def _inner():
            if initial_delay:
                greenthread.sleep(initial_delay)

            try:
                while self._running:
                    start = timeutils.utcnow()
                    self.f(*self.args, **self.kw)
                    end = timeutils.utcnow()
                    if not self._running:
                        break
                    delay = interval - timeutils.delta_seconds(start, end)
                    if delay <= 0:
                        LOG.warn(_('task run outlasted interval by %s sec') %
                                 -delay)
                    greenthread.sleep(delay if delay > 0 else 0)
            except LoopingCallDone as e:
                self.stop()
                done.send(e.retvalue)
            except Exception:
                LOG.exception(_('in fixed duration looping call'))
                done.send_exception(*sys.exc_info())
                return
            else:
                done.send(True)
Example #2
0
def _multi_send(method, context, topic, msg, timeout=None,
                envelope=False, _msg_id=None):
    """Wraps the sending of messages.

    Dispatches to the matchmaker and sends message to all relevant hosts.
    """
    conf = CONF
    LOG.debug("%(msg)s" % {'msg': ' '.join(map(pformat, (topic, msg)))})

    queues = _get_matchmaker().queues(topic)
    LOG.debug("Sending message(s) to: %s", queues)

    # Don't stack if we have no matchmaker results
    if not queues:
        LOG.warn(_("No matchmaker results. Not casting."))
        # While not strictly a timeout, callers know how to handle
        # this exception and a timeout isn't too big a lie.
        raise rpc_common.Timeout(_("No match from matchmaker."))

    # This supports brokerless fanout (addresses > 1)
    for queue in queues:
        (_topic, ip_addr) = queue
        _addr = "tcp://%s:%s" % (ip_addr, conf.rpc_zmq_port)

        if method.__name__ == '_cast':
            eventlet.spawn_n(method, _addr, context,
                             _topic, msg, timeout, envelope,
                             _msg_id)
            return
        return method(_addr, context, _topic, msg, timeout,
                      envelope)
Example #3
0
def _parse_check(rule):
    """
    Parse a single base check rule into an appropriate Check object.
    """

    # Handle the special checks
    if rule == '!':
        return FalseCheck()
    elif rule == '@':
        return TrueCheck()

    try:
        kind, match = rule.split(':', 1)
    except Exception:
        LOG.exception(_("Failed to understand rule %(rule)s") % locals())
        # If the rule is invalid, we'll fail closed
        return FalseCheck()

    # Find what implements the check
    if kind in _checks:
        return _checks[kind](kind, match)
    elif None in _checks:
        return _checks[None](kind, match)
    else:
        LOG.error(_("No handler for matches of kind %s") % kind)
        return FalseCheck()
Example #4
0
    def consume(self, sock):
        #TODO(ewindisch): use zero-copy (i.e. references, not copying)
        data = sock.recv()
        LOG.debug(_("CONSUMER RECEIVED DATA: %s"), data)

        proxy = self.proxies[sock]

        if data[2] == 'cast':  # Legacy protocol
            packenv = data[3]

            ctx, msg = _deserialize(packenv)
            request = rpc_common.deserialize_msg(msg)
            ctx = RpcContext.unmarshal(ctx)
        elif data[2] == 'impl_zmq_v2':
            packenv = data[4:]

            msg = unflatten_envelope(packenv)
            request = rpc_common.deserialize_msg(msg)

            # Unmarshal only after verifying the message.
            ctx = RpcContext.unmarshal(data[3])
        else:
            LOG.error(_("ZMQ Envelope version unsupported or unknown."))
            return

        self.pool.spawn_n(self.process, proxy, ctx, request)
Example #5
0
    def create_consumer(self, topic, proxy, fanout=False):
        # Register with matchmaker.
        _get_matchmaker().register(topic, CONF.rpc_zmq_host)

        # Subscription scenarios
        if fanout:
            sock_type = zmq.SUB
            subscribe = ('', fanout)[type(fanout) == str]
            topic = 'fanout~' + topic.split('.', 1)[0]
        else:
            sock_type = zmq.PULL
            subscribe = None
            topic = '.'.join((topic.split('.', 1)[0], CONF.rpc_zmq_host))

        if topic in self.topics:
            LOG.info(_("Skipping topic registration. Already registered."))
            return

        # Receive messages from (local) proxy
        inaddr = "ipc://%s/zmq_topic_%s" % \
            (CONF.rpc_zmq_ipc_dir, topic)

        LOG.debug(_("Consumer is a zmq.%s"),
                  ['PULL', 'SUB'][sock_type == zmq.SUB])

        self.reactor.register(proxy, inaddr, sock_type,
                              subscribe=subscribe, in_bind=False)
        self.topics.append(topic)
Example #6
0
    def consume_in_thread(self):
        """Runs the ZmqProxy service."""
        ipc_dir = CONF.rpc_zmq_ipc_dir
        consume_in = "tcp://%s:%s" % \
            (CONF.rpc_zmq_bind_address,
             CONF.rpc_zmq_port)
        consumption_proxy = InternalContext(None)

        try:
            os.makedirs(ipc_dir)
        except os.error:
            if not os.path.isdir(ipc_dir):
                with excutils.save_and_reraise_exception():
                    LOG.error(_("Required IPC directory does not exist at"
                                " %s") % (ipc_dir, ))
        try:
            self.register(consumption_proxy,
                          consume_in,
                          zmq.PULL)
        except zmq.ZMQError:
            if os.access(ipc_dir, os.X_OK):
                with excutils.save_and_reraise_exception():
                    LOG.error(_("Permission denied to IPC directory at"
                                " %s") % (ipc_dir, ))
            with excutils.save_and_reraise_exception():
                LOG.error(_("Could not create ZeroMQ receiver daemon. "
                            "Socket may already be in use."))

