def on_connect_button_toggled(self, widget):
if widget.get_active():
self.tnc = TncModel(self, self.device_path)
self.tnc.connect()
elif self.tnc is not None: # Possible race condition here...
self.tnc.disconnect()
self.tnc = None
def on_connect_button_toggled(self, widget):
if widget.get_active():
self.tnc = TncModel(self, self.device_path)
self.tnc.connect()
elif self.tnc is not None: # Possible race condition here...
self.tnc.disconnect()
self.tnc = None
def on_serial_port_combobox_changed(self, widget, data=None):
text = widget.get_active_text()
if text != None:
self.tnc = TncModel(self, text)
class MobilinkdTnc1Config(object):
def __init__(self):
self.tnc = None
self.connect_message = None
self.builder = Gtk.Builder()
self.builder.add_from_file(
os.path.join(glade_location(), "glade/MobilinkdTnc1Config.glade"))
self.window = self.builder.get_object("window")
self.window.connect("delete-event", self.close)
self.init_serial_port_combobox()
self.init_power_section()
self.init_transmit_volume()
self.init_receive_volume()
self.init_kiss_parameters()
self.init_firmware_section()
self.init_eeprom_section()
self.status = self.builder.get_object("statusbar")
self.builder.connect_signals(self)
self.tnc_disconnect()
self.window.show()
Gtk.main()
def close(self, widget, data=None):
if self.tnc is not None:
self.tnc.disconnect()
self.tnc = None
Gtk.main_quit()
def init_serial_port_combobox(self):
self.serial_port_combobox = self.builder.get_object("serial_port_combobox")
for port in comports():
self.serial_port_combobox.append_text(port[0])
def on_serial_port_combobox_changed(self, widget, data=None):
text = widget.get_active_text()
if text != None:
self.tnc = TncModel(self, text)
def init_power_section(self):
self.battery_level_label = self.builder.get_object("battery_level_label")
self.battery_level_bar = self.builder.get_object("battery_level_bar")
self.battery_level_bar.set_fraction(0.0)
self.power_control_box = self.builder.get_object("power_control_box")
self.usb_on_button = self.builder.get_object("usb_on_button")
self.usb_off_button = self.builder.get_object("usb_off_button")
self.usb_on_button.set_sensitive(False)
self.usb_off_button.set_sensitive(False)
def init_eeprom_section(self):
self.eeprom_frame = self.builder.get_object("eeprom_frame")
self.eeprom_save_button = self.builder.get_object("eeprom_save_button")
self.eeprom_save_button.set_sensitive(False)
self.eeprom_frame.set_visible(False)
def init_transmit_volume(self):
self.transmit_volume_scale = self.builder.get_object("transmit_volume_scale")
self.transmit_volume_scale.set_range(16.0, 255.0)
self.transmit_volume_scale.set_value(128.0)
self.transmit_volume_scale.set_sensitive(False)
self.mark_toggle_button = self.builder.get_object("mark_toggle_button")
self.space_toggle_button = self.builder.get_object("space_toggle_button")
self.ptt_toggle_button = self.builder.get_object("ptt_toggle_button")
def on_mark_toggle_button_toggled(self, widget, data=None):
self.tnc.set_mark(widget.get_active())
def on_space_toggle_button_toggled(self, widget, data=None):
self.tnc.set_space(widget.get_active())
def on_ptt_toggle_button_toggled(self, widget, data=None):
self.tnc.set_ptt(widget.get_active())
def on_input_atten_toggle_button_toggled(self, widget, data=None):
self.tnc.set_input_atten(widget.get_active())
def on_transmit_volume_scale_change_value(self, widget, scroll, value, data=None):
if value > 255: value = 255
if value < 0: value = 0
widget.set_value(int(value))
self.tnc.set_tx_volume(int(value))
return True
def init_receive_volume(self):
self.receive_volume_levelbar = self.builder.get_object("receive_volume_levelbar")
self.receive_volume_levelbar.add_offset_value(Gtk.LEVEL_BAR_OFFSET_LOW, 5.0)
self.receive_volume_levelbar.add_offset_value(Gtk.LEVEL_BAR_OFFSET_HIGH, 7.0)
self.receive_volume_levelbar.set_value(0.0)
self.input_atten_toggle_button = self.builder.get_object("input_atten_toggle_button")
self.receive_volume_progressbar = self.builder.get_object("receive_volume_progressbar")
if os.name != "posix":
self.receive_volume_progressbar.show()
self.receive_volume_levelbar.hide()
self.receive_volume_progressbar.set_fraction(0.0)
def init_kiss_parameters(self):
self.dcd_toggle_button = self.builder.get_object("dcd_toggle_button")
self.kiss_tx_delay_spin_button = self.builder.get_object("kiss_tx_delay_spin_button")
self.kiss_tx_delay_spin_button.set_range(0.0, 255.0)
self.kiss_tx_delay_spin_button.set_increments(1.0, 10.0)
self.kiss_tx_delay_spin_button.set_value(50)
self.kiss_persistence_spin_button = self.builder.get_object("kiss_persistence_spin_button")
self.kiss_persistence_spin_button.set_range(0.0, 255.0)
self.kiss_persistence_spin_button.set_increments(1.0, 10.0)
self.kiss_persistence_spin_button.set_value(63)
self.kiss_slot_time_spin_button = self.builder.get_object("kiss_slot_time_spin_button")
self.kiss_slot_time_spin_button.set_range(0.0, 255.0)
self.kiss_slot_time_spin_button.set_increments(1.0, 10.0)
self.kiss_slot_time_spin_button.set_value(25)
self.kiss_tx_tail_spin_button = self.builder.get_object("kiss_tx_tail_spin_button")
self.kiss_tx_tail_spin_button.set_range(0.0, 255.0)
self.kiss_tx_tail_spin_button.set_increments(1.0, 10.0)
self.kiss_tx_tail_spin_button.set_value(2)
self.kiss_duplex_toggle_button = self.builder.get_object("kiss_duplex_toggle_button")
self.kiss_full_duplex_image = self.builder.get_object("kiss_full_duplex_image")
self.kiss_half_duplex_image = self.builder.get_object("kiss_half_duplex_image")
self.conn_track_toggle_button = self.builder.get_object("conn_track_toggle_button")
self.verbose_toggle_button = self.builder.get_object("verbose_toggle_button")
self.ptt_label = self.builder.get_object("ptt_label")
self.ptt_simplex_radiobutton = self.builder.get_object("ptt_simplex_radiobutton")
self.ptt_multiplex_radiobutton = self.builder.get_object("ptt_multiplex_radiobutton")
def on_dcd_toggled(self, widget, data=None):
self.tnc.set_squelch_level((not widget.get_active()) * 2)
def on_ptt_toggled(self, widget, data=None):
if widget.get_active():
self.tnc.set_ptt_channel(self.ptt_multiplex_radiobutton.get_active())
def on_verbose_toggled(self, widget, data=None):
self.tnc.set_verbosity(widget.get_active())
def on_kiss_duplex_toggled(self, widget, data=None):
self.tnc.set_duplex(widget.get_active())
def on_conn_track_toggled(self, widget, data=None):
self.tnc.set_conn_track(widget.get_active())
def on_kiss_tx_delay_spin_button_value_changed(self, widget, data=None):
self.tnc.set_tx_delay(widget.get_value_as_int())
def on_kiss_persistence_spin_button_value_changed(self, widget, data=None):
self.tnc.set_persistence(widget.get_value_as_int())
def on_kiss_slot_time_spin_button_value_changed(self, widget, data=None):
self.tnc.set_time_slot(widget.get_value_as_int())
def on_kiss_tx_tail_spin_button_value_changed(self, widget, data=None):
self.tnc.set_tx_tail(widget.get_value_as_int())
def on_connect_button_clicked(self, widget, data=None):
if self.tnc is None:
self.connect_message = self.status.push(1, "Please choose a serial port.")
return
if self.tnc.connected():
self.connect_message = self.status.push(1, "Already connected.")
