def test_copy(self):
"""
Should create a copy of the database.
"""
db0 = PickDatabaseConnection(':memory:')
for pick in uniq_picks:
db0.add_pick(**pick)
db1 = db0.copy()
self.assertEqual(db0.get_picks()[0], db1.get_picks()[0])
class MenusTestCase(unittest.TestCase):
"""
Master suite for testing the menu classes.
"""
def setUp(self):
"""
Setup benchmark data.
"""
self.segy = readSEGY(get_example_file("ew0210_o30.segy"), unpack_headers=True)
self.pickdb = PickDatabaseConnection(":memory:")
for pick in uniq_picks:
self.pickdb.update_pick(**pick)
def setUp(self):
"""
Setup benchmark data.
"""
self.segy = readSEGY(get_example_file("ew0210_o30.segy"), unpack_headers=True)
self.pickdb = PickDatabaseConnection(":memory:")
for pick in uniq_picks:
self.pickdb.update_pick(**pick)
def test_raytrace_branch_id(self):
"""
Raytracing should honor branch ids
"""
#vmfile = get_example_file('jump1d.vm')
vmfile = get_example_file('inactive_layers.vm')
# Create pick database
pickdbfile = 'temp.sqlite'
if os.path.isfile(pickdbfile):
os.remove(pickdbfile)
pickdb = PickDatabaseConnection(pickdbfile)
pickdb.update_pick(event='P1', ensemble=100, trace=1,
branch=1, subbranch=0,
time=5.0, source_x=10, source_y=0.0, source_z=0.006,
receiver_x=40, receiver_y=0.0, receiver_z=4.9)
pickdb.update_pick(event='P2', ensemble=100, trace=1,
branch=2, subbranch=0, time=5.0)
pickdb.update_pick(event='P3', ensemble=100, trace=1,
branch=3, subbranch=0, time=5.0)
pickdb.commit()
# Raytrace
vm = readVM(vmfile)
rayfile = 'temp.ray'
for branch in range(1, 4):
if os.path.isfile(rayfile):
os.remove(rayfile)
pick_keys = {'branch' : branch}
raytrace(vmfile, pickdb, rayfile, **pick_keys)
# Should have created a rayfile
self.assertTrue(os.path.isfile(rayfile))
# Load rayfans
rays = readRayfanGroup(rayfile)
# Should have traced just one ray
self.assertEqual(len(rays.rayfans), 1)
rfn = rays.rayfans[0]
self.assertEqual(len(rfn.paths), 1)
# Rays should turn in specified layer
zmax = max([p[2] for p in rfn.paths[0]])
self.assertGreaterEqual(zmax, vm.rf[branch - 1][0][0])
# cleanup
for filename in [rayfile, pickdbfile]:
if os.path.isfile(filename):
os.remove(filename)
def test_plot_picks(self):
"""
Should add picks to an axes and the layer managers.
"""
fig = plt.figure()
ax = fig.add_subplot(111)
pickdb = PickDatabaseConnection(':memory:')
for pick in uniq_picks:
pickdb.update_pick(**pick)
splt = SEGYPickPlotter(ax, self.segy, pickdb)
# should add a single artist to the line dict. for each event
splt.plot_picks()
for event in self.pickdb.events:
self.assertTrue(len(splt.ACTIVE_LINES[event]), 1)
# should be able to add new picks and have them be accessible by the
# SEGYPickPlotter
new_event = '--tracer--'
new_pick = copy.copy(uniq_picks[0])
new_pick['event'] = new_event
pickdb.update_pick(**new_pick)
splt.plot_picks()
self.assertTrue(new_event in splt.ACTIVE_LINES)
def test_parallel_raytrace(self):
"""
Should run raytracing in parallel
"""
# Create pick database
pickdbfile = 'temp.sqlite'
if os.path.isfile(pickdbfile):
os.remove(pickdbfile)
pickdb = PickDatabaseConnection(pickdbfile)
for i, event in enumerate( ['P1', 'P2', 'P3']):
branch = i + 1
for ens in range(3):
pickdb.update_pick(event=event, ensemble=ens, trace=1,
branch=branch, subbranch=0,
time=5.0, source_x=10, source_y=0.0,
source_z=0.006, receiver_x=40,
receiver_y=0.0, receiver_z=4.9)
pickdb.commit()
# set velocity model
vmfile = get_example_file('inactive_layers.vm')
# raytrace
for nproc in [1, 2, 8]:
input_dir = 'test.input'
output_dir = 'test.output'
t_start = time.clock()
parallel_raytrace(vmfile, pickdb, branches=[1, 2, 3],
input_dir=input_dir, output_dir=output_dir,
nproc=nproc, ensemble_field='ensemble')
t_elapsed = time.clock() - t_start
shutil.rmtree(input_dir)
shutil.rmtree(output_dir)
os.remove(pickdbfile)
def test_locate_on_surface(self):
"""
Should locate a receiver on a surface.
