This repository contains experimental code that is not ready for productive use. It is really not meant to be used on the daily basis and should be considered unstable. Use it on your own risk and only if you absolutely understand what you are doing!

If you are looking for a stable branch, use the one from

https://github.com/tpfanco/tpfanco-legacy

The code in this repository is not yet ready for productive use! Use it on your own risk!

By enabling software control of the system fan, you can void you warranty and damage or shorten the lifespan of your notebook. If you decide to use Tpfanco, you agree to hold us blameless for any damages or data loss that arise from the use of this software.

This project does not have any affiliation with Lenovo or IBM!

Tpfanco is a free and open source fan control software for IBM/Lenovo ThinkPads running GNU/Linux. It consists of a fan control daemon and a GUI to monitor temperature sensor values and set thresholds. For selected ThinkPad models user-generated fan profiles are available.

Tpfanco is a fork of ThinkPad Fan Control (tp-fan) by Sebastian Urban.

tpfancod is the main part of tpfanco. It is a daemon that runs in the background and controls the system fan of ThinkPad notebooks based on specified temperature profiles

• Python 2.7
• DBus with bindings for Python
• thinkpad_acpi kernel module loaded with fan_control=1 to enable fan control.

Packages for the development version are currently not available. The following sections describe manual installation via make

• Run

  sudo make install-systemd
  sudo systemctl enable tpfancod
  

• Reboot your system to reload thinkpad_acpi module with the fan_control=1option.

• Check that tpfanco is running properly via

  systemctl status tpfancod
  

• Run

  sudo make install-sysvinit
  

• Reboot your system to reload thinkpad_acpi module with the fan_control=1option.

• You can uninstall tpfancod by running

  sudo make uninstall
  

• The configuration file is /etc/tpfancod/settings.conf. After manual changes to this configuration file tpfancod must be restarted (e.g. via sudo systemctl restart tpfancod)

• To allow tpfancod control your fan, you must change both enabled and override_profile to True

• Then, in /etc/tpfancod/profile_standard you can specify the triggers for the fan control.

• Here is an example profile_standard (some setting names might change in future) for a Lenovo Thinkpad X200. Note that this configuration uses both sensors from /proc/acpi/ibm/thermal and /sys/devices/virtual/hwmon which was not possible with the old versions. Of course, if /proc/acpi/ibm/thermal is not available (which is the case on some Thinkpads), tpfancod can use only hwmon sensors.

    # This file contains a fan profile for tpfancod
    [General]
    # short description of the purpose of this profile.
    comment =
    # system manufacturer
    product_vendor = LENOVO
    # thinkpad model
    product_name = ThinkPad X200
    # machine type
    product_id = 7459GH6
  
    [Options]
    # set the hysteresis temperature difference.
    hysteresis = 2
  
    [Sensors]
    /sys/devices/virtual/hwmon/hwmon0/temp1_input = {'name':'Sensor 15','scaling':0.001,'triggers':{0:255}}
    /sys/devices/virtual/hwmon/hwmon0/temp2_input = {'name':'Sensor 15','scaling':0.001,'triggers':{0:255}}
    ibm_thermal_sensor_0 = {'name':'CPU','triggers':{0:0, 40:2, 52:3, 60:255}}
    ibm_thermal_sensor_1 = {'name':'Sensor 1','triggers':{0:0, 40:2, 52:3, 60:255}}
    ibm_thermal_sensor_2 = {'name':'Sensor 2','triggers':{0:255}}
    ibm_thermal_sensor_3 = {'name':'Sensor 3','triggers':{0:0, 50:255}}
    ibm_thermal_sensor_4 = {'name':'Sensor 4','triggers':{0:0, 50:255}}
    ibm_thermal_sensor_5 = {'name':'Sensor 5','triggers':{0:255}}
    ibm_thermal_sensor_6 = {'name':'Sensor 6','triggers':{0:0, 50:255}}
    ibm_thermal_sensor_7 = {'name':'Sensor 7','triggers':{0:255}}
    ibm_thermal_sensor_8 = {'name':'Sensor 8','triggers':{0:0, 50:2, 60:255}}
    ibm_thermal_sensor_9 = {'name':'Sensor 9','triggers':{0:0, 50:255}}
    ibm_thermal_sensor_10 = {'name':'Sensor 10','triggers':{0:255}}
    ibm_thermal_sensor_11 = {'name':'Sensor 11','triggers':{0:255}}
    ibm_thermal_sensor_12 = {'name':'Sensor 12','triggers':{0:255}}
    ibm_thermal_sensor_13 = {'name':'Sensor 13','triggers':{0:255}}
    ibm_thermal_sensor_14 = {'name':'Sensor 14','triggers':{0:255}}
    ibm_thermal_sensor_15 = {'name':'Sensor 15','triggers':{0:255}}
  

• Here is an example profile_standard for a Thinkpad X201

      # This file contains a fan profile for tpfancod
    [General]
      # short description of the purpose of this profile.
      comment =
      # system manufacturer
      product_vendor = LENOVO
  
    # thinkpad model
    product_name = ThinkPad X201
  
    # machine type
    product_id = 36805B8
  
    [Options]
    # set the hysteresis temperature difference.
    hysteresis = 2
  
    [Sensors]
    /sys/devices/virtual/hwmon/hwmon0/temp1_input = {'name':'CPU sensor','scaling':0.001,'triggers':{0:0, 40:1, 55:2, 60:255}}
  

• Here is an example of setting.conf

    # This file provides the general configuration of tpfancod
  
    [General]
    # set this to true to allow tpfancod control the fan of your machine.
    enabled = False
    # if a profile for your thinkpad model is available in the database,
    # tpfancod will use it by default and ignore any profiles you have
    # in /etc/tpfancod. set this to true to use custom profiles.
    override_profile = True
    # this determines the current custom profile used by tpfancod. the profile
    # must be placed in /etc/tpfancod and begin with profile_, e.g.
    # profile_library  or profile_gaming. this option works only if
    # override_profile is set to true.
    current_profile = profile_standard
  

tpfancod is covered by the GNU General Public License 3.

Copyright (C) 2011-2015 Vladyslav Shtabovenko
Copyright (C) 2007-2009 Sebastian Urban

tpfancod is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.

tpfancod is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with tpfancod. If not, see http://www.gnu.org/licenses/.