def main():
"""
Empyt script template for you to use
"""
# initialize our hardware for use
hc.initialize()
# USE ONE OF THE BELOW LOOPS AS A STARTING POINT
# JUST UNCOMMENT ONE AND DELETE THE OTHERS
#for count in range(10):
#count = 0
#while count < 10:
#count += 1
# change number_of_seconds_to_run_for to the number of seconds you what
# this to run for 60 is 1 minute 3600 is 1 hour
#end_time = time.time() + number_of_seconds_to_run_for
#while time.time() < end_time:
####<PUT ALL YOU CODE IN THIS BLOCK>
# clean up and end
hc.clean_up()
def main():
"""Turn all the lights on for 2 minutes"""
# initialize your hardware for use
hc.initialize()
# turn on all the lights
hc.turn_on_lights()
# run for 2 minutes
end = time.time() + 120
# working loop will run as long as time.time() is less then "end"
while time.time() < end:
# try except block to catch keyboardinterrupt by user to stop
try:
# do nothing, just wait
pass
# if the user pressed <CTRL> + C to exit early break out of the loop
except KeyboardInterrupt:
print "\nstopped"
break
# This ends and cleans up everything
hc.clean_up()
def main():
"""Turn all the lights on for 2 minutes"""
# initialize your hardware for use
hc.initialize()
# turn on all the lights
hc.turn_on_lights()
# run for 2 minutes
end = time.time() + 120
# working loop will run as long as time.time() is less then "end"
while time.time() < end:
# try except block to catch keyboardinterrupt by user to stop
try:
# do nothing, just wait
pass
# if the user pressed <CTRL> + C to exit early break out of the loop
except KeyboardInterrupt:
print "\nstopped"
break
# This ends and cleans up everything
hc.clean_up()
def main():
"""
Play a message
Play a recorded message for the people and go through the lights
one channel at a time in order, then back down to the first
"""
# initialize your hardware for use
hc.initialize()
# start with all the lights off
hc.turn_off_lights()
# Before we start the lights we should start playing the audio
# we have installed mpg123 to make this easy
# if you do not have mpg123 installed then use this command to install it
# sudo apt-get install mpg123
# now all you have to do is use the below command to play an mp3 file
message_file = "/home/pi/lightshowpi/py/examples/message.mp3"
message = subprocess.Popen(["mpg123", "-q", message_file])
# subprocess.Popen will open mpg123 player and play an audio file for you
# and give you a few options that will come in real handy
# you can stop mpg123 before the audio has finished using the instance
# variable we just created by calling message.kill()
# or at any point in the script you can make everything wait for the audio
# to finish playing with message.wait() that could be usefull if you
# ran a short seuqence like in the default preshow and your audio as longer
# then your sequence and you wanted the audio to finish before continuing
# and if you use message.poll() or message.returncode you could find out
# if it has finished, then you might start something else or end everything
# and shutdown your pi.
# working loop
while True:
# try except block to catch keyboardinterrupt by user to stop
try:
hc.turn_on_lights()
except KeyboardInterrupt:
print "\nstopped"
break
# if audio playback has finished break out of the loop
if message.poll() != None:
break
# This ends and cleans up everything
hc.clean_up()
def main():
"""
Play a message
Play a recorded message for the people and go through the lights
one channel at a time in order, then back down to the first
"""
# initialize your hardware for use
hc.initialize()
# start with all the lights off
hc.turn_off_lights()
# Before we start the lights we should start playing the audio
# we have installed mpg123 to make this easy
# if you do not have mpg123 installed then use this command to install it
# sudo apt-get install mpg123
# now all you have to do is use the below command to play an mp3 file
message_file = "/home/pi/lightshowpi/py/examples/message.mp3"
message = subprocess.Popen(["mpg123", "-q", message_file])
# subprocess.Popen will open mpg123 player and play an audio file for you
# and give you a few options that will come in real handy
# you can stop mpg123 before the audio has finished using the instance
# variable we just created by calling message.kill()
# or at any point in the script you can make everything wait for the audio
# to finish playing with message.wait() that could be usefull if you
# ran a short seuqence like in the default preshow and your audio as longer
# then your sequence and you wanted the audio to finish before continuing
# and if you use message.poll() or message.returncode you could find out
# if it has finished, then you might start something else or end everything
# and shutdown your pi.
# working loop
while True:
# try except block to catch keyboardinterrupt by user to stop
try:
hc.turn_on_lights()
except KeyboardInterrupt:
print "\nstopped"
break
# if audio playback has finished break out of the loop
if message.poll() != None:
break
# This ends and cleans up everything
hc.clean_up()
def network_client():
"""Network client support
If in client mode, ignore everything else and just
read data from the network and blink the lights
"""
log.info("Network client mode starting")
print "Network client mode starting..."
print "press CTRL<C> to end"
hc.initialize()
print
try:
channels = network.channels
channel_keys = channels.keys()
while True:
data = network.receive()
if isinstance(data[0], int):
pin = data[0]
if pin in channel_keys:
hc.set_light(channels[pin], True, float(data[1]))
continue
elif isinstance(data[0], np.ndarray):
blevels = data[0]
else:
continue
for pin in channel_keys:
hc.set_light(channels[pin], True, blevels[pin])
except KeyboardInterrupt:
log.info("CTRL<C> pressed, stopping")
print "stopping"
network.close_connection()
hc.clean_up()
def network_client():
"""Network client support
If in client mode, ignore everything else and just
read data from the network and blink the lights
"""
log.info("Network client mode starting")
print "Network client mode starting..."
print "press CTRL<C> to end"
hc.initialize()
print
try:
channels = network.channels
channel_keys = channels.keys()
while True:
data = network.receive()
if isinstance(data[0], int):
pin = data[0]
if pin in channel_keys:
hc.set_light(channels[pin], True, float(data[1]))
continue
elif isinstance(data[0], np.ndarray):
blevels = data[0]
else:
continue
for pin in channel_keys:
hc.set_light(channels[pin], True, blevels[pin])
except KeyboardInterrupt:
log.info("CTRL<C> pressed, stopping")
print "stopping"
network.close_connection()
hc.clean_up()
def start_script(self):
"""Start a seperate script to control the lights"""
return_value = PrePostShow.done
hc.clean_up()
# make a copy of the path
path = list(sys.path)
# insert script location and hardware_controller location into path
sys.path.insert(0, cm.HOME_DIR + "/py")
sys.path.insert(0, os.path.split(self.config)[0])
# create environment for script to run in
environment = os.environ.copy()
environment['PYTHONPATH'] = ':'.join(sys.path)
#run script
show = subprocess.Popen('python ' + self.config,
preexec_fn=os.setsid,
shell=True,
close_fds=True,
env=environment)
# check for user interrupt
while show.poll() is None:
if check_state():
# Skip out on the rest of the show if play now requested!
os.killpg(show.pid, signal.SIGTERM)
return_value = PrePostShow.play_now_interrupt
break
# Check once every ~ .1 seconds to break out
time.sleep(0.1)
# restore path
sys.path[:] = path
# insure clean up just in case the user forgot to do it
hc.clean_up()
return return_value
def main():
"""
Test pattern2
Unlights one channel at a time in order
"""
# this is a list of all the channels you have access to
lights = hc._GPIO_PINS
# initialize your hardware for use
hc.initialize()
# start with all the lights off
hc.turn_off_lights()
# pause for 1 second
time.sleep(2)
# working loop
for _ in range(50):
# try except block to catch keyboardinterrupt by user to stop
try:
# here we just loop over the gpio pins and do something with them
for light in lights:
# turn on all the lights
hc.turn_on_lights()
# then turn off one
hc.turn_off_light(light)
# wait a little bit before the for loop
# starts again and turns off the next light
time.sleep(.4)
# if the user pressed <CTRL> + C to exit early break out of the loop
except KeyboardInterrupt:
print "\nstopped"
break
# This ends and cleans up everything
hc.clean_up()
def start_script(self):
"""Start a seperate script to control the lights"""
return_value = PrePostShow.done
hc.clean_up()
# make a copy of the path
path = list(sys.path)
# insert script location and hardware_controller location into path
sys.path.insert(0, cm.HOME_DIR + "/py")
sys.path.insert(0, os.path.split(self.config)[0])
# create environment for script to run in
environment = os.environ.copy()
environment["PYTHONPATH"] = ":".join(sys.path)
# run script
show = subprocess.Popen(
"python " + self.config, preexec_fn=os.setsid, shell=True, close_fds=True, env=environment
)
# check for user interrupt
while show.poll() is None:
if check_state():