"""
inst_id = 100
dx = 1
iref = 0
for _vmfile in TEST_MODELS:
vmfile = get_example_file(_vmfile)
vm = readVM(vmfile)
# calculate synthetic times
pickdb = PickDatabaseConnection(':memory:')
x0 = np.mean(vm.x)
y0 = np.mean(vm.y)
picks = []
xsearch = vm.xrange2i(max(vm.r1[0], x0 - dx),
min(vm.r2[0], x0 + dx))
for i, ix in enumerate(xsearch):
x = vm.x[ix]
iy = vm.x2i([y0])[0]
z0 = vm.rf[iref][ix][iy]
pickdb.add_pick(event='Pw', ensemble=inst_id,
trace=i, time=1e30,
source_x=x, source_y=y0, source_z=0.006,
receiver_x=x0, receiver_y=y0, receiver_z=z0,
vm_branch=1, vm_subid=0)
rayfile = 'temp.ray'
raytrace(vmfile, pickdb, rayfile)
raydb = rayfan2db(rayfile, 'temp.syn.sqlite', synthetic=True)
os.remove(rayfile)
# run locate
x, y, z, rms = locate_on_surface(vmfile, raydb, 0, x0=x0,
y0=y0, dx=dx, dy=dx)
# compare result
self.assertAlmostEqual(x, x0, 0)
self.assertAlmostEqual(y, y0, 0)
def setUp(self):
"""
Setup benchmark data.
"""
self.segy = readSEGY(get_example_file('ew0210_o30.segy'),
unpack_headers=True)
self.pickdb = PickDatabaseConnection(':memory:')
for pick in uniq_picks:
self.pickdb.update_pick(**pick)
self.default_params = [
'ABSCISSA_KEY', 'GAIN', 'CLIP',
'NORMALIZATION_METHOD', 'OFFSET_GAIN_POWER',
'WIGGLE_PEN_COLOR', 'WIGGLE_PEN_WIDTH',
'NEG_FILL_COLOR', 'POS_FILL_COLOR', 'DISTANCE_UNIT',
'TIME_UNIT', 'SEGY_TIME_UNITS', 'SEGY_DISTANCE_UNITS',
'SEGY_HEADER_ALIASES']
def test_get_events(self):
"""
Should return a list of event names in the database.
"""
pickdb = PickDatabaseConnection(':memory:')
# add picks and get our own list of event names
events = []
for i, pick in enumerate(uniq_picks):
pickdb.add_pick(**pick)
if pick['event'] not in events:
events.append(pick['event'])
# private function should return a list of events
self.assertEqual(sorted(pickdb._get_events()),
sorted(events))
# public 'events' attribute should be a property with
# setfunction=_get_events
self.assertEqual(pickdb.events,
pickdb._get_events())
# should return empty list for empty database
pickdb = PickDatabaseConnection(':memory:')
self.assertEqual(pickdb.events, [])
pickdb_file = 'synthetic.sqlite'
# Cleanup from any earlier run
for filename in [vmfile, temp_pickdb_file, rayfile, pickdb_file]:
if os.path.isfile(filename):
os.remove(filename)
# Create a simple 1D model
vm = VM(r1=(0, 0, 0), r2=(100, 0, 15), dx=0.5, dy=1, dz=0.1)
vm.insert_interface(np.asarray([[z] for z in 2.0 * np.ones((vm.nx))]))
vm.define_constant_layer_velocity(0, 1.5)
vm.define_stretched_layer_velocities(1, [1.5, 4.0, 6.5, 8.0, 8.5])
vm.write(vmfile)
# Create a pickdb to define source/receiver geometry
pickdb = PickDatabaseConnection(temp_pickdb_file)
sx = np.arange(1., 80., 1.)
rx = [1.]
for irec, _rx in enumerate(rx):
for isrc, _sx in enumerate(sx):
d = {'event': 'Pg',
'vm_branch': 1,
'vm_subid': 0,
'ensemble': irec + 10,
'trace': isrc + 5000,
'time': 0.0,
'time_reduced': 0.0,
'source_x': _sx,
'source_y': 0.0,
'source_z': 1.0,
'receiver_x': _rx,
from rockfish.picking.database import PickDatabaseConnection
from rockfish.vmtomo.vm import VMFile
from rockfish.vmtomo.rayfan import RayfanFile
from rockfish.vmtomo.raytracing import trace
cleanup = True
# Set filenames for model, pick database, etc.
pickdbfile = 'temp.pickdb.sqlite'
vmfile = '../tests/data/goc_l26.15.00.vm'
#vmfile = '../tests/data/cranis_northeast.00.00.vm'
input_dir = 'temp.input'
rayfile = 'temp.ray'
# Build an example pick database
pickdb = PickDatabaseConnection(pickdbfile)
pickdb.add_pick(event='Pg', ensemble=100, trace=1,
vm_branch=3, vm_subid=0,
time=5.0, time_reduced=5.0,
source_x=50, source_y=0.0, source_z=0.006,
receiver_x=100, receiver_y=0.0, receiver_z=2)
pickdb.commit()
# Raytrace the model
trace(vmfile, pickdb, rayfile, input_dir=input_dir, cleanup=False)
# Plot model and rays
fig = plt.figure()
ax = fig.add_subplot(311)
vm = VMFile(vmfile)
vm.plot(ax=ax)
class SEGYPlotterTestCase(unittest.TestCase):
"""
Test cases for SEGYPlotter and SEGYPickPlotter
"""
def setUp(self):
"""
Setup benchmark data.
