def getCraftedGcode(self, fileName, repository, svgText):
"Parse svgText and store the scale svgText."
svgReader = SVGReader()
svgReader.parseSVG('', svgText)
if svgReader.sliceDictionary == None:
print('Warning, nothing will be done because the sliceDictionary could not be found getCraftedGcode in preface.')
return ''
xyPlaneScale = repository.xyPlaneScale.value
zAxisScale = repository.zAxisScale.value
decimalPlacesCarried = int(svgReader.sliceDictionary['decimalPlacesCarried'])
layerHeight = zAxisScale * float(svgReader.sliceDictionary['layerHeight'])
edgeWidth = float(svgReader.sliceDictionary['edgeWidth'])
loopLayers = svgReader.loopLayers
for loopLayer in loopLayers:
setLoopLayerScale(loopLayer, xyPlaneScale, zAxisScale)
cornerMaximum = Vector3(-912345678.0, -912345678.0, -912345678.0)
cornerMinimum = Vector3(912345678.0, 912345678.0, 912345678.0)
svg_writer.setSVGCarvingCorners(cornerMaximum, cornerMinimum, layerHeight, loopLayers)
svgWriter = svg_writer.SVGWriter(
True,
cornerMaximum,
cornerMinimum,
decimalPlacesCarried,
layerHeight,
edgeWidth)
commentElement = svg_writer.getCommentElement(svgReader.documentElement)
procedureNameString = svgReader.sliceDictionary['procedureName'] + ',scale'
return svgWriter.getReplacedSVGTemplate(fileName, loopLayers, procedureNameString, commentElement)
def getCraftedGcode(self, fileName, repository, svgText):
"Parse svgText and store the bottom svgText."
svgReader = SVGReader()
svgReader.parseSVG("", svgText)
if svgReader.sliceDictionary == None:
print(
"Warning, nothing will be done because the sliceDictionary could not be found getCraftedGcode in preface."
)
return ""
decimalPlacesCarried = int(svgReader.sliceDictionary["decimalPlacesCarried"])
edgeWidth = float(svgReader.sliceDictionary["edgeWidth"])
layerHeight = float(svgReader.sliceDictionary["layerHeight"])
loopLayers = svgReader.loopLayers
zMinimum = 987654321.0
for loopLayer in loopLayers:
zMinimum = min(loopLayer.z, zMinimum)
deltaZ = (
repository.altitude.value + repository.additionalHeightOverLayerThickness.value * layerHeight - zMinimum
)
for loopLayer in loopLayers:
loopLayer.z += deltaZ
cornerMaximum = Vector3(-912345678.0, -912345678.0, -912345678.0)
cornerMinimum = Vector3(912345678.0, 912345678.0, 912345678.0)
svg_writer.setSVGCarvingCorners(cornerMaximum, cornerMinimum, layerHeight, loopLayers)
svgWriter = svg_writer.SVGWriter(
True, cornerMaximum, cornerMinimum, decimalPlacesCarried, layerHeight, edgeWidth
)
commentElement = svg_writer.getCommentElement(svgReader.documentElement)
procedureNameString = svgReader.sliceDictionary["procedureName"] + ",bottom"
return svgWriter.getReplacedSVGTemplate(fileName, loopLayers, procedureNameString, commentElement)
def getCraftedGcode(self, fileName, repository, svgText):
"Parse svgText and store the bottom svgText."
svgReader = SVGReader()
svgReader.parseSVG('', svgText)
if svgReader.sliceDictionary == None:
print(
'Warning, nothing will be done because the sliceDictionary could not be found getCraftedGcode in preface.'
)
return ''
decimalPlacesCarried = int(
svgReader.sliceDictionary['decimalPlacesCarried'])
layerThickness = float(svgReader.sliceDictionary['layerThickness'])
perimeterWidth = float(svgReader.sliceDictionary['perimeterWidth'])
loopLayers = svgReader.loopLayers
zMinimum = 987654321.0
for loopLayer in loopLayers:
zMinimum = min(loopLayer.z, zMinimum)
deltaZ = repository.altitude.value + repository.additionalHeightOverLayerThickness.value * layerThickness - zMinimum
for loopLayer in loopLayers:
loopLayer.z += deltaZ
cornerMaximum = Vector3(-912345678.0, -912345678.0, -912345678.0)
cornerMinimum = Vector3(912345678.0, 912345678.0, 912345678.0)
svg_writer.setSVGCarvingCorners(cornerMaximum, cornerMinimum,
layerThickness, loopLayers)
svgWriter = svg_writer.SVGWriter(True, cornerMaximum, cornerMinimum,
decimalPlacesCarried, layerThickness,
perimeterWidth)
commentElement = svg_writer.getCommentElement(
svgReader.documentElement)
procedureNameString = svgReader.sliceDictionary[
'procedureName'] + ',bottom'
return svgWriter.getReplacedSVGTemplate(fileName, loopLayers,
procedureNameString,
commentElement)
def __init__(self):
self.distanceFeedRate = gcodec.DistanceFeedRate()
self.extruderActive = False
self.lineIndex = 0
self.oldLocation = None
self.svgReader = SVGReader()
self.doingLayerN = 0
def getCraftedGcode(self, fileName, repository, svgText):
"Parse svgText and store the scale svgText."
svgReader = SVGReader()
svgReader.parseSVG('', svgText)
if svgReader.sliceDictionary == None:
print('Warning, nothing will be done because the sliceDictionary could not be found getCraftedGcode in preface.')
return ''
xyPlaneScale = repository.xyPlaneScale.value
zAxisScale = repository.zAxisScale.value
decimalPlacesCarried = int(svgReader.sliceDictionary['decimalPlacesCarried'])
layerHeight = zAxisScale * float(svgReader.sliceDictionary['layerHeight'])
edgeWidth = float(svgReader.sliceDictionary['edgeWidth'])
loopLayers = svgReader.loopLayers
for loopLayer in loopLayers:
setLoopLayerScale(loopLayer, xyPlaneScale, zAxisScale)
cornerMaximum = Vector3(-912345678.0, -912345678.0, -912345678.0)
cornerMinimum = Vector3(912345678.0, 912345678.0, 912345678.0)
svg_writer.setSVGCarvingCorners(cornerMaximum, cornerMinimum, layerHeight, loopLayers)
svgWriter = svg_writer.SVGWriter(
True,
cornerMaximum,
cornerMinimum,
decimalPlacesCarried,
layerHeight,
edgeWidth)
commentElement = svg_writer.getCommentElement(svgReader.documentElement)
procedureNameString = svgReader.sliceDictionary['procedureName'] + ',scale'
return svgWriter.getReplacedSVGTemplate(fileName, loopLayers, procedureNameString, commentElement)
def getCraftedGcode(self, fileName, repository, svgText):
"Parse svgText and store the bottom svgText."
svgReader = SVGReader()
svgReader.parseSVG('', svgText)
if svgReader.sliceDictionary == None:
print('Warning, nothing will be done because the sliceDictionary could not be found getCraftedGcode in preface.')