# Skip out on the rest of the show if play now requested!
os.killpg(show.pid, signal.SIGTERM)
return_value = PrePostShow.play_now_interrupt
break
# Check once every ~ .1 seconds to break out
time.sleep(0.1)
# restore path
sys.path[:] = path
# insure clean up just in case the user forgot to do it
hc.clean_up()
return return_value
def end_early():
"""atexit function"""
if server:
network.set_playing()
network.broadcast([0. for _ in range(hc.GPIOLEN)])
time.sleep(1)
network.unset_playing()
hc.clean_up()
if cm.audio_processing.fm:
fm_process.kill()
if network.network_stream:
network.close_connection()
if cm.lightshow.mode == 'stream-in':
try:
streaming.stdin.write("q")
except:
pass
os.kill(streaming.pid, signal.SIGINT)
os.unlink(cm.lightshow.fifo)
def end_early():
"""atexit function"""
if server:
network.set_playing()
network.broadcast([0. for _ in range(hc.GPIOLEN)])
time.sleep(1)
network.unset_playing()
hc.clean_up()
if cm.audio_processing.fm:
fm_process.kill()
if network.network_stream:
network.close_connection()
if cm.lightshow.mode == 'stream-in':
try:
streaming.stdin.write("q")
except:
pass
os.kill(streaming.pid, signal.SIGINT)
os.unlink(cm.lightshow.fifo)
def play_song():
'''Play the next song from the play list (or --file argument).'''
song_to_play = int(cm.get_state('song_to_play', 0))
play_now = int(cm.get_state('play_now', 0))
# Arguments
parser = argparse.ArgumentParser()
filegroup = parser.add_mutually_exclusive_group()
filegroup.add_argument('--playlist', default=_PLAYLIST_PATH,
help='Playlist to choose song from.')
filegroup.add_argument('--file', help='path to the song to play (required if no'
'playlist is designated)')
parser.add_argument('--readcache', type=int, default=1,
help='read light timing from cache if available. Default: true')
args = parser.parse_args()
# Make sure one of --playlist or --file was specified
if args.file == None and args.playlist == None:
print "One of --playlist or --file must be specified"
sys.exit()
# Initialize Lights
hc.initialize()
# Handle the pre-show
if not play_now:
result = Preshow().execute()
if result == Preshow.PlayNowInterrupt:
play_now = True
# Determine the next file to play
song_filename = args.file
if args.playlist != None and args.file == None:
most_votes = [None, None, []]
current_song = None
with open(args.playlist, 'rb') as playlist_fp:
fcntl.lockf(playlist_fp, fcntl.LOCK_SH)
playlist = csv.reader(playlist_fp, delimiter='\t')
songs = []
for song in playlist:
if len(song) < 2 or len(song) > 4:
logging.error('Invalid playlist. Each line should be in the form: '
'<song name><tab><path to song>')
sys.exit()
elif len(song) == 2:
song.append(set())
else:
song[2] = set(song[2].split(','))
if len(song) == 3 and len(song[2]) >= len(most_votes[2]):
most_votes = song
songs.append(song)
fcntl.lockf(playlist_fp, fcntl.LOCK_UN)
if most_votes[0] != None:
logging.info("Most Votes: " + str(most_votes))
current_song = most_votes
# Update playlist with latest votes
with open(args.playlist, 'wb') as playlist_fp:
fcntl.lockf(playlist_fp, fcntl.LOCK_EX)
writer = csv.writer(playlist_fp, delimiter='\t')
for song in songs:
if current_song == song and len(song) == 3:
song.append("playing!")
if len(song[2]) > 0:
song[2] = ",".join(song[2])
else:
del song[2]
writer.writerows(songs)
fcntl.lockf(playlist_fp, fcntl.LOCK_UN)
else:
# Get a "play now" requested song
if play_now > 0 and play_now <= len(songs):
current_song = songs[play_now - 1]
# Get random song
elif _RANDOMIZE_PLAYLIST:
current_song = songs[random.randint(0, len(songs) - 1)]
# Play next song in the lineup
else:
song_to_play = song_to_play if (song_to_play <= len(songs) - 1) else 0
current_song = songs[song_to_play]
next_song = (song_to_play + 1) if ((song_to_play + 1) <= len(songs) - 1) else 0
cm.update_state('song_to_play', next_song)
# Get filename to play and store the current song playing in state cfg
song_filename = current_song[1]
cm.update_state('current_song', songs.index(current_song))
song_filename = song_filename.replace("$SYNCHRONIZED_LIGHTS_HOME", cm.HOME_DIR)
# Ensure play_now is reset before beginning playback
if play_now:
cm.update_state('play_now', 0)
play_now = 0
# Initialize FFT stats
matrix = [0 for _ in range(hc.GPIOLEN)]
# Set up audio
if song_filename.endswith('.wav'):
musicfile = wave.open(song_filename, 'r')
else:
musicfile = decoder.open(song_filename)
sample_rate = musicfile.getframerate()
num_channels = musicfile.getnchannels()
if _usefm=='true':
logging.info("Sending output as fm transmission")
with open(os.devnull, "w") as dev_null:
fm_process = subprocess.Popen(["sudo",cm.HOME_DIR + "/bin/pifm","-",str(frequency),"44100", "stereo" if play_stereo else "mono"], stdin=music_pipe_r, stdout=dev_null)
else:
output = aa.PCM(aa.PCM_PLAYBACK, aa.PCM_NORMAL)
output.setchannels(num_channels)
output.setrate(sample_rate)
output.setformat(aa.PCM_FORMAT_S16_LE)
output.setperiodsize(CHUNK_SIZE)
logging.info("Playing: " + song_filename + " (" + str(musicfile.getnframes() / sample_rate)
+ " sec)")
# Output a bit about what we're about to play to the logs
song_filename = os.path.abspath(song_filename)
cache = []
cache_found = False
cache_filename = os.path.dirname(song_filename) + "/." + os.path.basename(song_filename) \
+ ".sync.gz"
# The values 12 and 1.5 are good estimates for first time playing back (i.e. before we have
# the actual mean and standard deviations calculated for each channel).
mean = [12.0 for _ in range(hc.GPIOLEN)]
std = [1.5 for _ in range(hc.GPIOLEN)]
if args.readcache:
# Read in cached fft
try:
with gzip.open(cache_filename, 'rb') as playlist_fp:
cachefile = csv.reader(playlist_fp, delimiter=',')
for row in cachefile:
cache.append([0.0 if np.isinf(float(item)) else float(item) for item in row])
cache_found = True
# TODO(todd): Optimize this and / or cache it to avoid delay here
cache_matrix = np.array(cache)
for i in range(0, hc.GPIOLEN):
std[i] = np.std([item for item in cache_matrix[:, i] if item > 0])
mean[i] = np.mean([item for item in cache_matrix[:, i] if item > 0])
logging.debug("std: " + str(std) + ", mean: " + str(mean))
except IOError:
logging.warn("Cached sync data song_filename not found: '" + cache_filename
+ ". One will be generated.")