return
if self.connect_message is not None:
self.status.remove(1, self.connect_message)
self.tnc.connect()
def on_window_destroy(self, widget, data=None):
print "quitting"
Gtk.main_quit()
def init_firmware_section(self):
self.firmware_file_chooser_button = self.builder.get_object("firmware_file_chooser_button")
self.upload_button = self.builder.get_object("upload_button")
self.firmware_entry = self.builder.get_object("firmware_entry")
def on_firmware_file_chooser_button_file_set(self, widget, data=None):
self.firmware_file = self.firmware_file_chooser_button.get_filename()
self.upload_button.set_sensitive(True)
def on_eeprom_save_button_clicked(self, widget, data=None):
self.tnc.save_eeprom_settings()
def on_usb_on_button_toggled(self, widget, data=None):
self.tnc.set_usb_on(widget.get_active())
def on_usb_off_button_toggled(self, widget, data=None):
self.tnc.set_usb_off(widget.get_active())
def on_upload_button_clicked(self, widget, data=None):
self.firmware_gui = FirmwareUploadGui(self.builder, self.tnc)
self.tnc.upload_firmware(self.firmware_file, self.firmware_gui)
self.firmware_gui_tag = GObject.idle_add(self.check_firmware_upload_complete)
def tnc_connect(self):
self.serial_port_combobox.set_sensitive(False)
self.transmit_volume_scale.set_sensitive(True)
self.mark_toggle_button.set_sensitive(True)
self.mark_toggle_button.set_active(False)
self.space_toggle_button.set_sensitive(True)
self.space_toggle_button.set_active(False)
self.ptt_toggle_button.set_sensitive(True)
self.ptt_toggle_button.set_active(False)
self.dcd_toggle_button.set_sensitive(False)
self.dcd_toggle_button.set_active(False)
self.verbose_toggle_button.set_sensitive(False)
self.verbose_toggle_button.set_active(False)
self.kiss_tx_delay_spin_button.set_sensitive(True)
self.kiss_persistence_spin_button.set_sensitive(True)
self.kiss_slot_time_spin_button.set_sensitive(True)
self.kiss_tx_tail_spin_button.set_sensitive(True)
self.kiss_duplex_toggle_button.set_sensitive(False)
self.kiss_duplex_toggle_button.set_active(False)
self.conn_track_toggle_button.set_sensitive(False)
self.conn_track_toggle_button.set_active(False)
self.firmware_file_chooser_button.set_sensitive(True)
self.upload_button.set_sensitive(False)
self.firmware_entry.set_sensitive(True)
def tnc_disconnect(self):
self.transmit_volume_scale.set_sensitive(False)
self.mark_toggle_button.set_sensitive(False)
self.space_toggle_button.set_sensitive(False)
self.ptt_toggle_button.set_sensitive(False)
self.ptt_simplex_radiobutton.set_sensitive(False)
self.ptt_multiplex_radiobutton.set_sensitive(False)
self.dcd_toggle_button.set_sensitive(False)
self.kiss_tx_delay_spin_button.set_sensitive(False)
self.kiss_persistence_spin_button.set_sensitive(False)
self.kiss_slot_time_spin_button.set_sensitive(False)
self.kiss_tx_tail_spin_button.set_sensitive(False)
self.kiss_duplex_toggle_button.set_sensitive(False)
self.conn_track_toggle_button.set_sensitive(False)
self.firmware_file_chooser_button.set_sensitive(False)
self.upload_button.set_sensitive(False)
self.firmware_entry.set_sensitive(False)
self.usb_on_button.set_sensitive(False)
self.usb_off_button.set_sensitive(False)
def tnc_rx_volume(self, value):
self.receive_volume_levelbar.set_value(value)
self.receive_volume_progressbar.set_fraction(value / 8.0)
def tnc_tx_volume(self, value):
self.transmit_volume_scale.set_value(value)
def tnc_battery_level(self, value):
self.battery_level_label.set_text(str(int(value)) + "mV")
level = (value - 3400.0) / 100.0
self.battery_level_bar.set_fraction(level / 8.0)
def tnc_power_on(self, value):
self.usb_on_button.set_sensitive(True)
self.usb_on_button.set_active(value)
def tnc_power_off(self, value):
self.usb_off_button.set_sensitive(True)
self.usb_off_button.set_active(value)
def tnc_input_atten(self, value):
self.input_atten_toggle_button.set_active(value > 0);
def tnc_squelch_level(self, value):
pass
def tnc_tx_delay(self, value):
self.kiss_tx_delay_spin_button.set_value(value)
def tnc_persistence(self, value):
self.kiss_persistence_spin_button.set_value(value)
def tnc_slot_time(self, value):
self.kiss_slot_time_spin_button.set_value(value)
def tnc_tx_tail(self, value):
self.kiss_tx_tail_spin_button.set_value(value)
def tnc_dcd(self, value):
self.dcd_toggle_button.set_sensitive(True)
self.dcd_toggle_button.set_active(value == 0)
def tnc_verbose(self, value):
self.verbose_toggle_button.set_sensitive(True)
self.verbose_toggle_button.set_active(value)
def tnc_duplex(self, value):
self.kiss_duplex_toggle_button.set_sensitive(True)
self.kiss_duplex_toggle_button.set_active(value)
return
if value:
self.kiss_duplex_toggle_button.set_image(self.kiss_full_duplex_image)
else:
self.kiss_duplex_toggle_button.set_image(self.kiss_half_duplex_image)
def tnc_conn_track(self, value):
self.conn_track_toggle_button.set_sensitive(True)
self.conn_track_toggle_button.set_active(value)
def tnc_eeprom_save(self):
self.eeprom_frame.set_visible(True)
self.eeprom_save_button.set_sensitive(True)
def tnc_firmware_version(self, value):
self.firmware_entry.set_text(value)
def tnc_ptt_style(self, value):
self.ptt_label.set_visible(True)
self.ptt_simplex_radiobutton.set_visible(True)
self.ptt_multiplex_radiobutton.set_visible(True)
self.ptt_simplex_radiobutton.set_sensitive(True)
self.ptt_simplex_radiobutton.set_active(False)
self.ptt_multiplex_radiobutton.set_sensitive(True)
self.ptt_multiplex_radiobutton.set_active(False)
if value == 0:
self.ptt_simplex_radiobutton.set_active(True)
else:
self.ptt_multiplex_radiobutton.set_active(True)
def exception(self, e):
context = self.status.get_context_id("exception")
self.status.pop(context)
self.status.push(context, str(e))
# dialog = self.builder.get_object("error_dialog")
# dialog.format_secondary_text(str(e))
# dialog.run()
# dialog.hide()
def notice(self, msg):
context = self.status.get_context_id("notice")
self.status.pop(context)
self.status.push(context, msg)
pass
def check_firmware_upload_complete(self):
assert(self.firmware_gui is not None)
if not self.firmware_gui.complete():
self.firmware_gui_tag = GObject.idle_add(self.check_firmware_upload_complete)
return
self.tnc.upload_firmware_complete()
self.firmware_gui.dialog()
self.firmware_gui = None
def on_serial_port_combobox_changed(self, widget, data=None):
text = widget.get_active_text()
if text != None:
self.tnc = TncModel(self, text)
class MobilinkdTnc1Config(object):
def __init__(self):
self.tnc = None
self.connect_message = None
self.builder = Gtk.Builder()
self.builder.add_from_file(
os.path.join(glade_location(), "glade/MobilinkdTnc1Config.glade"))
self.window = self.builder.get_object("window")
self.window.connect("delete-event", self.close)
self.init_serial_port_combobox()
self.init_power_section()
self.init_transmit_volume()
self.init_receive_volume()
self.init_kiss_parameters()
self.init_firmware_section()
self.init_eeprom_section()
self.status = self.builder.get_object("statusbar")
self.builder.connect_signals(self)
self.tnc_disconnect()
self.window.show()
Gtk.main()
def close(self, widget, data=None):
if self.tnc is not None:
self.tnc.disconnect()
self.tnc = None
Gtk.main_quit()
def init_serial_port_combobox(self):
self.serial_port_combobox = self.builder.get_object(
"serial_port_combobox")
for port in comports():
self.serial_port_combobox.append_text(port[0])
def on_serial_port_combobox_changed(self, widget, data=None):
text = widget.get_active_text()
if text != None:
self.tnc = TncModel(self, text)
def init_power_section(self):
self.battery_level_label = self.builder.get_object(
"battery_level_label")
self.battery_level_bar = self.builder.get_object("battery_level_bar")
self.battery_level_bar.set_fraction(0.0)
self.power_control_box = self.builder.get_object("power_control_box")
self.usb_on_button = self.builder.get_object("usb_on_button")
self.usb_off_button = self.builder.get_object("usb_off_button")
self.usb_on_button.set_sensitive(False)
self.usb_off_button.set_sensitive(False)
def init_eeprom_section(self):
self.eeprom_frame = self.builder.get_object("eeprom_frame")
self.eeprom_save_button = self.builder.get_object("eeprom_save_button")
self.eeprom_save_button.set_sensitive(False)
self.eeprom_frame.set_visible(False)
def init_transmit_volume(self):
self.transmit_volume_scale = self.builder.get_object(
"transmit_volume_scale")
self.transmit_volume_scale.set_range(16.0, 255.0)
self.transmit_volume_scale.set_value(128.0)
self.transmit_volume_scale.set_sensitive(False)
self.mark_toggle_button = self.builder.get_object("mark_toggle_button")
self.space_toggle_button = self.builder.get_object(
"space_toggle_button")
self.ptt_toggle_button = self.builder.get_object("ptt_toggle_button")
def on_mark_toggle_button_toggled(self, widget, data=None):
self.tnc.set_mark(widget.get_active())
def on_space_toggle_button_toggled(self, widget, data=None):
self.tnc.set_space(widget.get_active())
def on_ptt_toggle_button_toggled(self, widget, data=None):
self.tnc.set_ptt(widget.get_active())
def on_input_atten_toggle_button_toggled(self, widget, data=None):
self.tnc.set_input_atten(widget.get_active())
def on_transmit_volume_scale_change_value(self,
widget,
scroll,
value,
data=None):
if value > 255: value = 255
if value < 0: value = 0
widget.set_value(int(value))
self.tnc.set_tx_volume(int(value))
return True
def init_receive_volume(self):
self.receive_volume_levelbar = self.builder.get_object(
"receive_volume_levelbar")
self.receive_volume_levelbar.add_offset_value(Gtk.LEVEL_BAR_OFFSET_LOW,
5.0)
self.receive_volume_levelbar.add_offset_value(
Gtk.LEVEL_BAR_OFFSET_HIGH, 7.0)
self.receive_volume_levelbar.set_value(0.0)
self.input_atten_toggle_button = self.builder.get_object(
"input_atten_toggle_button")
self.receive_volume_progressbar = self.builder.get_object(
"receive_volume_progressbar")
if os.name != "posix":
self.receive_volume_progressbar.show()
self.receive_volume_levelbar.hide()
self.receive_volume_progressbar.set_fraction(0.0)
def init_kiss_parameters(self):
self.dcd_toggle_button = self.builder.get_object("dcd_toggle_button")
self.kiss_tx_delay_spin_button = self.builder.get_object(
"kiss_tx_delay_spin_button")
self.kiss_tx_delay_spin_button.set_range(0.0, 255.0)
self.kiss_tx_delay_spin_button.set_increments(1.0, 10.0)
self.kiss_tx_delay_spin_button.set_value(50)
self.kiss_persistence_spin_button = self.builder.get_object(
"kiss_persistence_spin_button")
self.kiss_persistence_spin_button.set_range(0.0, 255.0)
self.kiss_persistence_spin_button.set_increments(1.0, 10.0)
self.kiss_persistence_spin_button.set_value(63)
self.kiss_slot_time_spin_button = self.builder.get_object(
"kiss_slot_time_spin_button")
self.kiss_slot_time_spin_button.set_range(0.0, 255.0)
self.kiss_slot_time_spin_button.set_increments(1.0, 10.0)
self.kiss_slot_time_spin_button.set_value(25)
self.kiss_tx_tail_spin_button = self.builder.get_object(
"kiss_tx_tail_spin_button")
self.kiss_tx_tail_spin_button.set_range(0.0, 255.0)
self.kiss_tx_tail_spin_button.set_increments(1.0, 10.0)
self.kiss_tx_tail_spin_button.set_value(2)
self.kiss_duplex_toggle_button = self.builder.get_object(
"kiss_duplex_toggle_button")
self.kiss_full_duplex_image = self.builder.get_object(
"kiss_full_duplex_image")
self.kiss_half_duplex_image = self.builder.get_object(
"kiss_half_duplex_image")
self.conn_track_toggle_button = self.builder.get_object(
"conn_track_toggle_button")
self.verbose_toggle_button = self.builder.get_object(
"verbose_toggle_button")
self.ptt_label = self.builder.get_object("ptt_label")
self.ptt_simplex_radiobutton = self.builder.get_object(
"ptt_simplex_radiobutton")
self.ptt_multiplex_radiobutton = self.builder.get_object(
"ptt_multiplex_radiobutton")
def on_dcd_toggled(self, widget, data=None):
self.tnc.set_squelch_level((not widget.get_active()) * 2)
def on_ptt_toggled(self, widget, data=None):
if widget.get_active():
self.tnc.set_ptt_channel(
self.ptt_multiplex_radiobutton.get_active())
def on_verbose_toggled(self, widget, data=None):
self.tnc.set_verbosity(widget.get_active())
def on_kiss_duplex_toggled(self, widget, data=None):
self.tnc.set_duplex(widget.get_active())
def on_conn_track_toggled(self, widget, data=None):
self.tnc.set_conn_track(widget.get_active())
def on_kiss_tx_delay_spin_button_value_changed(self, widget, data=None):
self.tnc.set_tx_delay(widget.get_value_as_int())
def on_kiss_persistence_spin_button_value_changed(self, widget, data=None):
self.tnc.set_persistence(widget.get_value_as_int())
def on_kiss_slot_time_spin_button_value_changed(self, widget, data=None):
self.tnc.set_time_slot(widget.get_value_as_int())
def on_kiss_tx_tail_spin_button_value_changed(self, widget, data=None):
self.tnc.set_tx_tail(widget.get_value_as_int())
def on_connect_button_clicked(self, widget, data=None):
if self.tnc is None:
self.connect_message = self.status.push(
1, "Please choose a serial port.")