        super(ZmqProxy, self).consume_in_thread()
Example #7
0
    def _start_child(self, wrap):
        if len(wrap.forktimes) > wrap.workers:
            # Limit ourselves to one process a second (over the period of
            # number of workers * 1 second). This will allow workers to
            # start up quickly but ensure we don't fork off children that
            # die instantly too quickly.
            if time.time() - wrap.forktimes[0] < wrap.workers:
                LOG.info(_('Forking too fast, sleeping'))
                time.sleep(1)

            wrap.forktimes.pop(0)

        wrap.forktimes.append(time.time())

        pid = os.fork()
        if pid == 0:
            launcher = self._child_process(wrap.service)
            while True:
                self._child_process_handle_signal()
                status, signo = self._child_wait_for_exit_or_signal(launcher)
                if not _is_sighup_and_daemon(signo):
                    break
                launcher.restart()

            os._exit(status)

        LOG.info(_('Started child %d'), pid)

        wrap.children.add(pid)
        self.children[pid] = wrap

        return pid
    def reconnect(self):
        """Handles reconnecting and re-establishing sessions and queues"""
        if self.connection.opened():
            try:
                self.connection.close()
            except qpid.messaging.exceptions.ConnectionError:
                pass

        attempt = 0
        delay = 1
        while True:
            broker = self.brokers[attempt % len(self.brokers)]
            attempt += 1

            try:
                self.connection_create(broker)
                self.connection.open()
            except qpid.messaging.exceptions.ConnectionError, e:
                msg_dict = dict(e=e, delay=delay)
                msg = _("Unable to connect to AMQP server: %(e)s. "
                        "Sleeping %(delay)s seconds") % msg_dict
                LOG.error(msg)
                time.sleep(delay)
                delay = min(2 * delay, 60)
            else:
                LOG.info(_('Connected to AMQP server on %s'), broker)
                break
Example #9
0
    def _wait_child(self):
        try:
            # Don't block if no child processes have exited
            pid, status = os.waitpid(0, os.WNOHANG)
            if not pid:
                return None
        except OSError as exc:
            if exc.errno not in (errno.EINTR, errno.ECHILD):
                raise
            return None

        if os.WIFSIGNALED(status):
            sig = os.WTERMSIG(status)
            LOG.info(_('Child %(pid)d killed by signal %(sig)d'),
                     dict(pid=pid, sig=sig))
        else:
            code = os.WEXITSTATUS(status)
            LOG.info(_('Child %(pid)s exited with status %(code)d'),
                     dict(pid=pid, code=code))

        if pid not in self.children:
            LOG.warning(_('pid %d not in child list'), pid)
            return None

        wrap = self.children.pop(pid)
        wrap.children.remove(pid)
        return wrap
Example #10
0
    def wait(self):
        """Loop waiting on children to die and respawning as necessary."""

        LOG.debug(_('Full set of CONF:'))
        CONF.log_opt_values(LOG, std_logging.DEBUG)

        while True:
            self.handle_signal()
            self._respawn_children()
            if self.sigcaught:
                signame = _signo_to_signame(self.sigcaught)
                LOG.info(_('Caught %s, stopping children'), signame)
            if not _is_sighup_and_daemon(self.sigcaught):
                break

            for pid in self.children:
                os.kill(pid, signal.SIGHUP)
            self.running = True
            self.sigcaught = None

        for pid in self.children:
            try:
                os.kill(pid, signal.SIGTERM)
            except OSError as exc:
                if exc.errno != errno.ESRCH:
                    raise

        # Wait for children to die
        if self.children:
            LOG.info(_('Waiting on %d children to exit'), len(self.children))
            while self.children:
                self._wait_child()
Example #11
0
    def __call__(self, message_data):
        """Consumer callback to call a method on a proxy object.

        Parses the message for validity and fires off a thread to call the
        proxy object method.

        Message data should be a dictionary with two keys:
            method: string representing the method to call
            args: dictionary of arg: value

        Example: {'method': 'echo', 'args': {'value': 42}}

        """
        # It is important to clear the context here, because at this point
        # the previous context is stored in local.store.context
        if hasattr(local.store, 'context'):
            del local.store.context
        rpc_common._safe_log(LOG.debug, 'received %s', message_data)
        self.msg_id_cache.check_duplicate_message(message_data)
        ctxt = unpack_context(self.conf, message_data)
        method = message_data.get('method')
        args = message_data.get('args', {})
        version = message_data.get('version')
        namespace = message_data.get('namespace')
        if not method:
            LOG.warn(_('no method for message: %s') % message_data)
            ctxt.reply(_('No method for message: %s') % message_data,
                       connection_pool=self.connection_pool)
            return
        self.pool.spawn_n(self._process_data, ctxt, version, method,
                          namespace, args)
Example #12
0
            def publisher(waiter):
                LOG.info(_("Creating proxy for topic: %s"), topic)

                try:
                    # The topic is received over the network,
                    # don't trust this input.
                    if self.badchars.search(topic) is not None:
                        emsg = _("Topic contained dangerous characters.")
                        LOG.warn(emsg)
                        raise RPCException(emsg)

                    out_sock = ZmqSocket("ipc://%s/zmq_topic_%s" %
                                         (ipc_dir, topic),
                                         sock_type, bind=True)
                except RPCException:
                    waiter.send_exception(*sys.exc_info())
                    return

                self.topic_proxy[topic] = eventlet.queue.LightQueue(
                    CONF.rpc_zmq_topic_backlog)
                self.sockets.append(out_sock)