# Process audio song_filename
row = 0
data = musicfile.readframes(CHUNK_SIZE)
frequency_limits = calculate_channel_frequency(_MIN_FREQUENCY,
_MAX_FREQUENCY,
_CUSTOM_CHANNEL_MAPPING,
_CUSTOM_CHANNEL_FREQUENCIES)
while data != '' and not play_now:
if _usefm=='true':
os.write(music_pipe_w, data)
else:
output.write(data)
# Control lights with cached timing values if they exist
matrix = None
if cache_found and args.readcache:
if row < len(cache):
matrix = cache[row]
else:
logging.warning("Ran out of cached FFT values, will update the cache.")
cache_found = False
if matrix == None:
# No cache - Compute FFT in this chunk, and cache results
matrix = fft.calculate_levels(data, CHUNK_SIZE, sample_rate, frequency_limits)
cache.append(matrix)
update_lights(matrix, mean, std)
# Read next chunk of data from music song_filename
data = musicfile.readframes(CHUNK_SIZE)
row = row + 1
# Load new application state in case we've been interrupted
cm.load_state()
play_now = int(cm.get_state('play_now', 0))
if not cache_found:
with gzip.open(cache_filename, 'wb') as playlist_fp:
writer = csv.writer(playlist_fp, delimiter=',')
writer.writerows(cache)
logging.info("Cached sync data written to '." + cache_filename
+ "' [" + str(len(cache)) + " rows]")
# Cleanup the pifm process
if _usefm=='true':
fm_process.kill()
# We're done, turn it all off and clean up things ;)
hc.clean_up()
def audio_in():
'''Control the lightshow from audio coming in from a USB audio card'''
sample_rate = cm.lightshow()['audio_in_sample_rate']
input_channels = cm.lightshow()['audio_in_channels']
# Open the input stream from default input device
stream = aa.PCM(aa.PCM_CAPTURE, aa.PCM_NORMAL, cm.lightshow()['audio_in_card'])
stream.setchannels(input_channels)
stream.setformat(aa.PCM_FORMAT_S16_LE) # Expose in config if needed
stream.setrate(sample_rate)
stream.setperiodsize(CHUNK_SIZE)
logging.debug("Running in audio-in mode - will run until Ctrl+C is pressed")
print "Running in audio-in mode, use Ctrl+C to stop"
try:
hc.initialize()
frequency_limits = calculate_channel_frequency(_MIN_FREQUENCY,
_MAX_FREQUENCY,
_CUSTOM_CHANNEL_MAPPING,
_CUSTOM_CHANNEL_FREQUENCIES)
# Start with these as our initial guesses - will calculate a rolling mean / std
# as we get input data.
mean = [12.0 for _ in range(hc.GPIOLEN)]
std = [0.5 for _ in range(hc.GPIOLEN)]
recent_samples = np.empty((250, hc.GPIOLEN))
num_samples = 0
# Listen on the audio input device until CTRL-C is pressed
while True:
l, data = stream.read()
if l:
try:
matrix = fft.calculate_levels(data, CHUNK_SIZE, sample_rate, frequency_limits, input_channels)
if not np.isfinite(np.sum(matrix)):
# Bad data --- skip it
continue
except ValueError as e:
# TODO(todd): This is most likely occuring due to extra time in calculating
# mean/std every 250 samples which causes more to be read than expected the
# next time around. Would be good to update mean/std in separate thread to
# avoid this --- but for now, skip it when we run into this error is good
# enough ;)
logging.debug("skipping update: " + str(e))
continue
update_lights(matrix, mean, std)
# Keep track of the last N samples to compute a running std / mean
#
# TODO(todd): Look into using this algorithm to compute this on a per sample basis:
# http://www.johndcook.com/blog/standard_deviation/
if num_samples >= 250:
no_connection_ct = 0
for i in range(0, hc.GPIOLEN):
mean[i] = np.mean([item for item in recent_samples[:, i] if item > 0])
std[i] = np.std([item for item in recent_samples[:, i] if item > 0])
# Count how many channels are below 10, if more than 1/2, assume noise (no connection)
if mean[i] < 10.0:
no_connection_ct += 1
# If more than 1/2 of the channels appear to be not connected, turn all off
if no_connection_ct > hc.GPIOLEN / 2:
logging.debug("no input detected, turning all lights off")
mean = [20 for _ in range(hc.GPIOLEN)]
else:
logging.debug("std: " + str(std) + ", mean: " + str(mean))
num_samples = 0
else:
for i in range(0, hc.GPIOLEN):
recent_samples[num_samples][i] = matrix[i]
num_samples += 1
except KeyboardInterrupt:
pass
finally:
print "\nStopping"
hc.clean_up()
def main():
'''main'''
song_to_play = int(cm.get_state('song_to_play', 0))
play_now = int(cm.get_state('play_now', 0))
# Arguments
parser = argparse.ArgumentParser()
filegroup = parser.add_mutually_exclusive_group()
filegroup.add_argument('--playlist', default=_PLAYLIST_PATH,
help='Playlist to choose song from.')
filegroup.add_argument('--file', help='path to the song to play (required if no'
'playlist is designated)')
parser.add_argument('--readcache', type=int, default=1,
help='read light timing from cache if available. Default: true')
args = parser.parse_args()
# Log everything to our log file
# TODO(todd): Add logging configuration options.
logging.basicConfig(filename=cm.LOG_DIR + '/music_and_lights.play.dbg',
format='[%(asctime)s] %(levelname)s {%(pathname)s:%(lineno)d}'
' - %(message)s',
level=logging.DEBUG)
# Make sure one of --playlist or --file was specified
if args.file == None and args.playlist == None:
print "One of --playlist or --file must be specified"
sys.exit()
# Initialize Lights
hc.initialize()
# Only execute preshow if no specific song has been requested to be played right now
if not play_now:
execute_preshow(cm.lightshow()['preshow'])
# Determine the next file to play
song_filename = args.file
if args.playlist != None and args.file == None:
most_votes = [None, None, []]
current_song = None
with open(args.playlist, 'rb') as playlist_fp:
fcntl.lockf(playlist_fp, fcntl.LOCK_SH)
playlist = csv.reader(playlist_fp, delimiter='\t')
songs = []
for song in playlist:
if len(song) < 2 or len(song) > 4:
logging.error('Invalid playlist. Each line should be in the form: '
'<song name><tab><path to song>')
sys.exit()
elif len(song) == 2:
song.append(set())
else:
song[2] = set(song[2].split(','))
if len(song) == 3 and len(song[2]) >= len(most_votes[2]):
most_votes = song
songs.append(song)
fcntl.lockf(playlist_fp, fcntl.LOCK_UN)
if most_votes[0] != None:
logging.info("Most Votes: " + str(most_votes))
current_song = most_votes
# Update playlist with latest votes
with open(args.playlist, 'wb') as playlist_fp:
fcntl.lockf(playlist_fp, fcntl.LOCK_EX)
writer = csv.writer(playlist_fp, delimiter='\t')
for song in songs:
if current_song == song and len(song) == 3:
song.append("playing!")
if len(song[2]) > 0:
song[2] = ",".join(song[2])
else:
del song[2]
writer.writerows(songs)
fcntl.lockf(playlist_fp, fcntl.LOCK_UN)
else:
# Get random song
if _RANDOMIZE_PLAYLIST:
current_song = songs[random.randint(0, len(songs) - 1)]
# Get a "play now" requested song
elif play_now > 0 and play_now <= len(songs):
current_song = songs[play_now - 1]
# Play next song in the lineup
else:
song_to_play = song_to_play if (song_to_play <= len(songs) - 1) else 0
current_song = songs[song_to_play]
next_song = (song_to_play + 1) if ((song_to_play + 1) <= len(songs) - 1) else 0
cm.update_state('song_to_play', next_song)
# Get filename to play and store the current song playing in state cfg
song_filename = current_song[1]
cm.update_state('current_song', songs.index(current_song))
song_filename = song_filename.replace("$SYNCHRONIZED_LIGHTS_HOME", cm.HOME_DIR)
# Ensure play_now is reset before beginning playback
if play_now:
cm.update_state('play_now', 0)
play_now = 0
# Initialize FFT stats
matrix = [0 for _ in range(hc.GPIOLEN)]
offct = [0 for _ in range(hc.GPIOLEN)]
# Build the limit list
if len(_LIMIT_LIST) == 1:
limit = [_LIMIT_LIST[0] for _ in range(hc.GPIOLEN)]
else:
limit = _LIMIT_LIST
# Set up audio
if song_filename.endswith('.wav'):
musicfile = wave.open(song_filename, 'r')
else:
musicfile = decoder.open(song_filename)
sample_rate = musicfile.getframerate()
num_channels = musicfile.getnchannels()
output = aa.PCM(aa.PCM_PLAYBACK, aa.PCM_NORMAL)
output.setchannels(num_channels)
output.setrate(sample_rate)
output.setformat(aa.PCM_FORMAT_S16_LE)
output.setperiodsize(CHUNK_SIZE)
# Output a bit about what we're about to play
song_filename = os.path.abspath(song_filename)
logging.info("Playing: " + song_filename + " (" + str(musicfile.getnframes() / sample_rate)
+ " sec)")
cache = []
cache_found = False
cache_filename = os.path.dirname(song_filename) + "/." + os.path.basename(song_filename) \
+ ".sync.gz"
# The values 12 and 1.5 are good estimates for first time playing back (i.e. before we have
# the actual mean and standard deviations calculated for each channel).
mean = [12.0 for _ in range(hc.GPIOLEN)]
std = [1.5 for _ in range(hc.GPIOLEN)]
if args.readcache:
# Read in cached fft
try:
with gzip.open(cache_filename, 'rb') as playlist_fp:
cachefile = csv.reader(playlist_fp, delimiter=',')
for row in cachefile:
cache.append([0.0 if np.isinf(float(item)) else float(item) for item in row])
cache_found = True
# TODO(todd): Optimize this and / or cache it to avoid delay here
cache_matrix = np.array(cache)
for i in range(0, hc.GPIOLEN):
std[i] = np.std([item for item in cache_matrix[:, i] if item > 0])
mean[i] = np.mean([item for item in cache_matrix[:, i] if item > 0])
logging.debug("std: " + str(std) + ", mean: " + str(mean))
except IOError:
logging.warn("Cached sync data song_filename not found: '" + cache_filename
+ ". One will be generated.")