return ''
decimalPlacesCarried = int(svgReader.sliceDictionary['decimalPlacesCarried'])
layerThickness = float(svgReader.sliceDictionary['layerThickness'])
perimeterWidth = float(svgReader.sliceDictionary['perimeterWidth'])
rotatedLoopLayers = svgReader.rotatedLoopLayers
zMinimum = 987654321.0
for rotatedLoopLayer in rotatedLoopLayers:
zMinimum = min(rotatedLoopLayer.z, zMinimum)
deltaZ = repository.altitude.value + repository.additionalHeightOverLayerThickness.value * layerThickness - zMinimum
for rotatedLoopLayer in rotatedLoopLayers:
rotatedLoopLayer.z += deltaZ
cornerMaximum = Vector3(-912345678.0, -912345678.0, -912345678.0)
cornerMinimum = Vector3(912345678.0, 912345678.0, 912345678.0)
svg_writer.setSVGCarvingCorners(cornerMaximum, cornerMinimum, layerThickness, rotatedLoopLayers)
svgWriter = svg_writer.SVGWriter(
True,
cornerMaximum,
cornerMinimum,
decimalPlacesCarried,
layerThickness,
perimeterWidth)
commentElement = svg_writer.getCommentElement(svgReader.root)
procedureNameString = svgReader.sliceDictionary['procedureName'] + ',bottom'
return svgWriter.getReplacedSVGTemplate(fileName, procedureNameString, rotatedLoopLayers, commentElement)
def __init__(self): self.distanceFeedRate = gcodec.DistanceFeedRate() self.extruderActive = False self.lineIndex = 0 self.oldLocation = None self.svgReader = SVGReader() self.doingLayerN = 0
def __init__(self): 'Add empty lists.' self.layerThickness = 1.0 self.maximumZ = - 999999999.0 self.minimumZ = 999999999.0 self.svgReader = SVGReader()
class SVGCarving: 'An svg carving.' def __init__(self): 'Add empty lists.' self.layerThickness = 1.0 self.maximumZ = - 999999999.0 self.minimumZ = 999999999.0 self.svgReader = SVGReader() def __repr__(self): 'Get the string representation of this carving.' return self.getCarvedSVG() def addXML(self, depth, output): 'Add xml for this object.' xml_simple_writer.addXMLFromObjects(depth, self.svgReader.rotatedLoopLayers, output) def getCarveCornerMaximum(self): 'Get the corner maximum of the vertexes.' return self.cornerMaximum def getCarveCornerMinimum(self): 'Get the corner minimum of the vertexes.' return self.cornerMinimum def getCarvedSVG(self): 'Get the carved svg text.' return svg_writer.getSVGByLoopLayers(True, self.svgReader.rotatedLoopLayers, self) def getCarveLayerThickness(self): 'Get the layer thickness.' return self.layerThickness def getCarveRotatedBoundaryLayers(self): 'Get the rotated boundary layers.' return self.svgReader.rotatedLoopLayers def getFabmetheusXML(self): 'Return the fabmetheus XML.' return None def getInterpretationSuffix(self): 'Return the suffix for a carving.' return 'svg' def parseSVG(self, fileName, svgText): 'Parse SVG text and store the layers.' if svgText == '': return self.fileName = fileName self.svgReader.parseSVG(fileName, svgText) self.layerThickness = euclidean.getFloatDefaultByDictionary( self.layerThickness, self.svgReader.sliceDictionary, 'layerThickness') self.cornerMaximum = Vector3(-999999999.0, -999999999.0, self.maximumZ) self.cornerMinimum = Vector3(999999999.0, 999999999.0, self.minimumZ) svg_writer.setSVGCarvingCorners( self.cornerMaximum, self.cornerMinimum, self.layerThickness, self.svgReader.rotatedLoopLayers) def setCarveInfillInDirectionOfBridge(self, infillInDirectionOfBridge): 'Set the infill in direction of bridge.' pass def setCarveLayerThickness(self, layerThickness): 'Set the layer thickness.' self.layerThickness = layerThickness def setCarveImportRadius(self, importRadius): 'Set the import radius.' pass def setCarveIsCorrectMesh(self, isCorrectMesh): 'Set the is correct mesh flag.' pass
class PrefaceSkein:
"A class to preface a skein of extrusions."
def __init__(self):
self.distanceFeedRate = gcodec.DistanceFeedRate()
self.extruderActive = False
self.lineIndex = 0
self.oldLocation = None
self.svgReader = SVGReader()
def addFromUpperLowerFile(self, fileName):
"Add lines of text from the fileName or the lowercase fileName, if there is no file by the original fileName in the directory."
self.distanceFeedRate.addLinesSetAbsoluteDistanceMode(settings.getLinesInAlterationsOrGivenDirectory(fileName))
def addInitializationToOutput(self):
"Add initialization gcode to the output."
self.addFromUpperLowerFile(self.repository.nameOfStartFile.value) # Add a start file if it exists.
self.distanceFeedRate.addTagBracketedLine('creation', 'skeinforge') # GCode formatted comment
# absoluteFilePathUntilDot = os.path.abspath(__file__)[: os.path.abspath(__file__).rfind('.')]
# if absoluteFilePathUntilDot == '/home/enrique/Desktop/backup/babbleold/script/reprap/fabmetheus/skeinforge_application/skeinforge_plugins/craft_plugins/preface': #is this script on Enrique's computer?
# archive.writeFileText(archive.getVersionFileName(), date.today().isoformat().replace('-', '.')[2 :])
versionText = archive.getFileText(archive.getVersionFileName())
self.distanceFeedRate.addTagBracketedLine('version', versionText) # GCode formatted comment
self.distanceFeedRate.addLine('(<extruderInitialization>)') # GCode formatted comment
if self.repository.setPositioningToAbsolute.value:
self.distanceFeedRate.addLine('G90 ;set positioning to absolute') # Set positioning to absolute.
if self.repository.setUnitsToMillimeters.value:
self.distanceFeedRate.addLine('G21 ;set units to millimeters') # Set units to millimeters.
if self.repository.startAtHome.value:
self.distanceFeedRate.addLine('G28 ;start at home') # Start at home.
if self.repository.resetExtruder.value:
self.distanceFeedRate.addLine('G92 E0 ;reset extruder distance') # Start at home.
# if self.repository.turnExtruderOffAtStartUp.value:
# self.distanceFeedRate.addLine('M103') # Turn extruder off.
craftTypeName = skeinforge_profile.getCraftTypeName()
self.distanceFeedRate.addTagBracketedLine('craftTypeName', craftTypeName)
self.distanceFeedRate.addTagBracketedLine('decimalPlacesCarried', self.distanceFeedRate.decimalPlacesCarried)
layerThickness = float(self.svgReader.sliceDictionary['layerThickness'])
self.distanceFeedRate.addTagRoundedLine('layerThickness', layerThickness)
if self.repository.meta.value:
self.distanceFeedRate.addTagBracketedLine('meta', self.repository.meta.value)
if self.repository.extraLineOne.value:
self.distanceFeedRate.addLine( self.repository.extraLineOne.value)
if self.repository.extraLineTwo.value:
self.distanceFeedRate.addLine( self.repository.extraLineTwo.value)
if self.repository.extraLineThree.value:
self.distanceFeedRate.addLine( self.repository.extraLineThree.value)
if self.repository.extraLineFour.value:
self.distanceFeedRate.addLine( self.repository.extraLineFour.value)
if self.repository.extraLineFive.value:
self.distanceFeedRate.addLine( self.repository.extraLineFive.value)
perimeterWidth = float(self.svgReader.sliceDictionary['perimeterWidth'])
self.distanceFeedRate.addTagRoundedLine('perimeterWidth', perimeterWidth)
self.distanceFeedRate.addTagBracketedLine('profileName', skeinforge_profile.getProfileName(craftTypeName))
self.distanceFeedRate.addLine('(<settings>)')
pluginFileNames = skeinforge_craft.getPluginFileNames()
for pluginFileName in pluginFileNames:
self.addToolSettingLines(pluginFileName)
self.distanceFeedRate.addLine('(</settings>)')
self.distanceFeedRate.addTagBracketedLine('timeStampPreface', strftime('%Y%m%d_%H%M%S'))
procedureNames = self.svgReader.sliceDictionary['procedureName'].replace(',', ' ').split()
for procedureName in procedureNames:
self.distanceFeedRate.addTagBracketedLine('procedureName', procedureName)
self.distanceFeedRate.addTagBracketedLine('procedureName', 'preface')
self.distanceFeedRate.addLine('(</extruderInitialization>)') # Initialization is finished, extrusion is starting.
self.distanceFeedRate.addLine('(<crafting>)') # Initialization is finished, crafting is starting.
def addPreface( self, rotatedLoopLayer ):
"Add preface to the carve layer."
self.distanceFeedRate.addLine('(<layer> %s )' % rotatedLoopLayer.z ) # Indicate that a new layer is starting.
if rotatedLoopLayer.rotation != None:
self.distanceFeedRate.addTagBracketedLine('bridgeRotation', str( rotatedLoopLayer.rotation ) ) # Indicate the bridge rotation.
for loop in rotatedLoopLayer.loops:
self.distanceFeedRate.addGcodeFromLoop(loop, rotatedLoopLayer.z)
self.distanceFeedRate.addLine('(</layer>)')
def addShutdownToOutput(self):
"Add shutdown gcode to the output."