                # It takes some time for a pub socket to open,
                # before we can have any faith in doing a send() to it.
                if sock_type == zmq.PUB:
                    eventlet.sleep(.5)

                waiter.send(True)

                while(True):
                    data = self.topic_proxy[topic].get()
                    out_sock.send(data, copy=False)
    def reconnect(self):
        """Handles reconnecting and re-establishing sessions and queues"""
        if self.connection.opened():
            try:
                self.connection.close()
            except qpid.messaging.exceptions.ConnectionError:
                pass

        attempt = 0
        delay = 1
        while True:
            broker = self.brokers[attempt % len(self.brokers)]
            attempt += 1

            try:
                self.connection_create(broker)
                self.connection.open()
            except qpid.messaging.exceptions.ConnectionError, e:
                msg_dict = dict(e=e, delay=delay)
                msg = _("Unable to connect to AMQP server: %(e)s. "
                        "Sleeping %(delay)s seconds") % msg_dict
                LOG.error(msg)
                time.sleep(delay)
                delay = min(2 * delay, 60)
            else:
                LOG.info(_('Connected to AMQP server on %s'), broker)
                break
def _multi_send(method, context, topic, msg, timeout=None):
    """
    Wraps the sending of messages,
    dispatches to the matchmaker and sends
    message to all relevant hosts.
    """
    conf = CONF
    LOG.debug(_("%(msg)s") % {'msg': ' '.join(map(pformat, (topic, msg)))})

    queues = matchmaker.queues(topic)
    LOG.debug(_("Sending message(s) to: %s"), queues)

    # Don't stack if we have no matchmaker results
    if len(queues) == 0:
        LOG.warn(_("No matchmaker results. Not casting."))
        # While not strictly a timeout, callers know how to handle
        # this exception and a timeout isn't too big a lie.
        raise rpc_common.Timeout, "No match from matchmaker."

    # This supports brokerless fanout (addresses > 1)
    for queue in queues:
        (_topic, ip_addr) = queue
        _addr = "tcp://%s:%s" % (ip_addr, conf.rpc_zmq_port)

        if method.__name__ == '_cast':
            eventlet.spawn_n(method, _addr, context,
                             _topic, _topic, msg, timeout)
            return
        return method(_addr, context, _topic, _topic, msg, timeout)
Example #15
0
def register_opts(conf):
    """Registration of options for this driver."""
    #NOTE(ewindisch): ZMQ_CTX and matchmaker
    # are initialized here as this is as good
    # an initialization method as any.

    # We memoize through these globals
    global ZMQ_CTX
    global matchmaker
    global CONF

    if not CONF:
        conf.register_opts(zmq_opts)
        CONF = conf
    # Don't re-set, if this method is called twice.
    if not ZMQ_CTX:
        ZMQ_CTX = zmq.Context(conf.rpc_zmq_contexts)
    if not matchmaker:
        # rpc_zmq_matchmaker should be set to a 'module.Class'
        mm_path = conf.rpc_zmq_matchmaker.split('.')
        mm_module = '.'.join(mm_path[:-1])
        mm_class = mm_path[-1]

        # Only initialize a class.
        if mm_path[-1][0] not in string.ascii_uppercase:
            LOG.error(_("Matchmaker could not be loaded.\n"
                      "rpc_zmq_matchmaker is not a class."))
            raise RPCException(_("Error loading Matchmaker."))

        mm_impl = importutils.import_module(mm_module)
        mm_constructor = getattr(mm_impl, mm_class)
        matchmaker = mm_constructor()
Example #16
0
    def register(self, proxy, in_addr, zmq_type_in, out_addr=None,
                 zmq_type_out=None, in_bind=True, out_bind=True,
                 subscribe=None):

        LOG.info(_("Registering reactor"))

        if zmq_type_in not in (zmq.PULL, zmq.SUB):
            raise RPCException("Bad input socktype")

        # Items push in.
        inq = ZmqSocket(in_addr, zmq_type_in, bind=in_bind,
                        subscribe=subscribe)

        self.proxies[inq] = proxy
        self.sockets.append(inq)

        LOG.info(_("In reactor registered"))

        if not out_addr:
            return

        if zmq_type_out not in (zmq.PUSH, zmq.PUB):
            raise RPCException("Bad output socktype")

        # Items push out.
        outq = ZmqSocket(out_addr, zmq_type_out, bind=out_bind)

        self.mapping[inq] = outq
        self.mapping[outq] = inq
        self.sockets.append(outq)

        LOG.info(_("Out reactor registered"))
Example #17
0
    def create_consumer(self, topic, proxy, fanout=False):
        # Only consume on the base topic name.
        topic = topic.split('.', 1)[0]

        LOG.info(_("Create Consumer for topic (%(topic)s)") %
                 {'topic': topic})

        # Subscription scenarios
        if fanout:
            subscribe = ('', fanout)[type(fanout) == str]
            sock_type = zmq.SUB
            topic = 'fanout~' + topic
        else:
            sock_type = zmq.PULL
            subscribe = None

        # Receive messages from (local) proxy
        inaddr = "ipc://%s/zmq_topic_%s" % \
            (CONF.rpc_zmq_ipc_dir, topic)

