expMap['nlong'] = 120
expMap['nlat'] = 120
expMap['nenergies'] = 20
#Override the settings above with the kwargs if they exist.
for name,value in kwargs.items():
expMap[name] = value
np = int(self.commonConf['multicore'])
if(np > 0):
import gtexpmap_mp as expmp
expmp.gtexpmap_mp(expMap['nlong'],expMap['nlat'],np,1,
expMap['scfile'],expMap['evfile'],expMap['expcube'],
expMap['irfs'],expMap['srcrad'],expMap['nenergies'],
expMap['outfile'],False)
else:
qU.runCommand(expMap,self.logger,run)
def runSrcMaps(self, run=True, makeModel=True, **kwargs):
"""Generates a source map for your region. Checks to make
sure that there's an XML model to be had and if not, creates
one from the 2FGL."""
if makeModel:
self.generateXMLmodel()
"""
# This clashes with quickCurve. If you want this functionality back, put it in runAll() and the cli
try:
qU.checkForFiles(self.logger,[self.commonConf['base']+"_CCUBE.fits",
self.commonConf['base']+"_ltcube.fits",
self.commonConf['base']+"_BinnedExpMap.fits",
self.commonConf['base']+"_SC.fits",])
except(qU.FileNotFound):
self.logger.critical("One or more needed files do not exist")
sys.exit()"""
srcMaps['scfile'] = self.commonConf['base']+"_SC.fits"
srcMaps['expcube'] = self.commonConf['base']+"_ltcube.fits"
srcMaps['cmap'] = self.commonConf['base']+"_CCUBE.fits"
srcMaps['srcmdl'] = self.commonConf['base']+"_model.xml"
srcMaps['bexpmap'] = self.commonConf['base']+"_BinnedExpMap.fits"
srcMaps['outfile'] = self.commonConf['base']+"_srcMaps.fits"
srcMaps['irfs'] = self.commonConf['irfs']
srcMaps['rfactor'] = 4
srcMaps['emapbnds'] = "yes"
#Override settings from kwargs if they exist
for name, value in kwargs.items():
srcMaps[name] = value
qU.runCommand(srcMaps,self.logger,run)
def runSrcMaps(self, run=True):
"""Generates a source map for your region. Checks to make
sure that there's an XML model to be had and if not, creates
one from the 2FGL."""
self.generateXMLmodel()
try:
qU.checkForFiles(self.logger,[self.commonConf['base']+"_CCUBE.fits",
self.commonConf['base']+"_ltcube.fits",
self.commonConf['base']+"_BinnedExpMap.fits",
self.commonConf['base']+"_SC.fits",])
except(qU.FileNotFound):
self.logger.critical("One or more needed files do not exist")
sys.exit()
srcMaps['scfile'] = self.commonConf['base']+"_SC.fits"
srcMaps['expcube'] = self.commonConf['base']+"_ltcube.fits"
srcMaps['cmap'] = self.commonConf['base']+"_CCUBE.fits"
srcMaps['srcmdl'] = self.commonConf['base']+"_model.xml"
srcMaps['bexpmap'] = self.commonConf['base']+"_BinnedExpMap.fits"
srcMaps['outfile'] = self.commonConf['base']+"_srcMaps.fits"
srcMaps['irfs'] = self.commonConf['irfs']
srcMaps['rfactor'] = 4
srcMaps['emapbnds'] = "yes"
qU.runCommand(srcMaps,self.logger,run)
def runCCUBE(self, run=True,nbins=30):
"""Generates a counts cube. The dimensions of which are the
largest square subtended by the ROI. Note that if the ROI is
exceptionally small or the bin size exceptionally large, the
square might not be the largest posible since the npix
calculation floors the calculated value. The number of energy
bins is logarithmic and is defined by the nbins variable."""
