def _setValue(self, mlist, property, val, doc):
if property in ('filter_mime_types', 'pass_mime_types'):
types = []
for spectype in [s.strip() for s in val.splitlines()]:
ok = 1
slashes = spectype.count('/')
if slashes == 0 and not spectype:
ok = 0
elif slashes == 1:
maintype, subtype = [s.strip().lower()
for s in spectype.split('/')]
if not maintype or not subtype:
ok = 0
elif slashes > 1:
ok = 0
if not ok:
doc.addError(_('Bad MIME type ignored: %(spectype)s'))
else:
types.append(spectype.strip().lower())
if property == 'filter_mime_types':
mlist.filter_mime_types = types
elif property == 'pass_mime_types':
mlist.pass_mime_types = types
elif property in ('filter_filename_extensions',
'pass_filename_extensions'):
fexts = []
for ext in [s.strip() for s in val.splitlines()]:
fexts.append(ext.lower())
if property == 'filter_filename_extensions':
mlist.filter_filename_extensions = fexts
elif property == 'pass_filename_extensions':
mlist.pass_filename_extensions = fexts
else:
GUIBase._setValue(self, mlist, property, val, doc)
def _setValue(self, mlist, property, val, doc):
# If we're changing the list's preferred language, change the I18N
# context as well
if property == 'preferred_language':
i18n.set_language(val)
doc.set_language(val)
GUIBase._setValue(self, mlist, property, val, doc)
def _setValue(self, mlist, property, val, doc):
# Watch for the special, immediate action attributes
if property == '_mass_catchup' and val:
mlist.usenet_watermark = None
doc.AddItem(_('Mass catchup completed'))
else:
GUIBase._setValue(self, mlist, property, val, doc)
def _setValue(self, mlist, property, val, doc):
# Watch for the special, immediate action attributes
if property == '_mass_catchup' and val:
mlist.usenet_watermark = None
doc.AddItem(_('Mass catchup completed'))
else:
GUIBase._setValue(self, mlist, property, val, doc)
def _setValue(self, mlist, property, val, doc):
# Do value conversion from web representation to internal
# representation.
try:
if property == 'bounce_processing':
val = int(val)
elif property == 'bounce_score_threshold':
val = float(val)
elif property == 'bounce_info_stale_after':
val = days(int(val))
elif property == 'bounce_you_are_disabled_warnings':
val = int(val)
elif property == 'bounce_you_are_disabled_warnings_interval':
val = days(int(val))
elif property == 'bounce_notify_owner_on_disable':
val = int(val)
elif property == 'bounce_notify_owner_on_removal':
val = int(val)
except ValueError:
doc.addError(
_("""Bad value for <a href="?VARHELP=bounce/%(property)s"
>%(property)s</a>: %(val)s"""),
tag = _('Error: '))
return
GUIBase._setValue(self, mlist, property, val, doc)
def _setValue(self, mlist, property, val, doc):
if property in ('filter_mime_types', 'pass_mime_types'):
types = []
for spectype in [s.strip() for s in val.splitlines()]:
ok = 1
slashes = spectype.count('/')
if slashes == 0 and not spectype:
ok = 0
elif slashes == 1:
maintype, subtype = [
s.strip().lower() for s in spectype.split('/')
]
if not maintype or not subtype:
ok = 0
elif slashes > 1:
ok = 0
if not ok:
doc.addError(_('Bad MIME type ignored: %(spectype)s'))
else:
types.append(spectype.strip().lower())
if property == 'filter_mime_types':
mlist.filter_mime_types = types
elif property == 'pass_mime_types':
mlist.pass_mime_types = types
elif property in ('filter_filename_extensions',
'pass_filename_extensions'):
fexts = []
for ext in [s.strip() for s in val.splitlines()]:
fexts.append(ext.lower())
if property == 'filter_filename_extensions':
mlist.filter_filename_extensions = fexts
elif property == 'pass_filename_extensions':
mlist.pass_filename_extensions = fexts
else:
GUIBase._setValue(self, mlist, property, val, doc)
def _setValue(self, mlist, property, val, doc):
