def kepbinary(infile,outfile,datacol,m1,m2,r1,r2,period,bjd0,eccn,omega,inclination,
c1,c2,c3,c4,albedo,depth,contamination,gamma,fitparams,eclipses,dopboost,
tides,job,clobber,verbose,logfile,status):
# startup parameters
status = 0
labelsize = 24; ticksize = 16; xsize = 17; ysize = 7
lcolor = '#0000ff'; lwidth = 1.0; fcolor = '#ffff00'; falpha = 0.2
# log the call
hashline = '----------------------------------------------------------------------------'
kepmsg.log(logfile,hashline,verbose)
call = 'KEPBINARY -- '
call += 'infile='+infile+' '
call += 'outfile='+outfile+' '
call += 'datacol='+datacol+' '
call += 'm1='+str(m1)+' '
call += 'm2='+str(m2)+' '
call += 'r1='+str(r1)+' '
call += 'r2='+str(r2)+' '
call += 'period='+str(period)+' '
call += 'bjd0='+str(bjd0)+' '
call += 'eccn='+str(eccn)+' '
call += 'omega='+str(omega)+' '
call += 'inclination='+str(inclination)+' '
call += 'c1='+str(c1)+' '
call += 'c2='+str(c2)+' '
call += 'c3='+str(c3)+' '
call += 'c4='+str(c4)+' '
call += 'albedo='+str(albedo)+' '
call += 'depth='+str(depth)+' '
call += 'contamination='+str(contamination)+' '
call += 'gamma='+str(gamma)+' '
call += 'fitparams='+str(fitparams)+' '
eclp = 'n'
if (eclipses): eclp = 'y'
call += 'eclipses='+eclp+ ' '
boost = 'n'
if (dopboost): boost = 'y'
call += 'dopboost='+boost+ ' '
distort = 'n'
if (tides): distort = 'y'
call += 'tides='+distort+ ' '
call += 'job='+str(job)+ ' '
overwrite = 'n'
if (clobber): overwrite = 'y'
call += 'clobber='+overwrite+ ' '
chatter = 'n'
if (verbose): chatter = 'y'
call += 'verbose='+chatter+' '
call += 'logfile='+logfile
kepmsg.log(logfile,call+'\n',verbose)
# start time
kepmsg.clock('KEPBINARY started at',logfile,verbose)
# test log file
logfile = kepmsg.test(logfile)
# check and format the list of fit parameters
if status == 0 and job == 'fit':
allParams = [m1,m2,r1,r2,period,bjd0,eccn,omega,inclination]
allNames = ['m1','m2','r1','r2','period','bjd0','eccn','omega','inclination']
fitparams = re.sub('\|',',',fitparams.strip())
fitparams = re.sub('\.',',',fitparams.strip())
fitparams = re.sub(';',',',fitparams.strip())
fitparams = re.sub(':',',',fitparams.strip())
fitparams = re.sub('\s+',',',fitparams.strip())
fitparams, status = kepio.parselist(fitparams,logfile,verbose)
for fitparam in fitparams:
if fitparam.strip() not in allNames:
message = 'ERROR -- KEPBINARY: unknown field in list of fit parameters'
status = kepmsg.err(logfile,message,verbose)
# clobber output file
if status == 0:
if clobber: status = kepio.clobber(outfile,logfile,verbose)
if kepio.fileexists(outfile):
message = 'ERROR -- KEPBINARY: ' + outfile + ' exists. Use --clobber'
status = kepmsg.err(logfile,message,verbose)
# open input file
if status == 0:
instr, status = kepio.openfits(infile,'readonly',logfile,verbose)
if status == 0:
tstart, tstop, bjdref, cadence, status = kepio.timekeys(instr,infile,logfile,verbose,status)
if status == 0:
try:
work = instr[0].header['FILEVER']
cadenom = 1.0
except:
cadenom = cadence
# check the data column exists
if status == 0:
try:
instr[1].data.field(datacol)
except:
message = 'ERROR -- KEPBINARY: ' + datacol + ' column does not exist in ' + infile + '[1]'
status = kepmsg.err(logfile,message,verbose)
# fudge non-compliant FITS keywords with no values
if status == 0:
instr = kepkey.emptykeys(instr,file,logfile,verbose)