"""
self.segy = readSEGY(get_example_file('ew0210_o30.segy'),
unpack_headers=True)
self.pickdb = PickDatabaseConnection(':memory:')
for pick in uniq_picks:
self.pickdb.update_pick(**pick)
def test_init_SEGYPlotter(self):
"""
Should create a new instance of the SEGYPlotter.
"""
fig = plt.figure()
ax = fig.add_subplot(111)
splt = SEGYPlotter(ax, self.segy)
# should inherit from SEGYPlotManager
for member in inspect.getmembers(SEGYPlotManager):
self.assertTrue(hasattr(splt, member[0]))
# should *not* build header lookup table
self.assertFalse(hasattr(splt, 'sdb'))
# should attach axes
self.assertTrue(isinstance(splt.ax, matplotlib.axes.Axes))
def test_plot_negative_wiggle_fills(self):
"""
Should add negative wiggle fills to the axes.
"""
fig = plt.figure()
ax = fig.add_subplot(111)
splt = SEGYPlotter(ax, self.segy)
# should add a single artist to the active patch dict.
splt.plot_wiggles(negative_fills=True)
self.assertEqual(len(splt.ACTIVE_PATCHES['negative_fills']),1)
# same artist should be in the axes list
self.assertTrue(splt.ACTIVE_PATCHES['negative_fills'][0] in \
splt.ax.patches)
# should be able to directly remove it
splt.ax.patches.remove(splt.ACTIVE_PATCHES['negative_fills'][0])
self.assertEqual(len(splt.ax.patches), 0)
# and re-add it
splt.ax.patches.append(splt.ACTIVE_PATCHES['negative_fills'][0])
self.assertEqual(len(splt.ax.patches), 1)
# should move artist to the inactive patch dict.
splt.plot_wiggles(negative_fills=False)
self.assertEqual(len(splt.INACTIVE_PATCHES['negative_fills']),1)
self.assertEqual(len(splt.ax.patches), 0)
# calling again should change nothing
splt.plot_wiggles(negative_fills=False)
self.assertEqual(len(splt.INACTIVE_PATCHES['negative_fills']),1)
self.assertEqual(len(splt.ax.patches), 0)
# should move artist back to active patch dict.
splt.plot_wiggles(negative_fills=True)
self.assertEqual(len(splt.ACTIVE_PATCHES['negative_fills']),1)
self.assertEqual(len(splt.ax.patches), 1)
# new plot items should be accessible through the orig. axes
self.assertEqual(len(splt.ax.patches),
len(ax.patches))
def test_plot_positive_wiggle_fills(self):
"""
Should add positive wiggle fills to the axes.
"""
fig = plt.figure()
ax = fig.add_subplot(111)
splt = SEGYPlotter(ax, self.segy)
# should add a single artist to the active patch dict.
splt.plot_wiggles(positive_fills=True)
self.assertEqual(len(splt.ACTIVE_PATCHES['positive_fills']),1)
# same artist should be in the axes list
self.assertTrue(splt.ACTIVE_PATCHES['positive_fills'][0] in \
splt.ax.patches)
# should be able to directly remove it
splt.ax.patches.remove(splt.ACTIVE_PATCHES['positive_fills'][0])
self.assertEqual(len(splt.ax.patches), 0)
# and re-add it
splt.ax.patches.append(splt.ACTIVE_PATCHES['positive_fills'][0])
self.assertEqual(len(splt.ax.patches), 1)
# should move artist to the inactive patch dict.
splt.plot_wiggles(positive_fills=False)
self.assertEqual(len(splt.INACTIVE_PATCHES['positive_fills']),1)
self.assertEqual(len(splt.ax.patches), 0)
# calling again should change nothing
splt.plot_wiggles(positive_fills=False)
self.assertEqual(len(splt.INACTIVE_PATCHES['positive_fills']),1)
self.assertEqual(len(splt.ax.patches), 0)
# should move artist back to active patch dict.
splt.plot_wiggles(positive_fills=True)
self.assertEqual(len(splt.ACTIVE_PATCHES['positive_fills']),1)
self.assertEqual(len(splt.ax.patches), 1)
# new plot items should be accessible through the orig. axes
self.assertEqual(len(splt.ax.patches),
len(ax.patches))
def test_plot_wiggle_traces(self):
"""
Should add wiggle traces to the axes.