return
if self.tnc.connected():
self.connect_message = self.status.push(1, "Already connected.")
return
if self.connect_message is not None:
self.status.remove(1, self.connect_message)
self.tnc.connect()
def on_window_destroy(self, widget, data=None):
print "quitting"
Gtk.main_quit()
def init_firmware_section(self):
self.firmware_file_chooser_button = self.builder.get_object(
"firmware_file_chooser_button")
self.upload_button = self.builder.get_object("upload_button")
self.firmware_entry = self.builder.get_object("firmware_entry")
def on_firmware_file_chooser_button_file_set(self, widget, data=None):
self.firmware_file = self.firmware_file_chooser_button.get_filename()
self.upload_button.set_sensitive(True)
def on_eeprom_save_button_clicked(self, widget, data=None):
self.tnc.save_eeprom_settings()
def on_usb_on_button_toggled(self, widget, data=None):
self.tnc.set_usb_on(widget.get_active())
def on_usb_off_button_toggled(self, widget, data=None):
self.tnc.set_usb_off(widget.get_active())
def on_upload_button_clicked(self, widget, data=None):
self.firmware_gui = FirmwareUploadGui(self.builder, self.tnc)
self.tnc.upload_firmware(self.firmware_file, self.firmware_gui)
self.firmware_gui_tag = GObject.idle_add(
self.check_firmware_upload_complete)
def tnc_connect(self):
self.serial_port_combobox.set_sensitive(False)
self.transmit_volume_scale.set_sensitive(True)
self.mark_toggle_button.set_sensitive(True)
self.mark_toggle_button.set_active(False)
self.space_toggle_button.set_sensitive(True)
self.space_toggle_button.set_active(False)
self.ptt_toggle_button.set_sensitive(True)
self.ptt_toggle_button.set_active(False)
self.dcd_toggle_button.set_sensitive(False)
self.dcd_toggle_button.set_active(False)
self.verbose_toggle_button.set_sensitive(False)
self.verbose_toggle_button.set_active(False)
self.kiss_tx_delay_spin_button.set_sensitive(True)
self.kiss_persistence_spin_button.set_sensitive(True)
self.kiss_slot_time_spin_button.set_sensitive(True)
self.kiss_tx_tail_spin_button.set_sensitive(True)
self.kiss_duplex_toggle_button.set_sensitive(False)
self.kiss_duplex_toggle_button.set_active(False)
self.conn_track_toggle_button.set_sensitive(False)
self.conn_track_toggle_button.set_active(False)
self.firmware_file_chooser_button.set_sensitive(True)
self.upload_button.set_sensitive(False)
self.firmware_entry.set_sensitive(True)
def tnc_disconnect(self):
self.transmit_volume_scale.set_sensitive(False)
self.mark_toggle_button.set_sensitive(False)
self.space_toggle_button.set_sensitive(False)
self.ptt_toggle_button.set_sensitive(False)
self.ptt_simplex_radiobutton.set_sensitive(False)
self.ptt_multiplex_radiobutton.set_sensitive(False)
self.dcd_toggle_button.set_sensitive(False)
self.kiss_tx_delay_spin_button.set_sensitive(False)
self.kiss_persistence_spin_button.set_sensitive(False)
self.kiss_slot_time_spin_button.set_sensitive(False)
self.kiss_tx_tail_spin_button.set_sensitive(False)
self.kiss_duplex_toggle_button.set_sensitive(False)
self.conn_track_toggle_button.set_sensitive(False)
self.firmware_file_chooser_button.set_sensitive(False)
self.upload_button.set_sensitive(False)
self.firmware_entry.set_sensitive(False)
self.usb_on_button.set_sensitive(False)
self.usb_off_button.set_sensitive(False)
def tnc_rx_volume(self, value):
self.receive_volume_levelbar.set_value(value)
self.receive_volume_progressbar.set_fraction(value / 8.0)
def tnc_tx_volume(self, value):
self.transmit_volume_scale.set_value(value)
def tnc_battery_level(self, value):
self.battery_level_label.set_text(str(int(value)) + "mV")
level = (value - 3400.0) / 100.0
self.battery_level_bar.set_fraction(level / 8.0)
def tnc_power_on(self, value):
self.usb_on_button.set_sensitive(True)
self.usb_on_button.set_active(value)
def tnc_power_off(self, value):
self.usb_off_button.set_sensitive(True)
self.usb_off_button.set_active(value)
def tnc_input_atten(self, value):
self.input_atten_toggle_button.set_active(value > 0)
def tnc_squelch_level(self, value):
pass
def tnc_tx_delay(self, value):
self.kiss_tx_delay_spin_button.set_value(value)
def tnc_persistence(self, value):
self.kiss_persistence_spin_button.set_value(value)
def tnc_slot_time(self, value):
self.kiss_slot_time_spin_button.set_value(value)
def tnc_tx_tail(self, value):
self.kiss_tx_tail_spin_button.set_value(value)
def tnc_dcd(self, value):
self.dcd_toggle_button.set_sensitive(True)
self.dcd_toggle_button.set_active(value == 0)
def tnc_verbose(self, value):
self.verbose_toggle_button.set_sensitive(True)
self.verbose_toggle_button.set_active(value)
def tnc_duplex(self, value):
self.kiss_duplex_toggle_button.set_sensitive(True)
self.kiss_duplex_toggle_button.set_active(value)
return
if value:
self.kiss_duplex_toggle_button.set_image(
self.kiss_full_duplex_image)
else:
self.kiss_duplex_toggle_button.set_image(
self.kiss_half_duplex_image)
def tnc_conn_track(self, value):
self.conn_track_toggle_button.set_sensitive(True)
self.conn_track_toggle_button.set_active(value)
def tnc_eeprom_save(self):
self.eeprom_frame.set_visible(True)
self.eeprom_save_button.set_sensitive(True)
def tnc_firmware_version(self, value):
self.firmware_entry.set_text(value)
def tnc_ptt_style(self, value):
self.ptt_label.set_visible(True)
self.ptt_simplex_radiobutton.set_visible(True)
self.ptt_multiplex_radiobutton.set_visible(True)
self.ptt_simplex_radiobutton.set_sensitive(True)
self.ptt_simplex_radiobutton.set_active(False)
self.ptt_multiplex_radiobutton.set_sensitive(True)
self.ptt_multiplex_radiobutton.set_active(False)
if value == 0:
self.ptt_simplex_radiobutton.set_active(True)
else:
self.ptt_multiplex_radiobutton.set_active(True)
def exception(self, e):
context = self.status.get_context_id("exception")
self.status.pop(context)
self.status.push(context, str(e))
# dialog = self.builder.get_object("error_dialog")
# dialog.format_secondary_text(str(e))
# dialog.run()
# dialog.hide()
def notice(self, msg):
context = self.status.get_context_id("notice")
self.status.pop(context)
self.status.push(context, msg)
pass
def check_firmware_upload_complete(self):
assert (self.firmware_gui is not None)
if not self.firmware_gui.complete():
self.firmware_gui_tag = GObject.idle_add(
self.check_firmware_upload_complete)
return
self.tnc.upload_firmware_complete()
self.firmware_gui.dialog()
self.firmware_gui = None
class TncConfigApp(object):
def __init__(self):
self.tnc = None
self.device_path = None
self.connect_message = None
self.builder = Gtk.Builder()
self.builder.add_from_file(
os.path.join(glade_location(), "glade/TncConfigApp.glade"))
# settings = Gtk.Settings.get_default()
# settings.set_property("gtk-font-name", "Cantarell")
# settings.set_property("gtk-icon-theme-name", "Oxygen")
cssProvider = Gtk.CssProvider()
cssProvider.load_from_path(os.path.join(glade_location(), 'glade/TncConfigApp.css'))
Gtk.StyleContext.add_provider_for_screen(
Gdk.Screen.get_default(),
cssProvider,
Gtk.STYLE_PROVIDER_PRIORITY_APPLICATION
)
self.main_window = self.builder.get_object("main_window")
self.main_window.connect("delete-event", self.close)
self.stack = self.builder.get_object("config_stack")
self.stack.set_sensitive(False)
self.sidebar = self.builder.get_object("config_sidebar")
self.sidebar.set_sensitive(False)
self.init_serial_port_combobox()
self.init_audio_input_frame()
self.init_audio_output_frame()
self.init_power_settings_frame()
self.init_kiss_parameters_frame()
self.init_modem_settings_frame()
self.init_tnc_information_frame()
self.init_update_firmware_frame()
self.init_save_settings_frame()
self.builder.connect_signals(self)
self.main_window.show()
self.visible_frame=None
self.change_visible_frame('audio_input')
Notify.init("TncConfigApp")
Gtk.main()
def __del__(self):
Notify.uninit()
def close(self, widget, data=None):
if self.tnc is not None:
self.tnc.disconnect()
self.tnc = None
Gtk.main_quit()
def need_save(self):
pass
### Main UI Section
def init_serial_port_combobox(self):
self.connect_button = self.builder.get_object("connect_button")
self.connect_button.set_sensitive(False)
self.serial_port_combo_box_text = self.builder.get_object("serial_port_combo_box_text")
assert(self.serial_port_combo_box_text is not None)
for port in serial.tools.list_ports.comports():
self.serial_port_combo_box_text.append_text(port[0])
def on_connect_button_toggled(self, widget):
if widget.get_active():
self.tnc = TncModel(self, self.device_path)
self.tnc.connect()
elif self.tnc is not None: # Possible race condition here...