# read table structure
if status == 0:
table, status = kepio.readfitstab(infile,instr[1],logfile,verbose)
# filter input data table
if status == 0:
try:
nanclean = instr[1].header['NANCLEAN']
except:
naxis2 = 0
try:
for i in range(len(table.field(0))):
if numpy.isfinite(table.field('barytime')[i]) and \
numpy.isfinite(table.field(datacol)[i]):
table[naxis2] = table[i]
naxis2 += 1
instr[1].data = table[:naxis2]
except:
for i in range(len(table.field(0))):
if numpy.isfinite(table.field('time')[i]) and \
numpy.isfinite(table.field(datacol)[i]):
table[naxis2] = table[i]
naxis2 += 1
instr[1].data = table[:naxis2]
comment = 'NaN cadences removed from data'
status = kepkey.new('NANCLEAN',True,comment,instr[1],outfile,logfile,verbose)
# read table columns
if status == 0:
try:
time = instr[1].data.field('barytime')
except:
time, status = kepio.readfitscol(infile,instr[1].data,'time',logfile,verbose)
indata, status = kepio.readfitscol(infile,instr[1].data,datacol,logfile,verbose)
if status == 0:
time = time + bjdref
indata = indata / cadenom
# limb-darkening cofficients
if status == 0:
limbdark = numpy.array([c1,c2,c3,c4],dtype='float32')
# time details for model
if status == 0:
npt = len(time)
exptime = numpy.zeros((npt),dtype='float64')
dtype = numpy.zeros((npt),dtype='int')
for i in range(npt):
try:
exptime[i] = time[i+1] - time[i]
except:
exptime[i] = time[i] - time[i-1]
# calculate binary model
if status == 0:
tmodel = kepsim.transitModel(1.0,m1,m2,r1,r2,period,inclination,bjd0,eccn,omega,depth,
albedo,c1,c2,c3,c4,gamma,contamination,npt,time,exptime,
dtype,eclipses,dopboost,tides)
# re-normalize binary model to data
if status == 0 and (job == 'overlay' or job == 'fit'):
dmedian = numpy.median(indata)
tmodel = tmodel / numpy.median(tmodel) * dmedian
# define arrays of floating and frozen parameters
if status == 0 and job =='fit':
params = []; paramNames = []; arguments = []; argNames = []
for i in range(len(allNames)):
if allNames[i] in fitparams:
params.append(allParams[i])
paramNames.append(allNames[i])
else:
arguments.append(allParams[i])
argNames.append(allNames[i])
params.append(dmedian)
params = numpy.array(params,dtype='float32')
# subtract model from data
if status == 0 and job == 'fit':
deltam = numpy.abs(indata - tmodel)
# fit statistics
if status == 0 and job == 'fit':
aveDelta = numpy.sum(deltam) / npt
chi2 = math.sqrt(numpy.sum((indata - tmodel) * (indata - tmodel) / (npt - len(params))))
# fit model to data using downhill simplex
if status == 0 and job == 'fit':
print ''
print '%4s %11s %11s' % ('iter', 'delta', 'chi^2')
print '----------------------------'
print '%4d %.5E %.5E' % (0,aveDelta,chi2)
bestFit = scipy.optimize.fmin(fitModel,params,args=(paramNames,dmedian,m1,m2,r1,r2,period,bjd0,eccn,
omega,inclination,depth,albedo,c1,c2,c3,c4,
gamma,contamination,npt,time,exptime,indata,
dtype,eclipses,dopboost,tides),maxiter=1e4)
# calculate best fit binary model
if status == 0 and job == 'fit':
print ''
for i in range(len(paramNames)):
if 'm1' in paramNames[i].lower():
m1 = bestFit[i]
print ' M1 = %.3f Msun' % bestFit[i]
elif 'm2' in paramNames[i].lower():
m2 = bestFit[i]
print ' M2 = %.3f Msun' % bestFit[i]
elif 'r1' in paramNames[i].lower():
r1 = bestFit[i]
print ' R1 = %.4f Rsun' % bestFit[i]