        LOG.debug(_("Consumer is a zmq.%s"),
                  ['PULL', 'SUB'][sock_type == zmq.SUB])

        self.reactor.register(proxy, inaddr, sock_type,
                              subscribe=subscribe, in_bind=False)
Example #18
0
    def __init__(self, addr, zmq_type, bind=True, subscribe=None):
        self.sock = ZMQ_CTX.socket(zmq_type)
        self.addr = addr
        self.type = zmq_type
        self.subscriptions = []

        # Support failures on sending/receiving on wrong socket type.
        self.can_recv = zmq_type in (zmq.PULL, zmq.SUB)
        self.can_send = zmq_type in (zmq.PUSH, zmq.PUB)
        self.can_sub = zmq_type in (zmq.SUB, )

        # Support list, str, & None for subscribe arg (cast to list)
        do_sub = {
            list: subscribe,
            str: [subscribe],
            type(None): []
        }[type(subscribe)]

        for f in do_sub:
            self.subscribe(f)

        str_data = {'addr': addr, 'type': self.socket_s(),
                    'subscribe': subscribe, 'bind': bind}

        LOG.debug(_("Connecting to %(addr)s with %(type)s"), str_data)
        LOG.debug(_("-> Subscribed to %(subscribe)s"), str_data)
        LOG.debug(_("-> bind: %(bind)s"), str_data)

        try:
            if bind:
                self.sock.bind(addr)
            else:
                self.sock.connect(addr)
        except Exception:
            raise RPCException(_("Could not open socket."))
Example #19
0
 def _error_callback(exc):
     if isinstance(exc, socket.timeout):
         LOG.exception(_("Timed out waiting for RPC response: %s") % str(exc))
         raise rpc_common.Timeout()
     else:
         LOG.exception(_("Failed to consume message from queue: %s") % str(exc))
         info["do_consume"] = True
Example #20
0
    def _process_data(self, ctxt, version, method, namespace, args):
        """Process a message in a new thread.

        If the proxy object we have has a dispatch method
        (see rpc.dispatcher.RpcDispatcher), pass it the version,
        method, and args and let it dispatch as appropriate.  If not, use
        the old behavior of magically calling the specified method on the
        proxy we have here.
        """
        ctxt.update_store()
        try:
            rval = self.proxy.dispatch(ctxt, version, method, namespace,
                                       **args)
            # Check if the result was a generator
            if inspect.isgenerator(rval):
                for x in rval:
                    ctxt.reply(x, None, connection_pool=self.connection_pool)
            else:
                ctxt.reply(rval, None, connection_pool=self.connection_pool)
            # This final None tells multicall that it is done.
            ctxt.reply(ending=True, connection_pool=self.connection_pool)
        except rpc_common.ClientException as e:
            LOG.debug(_('Expected exception during message handling (%s)') %
                      e._exc_info[1])
            ctxt.reply(None, e._exc_info,
                       connection_pool=self.connection_pool,
                       log_failure=False)
        except Exception:
            # sys.exc_info() is deleted by LOG.exception().
            exc_info = sys.exc_info()
            LOG.error(_('Exception during message handling'),
                      exc_info=exc_info)
            ctxt.reply(None, exc_info, connection_pool=self.connection_pool)
Example #21
0
def _parse_check(rule):
    """
    Parse a single base check rule into an appropriate Check object.
    """

    # Handle the special checks
    if rule == '!':
        return FalseCheck()
    elif rule == '@':
        return TrueCheck()

    try:
        kind, match = rule.split(':', 1)
    except Exception:
        LOG.exception(_("Failed to understand rule %(rule)s") % locals())
        # If the rule is invalid, we'll fail closed
        return FalseCheck()

    # Find what implements the check
    if kind in _checks:
        return _checks[kind](kind, match)
    elif None in _checks:
        return _checks[None](kind, match)
    else:
        LOG.error(_("No handler for matches of kind %s") % kind)
        return FalseCheck()
Example #22
0
 def _connect(self, params):
     """Connect to rabbit.  Re-establish any queues that may have
     been declared before if we are reconnecting.  Exceptions should
     be handled by the caller.
     """
     if self.connection:
         LOG.info(_("Reconnecting to AMQP server on " "%(hostname)s:%(port)d") % params)
         try:
             self.connection.close()
         except self.connection_errors:
             pass
         # Setting this in case the next statement fails, though
         # it shouldn't be doing any network operations, yet.
         self.connection = None
     self.connection = kombu.connection.BrokerConnection(**params)
     self.connection_errors = self.connection.connection_errors
     if self.memory_transport:
         # Kludge to speed up tests.
         self.connection.transport.polling_interval = 0.0
     self.consumer_num = itertools.count(1)
     self.connection.connect()
     self.channel = self.connection.channel()
     # work around 'memory' transport bug in 1.1.3
     if self.memory_transport:
         self.channel._new_queue("ae.undeliver")
     for consumer in self.consumers:
         consumer.reconnect(self.channel)
     LOG.info(_("Connected to AMQP server on %(hostname)s:%(port)d") % params)
Example #23
0
    def _wait_for_exit_or_signal(self, ready_callback=None):
        status = None
        signo = 0

        LOG.debug(_('Full set of CONF:'))
        CONF.log_opt_values(LOG, std_logging.DEBUG)

        try:
            if ready_callback:
                ready_callback()
            super(ServiceLauncher, self).wait()
        except SignalExit as exc:
            signame = _signo_to_signame(exc.signo)
            LOG.info(_('Caught %s, exiting'), signame)
            status = exc.code
            signo = exc.signo
        except SystemExit as exc:
            status = exc.code
        finally:
            self.stop()
            if rpc:
                try:
                    rpc.cleanup()
                except Exception:
                    # We're shutting down, so it doesn't matter at this point.
                    LOG.exception(_('Exception during rpc cleanup.'))