self.tnc.disconnect()
self.tnc = None
def on_serial_port_combo_box_changed(self, widget, data = None):
self.device_path = widget.get_active_text()
self.connect_button.set_sensitive(True)
### GtkStack
def on_config_stack_visible_child_name_notify(self, widget, param):
# print("visible-child-name", widget.get_visible_child_name())
self.change_visible_frame(widget.get_visible_child_name())
def leave_frame(self, widget_name):
"""Dynamic dispatch to on_*_leave() function"""
getattr(self, "on_" + widget_name + "_leave")()
def enter_frame(self, widget_name):
"""Dynamic dispatch to on_*_enter() function"""
getattr(self, "on_" + widget_name + "_enter")()
def change_visible_frame(self, name):
if self.visible_frame == name: return
if self.visible_frame is not None:
self.leave_frame(self.visible_frame)
self.visible_frame = name
self.enter_frame(self.visible_frame)
### Audio Input...
def init_audio_input_frame(self):
self.audio_input_frame = self.builder.get_object("audio_input_frame")
self.audio_input_level_bar = self.builder.get_object("audio_input_level_bar")
self.audio_input_level_bar.add_offset_value("audio_input_level_bar-high", 10);
self.audio_input_level_bar.add_offset_value("audio_input_level_bar-medium", 8);
self.audio_input_level_bar.add_offset_value("audio_input_level_bar-low", 6);
self.input_attenuation_box = self.builder.get_object("input_attenuation_box")
self.input_attenuation_box.set_visible(False)
self.input_attenuation_check_button = self.builder.get_object("input_attenuation_check_button")
self.input_gain_box = self.builder.get_object("input_gain_box")
self.input_gain_box.set_visible(False)
self.input_gain_scale = self.builder.get_object("input_gain_scale")
self.input_gain_min_label = self.builder.get_object("input_gain_min_label")
self.input_gain_max_label = self.builder.get_object("input_gain_max_label")
self.input_twist_box = self.builder.get_object("input_twist_box")
self.input_twist_box.set_visible(False)
self.input_twist_scale = self.builder.get_object("input_twist_scale")
self.input_twist_min_label = self.builder.get_object("input_twist_min_label")
self.input_twist_max_label = self.builder.get_object("input_twist_max_label")
self.input_auto_adjust_button = self.builder.get_object("input_auto_adjust_button")
self.input_auto_adjust_button.set_visible(False)
self.last_audio_input_update_time = time.time()
def on_audio_input_enter(self):
self.last_audio_input_update_time = 0
if self.tnc is not None:
self.tnc.stream_audio_on()
def on_audio_input_leave(self):
# print('on_audio_input_leave')
if self.tnc is not None:
self.tnc.stream_audio_off()
def on_input_attenuation_check_button_toggled(self, widget):
self.tnc.set_input_atten(widget.get_active())
self.tnc.stream_audio_on()
def on_input_gain_adjustment_value_changed(self, widget):
now = time.time()
if now - self.last_audio_input_update_time > 0.1:
self.tnc.set_input_gain(int(widget.get_value()))
self.last_audio_input_update_time = now
def on_input_gain_scale_button_release_event(self, widget, data = None):
self.tnc.set_input_gain(int(widget.get_value()))
self.last_audio_input_update_time = time.time()
def on_input_twist_adjustment_value_changed(self, widget):
now = time.time()
if now - self.last_audio_input_update_time > 0.1:
self.tnc.set_input_twist(int(widget.get_value()))
self.last_audio_input_update_time = now
def on_input_twist_scale_button_release_event(self, widget, event, data = None):
self.tnc.set_input_twist(int(widget.get_value()))
self.last_audio_input_update_time = time.time()
def on_input_auto_adjust_button_clicked(self, widget):
self.tnc.adjust_input()
### Audio Output...
def init_audio_output_frame(self):
self.audio_output_frame = self.builder.get_object("audio_output_frame")
self.ptt_style_box = self.builder.get_object("ptt_style_box")
self.ptt_style_box.set_visible(False)
self.ptt_simplex_radio_button = self.builder.get_object("ptt_simplex_radio_button")
self.ptt_multiplex_radio_button = self.builder.get_object("ptt_multiplex_radio_button")
self.output_gain_scale = self.builder.get_object("output_gain_scale")
self.output_twist_box = self.builder.get_object("output_twist_box")
self.output_twist_box.set_visible(False)
self.output_twist_scale = self.builder.get_object("output_twist_scale")
self.mark_tone_radio_button = self.builder.get_object("mark_tone_radio_button")
self.space_tone_radio_button = self.builder.get_object("space_tone_radio_button")
self.both_tone_radio_button = self.builder.get_object("both_tone_radio_button")
self.transmit_toggle_button = self.builder.get_object("transmit_toggle_button")
self.last_audio_output_update_time = time.time()
def on_audio_output_enter(self):
# print('on_audio_output_enter')
pass
def on_audio_output_leave(self):
# print('on_audio_output_leave')
pass
def on_ptt_simplex_radio_button_toggled(self, widget):
if self.tnc is None:
return
self.tnc.set_ptt_channel(self.ptt_multiplex_radio_button.get_active())
self.need_save()
def on_ptt_multiplex_radio_button_toggled(self, widget):
"""Do not need to check both simplex and multiplex buttons"""
pass
def on_output_gain_adjustment_value_changed(self, widget):
now = time.time()
if now - self.last_audio_output_update_time >= .1:
# print('on_output_gain_adjustment_value_changed =', widget.get_value())
self.tnc.set_tx_volume(int(widget.get_value()))
self.last_audio_output_update_time = now
def on_output_gain_scale_button_release_event(self, widget, data = None):
self.tnc.set_tx_volume(int(widget.get_value()))
self.last_audio_output_update_time = time.time()
def on_output_twist_adjustment_value_changed(self, widget):
now = time.time()
if now - self.last_audio_output_update_time >= .1:
self.tnc.set_tx_twist(int(widget.get_value()))
self.last_audio_output_update_time = now
def on_output_twist_scale_button_release_event(self, widget, data = None):
self.tnc.set_tx_twist(int(widget.get_value()))
self.last_audio_output_update_time = time.time()
def on_mark_tone_radio_button_toggled(self, widget):
if widget.get_active():
self.tnc.set_mark(True)
self.tnc.set_space(False)
def on_space_tone_radio_button_toggled(self, widget):
if widget.get_active():
self.tnc.set_mark(False)
self.tnc.set_space(True)
def on_both_tone_radio_button_toggled(self, widget):
if widget.get_active():
self.tnc.set_mark(True)
self.tnc.set_space(True)
def on_transmit_toggle_button_toggled(self, widget):
if widget.get_active():
self.tnc.set_mark(self.mark_tone_radio_button.get_active() or self.both_tone_radio_button.get_active())
self.tnc.set_space(self.space_tone_radio_button.get_active() or self.both_tone_radio_button.get_active())
self.tnc.set_ptt(widget.get_active())
### Power Settings...
def init_power_settings_frame(self):
self.power_settings_frame = self.builder.get_object("power_settings_frame")
self.power_settings_frame.set_visible(False)
self.battery_voltage_label = self.builder.get_object("battery_voltage_label")
self.battery_level_bar = self.builder.get_object("battery_level_bar")
self.battery_level_bar.add_offset_value("audio_input_level_bar-high", 10);
self.battery_level_bar.add_offset_value("audio_input_level_bar-medium", 3);
self.battery_level_bar.add_offset_value("audio_input_level_bar-low", 1);
self.power_on_check_button = self.builder.get_object("power_on_check_button")
self.power_off_check_button = self.builder.get_object("power_off_check_button")
def on_power_settings_enter(self):
# print('on_power_settings_enter')
self.tnc.get_battery_level()
def on_power_settings_leave(self):
# print('on_power_settings_leave')
pass
def on_power_on_check_button_toggled(self, widget):
self.tnc.set_usb_on(widget.get_active())
def on_power_off_check_button_toggled(self, widget):
self.tnc.set_usb_off(widget.get_active())