"""
fig = plt.figure()
ax = fig.add_subplot(111)
splt = SEGYPlotter(ax, self.segy)
# should add a single artist to the active line dict.
splt.plot_wiggles(wiggle_traces=True)
self.assertEqual(len(splt.ACTIVE_LINES['wiggle_traces']),1)
# same artist should be in the axes list
self.assertTrue(splt.ACTIVE_LINES['wiggle_traces'][0] in \
splt.ax.lines)
# should be able to directly remove it
splt.ax.lines.remove(splt.ACTIVE_LINES['wiggle_traces'][0])
self.assertEqual(len(splt.ax.lines), 0)
# and re-add it
splt.ax.lines.append(splt.ACTIVE_LINES['wiggle_traces'][0])
self.assertEqual(len(splt.ax.lines), 1)
# should move artist to the inactive line dict.
splt.plot_wiggles(wiggle_traces=False)
self.assertEqual(len(splt.INACTIVE_LINES['wiggle_traces']),1)
self.assertEqual(len(splt.ax.lines), 0)
# calling again should change nothing
splt.plot_wiggles(wiggle_traces=False)
self.assertEqual(len(splt.INACTIVE_LINES['wiggle_traces']),1)
self.assertEqual(len(splt.ax.lines), 0)
# should move artist back to active line dict and re-add to axes
splt.plot_wiggles(wiggle_traces=True)
self.assertEqual(len(splt.ACTIVE_LINES['wiggle_traces']),1)
self.assertEqual(len(splt.ax.lines), 1)
# new plot items should be accessible through the orig. axes
self.assertEqual(len(splt.ax.lines),
len(ax.lines))
def test_link_axes(self):
"""
Plotting should update items in the linked axes.
"""
fig = plt.figure()
ax = fig.add_subplot(111)
splt = SEGYPlotter(ax, self.segy)
# should add one artist to our axes
splt.plot_wiggles(wiggle_traces=True)
self.assertEqual(len(splt.ACTIVE_LINES['wiggle_traces']), 1)
self.assertTrue('wiggle_traces' not in splt.INACTIVE_LINES)
self.assertEqual(len(ax.lines), 1)
# should remove one artist to our axes
splt.plot_wiggles(wiggle_traces=False)
self.assertTrue('wiggle_traces' not in splt.ACTIVE_LINES)
self.assertEqual(len(splt.INACTIVE_LINES['wiggle_traces']), 1)
self.assertEqual(len(ax.lines), 0)
def test_init_SEGYPickPlotter(self):
"""
Should create a new instance of the SEGYPickPlotter.
"""
fig = plt.figure()
ax = fig.add_subplot(111)
splt = SEGYPickPlotter(ax, self.segy, pickdb=self.pickdb)
# should inherit from SEGYPlotter
for member in inspect.getmembers(SEGYPlotter):
self.assertTrue(hasattr(splt, member[0]))
# should build header lookup table
self.assertTrue(isinstance(splt.sdb, SEGYHeaderDatabase))
# should attach axes
self.assertTrue(isinstance(splt.ax, matplotlib.axes.Axes))
def test_plot_picks(self):
"""
Should add picks to an axes and the layer managers.
"""
fig = plt.figure()
ax = fig.add_subplot(111)
pickdb = PickDatabaseConnection(':memory:')
for pick in uniq_picks:
pickdb.update_pick(**pick)
splt = SEGYPickPlotter(ax, self.segy, pickdb)
# should add a single artist to the line dict. for each event
splt.plot_picks()
for event in self.pickdb.events:
self.assertTrue(len(splt.ACTIVE_LINES[event]), 1)
# should be able to add new picks and have them be accessible by the
# SEGYPickPlotter
new_event = '--tracer--'
new_pick = copy.copy(uniq_picks[0])
new_pick['event'] = new_event
pickdb.update_pick(**new_pick)
splt.plot_picks()
self.assertTrue(new_event in splt.ACTIVE_LINES)
def rayfan2db(rayfan_file, raydb_file=':memory:', synthetic=False, noise=None,
pickdb=None, raypaths=False):
"""
Read a rayfan file and store its data in a database.
Data are stored in a modified version of a
:class:`rockfish.picking.database.PickDatabaseConnection`.
Parameters
----------
rayfan_file: {str, file}
An open file-like object or a string which is assumed to be a
filename of a rayfan binary file.
raydb_file: str, optional
The filename of the new database. Default is to create
a new database in memory.
synthetic: bool, optional
Determines whether or not to record traced traveltimes as picked
traveltimes.
noise: {float, None}
Maximum amplitude of random noise to add the travel times. If
``None``, no noise is added.
pickdb: :class:`rockfish.database.PickDatabaseConnection`, optional
An active connection to the pick database that was used
trace rays in ``rayfan_file``. Values for extra fields (e.g.,
'trace_in_file') are copied from this database to the new
database along with rayfan data. Default is ignore these extra fields.
raypaths: bool, optional
If ``True``, raypath coordinates are stored as text in a new table
'raypaths'.