self.distanceFeedRate.addLine('(</crafting>)') # GCode formatted comment
# if self.repository.turnExtruderOffAtShutDown.value:
# self.distanceFeedRate.addLine('M103') # Turn extruder motor off.
self.addFromUpperLowerFile(self.repository.nameOfEndFile.value) # Add an end file if it exists.
def addToolSettingLines(self, toolName):
"Add tool setting lines."
craftModule = skeinforge_craft.getCraftModule(toolName)
preferences = settings.getReadRepository(craftModule.getNewRepository()).preferences
for preference in preferences:
if preference.name.startswith('Activate %s' % toolName.capitalize()):
if preference.value == False:
return
for preference in preferences:
valueWithoutReturn = str(preference.value).replace('\n', ' ').replace('\r', ' ')
if preference.name != 'WindowPosition' and not preference.name.startswith('Open File'):
line = '%s %s %s' % (toolName, preference.name.replace(' ', '_'), valueWithoutReturn)
self.distanceFeedRate.addTagBracketedLine('setting', line)
def getCraftedGcode( self, repository, gcodeText ):
"Parse gcode text and store the bevel gcode."
self.repository = repository
self.svgReader.parseSVG('', gcodeText)
if self.svgReader.sliceDictionary == None:
print('Warning, nothing will be done because the sliceDictionary could not be found getCraftedGcode in preface.')
return ''
self.distanceFeedRate.decimalPlacesCarried = int(self.svgReader.sliceDictionary['decimalPlacesCarried'])
self.addInitializationToOutput()
for rotatedLoopLayerIndex, rotatedLoopLayer in enumerate(self.svgReader.rotatedLoopLayers):
settings.printProgressByNumber(rotatedLoopLayerIndex, len(self.svgReader.rotatedLoopLayers), 'preface')
self.addPreface( rotatedLoopLayer )
self.addShutdownToOutput()
return self.distanceFeedRate.output.getvalue()
def __init__(self): 'Add empty lists.' self.layerHeight = 1.0 self.maximumZ = - 987654321.0 self.minimumZ = 987654321.0 self.svgReader = SVGReader()
def __init__(self): "Add empty lists." self.layerThickness = 1.0 self.maximumZ = - 999999999.0 self.minimumZ = 999999999.0 self.svgReader = SVGReader()
class PrefaceSkein:
"A class to preface a skein of extrusions."
def __init__(self):
self.distanceFeedRate = gcodec.DistanceFeedRate()
self.extruderActive = False
self.lineIndex = 0
self.oldLocation = None
self.svgReader = SVGReader()
def addFromUpperLowerFile( self, fileName ):
"Add lines of text from the fileName or the lowercase fileName, if there is no file by the original fileName in the directory."
fileText = settings.getFileInAlterationsOrGivenDirectory( os.path.dirname( __file__ ), fileName )
fileLines = archive.getTextLines(fileText)
self.distanceFeedRate.addLinesSetAbsoluteDistanceMode( fileLines )
def addInitializationToOutput(self):
"Add initialization gcode to the output."
self.addFromUpperLowerFile( self.prefaceRepository.nameOfStartFile.value ) # Add a start file if it exists.
self.distanceFeedRate.addTagBracketedLine('creation', 'skeinforge') # GCode formatted comment
absoluteFilePathUntilDot = os.path.abspath( __file__ )[ : os.path.abspath( __file__ ).rfind('.') ]
if absoluteFilePathUntilDot == '/home/enrique/Desktop/backup/babbleold/script/reprap/fabmetheus/skeinforge_application/skeinforge_plugins/craft_plugins/preface': #is this script on Enrique's computer?
archive.writeFileText( archive.getVersionFileName(), date.today().isoformat().replace('-', '.')[ 2 : ] )
versionText = archive.getFileText( archive.getVersionFileName() )
self.distanceFeedRate.addTagBracketedLine('version', versionText ) # GCode formatted comment
self.distanceFeedRate.addLine('(<extruderInitialization>)') # GCode formatted comment
if self.prefaceRepository.setPositioningToAbsolute.value:
self.distanceFeedRate.addLine('G90') # Set positioning to absolute.
if self.prefaceRepository.setUnitsToMillimeters.value:
self.distanceFeedRate.addLine('G21') # Set units to millimeters.
if self.prefaceRepository.startAtHome.value:
self.distanceFeedRate.addLine('G28') # Start at home.
if self.prefaceRepository.turnExtruderOffAtStartUp.value:
self.distanceFeedRate.addLine('M103') # Turn extruder off.
craftTypeName = skeinforge_profile.getCraftTypeName()
self.distanceFeedRate.addTagBracketedLine('craftTypeName', craftTypeName )
self.distanceFeedRate.addTagBracketedLine('decimalPlacesCarried', self.distanceFeedRate.decimalPlacesCarried )
layerThickness = float( self.svgReader.sliceDictionary['layerThickness'] )
self.distanceFeedRate.addTagBracketedLine('layerThickness', self.distanceFeedRate.getRounded( layerThickness ) )
if self.prefaceRepository.meta.value:
self.distanceFeedRate.addTagBracketedLine('meta', self.prefaceRepository.meta.value )
perimeterWidth = float( self.svgReader.sliceDictionary['perimeterWidth'] )
self.distanceFeedRate.addTagBracketedLine('perimeterWidth', self.distanceFeedRate.getRounded( perimeterWidth ) )
self.distanceFeedRate.addTagBracketedLine('profileName', skeinforge_profile.getProfileName( craftTypeName ) )
self.distanceFeedRate.addTagBracketedLine('procedureDone', self.svgReader.sliceDictionary['procedureDone'] )
self.distanceFeedRate.addTagBracketedLine('procedureDone', 'preface')
self.distanceFeedRate.addLine('(</extruderInitialization>)') # Initialization is finished, extrusion is starting.
self.distanceFeedRate.addLine('(<extrusion>)') # Initialization is finished, extrusion is starting.
def addPreface( self, rotatedBoundaryLayer ):
"Add preface to the carve layer."
self.distanceFeedRate.addLine('(<layer> %s )' % rotatedBoundaryLayer.z ) # Indicate that a new layer is starting.
if rotatedBoundaryLayer.rotation != None:
self.distanceFeedRate.addTagBracketedLine('bridgeRotation', str( rotatedBoundaryLayer.rotation ) ) # Indicate the bridge rotation.
for loop in rotatedBoundaryLayer.loops:
self.distanceFeedRate.addGcodeFromLoop( loop, rotatedBoundaryLayer.z )
self.distanceFeedRate.addLine('(</layer>)')
def addShutdownToOutput(self):
"Add shutdown gcode to the output."
self.distanceFeedRate.addLine('(</extrusion>)') # GCode formatted comment
if self.prefaceRepository.turnExtruderOffAtShutDown.value:
self.distanceFeedRate.addLine('M103') # Turn extruder motor off.
self.addFromUpperLowerFile( self.prefaceRepository.nameOfEndFile.value ) # Add an end file if it exists.
def getCraftedGcode( self, prefaceRepository, gcodeText ):
"Parse gcode text and store the bevel gcode."
self.prefaceRepository = prefaceRepository
self.svgReader.parseSVG('', gcodeText )
self.distanceFeedRate.decimalPlacesCarried = int( self.svgReader.sliceDictionary['decimalPlacesCarried'] )
self.addInitializationToOutput()
for rotatedBoundaryLayerIndex, rotatedBoundaryLayer in enumerate(self.svgReader.rotatedLoopLayers):
settings.printProgressByNumber(rotatedBoundaryLayerIndex, len(self.svgReader.rotatedLoopLayers), 'preface')
self.addPreface( rotatedBoundaryLayer )
self.addShutdownToOutput()
return self.distanceFeedRate.output.getvalue()
class PrefaceSkein:
"A class to preface a skein of extrusions."
def __init__(self):
self.distanceFeedRate = gcodec.DistanceFeedRate()
self.extruderActive = False
self.lineIndex = 0
self.oldLocation = None
self.svgReader = SVGReader()
def addFromUpperLowerFile(self, fileName):
"Add lines of text from the fileName or the lowercase fileName, if there is no file by the original fileName in the directory."
self.distanceFeedRate.addLinesSetAbsoluteDistanceMode(settings.getLinesInAlterationsOrGivenDirectory(fileName))
def addInitializationToOutput(self):
"Add initialization gcode to the output."