        return status, signo
 def _connect(self, params):
     """Connect to rabbit.  Re-establish any queues that may have
     been declared before if we are reconnecting.  Exceptions should
     be handled by the caller.
     """
     if self.connection:
         LOG.info(
             _("Reconnecting to AMQP server on "
               "%(hostname)s:%(port)d") % params)
         try:
             self.connection.close()
         except self.connection_errors:
             pass
         # Setting this in case the next statement fails, though
         # it shouldn't be doing any network operations, yet.
         self.connection = None
     self.connection = kombu.connection.BrokerConnection(**params)
     self.connection_errors = self.connection.connection_errors
     if self.memory_transport:
         # Kludge to speed up tests.
         self.connection.transport.polling_interval = 0.0
     self.consumer_num = itertools.count(1)
     self.connection.connect()
     self.channel = self.connection.channel()
     # work around 'memory' transport bug in 1.1.3
     if self.memory_transport:
         self.channel._new_queue('ae.undeliver')
     for consumer in self.consumers:
         consumer.reconnect(self.channel)
     LOG.info(
         _('Connected to AMQP server on %(hostname)s:%(port)d') % params)
Example #25
0
    def __call__(self, message_data):
        """Consumer callback to call a method on a proxy object.

        Parses the message for validity and fires off a thread to call the
        proxy object method.

        Message data should be a dictionary with two keys:
            method: string representing the method to call
            args: dictionary of arg: value

        Example: {'method': 'echo', 'args': {'value': 42}}

        """
        # It is important to clear the context here, because at this point
        # the previous context is stored in local.store.context
        if hasattr(local.store, 'context'):
            del local.store.context
        rpc_common._safe_log(LOG.debug, 'received %s', message_data)
        self.msg_id_cache.check_duplicate_message(message_data)
        ctxt = unpack_context(self.conf, message_data)
        method = message_data.get('method')
        args = message_data.get('args', {})
        version = message_data.get('version')
        namespace = message_data.get('namespace')
        if not method:
            LOG.warn(_('no method for message: %s') % message_data)
            ctxt.reply(_('No method for message: %s') % message_data,
                       connection_pool=self.connection_pool)
            return
        self.pool.spawn_n(self._process_data, ctxt, version, method, namespace,
                          args)
 def _error_callback(exc):
     if isinstance(exc, qpid.messaging.exceptions.Empty):
         LOG.exception(
             _('Timed out waiting for RPC response: %s') % str(exc))
         raise rpc_common.Timeout()
     else:
         LOG.exception(
             _('Failed to consume message from queue: %s') % str(exc))
Example #27
0
 def _error_callback(exc):
     if isinstance(exc, qpid_exceptions.Empty):
         LOG.debug(_('Timed out waiting for RPC response: %s') %
                   str(exc))
         raise rpc_common.Timeout()
     else:
         LOG.exception(_('Failed to consume message from queue: %s') %
                       str(exc))
 def _error_callback(exc):
     if isinstance(exc, socket.timeout):
         LOG.exception(
             _('Timed out waiting for RPC response: %s') % str(exc))
         raise rpc_common.Timeout()
     else:
         LOG.exception(
             _('Failed to consume message from queue: %s') % str(exc))
         info['do_consume'] = True
    def reconnect(self):
        """Handles reconnecting and re-establishing queues.
        Will retry up to self.max_retries number of times.
        self.max_retries = 0 means to retry forever.
        Sleep between tries, starting at self.interval_start
        seconds, backing off self.interval_stepping number of seconds
        each attempt.
        """

        attempt = 0
        while True:
            params = self.params_list[attempt % len(self.params_list)]
            attempt += 1
            try:
                self._connect(params)
                return
            except (IOError, self.connection_errors) as e:
                pass
            except Exception, e:
                # NOTE(comstud): Unfortunately it's possible for amqplib
                # to return an error not covered by its transport
                # connection_errors in the case of a timeout waiting for
                # a protocol response.  (See paste link in LP888621)
                # So, we check all exceptions for 'timeout' in them
                # and try to reconnect in this case.
                if 'timeout' not in str(e):
                    raise

            log_info = {}
            log_info['err_str'] = str(e)
            log_info['max_retries'] = self.max_retries
            log_info.update(params)

            if self.max_retries and attempt == self.max_retries:
                LOG.error(
                    _('Unable to connect to AMQP server on '
                      '%(hostname)s:%(port)d after %(max_retries)d '
                      'tries: %(err_str)s') % log_info)
                # NOTE(comstud): Copied from original code.  There's
                # really no better recourse because if this was a queue we
                # need to consume on, we have no way to consume anymore.
                sys.exit(1)

            if attempt == 1:
                sleep_time = self.interval_start or 1
            elif attempt > 1:
                sleep_time += self.interval_stepping
            if self.interval_max:
                sleep_time = min(sleep_time, self.interval_max)

            log_info['sleep_time'] = sleep_time
            LOG.error(
                _('AMQP server on %(hostname)s:%(port)d is '
                  'unreachable: %(err_str)s. Trying again in '
                  '%(sleep_time)d seconds.') % log_info)
            time.sleep(sleep_time)
Example #30
0
 def _process_data(self, message_data):
     msg_id = message_data.pop('_msg_id', None)
     waiter = self._call_waiters.get(msg_id)
     if not waiter:
         LOG.warn(_('No calling threads waiting for msg_id : %(msg_id)s'
                    ', message : %(data)s'), {'msg_id': msg_id,
                                              'data': message_data})
         LOG.warn(_('_call_waiters: %s') % self._call_waiters)
     else:
         waiter.put(message_data)
Example #31
0
def notify(context, publisher_id, event_type, priority, payload):
    """Sends a notification using the specified driver

