This is a module for mongodb that makes scons generate build.ninja files.

☠️ WARNING: This is still experimental. Use at your own risk. ☠️

To use it, check out this repo into the src/mongo/db/modules directory in your mongodb checkout. You may want to rename it to something short like ninja. Then run scons with your favorite flags and have it build build.ninja. You can now use ninja to build anything that scons can.

mkdir src/mongo/db/modules
cd src/mongo/db/modules
git clone https://github.com/RedBeard0531/mongo_module_ninja ninja
cd -

# On non-linux, remove -gsplit-dwarf.
# Also, be sure to read the section about split DWARF below.
python buildscripts/scons.py CC=clang CXX=clang++ \
    CCFLAGS='-Wa,--compress-debug-sections -gsplit-dwarf' \
    MONGO_VERSION='0.0.0' MONGO_GIT_HASH='unknown' \
    VARIANT_DIR=ninja --modules=ninja \
    build.ninja

export NINJA_STATUS='[%f/%t (%p) %es] ' # make the ninja output even nicer

ninja mongod # builds mongod
ninja # builds the default target (still mongod)
ninja core # supports all scons aliases except lint and distsrc
ninja build/unittests/TAB # autocompletion should work

If you want to change your build flags, just run the scons command with the new flags to have it regenerate the build.ninja file. ninja will automatically regenerate the build.ninja file whenever any of the SCons files change so you don't shouldn't need to manually rerun scons often.

This module requires ninja >= 1.7. You can download it from here if if isn't in your distribution. Note that Fedora calls both the binary and the package ninja-build. Ubuntu calls the package ninja-build but leaves the binary named ninja. Ubuntu <= yakkety (16.10) uses an old version of ninja so you will need to download the binary if you aren't running that release.

This module adds the following options to scons. Unfortunately, they won't show up with --help so they are documented here.

1. Email or slack me (Mathias) if you run in to any problems.
2. If scons says your C or C++ compiler doesn't work, pass the --config=force flag to scons.
3. If you get an error about is_derived_node you are using an old version of scons. Try using python buildscripts/scons.py rather than just scons.
4. If you get an error about Unknown variables specified: try removing all of the \s from your command line.
5. If scons is prompting for your password, try checking out this module with the https:// url used above rather than a git@github.com url.
6. If running ninja errors with a message like die: error: unable to read configuration file your distro probably uses a different package named ninja. Try uninstalling that and installing the package named ninja-build. Also re-read the last paragraph of the introduction section.
7. If any of your debugging tools behave oddly, read the section about split DWARF info below and consider removing -gsplit-dwarf from your CCFLAGS.
8. If ccache doesn't seem to be working, run CCACHE_LOGFILE=/tmp/ccache.log ninja -j1, let it compile a few objects, then look at /tmp/ccache.log. It should tell you why it isn't able to use the cache. If that doesn't help, see step 1.
9. If you are using icecream and you build seems to hang or go really slowly, try restarting the icecream daemon. systemctl restart iceccd or systemctl restart icecream depending on which distribution you are using.

You can run ninja +name_of_test to build then run a cpp unit test. This uses the "basename" of the test, so build/ninja/mongo/bson/bson_obj_test is just ninja +bson_obj_test. This is intended to simplify iterating on one or two tests. To run all of the unittests, continue to use something like ninja unittests && buildscripts/resmoke.py --suites=unittests -j16.

This also works with micro-benchmarks (eg ninja +future_bm), but only run them by themselves not with anything else. For example, don't build another target (ninja +future_bm mongod), or even multiple benchmarks at once (ninja +future_bm +clock_source_bm). You want your system as close to idle as possible when testing performance.

If you have ccache installed and on your path, it will be used automatically. If you have it installed but don't want to use it, pass --no-cache to scons.

You can tell if it is being used by the message printed by scons:

> scons --modules=ninja build.ninja
...
Generating build.ninja with ccache support (pass --no-cache to scons to disable)
scons: done building targets.