### KISS Parameters...
def init_kiss_parameters_frame(self):
self.kiss_parameters_frame = self.builder.get_object("kiss_parameters_frame")
self.tx_delay_spin_button = self.builder.get_object("tx_delay_spin_button")
self.slot_time_spin_button = self.builder.get_object("slot_time_spin_button")
self.p_persist_spin_button = self.builder.get_object("p_persist_spin_button")
self.full_duplex_check_button = self.builder.get_object("full_duplex_check_button")
self.last_kiss_parameter_update_time = time.time()
def on_kiss_parameters_enter(self):
# print('on_kiss_parameters_enter')
pass
def on_kiss_parameters_leave(self):
# print('on_kiss_parameters_leave')
pass
def on_tx_delay_adjustment_value_changed(self, widget):
now = time.time()
if now - self.last_kiss_parameter_update_time >= .1:
self.tnc.set_tx_delay(int(widget.get_value()))
self.last_kiss_parameter_update_time = now
def on_tx_delay_spin_button_button_release_event(self, widget):
self.tnc.set_tx_delay(int(widget.get_value()))
self.last_kiss_parameter_update_time = time.time()
def on_slot_time_adjustment_value_changed(self, widget):
now = time.time()
if now - self.last_kiss_parameter_update_time >= .1:
self.tnc.set_time_slot(int(widget.get_value()))
self.last_kiss_parameter_update_time = now
def on_slot_time_spin_button_button_release_event(self, widget):
self.tnc.set_time_slot(int(widget.get_value()))
self.last_kiss_parameter_update_time = time.time()
def on_p_persistence_adjustment_value_changed(self, widget):
now = time.time()
if now - self.last_kiss_parameter_update_time >= .1:
self.tnc.set_persistence(int(widget.get_value()))
self.last_kiss_parameter_update_time = now
def on_p_persist_spin_button_button_release_event(self, widget):
self.tnc.set_persistence(int(widget.get_value()))
self.last_kiss_parameter_update_time = time.time()
def on_full_duplex_check_button_toggled(self, widget):
self.tnc.set_duplex(widget.get_active())
### Modem Settings...
def init_modem_settings_frame(self):
self.modem_settings_frame = self.builder.get_object("modem_settings_frame")
self.modem_settings_frame.set_visible(False)
self.dcd_check_button = self.builder.get_object("dcd_check_button")
self.connection_tracking_check_button = self.builder.get_object("connection_tracking_check_button")
self.verbose_output_check_button = self.builder.get_object("verbose_output_check_button")
def on_modem_settings_enter(self):
# print('on_modem_settings_enter')
pass
def on_modem_settings_leave(self):
# print('on_modem_settings_leave')
pass
def on_dcd_check_button_toggled(self, widget):
self.tnc.set_squelch_level((not widget.get_active()) * 2)
def on_connection_tracking_check_button_toggled(self, widget):
self.tnc.set_conn_track(widget.get_active())
def on_verbose_output_check_button_toggled(self, widget):
self.tnc.set_verbosity(widget.get_active())
### TNC Information...
def init_tnc_information_frame(self):
self.tnc_information_frame = self.builder.get_object("tnc_information_frame")
self.hardware_version_label = self.builder.get_object("hardware_version_label")
self.firmware_version_label = self.builder.get_object("firmware_version_label")
self.mac_address_label = self.builder.get_object("mac_address_label")
self.serial_number_label = self.builder.get_object("serial_number_label")
self.date_time_label = self.builder.get_object("date_time_label")
def on_tnc_information_enter(self):
# print('on_tnc_information_enter')
pass
def on_tnc_information_leave(self):
# print('on_tnc_information_leave')
pass
### Update Firmware...
def init_update_firmware_frame(self):
self.update_firmware_frame = self.builder.get_object("update_firmware_frame")
self.firmware_update_version_label = self.builder.get_object("firmware_update_version_label")
self.firmware_file_chooser_button = self.builder.get_object("firmware_file_chooser_button")
self.upload_button = self.builder.get_object("upload_button")
self.firmware_progress_bar = self.builder.get_object("firmware_progress_bar")
# File filter support in Glade is a bit janky. It does not properly
# associate the filter to the dialog unless it is done manually as
# done below, and there is no way to name the filter in Glade.
self.file_filter = self.builder.get_object("tnc1_2_file_filter")
self.file_filter.set_name("TNC1 & TNC2 Firmware (*.hex)")
self.firmware_file_chooser_button.add_filter(self.file_filter)
def on_update_firmware_enter(self):
# print('on_update_firmware_enter')
pass
def on_update_firmware_leave(self):
# print('on_update_firmware_leave')
pass
def on_firmware_file_chooser_button_file_set(self, widget, data=None):
self.firmware_file = self.firmware_file_chooser_button.get_filename()
self.upload_button.set_sensitive(True)
def on_upload_button_clicked(self, widget, data=None):
confirm = Gtk.MessageDialog(self.main_window, 0,
Gtk.MessageType.WARNING,
Gtk.ButtonsType.OK_CANCEL,
"""You are about to upload a firmware image to the TNC. This is irreversible and a potentially damaging operation. Please ensure that the TNC is plugged into USB power and that a valid firmware image for the device has been selected.
Are you sure that you wish to proceed?""")
confirm.set_title("Confirm Firmware Upload")
response = confirm.run()
confirm.destroy()
if response == Gtk.ResponseType.CANCEL:
return
self.firmware_upload_complete = None
self.firmware_gui_tag = GLib.idle_add(self.check_firmware_upload_complete)
self.sidebar.set_sensitive(False)
# print("firmware file =", self.firmware_file)
self.tnc.upload_firmware(self.firmware_file, self)
### Save Settings...
def init_save_settings_frame(self):
self.save_settings_frame = self.builder.get_object("save_settings_frame")
self.save_settings_frame.set_visible(False)
self.save_settings_button = self.builder.get_object("save_settings_button")
def on_save_settings_enter(self):
# print('on_save_settings_enter')
pass
def on_save_settings_leave(self):
# print('on_save_settings_leave')
pass
def on_save_settings_button_clicked(self, widget):
self.tnc.save_eeprom_settings()
### TNC events
def tnc_connect(self):
self.stack.set_visible_child_name('audio_input')
self.stack.set_sensitive(True)
self.sidebar.set_sensitive(True)
self.serial_port_combo_box_text.set_sensitive(False)
self.connect_button.set_label("gtk-disconnect")
self.firmware_progress_bar.set_text("Select firmware image...")
def tnc_disconnect(self):
self.stack.set_visible_child_name('audio_input')
self.stack.set_sensitive(False)
self.sidebar.set_sensitive(False)
self.serial_port_combo_box_text.set_sensitive(True)
self.connect_button.set_label("gtk-connect")
self.connect_button.set_active(False)
self.tnc = None
### Audio Input
def tnc_rx_volume(self, value):
self.audio_input_level_bar.set_value(value * 1.25)
def tnc_input_atten(self, value):
self.input_attenuation_box.set_visible(True)
self.input_attenuation_check_button.set_active(value > 0);
def tnc_input_gain(self, value):
self.input_gain_box.set_visible(True)
self.input_gain_scale.set_value(value);
def tnc_input_twist(self, value):
self.input_twist_box.set_visible(True)
self.input_twist_scale.set_value(value);
def tnc_min_input_twist(self, value):
self.input_twist_min_label.set_text("{}dB".format(value))
def tnc_max_input_twist(self, value):
self.input_twist_max_label.set_text("{}dB".format(value))
def tnc_min_input_gain(self, value):
self.input_gain_min_label.set_text("{}".format(value))
def tnc_max_input_gain(self, value):
self.input_gain_max_label.set_text("{}".format(value))
def tnc_adjust_input(self):
self.input_auto_adjust_button.set_visible(True)
self.input_auto_adjust_button.set_sensitive(True)
### Audio Output
def tnc_ptt_style(self, value):
self.ptt_style_box.set_visible(True)
if value == 0:
self.ptt_simplex_radio_button.set_active(True)
else:
self.ptt_multiplex_radio_button.set_active(True)
def tnc_tx_volume(self, gain):
self.output_gain_scale.set_value(gain)
def tnc_tx_twist(self, gain):
self.output_twist_box.set_visible(True)
self.output_twist_scale.set_value(gain)
### Power Settings
def tnc_battery_level(self, value):
self.power_settings_frame.set_visible(True)
self.battery_voltage_label.set_text(str(int(value)) + "mV")
level_bar_value = min(max(0, value - 3300) / 90.0, 10.0)
self.battery_level_bar.set_value(level_bar_value)
def tnc_power_on(self, value):
self.power_settings_frame.set_visible(True)
self.power_on_check_button.set_sensitive(True)
self.power_on_check_button.set_active(value)
def tnc_power_off(self, value):
self.power_settings_frame.set_visible(True)
self.power_off_check_button.set_sensitive(True)
self.power_off_check_button.set_active(value)
### KISS Parameters
def tnc_tx_delay(self, value):
self.tx_delay_spin_button.set_value(value)
def tnc_slot_time(self, value):
self.slot_time_spin_button.set_value(value)
def tnc_persistence(self, value):
self.p_persist_spin_button.set_value(value)
def tnc_tx_tail(self, value):
# No longer used or settable
pass
def tnc_duplex(self, value):
self.full_duplex_check_button.set_sensitive(True)
self.full_duplex_check_button.set_active(value)
### Modem Settings
def tnc_dcd(self, value):
self.modem_settings_frame.set_visible(True)
self.dcd_check_button.set_sensitive(True)
self.dcd_check_button.set_active(value == 0)
def tnc_conn_track(self, value):
self.modem_settings_frame.set_visible(True)
self.connection_tracking_check_button.set_sensitive(True)
self.connection_tracking_check_button.set_active(value)
def tnc_verbose(self, value):
self.modem_settings_frame.set_visible(True)
self.verbose_output_check_button.set_sensitive(True)
self.verbose_output_check_button.set_active(value)
### TNC Information
def tnc_hardware_version(self, value):
self.hardware_version_label.set_text(value)
def tnc_firmware_version(self, value):
self.firmware_version_label.set_text(value)
self.firmware_update_version_label.set_text(value)
def tnc_mac_address(self, value):
self.mac_address_label.set_text(value)
def tnc_serial_number(self, value):
self.serial_number_label.set_text(value)
def tnc_date_time(self, value):
self.date_time_label.set_text(value)
### Update Firmware
def tnc_dfu_firmware(self):
self.update_firmware_frame.set_visible(False)
### Save Settings
def tnc_eeprom_save(self):
self.save_settings_frame.set_visible(True)
self.save_settings_button.set_sensitive(True)
def do_exception_dialog(self, ex):
confirm = Gtk.MessageDialog(parent = self.main_window, flags = 0,
message_type = Gtk.MessageType.ERROR,
buttons = Gtk.ButtonsType.OK, text = str(ex))
confirm.set_title("Error")
confirm.run()
confirm.destroy()
def exception(self, ex):
# print(str(ex))
GLib.idle_add(self.do_exception_dialog, ex)
### Firmware Update Callbacks
def is_firmware_update_complete(self):
return self.firmware_upload_complete is not None
def firmware_set_steps(self, steps):
self.progress_bar_step = 1.0 / steps
# print("progress bar step: {}".format(self.progress_bar_step))
GLib.idle_add(self.firmware_progress_bar.set_pulse_step, self.progress_bar_step)
def firmware_writing(self):
self.progress_bar_progress = 0.0
GLib.idle_add(self.firmware_progress_bar.set_text, "Writing...")