    :param publisher_id: the source worker_type.host of the message
    :param event_type:   the literal type of event (ex. Instance Creation)
    :param priority:     patterned after the enumeration of Python logging
                         levels in the set (DEBUG, WARN, INFO, ERROR, CRITICAL)
    :param payload:       A python dictionary of attributes

    Outgoing message format includes the above parameters, and appends the
    following:

    message_id
      a UUID representing the id for this notification

    timestamp
      the GMT timestamp the notification was sent at

    The composite message will be constructed as a dictionary of the above
    attributes, which will then be sent via the transport mechanism defined
    by the driver.

    Message example::

        {'message_id': str(uuid.uuid4()),
         'publisher_id': 'compute.host1',
         'timestamp': timeutils.utcnow(),
         'priority': 'WARN',
         'event_type': 'compute.create_instance',
         'payload': {'instance_id': 12, ... }}

    """
    if priority not in log_levels:
        raise BadPriorityException(
            _('%s not in valid priorities') % priority)

    # Ensure everything is JSON serializable.
    payload = jsonutils.to_primitive(payload, convert_instances=True)

    msg = dict(message_id=str(uuid.uuid4()),
               publisher_id=publisher_id,
               event_type=event_type,
               priority=priority,
               payload=payload,
               timestamp=str(timeutils.utcnow()))

    for driver in _get_drivers():
        try:
            driver.notify(context, msg)
        except Exception as e:
            LOG.exception(_("Problem '%(e)s' attempting to "
                            "send to notification system. "
                            "Payload=%(payload)s")
                          % dict(e=e, payload=payload))
Example #32
0
 def _process_data(self, message_data):
     msg_id = message_data.pop('_msg_id', None)
     waiter = self._call_waiters.get(msg_id)
     if not waiter:
         LOG.warn(
             _('No calling threads waiting for msg_id : %(msg_id)s'
               ', message : %(data)s'), {
                   'msg_id': msg_id,
                   'data': message_data
               })
         LOG.warn(_('_call_waiters: %s') % self._call_waiters)
     else:
         waiter.put(message_data)
Example #33
0
    def __init__(self, info=None, topic=None, method=None):
        """Initiates Timeout object.

        :param info: Extra info to convey to the user
        :param topic: The topic that the rpc call was sent to
        :param rpc_method_name: The name of the rpc method being
                                called
        """
        self.info = info
        self.topic = topic
        self.method = method
        super(Timeout, self).__init__(None,
                                      info=info or _('<unknown>'),
                                      topic=topic or _('<unknown>'),
                                      method=method or _('<unknown>'))
Example #34
0
    def __init__(self, info=None, topic=None, method=None):
        """Initiates Timeout object.

        :param info: Extra info to convey to the user
        :param topic: The topic that the rpc call was sent to
        :param rpc_method_name: The name of the rpc method being
                                called
        """
        self.info = info
        self.topic = topic
        self.method = method
        super(Timeout, self).__init__(
            None,
            info=info or _('<unknown>'),
            topic=topic or _('<unknown>'),
            method=method or _('<unknown>'))
Example #35
0
    def deprecated(self, msg, *args, **kwargs):
        """Call this method when a deprecated feature is used.

        If the system is configured for fatal deprecations then the message
        is logged at the 'critical' level and :class:`DeprecatedConfig` will
        be raised.

        Otherwise, the message will be logged (once) at the 'warn' level.

        :raises: :class:`DeprecatedConfig` if the system is configured for
                 fatal deprecations.

        """
        stdmsg = _("Deprecated: %s") % msg
        if CONF.fatal_deprecations:
            self.critical(stdmsg, *args, **kwargs)
            raise DeprecatedConfig(msg=stdmsg)

        # Using a list because a tuple with dict can't be stored in a set.
        sent_args = self._deprecated_messages_sent.setdefault(msg, list())

        if args in sent_args:
            # Already logged this message, so don't log it again.
            return

        sent_args.append(args)
        self.warn(stdmsg, *args, **kwargs)
Example #36
0
def fanout_cast(conf, context, topic, msg, connection_pool):
    """Sends a message on a fanout exchange without waiting for a response."""
    LOG.debug(_('Making asynchronous fanout cast...'))
    _add_unique_id(msg)
    pack_context(msg, context)
    with ConnectionContext(conf, connection_pool) as conn:
        conn.fanout_send(topic, rpc_common.serialize_msg(msg))
Example #37
0
 def __exit__(self, exc_type, exc_val, exc_tb):
     try:
         self.unlock()
         self.lockfile.close()
     except IOError:
         LOG.exception(_("Could not release the acquired lock `%s`"),
                       self.fname)
Example #38
0
 def _callback(raw_message):
     message = self.channel.message_to_python(raw_message)
     try:
         callback(message.payload)
         message.ack()
     except Exception:
         LOG.exception(_("Failed to process message... skipping it."))
Example #39
0
    def _process_data(self, ctxt, version, method, args):
        """Process a message in a new thread.