> scons --modules=ninja build.ninja --no-cache
...
Generating build.ninja
scons: done building targets.

If you often switch between multiple sets of flags, you can make a *.ninja file for each set. Each *.ninja file is executable so you can run it directly, but unfortunately that breaks tab completion.

I suggest passing --config=force to scons for all of your *.ninja files to keep scons from getting confused as you switch. If you are using ccache, I suggest using the VARIANT_DIR=ninja scons variable so that all builds have the same path. Conversely, if you don't use ccache, I suggest using a different VARIANT_DIR for each set of flags so they don't conflict.

scons CC=clang CXX=clang++ VARIANT_DIR=ninja --config=force build.ninja
scons CC=gcc CXX=g++ VARIANT_DIR=ninja --config=force gcc.ninja

ninja mongod # builds mongod with clang
ninja -f gcc.ninja mongod # builds mongod with gcc
./gcc.ninja mongod # shorter syntax

You can have ninja generate the compilation db used by many clang-based tools by running ninja compile_commands.json or using the compiledb alias like in scons. For your convienience this will also update all generated sources so tools will work when a compile db is created on a clean build tree. You probably only want to use this with a .ninja file configured to use clang so that it uses the set of flags that most tools expect.

The compilation db will be slightly different than the one generated by scons. It adds flags that ninja uses to track header dependencies and each command may be prefixed by ccache. I have tested this with rtags, YouCompleteMe/ycmd and a few of the extra clang tools and they all handle this fine. Please let me know if this causes problems for any tools you use.

On linux, you can pass CCFLAGS=-gsplit-dwarf to try out split dwarf support which makes linking much faster. ccache >= 3.2.3 supports it out of the box so they can be used together. scons will error if you use -gsplit-dwarf with an older ccache or an unsupported platform.

In order to actually use the dwarf info, your debugging tools will need to support it. I've tested the latest perf, addr2line, and llvm-symbolizer (used by mongosymb.py) on linux and they all work. I don't know about older versions or other tools. If your tool of choice doesn't work, upgrade or remove -gsplit-dwarf and recompile.

GDB >= 7.11 has a bug that makes it show all namespaces other than std as (anonymous namespace). If this affects you, you can either recompile without -gsplit-dwarf or apply the patch from that ticket to your gdb. If you are a MongoDB employee, you can download the latest version of our toolchain which includes a patched gdb.

On linux, you can use icecream to distribute your compile tasks to your neighbors' computers, and literally Build Together. This can dramatically reduce the time to do large rebuilds.

1. Make sure you are using ccache
2. Follow the distribution-specific steps below to install and run the icecream daemon
3. Add --icecream to the list of flags you pass to scons when building your build.ninja file
4. Run ninja with a high -j value such as -j400 (this is specifically for when running ninja since the -j you pass to scons when building the build.ninja file doesn't matter)

Since others can now schedule builds on your machine at any time, consider disabling the icecream daemon when doing benchmarking. Depending on your distribution, this is either systemctl stop icecream or systemctl stop iceccd. You will want to restart the daemon before compiling again.

Due to this issue, ccache older than 3.4 requires an additional pass of the C++ preprocessor when using clang (but not gcc). This can become a bottleneck limiting the speed that you can submit jobs to the cluster. You can set the CCACHE_DISABLE=1 environment variable when running ninja to speed up your builds with the trade-off that it won't cache the compilations. Or just upgrade to a newer ccache.

1. apt-get install icecc
2. Download the amd64.deb from this ppa and install it with dpkg -i (yes you need to install from the main repo first then upgrade...)

1. Install icecream from the AUR
2. systemctl enable --now icecream.service

1. dnf install icecream and make sure it is installing 1.1rc2
2. firewall-cmd --zone=FedoraServer --add-service=icecream
3. firewall-cmd --permanent --zone=FedoraServer --add-service=icecream