"""
raydb = PickDatabaseConnection(raydb_file)
rays = readRayfanGroup(rayfan_file)
print "Adding {:} traveltimes to {:} ..."\
.format(rays.nrays, raydb_file)
# add fields for raypaths
if raypaths:
raydb._create_table_if_not_exists(RAYPATH_TABLE, RAYPATH_FIELDS)
ndb0 = raydb.execute('SELECT COUNT(rowid) FROM picks').fetchone()[0]
for rfn in rays.rayfans:
for i, _t in enumerate(rfn.travel_times):
if noise is not None:
_noise = noise * 2 * (np.random.random() - 0.5)
else:
_noise = 0.0
sx, sy, sz = rfn.paths[i][0]
rx, ry, rz = rfn.paths[i][-1]
if pickdb is not None:
event = pickdb.vmbranch2event[rfn.event_ids[i]]
else:
event = rfn.event_ids[i]
if synthetic:
time = rfn.travel_times[i] + _noise
time_reduced = time
predicted = None
residual = 0.
else:
time = rfn.pick_times[i]
time_reduced = time
predicted = rfn.travel_times[i]
residual = rfn.residuals[i]
d = {'event': event,
'ensemble': rfn.start_point_id,
'trace': rfn.end_point_ids[i],
'vm_branch': rfn.event_ids[i],
'vm_subid': rfn.event_subids[i],
'time' : time,
'time_reduced' : time_reduced,
'predicted' : predicted,
'residual' : residual,
'error': rfn.pick_errors[i],
'source_x': sx, 'source_y': sy, 'source_z': sz,
'receiver_x': rx, 'receiver_y': ry, 'receiver_z': rz,
'offset': rfn.offsets[i],
'faz': rfn.azimuths[i],
'method': 'rayfan2db({:})'.format(rayfan_file),
'data_file': rays.file.name}
# Copy data from pickdb
if pickdb is not None:
pick = pickdb.get_picks(event=[event],
ensemble=[d['ensemble']],
trace=[d['trace']])
if len(pick) > 0:
for f in ['trace_in_file', 'line', 'site', 'data_file']:
try:
d[f] = pick[0][f]
except KeyError:
pass
# add data to standard tables
raydb.update_pick(**d)
# add raypath data to new table
if raypaths:
d = {'event': event,
'ensemble': rfn.start_point_id,
'trace': rfn.end_point_ids[i],
'ray_btm_x': rays.bottom_points[i][0],
'ray_btm_y': rays.bottom_points[i][1],
'ray_btm_z': rays.bottom_points[i][2],
'ray_x': str([p[0] for p in rfn.paths[i]]),
'ray_y': str([p[1] for p in rfn.paths[i]]),
'ray_z': str([p[2] for p in rfn.paths[i]])}
raydb._insert(RAYPATH_TABLE, **d)
raydb.commit()
ndb = raydb.execute('SELECT COUNT(rowid) FROM picks').fetchone()[0]
if (ndb - ndb0) != rays.nrays:
msg = 'Only added {:} of {:} travel times to the database.'\
.format(ndb - ndb0, rays.nrays)
warnings.warn(msg)
return raydb
def test_add_remove_picks(self):
"""
Should add a pick to the picks table.
"""
pickdb = PickDatabaseConnection(':memory:')
# should add all picks to the database
for pick in uniq_picks:
pickdb.add_pick(**pick)
pickdb.commit()
ndb = len(pickdb.execute('SELECT * FROM picks').fetchall())
self.assertEqual(ndb, len(uniq_picks))
# attempting to add pick without primary fields should raise an error
with self.assertRaises(sqlite3.IntegrityError):
pickdb.add_pick(event='Foobar', time=9.834)
# attempting to add duplicate picks should raise error
for pick in uniq_picks:
with self.assertRaises(sqlite3.IntegrityError):
pickdb.add_pick(**pick)
# directly removing pick and then re-adding should work
for pick in uniq_picks:
pickdb.remove_pick(**pick)
pickdb.add_pick(**pick)
pickdb.commit()
ndb = len(pickdb.execute('SELECT * FROM picks').fetchall())
self.assertEqual(ndb, len(uniq_picks))
# invalid collumn names should raise OperationalError
with self.assertRaises(sqlite3.OperationalError):
pickdb.remove_pick(not_a_field=999)
with self.assertRaises(sqlite3.OperationalError):
pickdb.add_pick(not_a_field=999)
# remove the last pick that we added
pickdb.remove_pick(**pick)
# attempting to remove a non-existant pick should do nothing
pickdb.remove_pick(**pick)
# updating picks should add picks if they don't exist and update picks
# if they do exist
for pick in uniq_picks:
pickdb.update_pick(**pick)
pickdb.commit()
ndb = len(pickdb.execute('SELECT * FROM picks').fetchall())
self.assertEqual(ndb, len(uniq_picks))
# should not be able to add pick without required fields
with self.assertRaises(sqlite3.IntegrityError):
pickdb.add_pick(event='Pg', ensemble=1, trace=1)
def test_get_picks(self):
"""
Should return data rows.