# Process audio song_filename
row = 0
data = musicfile.readframes(CHUNK_SIZE)
frequency_limits = calculate_channel_frequency(_MIN_FREQUENCY,
_MAX_FREQUENCY,
_CUSTOM_CHANNEL_MAPPING,
_CUSTOM_CHANNEL_FREQUENCIES)
while data != '' and not play_now:
output.write(data)
# Control lights with cached timing values if they exist
matrix = None
if cache_found and args.readcache:
if row < len(cache):
matrix = cache[row]
else:
logging.warning("Ran out of cached FFT values, will update the cache.")
cache_found = False
if matrix == None:
# No cache - Compute FFT in this chunk, and cache results
matrix = calculate_levels(data, sample_rate, frequency_limits)
cache.append(matrix)
# blank out the display
led.fill(Color(0,0,0),0,151)
for i in range(0, hc.GPIOLEN):
if hc.is_pin_pwm(i):
# Output pwm, where off is at 0.5 std below the mean
# and full on is at 0.75 std above the mean.
display_column(i,matrix[i])
#brightness = matrix[i] - mean[i] + 0.5 * std[i]
#brightness = brightness / (1.25 * std[i])
#if brightness > 1.0:
#brightness = 1.0
#if brightness < 0:
#brightness = 0
#hc.turn_on_light(i, True, int(brightness * 60))
else:
if limit[i] < matrix[i] * _LIMIT_THRESHOLD:
limit[i] = limit[i] * _LIMIT_THRESHOLD_INCREASE
logging.debug("++++ channel: {0}; limit: {1:.3f}".format(i, limit[i]))
# Amplitude has reached threshold
if matrix[i] > limit[i]:
hc.turn_on_light(i, True)
offct[i] = 0
else: # Amplitude did not reach threshold
offct[i] = offct[i] + 1
if offct[i] > _MAX_OFF_CYCLES:
offct[i] = 0
limit[i] = limit[i] * _LIMIT_THRESHOLD_DECREASE # old value 0.8
logging.debug("---- channel: {0}; limit: {1:.3f}".format(i, limit[i]))
hc.turn_off_light(i, True)
# send out data to RGB LED Strip
led.update()
# Read next chunk of data from music song_filename
data = musicfile.readframes(CHUNK_SIZE)
row = row + 1
# Load new application state in case we've been interrupted
cm.load_state()
play_now = int(cm.get_state('play_now', 0))
if not cache_found:
with gzip.open(cache_filename, 'wb') as playlist_fp:
writer = csv.writer(playlist_fp, delimiter=',')
writer.writerows(cache)
logging.info("Cached sync data written to '." + cache_filename
+ "' [" + str(len(cache)) + " rows]")
# We're done, turn it all off ;)
hc.clean_up()
def main():
"""
Random flashing lights
"""
# this is a list of all the channels you have access to
# I'm also tracking the time here so that I know when I turned a light off
# So I'm putting everything in a dict
gpio_pins = hc._GPIO_PINS
lights = dict.fromkeys(range(0, len(gpio_pins)), [True, time.time()])
# get a number that is about 40% the length of your gpio's
# this will be use to make sure that no more then 40% of
# the light will be off at any one time
max_off = int(round(len(lights) * .4))
# initialize your hardware for use
hc.initialize()
print "Press <CTRL>-C to stop"
# start with all the lights on
hc.turn_on_lights()
# lets run for 2 minutes
end = time.time() + 120
# working loop will run as long as time.time() is less then "end"
while time.time() < end:
# try except block to catch keyboardinterrupt by user to stop
try:
# here we just loop over the gpio pins
for light in lights:
# this is where we check to see if we have any light
# that are turned off
# if they are off we will check the time to see if we
# want to turn them back on yet, if we do then turn it on
if not lights[light][0]:
if lights[light][1] < time.time():
lights[light][0] = True
hc.turn_on_light(light)
# count the number of lights that are off
off = [k for (k, v) in lights.iteritems() if v.count(1) == False]
# if less then out max count of light that we chose
# we can turn one off
if len(off) < max_off:
# pick a light at random to turn off
choice = random.randrange(0, len(gpio_pins))
# if it's on then lets turn it off
if lights[choice][0]:
# pick a duration for that light to be off
# default times are between 1/2 and secong and 1.8 seconds
duration = random.uniform(0.5, 1.8)
# store this informatin in our dict
lights[choice] = [False, time.time() + duration]
# and turn that light off then continue with the main loop
# and do it all over again
hc.turn_off_light(choice)
# if the user pressed <CTRL> + C to exit early break out of the loop
except KeyboardInterrupt:
print "\nstopped"
break
# This ends and cleans up everything
hc.clean_up()
def cleanup():
global initialized
clean_up()
initialized = False
def audio_in():
"""Control the lightshow from audio coming in from a USB audio card"""
sample_rate = cm.lightshow()['audio_in_sample_rate']
input_channels = cm.lightshow()['audio_in_channels']
# Open the input stream from default input device
audio_in_card = cm.lightshow()['audio_in_card']
stream = aa.PCM(aa.PCM_CAPTURE, aa.PCM_NORMAL, audio_in_card)
stream.setchannels(input_channels)
stream.setformat(aa.PCM_FORMAT_S16_LE) # Expose in config if needed
stream.setrate(sample_rate)
stream.setperiodsize(CHUNK_SIZE)
logging.debug("Running in audio-in mode - will run until Ctrl+C "
"is pressed")
print "Running in audio-in mode, use Ctrl+C to stop"
# Start with these as our initial guesses - will calculate a rolling
# mean / std as we get input data.
mean = np.array([12.0] * hc.GPIOLEN, dtype='float64')
std = np.array([1.5] * hc.GPIOLEN, dtype='float64')
count = 2
running_stats = running_stats.Stats(hc.GPIOLEN)
# preload running_stats to avoid errors, and give us a show that looks
# good right from the start
running_stats.preload(mean, std, count)
try:
hc.initialize()
fft_calc = fft.FFT(CHUNK_SIZE, sample_rate, hc.GPIOLEN, _MIN_FREQUENCY,
_MAX_FREQUENCY, _CUSTOM_CHANNEL_MAPPING,
_CUSTOM_CHANNEL_FREQUENCIES, input_channels)
# Listen on the audio input device until CTRL-C is pressed
while True:
length, data = stream.read()
if length > 0:
# if the maximum of the absolute value of all samples in
# data is below a threshold we will disreguard it
audio_max = audioop.max(data, 2)
if audio_max < 250:
# we will fill the matrix with zeros and turn the
# lights off
matrix = np.zeros(hc.GPIOLEN, dtype="float64")
logging.debug("below threshold: '" + str(audio_max) +
"', turning the lights off")
else:
matrix = fft_calc.calculate_levels(data)
running_stats.push(matrix)
mean = running_stats.mean()
std = running_stats.std()
update_lights(matrix, mean, std)
except KeyboardInterrupt:
pass
finally:
print "\nStopping"
hc.clean_up()
def audio_in():
"""Control the lightshow from audio coming in from a USB audio card"""
sample_rate = cm.lightshow()['audio_in_sample_rate']
input_channels = cm.lightshow()['audio_in_channels']
# Open the input stream from default input device
audio_in_card = cm.lightshow()['audio_in_card']
stream = aa.PCM(aa.PCM_CAPTURE, aa.PCM_NORMAL, audio_in_card)
stream.setchannels(input_channels)
stream.setformat(aa.PCM_FORMAT_S16_LE) # Expose in config if needed
stream.setrate(sample_rate)
stream.setperiodsize(CHUNK_SIZE)
logging.debug("Running in audio-in mode - will run until Ctrl+C "
"is pressed")
print "Running in audio-in mode, use Ctrl+C to stop"