elif 'r2' in paramNames[i].lower():
r2 = bestFit[i]
print ' R2 = %.4f Rsun' % bestFit[i]
elif 'period' in paramNames[i].lower():
period = bestFit[i]
elif 'bjd0' in paramNames[i].lower():
bjd0 = bestFit[i]
print 'BJD0 = %.8f' % bestFit[i]
elif 'eccn' in paramNames[i].lower():
eccn = bestFit[i]
print ' e = %.3f' % bestFit[i]
elif 'omega' in paramNames[i].lower():
omega = bestFit[i]
print ' w = %.3f deg' % bestFit[i]
elif 'inclination' in paramNames[i].lower():
inclination = bestFit[i]
print ' i = %.3f deg' % bestFit[i]
flux = bestFit[-1]
print ''
tmodel = kepsim.transitModel(flux,m1,m2,r1,r2,period,inclination,bjd0,eccn,omega,depth,
albedo,c1,c2,c3,c4,gamma,contamination,npt,time,exptime,
dtype,eclipses,dopboost,tides)
# subtract model from data
if status == 0:
deltaMod = indata - tmodel
# standard deviation of model
if status == 0:
stdDev = math.sqrt(numpy.sum((indata - tmodel) * (indata - tmodel)) / npt)
# clean up x-axis unit
if status == 0:
time0 = float(int(tstart / 100) * 100.0)
ptime = time - time0
xlab = 'BJD $-$ %d' % time0
# clean up y-axis units
if status == 0:
nrm = len(str(int(indata.max())))-1
pout = indata / 10**nrm
pmod = tmodel / 10**nrm
pres = deltaMod / stdDev
if job == 'fit' or job == 'overlay':
try:
ylab1 = 'Flux (10$^%d$ e$^-$ s$^{-1}$)' % nrm
ylab2 = 'Residual ($\sigma$)'
except:
ylab1 = 'Flux (10**%d e-/s)' % nrm
ylab2 = 'Residual (sigma)'
else:
ylab1 = 'Normalized Flux'
# dynamic range of model plot
if status == 0 and job == 'model':
xmin = ptime.min()
xmax = ptime.max()
ymin = tmodel.min()
ymax = tmodel.max()
# dynamic range of model/data overlay or fit
if status == 0 and (job == 'overlay' or job == 'fit'):
xmin = ptime.min()
xmax = ptime.max()
ymin = pout.min()
ymax = pout.max()
tmin = pmod.min()
tmax = pmod.max()
ymin = numpy.array([ymin,tmin]).min()
ymax = numpy.array([ymax,tmax]).max()
rmin = pres.min()
rmax = pres.max()
# pad the dynamic range
if status == 0:
xr = (xmax - xmin) / 80
yr = (ymax - ymin) / 40
if job == 'overlay' or job == 'fit':
rr = (rmax - rmin) / 40
# set up plot style
if status == 0:
labelsize = 24; ticksize = 16; xsize = 17; ysize = 7
lcolor = '#0000ff'; lwidth = 1.0; fcolor = '#ffff00'; falpha = 0.2
params = {'backend': 'png',
'axes.linewidth': 2.5,
'axes.labelsize': 24,
'axes.font': 'sans-serif',
'axes.fontweight' : 'bold',
'text.fontsize': 12,
'legend.fontsize': 12,
'xtick.labelsize': 16,
'ytick.labelsize': 16}
pylab.rcParams.update(params)
pylab.figure(figsize=[14,10])
pylab.clf()
# main plot window
ax = pylab.axes([0.05,0.3,0.94,0.68])
pylab.gca().xaxis.set_major_formatter(pylab.ScalarFormatter(useOffset=False))
pylab.gca().yaxis.set_major_formatter(pylab.ScalarFormatter(useOffset=False))
labels = ax.get_yticklabels()
setp(labels, 'rotation', 90, fontsize=12)
# plot model time series
if status == 0 and job == 'model':
pylab.plot(ptime,tmodel,color='#0000ff',linestyle='-',linewidth=1.0)
ptime = numpy.insert(ptime,[0.0],ptime[0])
ptime = numpy.append(ptime,ptime[-1])
tmodel = numpy.insert(tmodel,[0.0],0.0)
tmodel = numpy.append(tmodel,0.0)
pylab.fill(ptime,tmodel,fc='#ffff00',linewidth=0.0,alpha=0.2)
# plot data time series and best fit
if status == 0 and (job == 'overlay' or job == 'fit'):
pylab.plot(ptime,pout,color='#0000ff',linestyle='-',linewidth=1.0)
ptime = numpy.insert(ptime,[0.0],ptime[0])