"""
# create a new database in memory
pickdb = PickDatabaseConnection(':memory:')
# add picks, and get our own times
times0 = []
for pick in uniq_picks:
pickdb.add_pick(**pick)
times0.append(pick['time'])
pickdb.commit()
# should return a list of sqlite3.Row objects
for row in pickdb.get_picks(event=pick['event']):
self.assertTrue(isinstance(row, sqlite3.Row))
# should return the same data
times1 = []
for pick in uniq_picks:
row = pickdb.get_picks(**pick)[0]
times1.append(row['time'])
self.assertEqual(sorted(times0), sorted(times1))
# should return all data
self.assertEqual(len(uniq_picks),
len(pickdb.get_picks()))
# should return empty list if no matches
self.assertEqual(len(pickdb.get_picks(event='golly_gee')), 0)
# should also return empty list if no data
pickdb = PickDatabaseConnection(':memory:')
self.assertEqual(len(pickdb.get_picks()), 0)
def test_counts(self):
"""
Count functions should return number of distinct rows in tables.
"""
pickdb = PickDatabaseConnection(':memory:')
# add a single pick
event = 'TestCount'
pick = uniq_picks[0]
pick['event'] = event
pickdb.add_pick(**pick)
pickdb.commit()
# should have a single pick for this event in picks table
n = pickdb.count_picks_by_event(event)
self.assertEqual(n, 1)
# should also have a single entry in the event table
n = pickdb._count_distinct(pickdb.EVENT_TABLE, event=event)
self.assertEqual(n, 1)
# now, another pick for the same event
pick['ensemble'] += 1 # ensure unique
pickdb.add_pick(**pick)
pickdb.commit()
# should have two picks for this event in the picks table
n = pickdb.count_picks_by_event(event)
self.assertEqual(n, 2)
# should still just have one entry in the event table for this event
n = pickdb._count_distinct(pickdb.EVENT_TABLE, event=event)
self.assertEqual(n, 1)
def locate_on_surface(vmfile, pickdb, iref, pick_keys={}, x0=None, y0=None,
dx=None, dy=None, plot=False):
"""
Locate a receiver on a surface.
:param vmfile: Filename of the VM Tomography slowness model to
raytrace.
:param pickdb: :class:`rockfish.picking.database.PickDatabaseConnection`
to get picks from for raytracing.
:param iref: index of the surface to move the receiver on
:param pick_keys: Optional. ``dict`` of keys and values to use for
selecting picks from ``pickdb``. Default is to use all picks.
:param x0, y0: Optional. Initial guess at x and y locations. Default is
center of the model.
:param dx, dy: Optional. Distance in x and y to search from ``x0, y0``.
Default is to search the entire model.
:param plot: Optional. Plot results of the location. Default is false.
"""
# Load model
print "Loading VM model..."
vm = readVM(vmfile)
# Setup search domain
print "Setting up search domain..."
if x0 is None:
x0 = np.mean(vm.x)
if y0 is None:
y0 = np.mean(vm.y)
if dx is None:
xsearch = vm.x
else:
ix = vm.xrange2i(max(vm.r1[0], x0 - dx), min(vm.r2[0], x0 + dx))
xsearch = vm.x[ix]
if dy is None:
ysearch = vm.y
else:
iy = vm.yrange2i(max(vm.r1[1], y0 - dy), min(vm.r2[1], y0 + dy))
ysearch = vm.y[iy]
# trace each point in the search region
print "Building traveltime database for {:}x{:} search grid..."\
.format(len(xsearch), len(ysearch))
zz = vm.rf[iref]
ipop = -1
population = []
db = PickDatabaseConnection(':memory:')
for x in xsearch:
for y in ysearch:
z = zz[vm.x2i([x])[0], vm.y2i([y])[0]]
ipop += 1
for _p in pickdb.get_picks(**pick_keys):
p = dict(_p)
p['ensemble'] = ipop
p['receiver_x'] = x
p['receiver_y'] = y
p['receiver_z'] = z
db.add_pick(**p)
population.append((x, y, z))
print "Raytracing..."
rayfile = '.locate.ray'
raytrace(vmfile, db, rayfile, stderr=subprocess.STDOUT,
stdout=subprocess.PIPE)
rays = readRayfanGroup(rayfile)
imin = np.argmin([rfn.rms for rfn in rays.rayfans])
ipop = [rfn.start_point_id for rfn in rays.rayfans][imin]
rms = [rfn.rms for rfn in rays.rayfans][imin]