self.addFromUpperLowerFile(self.repository.nameOfStartFile.value) # Add a start file if it exists.
self.distanceFeedRate.addTagBracketedLine('creation', 'skeinforge') # GCode formatted comment
absoluteFilePathUntilDot = os.path.abspath(__file__)[: os.path.abspath(__file__).rfind('.')]
if absoluteFilePathUntilDot == '/home/enrique/Desktop/backup/babbleold/script/reprap/fabmetheus/skeinforge_application/skeinforge_plugins/craft_plugins/preface': #is this script on Enrique's computer?
archive.writeFileText(archive.getVersionFileName(), date.today().isoformat().replace('-', '.')[2 :])
versionText = archive.getFileText(archive.getVersionFileName())
self.distanceFeedRate.addTagBracketedLine('version', versionText) # GCode formatted comment
self.distanceFeedRate.addLine('(<extruderInitialization>)') # GCode formatted comment
if self.repository.setPositioningToAbsolute.value:
self.distanceFeedRate.addLine('G90 ;set positioning to absolute') # Set positioning to absolute.
if self.repository.setUnitsToMillimeters.value:
self.distanceFeedRate.addLine('G21 ;set units to millimeters') # Set units to millimeters.
if self.repository.startAtHome.value:
self.distanceFeedRate.addLine('G28 ;start at home') # Start at home.
if self.repository.turnExtruderOffAtStartUp.value:
self.distanceFeedRate.addLine('M103') # Turn extruder off.
craftTypeName = skeinforge_profile.getCraftTypeName()
self.distanceFeedRate.addTagBracketedLine('craftTypeName', craftTypeName)
self.distanceFeedRate.addTagBracketedLine('decimalPlacesCarried', self.distanceFeedRate.decimalPlacesCarried)
layerThickness = float(self.svgReader.sliceDictionary['layerThickness'])
self.distanceFeedRate.addTagRoundedLine('layerThickness', layerThickness)
if self.repository.meta.value:
self.distanceFeedRate.addTagBracketedLine('meta', self.repository.meta.value)
perimeterWidth = float(self.svgReader.sliceDictionary['perimeterWidth'])
self.distanceFeedRate.addTagRoundedLine('perimeterWidth', perimeterWidth)
self.distanceFeedRate.addTagBracketedLine('profileName', skeinforge_profile.getProfileName(craftTypeName))
procedureNames = self.svgReader.sliceDictionary['procedureName'].replace(',', ' ').split()
for procedureName in procedureNames:
self.distanceFeedRate.addTagBracketedLine('procedureName', procedureName)
self.distanceFeedRate.addTagBracketedLine('procedureName', 'preface')
self.distanceFeedRate.addLine('(</extruderInitialization>)') # Initialization is finished, extrusion is starting.
self.distanceFeedRate.addLine('(<crafting>)') # Initialization is finished, crafting is starting.
def addPreface( self, rotatedLoopLayer ):
"Add preface to the carve layer."
self.distanceFeedRate.addLine('(<layer> %s )' % rotatedLoopLayer.z ) # Indicate that a new layer is starting.
if rotatedLoopLayer.rotation != None:
self.distanceFeedRate.addTagBracketedLine('bridgeRotation', str( rotatedLoopLayer.rotation ) ) # Indicate the bridge rotation.
for loop in rotatedLoopLayer.loops:
self.distanceFeedRate.addGcodeFromLoop(loop, rotatedLoopLayer.z)
self.distanceFeedRate.addLine('(</layer>)')
def addShutdownToOutput(self):
"Add shutdown gcode to the output."
self.distanceFeedRate.addLine('(</crafting>)') # GCode formatted comment
if self.repository.turnExtruderOffAtShutDown.value:
self.distanceFeedRate.addLine('M103') # Turn extruder motor off.
self.addFromUpperLowerFile(self.repository.nameOfEndFile.value) # Add an end file if it exists.
def getCraftedGcode( self, repository, gcodeText ):
"Parse gcode text and store the bevel gcode."
self.repository = repository
self.svgReader.parseSVG('', gcodeText)
if self.svgReader.sliceDictionary == None:
print('Warning, nothing will be done because the sliceDictionary could not be found getCraftedGcode in preface.')
return ''
self.distanceFeedRate.decimalPlacesCarried = int(self.svgReader.sliceDictionary['decimalPlacesCarried'])
self.addInitializationToOutput()
for rotatedLoopLayerIndex, rotatedLoopLayer in enumerate(self.svgReader.rotatedLoopLayers):
settings.printProgressByNumber(rotatedLoopLayerIndex, len(self.svgReader.rotatedLoopLayers), 'preface')
self.addPreface( rotatedLoopLayer )
self.addShutdownToOutput()
return self.distanceFeedRate.output.getvalue()
class SVGCarving:
"An svg carving."
def __init__(self):
"Add empty lists."
self.layerThickness = 1.0
self.maximumZ = -999999999.0
self.minimumZ = 999999999.0
self.svgReader = SVGReader()
def __repr__(self):
"Get the string representation of this carving."
return self.getCarvedSVG()
def addXML(self, depth, output):
"Add xml for this object."
xml_simple_writer.addXMLFromObjects(depth,
self.svgReader.rotatedLoopLayers,
output)
def getCarveCornerMaximum(self):
"Get the corner maximum of the vertexes."
return self.cornerMaximum
def getCarveCornerMinimum(self):
"Get the corner minimum of the vertexes."
return self.cornerMinimum
def getCarvedSVG(self):
"Get the carved svg text."
return svg_writer.getSVGByLoopLayers(True,
self.svgReader.rotatedLoopLayers,
self)
def getCarveLayerThickness(self):
"Get the layer thickness."
return self.layerThickness
def getCarveRotatedBoundaryLayers(self):
"Get the rotated boundary layers."
return self.svgReader.rotatedLoopLayers
def getFabmetheusXML(self):
"Return the fabmetheus XML."
return None
def getInterpretationSuffix(self):
"Return the suffix for a carving."
return 'svg'
def parseInitialization(self):
"Parse gcode initialization and store the parameters."
if self.svgReader.sliceDictionary == None:
return
self.layerThickness = euclidean.getFloatDefaultByDictionary(
self.layerThickness, self.svgReader.sliceDictionary,
'layerThickness')
self.maximumZ = euclidean.getFloatDefaultByDictionary(
self.maximumZ, self.svgReader.sliceDictionary, 'maxZ')
self.minimumZ = euclidean.getFloatDefaultByDictionary(
self.minimumZ, self.svgReader.sliceDictionary, 'minZ')
def parseSVG(self, fileName, svgText):
"Parse SVG text and store the layers."
if svgText == '':
return
self.fileName = fileName
self.svgReader.parseSVG(fileName, svgText)
self.parseInitialization()
self.cornerMaximum = Vector3(-999999999.0, -999999999.0, self.maximumZ)
self.cornerMinimum = Vector3(999999999.0, 999999999.0, self.minimumZ)
svg_writer.setSVGCarvingCorners(self.svgReader.rotatedLoopLayers, self)
def setCarveBridgeLayerThickness(self, bridgeLayerThickness):
"Set the bridge layer thickness. If the infill is not in the direction of the bridge, the bridge layer thickness should be given as None or not set at all."
pass
def setCarveLayerThickness(self, layerThickness):
"Set the layer thickness."
self.layerThickness = layerThickness
def setCarveImportRadius(self, importRadius):
"Set the import radius."
pass
def setCarveIsCorrectMesh(self, isCorrectMesh):
"Set the is correct mesh flag."