# Start with these as our initial guesses - will calculate a rolling
# mean / std as we get input data.
mean = np.array([12.0] * hc.GPIOLEN, dtype='float64')
std = np.array([1.5] * hc.GPIOLEN, dtype='float64')
count = 2
running_stats = running_stats.Stats(hc.GPIOLEN)
# preload running_stats to avoid errors, and give us a show that looks
# good right from the start
running_stats.preload(mean, std, count)
try:
hc.initialize()
fft_calc = fft.FFT(CHUNK_SIZE,
sample_rate,
hc.GPIOLEN,
_MIN_FREQUENCY,
_MAX_FREQUENCY,
_CUSTOM_CHANNEL_MAPPING,
_CUSTOM_CHANNEL_FREQUENCIES,
input_channels)
# Listen on the audio input device until CTRL-C is pressed
while True:
length, data = stream.read()
if length > 0:
# if the maximum of the absolute value of all samples in
# data is below a threshold we will disreguard it
audio_max = audioop.max(data, 2)
if audio_max < 250:
# we will fill the matrix with zeros and turn the
# lights off
matrix = np.zeros(hc.GPIOLEN, dtype="float64")
logging.debug("below threshold: '" + str(
audio_max) + "', turning the lights off")
else:
matrix = fft_calc.calculate_levels(data)
running_stats.push(matrix)
mean = running_stats.mean()
std = running_stats.std()
update_lights(matrix, mean, std)
except KeyboardInterrupt:
pass
finally:
print "\nStopping"
hc.clean_up()
def main():
"""
ladder
Lights one channel at a time in order
Then backs down to the first
Then repeat everything 20 times
"""
# this is a list of all the channels you have access to
lights = hc._GPIO_PINS
# initialize your hardware for use
hc.initialize()
# start with all the lights off
hc.turn_off_lights()
# pause for 1 second
time.sleep(1)
# working loop
for _ in range(20):
# try except block to catch keyboardinterrupt by user to stop
try:
# here we just loop over the gpio pins and do something with them
# except the last one
for light in range(len(lights) - 1):
# turn off all the lights
hc.turn_off_lights()
# then turn on one
hc.turn_on_light(lights[light])
# wait a little bit
time.sleep(.04)
# to make the transition back smoother we handle the last pin here
hc.turn_off_lights()
hc.turn_on_light(lights[light + 1])
# this loop walks it back the other way
for light in range(len(lights) - 1, 0, -1):
# turn off all the lights
hc.turn_off_lights()
# then turn on one
hc.turn_on_light(lights[light])
# wait a little bit
time.sleep(.04)
# again to make it smoother handle the first pin like the last pin
hc.turn_off_lights()
hc.turn_on_light(lights[light - 1])
# if the user pressed <CTRL> + C to exit early break out of the loop
except KeyboardInterrupt:
print "\nstopped"
break
# This ends and cleans up everything
hc.clean_up()
def end_early():
hc.clean_up()
def audio_in():
"""Control the lightshow from audio coming in from a USB audio card"""
sample_rate = cm.lightshow()['audio_in_sample_rate']
input_channels = cm.lightshow()['audio_in_channels']
# Open the input stream from default input device
stream = aa.PCM(aa.PCM_CAPTURE, aa.PCM_NORMAL,
cm.lightshow()['audio_in_card'])
stream.setchannels(input_channels)
stream.setformat(aa.PCM_FORMAT_S16_LE) # Expose in config if needed
stream.setrate(sample_rate)
stream.setperiodsize(CHUNK_SIZE)
logging.debug(
"Running in audio-in mode - will run until Ctrl+C is pressed")
print "Running in audio-in mode, use Ctrl+C to stop"
try:
hc.initialize()
frequency_limits = calculate_channel_frequency(
_MIN_FREQUENCY, _MAX_FREQUENCY, _CUSTOM_CHANNEL_MAPPING,
_CUSTOM_CHANNEL_FREQUENCIES)
# Start with these as our initial guesses - will calculate a rolling mean / std
# as we get input data.
mean = [12.0 for _ in range(hc.GPIOLEN)]
std = [0.5 for _ in range(hc.GPIOLEN)]
recent_samples = np.empty((250, hc.GPIOLEN))
num_samples = 0
# Listen on the audio input device until CTRL-C is pressed
while True:
l, data = stream.read()
if l:
try:
matrix = fft.calculate_levels(data, CHUNK_SIZE,
sample_rate,
frequency_limits, hc.GPIOLEN,
input_channels)
if not np.isfinite(np.sum(matrix)):
# Bad data --- skip it
continue
except ValueError as e:
# TODO(todd): This is most likely occuring due to extra time in calculating
# mean/std every 250 samples which causes more to be read than expected the
# next time around. Would be good to update mean/std in separate thread to
# avoid this --- but for now, skip it when we run into this error is good
# enough ;)
logging.debug("skipping update: " + str(e))
continue
update_lights(matrix, mean, std)
# Keep track of the last N samples to compute a running std / mean
#
# TODO(todd): Look into using this algorithm to compute this on a per sample basis:
# http://www.johndcook.com/blog/standard_deviation/
if num_samples >= 250:
no_connection_ct = 0
for i in range(0, hc.GPIOLEN):
mean[i] = np.mean([
item for item in recent_samples[:, i] if item > 0
])
std[i] = np.std([
item for item in recent_samples[:, i] if item > 0
])
# Count how many channels are below 10,
# if more than 1/2, assume noise (no connection)
if mean[i] < 10.0:
no_connection_ct += 1
# If more than 1/2 of the channels appear to be not connected, turn all off
if no_connection_ct > hc.GPIOLEN / 2:
logging.debug(
"no input detected, turning all lights off")
mean = [20 for _ in range(hc.GPIOLEN)]
else:
logging.debug("std: " + str(std) + ", mean: " +
str(mean))
num_samples = 0
else:
for i in range(0, hc.GPIOLEN):
recent_samples[num_samples][i] = matrix[i]
num_samples += 1
except KeyboardInterrupt:
pass
finally:
print "\nStopping"
hc.clean_up()
def play_song():
"""Play the next song from the play list (or --file argument)."""
song_to_play = int(cm.get_state('song_to_play', 0))
play_now = int(cm.get_state('play_now', 0))
# Arguments
parser = argparse.ArgumentParser()
filegroup = parser.add_mutually_exclusive_group()
filegroup.add_argument('--playlist',
default=_PLAYLIST_PATH,
help='Playlist to choose song from.')
filegroup.add_argument('--file',
help='path to the song to play (required if no'
'playlist is designated)')
parser.add_argument(
'--readcache',
type=int,
default=1,
help='read light timing from cache if available. Default: true')
args = parser.parse_args()
# Make sure one of --playlist or --file was specified
if args.file == None and args.playlist == None:
print "One of --playlist or --file must be specified"
sys.exit()
# Handle the pre/post show
if not play_now:
result = PrePostShow('preshow').execute()
# now unused. if play_now = True
# song to play is always the first song in the playlist
if result == PrePostShow.play_now_interrupt:
play_now = int(cm.get_state('play_now', 0))
# Initialize Lights
hc.initialize()
# Determine the next file to play
song_filename = args.file
if args.playlist != None and args.file == None:
most_votes = [None, None, []]
current_song = None
with open(args.playlist, 'rb') as playlist_fp:
fcntl.lockf(playlist_fp, fcntl.LOCK_SH)
playlist = csv.reader(playlist_fp, delimiter='\t')
songs = []
for song in playlist:
if len(song) < 2 or len(song) > 4:
logging.error(
'Invalid playlist. Each line should be in the form: '
'<song name><tab><path to song>')
sys.exit()
elif len(song) == 2:
song.append(set())
else:
song[2] = set(song[2].split(','))
if len(song) == 3 and len(song[2]) >= len(most_votes[2]):
most_votes = song
songs.append(song)
fcntl.lockf(playlist_fp, fcntl.LOCK_UN)
if most_votes[0] != None:
logging.info("Most Votes: " + str(most_votes))
current_song = most_votes
# Update playlist with latest votes
with open(args.playlist, 'wb') as playlist_fp:
fcntl.lockf(playlist_fp, fcntl.LOCK_EX)
writer = csv.writer(playlist_fp, delimiter='\t')
for song in songs:
if current_song == song and len(song) == 3:
song.append("playing!")