# Do value conversion from web representation to internal
# representation.
try:
if property == 'bounce_processing':
val = int(val)
elif property == 'bounce_score_threshold':
val = float(val)
elif property == 'bounce_info_stale_after':
val = days(int(val))
elif property == 'bounce_you_are_disabled_warnings':
val = int(val)
elif property == 'bounce_you_are_disabled_warnings_interval':
val = days(int(val))
elif property == 'bounce_notify_owner_on_disable':
val = int(val)
elif property == 'bounce_notify_owner_on_removal':
val = int(val)
except ValueError:
doc.addError(
_("""Bad value for <a href="?VARHELP=bounce/%(property)s"
>%(property)s</a>: %(val)s"""),
tag=_('Error: '))
return
GUIBase._setValue(self, mlist, property, val, doc)
def _setValue(self, mlist, property, val, doc):
# If we're changing the list's preferred language, change the I18N
# context as well
if property == 'preferred_language':
i18n.set_language(val)
doc.set_language(val)
GUIBase._setValue(self, mlist, property, val, doc)
def _setValue(self, mlist, property, val, doc):
# Watch for the special, immediate action attributes
if property == "_new_volume" and val:
mlist.bump_digest_volume()
volume = mlist.volume
number = mlist.next_digest_number
doc.AddItem(
_(
"""The next digest will be sent as volume
%(volume)s, number %(number)s"""
)
)
elif property == "_send_digest_now" and val:
status = mlist.send_digest_now()
if status:
doc.AddItem(_("""A digest has been sent."""))
else:
doc.AddItem(_("""There was no digest to send."""))
else:
# Everything else...
if property in ("digest_header", "digest_footer"):
val = self._convertString(mlist, property, ALLOWEDS, val, doc)
if val is None:
# There was a problem, so don't set it
return
GUIBase._setValue(self, mlist, property, val, doc)
def handleForm(self, mlist, category, subcat, cgidata, doc):
if subcat == 'spam':
self._handleForm(mlist, category, subcat, cgidata, doc)
# Everything else is dealt with by the base handler
GUIBase.handleForm(self, mlist, category, subcat, cgidata, doc)
# GPG keys..
if subcat == 'pgpsmime':
syslog('gpg','New list keys uploaded')
gh = GPGUtils.GPGHelper(mlist)
gh.cleanListKeyring()
if mlist.gpg_secret_key!=None and len(mlist.gpg_secret_key)==0:
mlist.gpg_secret_key = None
if mlist.gpg_secret_key:
syslog('gpg',' Importing secret key...')
keyids = gh.importKey(mlist.gpg_secret_key)
if not keyids:
mlist.gpg_secret_key = None
if mlist.gpg_public_key!=None and len(mlist.gpg_public_key)==0:
mlist.gpg_public_key = None
if mlist.gpg_public_key:
syslog('gpg',' Importing public key...')
keyids = gh.importKey(mlist.gpg_public_key)
if not keyids:
mlist.gpg_public_key = None
syslog('gpg',' Importing subscriber public keys...')
keyids=gh.importAllSubscriberKeys()
def _setValue(self, mlist, property, val, doc):
alloweds = list(ALLOWEDS)
if mlist.personalize:
alloweds.extend(PERSONALIZED_ALLOWEDS)
if property in ('msg_header', 'msg_footer'):
val = self._convertString(mlist, property, alloweds, val, doc)
if val is None:
# There was a problem, so don't set it
return
GUIBase._setValue(self, mlist, property, val, doc)
def _setValue(self, mlist, property, val, doc):
alloweds = list(ALLOWEDS)
if mlist.personalize:
alloweds.extend(PERSONALIZED_ALLOWEDS)
if property in ('msg_header', 'msg_footer'):
val = self._convertString(mlist, property, alloweds, val, doc)
if val is None:
# There was a problem, so don't set it
return
GUIBase._setValue(self, mlist, property, val, doc)
def _setValue(self, mlist, property, val, doc):
if property == 'real_name' and \
val.lower() != mlist.internal_name().lower():
# These values can't differ by other than case
doc.addError(_("""<b>real_name</b> attribute not
changed! It must differ from the list's name by case
only."""))
elif property == 'new_member_options':
# Get current value because there are valid bits not in OPTIONS.
# If we're the admin CGI, we then process the bits in OPTIONS,
# turning them on or off as appropriate. Otherwise we process all
# the bits in mm_cfg.OPTINFO so that config_list can set and reset
# them.
newopts = mlist.new_member_options
if isinstance(doc, Document):
opts = OPTIONS
else:
opts = mm_cfg.OPTINFO
for opt in opts:
bitfield = mm_cfg.OPTINFO[opt]
if opt in val:
newopts |= bitfield
else:
newopts &= ~bitfield
mlist.new_member_options = newopts
elif property == 'subject_prefix':
# Convert any html entities to Unicode
mlist.subject_prefix = Utils.canonstr(
val, mlist.preferred_language)
elif property == 'info':
if val != mlist.info:
if Utils.suspiciousHTML(val):
doc.addError(_("""The <b>info</b> attribute you saved
contains suspicious HTML that could potentially expose your users to cross-site
scripting attacks. This change has therefore been rejected. If you still want
to make these changes, you must have shell access to your Mailman server.