pass
class SVGCarving: "An svg carving." def __init__( self ): "Add empty lists." self.layerThickness = 1.0 self.maximumZ = - 999999999.0 self.minimumZ = 999999999.0 self.svgReader = SVGReader() def __repr__( self ): "Get the string representation of this carving." return self.getCarvedSVG() def addXML( self, depth, output ): "Add xml for this object." xml_simple_writer.addXMLFromObjects( depth, self.svgReader.rotatedLoopLayers, output ) def getCarveCornerMaximum( self ): "Get the corner maximum of the vertices." return self.cornerMaximum def getCarveCornerMinimum( self ): "Get the corner minimum of the vertices." return self.cornerMinimum def getCarvedSVG( self ): "Get the carved svg text." if len( self.svgReader.rotatedLoopLayers ) < 1: return '' decimalPlacesCarried = max(0, 2 - int(math.floor(math.log10(self.layerThickness)))) self.svgWriter = svg_writer.SVGWriter(True, self, decimalPlacesCarried) return self.svgWriter.getReplacedSVGTemplate(self.fileName, 'basic', self.svgReader.rotatedLoopLayers) def getCarveLayerThickness( self ): "Get the layer thickness." return self.layerThickness def getCarveRotatedBoundaryLayers( self ): "Get the rotated boundary layers." return self.svgReader.rotatedLoopLayers def getInterpretationSuffix( self ): "Return the suffix for a carving." return 'svg' def parseInitialization( self ): "Parse gcode initialization and store the parameters." if self.svgReader.sliceDictionary == None: return self.layerThickness = euclidean.getFloatDefaultByDictionary( self.layerThickness, self.svgReader.sliceDictionary, 'layerThickness') self.maximumZ = euclidean.getFloatDefaultByDictionary( self.maximumZ, self.svgReader.sliceDictionary, 'maxZ') self.minimumZ = euclidean.getFloatDefaultByDictionary( self.minimumZ, self.svgReader.sliceDictionary, 'minZ') def parseSVG( self, fileName, svgText ): "Parse SVG text and store the layers." if svgText == '': return self.svgReader.parseSVG( fileName, svgText ) self.parseInitialization() self.cornerMaximum = Vector3( - 999999999.0, - 999999999.0, self.maximumZ ) self.cornerMinimum = Vector3( 999999999.0, 999999999.0, self.minimumZ ) for rotatedBoundaryLayer in self.svgReader.rotatedLoopLayers: for loop in rotatedBoundaryLayer.loops: for point in loop: pointVector3 = Vector3( point.real, point.imag, rotatedBoundaryLayer.z ) self.cornerMaximum = euclidean.getPointMaximum( self.cornerMaximum, pointVector3 ) self.cornerMinimum = euclidean.getPointMinimum( self.cornerMinimum, pointVector3 ) def setCarveBridgeLayerThickness( self, bridgeLayerThickness ): "Set the bridge layer thickness. If the infill is not in the direction of the bridge, the bridge layer thickness should be given as None or not set at all." pass def setCarveLayerThickness( self, layerThickness ): "Set the layer thickness." self.layerThickness = layerThickness def setCarveImportRadius( self, importRadius ): "Set the import radius." pass def setCarveIsCorrectMesh( self, isCorrectMesh ): "Set the is correct mesh flag." pass
class PrefaceSkein(object):
"A class to preface a skein of extrusions."
def __init__(self):
self.distanceFeedRate = gcodec.DistanceFeedRate()
self.extruderActive = False
self.lineIndex = 0
self.oldLocation = None
self.svgReader = SVGReader()
def addInitializationToOutput(self):
"Add initialization gcode to the output."
self.distanceFeedRate.addTagBracketedLine('format', 'skeinforge gcode')
absoluteFilePathUntilDot = archive.getUntilDot(archive.getCraftPluginsDirectoryPath('preface.py'))
dateTodayString = date.today().isoformat().replace('-', '.')[2 :]
if absoluteFilePathUntilDot == '/home/enrique/Desktop/backup/babbleold/script/reprap/fabmetheus/skeinforge_application/skeinforge_plugins/craft_plugins/preface': #is this script on Enrique's computer?
archive.writeFileText(archive.getVersionFileName(), dateTodayString)
versionText = archive.getFileText(archive.getVersionFileName())
self.distanceFeedRate.addTagBracketedLine('version', versionText)
dateTimeTuple = datetime.now().timetuple()
created = dateTodayString + '|%s:%s' % (dateTimeTuple[3], dateTimeTuple[4])
self.distanceFeedRate.addTagBracketedLine('created', created)
self.distanceFeedRate.addLine('(<extruderInitialization>)')
if self.repository.setPositioningToAbsolute.value:
self.distanceFeedRate.addLine('G90 ;set positioning to absolute') # Set positioning to absolute.
if self.repository.setUnitsToMillimeters.value:
self.distanceFeedRate.addLine('G21 ;set units to millimeters') # Set units to millimeters.
if self.repository.startAtHome.value:
self.distanceFeedRate.addLine('G28 ;start at home') # Start at home.
if self.repository.turnExtruderOffAtStartUp.value:
self.distanceFeedRate.addLine('M103') # Turn extruder off.
craftTypeName = skeinforge_profile.getCraftTypeName()
self.distanceFeedRate.addTagBracketedLine('craftTypeName', craftTypeName)
self.distanceFeedRate.addTagBracketedLine('decimalPlacesCarried', self.distanceFeedRate.decimalPlacesCarried)
layerHeight = float(self.svgReader.sliceDictionary['layerHeight'])
self.distanceFeedRate.addTagRoundedLine('layerThickness', layerHeight)
self.distanceFeedRate.addTagRoundedLine('layerHeight', layerHeight)
if self.repository.meta.value:
self.distanceFeedRate.addTagBracketedLine('meta', self.repository.meta.value)
edgeWidth = float(self.svgReader.sliceDictionary['edgeWidth'])
self.distanceFeedRate.addTagRoundedLine('edgeWidth', edgeWidth)
self.distanceFeedRate.addTagRoundedLine('perimeterWidth', edgeWidth)
self.distanceFeedRate.addTagBracketedLine('profileName', skeinforge_profile.getProfileName(craftTypeName))
self.distanceFeedRate.addLine('(<settings>)')
pluginFileNames = skeinforge_craft.getPluginFileNames()
for pluginFileName in pluginFileNames:
self.addToolSettingLines(pluginFileName)
self.distanceFeedRate.addLine('(</settings>)')
self.distanceFeedRate.addTagBracketedLine('timeStampPreface', strftime('%Y%m%d_%H%M%S'))
procedureNames = self.svgReader.sliceDictionary['procedureName'].replace(',', ' ').split()
for procedureName in procedureNames:
self.distanceFeedRate.addTagBracketedProcedure(procedureName)
self.distanceFeedRate.addTagBracketedProcedure('preface')
self.distanceFeedRate.addLine('(</extruderInitialization>)') # Initialization is finished, extrusion is starting.
self.distanceFeedRate.addLine('(<crafting>)') # Initialization is finished, crafting is starting.
def addPreface( self, loopLayer ):
"Add preface to the carve layer."
self.distanceFeedRate.addLine('(<layer> %s )' % loopLayer.z ) # Indicate that a new layer is starting.
for loop in loopLayer.loops:
self.distanceFeedRate.addGcodeFromLoop(loop, loopLayer.z)
self.distanceFeedRate.addLine('(</layer>)')
def addShutdownToOutput(self):
"Add shutdown gcode to the output."
self.distanceFeedRate.addLine('(</crafting>)') # GCode formatted comment
if self.repository.turnExtruderOffAtShutDown.value:
self.distanceFeedRate.addLine('M103') # Turn extruder motor off.
def addToolSettingLines(self, pluginName):
"Add tool setting lines."
preferences = skeinforge_craft.getCraftPreferences(pluginName)
if skeinforge_craft.getCraftValue('Activate %s' % pluginName.capitalize(), preferences) != True:
return
for preference in preferences:
valueWithoutReturn = str(preference.value).replace('\n', ' ').replace('\r', ' ')
if preference.name != 'WindowPosition' and not preference.name.startswith('Open File'):
line = '%s %s %s' % (pluginName, preference.name.replace(' ', '_'), valueWithoutReturn)
self.distanceFeedRate.addTagBracketedLine('setting', line)
def getCraftedGcode( self, repository, gcodeText ):
"Parse gcode text and store the bevel gcode."
self.repository = repository
self.svgReader.parseSVG('', gcodeText)
if self.svgReader.sliceDictionary == None:
print('Warning, nothing will be done because the sliceDictionary could not be found getCraftedGcode in preface.')
