def hireWorker(self, argtuple=(), argdict={}):
# Create and start the appropriate kind of Worker to perform
# the menu item. If menuItem is threadable create a threaded
# Worker and launch the thread. There are different kinds of
# threaded Workers. getThreadedWorker returns the appropriate
# one.
# It is tempting to put "if parallel_enable.enabled():..." but
# threadable can carry more options than just
# PARALLEL_THREADABLE and PARALLEL_UNTHREADABLE.
if (self.threadable is PARALLEL_UNTHREADABLE
and parallel_enable.enabled()):
workerclass = worker.ParallelWorker
elif (self.threadable is PARALLEL_THREADABLE
and parallel_enable.enabled()):
if thread_enable.enabled():
workerclass = worker.getThreadedParallelWorker
else:
workerclass = worker.ParallelWorker
elif (self.threadable is UNTHREADABLE or not thread_enable.enabled()
or (self.threadable is THREADABLE_GUI and not guitop.top())
or (self.threadable is THREADABLE_TEXT and guitop.top())):
workerclass = worker.NonThreadedWorker
else:
# worker.getThreadedWorker returns a
# TextThreadedWorker in text mode, and either a
# ThreadedWorker of GUIThreadedWorkerBlock in GUI
# mode.
workerclass = worker.getThreadedWorker
the_worker = workerclass(self, argtuple, argdict)
garbage.collect()
# Launch the thread (and wait for it to finish if in text
# mode).
the_worker.start()
def deleteLayer_gui(self, menuitem):
if self.selectedLayer is None:
guitop.top().message_out('No layer is selected!\n')
else:
self.suppressSelectionSignals()
try:
self.menu.Layer.Delete(n=self.layerID(self.selectedLayer))
finally:
self.allowSelectionSignals()
def deleteLayer_gui(self, menuitem):
if self.selectedLayer is None:
guitop.top().message_out('No layer is selected!\n')
else:
self.suppressSelectionSignals()
try:
self.menu.Layer.Delete(n=self.layerID(self.selectedLayer))
finally:
self.allowSelectionSignals()
def __init__(self, pixelinfotoolbox):
debug.mainthreadTest()
toolboxGUI.GfxToolbox.__init__(self, "Pixel Info", pixelinfotoolbox)
mainbox = gtk.VBox()
self.gtk.add(mainbox)
self.table = gtk.Table(rows=3, columns=2)
mainbox.pack_start(self.table, expand=0, fill=0)
label = gtk.Label('x=')
label.set_alignment(1.0, 0.5)
self.table.attach(label, 0,1, 0,1, xpadding=5, xoptions=gtk.FILL)
self.xtext = gtk.Entry()
gtklogger.setWidgetName(self.xtext, "X")
self.xtext.set_size_request(10*guitop.top().digitsize, -1)
self.table.attach(self.xtext, 1,2, 0,1,
xpadding=5, xoptions=gtk.EXPAND|gtk.FILL)
label = gtk.Label('y=')
label.set_alignment(1.0, 0.5)
self.table.attach(label, 0,1, 1,2, xpadding=5, xoptions=gtk.FILL)
self.ytext = gtk.Entry()
gtklogger.setWidgetName(self.ytext, "Y")
self.ytext.set_size_request(10*guitop.top().digitsize, -1)
self.table.attach(self.ytext, 1,2, 1,2,
xpadding=5, xoptions=gtk.EXPAND|gtk.FILL)
self.xtsignal = gtklogger.connect(self.xtext, 'changed',
self.pointChanged)
self.ytsignal = gtklogger.connect(self.ytext, 'changed',
self.pointChanged)
box = gtk.HBox(homogeneous=True, spacing=2)
self.updatebutton = gtkutils.StockButton(gtk.STOCK_REFRESH, 'Update')
box.pack_start(self.updatebutton, expand=1, fill=1)
gtklogger.setWidgetName(self.updatebutton, "Update")
gtklogger.connect(self.updatebutton, 'clicked', self.updateButtonCB)