if nxpix < 0 or nypix < 0:
nxpix = NumberOfPixels(float(rad),float(binsize))
nypix = NumberOfPixels(float(rad),float(binsize))
evtbin['evfile'] = self.commonConf['base']+'_filtered_gti.fits'
evtbin['outfile'] = self.commonConf['base']+'_CCUBE.fits'
evtbin['algorithm'] = 'CCUBE'
evtbin['nxpix'] = self.analysisConf['nxpix']
evtbin['nypix'] = self.analysisConf['nypix']
evtbin['binsz'] = self.analysisConf['binsize']
evtbin['coordsys'] = 'CEL'
evtbin['xref'] = self.analysisConf['ra']
evtbin['yref'] = self.analysisConf['dec']
evtbin['axisrot'] = 0
evtbin['proj'] = 'AIT'
evtbin['ebinalg'] = 'LOG'
evtbin['emin'] = self.analysisConf['emin']
evtbin['emax'] = self.analysisConf['emax']
evtbin['enumbins'] = nbins
evtbin['scfile'] = self.commonConf['base']+"_SC.fits"
qU.runCommand(evtbin,self.logger,run)
def runCCUBE(self, run=True,nbins=30):
"""Generates a counts cube. The dimensions of which are the
largest square subtended by the ROI. Note that if the ROI is
exceptionally small or the bin size exceptionally large, the
square might not be the largest posible since the npix
calculation floors the calculated value. The number of energy
bins is logarithmic and is defined by the nbins variable."""
if float(self.analysisConf['nxpix']) < 0 or float(self.analysisConf['nypix']) < 0:
self.logger.info("Autocalculating nxpix and nypix.")
self.analysisConf['nxpix'] = qU.NumberOfPixels(float(self.analysisConf['rad']),
float(self.analysisConf['binsize']))
self.analysisConf['nypix'] = self.analysisConf['nxpix']
print self.analysisConf['nypix']
evtbin['evfile'] = self.commonConf['base']+'_filtered_gti.fits'
evtbin['outfile'] = self.commonConf['base']+'_CCUBE.fits'
evtbin['algorithm'] = 'CCUBE'
evtbin['nxpix'] = self.analysisConf['nxpix']
evtbin['nypix'] = self.analysisConf['nypix']
evtbin['binsz'] = self.analysisConf['binsize']
evtbin['coordsys'] = 'CEL'
evtbin['xref'] = self.analysisConf['ra']
evtbin['yref'] = self.analysisConf['dec']
evtbin['axisrot'] = 0
evtbin['proj'] = 'AIT'
evtbin['ebinalg'] = 'LOG'
evtbin['emin'] = self.analysisConf['emin']
evtbin['emax'] = self.analysisConf['emax']
evtbin['enumbins'] = nbins
evtbin['scfile'] = self.commonConf['base']+"_SC.fits"
qU.runCommand(evtbin,self.logger,run)
def runExpMap(self, run=True, **kwargs):
"""Generates an exposure map that is 10 degrees larger than
the ROI and has 120 pixels in each direction."""
expMap['evfile'] = self.commonConf['base']+'_filtered_gti.fits'
expMap['scfile'] = self.commonConf['base']+'_SC.fits'
expMap['expcube'] = self.commonConf['base']+'_ltcube.fits'
expMap['outfile'] = self.commonConf['base']+'_expMap.fits'
expMap['irfs'] = self.commonConf['irfs']
expMap['srcrad'] = float(self.analysisConf['rad']) + 10.
expMap['nlong'] = 120
expMap['nlat'] = 120
expMap['nenergies'] = 20
#Override the settings above with the kwargs if they exist.
for name,value in kwargs.items():
expMap[name] = value
np = int(self.commonConf['multicore'])
if(np > 0):
import gtexpmap_mp as expmp
expmp.gtexpmap_mp(expMap['nlong'],expMap['nlat'],np,1,
expMap['scfile'],expMap['evfile'],expMap['expcube'],
expMap['irfs'],expMap['srcrad'],expMap['nenergies'],
expMap['outfile'],False)
else:
qU.runCommand(expMap,self.logger,run)
def runGTI(self, run = True, filterString="DATA_QUAL==1 && LAT_CONFIG==1 && ABS(ROCK_ANGLE)<52",roi = 'yes'):
"""Executes gtmktime with the given filter"""
maketime['scfile'] = self.commonConf['base']+'_SC.fits'
maketime['filter'] = filterString
maketime['roicut'] = roi
maketime['evfile'] = self.commonConf['base']+'_filtered.fits'
maketime['outfile'] = self.commonConf['base']+'_filtered_gti.fits'
qU.runCommand(maketime,self.logger,run)
def runDIFRSP(self, run = True, **kwargs):
"""Executes gtdiffrsp with the given arguments"""
diffResps['evfile'] = self.commonConf['base']+'_filtered_gti.fits'
diffResps['scfile'] = self.commonConf['base']+'_SC.fits'
diffResps['srcmdl'] = self.analysisConf['model']
diffResps['irfs'] = self.commonConf['irfs']
#Override the settings above with the kwargs if they exist.