if len(song[2]) > 0:
song[2] = ",".join(song[2])
else:
del song[2]
writer.writerows(songs)
fcntl.lockf(playlist_fp, fcntl.LOCK_UN)
else:
# Get a "play now" requested song
if play_now > 0 and play_now <= len(songs):
current_song = songs[play_now - 1]
# Get random song
elif _RANDOMIZE_PLAYLIST:
# Use python's random.randrange() to get a random song
current_song = songs[random.randrange(0, len(songs))]
# Play next song in the lineup
else:
song_to_play = song_to_play if (
song_to_play <= len(songs) - 1) else 0
current_song = songs[song_to_play]
next_song = (song_to_play + 1) if (
(song_to_play + 1) <= len(songs) - 1) else 0
cm.update_state('song_to_play', next_song)
# Get filename to play and store the current song playing in state cfg
song_filename = current_song[1]
cm.update_state('current_song', songs.index(current_song))
song_filename = song_filename.replace("$SYNCHRONIZED_LIGHTS_HOME",
cm.HOME_DIR)
# Ensure play_now is reset before beginning playback
if play_now:
cm.update_state('play_now', 0)
play_now = 0
# Initialize FFT stats
matrix = [0 for _ in range(hc.GPIOLEN)]
# Set up audio
if song_filename.endswith('.wav'):
musicfile = wave.open(song_filename, 'r')
else:
musicfile = decoder.open(song_filename)
sample_rate = musicfile.getframerate()
num_channels = musicfile.getnchannels()
if _usefm == 'true':
logging.info("Sending output as fm transmission")
with open(os.devnull, "w") as dev_null:
# play_stereo is always True as coded, Should it be changed to
# an option in the config file?
fm_process = subprocess.Popen(["sudo",
cm.HOME_DIR + "/bin/pifm",
"-",
str(frequency),
"44100",
"stereo" if play_stereo else "mono"],\
stdin=music_pipe_r,\
stdout=dev_null)
else:
output = aa.PCM(aa.PCM_PLAYBACK, aa.PCM_NORMAL)
output.setchannels(num_channels)
output.setrate(sample_rate)
output.setformat(aa.PCM_FORMAT_S16_LE)
output.setperiodsize(CHUNK_SIZE)
logging.info("Playing: " + song_filename + " (" +
str(musicfile.getnframes() / sample_rate) + " sec)")
# Output a bit about what we're about to play to the logs
song_filename = os.path.abspath(song_filename)
# create empty array for the cache_matrix
cache_matrix = np.empty(shape=[0, hc.GPIOLEN])
cache_found = False
cache_filename = \
os.path.dirname(song_filename) + "/." + os.path.basename(song_filename) + ".sync"
# The values 12 and 1.5 are good estimates for first time playing back
# (i.e. before we have the actual mean and standard deviations
# calculated for each channel).
mean = [12.0 for _ in range(hc.GPIOLEN)]
std = [1.5 for _ in range(hc.GPIOLEN)]
if args.readcache:
# Read in cached fft
try:
# load cache from file using numpy loadtxt
cache_matrix = np.loadtxt(cache_filename)
cache_found = True
# get std from matrix / located at index 0
std = np.array(cache_matrix[0])
# get mean from matrix / located at index 1
mean = np.array(cache_matrix[1])
# delete mean and std from the array
cache_matrix = np.delete(cache_matrix, (0), axis=0)
cache_matrix = np.delete(cache_matrix, (0), axis=0)
logging.debug("std: " + str(std) + ", mean: " + str(mean))
except IOError:
logging.warn("Cached sync data song_filename not found: '" +
cache_filename + ". One will be generated.")
# Process audio song_filename
row = 0
data = musicfile.readframes(CHUNK_SIZE)
frequency_limits = calculate_channel_frequency(
_MIN_FREQUENCY, _MAX_FREQUENCY, _CUSTOM_CHANNEL_MAPPING,
_CUSTOM_CHANNEL_FREQUENCIES)
while data != '' and not play_now:
if _usefm == 'true':
os.write(music_pipe_w, data)
else:
output.write(data)
# Control lights with cached timing values if they exist
matrix = None
if cache_found and args.readcache:
if row < len(cache_matrix):
matrix = cache_matrix[row]
else:
logging.warning(
"Ran out of cached FFT values, will update the cache.")
cache_found = False
if matrix == None:
# No cache - Compute FFT in this chunk, and cache results
matrix = fft.calculate_levels(data, CHUNK_SIZE, sample_rate,
frequency_limits, hc.GPIOLEN)
# Add the matrix to the end of the cache
cache_matrix = np.vstack([cache_matrix, matrix])
update_lights(matrix, mean, std)
# Read next chunk of data from music song_filename
data = musicfile.readframes(CHUNK_SIZE)
row = row + 1
# Load new application state in case we've been interrupted
cm.load_state()
play_now = int(cm.get_state('play_now', 0))
if not cache_found:
# Compute the standard deviation and mean values for the cache
for i in range(0, hc.GPIOLEN):
std[i] = np.std([item for item in cache_matrix[:, i] if item > 0])
mean[i] = np.mean(
[item for item in cache_matrix[:, i] if item > 0])
# Add mean and std to the top of the cache
cache_matrix = np.vstack([mean, cache_matrix])
cache_matrix = np.vstack([std, cache_matrix])
# Save the cache using numpy savetxt
np.savetxt(cache_filename, cache_matrix)
logging.info("Cached sync data written to '." + cache_filename +
"' [" + str(len(cache_matrix)) + " rows]")
# Cleanup the pifm process
if _usefm == 'true':
fm_process.kill()
# check for postshow
done = PrePostShow('postshow').execute()
# We're done, turn it all off and clean up things ;)
hc.clean_up()
def end_early():
"""atexit function"""
if not CLEAN_EXIT:
hc.clean_up()
def play_song():
"""Play the next song from the play list (or --file argument)."""
# get the next song to play
song_filename, config_filename, cache_filename = get_song()
# load custom configuration from file
load_custom_config(config_filename)
# Initialize Lights
network.set_playing()
hc.initialize()
# Handle the pre/post show
play_now = int(cm.get_state('play_now', "0"))
network.unset_playing()
if not play_now:
result = PrePostShow('preshow', hc).execute()
if result == PrePostShow.play_now_interrupt:
play_now = int(cm.get_state('play_now', "0"))
network.set_playing()
# Ensure play_now is reset before beginning playback
if play_now:
cm.update_state('play_now', "0")
play_now = 0
# setup audio file and output device
output, fft_calc, music_file, light_delay = setup_audio(song_filename)
# setup our cache_matrix, std, mean
cache_found, cache_matrix, std, mean = setup_cache(cache_filename,
fft_calc)
matrix_buffer = deque([], 1000)
# Process audio song_filename
row = 0
data = music_file.readframes(CHUNK_SIZE)
while data != '' and not play_now:
# output data to sound device
output(data)
# Control lights with cached timing values if they exist
matrix = None
if cache_found and args.readcache:
if row < len(cache_matrix):
matrix = cache_matrix[row]
else:
log.warning(
"Ran out of cached FFT values, will update the cache.")