GLib.idle_add(self.firmware_progress_bar.set_fraction, self.progress_bar_progress)
def firmware_verifying(self):
self.progress_bar_progress = 0.0
GLib.idle_add(self.firmware_progress_bar.set_text, "Verifying...")
GLib.idle_add(self.firmware_progress_bar.set_fraction, self.progress_bar_progress)
def firmware_pulse(self):
self.progress_bar_progress += self.progress_bar_step
# Pulse doesn't work for some unknown reason
# GLib.idle_add(self.firmware_progress_bar.pulse)
GLib.idle_add(self.firmware_progress_bar.set_fraction, self.progress_bar_progress)
def firmware_success(self):
self.firmware_upload_complete = True
# self.firmware_progress_bar.set_text("Firmware upload complete")
# self.sidebar.set_sensitive(True)
# self.tnc.disconnect()
def firmware_failure(self, msg):
self.firmware_upload_complete = False
self.firmware_upload_msg = msg
# self.firmware_progress_bar.set_text("Firmware upload failed")
# self.sidebar.set_sensitive(True)
def check_firmware_upload_complete(self):
if not self.is_firmware_update_complete():
self.firmware_gui_tag = GLib.timeout_add(1, self.check_firmware_upload_complete)
return
if self.firmware_upload_complete:
self.firmware_progress_bar.set_text("Firmware upload complete")
Notify.Notification.new("Firmware upload complete").show()
# self.tnc.disconnect()
else:
self.firmware_progress_bar.set_text("Firmware upload failed")
Notify.Notification.new("Firmware upload failed: {}".format(self.firmware_upload_msg)).show()
self.tnc.upload_firmware_complete()
self.sidebar.set_sensitive(True)
class TncConfigApp(object):
def __init__(self, device_path=None):
self.tnc = None
self.device_path = None
self.connect_message = None
self.builder = Gtk.Builder()
self.builder.add_from_file(
os.path.join(glade_location(), "glade/TncConfigApp.glade"))
# settings = Gtk.Settings.get_default()
# settings.set_property("gtk-font-name", "Cantarell")
# settings.set_property("gtk-icon-theme-name", "Oxygen")
# The version of GTK+ available to us on Windows is rather old and requires
# a different CSS file.
cssProvider = Gtk.CssProvider()
if os.name == 'nt':
cssProvider.load_from_path(
os.path.join(glade_location(), 'glade/TncConfigApp-win.css'))
else:
cssProvider.load_from_path(
os.path.join(glade_location(), 'glade/TncConfigApp.css'))
Gtk.StyleContext.add_provider_for_screen(
Gdk.Screen.get_default(), cssProvider,
Gtk.STYLE_PROVIDER_PRIORITY_APPLICATION)
self.main_window = self.builder.get_object("main_window")
self.main_window.connect("delete-event", self.close)
self.stack = self.builder.get_object("config_stack")
self.stack.set_sensitive(False)
self.sidebar = self.builder.get_object("config_sidebar")
self.sidebar.set_sensitive(False)
self.modem_types = {
1: "1200 baud AFSK",
2: "300 baud AFSK",
3: "9600 baud G3RUH/GFSK",
5: "M17 4-FSK"
}
self.supported_modem_types = {}
self.init_audio_input_frame()
self.init_audio_output_frame()
self.init_power_settings_frame()
self.init_kiss_parameters_frame()
self.init_modem_settings_frame()
self.init_tnc_information_frame()
self.init_update_firmware_frame()
self.init_save_settings_frame()
self.init_about_frame()
self.builder.connect_signals(self)
self.init_serial_port_combobox()
self.main_window.show()
self.visible_frame = None
self.change_visible_frame('about')
self.stack.set_visible_child_name('about')
Notify.init("TncConfigApp")
Gtk.main()
def __del__(self):
Notify.uninit()
def close(self, widget, data=None):
if self.tnc is not None:
self.tnc.disconnect()
self.tnc = None
Gtk.main_quit()
def get_modem_number(self, modem_name):
for number, name in self.modem_types.items():
if name == modem_name:
return number
else:
return None
def need_save(self):
pass
### Main UI Section
def init_serial_port_combobox(self):
self.connect_button = self.builder.get_object("connect_button")
self.connect_button.set_sensitive(False)
self.serial_port_combo_box_text = self.builder.get_object(
"serial_port_combo_box_text")
assert (self.serial_port_combo_box_text is not None)
for port in serial.tools.list_ports.comports():
self.serial_port_combo_box_text.append_text(port[0])
def on_connect_button_toggled(self, widget):
if widget.get_active():
self.tnc = TncModel(self, self.device_path)
self.tnc.connect()
elif self.tnc is not None: # Possible race condition here...
self.tnc.disconnect()
self.tnc = None
def on_serial_port_combo_box_changed(self, widget, data=None):
self.device_path = widget.get_active_text()
self.connect_button.set_sensitive(True)
### GtkStack
def on_config_stack_visible_child_name_notify(self, widget, param):
# print("visible-child-name", widget.get_visible_child_name())
self.change_visible_frame(widget.get_visible_child_name())
def leave_frame(self, widget_name):
"""Dynamic dispatch to on_*_leave() function"""
getattr(self, "on_" + widget_name + "_leave")()
def enter_frame(self, widget_name):
"""Dynamic dispatch to on_*_enter() function"""
getattr(self, "on_" + widget_name + "_enter")()
def change_visible_frame(self, name):
if self.visible_frame == name: return
if self.visible_frame is not None:
self.leave_frame(self.visible_frame)
self.visible_frame = name
self.enter_frame(self.visible_frame)
### Audio Input...
def init_audio_input_frame(self):
self.audio_input_frame = self.builder.get_object("audio_input_frame")
self.audio_input_level_bar = self.builder.get_object(
"audio_input_level_bar")
self.audio_input_level_bar.add_offset_value(
"audio_input_level_bar-high", 10)
self.audio_input_level_bar.add_offset_value(
"audio_input_level_bar-medium", 8)
self.audio_input_level_bar.add_offset_value(
"audio_input_level_bar-low", 6)
self.input_attenuation_box = self.builder.get_object(
"input_attenuation_box")
self.input_attenuation_box.set_visible(False)
self.input_attenuation_check_button = self.builder.get_object(
"input_attenuation_check_button")
self.input_gain_box = self.builder.get_object("input_gain_box")
self.input_gain_box.set_visible(False)
self.input_gain_scale = self.builder.get_object("input_gain_scale")
self.input_gain_min_label = self.builder.get_object(
"input_gain_min_label")
self.input_gain_max_label = self.builder.get_object(
"input_gain_max_label")
self.input_twist_box = self.builder.get_object("input_twist_box")
self.input_twist_box.set_visible(False)
self.input_twist_scale = self.builder.get_object("input_twist_scale")
self.input_twist_min_label = self.builder.get_object(
"input_twist_min_label")
self.input_twist_max_label = self.builder.get_object(
"input_twist_max_label")
self.input_auto_adjust_button = self.builder.get_object(
"input_auto_adjust_button")
self.input_auto_adjust_button.set_visible(False)
self.last_audio_input_update_time = time.time()
def on_audio_input_enter(self):
self.last_audio_input_update_time = 0
if self.tnc is not None and self.connect_button.get_active():
self.tnc.stream_audio_on()
def on_audio_input_leave(self):
# print('on_audio_input_leave')
if self.tnc is not None:
self.tnc.stream_audio_off()
def on_input_attenuation_check_button_toggled(self, widget):
self.tnc.set_input_atten(widget.get_active())
self.tnc.stream_audio_on()
def on_input_gain_adjustment_value_changed(self, widget):
now = time.time()
if now - self.last_audio_input_update_time > 0.1:
self.tnc.set_input_gain(int(widget.get_value()))
self.last_audio_input_update_time = now
def on_input_gain_scale_button_release_event(self, widget, data=None):
self.tnc.set_input_gain(int(widget.get_value()))
self.last_audio_input_update_time = time.time()
def on_input_twist_adjustment_value_changed(self, widget):
now = time.time()
if now - self.last_audio_input_update_time > 0.1:
self.tnc.set_input_twist(int(widget.get_value()))
self.last_audio_input_update_time = now
def on_input_twist_scale_button_release_event(self,
widget,
event,
data=None):
self.tnc.set_input_twist(int(widget.get_value()))
self.last_audio_input_update_time = time.time()
def on_input_auto_adjust_button_clicked(self, widget):
self.tnc.adjust_input()