ptime = numpy.append(ptime,ptime[-1])
pout = numpy.insert(pout,[0],0.0)
pout = numpy.append(pout,0.0)
pylab.fill(ptime,pout,fc='#ffff00',linewidth=0.0,alpha=0.2)
pylab.plot(ptime[1:-1],pmod,color='r',linestyle='-',linewidth=2.0)
# ranges and labels
if status == 0:
pylab.xlim(xmin-xr,xmax+xr)
pylab.ylim(ymin-yr,ymax+yr)
pylab.xlabel(xlab, {'color' : 'k'})
pylab.ylabel(ylab1, {'color' : 'k'})
# residual plot window
if status == 0 and (job == 'overlay' or job == 'fit'):
ax = pylab.axes([0.05,0.07,0.94,0.23])
pylab.gca().xaxis.set_major_formatter(pylab.ScalarFormatter(useOffset=False))
pylab.gca().yaxis.set_major_formatter(pylab.ScalarFormatter(useOffset=False))
labels = ax.get_yticklabels()
setp(labels, 'rotation', 90, fontsize=12)
# plot residual time series
if status == 0 and (job == 'overlay' or job == 'fit'):
pylab.plot([ptime[0],ptime[-1]],[0.0,0.0],color='r',linestyle='--',linewidth=1.0)
pylab.plot([ptime[0],ptime[-1]],[-1.0,-1.0],color='r',linestyle='--',linewidth=1.0)
pylab.plot([ptime[0],ptime[-1]],[1.0,1.0],color='r',linestyle='--',linewidth=1.0)
pylab.plot(ptime[1:-1],pres,color='#0000ff',linestyle='-',linewidth=1.0)
pres = numpy.insert(pres,[0],rmin)
pres = numpy.append(pres,rmin)
pylab.fill(ptime,pres,fc='#ffff00',linewidth=0.0,alpha=0.2)
# ranges and labels of residual time series
if status == 0 and (job == 'overlay' or job == 'fit'):
pylab.xlim(xmin-xr,xmax+xr)
pylab.ylim(rmin-rr,rmax+rr)
pylab.xlabel(xlab, {'color' : 'k'})
pylab.ylabel(ylab2, {'color' : 'k'})
# display the plot
if status == 0:
pylab.draw()
def kepstitch(infiles,outfile,clobber,verbose,logfile,status):
# startup parameters
status = 0
lct = []; bjd = []
# log the call
hashline = '----------------------------------------------------------------------------'
kepmsg.log(logfile,hashline,verbose)
call = 'KEPSTITCH -- '
call += 'infiles='+infiles+' '
call += 'outfile='+outfile+' '
overwrite = 'n'
if (clobber): overwrite = 'y'
call += 'clobber='+overwrite+ ' '
chatter = 'n'
if (verbose): chatter = 'y'
call += 'verbose='+chatter+' '
call += 'logfile='+logfile
kepmsg.log(logfile,call+'\n',verbose)
# start time
kepmsg.clock('KEPSTITCH started at',logfile,verbose)
# test log file
logfile = kepmsg.test(logfile)
# parse input file list
infiles, status = kepio.parselist(infiles,logfile,verbose)
# clobber output file
if clobber: status = kepio.clobber(outfile,logfile,verbose)
if kepio.fileexists(outfile):
message = 'ERROR -- KEPSTITCH: ' + outfile + ' exists. Use clobber=yes'
kepmsg.err(logfile,message,verbose)
status = 1
# open output file
if status == 0:
outstr, status = kepio.openfits(infiles[0],'readonly',logfile,verbose)
nrows1 = outstr[1].data.shape[0]
# fudge non-compliant FITS keywords with no values
if status == 0:
outstr = kepkey.emptykeys(outstr,file,logfile,verbose)
head0 = outstr[0].header
head1 = outstr[1].header
# open input files
nfiles = 0
if status == 0:
for infile in infiles:
instr, status = kepio.openfits(infile,'readonly',logfile,verbose)
# append table data
if nfiles > 0:
nrows2 = instr[1].data.shape[0]
nrows = nrows1 + nrows2
outtab = pyfits.new_table(outstr[1].columns,nrows=nrows)
for name in outstr[1].columns.names:
try:
outtab.data.field(name)[nrows1:]=instr[1].data.field(name)
except:
message = 'ERROR -- KEPSTITCH: column ' + name + ' missing from some files.'