self.clearbutton = gtkutils.StockButton(gtk.STOCK_CLEAR, 'Clear')
box.pack_start(self.clearbutton, expand=1, fill=1)
gtklogger.setWidgetName(self.clearbutton, "Clear")
gtklogger.connect(self.clearbutton, 'clicked', self.clearButtonCB)
self.table.attach(box, 0,2, 2,3,
xpadding=5, xoptions=gtk.EXPAND|gtk.FILL, yoptions=0)
self.updatebutton.set_sensitive(0)
self.clearbutton.set_sensitive(0)
self.buildGUI()
self.sbcallbacks = [
switchboard.requestCallbackMain(pixelinfotoolbox,
self.update),
switchboard.requestCallbackMain('new pixelinfo plugin',
self.buildGUI),
switchboard.requestCallbackMain((self.gfxwindow(),
'layers changed'), self.update)
]
def __init__(self, toolbox, table, row):
debug.mainthreadTest()
PixelInfoPlugIn.__init__(self, toolbox)
label = gtk.Label('microstructure=')
label.set_alignment(1.0, 0.5)
table.attach(label, 0, 1, row, row + 1, xpadding=5, xoptions=gtk.FILL)
self.microtext = gtk.Entry()
gtklogger.setWidgetName(self.microtext, 'MSText')
self.microtext.set_size_request(12 * guitop.top().charsize, -1)
self.microtext.set_editable(0)
table.attach(self.microtext,
1,
2,
row,
row + 1,
xpadding=5,
xoptions=gtk.EXPAND | gtk.FILL)
label = gtk.Label('pixel groups=')
label.set_alignment(1.0, 0.5)
table.attach(label,
0,
1,
row + 1,
row + 2,
xpadding=5,
xoptions=gtk.FILL)
self.grouplist = gtk.TextView()
self.grouplist.set_size_request(12 * guitop.top().charsize, -1)
self.grouplist.set_editable(False)
self.grouplist.set_cursor_visible(False)
self.grouplist.set_wrap_mode(gtk.WRAP_WORD)
gtklogger.setWidgetName(self.grouplist, 'Group view')
scroll = gtk.ScrolledWindow()
gtklogger.logScrollBars(scroll, "MSScroll")
scroll.set_shadow_type(gtk.SHADOW_IN)
scroll.set_policy(gtk.POLICY_AUTOMATIC, gtk.POLICY_AUTOMATIC)
scroll.add(self.grouplist)
table.attach(scroll,
1,
2,
row + 1,
row + 2,
xpadding=5,
xoptions=gtk.EXPAND | gtk.FILL)
self.sbcallbacks = [
switchboard.requestCallbackMain('changed pixel group',
self.grpchanged),
switchboard.requestCallbackMain('changed pixel groups',
self.grpschngd),
switchboard.requestCallbackMain('destroy pixel group',
self.grpdestroy),
switchboard.requestCallbackMain('renamed pixel group',
self.grprenamed)
]
def entrymaster(self, column, row, editable=0):
debug.mainthreadTest()
entry = gtk.Entry()
entry.set_size_request(13*guitop.top().digitsize, -1)
entry.set_editable(editable)
self.table.attach(entry, column[0],column[1], row[0],row[1],
xpadding=xpadding, xoptions=xoptions)
return entry
def copyinitCB(self, button): # gtk callback, copy field initializer
menuitem = meshmenu.Copy_Field_Initializers
targetparam = menuitem.get_arg("target")
targetparam.set(self.currentFullMeshName())
if parameterwidgets.getParameters(targetparam,
parentwindow=guitop.top().gtk,
title="Select a target Mesh"):
menuitem.callWithDefaults(source=self.currentFullMeshName())
def entrymaster(self, column, row, editable=0):
debug.mainthreadTest()
entry = gtk.Entry()
entry.set_size_request(12*guitop.top().digitsize, -1)
entry.set_editable(editable)
self.table.attach(entry, column[0],column[1], row[0],row[1],
xpadding=xpadding, xoptions=gtk.EXPAND|gtk.FILL)
return entry
def copyinitCB(self, button): # gtk callback, copy field initializers