        If the proxy object we have has a dispatch method
        (see rpc.dispatcher.RpcDispatcher), pass it the version,
        method, and args and let it dispatch as appropriate.  If not, use
        the old behavior of magically calling the specified method on the
        proxy we have here.
        """
        ctxt.update_store()
        try:
            rval = self.proxy.dispatch(ctxt, version, method, **args)
            # Check if the result was a generator
            if inspect.isgenerator(rval):
                for x in rval:
                    ctxt.reply(x, None, connection_pool=self.connection_pool)
            else:
                ctxt.reply(rval, None, connection_pool=self.connection_pool)
            # This final None tells multicall that it is done.
            ctxt.reply(ending=True, connection_pool=self.connection_pool)
        except Exception:
            LOG.exception(_('Exception during message handling'))
            ctxt.reply(None,
                       sys.exc_info(),
                       connection_pool=self.connection_pool)
Example #40
0
def notify(conf, context, topic, msg, connection_pool):
    """Sends a notification event on a topic."""
    LOG.debug(_('Sending %(event_type)s on %(topic)s'),
              dict(event_type=msg.get('event_type'), topic=topic))
    pack_context(msg, context)
    with ConnectionContext(conf, connection_pool) as conn:
        conn.notify_send(topic, msg)
Example #41
0
 def deprecated(self, msg, *args, **kwargs):
     stdmsg = _("Deprecated: %s") % msg
     if CONF.fatal_deprecations:
         self.critical(stdmsg, *args, **kwargs)
         raise DeprecatedConfig(msg=stdmsg)
     else:
         self.warn(stdmsg, *args, **kwargs)
Example #42
0
def bool_from_string(subject, strict=False, default=False):
    """Interpret a string as a boolean.

    A case-insensitive match is performed such that strings matching 't',
    'true', 'on', 'y', 'yes', or '1' are considered True and, when
    `strict=False`, anything else returns the value specified by 'default'.

    Useful for JSON-decoded stuff and config file parsing.

    If `strict=True`, unrecognized values, including None, will raise a
    ValueError which is useful when parsing values passed in from an API call.
    Strings yielding False are 'f', 'false', 'off', 'n', 'no', or '0'.
    """
    if not isinstance(subject, six.string_types):
        subject = six.text_type(subject)

    lowered = subject.strip().lower()

    if lowered in TRUE_STRINGS:
        return True
    elif lowered in FALSE_STRINGS:
        return False
    elif strict:
        acceptable = ', '.join("'%s'" % s
                               for s in sorted(TRUE_STRINGS + FALSE_STRINGS))
        msg = _("Unrecognized value '%(val)s', acceptable values are:"
                " %(acceptable)s") % {
                    'val': subject,
                    'acceptable': acceptable
                }
        raise ValueError(msg)
    else:
        return default
Example #43
0
 def deprecated(self, msg, *args, **kwargs):
     stdmsg = _("Deprecated: %s") % msg
     if CONF.fatal_deprecations:
         self.critical(stdmsg, *args, **kwargs)
         raise DeprecatedConfig(msg=stdmsg)
     else:
         self.warn(stdmsg, *args, **kwargs)
def initialize_if_enabled():
    backdoor_locals = {
        'exit': _dont_use_this,      # So we don't exit the entire process
        'quit': _dont_use_this,      # So we don't exit the entire process
        'fo': _find_objects,
        'pgt': _print_greenthreads,
        'pnt': _print_nativethreads,
    }

    if CONF.backdoor_port is None:
        return None

    start_port, end_port = _parse_port_range(str(CONF.backdoor_port))

    # NOTE(johannes): The standard sys.displayhook will print the value of
    # the last expression and set it to __builtin__._, which overwrites
    # the __builtin__._ that gettext sets. Let's switch to using pprint
    # since it won't interact poorly with gettext, and it's easier to
    # read the output too.
    def displayhook(val):
        if val is not None:
            pprint.pprint(val)
    sys.displayhook = displayhook

    sock = _listen('localhost', start_port, end_port, eventlet.listen)

    # In the case of backdoor port being zero, a port number is assigned by
    # listen().  In any case, pull the port number out here.
    port = sock.getsockname()[1]
    LOG.info(_('Eventlet backdoor listening on %(port)s for process %(pid)d') %
             {'port': port, 'pid': os.getpid()})
    eventlet.spawn_n(eventlet.backdoor.backdoor_server, sock,
                     locals=backdoor_locals)
    return port
 def _callback(raw_message):
     message = self.channel.message_to_python(raw_message)
     try:
         callback(message.payload)
         message.ack()
     except Exception:
         LOG.exception(_("Failed to process message... skipping it."))
Example #46
0
def notify(context, message):
    """Deprecated in Grizzly. Please use rpc_notifier instead."""

    LOG.deprecated(
        _("The rabbit_notifier is now deprecated."
          " Please use rpc_notifier instead."))
    rpc_notifier.notify(context, message)
Example #47
0
class Timeout(RPCException):
    """Signifies that a timeout has occurred.

    This exception is raised if the rpc_response_timeout is reached while
    waiting for a response from the remote side.
    """
    message = _("Timeout while waiting on RPC response.")
Example #48
0
            def publisher(waiter):
                LOG.info(_LI("Creating proxy for topic: %s"), topic)

                try:
                    # The topic is received over the network,
                    # don't trust this input.
                    if self.badchars.search(topic) is not None:
                        emsg = _("Topic contained dangerous characters.")
                        LOG.warn(emsg)
                        raise RPCException(emsg)

                    out_sock = ZmqSocket("ipc://%s/zmq_topic_%s" %
                                         (ipc_dir, topic),
                                         sock_type, bind=True)
                except RPCException:
                    waiter.send_exception(*sys.exc_info())
                    return

                self.topic_proxy[topic] = eventlet.queue.LightQueue(
                    CONF.rpc_zmq_topic_backlog)
                self.sockets.append(out_sock)

                # It takes some time for a pub socket to open,
                # before we can have any faith in doing a send() to it.
                if sock_type == zmq.PUB:
                    eventlet.sleep(.5)

                waiter.send(True)

                while(True):
                    data = self.topic_proxy[topic].get()
                    out_sock.send(data, copy=False)
Example #49
0
    def deprecated(self, msg, *args, **kwargs):
        """Call this method when a deprecated feature is used.