kepmsg.warn(logfile,message)
pass
outstr[1] = outtab
outstr[0].header = head0
outstr[1].header = head1
nrows1 = nrows
# start and stop times of data
fitsvers = 1.0
lc_start, status = kepkey.get(infile,instr[1],'LC_START',logfile,verbose)
lc_end, status = kepkey.get(infile,instr[1],'LC_END',logfile,verbose)
try:
startbjd = instr[1].header['STARTBJD']
except:
startbjd, status = kepkey.get(infile,instr[1],'TSTART',logfile,verbose)
fitsvers = 2.0
try:
endbjd = instr[1].header['ENDBJD']
except:
endbjd, status = kepkey.get(infile,instr[1],'TSTOP',logfile,verbose)
fitsvers = 2.0
lct.append(lc_start); lct.append(lc_end)
bjd.append(startbjd); bjd.append(endbjd)
# close input files
status = kepio.closefits(instr,logfile,verbose)
nfiles += 1
# maxmimum and minimum times in file sample
if status == 0:
lc_start = kepstat.min(lct)
lc_end = kepstat.max(lct)
startbjd = kepstat.min(bjd)
endbjd = kepstat.max(bjd)
status = kepkey.change('LC_START',lc_start,outstr[1],outfile,logfile,verbose)
status = kepkey.change('LC_END',lc_end,outstr[1],outfile,logfile,verbose)
if fitsvers == 1.0:
status = kepkey.change('STARTBJD',startbjd,outstr[1],outfile,logfile,verbose)
status = kepkey.change('ENDBJD',endbjd,outstr[1],outfile,logfile,verbose)
else:
status = kepkey.change('TSTART',startbjd,outstr[1],outfile,logfile,verbose)
status = kepkey.change('TSTOP',endbjd,outstr[1],outfile,logfile,verbose)
# comment keyword in output file
if status == 0:
status = kepkey.comment(call,outstr[0],outfile,logfile,verbose)
# close output file
if status == 0:
outstr.writeto(outfile)
status = kepio.closefits(outstr,logfile,verbose)
## end time
if (status == 0):
message = 'KEPSTITCH completed at'
else:
message = '\nKEPSTITCH aborted at'
kepmsg.clock(message,logfile,verbose)
def kepbinary(infile, outfile, datacol, m1, m2, r1, r2, period, bjd0, eccn,
omega, inclination, c1, c2, c3, c4, albedo, depth, contamination,
gamma, fitparams, eclipses, dopboost, tides, job, clobber,
verbose, logfile, status):
# startup parameters
status = 0
labelsize = 24
ticksize = 16
xsize = 17
ysize = 7
lcolor = '#0000ff'
lwidth = 1.0
fcolor = '#ffff00'
falpha = 0.2
# log the call
hashline = '----------------------------------------------------------------------------'
kepmsg.log(logfile, hashline, verbose)
call = 'KEPBINARY -- '
call += 'infile=' + infile + ' '
call += 'outfile=' + outfile + ' '
call += 'datacol=' + datacol + ' '
call += 'm1=' + str(m1) + ' '
call += 'm2=' + str(m2) + ' '
call += 'r1=' + str(r1) + ' '
call += 'r2=' + str(r2) + ' '
call += 'period=' + str(period) + ' '
call += 'bjd0=' + str(bjd0) + ' '
call += 'eccn=' + str(eccn) + ' '
call += 'omega=' + str(omega) + ' '
call += 'inclination=' + str(inclination) + ' '
call += 'c1=' + str(c1) + ' '
call += 'c2=' + str(c2) + ' '
call += 'c3=' + str(c3) + ' '
call += 'c4=' + str(c4) + ' '
call += 'albedo=' + str(albedo) + ' '
call += 'depth=' + str(depth) + ' '
call += 'contamination=' + str(contamination) + ' '
call += 'gamma=' + str(gamma) + ' '
call += 'fitparams=' + str(fitparams) + ' '
eclp = 'n'
if (eclipses): eclp = 'y'
call += 'eclipses=' + eclp + ' '
boost = 'n'
if (dopboost): boost = 'y'
call += 'dopboost=' + boost + ' '
distort = 'n'
if (tides): distort = 'y'
call += 'tides=' + distort + ' '
call += 'job=' + str(job) + ' '
overwrite = 'n'
if (clobber): overwrite = 'y'
call += 'clobber=' + overwrite + ' '
chatter = 'n'