menuitem = meshmenu.Copy_Field_Initializers
targetparam = menuitem.get_arg("target")
targetparam.set(self.currentFullMeshName())
if parameterwidgets.getParameters(targetparam,
parentwindow=guitop.top().gtk,
title="Select a target Mesh"):
menuitem.callWithDefaults(source=self.currentFullMeshName())
def __init__(self, param, scope=None, name=None, compact=False):
GenericWidget.__init__(self,
param=param,
scope=scope,
name=name,
compact=compact)
if compact:
self.gtk.set_size_request(8 * guitop.top().digitsize, -1)
def __init__(self, param, scope=None, name=None):
debug.mainthreadTest()
widget = gtk.Entry()
widget.set_size_request(10 * guitop.top().charsize, -1)
ParameterWidget.__init__(self, widget, scope=scope, name=name)
self.signal = gtklogger.connect(widget, 'changed', self.changedCB)
self.set_value(param.value)
self.widgetChanged(self.validValue(param.value), interactive=0)
def __init__(self, param, scope=None, name=None):
debug.mainthreadTest()
widget = gtk.Entry()
widget.set_size_request(10*guitop.top().charsize, -1)
ParameterWidget.__init__(self, widget, scope=scope, name=name)
self.signal = gtklogger.connect(widget, 'changed', self.changedCB)
self.set_value(param.value)
self.widgetChanged(self.validValue(param.value), interactive=0)
def newOutputCB(self, gtkbutton):
# Create a new scheduled output
menuitem = outputmenu.New
params = filter(lambda a: a.name != 'mesh', menuitem.params)
if parameterwidgets.getParameters(title='Define a new Output',
scope=self,
parentwindow=guitop.top().gtk,
*params):
menuitem.callWithDefaults(mesh=self.currentFullMeshName())
def newOutputCB(self, gtkbutton):
# Create a new scheduled output
menuitem = outputmenu.New
params = filter(lambda a: a.name != 'mesh', menuitem.params)
if parameterwidgets.getParameters(title='Define a new Output',
scope=self,
parentwindow=guitop.top().gtk,
*params):
menuitem.callWithDefaults(mesh=self.currentFullMeshName())
def __init__(self,
value=None,
vmin=0,
vmax=1,
step=0.01,
callback=None,
clipperclass=None,
name=None,
immediate=True):
# "callback" is called when the user moves the slider. If
# immediate==True, then the callback will be called when any
# character is typed in the Entry. If it's false, the
# callback won't be called until the entry loses focus.
debug.mainthreadTest()
self.immediate = immediate
self.gtk = gtk.HPaned()
if value is None:
value = vmin
self.clipperclass = clipperclass or DefaultClipper
self.clipper = self.clipperclass(vmin, vmax)
if name is not None:
gtklogger.setWidgetName(self.gtk, name)
self.adjustment = gtk.Adjustment(value=value,
lower=vmin,
upper=vmax,
step_incr=step,
page_incr=step)
self.slider = gtk.HScale(self.adjustment)
gtklogger.setWidgetName(self.slider, "slider")
gtklogger.adoptGObject(self.adjustment,
self.slider,
access_method=self.slider.get_adjustment)
self.slider.set_size_request(100, -1)
self.gtk.pack1(self.slider, resize=True, shrink=True)
self.slider.set_draw_value(False) # we'll display the value ourselves
self.adjustmentsignal = gtklogger.connect(self.adjustment,
'value-changed',
self.text_from_slider)
self.entry = gtk.Entry()
gtklogger.setWidgetName(self.entry, "entry")
self.gtk.pack2(self.entry, resize=True, shrink=True)