This change can be made with bin/withlist or with bin/config_list by setting
mlist.info.
"""))
else:
mlist.info = val
elif property == 'admin_member_chunksize' and (val < 1
or not isinstance(val, int)):
doc.addError(_("""<b>admin_member_chunksize</b> attribute not
changed! It must be an integer > 0."""))
elif property == 'host_name':
try:
Utils.ValidateEmail('user@' + val)
except Errors.EmailAddressError:
doc.addError(_("""<b>host_name</b> attribute not changed!
It must be a valid domain name."""))
else:
GUIBase._setValue(self, mlist, property, val, doc)
else:
GUIBase._setValue(self, mlist, property, val, doc)
def _setValue(self, mlist, property, val, doc):
# Handle these specially because we may need to convert to/from
# external $-string representation.
if property in ('autoresponse_postings_text',
'autoresponse_admin_text',
'autoresponse_request_text'):
val = self._convertString(mlist, property, ALLOWEDS, val, doc)
if val is None:
# There was a problem, so don't set it
return
GUIBase._setValue(self, mlist, property, val, doc)
def _setValue(self, mlist, property, val, doc):
# Handle these specially because we may need to convert to/from
# external $-string representation.
if property in ('autoresponse_postings_text',
'autoresponse_admin_text',
'autoresponse_request_text'):
val = self._convertString(mlist, property, ALLOWEDS, val, doc)
if val is None:
# There was a problem, so don't set it
return
GUIBase._setValue(self, mlist, property, val, doc)
def _setValue(self, mlist, property, val, doc):
if property == 'real_name' and \
val.lower() <> str(mlist.real_name.lower()):
# These values can't differ by other than case
doc.addError(_("""<b>real_name</b> attribute not
changed! It must differ from the list's name by case
only."""))
elif property == 'new_member_options':
# Get current value because there are valid bits not in OPTIONS.
# If we're the admin CGI, we then process the bits in OPTIONS,
# turning them on or off as appropriate. Otherwise we process all
# the bits in mm_cfg.OPTINFO so that config_list can set and reset
# them.
newopts = mlist.new_member_options
if isinstance(doc, Document):
opts = OPTIONS
else:
opts = mm_cfg.OPTINFO
for opt in opts:
bitfield = mm_cfg.OPTINFO[opt]
if opt in val:
newopts |= bitfield
else:
newopts &= ~bitfield
mlist.new_member_options = newopts
elif property == 'subject_prefix':
# Convert any html entities to Unicode
mlist.subject_prefix = Utils.canonstr(
val, mlist.preferred_language)
elif property == 'info':
if val <> mlist.info:
if 0 and Utils.suspiciousHTML(val):
doc.addError(_("""The <b>info</b> attribute you saved
contains suspicious HTML that could potentially expose your users to cross-site
scripting attacks. This change has therefore been rejected. If you still want
to make these changes, you must have shell access to your Mailman server.
This change can be made with bin/withlist or with bin/config_list by setting
mlist.info.
"""))
else:
mlist.info = val
elif property == 'admin_member_chunksize' and (val < 1
or not isinstance(val, IntType)):
doc.addError(_("""<b>admin_member_chunksize</b> attribute not
changed! It must be an integer > 0."""))
else:
GUIBase._setValue(self, mlist, property, val, doc)
def _setValue(self, mlist, property, val, doc):
# Watch for the special, immediate action attributes
if property == '_new_volume' and val:
mlist.bump_digest_volume()
volume = mlist.volume
number = mlist.next_digest_number
doc.AddItem(
_("""The next digest will be sent as volume
%(volume)s, number %(number)s"""))
elif property == '_send_digest_now' and val:
status = mlist.send_digest_now()
if status:
doc.AddItem(_("""A digest has been sent."""))
else:
doc.AddItem(_("""There was no digest to send."""))
else:
# Everything else...
if property in ('digest_header', 'digest_footer'):
val = self._convertString(mlist, property, ALLOWEDS, val, doc)
if val is None:
# There was a problem, so don't set it
return
GUIBase._setValue(self, mlist, property, val, doc)
def handleForm(self, mlist, category, subcat, cgidata, doc):
if subcat == 'spam':
self._handleForm(mlist, category, subcat, cgidata, doc)
# Everything else is dealt with by the base handler
GUIBase.handleForm(self, mlist, category, subcat, cgidata, doc)
def handleForm(self, mlist, category, subcat, cgidata, doc):
if subcat == 'spam':
self._handleForm(mlist, category, subcat, cgidata, doc)
# Everything else is dealt with by the base handler
GUIBase.handleForm(self, mlist, category, subcat, cgidata, doc)