if (verbose): chatter = 'y'
call += 'verbose=' + chatter + ' '
call += 'logfile=' + logfile
kepmsg.log(logfile, call + '\n', verbose)
# start time
kepmsg.clock('KEPBINARY started at', logfile, verbose)
# test log file
logfile = kepmsg.test(logfile)
# check and format the list of fit parameters
if status == 0 and job == 'fit':
allParams = [m1, m2, r1, r2, period, bjd0, eccn, omega, inclination]
allNames = [
'm1', 'm2', 'r1', 'r2', 'period', 'bjd0', 'eccn', 'omega',
'inclination'
]
fitparams = re.sub('\|', ',', fitparams.strip())
fitparams = re.sub('\.', ',', fitparams.strip())
fitparams = re.sub(';', ',', fitparams.strip())
fitparams = re.sub(':', ',', fitparams.strip())
fitparams = re.sub('\s+', ',', fitparams.strip())
fitparams, status = kepio.parselist(fitparams, logfile, verbose)
for fitparam in fitparams:
if fitparam.strip() not in allNames:
message = 'ERROR -- KEPBINARY: unknown field in list of fit parameters'
status = kepmsg.err(logfile, message, verbose)
# clobber output file
if status == 0:
if clobber: status = kepio.clobber(outfile, logfile, verbose)
if kepio.fileexists(outfile):
message = 'ERROR -- KEPBINARY: ' + outfile + ' exists. Use --clobber'
status = kepmsg.err(logfile, message, verbose)
# open input file
if status == 0:
instr, status = kepio.openfits(infile, 'readonly', logfile, verbose)
if status == 0:
tstart, tstop, bjdref, cadence, status = kepio.timekeys(
instr, infile, logfile, verbose, status)
if status == 0:
try:
work = instr[0].header['FILEVER']
cadenom = 1.0
except:
cadenom = cadence
# check the data column exists
if status == 0:
try:
instr[1].data.field(datacol)
except:
message = 'ERROR -- KEPBINARY: ' + datacol + ' column does not exist in ' + infile + '[1]'
status = kepmsg.err(logfile, message, verbose)
# fudge non-compliant FITS keywords with no values
if status == 0:
instr = kepkey.emptykeys(instr, file, logfile, verbose)
# read table structure
if status == 0:
table, status = kepio.readfitstab(infile, instr[1], logfile, verbose)
# filter input data table
if status == 0:
try:
nanclean = instr[1].header['NANCLEAN']
except:
naxis2 = 0
try:
for i in range(len(table.field(0))):
if numpy.isfinite(table.field('barytime')[i]) and \
numpy.isfinite(table.field(datacol)[i]):
table[naxis2] = table[i]
naxis2 += 1
instr[1].data = table[:naxis2]
except:
for i in range(len(table.field(0))):
if numpy.isfinite(table.field('time')[i]) and \
numpy.isfinite(table.field(datacol)[i]):
table[naxis2] = table[i]
naxis2 += 1
instr[1].data = table[:naxis2]
comment = 'NaN cadences removed from data'
status = kepkey.new('NANCLEAN', True, comment, instr[1], outfile,
logfile, verbose)
# read table columns
if status == 0:
try:
time = instr[1].data.field('barytime')
except:
time, status = kepio.readfitscol(infile, instr[1].data, 'time',
logfile, verbose)
indata, status = kepio.readfitscol(infile, instr[1].data, datacol,
logfile, verbose)
if status == 0:
time = time + bjdref
indata = indata / cadenom
# limb-darkening cofficients
if status == 0:
limbdark = numpy.array([c1, c2, c3, c4], dtype='float32')
# time details for model
if status == 0:
npt = len(time)
exptime = numpy.zeros((npt), dtype='float64')
dtype = numpy.zeros((npt), dtype='int')
for i in range(npt):
try:
exptime[i] = time[i + 1] - time[i]
except:
exptime[i] = time[i] - time[i - 1]
# calculate binary model
if status == 0:
tmodel = kepsim.transitModel(1.0, m1, m2, r1, r2, period, inclination,