for name,value in kwargs.items():
diffResps[name] = value
qU.runCommand(diffResps,self.logger,run)
def runGTI(self, run = True, **kwargs):
"""Executes gtmktime with the given filter"""
maketime['scfile'] = self.commonConf['base']+'_SC.fits'
maketime['filter'] = self.analysisConf['filter']
maketime['roicut'] = self.analysisConf['roicut']
maketime['evfile'] = self.commonConf['base']+'_filtered.fits'
maketime['outfile'] = self.commonConf['base']+'_filtered_gti.fits'
#Override the settings above with the kwargs if they exist.
for name,value in kwargs.items():
maketime[name] = value
qU.runCommand(maketime,self.logger,run)
def runGTI(self, run = True, **kwargs):
"""Executes gtmktime with the given filter"""
maketime['scfile'] = self.commonConf['base']+'_SC.fits'
maketime['filter'] = self.analysisConf['filter']
maketime['roicut'] = self.analysisConf['roicut']
maketime['evfile'] = self.commonConf['base']+'_filtered.fits'
maketime['outfile'] = self.commonConf['base']+'_filtered_gti.fits'
#Override the settings above with the kwargs if they exist.
for name,value in kwargs.items():
maketime[name] = value
qU.runCommand(maketime,self.logger,run)
def runLTCube(self, run=True, zmax=180):
"""Generates a livetime cube"""
expCube['evfile'] = self.commonConf['base']+'_filtered_gti.fits'
expCube['scfile'] = self.commonConf['base']+'_SC.fits'
expCube['outfile'] = self.commonConf['base']+'_ltcube.fits'
expCube['dcostheta'] = 0.025
expCube['binsz'] = 1
expCube['zmax'] = zmax
np = int(self.commonConf['multicore'])
if(np > 0):
import gtltcube_mp as ltmp
ltmp.gtltcube_mp(np, expCube['scfile'], expCube['evfile'], expCube['outfile'],False,expCube['zmax'])
else:
qU.runCommand(expCube,self.logger,run)
def runCCUBE(self, run=True,nbins=30, **kwargs):
"""Generates a counts cube. The dimensions of which are the
largest square subtended by the ROI. Note that if the ROI is
exceptionally small or the bin size exceptionally large, the
square might not be the largest posible since the npix
calculation floors the calculated value. The number of energy
bins is logarithmic and is defined by the nbins variable."""
if float(self.analysisConf['nxpix']) < 0 or float(self.analysisConf['nypix']) < 0:
self.logger.info("Autocalculating nxpix and nypix.")
self.analysisConf['nxpix'] = qU.NumberOfPixels(float(self.analysisConf['rad']),
float(self.analysisConf['binsize']))
self.analysisConf['nypix'] = self.analysisConf['nxpix']
print self.analysisConf['nypix']
evtbin['evfile'] = self.commonConf['base']+'_filtered_gti.fits'
evtbin['outfile'] = self.commonConf['base']+'_CCUBE.fits'
evtbin['algorithm'] = 'CCUBE'
evtbin['nxpix'] = self.analysisConf['nxpix']
evtbin['nypix'] = self.analysisConf['nypix']
evtbin['binsz'] = self.analysisConf['binsize']
evtbin['coordsys'] = 'CEL'
evtbin['xref'] = self.analysisConf['ra']
evtbin['yref'] = self.analysisConf['dec']
evtbin['axisrot'] = 0
evtbin['proj'] = self.analysisConf['proj']
evtbin['ebinalg'] = 'LOG'
evtbin['emin'] = self.analysisConf['emin']
evtbin['emax'] = self.analysisConf['emax']
evtbin['enumbins'] = nbins
evtbin['scfile'] = self.commonConf['base']+"_SC.fits"
#Override settings above with kwargs if they exist
for name, value in kwargs.items():
evtbin[name] = value
qU.runCommand(evtbin,self.logger,run)
def runSelect(self,run = True, printCmd=False):
"""Runs gtselect on the data using the initialization
parameters. User selected parameters include the conversion
type and the eventclass."""