cache_found = False
if matrix is None:
# No cache - Compute FFT in this chunk, and cache results
matrix = fft_calc.calculate_levels(data)
# Add the matrix to the end of the cache
cache_matrix = np.vstack([cache_matrix, matrix])
matrix_buffer.appendleft(matrix)
if len(matrix_buffer) > light_delay:
matrix = matrix_buffer[light_delay]
update_lights(matrix, mean, std)
# Read next chunk of data from music song_filename
data = music_file.readframes(CHUNK_SIZE)
row += 1
# Load new application state in case we've been interrupted
cm.load_state()
play_now = int(cm.get_state('play_now', "0"))
if not cache_found and not play_now:
save_cache(cache_matrix, cache_filename, fft_calc)
# Cleanup the pifm process
if cm.audio_processing.fm:
fm_process.kill()
# check for postshow
network.unset_playing()
if not play_now:
PrePostShow('postshow', hc).execute()
# We're done, turn it all off and clean up things ;)
hc.clean_up()
def end_early():
"""atexit function"""
if not CLEAN_EXIT:
hc.clean_up()
def main():
"""
Random flashing lights
"""
# this is a list of all the channels you have access to
# I'm also tracking the time here so that I know when I turned a light off
# So I'm putting everything in a dict
gpio_pins = hc._GPIO_PINS
lights = dict.fromkeys(range(0, len(gpio_pins)), [True, time.time()])
# get a number that is about 40% the length of your gpio's
# this will be use to make sure that no more then 40% of
# the light will be off at any one time
max_off = int(round(len(lights) * .4))
# initialize your hardware for use
hc.initialize()
print "Press <CTRL>-C to stop"
# start with all the lights on
hc.turn_on_lights()
# lets run for 2 minutes
end = time.time() + 120
# working loop will run as long as time.time() is less then "end"
while time.time() < end:
# try except block to catch keyboardinterrupt by user to stop
try:
# here we just loop over the gpio pins
for light in lights:
# this is where we check to see if we have any light
# that are turned off
# if they are off we will check the time to see if we
# want to turn them back on yet, if we do then turn it on
if not lights[light][0]:
if lights[light][1] < time.time():
lights[light][0] = True
hc.turn_on_light(light)
# count the number of lights that are off
off = [k for (k, v) in lights.iteritems() if v.count(1) == False]
# if less then out max count of light that we chose
# we can turn one off
if len(off) < max_off:
# pick a light at random to turn off
choice = random.randrange(0, len(gpio_pins))
# if it's on then lets turn it off
if lights[choice][0]:
# pick a duration for that light to be off
# default times are between 1/2 and secong and 1.8 seconds
duration = random.uniform(0.5, 1.8)
# store this informatin in our dict
lights[choice] = [False, time.time() + duration]
# and turn that light off then continue with the main loop
# and do it all over again
hc.turn_off_light(choice)
# if the user pressed <CTRL> + C to exit early break out of the loop
except KeyboardInterrupt:
print "\nstopped"
break
# This ends and cleans up everything
hc.clean_up()
def main():
"""
PWM example
Start at each end and walk to the other using pwm
"""
# this is a list of all the channels you have access to
lights = hc._GPIO_PINS
# the gpio pins in reversed order
lights2 = lights[::-1]
# get _PWM_MAX from the hc module
# this is the max value for the pwm channels
pwm_max = hc._PWM_MAX
# initialize your hardware for use
hc.initialize()
# start with all the lights off
hc.turn_off_lights()
# pause for 1 second
time.sleep(1)
# working loop, we will do this sequence 10 times then end
for _ in range(10):
# here we just loop over the gpio pins and turn then on and off
# with the pwm feature of lightshowpi
for light in range(int(len(lights) / 2)):
if hc.is_pin_pwm(lights[light]) and hc.is_pin_pwm(lights2[light]):
for brightness in range(0, pwm_max):
# fade in
hc.turn_on_light(lights[light], 0,
float(brightness) / pwm_max)
hc.turn_on_light(lights2[light], 0,
float(brightness) / pwm_max)
time.sleep(.05 / pwm_max)
for brightness in range(pwm_max - 1, -1, -1):
# fade out
hc.turn_on_light(lights[light], 0,
float(brightness) / pwm_max)
hc.turn_on_light(lights2[light], 0,
float(brightness) / pwm_max)
time.sleep(.05 / pwm_max)
for light in range(int(len(lights) / 2) - 1, -1, -1):
if hc.is_pin_pwm(lights[light]) and hc.is_pin_pwm(lights2[light]):
for brightness in range(0, pwm_max):
# fade in
hc.turn_on_light(lights[light], 0,
float(brightness) / pwm_max)
hc.turn_on_light(lights2[light], 0,
float(brightness) / pwm_max)
time.sleep(.05 / pwm_max)
for brightness in range(pwm_max - 1, -1, -1):
# fade out
hc.turn_on_light(lights[light], 0,
float(brightness) / pwm_max)
hc.turn_on_light(lights2[light], 0,
float(brightness) / pwm_max)
time.sleep(.05 / pwm_max)
# This ends and cleans up everything
hc.clean_up()
def main():
'''main'''
song_to_play = int(cm.get_state('song_to_play', 0))
play_now = int(cm.get_state('play_now', 0))
# Arguments
parser = argparse.ArgumentParser()
filegroup = parser.add_mutually_exclusive_group()
filegroup.add_argument('--playlist',
default=_PLAYLIST_PATH,
help='Playlist to choose song from.')
filegroup.add_argument('--file',
help='path to the song to play (required if no'
'playlist is designated)')
parser.add_argument(
'--readcache',
type=int,
default=1,
help='read light timing from cache if available. Default: true')
args = parser.parse_args()
# Log everything to our log file
# TODO(todd): Add logging configuration options.
logging.basicConfig(
filename=cm.LOG_DIR + '/music_and_lights.play.dbg',
format='[%(asctime)s] %(levelname)s {%(pathname)s:%(lineno)d}'
' - %(message)s',
level=logging.DEBUG)
# Make sure one of --playlist or --file was specified
if args.file == None and args.playlist == None:
print "One of --playlist or --file must be specified"
sys.exit()
# Initialize Lights
hc.initialize()
# Only execute preshow if no specific song has been requested to be played right now
if not play_now:
execute_preshow(cm.lightshow()['preshow'])
# Determine the next file to play
song_filename = args.file
if args.playlist != None and args.file == None:
most_votes = [None, None, []]
current_song = None
with open(args.playlist, 'rb') as playlist_fp:
fcntl.lockf(playlist_fp, fcntl.LOCK_SH)
playlist = csv.reader(playlist_fp, delimiter='\t')
songs = []
for song in playlist:
if len(song) < 2 or len(song) > 4:
logging.error(
'Invalid playlist. Each line should be in the form: '
'<song name><tab><path to song>')
sys.exit()
elif len(song) == 2:
song.append(set())
else:
song[2] = set(song[2].split(','))
if len(song) == 3 and len(song[2]) >= len(most_votes[2]):
most_votes = song
songs.append(song)
fcntl.lockf(playlist_fp, fcntl.LOCK_UN)
if most_votes[0] != None:
logging.info("Most Votes: " + str(most_votes))
current_song = most_votes
# Update playlist with latest votes
with open(args.playlist, 'wb') as playlist_fp:
fcntl.lockf(playlist_fp, fcntl.LOCK_EX)
writer = csv.writer(playlist_fp, delimiter='\t')
for song in songs:
if current_song == song and len(song) == 3:
song.append("playing!")
if len(song[2]) > 0:
song[2] = ",".join(song[2])
else:
del song[2]
writer.writerows(songs)
fcntl.lockf(playlist_fp, fcntl.LOCK_UN)
else:
# Get random song
if _RANDOMIZE_PLAYLIST:
current_song = songs[random.randint(0, len(songs) - 1)]
# Get a "play now" requested song
elif play_now > 0 and play_now <= len(songs):
current_song = songs[play_now - 1]
# Play next song in the lineup
else:
song_to_play = song_to_play if (
song_to_play <= len(songs) - 1) else 0
current_song = songs[song_to_play]
next_song = (song_to_play + 1) if (
(song_to_play + 1) <= len(songs) - 1) else 0
cm.update_state('song_to_play', next_song)
# Get filename to play and store the current song playing in state cfg
song_filename = current_song[1]
cm.update_state('current_song', songs.index(current_song))
song_filename = song_filename.replace("$SYNCHRONIZED_LIGHTS_HOME",
cm.HOME_DIR)
# Ensure play_now is reset before beginning playback
if play_now:
cm.update_state('play_now', 0)
play_now = 0
# Initialize FFT stats
matrix = [0 for _ in range(hc.GPIOLEN)]
offct = [0 for _ in range(hc.GPIOLEN)]
# Build the limit list
if len(_LIMIT_LIST) == 1:
limit = [_LIMIT_LIST[0] for _ in range(hc.GPIOLEN)]
else:
limit = _LIMIT_LIST
# Set up audio
if song_filename.endswith('.wav'):
musicfile = wave.open(song_filename, 'r')
else:
musicfile = decoder.open(song_filename)
sample_rate = musicfile.getframerate()
num_channels = musicfile.getnchannels()
output = aa.PCM(aa.PCM_PLAYBACK, aa.PCM_NORMAL)
output.setchannels(num_channels)
output.setrate(sample_rate)
output.setformat(aa.PCM_FORMAT_S16_LE)
output.setperiodsize(CHUNK_SIZE)
# Output a bit about what we're about to play
song_filename = os.path.abspath(song_filename)
logging.info("Playing: " + song_filename + " (" +
str(musicfile.getnframes() / sample_rate) + " sec)")
cache = []
cache_found = False
cache_filename = os.path.dirname(song_filename) + "/." + os.path.basename(song_filename) \
+ ".sync.gz"