# Make sure that the Entry is big enough to hold the min and
# max values, or at least 8 digits.
width = max(len( ` vmin `), len( ` vmax `), 8)
self.entry.set_size_request(width * guitop.top().digitsize, -1)
self.entrysignal = gtklogger.connect(self.entry, 'changed',
self.entry_changed)
self.set_value(value)
self.callback = callback
self.changed = False
gtklogger.connect(self.entry, 'activate', self.slider_from_text)
gtklogger.connect(self.entry, 'focus-out-event', self.entry_lost_focus)
def renameCB(self, gtkbutton):
menuitem = outputmenu.Rename
nameparam = menuitem.get_arg('name')
name = self.currentOutputName()
nameparam.set(name)
if parameterwidgets.getParameters(nameparam,
title='Rename output "%s"' % name,
scope=self,
parentwindow=guitop.top().gtk):
menuitem.callWithDefaults(mesh=self.currentFullMeshName(),
output=self.currentOutputName())
def renameCB(self, gtkbutton):
menuitem = outputmenu.Rename
nameparam = menuitem.get_arg('name')
name = self.currentOutputName()
nameparam.set(name)
if parameterwidgets.getParameters(nameparam,
title='Rename output "%s"'%name,
scope=self,
parentwindow=guitop.top().gtk):
menuitem.callWithDefaults(mesh=self.currentFullMeshName(),
output=self.currentOutputName())
def setSolverCB(self, *args): # gtk callback
menuitem = subpmenu.Set_Solver
subp = self.currentSubProblemContext()
mode_arg = menuitem.get_arg('solver_mode')
mode_arg.set(subp.solver_mode)
if parameterwidgets.getParameters(mode_arg,
title='Specify Solver',
parentwindow=guitop.top().gtk,
scope=self):
menuitem.callWithDefaults(
subproblem=self.currentFullSubProblemName())
def copySchedCB(self, gtkbutton):
menuitem = outputmenu.Schedule.Copy
targetmeshparam = menuitem.get_arg('targetmesh')
targetmeshparam.set(self.currentFullMeshName())
targetparam = menuitem.get_arg('target')
if parameterwidgets.getParameters(targetmeshparam, targetparam,
parentwindow=guitop.top().gtk,
title="Copy an Output Schedule",
scope=self):
menuitem.callWithDefaults(mesh=self.currentFullMeshName(),
source=self.currentOutputName())
def setSolverCB(self, *args): # gtk callback
menuitem = subpmenu.Set_Solver
subp = self.currentSubProblemContext()
mode_arg = menuitem.get_arg('solver_mode')
mode_arg.set(subp.solver_mode)
if parameterwidgets.getParameters(mode_arg,
title='Specify Solver',
parentwindow=guitop.top().gtk,
scope=self):
menuitem.callWithDefaults(
subproblem=self.currentFullSubProblemName())
def copyOutputCB(self, gtkbutton):
menuitem = outputmenu.Copy
output = self.currentOutput()
targetmeshparam = menuitem.get_arg('targetmesh')
targetmeshparam.set(self.currentFullMeshName())
if parameterwidgets.getParameters(targetmeshparam,
menuitem.get_arg('copy'),
scope=self,
title="Copy an Output",
parentwindow=guitop.top().gtk):
menuitem.callWithDefaults(mesh=self.currentFullMeshName(),
source=self.currentOutputName())
def setDestinationCB(self, *args):
assert self.currentOutput() is not None
menuitem = outputmenu.Destination.Set
destparam = menuitem.get_arg('destination')
if self.currentOutput().destination is not None:
destparam.set(self.currentOutput().destination)
if parameterwidgets.getParameters(destparam,
parentwindow=guitop.top().gtk,
title='Set an Output Destination',
scope=self):
menuitem.callWithDefaults(mesh=self.currentFullMeshName(),
output=self.currentOutputName())
def copyOutputCB(self, gtkbutton):
menuitem = outputmenu.Copy
output = self.currentOutput()
targetmeshparam = menuitem.get_arg('targetmesh')
targetmeshparam.set(self.currentFullMeshName())
if parameterwidgets.getParameters(targetmeshparam,
menuitem.get_arg('copy'),
scope=self,
title="Copy an Output",
parentwindow=guitop.top().gtk):
menuitem.callWithDefaults(mesh=self.currentFullMeshName(),
source=self.currentOutputName())
def copySchedCB(self, gtkbutton):
menuitem = outputmenu.Schedule.Copy
targetmeshparam = menuitem.get_arg('targetmesh')
targetmeshparam.set(self.currentFullMeshName())
targetparam = menuitem.get_arg('target')
if parameterwidgets.getParameters(targetmeshparam,
targetparam,
parentwindow=guitop.top().gtk,
title="Copy an Output Schedule",
scope=self):
menuitem.callWithDefaults(mesh=self.currentFullMeshName(),
source=self.currentOutputName())
def __init__(self, question, *answers, **kwargs):
debug.mainthreadTest()
if len(answers) == 0:
raise ooferror.ErrSetupError(
"Questioner must have at least one possible answer.")