### Audio Output...
def init_audio_output_frame(self):
self.audio_output_frame = self.builder.get_object("audio_output_frame")
self.ptt_style_box = self.builder.get_object("ptt_style_box")
self.ptt_style_box.set_visible(False)
self.ptt_simplex_radio_button = self.builder.get_object(
"ptt_simplex_radio_button")
self.ptt_multiplex_radio_button = self.builder.get_object(
"ptt_multiplex_radio_button")
self.output_gain_scale = self.builder.get_object("output_gain_scale")
self.output_twist_box = self.builder.get_object("output_twist_box")
self.output_twist_box.set_visible(False)
self.output_twist_scale = self.builder.get_object("output_twist_scale")
self.mark_tone_radio_button = self.builder.get_object(
"mark_tone_radio_button")
self.space_tone_radio_button = self.builder.get_object(
"space_tone_radio_button")
self.both_tone_radio_button = self.builder.get_object(
"both_tone_radio_button")
self.transmit_toggle_button = self.builder.get_object(
"transmit_toggle_button")
self.last_audio_output_update_time = time.time()
def on_audio_output_enter(self):
# print('on_audio_output_enter')
pass
def on_audio_output_leave(self):
# print('on_audio_output_leave')
pass
def on_ptt_simplex_radio_button_toggled(self, widget):
if self.tnc is None:
return
self.tnc.set_ptt_channel(self.ptt_multiplex_radio_button.get_active())
self.need_save()
def on_ptt_multiplex_radio_button_toggled(self, widget):
"""Do not need to check both simplex and multiplex buttons"""
pass
def on_output_gain_adjustment_value_changed(self, widget):
now = time.time()
if now - self.last_audio_output_update_time >= .1:
# print('on_output_gain_adjustment_value_changed =', widget.get_value())
self.tnc.set_tx_volume(int(widget.get_value()))
self.last_audio_output_update_time = now
def on_output_gain_scale_button_release_event(self, widget, data=None):
self.tnc.set_tx_volume(int(widget.get_value()))
self.last_audio_output_update_time = time.time()
def on_output_twist_adjustment_value_changed(self, widget):
now = time.time()
if now - self.last_audio_output_update_time >= .1:
self.tnc.set_tx_twist(int(widget.get_value()))
self.last_audio_output_update_time = now
def on_output_twist_scale_button_release_event(self, widget, data=None):
self.tnc.set_tx_twist(int(widget.get_value()))
self.last_audio_output_update_time = time.time()
def on_mark_tone_radio_button_toggled(self, widget):
if widget.get_active():
self.tnc.set_mark(True)
self.tnc.set_space(False)
def on_space_tone_radio_button_toggled(self, widget):
if widget.get_active():
self.tnc.set_mark(False)
self.tnc.set_space(True)
def on_both_tone_radio_button_toggled(self, widget):
if widget.get_active():
self.tnc.set_mark(True)
self.tnc.set_space(True)
def on_transmit_toggle_button_toggled(self, widget):
if widget.get_active():
self.tnc.set_mark(self.mark_tone_radio_button.get_active()
or self.both_tone_radio_button.get_active())
self.tnc.set_space(self.space_tone_radio_button.get_active()
or self.both_tone_radio_button.get_active())
self.tnc.set_ptt(widget.get_active())
### Power Settings...
def init_power_settings_frame(self):
self.power_settings_frame = self.builder.get_object(
"power_settings_frame")
self.power_settings_frame.set_visible(False)
self.battery_voltage_label = self.builder.get_object(
"battery_voltage_label")
self.battery_level_bar = self.builder.get_object("battery_level_bar")
self.battery_level_bar.add_offset_value("audio_input_level_bar-high",
10)
self.battery_level_bar.add_offset_value("audio_input_level_bar-medium",
3)
self.battery_level_bar.add_offset_value("audio_input_level_bar-low", 1)
self.power_on_check_button = self.builder.get_object(
"power_on_check_button")
self.power_off_check_button = self.builder.get_object(
"power_off_check_button")
def on_power_settings_enter(self):
# print('on_power_settings_enter')
self.tnc.get_battery_level()
def on_power_settings_leave(self):
# print('on_power_settings_leave')
pass
def on_power_on_check_button_toggled(self, widget):
self.tnc.set_usb_on(widget.get_active())
def on_power_off_check_button_toggled(self, widget):
self.tnc.set_usb_off(widget.get_active())
### KISS Parameters...
def init_kiss_parameters_frame(self):
self.kiss_parameters_frame = self.builder.get_object(
"kiss_parameters_frame")
self.tx_delay_spin_button = self.builder.get_object(
"tx_delay_spin_button")
self.slot_time_spin_button = self.builder.get_object(
"slot_time_spin_button")
self.p_persist_spin_button = self.builder.get_object(
"p_persist_spin_button")
self.full_duplex_check_button = self.builder.get_object(
"full_duplex_check_button")
self.last_kiss_parameter_update_time = time.time()
def on_kiss_parameters_enter(self):
# print('on_kiss_parameters_enter')
pass
def on_kiss_parameters_leave(self):
# print('on_kiss_parameters_leave')
pass
def on_tx_delay_adjustment_value_changed(self, widget):
now = time.time()
if now - self.last_kiss_parameter_update_time >= .1:
self.tnc.set_tx_delay(int(widget.get_value()))
self.last_kiss_parameter_update_time = now
def on_tx_delay_spin_button_button_release_event(self, widget, event):
self.tnc.set_tx_delay(int(widget.get_value()))
self.last_kiss_parameter_update_time = time.time()
def on_slot_time_adjustment_value_changed(self, widget):
now = time.time()
if now - self.last_kiss_parameter_update_time >= .1:
self.tnc.set_time_slot(int(widget.get_value()))
self.last_kiss_parameter_update_time = now
def on_slot_time_spin_button_button_release_event(self, widget, event):
self.tnc.set_time_slot(int(widget.get_value()))
self.last_kiss_parameter_update_time = time.time()
def on_p_persistence_adjustment_value_changed(self, widget):
now = time.time()
if now - self.last_kiss_parameter_update_time >= .1:
self.tnc.set_persistence(int(widget.get_value()))
self.last_kiss_parameter_update_time = now
def on_p_persist_spin_button_button_release_event(self, widget, event):
self.tnc.set_persistence(int(widget.get_value()))
self.last_kiss_parameter_update_time = time.time()
def on_full_duplex_check_button_toggled(self, widget):
self.tnc.set_duplex(widget.get_active())
### Modem Settings...
def init_modem_settings_frame(self):
self.modem_settings_frame = self.builder.get_object(
"modem_settings_frame")
self.modem_settings_frame.set_visible(False)
self.dcd_check_button = self.builder.get_object("dcd_check_button")
self.connection_tracking_check_button = self.builder.get_object(
"connection_tracking_check_button")
self.verbose_output_check_button = self.builder.get_object(
"verbose_output_check_button")
self.passall_check_button = self.builder.get_object(
"passall_check_button")
self.modem_type_combo_box_text = self.builder.get_object(
"modem_type_combo_box_text")
self.rx_reverse_polarity_check_button = self.builder.get_object(
"rx_reverse_polarity_check_button")
self.tx_reverse_polarity_check_button = self.builder.get_object(
"tx_reverse_polarity_check_button")
self.modem_settings_active = False
def on_modem_settings_enter(self):
# print('on_modem_settings_enter')
self.modem_settings_active = True
def on_modem_settings_leave(self):
# print('on_modem_settings_leave')
self.modem_settings_active = False
def on_dcd_check_button_toggled(self, widget):
self.tnc.set_squelch_level((not widget.get_active()) * 2)
def on_connection_tracking_check_button_toggled(self, widget):
self.tnc.set_conn_track(widget.get_active())
def on_verbose_output_check_button_toggled(self, widget):
self.tnc.set_verbosity(widget.get_active())
def on_passall_check_button_toggled(self, widget):
self.tnc.set_passall(widget.get_active())
def on_rx_reverse_polarity_check_button_toggled(self, widget):
if self.tx_reverse_polarity_check_button.get_visible():
self.tnc.set_rx_reverse_polarity(widget.get_active())
def on_tx_reverse_polarity_check_button_toggled(self, widget):
if self.rx_reverse_polarity_check_button.get_visible():
self.tnc.set_tx_reverse_polarity(widget.get_active())
def on_modem_type_combo_box_text_changed(self, widget):
modem_number = self.get_modem_number(widget.get_active_text())
if modem_number is None: return
if self.modem_settings_active:
# User interaction.
self.tnc.set_modem_type(modem_number)
### TNC Information...
def init_tnc_information_frame(self):
self.tnc_information_frame = self.builder.get_object(
"tnc_information_frame")
self.hardware_version_label = self.builder.get_object(
"hardware_version_label")
self.firmware_version_label = self.builder.get_object(
"firmware_version_label")
self.mac_address_label = self.builder.get_object("mac_address_label")
self.serial_number_label = self.builder.get_object(
"serial_number_label")
self.date_time_label = self.builder.get_object("date_time_label")
def on_tnc_information_enter(self):
# print('on_tnc_information_enter')
pass
def on_tnc_information_leave(self):
# print('on_tnc_information_leave')
pass
### Update Firmware...
def init_update_firmware_frame(self):
self.update_firmware_frame = self.builder.get_object(
"update_firmware_frame")
self.firmware_update_version_label = self.builder.get_object(
"firmware_update_version_label")
self.firmware_file_chooser_button = self.builder.get_object(
"firmware_file_chooser_button")
self.upload_button = self.builder.get_object("upload_button")
self.firmware_progress_bar = self.builder.get_object(
"firmware_progress_bar")
# File filter support in Glade is a bit janky. It does not properly
# associate the filter to the dialog unless it is done manually as
# done below, and there is no way to name the filter in Glade.
self.file_filter = self.builder.get_object("tnc1_2_file_filter")
self.file_filter.set_name("TNC1 & TNC2 Firmware (*.hex)")
self.firmware_file_chooser_button.add_filter(self.file_filter)
def on_update_firmware_enter(self):
# print('on_update_firmware_enter')
pass
def on_update_firmware_leave(self):
# print('on_update_firmware_leave')
pass
def on_firmware_file_chooser_button_file_set(self, widget, data=None):
self.firmware_file = self.firmware_file_chooser_button.get_filename()
self.upload_button.set_sensitive(True)
def on_upload_button_clicked(self, widget, data=None):
confirm = Gtk.MessageDialog(
parent=self.main_window,
flags=0,
message_type=Gtk.MessageType.WARNING,
buttons=Gtk.ButtonsType.OK_CANCEL,
text="".join([
'You are about to upload a firmware image to the TNC. ',
'This is irreversible and a potentially damaging operation. ',
'Please ensure that the TNC is plugged into USB power and ',
'that a valid firmware image for the device has been selected.',
'\n\nAre you sure that you wish to proceed?'