bjd0, eccn, omega, depth, albedo, c1, c2,
c3, c4, gamma, contamination, npt, time,
exptime, dtype, eclipses, dopboost, tides)
# re-normalize binary model to data
if status == 0 and (job == 'overlay' or job == 'fit'):
dmedian = numpy.median(indata)
tmodel = tmodel / numpy.median(tmodel) * dmedian
# define arrays of floating and frozen parameters
if status == 0 and job == 'fit':
params = []
paramNames = []
arguments = []
argNames = []
for i in range(len(allNames)):
if allNames[i] in fitparams:
params.append(allParams[i])
paramNames.append(allNames[i])
else:
arguments.append(allParams[i])
argNames.append(allNames[i])
params.append(dmedian)
params = numpy.array(params, dtype='float32')
# subtract model from data
if status == 0 and job == 'fit':
deltam = numpy.abs(indata - tmodel)
# fit statistics
if status == 0 and job == 'fit':
aveDelta = numpy.sum(deltam) / npt
chi2 = math.sqrt(
numpy.sum(
(indata - tmodel) * (indata - tmodel) / (npt - len(params))))
# fit model to data using downhill simplex
if status == 0 and job == 'fit':
print ''
print '%4s %11s %11s' % ('iter', 'delta', 'chi^2')
print '----------------------------'
print '%4d %.5E %.5E' % (0, aveDelta, chi2)
bestFit = scipy.optimize.fmin(
fitModel,
params,
args=(paramNames, dmedian, m1, m2, r1, r2, period, bjd0, eccn,
omega, inclination, depth, albedo, c1, c2, c3, c4, gamma,
contamination, npt, time, exptime, indata, dtype, eclipses,
dopboost, tides),
maxiter=1e4)
# calculate best fit binary model
if status == 0 and job == 'fit':
print ''
for i in range(len(paramNames)):
if 'm1' in paramNames[i].lower():
m1 = bestFit[i]
print ' M1 = %.3f Msun' % bestFit[i]
elif 'm2' in paramNames[i].lower():
m2 = bestFit[i]
print ' M2 = %.3f Msun' % bestFit[i]
elif 'r1' in paramNames[i].lower():
r1 = bestFit[i]
print ' R1 = %.4f Rsun' % bestFit[i]
elif 'r2' in paramNames[i].lower():
r2 = bestFit[i]
print ' R2 = %.4f Rsun' % bestFit[i]
elif 'period' in paramNames[i].lower():
period = bestFit[i]
elif 'bjd0' in paramNames[i].lower():
bjd0 = bestFit[i]
print 'BJD0 = %.8f' % bestFit[i]
elif 'eccn' in paramNames[i].lower():
eccn = bestFit[i]
print ' e = %.3f' % bestFit[i]
elif 'omega' in paramNames[i].lower():
omega = bestFit[i]
print ' w = %.3f deg' % bestFit[i]
elif 'inclination' in paramNames[i].lower():
inclination = bestFit[i]
print ' i = %.3f deg' % bestFit[i]
flux = bestFit[-1]
print ''
tmodel = kepsim.transitModel(flux, m1, m2, r1, r2, period, inclination,
bjd0, eccn, omega, depth, albedo, c1, c2,
c3, c4, gamma, contamination, npt, time,
exptime, dtype, eclipses, dopboost, tides)
# subtract model from data
if status == 0:
deltaMod = indata - tmodel
# standard deviation of model
if status == 0:
stdDev = math.sqrt(
numpy.sum((indata - tmodel) * (indata - tmodel)) / npt)
# clean up x-axis unit
if status == 0:
time0 = float(int(tstart / 100) * 100.0)
ptime = time - time0
xlab = 'BJD $-$ %d' % time0
# clean up y-axis units
if status == 0:
nrm = len(str(int(indata.max()))) - 1
pout = indata / 10**nrm
pmod = tmodel / 10**nrm
pres = deltaMod / stdDev
if job == 'fit' or job == 'overlay':
try:
ylab1 = 'Flux (10$^%d$ e$^-$ s$^{-1}$)' % nrm
ylab2 = 'Residual ($\sigma$)'
except:
ylab1 = 'Flux (10**%d e-/s)' % nrm
ylab2 = 'Residual (sigma)'
else:
ylab1 = 'Normalized Flux'
# dynamic range of model plot
if status == 0 and job == 'model':
xmin = ptime.min()
xmax = ptime.max()
ymin = tmodel.min()