# # warn if fit point is on edge of search domain
# if (vm.ny > 1) and ((yfit == ysearch[0]) or (yfit == ysearch[-1])):
# on_edge = True
# elif (xfit == xsearch[0]) or (xfit == xsearch[-1]):
# on_edge = True
# else:
# on_edge = False
# if on_edge:
# msg = 'Best-fit location ({:},{:}) is on edge of model domain:'\
# .format(xfit, yfit)
# msg += ' x=[{:},{:}], y=[{:},{:}].'.format(xsearch[0], xsearch[-1],
# ysearch[0], ysearch[-1])
# msg += ' Try using a larger search region.'
# warnings.warn(msg)
# plot
if plot:
fig = plt.figure()
ax = fig.add_subplot(111)
if vm.ny == 1:
ax.plot([p[0] for p in population],
[rfn.rms for rfn in rays.rayfans], '.k')
ax.plot(population[ipop][0], rms, '*r')
plt.xlabel('x (km)')
plt.ylabel('RMS error (s)')
else:
ax.plot([p[0] for p in population], [p[1] for p in population],
'.k')
ax.plot(population[ipop][0], population[ipop][1], '*r')
ax.plot(x0, y0, 'og')
plt.xlabel('x (km)')
plt.xlabel('y (km)')
plt.title('Results of locate_on_surface()')
plt.show()
return population[ipop][0], population[ipop][1], population[ipop][2], rms
class SEGYPlotManagerTestCase(unittest.TestCase):
"""
Test cases for SEGYPlotManager
"""
def setUp(self):
"""
Setup benchmark data.
"""
self.segy = readSEGY(get_example_file('ew0210_o30.segy'),
unpack_headers=True)
self.pickdb = PickDatabaseConnection(':memory:')
for pick in uniq_picks:
self.pickdb.update_pick(**pick)
self.default_params = [
'ABSCISSA_KEY', 'GAIN', 'CLIP',
'NORMALIZATION_METHOD', 'OFFSET_GAIN_POWER',
'WIGGLE_PEN_COLOR', 'WIGGLE_PEN_WIDTH',
'NEG_FILL_COLOR', 'POS_FILL_COLOR', 'DISTANCE_UNIT',
'TIME_UNIT', 'SEGY_TIME_UNITS', 'SEGY_DISTANCE_UNITS',
'SEGY_HEADER_ALIASES']
def test_init_SEGYPlotManager(self):
"""
Should create a new instance of the SEGYPlotManager.
"""
fig = plt.figure()
ax = fig.add_subplot(111)
splt = SEGYPlotManager(ax, self.segy)
# should have the default parameters
for attr in self.default_params:
self.assertTrue(hasattr(splt, attr))
# by default, should *not* have header databse
self.assertFalse(hasattr(splt, 'sdb'))
# should attach axes
self.assertTrue(isinstance(splt.ax, matplotlib.axes.Axes))
# class should be able to update the axes
splt.ax.plot([0,1],[0,1])
self.assertEqual(len(splt.ax.lines), 1)
# updates outside the class should be seen inside the class
ax.plot([0,1],[0,1])
self.assertEqual(len(splt.ax.lines), 2)
self.assertEqual(len(ax.lines), 2)
# if a pick database is given, should attach pickdb and build lookup db
splt = SEGYPlotManager(ax, self.segy, pickdb=self.pickdb)
self.assertTrue(isinstance(splt.pickdb, PickDatabaseConnection))
self.assertTrue(isinstance(splt.sdb, SEGYHeaderDatabase))
def test_build_header_database(self):
"""
Should connect to a database for looking up header attributes.
"""
fig = plt.figure()
ax = fig.add_subplot(111)
# connecting to a database in memory should not create a file
splt = SEGYPlotManager(ax, self.segy, trace_header_database=':memory:')
self.assertFalse(os.path.isfile(':memory:'))
# connecting to a filename should create a file if it does not exist
filename = 'temp.test_build_header_database.sqlite'
if os.path.isfile(filename):
os.remove(filename)
# should not create database if no pickdb is given
splt = SEGYPlotManager(ax, self.segy, trace_header_database=filename)
self.assertFalse(os.path.isfile(filename))
# should create database if pickdb is given
splt = SEGYPlotManager(ax, self.segy, pickdb=self.pickdb,
trace_header_database=filename)
self.assertTrue(os.path.isfile(filename))
# clean up
os.remove(filename)
# create plot manager in memory with pickdb
splt = SEGYPlotManager(ax, self.segy, pickdb=self.pickdb)
# should be able to get primary fields from the picks trace table
pick_keys = splt.pickdb._get_primary_fields(splt.pickdb.TRACE_TABLE)
self.assertTrue(len(pick_keys) > 0)
# pick primary keys should be in the alias dictionary
# or be a header attribute
header = self.segy.traces[0].header
for k in pick_keys:
self.assertTrue(k in splt.SEGY_HEADER_ALIASES \
or hasattr(header, k))
# should add header fields for primary keys in the pick database
sql = 'SELECT * FROM %s' %splt.sdb.TRACE_TABLE
data = splt.sdb.execute(sql)
for key in pick_keys:
_key = splt._get_header_alias(key)
for i,row in enumerate(data):
segy_value = splt.get_header_value(
self.segy.traces[i].header, key, convert_units=False)
db_value = row[_key]
self.assertEqual(segy_value, db_value)
def test_get_units(self):
"""
Should return (segy units, plot units) or None.