filter['rad'] = self.analysisConf['rad']
filter['evclass'] = self.commonConf['eventclass']
filter['evclsmin'] = 0
filter['evclsmax'] = 10
filter['infile'] = "@"+self.commonConf['base']+".list"
filter['outfile'] = self.commonConf['base']+"_filtered.fits"
filter['ra'] = self.analysisConf['ra']
filter['dec'] = self.analysisConf['dec']
filter['tmin'] = self.analysisConf['tmin']
filter['tmax'] = self.analysisConf['tmax']
filter['emin'] = self.analysisConf['emin']
filter['emax'] = self.analysisConf['emax']
filter['zmax'] = self.analysisConf['zmax']
filter['convtype'] = self.analysisConf['convtype']
qU.runCommand(filter,self.logger,run,printCmd)
def runLTCube(self, run=True, **kwargs):
"""Generates a livetime cube"""
expCube['evfile'] = self.commonConf['base']+'_filtered_gti.fits'
expCube['scfile'] = self.commonConf['base']+'_SC.fits'
expCube['outfile'] = self.commonConf['base']+'_ltcube.fits'
expCube['dcostheta'] = 0.025
expCube['binsz'] = 1
expCube['zmax'] = self.analysisConf['ltzmax']
#Override the settings above with the kwargs if they exist.
for name,value in kwargs.items():
expCube[name] = value
np = int(self.commonConf['multicore'])
if(np > 0):
import gtltcube_mp as ltmp
ltmp.gtltcube_mp(np, expCube['scfile'], expCube['evfile'], expCube['outfile'],
False,expCube['zmax'], 0, 0)
else:
qU.runCommand(expCube,self.logger,run)
def runLTCube(self, run=True, **kwargs):
"""Generates a livetime cube"""
expCube['evfile'] = self.commonConf['base']+'_filtered_gti.fits'
expCube['scfile'] = self.commonConf['base']+'_SC.fits'
expCube['outfile'] = self.commonConf['base']+'_ltcube.fits'
expCube['dcostheta'] = 0.025
expCube['binsz'] = 1
expCube['zmax'] = self.analysisConf['ltzmax']
#Override the settings above with the kwargs if they exist.
for name,value in kwargs.items():
expCube[name] = value
np = int(self.commonConf['multicore'])
if(np > 0):
import gtltcube_mp as ltmp
ltmp.gtltcube_mp(np, expCube['scfile'], expCube['evfile'], expCube['outfile'],
False,expCube['zmax'], 0, 0)
else:
qU.runCommand(expCube,self.logger,run)
def runExpCube(self,run=True,nbins=30, ExpBuffer=30, **kwargs):
"""Generates a binned exposure map that is 30 degrees larger
than the ROI. The binned exposure map needs to take into
account the exposure on sources outside of the ROI. 30
degrees is the size of the PSF at low energies plus some extra
tens of degrees for security. You can adjust this buffer by
setting the ExpBuffer option. The energy binning is
logarithmic and the number of energy bins is defined by the
nbins variable."""
npix = qU.NumberOfPixels(float(self.analysisConf['rad'])+ExpBuffer, float(self.analysisConf['binsize']))
gtexpcube2['infile'] = self.commonConf['base']+"_ltcube.fits"
gtexpcube2['cmap'] = self.commonConf['base']+'_CCUBE.fits'
gtexpcube2['outfile'] = self.commonConf['base']+"_BinnedExpMap.fits"
gtexpcube2['irfs'] = self.commonConf['irfs']
gtexpcube2['xref'] = str(self.analysisConf['ra'])
gtexpcube2['yref'] = str(self.analysisConf['dec'])
gtexpcube2['nxpix'] = str(npix)
gtexpcube2['nypix'] = str(npix)
gtexpcube2['binsz'] = str(self.analysisConf['binsize'])
gtexpcube2['coordsys'] = "CEL"
gtexpcube2['axisrot'] = 0
gtexpcube2['proj'] = str(self.analysisConf['proj'])
gtexpcube2['ebinalg'] = "LOG"
gtexpcube2['emin'] = str(self.analysisConf['emin'])
gtexpcube2['emax'] = str(self.analysisConf['emax'])
gtexpcube2['enumbins'] = str(nbins)
#Override settings above with kwargs if they exist
for name, value in kwargs.items():
gtexpcube2[name] = value
qU.runCommand(gtexpcube2, self.logger, run)
"""