ymax = tmodel.max()
# dynamic range of model/data overlay or fit
if status == 0 and (job == 'overlay' or job == 'fit'):
xmin = ptime.min()
xmax = ptime.max()
ymin = pout.min()
ymax = pout.max()
tmin = pmod.min()
tmax = pmod.max()
ymin = numpy.array([ymin, tmin]).min()
ymax = numpy.array([ymax, tmax]).max()
rmin = pres.min()
rmax = pres.max()
# pad the dynamic range
if status == 0:
xr = (xmax - xmin) / 80
yr = (ymax - ymin) / 40
if job == 'overlay' or job == 'fit':
rr = (rmax - rmin) / 40
# set up plot style
if status == 0:
labelsize = 24
ticksize = 16
xsize = 17
ysize = 7
lcolor = '#0000ff'
lwidth = 1.0
fcolor = '#ffff00'
falpha = 0.2
params = {
'backend': 'png',
'axes.linewidth': 2.5,
'axes.labelsize': 24,
'axes.font': 'sans-serif',
'axes.fontweight': 'bold',
'text.fontsize': 12,
'legend.fontsize': 12,
'xtick.labelsize': 16,
'ytick.labelsize': 16
}
pylab.rcParams.update(params)
pylab.figure(figsize=[14, 10])
pylab.clf()
# main plot window
ax = pylab.axes([0.05, 0.3, 0.94, 0.68])
pylab.gca().xaxis.set_major_formatter(
pylab.ScalarFormatter(useOffset=False))
pylab.gca().yaxis.set_major_formatter(
pylab.ScalarFormatter(useOffset=False))
labels = ax.get_yticklabels()
setp(labels, 'rotation', 90, fontsize=12)
# plot model time series
if status == 0 and job == 'model':
pylab.plot(ptime,
tmodel,
color='#0000ff',
linestyle='-',
linewidth=1.0)
ptime = numpy.insert(ptime, [0.0], ptime[0])
ptime = numpy.append(ptime, ptime[-1])
tmodel = numpy.insert(tmodel, [0.0], 0.0)
tmodel = numpy.append(tmodel, 0.0)
pylab.fill(ptime, tmodel, fc='#ffff00', linewidth=0.0, alpha=0.2)
# plot data time series and best fit
if status == 0 and (job == 'overlay' or job == 'fit'):
pylab.plot(ptime, pout, color='#0000ff', linestyle='-', linewidth=1.0)
ptime = numpy.insert(ptime, [0.0], ptime[0])
ptime = numpy.append(ptime, ptime[-1])
pout = numpy.insert(pout, [0], 0.0)
pout = numpy.append(pout, 0.0)
pylab.fill(ptime, pout, fc='#ffff00', linewidth=0.0, alpha=0.2)
pylab.plot(ptime[1:-1], pmod, color='r', linestyle='-', linewidth=2.0)
# ranges and labels
if status == 0:
pylab.xlim(xmin - xr, xmax + xr)
pylab.ylim(ymin - yr, ymax + yr)
pylab.xlabel(xlab, {'color': 'k'})
pylab.ylabel(ylab1, {'color': 'k'})
# residual plot window
if status == 0 and (job == 'overlay' or job == 'fit'):
ax = pylab.axes([0.05, 0.07, 0.94, 0.23])
pylab.gca().xaxis.set_major_formatter(
pylab.ScalarFormatter(useOffset=False))
pylab.gca().yaxis.set_major_formatter(
pylab.ScalarFormatter(useOffset=False))
labels = ax.get_yticklabels()
setp(labels, 'rotation', 90, fontsize=12)
# plot residual time series
if status == 0 and (job == 'overlay' or job == 'fit'):
pylab.plot([ptime[0], ptime[-1]], [0.0, 0.0],
color='r',
linestyle='--',
linewidth=1.0)
pylab.plot([ptime[0], ptime[-1]], [-1.0, -1.0],
color='r',
linestyle='--',
linewidth=1.0)
pylab.plot([ptime[0], ptime[-1]], [1.0, 1.0],
color='r',
linestyle='--',
linewidth=1.0)
pylab.plot(ptime[1:-1],
pres,
color='#0000ff',
linestyle='-',
linewidth=1.0)
pres = numpy.insert(pres, [0], rmin)
pres = numpy.append(pres, rmin)
pylab.fill(ptime, pres, fc='#ffff00', linewidth=0.0, alpha=0.2)
# ranges and labels of residual time series
if status == 0 and (job == 'overlay' or job == 'fit'):
pylab.xlim(xmin - xr, xmax + xr)
pylab.ylim(rmin - rr, rmax + rr)
pylab.xlabel(xlab, {'color': 'k'})
pylab.ylabel(ylab2, {'color': 'k'})
# display the plot
if status == 0:
pylab.draw()