]))
confirm.set_title("Confirm Firmware Upload")
response = confirm.run()
confirm.destroy()
if response == Gtk.ResponseType.CANCEL:
return
self.firmware_upload_complete = None
self.firmware_gui_tag = GLib.idle_add(
self.check_firmware_upload_complete)
self.sidebar.set_sensitive(False)
# print("firmware file =", self.firmware_file)
self.tnc.upload_firmware(self.firmware_file, self)
### Save Settings...
def init_save_settings_frame(self):
self.save_settings_frame = self.builder.get_object(
"save_settings_frame")
self.save_settings_frame.set_visible(False)
self.save_settings_button = self.builder.get_object(
"save_settings_button")
def on_save_settings_enter(self):
# print('on_save_settings_enter')
pass
def on_save_settings_leave(self):
# print('on_save_settings_leave')
pass
def on_save_settings_button_clicked(self, widget):
self.tnc.save_eeprom_settings()
def init_about_frame(self):
self.about_frame = self.builder.get_object("about_frame")
self.about_frame.set_visible(True)
def on_about_enter(self):
# print('on_save_settings_leave')
pass
def on_about_leave(self):
# print('on_save_settings_leave')
pass
### TNC events
def tnc_connect(self):
self.stack.set_visible_child_name('audio_input')
self.stack.set_sensitive(True)
self.sidebar.set_sensitive(True)
self.serial_port_combo_box_text.set_sensitive(False)
self.connect_button.set_label("gtk-disconnect")
self.firmware_progress_bar.set_text("Select firmware image...")
def tnc_disconnect(self):
self.stack.set_visible_child_name('about')
self.stack.set_sensitive(False)
self.sidebar.set_sensitive(False)
self.serial_port_combo_box_text.set_sensitive(True)
self.connect_button.set_label("gtk-connect")
self.connect_button.set_active(False)
self.tnc = None
self.modem_type = None
### Audio Input
def tnc_rx_volume(self, value):
self.audio_input_level_bar.set_value(min(10, int(value * 1.25 + .5)))
def tnc_input_atten(self, value):
self.input_attenuation_box.set_visible(True)
self.input_attenuation_check_button.set_active(value > 0)
def tnc_input_gain(self, value):
self.input_gain_box.set_visible(True)
self.input_gain_scale.set_value(value)
def tnc_input_twist(self, value):
self.input_twist_box.set_visible(True)
self.input_twist_scale.set_value(value)
def tnc_min_input_twist(self, value):
self.input_twist_min_label.set_text("{}dB".format(value))
def tnc_max_input_twist(self, value):
self.input_twist_max_label.set_text("{}dB".format(value))
def tnc_min_input_gain(self, value):
self.input_gain_min_label.set_text("{}".format(value))
def tnc_max_input_gain(self, value):
self.input_gain_max_label.set_text("{}".format(value))
def tnc_adjust_input(self):
self.input_auto_adjust_button.set_visible(True)
self.input_auto_adjust_button.set_sensitive(True)
### Audio Output
def tnc_ptt_style(self, value):
self.ptt_style_box.set_visible(True)
if value == 0:
self.ptt_simplex_radio_button.set_active(True)
else:
self.ptt_multiplex_radio_button.set_active(True)
def tnc_tx_volume(self, gain):
self.output_gain_scale.set_value(gain)
def tnc_tx_twist(self, gain):
self.output_twist_box.set_visible(True)
self.output_twist_scale.set_value(gain)
### Power Settings
def tnc_battery_level(self, value):
self.power_settings_frame.set_visible(True)
self.battery_voltage_label.set_text(str(int(value)) + "mV")
level_bar_value = min(max(0, value - 3300) / 90.0, 10.0)
self.battery_level_bar.set_value(level_bar_value)
def tnc_power_on(self, value):
self.power_settings_frame.set_visible(True)
self.power_on_check_button.set_sensitive(True)
self.power_on_check_button.set_active(value)
def tnc_power_off(self, value):
self.power_settings_frame.set_visible(True)
self.power_off_check_button.set_sensitive(True)
self.power_off_check_button.set_active(value)
### KISS Parameters
def tnc_tx_delay(self, value):
self.tx_delay_spin_button.set_value(value)
def tnc_slot_time(self, value):
self.slot_time_spin_button.set_value(value)
def tnc_persistence(self, value):
self.p_persist_spin_button.set_value(value)
def tnc_tx_tail(self, value):
# No longer used or settable
pass
def tnc_duplex(self, value):
self.full_duplex_check_button.set_sensitive(True)
self.full_duplex_check_button.set_active(value)
### Modem Settings
def tnc_dcd(self, value):
self.modem_settings_frame.set_visible(True)
self.dcd_check_button.set_sensitive(True)
self.dcd_check_button.set_active(value == 0)
def tnc_conn_track(self, value):
self.modem_settings_frame.set_visible(True)
self.connection_tracking_check_button.set_sensitive(True)
self.connection_tracking_check_button.set_active(value)
def tnc_verbose(self, value):
self.modem_settings_frame.set_visible(True)
self.verbose_output_check_button.set_sensitive(True)
self.verbose_output_check_button.set_active(value)
def tnc_supported_modem_types(self, value):
self.modem_settings_frame.set_visible(True)
self.modem_type_combo_box_text.remove_all()
self.supported_modem_types = {}
for i, v in enumerate(value):
if v in self.modem_types:
self.supported_modem_types[v] = i
self.modem_type_combo_box_text.append_text(self.modem_types[v])
if self.modem_type is not None:
self.modem_type_combo_box_text.set_active(
self.supported_modem_types[self.modem_type])
self.modem_type_combo_box_text.set_visible(True)
self.modem_type_combo_box_text.set_sensitive(True)
def tnc_selected_modem_type(self, value):
print("selected modem type is %d = %s" %
(value, self.modem_types[value]))
self.modem_settings_frame.set_visible(True)
self.modem_type_combo_box_text.set_sensitive(True)
self.modem_type = value
if value in self.modem_types and value in self.supported_modem_types and self.modem_type_combo_box_text.get_visible(
):
self.modem_type_combo_box_text.set_active(
self.supported_modem_types[self.modem_type])
def tnc_rx_reverse_polarity(self, value):
self.modem_settings_frame.set_visible(True)
self.rx_reverse_polarity_check_button.set_active(value)
self.rx_reverse_polarity_check_button.set_visible(True)
self.rx_reverse_polarity_check_button.set_sensitive(True)
def tnc_tx_reverse_polarity(self, value):
self.modem_settings_frame.set_visible(True)
self.tx_reverse_polarity_check_button.set_active(value)
self.tx_reverse_polarity_check_button.set_visible(True)
self.tx_reverse_polarity_check_button.set_sensitive(True)
def tnc_passall(self, value):
self.modem_settings_frame.set_visible(True)
self.passall_check_button.set_visible(True)
self.passall_check_button.set_sensitive(True)
self.passall_check_button.set_active(value)
### TNC Information
def tnc_hardware_version(self, value):
self.hardware_version_label.set_text(value)
def tnc_firmware_version(self, value):
self.firmware_version_label.set_text(value)
self.firmware_update_version_label.set_text(value)
def tnc_mac_address(self, value):
self.mac_address_label.set_text(value)
def tnc_serial_number(self, value):
self.serial_number_label.set_text(value)
def tnc_date_time(self, value):
self.date_time_label.set_text(value)
### Update Firmware
def tnc_dfu_firmware(self):
self.update_firmware_frame.set_visible(False)
### Save Settings
def tnc_eeprom_save(self):
self.save_settings_frame.set_visible(True)
self.save_settings_button.set_sensitive(True)
def do_exception_dialog(self, ex):
confirm = Gtk.MessageDialog(parent=self.main_window,
flags=0,
message_type=Gtk.MessageType.ERROR,
buttons=Gtk.ButtonsType.OK,
text=str(ex))
confirm.set_title("Error")
confirm.run()
confirm.destroy()
def exception(self, ex):
# print(str(ex))
GLib.idle_add(self.do_exception_dialog, ex)
### Firmware Update Callbacks
def is_firmware_update_complete(self):
return self.firmware_upload_complete is not None
def firmware_set_steps(self, steps):
self.progress_bar_step = 1.0 / steps
# print("progress bar step: {}".format(self.progress_bar_step))
GLib.idle_add(self.firmware_progress_bar.set_pulse_step,
self.progress_bar_step)
def firmware_writing(self):
self.progress_bar_progress = 0.0
GLib.idle_add(self.firmware_progress_bar.set_text, "Writing...")
GLib.idle_add(self.firmware_progress_bar.set_fraction,
self.progress_bar_progress)
def firmware_verifying(self):
self.progress_bar_progress = 0.0
GLib.idle_add(self.firmware_progress_bar.set_text, "Verifying...")
GLib.idle_add(self.firmware_progress_bar.set_fraction,
self.progress_bar_progress)
def firmware_pulse(self):
self.progress_bar_progress += self.progress_bar_step
# Pulse doesn't work for some unknown reason
# GLib.idle_add(self.firmware_progress_bar.pulse)
GLib.idle_add(self.firmware_progress_bar.set_fraction,
self.progress_bar_progress)
def firmware_success(self):
self.firmware_upload_complete = True
# self.firmware_progress_bar.set_text("Firmware upload complete")
# self.sidebar.set_sensitive(True)
# self.tnc.disconnect()
def firmware_failure(self, msg):
self.firmware_upload_complete = False
self.firmware_upload_msg = msg
# self.firmware_progress_bar.set_text("Firmware upload failed")
# self.sidebar.set_sensitive(True)
def firmware_success_dialog(self):
notify = Gtk.MessageDialog(parent=self.main_window,
flags=0,
message_type=Gtk.MessageType.INFO,
buttons=Gtk.ButtonsType.OK,
text="Firmware upload complete")
notify.set_title("Firmware Update")
notify.run()
notify.destroy()
def firmware_failure_dialog(self):
notify = Gtk.MessageDialog(parent=self.main_window,
flags=0,
message_type=Gtk.MessageType.ERROR,
buttons=Gtk.ButtonsType.OK,
text="Firmware upload failed: {}".format(
self.firmware_upload_msg))
notify.set_title("Firmware Update")
notify.run()
notify.destroy()
def check_firmware_upload_complete(self):
if not self.is_firmware_update_complete():
self.firmware_gui_tag = GLib.timeout_add(
1, self.check_firmware_upload_complete)
return
if self.firmware_upload_complete:
self.firmware_progress_bar.set_text("Firmware upload complete")
self.firmware_success_dialog()
# self.tnc.disconnect()
else:
self.firmware_progress_bar.set_text("Firmware upload failed")
self.firmware_failure_dialog()
self.tnc.upload_firmware_complete()
self.stack.set_visible_child_name('audio_input')
self.stack.set_sensitive(True)
self.sidebar.set_sensitive(True)