return ''
self.distanceFeedRate.decimalPlacesCarried = int(self.svgReader.sliceDictionary['decimalPlacesCarried'])
self.addInitializationToOutput()
for loopLayerIndex, loopLayer in enumerate(self.svgReader.loopLayers):
settings.printProgressByNumber(loopLayerIndex, len(self.svgReader.loopLayers), 'preface')
self.addPreface( loopLayer )
self.addShutdownToOutput()
return self.distanceFeedRate.output.getvalue()
class SVGCarving: "An svg carving." def __init__(self): "Add empty lists." self.layerThickness = 1.0 self.maximumZ = - 999999999.0 self.minimumZ = 999999999.0 self.svgReader = SVGReader() def __repr__(self): "Get the string representation of this carving." return self.getCarvedSVG() def addXML(self, depth, output): "Add xml for this object." xml_simple_writer.addXMLFromObjects( depth, self.svgReader.rotatedLoopLayers, output ) def getCarveCornerMaximum(self): "Get the corner maximum of the vertexes." return self.cornerMaximum def getCarveCornerMinimum(self): "Get the corner minimum of the vertexes." return self.cornerMinimum def getCarvedSVG(self): "Get the carved svg text." return svg_writer.getSVGByLoopLayers(True, self.svgReader.rotatedLoopLayers, self) def getCarveLayerThickness(self): "Get the layer thickness." return self.layerThickness def getCarveRotatedBoundaryLayers(self): "Get the rotated boundary layers." return self.svgReader.rotatedLoopLayers def getFabmetheusXML(self): "Return the fabmetheus XML." return None def getInterpretationSuffix(self): "Return the suffix for a carving." return 'svg' def parseInitialization(self): "Parse gcode initialization and store the parameters." if self.svgReader.sliceDictionary == None: return self.layerThickness = euclidean.getFloatDefaultByDictionary( self.layerThickness, self.svgReader.sliceDictionary, 'layerThickness') self.maximumZ = euclidean.getFloatDefaultByDictionary( self.maximumZ, self.svgReader.sliceDictionary, 'maxZ') self.minimumZ = euclidean.getFloatDefaultByDictionary( self.minimumZ, self.svgReader.sliceDictionary, 'minZ') def parseSVG( self, fileName, svgText ): "Parse SVG text and store the layers." if svgText == '': return self.fileName = fileName self.svgReader.parseSVG(fileName, svgText) self.parseInitialization() self.cornerMaximum = Vector3(-999999999.0, -999999999.0, self.maximumZ) self.cornerMinimum = Vector3(999999999.0, 999999999.0, self.minimumZ) svg_writer.setSVGCarvingCorners(self.svgReader.rotatedLoopLayers, self) def setCarveBridgeLayerThickness( self, bridgeLayerThickness ): "Set the bridge layer thickness. If the infill is not in the direction of the bridge, the bridge layer thickness should be given as None or not set at all." pass def setCarveLayerThickness( self, layerThickness ): "Set the layer thickness." self.layerThickness = layerThickness def setCarveImportRadius( self, importRadius ): "Set the import radius." pass def setCarveIsCorrectMesh( self, isCorrectMesh ): "Set the is correct mesh flag." pass
def __init__(self):
'Add empty lists.'
self.layerHeight = 1.0
self.maximumZ = -987654321.0
self.minimumZ = 987654321.0
self.svgReader = SVGReader()
class SVGCarving: 'An svg carving.' def __init__(self): 'Add empty lists.' self.layerHeight = 1.0 self.maximumZ = - 987654321.0 self.minimumZ = 987654321.0 self.svgReader = SVGReader() def __repr__(self): 'Get the string representation of this carving.' return self.getCarvedSVG() def addXML(self, depth, output): 'Add xml for this object.' xml_simple_writer.addXMLFromObjects(depth, self.svgReader.loopLayers, output) def getCarveBoundaryLayers(self): 'Get the boundary layers.' return self.svgReader.loopLayers def getCarveCornerMaximum(self): 'Get the corner maximum of the vertexes.' return self.cornerMaximum def getCarveCornerMinimum(self): 'Get the corner minimum of the vertexes.' return self.cornerMinimum def getCarvedSVG(self): 'Get the carved svg text.' return svg_writer.getSVGByLoopLayers(True, self, self.svgReader.loopLayers) def getCarveLayerHeight(self): 'Get the layer height.' return self.layerHeight def getFabmetheusXML(self): 'Return the fabmetheus XML.' return None def getInterpretationSuffix(self): 'Return the suffix for a carving.' return 'svg' def parseSVG(self, fileName, svgText): 'Parse SVG text and store the layers.' if svgText == '': return self.fileName = fileName self.svgReader.parseSVG(fileName, svgText) self.layerHeight = euclidean.getFloatDefaultByDictionary( self.layerHeight, self.svgReader.sliceDictionary, 'layerHeight') self.cornerMaximum = Vector3(-987654321.0, -987654321.0, self.maximumZ) self.cornerMinimum = Vector3(987654321.0, 987654321.0, self.minimumZ) svg_writer.setSVGCarvingCorners( self.cornerMaximum, self.cornerMinimum, self.layerHeight, self.svgReader.loopLayers) def setCarveImportRadius(self, importRadius): 'Set the import radius.' pass def setCarveIsCorrectMesh(self, isCorrectMesh): 'Set the is correct mesh flag.' pass def setCarveLayerHeight(self, layerHeight): 'Set the layer height.' self.layerHeight = layerHeight
class SVGCarving: """An svg carving.""" def __init__(self): """Add empty lists.""" self.extrusionHeight = 1.0 self.maximumZ = - 987654321.0 self.minimumZ = 987654321.0 self.svgReader = SVGReader() def __repr__(self): """Get the string representation of this carving.""" return self.getCarvedSVG() def addXML(self, depth, output): """Add xml for this object.""" xml_simple_writer.addXMLFromObjects(depth, self.svgReader.rotatedLoopLayers, output) def getCarveCornerMaximum(self): """Get the corner maximum of the vertexes.""" return self.cornerMaximum def getCarveCornerMinimum(self): """Get the corner minimum of the vertexes.""" return self.cornerMinimum def getCarvedSVG(self): """Get the carved svg text.""" return svg_writer.getSVGByLoopLayers(True, self, self.svgReader.rotatedLoopLayers) def getCarveLayerThickness(self): """Get the layer thickness.""" return self.extrusionHeight def getCarveRotatedBoundaryLayers(self): """Get the rotated boundary layers.""" return self.svgReader.rotatedLoopLayers def getFabmetheusXML(self): """Return the fabmetheus XML.""" return None def getInterpretationSuffix(self): """Return the suffix for a carving.""" return 'svg' def parseSVG(self, fileName, svgText): """Parse SVG text and store the layers.""" if svgText == '': return self.fileName = fileName self.svgReader.parseSVG(fileName, svgText) self.extrusionHeight = euclidean.getFloatDefaultByDictionary( self.extrusionHeight, self.svgReader.sliceDictionary, 'extrusionHeight') self.cornerMaximum = Vector3(-987654321.0, -987654321.0, self.maximumZ) self.cornerMinimum = Vector3(987654321.0, 987654321.0, self.minimumZ) svg_writer.setSVGCarvingCorners( self.cornerMaximum, self.cornerMinimum, self.extrusionHeight, self.svgReader.rotatedLoopLayers) def setCarveInfillInDirectionOfBridge(self, infillInDirectionOfBridge): """Set the infill in direction of bridge.""" pass def setCarveLayerThickness(self, extrusionHeight): """Set the layer thickness.""" self.extrusionHeight = extrusionHeight def setCarveImportRadius(self, importRadius): """Set the import radius.""" pass def setCarveIsCorrectMesh(self, isCorrectMesh): """Set the is correct mesh flag.""" pass
class PrefaceSkein:
"""A class to preface a skein of extrusions."""
def __init__(self):
self.distanceFeedRate = gcodec.DistanceFeedRate()
self.extruderActive = False
self.lineIndex = 0
self.oldLocation = None
self.svgReader = SVGReader()
def addFromUpperLowerFile(self, fileName):
"""Add lines of text from the fileName or the lowercase fileName, if there is no file by the original fileName in the directory."""
self.distanceFeedRate.addLinesSetAbsoluteDistanceMode(settings.getLinesInAlterationsOrGivenDirectory(fileName))
def addInitializationToOutput(self):
"""Add initialization gcode to the output."""