# The values 12 and 1.5 are good estimates for first time playing back (i.e. before we have
# the actual mean and standard deviations calculated for each channel).
mean = [12.0 for _ in range(hc.GPIOLEN)]
std = [1.5 for _ in range(hc.GPIOLEN)]
if args.readcache:
# Read in cached fft
try:
with gzip.open(cache_filename, 'rb') as playlist_fp:
cachefile = csv.reader(playlist_fp, delimiter=',')
for row in cachefile:
cache.append([
0.0 if np.isinf(float(item)) else float(item)
for item in row
])
cache_found = True
# TODO(todd): Optimize this and / or cache it to avoid delay here
cache_matrix = np.array(cache)
for i in range(0, hc.GPIOLEN):
std[i] = np.std(
[item for item in cache_matrix[:, i] if item > 0])
mean[i] = np.mean(
[item for item in cache_matrix[:, i] if item > 0])
logging.debug("std: " + str(std) + ", mean: " + str(mean))
except IOError:
logging.warn("Cached sync data song_filename not found: '" +
cache_filename + ". One will be generated.")
# Process audio song_filename
row = 0
data = musicfile.readframes(CHUNK_SIZE)
frequency_limits = calculate_channel_frequency(
_MIN_FREQUENCY, _MAX_FREQUENCY, _CUSTOM_CHANNEL_MAPPING,
_CUSTOM_CHANNEL_FREQUENCIES)
while data != '' and not play_now:
output.write(data)
# Control lights with cached timing values if they exist
matrix = None
if cache_found and args.readcache:
if row < len(cache):
matrix = cache[row]
else:
logging.warning(
"Ran out of cached FFT values, will update the cache.")
cache_found = False
if matrix == None:
# No cache - Compute FFT in this chunk, and cache results
matrix = calculate_levels(data, sample_rate, frequency_limits)
cache.append(matrix)
# blank out the display
led.fill(Color(0, 0, 0), 0, 151)
for i in range(0, hc.GPIOLEN):
if hc.is_pin_pwm(i):
# Output pwm, where off is at 0.5 std below the mean
# and full on is at 0.75 std above the mean.
display_column(i, matrix[i])
#brightness = matrix[i] - mean[i] + 0.5 * std[i]
#brightness = brightness / (1.25 * std[i])
#if brightness > 1.0:
#brightness = 1.0
#if brightness < 0:
#brightness = 0
#hc.turn_on_light(i, True, int(brightness * 60))
else:
if limit[i] < matrix[i] * _LIMIT_THRESHOLD:
limit[i] = limit[i] * _LIMIT_THRESHOLD_INCREASE
logging.debug("++++ channel: {0}; limit: {1:.3f}".format(
i, limit[i]))
# Amplitude has reached threshold
if matrix[i] > limit[i]:
hc.turn_on_light(i, True)
offct[i] = 0
else: # Amplitude did not reach threshold
offct[i] = offct[i] + 1
if offct[i] > _MAX_OFF_CYCLES:
offct[i] = 0
limit[i] = limit[
i] * _LIMIT_THRESHOLD_DECREASE # old value 0.8
logging.debug("---- channel: {0}; limit: {1:.3f}".format(
i, limit[i]))
hc.turn_off_light(i, True)
# send out data to RGB LED Strip
led.update()
# Read next chunk of data from music song_filename
data = musicfile.readframes(CHUNK_SIZE)
row = row + 1
# Load new application state in case we've been interrupted
cm.load_state()
play_now = int(cm.get_state('play_now', 0))
if not cache_found:
with gzip.open(cache_filename, 'wb') as playlist_fp:
writer = csv.writer(playlist_fp, delimiter=',')
writer.writerows(cache)
logging.info("Cached sync data written to '." + cache_filename +
"' [" + str(len(cache)) + " rows]")
# We're done, turn it all off ;)
hc.clean_up()
def play_song():
"""Play the next song from the play list (or --file argument)."""
# get the next song to play
song_filename, config_filename, cache_filename = get_song()
# load custom configuration from file
load_custom_config(config_filename)
# Initialize Lights
network.set_playing()
hc.initialize()
# Handle the pre/post show
play_now = int(cm.get_state('play_now', "0"))
network.unset_playing()
if not play_now:
result = PrePostShow('preshow', hc).execute()
if result == PrePostShow.play_now_interrupt:
play_now = int(cm.get_state('play_now', "0"))
network.set_playing()
# Ensure play_now is reset before beginning playback
if play_now:
cm.update_state('play_now', "0")
play_now = 0
# setup audio file and output device
output, fft_calc, music_file, light_delay = setup_audio(song_filename)
# setup our cache_matrix, std, mean
cache_found, cache_matrix, std, mean = setup_cache(cache_filename, fft_calc)
matrix_buffer = deque([], 1000)
# Process audio song_filename
row = 0
data = music_file.readframes(CHUNK_SIZE)
while data != '' and not play_now:
# output data to sound device
output(data)
# Control lights with cached timing values if they exist
matrix = None
if cache_found and args.readcache:
if row < len(cache_matrix):
matrix = cache_matrix[row]
else:
log.warning("Ran out of cached FFT values, will update the cache.")
cache_found = False
if matrix is None:
# No cache - Compute FFT in this chunk, and cache results
matrix = fft_calc.calculate_levels(data)
# Add the matrix to the end of the cache
cache_matrix = np.vstack([cache_matrix, matrix])
matrix_buffer.appendleft(matrix)
if len(matrix_buffer) > light_delay:
matrix = matrix_buffer[light_delay]
update_lights(matrix, mean, std)
# Read next chunk of data from music song_filename
data = music_file.readframes(CHUNK_SIZE)
row += 1
# Load new application state in case we've been interrupted
cm.load_state()
play_now = int(cm.get_state('play_now', "0"))
if not cache_found:
save_cache(cache_matrix, cache_filename, fft_calc)
# Cleanup the pifm process
if cm.audio_processing.fm:
fm_process.kill()
# check for postshow
network.unset_playing()
if not play_now:
PrePostShow('postshow', hc).execute()
# We're done, turn it all off and clean up things ;)
hc.clean_up()
def main():
"""
ladder
Lights one channel at a time in order
Then backs down to the first
Then repeat everything 20 times
"""
# this is a list of all the channels you have access to
lights = hc._GPIO_PINS
# initialize your hardware for use
hc.initialize()
# start with all the lights off
hc.turn_off_lights()
# pause for 1 second
time.sleep(1)
# working loop
for _ in range(20):
# try except block to catch keyboardinterrupt by user to stop
try:
# here we just loop over the gpio pins and do something with them
# except the last one
for light in range(len(lights)-1):
# turn off all the lights
hc.turn_off_lights()
# then turn on one
hc.turn_on_light(lights[light])
# wait a little bit
time.sleep(.04)
# to make the transition back smoother we handle the last pin here
hc.turn_off_lights()
hc.turn_on_light(lights[light + 1])
# this loop walks it back the other way
for light in range(len(lights)-1, 0, -1):
# turn off all the lights
hc.turn_off_lights()
# then turn on one
hc.turn_on_light(lights[light])
# wait a little bit
time.sleep(.04)
# again to make it smoother handle the first pin like the last pin
hc.turn_off_lights()
hc.turn_on_light(lights[light - 1])
# if the user pressed <CTRL> + C to exit early break out of the loop
except KeyboardInterrupt:
print "\nstopped"
break
# This ends and cleans up everything
hc.clean_up()