"""
fig = plt.figure()
ax = fig.add_subplot(111)
splt = SEGYPlotManager(ax, self.segy)
splt.DISTANCE_UNIT = 'distance_unit_marker'
splt.TIME_UNIT = 'time_unit_marker'
for key in TRACE_HEADER_KEYS:
if key in splt.SEGY_TIME_UNITS:
# should return TIME_UNIT for a time attribute
self.assertEqual(splt._get_units(key)[1],
'time_unit_marker')
elif key in splt.SEGY_DISTANCE_UNITS:
# should return DISTANCE_UNIT for a distance attribute
self.assertEqual(splt._get_units(key)[1],
'distance_unit_marker')
else:
# should return None values are unitless
self.assertEqual(splt._get_units(key), None)
def test_convert_units(self):
"""
Should convert header units to plot units.
"""
fig = plt.figure()
ax = fig.add_subplot(111)
splt = SEGYPlotManager(ax, self.segy)
# should correctly perform unit conversions for distance
splt.DISTANCE_UNIT = 'km'
self.assertEqual(splt._convert_units('offset', [1000]), [1])
# should correctly perform unit conversions for time
splt.TIME_UNIT = 's'
self.assertEqual(splt._convert_units('delay', [1000]), [1])
def test_get_time_array(self):
"""
Should return an array of time values for a single trace.
"""
fig = plt.figure()
ax = fig.add_subplot(111)
splt = SEGYPlotManager(ax, self.segy)
tr = self.segy.traces[0]
# should have npts values
npts = splt.get_header_value(tr.header, 'npts')
t = splt.get_time_array(tr.header)
self.assertEqual(npts, len(t))
def test_get_header_value(self):
"""
Should be able to use aliases to get unit-converted values
from headers.
"""
fig = plt.figure()
ax = fig.add_subplot(111)
splt = SEGYPlotManager(ax, self.segy)
# should return exact header values when convert_units=False
tr = self.segy.traces[0]
for alias in splt.SEGY_HEADER_ALIASES:
key = splt.SEGY_HEADER_ALIASES[alias]
value = splt.get_header_value(tr.header, alias,
convert_units=False)
_value = tr.header.__getattribute__(key)
self.assertEqual(value, _value)
# default should return header values in the plot units
splt.DISTANCE_UNIT = 'km'
alias = 'offset'
key = splt.SEGY_HEADER_ALIASES[alias]
scaled_value = splt.get_header_value(tr.header, alias)
header_value = tr.header.__getattribute__(key)
self.assertEqual(np.round(scaled_value, decimals=3),
header_value/1000.)
def test_get_abscissa(self):
"""
Should return a list of abcissa values.
"""
fig = plt.figure()
ax = fig.add_subplot(111)
splt = SEGYPlotManager(ax, self.segy, pickdb=self.pickdb)
# just get abcissa for a subset of the traces
idx = [0, 100, 103, 104, 500, 550]
values = []
for i in idx:
ensemble = self.segy.traces[i].header.ensemble_number
trace = \
self.segy.traces[i].header.trace_number_within_the_ensemble
values.append((ensemble, trace))
# should return a list of values for plot x-axis
x = splt._get_abscissa(['ensemble', 'trace'], values)
_key = splt._get_header_alias(splt.ABSCISSA_KEY)
for j,i in enumerate(idx):
tr = self.segy.traces[i]
self.assertEqual(tr.header.__getattribute__(_key),
x[j])
def test_manage_layers(self):
"""
Should handle moving plot items around.
"""
fig = plt.figure()
ax = fig.add_subplot(111)
splt = SEGYPlotManager(ax, self.segy)
# should echo parameters if item is not in dicts
self.assertTrue(splt._manage_layers(foobar=True)['foobar'])
self.assertFalse(splt._manage_layers(foobar=False)['foobar'])
# for active item and True, should do nothing
splt.ACTIVE_LINES['foobar'] = ax.plot([0,1], [0,1])
self.assertTrue('foobar' in splt.ACTIVE_LINES)
self.assertFalse('foobar' in splt.INACTIVE_LINES)
self.assertFalse(splt._manage_layers(foobar=True)['foobar'])
self.assertTrue('foobar' in splt.ACTIVE_LINES)
self.assertFalse('foobar' in splt.INACTIVE_LINES)
# for active item and False, should move to inactive and return False
self.assertFalse(splt._manage_layers(foobar=False)['foobar'])
self.assertFalse('foobar' in splt.ACTIVE_LINES)
self.assertTrue('foobar' in splt.INACTIVE_LINES)
# for force_new=True, should remove from active and inactive and return
# True
# item is currently in inactive list
need2plot = splt._manage_layers(force_new=True, foobar=True)
self.assertTrue(need2plot['foobar'])
self.assertFalse('foobar' in splt.ACTIVE_LINES)
self.assertFalse('foobar' in splt.INACTIVE_LINES)
# item is now in active list
splt.ACTIVE_LINES['foobar'] = ax.plot([0,1], [0,1])
need2plot = splt._manage_layers(force_new=True, foobar=True)
self.assertTrue(need2plot['foobar'])
self.assertFalse('foobar' in splt.ACTIVE_LINES)
self.assertFalse('foobar' in splt.INACTIVE_LINES)