self.addFromUpperLowerFile(self.repository.nameOfStartFile.value) # Add a start file if it exists.
self.distanceFeedRate.addTagBracketedLine('creation', 'skeinforge') # GCode formatted comment
absoluteFilePathUntilDot = os.path.abspath(__file__)[: os.path.abspath(__file__).rfind('.')]
if absoluteFilePathUntilDot == '/home/enrique/Desktop/backup/babbleold/script/reprap/fabmetheus/skeinforge_application/skeinforge_plugins/craft_plugins/preface': #is this script on Enrique's computer?
archive.writeFileText(archive.getVersionFileName(), date.today().isoformat().replace('-', '.')[2 :])
versionText = archive.getFileText(archive.getVersionFileName())
self.distanceFeedRate.addTagBracketedLine('version', versionText) # GCode formatted comment
self.distanceFeedRate.addLine('(<extruderInitialization>)') # GCode formatted comment
if self.repository.setPositioningToAbsolute.value:
self.distanceFeedRate.addLine('G90 ;set positioning to absolute') # Set positioning to absolute.
if self.repository.setUnitsToMillimeters.value:
self.distanceFeedRate.addLine('G21 ;set units to millimeters') # Set units to millimeters.
if self.repository.startAtHome.value:
self.distanceFeedRate.addLine('G28 ;start at home') # Start at home.
if self.repository.resetExtruder.value:
self.distanceFeedRate.addLine('G92 E0 ;reset extruder distance') # Start at home.
craftTypeName = skeinforge_profile.getCraftTypeName()
self.distanceFeedRate.addTagBracketedLine('craftTypeName', craftTypeName)
self.distanceFeedRate.addTagBracketedLine('decimalPlacesCarried', self.distanceFeedRate.decimalPlacesCarried)
extrusionHeight = float(self.svgReader.sliceDictionary['extrusionHeight'])
self.distanceFeedRate.addTagRoundedLine('extrusionHeight', extrusionHeight)
if self.repository.meta.value:
self.distanceFeedRate.addTagBracketedLine('meta', self.repository.meta.value)
extrusionWidth = float(self.svgReader.sliceDictionary['extrusionWidth'])
self.distanceFeedRate.addTagRoundedLine('extrusionWidth', extrusionWidth)
self.distanceFeedRate.addTagBracketedLine('profileName', skeinforge_profile.getProfileName(craftTypeName))
procedureNames = self.svgReader.sliceDictionary['procedureName'].replace(',', ' ').split()
for procedureName in procedureNames:
self.distanceFeedRate.addTagBracketedLine('procedureName', procedureName)
self.distanceFeedRate.addTagBracketedLine('procedureName', 'preface')
self.distanceFeedRate.addLine('(</extruderInitialization>)') # Initialization is finished, extrusion is starting.
self.distanceFeedRate.addLine('(<crafting>)') # Initialization is finished, crafting is starting.
def addPreface( self, rotatedLoopLayer ):
"""Add preface to the carve layer."""
self.distanceFeedRate.addLine('(<layer> %s )' % rotatedLoopLayer.z ) # Indicate that a new layer is starting.
if rotatedLoopLayer.rotation is not None:
self.distanceFeedRate.addTagBracketedLine('bridgeRotation', str( rotatedLoopLayer.rotation ) ) # Indicate the bridge rotation.
for loop in rotatedLoopLayer.loops:
self.distanceFeedRate.addGcodeFromLoop(loop, rotatedLoopLayer.z)
self.distanceFeedRate.addLine('(</layer>)')
def addShutdownToOutput(self):
"Add shutdown gcode to the output."
self.distanceFeedRate.addLine('(</crafting>)') # GCode formatted comment
self.addFromUpperLowerFile(self.repository.nameOfEndFile.value) # Add an end file if it exists.
def getCraftedGcode( self, repository, gcodeText ):
"""Parse gcode text and store the bevel gcode."""
self.repository = repository
self.svgReader.parseSVG('', gcodeText)
if self.svgReader.sliceDictionary is None:
print('Warning, nothing will be done because the sliceDictionary could not be found getCraftedGcode in preface.')
return ''
self.distanceFeedRate.decimalPlacesCarried = int(self.svgReader.sliceDictionary['decimalPlacesCarried'])
self.addInitializationToOutput()
for rotatedLoopLayerIndex, rotatedLoopLayer in enumerate(self.svgReader.rotatedLoopLayers):
settings.printProgressByNumber(rotatedLoopLayerIndex, len(self.svgReader.rotatedLoopLayers), 'preface')
self.addPreface( rotatedLoopLayer )
self.addShutdownToOutput()
return self.distanceFeedRate.output.getvalue()
class PrefaceSkein:
"A class to preface a skein of extrusions."
def __init__(self):
self.distanceFeedRate = gcodec.DistanceFeedRate()
self.extruderActive = False
self.lineIndex = 0
self.oldLocation = None
self.svgReader = SVGReader()
self.doingLayerN = 0
def addFromUpperLowerFile(self, fileName):
"Add lines of text from the fileName or the lowercase fileName, if there is no file by the original fileName in the directory."
fileText = settings.getFileInAlterationsOrGivenDirectory(
os.path.dirname(__file__), fileName)
fileLines = gcodec.getTextLines(fileText)
self.distanceFeedRate.addLinesSetAbsoluteDistanceMode(fileLines)
def addInitializationToOutput(self):
"Add initialization gcode to the output."
self.addFromUpperLowerFile(self.prefaceRepository.nameOfStartFile.value
) # Add a start file if it exists.
self.distanceFeedRate.addTagBracketedLine(
'creation', 'skeinforge') # GCode formatted comment
absoluteFilePathUntilDot = os.path.abspath(
__file__)[:os.path.abspath(__file__).rfind('.')]
if absoluteFilePathUntilDot == '/home/enrique/Desktop/backup/babbleold/script/reprap/fabmetheus/skeinforge_application/skeinforge_plugins/craft_plugins/preface': #is this script on Enrique's computer?
gcodec.writeFileText(
gcodec.getVersionFileName(),
date.today().isoformat().replace('-', '.')[2:])
versionText = gcodec.getFileText(gcodec.getVersionFileName())
self.distanceFeedRate.addTagBracketedLine(
'version', versionText) # GCode formatted comment
self.distanceFeedRate.addLine(
'(<extruderInitialization>)') # GCode formatted comment
if self.prefaceRepository.setPositioningToAbsolute.value:
self.distanceFeedRate.addLine(
'G90') # Set positioning to absolute.
if self.prefaceRepository.setUnitsToMillimeters.value:
self.distanceFeedRate.addLine('G21') # Set units to millimeters.
if self.prefaceRepository.startAtHome.value:
self.distanceFeedRate.addLine('G28') # Start at home.
if self.prefaceRepository.turnExtruderOffAtStartUp.value:
self.distanceFeedRate.addLine('M103') # Turn extruder off.
craftTypeName = skeinforge_profile.getCraftTypeName()
self.distanceFeedRate.addTagBracketedLine('craftTypeName',
craftTypeName)
self.distanceFeedRate.addTagBracketedLine(
'decimalPlacesCarried', self.distanceFeedRate.decimalPlacesCarried)
layerThickness = float(
self.svgReader.sliceDictionary['layerThickness'])
self.distanceFeedRate.addTagBracketedLine(
'layerThickness', self.distanceFeedRate.getRounded(layerThickness))
if self.prefaceRepository.meta.value:
self.distanceFeedRate.addTagBracketedLine(
'meta', self.prefaceRepository.meta.value)
perimeterWidth = float(
self.svgReader.sliceDictionary['perimeterWidth'])
self.distanceFeedRate.addTagBracketedLine(
'perimeterWidth', self.distanceFeedRate.getRounded(perimeterWidth))
self.distanceFeedRate.addTagBracketedLine(
'profileName', skeinforge_profile.getProfileName(craftTypeName))
self.distanceFeedRate.addTagBracketedLine(
'procedureDone', self.svgReader.sliceDictionary['procedureDone'])
self.distanceFeedRate.addTagBracketedLine('procedureDone', 'preface')
self.distanceFeedRate.addLine(
'(</extruderInitialization>)'
) # Initialization is finished, extrusion is starting.