        If the system is configured for fatal deprecations then the message
        is logged at the 'critical' level and :class:`DeprecatedConfig` will
        be raised.

        Otherwise, the message will be logged (once) at the 'warn' level.

        :raises: :class:`DeprecatedConfig` if the system is configured for
                 fatal deprecations.

        """
        stdmsg = _("Deprecated: %s") % msg
        if CONF.fatal_deprecations:
            self.critical(stdmsg, *args, **kwargs)
            raise DeprecatedConfig(msg=stdmsg)

        # Using a list because a tuple with dict can't be stored in a set.
        sent_args = self._deprecated_messages_sent.setdefault(msg, list())

        if args in sent_args:
            # Already logged this message, so don't log it again.
            return

        sent_args.append(args)
        self.warn(stdmsg, *args, **kwargs)
Example #50
0
def serialize_remote_exception(failure_info):
    """Prepares exception data to be sent over rpc.

    Failure_info should be a sys.exc_info() tuple.

    """
    tb = traceback.format_exception(*failure_info)
    failure = failure_info[1]
    LOG.error(_("Returning exception %s to caller"), unicode(failure))
    LOG.error(tb)

    kwargs = {}
    if hasattr(failure, 'kwargs'):
        kwargs = failure.kwargs

    data = {
        'class': str(failure.__class__.__name__),
        'module': str(failure.__class__.__module__),
        'message': unicode(failure),
        'tb': tb,
        'args': failure.args,
        'kwargs': kwargs
    }

    json_data = jsonutils.dumps(data)

    return json_data
Example #51
0
class Timeout(RPCException):
    """Signifies that a timeout has occurred.

    This exception is raised if the rpc_response_timeout is reached while
    waiting for a response from the remote side.
    """
    msg_fmt = _('Timeout while waiting on RPC response - '
                'topic: "%(topic)s", RPC method: "%(method)s" '
                'info: "%(info)s"')

    def __init__(self, info=None, topic=None, method=None):
        """Initiates Timeout object.

        :param info: Extra info to convey to the user
        :param topic: The topic that the rpc call was sent to
        :param rpc_method_name: The name of the rpc method being
                                called
        """
        self.info = info
        self.topic = topic
        self.method = method
        super(Timeout, self).__init__(None,
                                      info=info or _('<unknown>'),
                                      topic=topic or _('<unknown>'),
                                      method=method or _('<unknown>'))
Example #52
0
def serialize_remote_exception(failure_info):
    """Prepares exception data to be sent over rpc.

    Failure_info should be a sys.exc_info() tuple.

    """
    tb = traceback.format_exception(*failure_info)
    failure = failure_info[1]
    LOG.error(_("Returning exception %s to caller"), unicode(failure))
    LOG.error(tb)

    kwargs = {}
    if hasattr(failure, 'kwargs'):
        kwargs = failure.kwargs

    data = {
        'class': str(failure.__class__.__name__),
        'module': str(failure.__class__.__module__),
        'message': unicode(failure),
        'tb': tb,
        'args': failure.args,
        'kwargs': kwargs
    }

    json_data = jsonutils.dumps(data)

    return json_data
Example #53
0
def multicall(conf, context, topic, msg, timeout, connection_pool):
    """Make a call that returns multiple times."""
    # Can't use 'with' for multicall, as it returns an iterator
    # that will continue to use the connection.  When it's done,
    # connection.close() will get called which will put it back into
    # the pool
    LOG.debug(_('Making asynchronous call on %s ...'), topic)
    msg_id = uuid.uuid4().hex
    msg.update({'_msg_id': msg_id})
    LOG.debug(_('MSG_ID is %s') % (msg_id))
    pack_context(msg, context)

    conn = ConnectionContext(conf, connection_pool)
    wait_msg = MulticallWaiter(conf, conn, timeout)
    conn.declare_direct_consumer(msg_id, wait_msg)
    conn.topic_send(topic, msg)
    return wait_msg
 def consume(self):
     """Fetch the message and pass it to the callback object"""
     message = self.receiver.fetch()
     try:
         self.callback(message.content)
     except Exception:
         LOG.exception(_("Failed to process message... skipping it."))
     finally:
         self.session.acknowledge(message)
 def run(self, key):
     if not self._ring_has(key):
         LOG.warn(
             _("No key defining hosts for topic '%s', "
               "see ringfile") % (key, )
         )
         return []
     host = next(self.ring0[key])
     return [(key + '.' + host, host)]
Example #56
0
 def add_call_waiter(self, waiter, msg_id):
     self._num_call_waiters += 1
     if self._num_call_waiters > self._num_call_waiters_wrn_threshold:
         LOG.warn(
             _('Number of call waiters is greater than warning '
               'threshold: %d. There could be a MulticallProxyWaiter '
               'leak.') % self._num_call_waiters_wrn_threshold)
         self._num_call_waiters_wrn_threshold *= 2
     self._call_waiters[msg_id] = waiter