self.distanceFeedRate.addLine(
'(<extrusion>)'
) # Initialization is finished, extrusion is starting.
def addPreface(self, rotatedBoundaryLayer):
"Add preface to the carve layer."
self.distanceFeedRate.addLine(
'(<layer> %s )' %
rotatedBoundaryLayer.z) # Indicate that a new layer is starting.
if rotatedBoundaryLayer.rotation != None:
self.distanceFeedRate.addTagBracketedLine(
'bridgeRotation', str(rotatedBoundaryLayer.rotation
)) # Indicate the bridge rotation.
for loop in rotatedBoundaryLayer.loops:
self.distanceFeedRate.addGcodeFromLoop(loop,
rotatedBoundaryLayer.z)
self.distanceFeedRate.addLine('(</layer>)')
self.doingLayerN = self.doingLayerN + 1
# print "Slice to GCode... z=%s " % rotatedBoundaryLayer.z, '\r',
# print "Slice to GCode... z=%s " % rotatedBoundaryLayer.z
print "Slice to GCode... layer %s. " % self.doingLayerN
sys.stdout.flush()
def addShutdownToOutput(self):
"Add shutdown gcode to the output."
self.distanceFeedRate.addLine(
'(</extrusion>)') # GCode formatted comment
if self.prefaceRepository.turnExtruderOffAtShutDown.value:
self.distanceFeedRate.addLine('M103') # Turn extruder motor off.
self.addFromUpperLowerFile(self.prefaceRepository.nameOfEndFile.value
) # Add an end file if it exists.
def getCraftedGcode(self, prefaceRepository, gcodeText):
"Parse gcode text and store the bevel gcode."
self.prefaceRepository = prefaceRepository
self.svgReader.parseSVG('', gcodeText)
self.distanceFeedRate.decimalPlacesCarried = int(
self.svgReader.sliceDictionary['decimalPlacesCarried'])
self.addInitializationToOutput()
for rotatedBoundaryLayer in self.svgReader.rotatedLoopLayers:
self.addPreface(rotatedBoundaryLayer)
print " The total Layer count is %s" % self.doingLayerN + "."
self.addShutdownToOutput()
return self.distanceFeedRate.output.getvalue()
def __init__(self): """Add empty lists.""" self.extrusionHeight = 1.0 self.maximumZ = - 987654321.0 self.minimumZ = 987654321.0 self.svgReader = SVGReader()
class PrefaceSkein:
"A class to preface a skein of extrusions."
def __init__(self):
self.distanceFeedRate = gcodec.DistanceFeedRate()
self.extruderActive = False
self.lineIndex = 0
self.oldLocation = None
self.svgReader = SVGReader()
def addInitializationToOutput(self):
"Add initialization gcode to the output."
self.distanceFeedRate.addTagBracketedLine("format", "skeinforge gcode")
absoluteFilePathUntilDot = archive.getUntilDot(archive.getCraftPluginsDirectoryPath("preface.py"))
dateTodayString = date.today().isoformat().replace("-", ".")[2:]
if (
absoluteFilePathUntilDot
== "/home/enrique/Desktop/backup/babbleold/script/reprap/fabmetheus/skeinforge_application/skeinforge_plugins/craft_plugins/preface"
): # is this script on Enrique's computer?
archive.writeFileText(archive.getVersionFileName(), dateTodayString)
versionText = archive.getFileText(archive.getVersionFileName())
self.distanceFeedRate.addTagBracketedLine("version", versionText)
dateTimeTuple = datetime.now().timetuple()
created = dateTodayString + "|%s:%s" % (dateTimeTuple[3], dateTimeTuple[4])
self.distanceFeedRate.addTagBracketedLine("created", created)
self.distanceFeedRate.addLine("(<extruderInitialization>)")
if self.repository.setPositioningToAbsolute.value:
self.distanceFeedRate.addLine("G90 ;set positioning to absolute") # Set positioning to absolute.
if self.repository.setUnitsToMillimeters.value:
self.distanceFeedRate.addLine("G21 ;set units to millimeters") # Set units to millimeters.
if self.repository.startAtHome.value:
self.distanceFeedRate.addLine("G28 ;start at home") # Start at home.
if self.repository.turnExtruderOffAtStartUp.value:
self.distanceFeedRate.addLine("M103") # Turn extruder off.
craftTypeName = skeinforge_profile.getCraftTypeName()
self.distanceFeedRate.addTagBracketedLine("craftTypeName", craftTypeName)
self.distanceFeedRate.addTagBracketedLine("decimalPlacesCarried", self.distanceFeedRate.decimalPlacesCarried)
layerHeight = float(self.svgReader.sliceDictionary["layerHeight"])
self.distanceFeedRate.addTagRoundedLine("layerThickness", layerHeight)
self.distanceFeedRate.addTagRoundedLine("layerHeight", layerHeight)
if self.repository.meta.value:
self.distanceFeedRate.addTagBracketedLine("meta", self.repository.meta.value)
edgeWidth = float(self.svgReader.sliceDictionary["edgeWidth"])
self.distanceFeedRate.addTagRoundedLine("edgeWidth", edgeWidth)
self.distanceFeedRate.addTagRoundedLine("perimeterWidth", edgeWidth)
self.distanceFeedRate.addTagBracketedLine("profileName", skeinforge_profile.getProfileName(craftTypeName))
self.distanceFeedRate.addLine("(<settings>)")
pluginFileNames = skeinforge_craft.getPluginFileNames()
for pluginFileName in pluginFileNames:
self.addToolSettingLines(pluginFileName)
self.distanceFeedRate.addLine("(</settings>)")
self.distanceFeedRate.addTagBracketedLine("timeStampPreface", strftime("%Y%m%d_%H%M%S"))
procedureNames = self.svgReader.sliceDictionary["procedureName"].replace(",", " ").split()
for procedureName in procedureNames:
self.distanceFeedRate.addTagBracketedProcedure(procedureName)
self.distanceFeedRate.addTagBracketedProcedure("preface")
self.distanceFeedRate.addLine(
"(</extruderInitialization>)"
) # Initialization is finished, extrusion is starting.
self.distanceFeedRate.addLine("(<crafting>)") # Initialization is finished, crafting is starting.
def addPreface(self, loopLayer):
"Add preface to the carve layer."
self.distanceFeedRate.addLine("(<layer> %s )" % loopLayer.z) # Indicate that a new layer is starting.
for loop in loopLayer.loops:
self.distanceFeedRate.addGcodeFromLoop(loop, loopLayer.z)
self.distanceFeedRate.addLine("(</layer>)")
def addShutdownToOutput(self):
"Add shutdown gcode to the output."
self.distanceFeedRate.addLine("(</crafting>)") # GCode formatted comment
if self.repository.turnExtruderOffAtShutDown.value:
self.distanceFeedRate.addLine("M103") # Turn extruder motor off.
def addToolSettingLines(self, pluginName):
"Add tool setting lines."
preferences = skeinforge_craft.getCraftPreferences(pluginName)
if skeinforge_craft.getCraftValue("Activate %s" % pluginName.capitalize(), preferences) != True:
return
for preference in preferences:
valueWithoutReturn = str(preference.value).replace("\n", " ").replace("\r", " ")
if preference.name != "WindowPosition" and not preference.name.startswith("Open File"):
line = "%s %s %s" % (pluginName, preference.name.replace(" ", "_"), valueWithoutReturn)
self.distanceFeedRate.addTagBracketedLine("setting", line)
def getCraftedGcode(self, repository, gcodeText):
"Parse gcode text and store the bevel gcode."
self.repository = repository
self.svgReader.parseSVG("", gcodeText)
if self.svgReader.sliceDictionary == None:
print(
"Warning, nothing will be done because the sliceDictionary could not be found getCraftedGcode in preface."
)
return ""
self.distanceFeedRate.decimalPlacesCarried = int(self.svgReader.sliceDictionary["decimalPlacesCarried"])
self.addInitializationToOutput()
for loopLayerIndex, loopLayer in enumerate(self.svgReader.loopLayers):
settings.printProgressByNumber(loopLayerIndex, len(self.svgReader.loopLayers), "preface")
self.addPreface(loopLayer)
self.addShutdownToOutput()
return self.distanceFeedRate.output.getvalue()