self.answers = answers
self.gtk = gtklogger.Dialog(parent=guitop.top().gtk)
gtklogger.newTopLevelWidget(self.gtk, "Questioner")
hbox = gtk.HBox()
self.gtk.vbox.pack_start(hbox, padding=15)
hbox.pack_start(gtk.Label(question), padding=15)
self.defaultbutton = None
try:
self.default = kwargs['default']
except KeyError:
self.default = None
else:
if not self.default in answers:
self.answers = (self.default, ) + answers
self.answerdict = {}
count = 1
for answer in self.answers:
#TODO:Replace the try except block with this
#stock = answer["stock"]
#choice = answer["choice"]
#icon = gtk.stock_lookup(stock)
#if icon is None:
# debug.fmsg('no gtk stock icon for id: ', stock)
# self.gtk.add_button(choice, count)
#else:
# button = self.gtk.add_button(icon, count)
# label = gtkutils.findChild(gtk.Label, button)
# label.set_text(choice)
#if answer["stock"] == self.default["stock"]:
# self.gtk.set_default_response(count)
try:
stock = _stock[answer]
button = self.gtk.add_button(stock, count)
# Replace the label on the stock button with the answer text.
label = gtkutils.findChild(gtk.Label, button)
label.set_text(answer)
except KeyError:
debug.fmsg('no stock icon for', answer)
self.gtk.add_button(answer, count)
self.answerdict[count] = answer
if answer == self.default:
self.gtk.set_default_response(count)
count += 1
hbox.show_all()
def setDestinationCB(self, *args):
assert self.currentOutput() is not None
menuitem = outputmenu.Destination.Set
destparam = menuitem.get_arg('destination')
if self.currentOutput().destination is not None:
destparam.set(self.currentOutput().destination)
if parameterwidgets.getParameters(destparam,
parentwindow=guitop.top().gtk,
title='Set an Output Destination',
scope=self):
menuitem.callWithDefaults(mesh=self.currentFullMeshName(),
output=self.currentOutputName())
def __init__(self, toolbox, table, row):
debug.mainthreadTest()
PixelInfoPlugIn.__init__(self, toolbox)
label = gtk.Label('microstructure=')
label.set_alignment(1.0, 0.5)
table.attach(label, 0,1, row,row+1, xpadding=5, xoptions=gtk.FILL)
self.microtext = gtk.Entry()
gtklogger.setWidgetName(self.microtext,'MSText')
self.microtext.set_size_request(12*guitop.top().charsize, -1)
self.microtext.set_editable(0)
table.attach(self.microtext, 1,2, row,row+1,
xpadding=5, xoptions=gtk.EXPAND|gtk.FILL)
label = gtk.Label('pixel groups=')
label.set_alignment(1.0, 0.5)
table.attach(label, 0,1, row+1,row+2, xpadding=5, xoptions=gtk.FILL)
self.grouplist = gtk.TextView()
self.grouplist.set_size_request(12*guitop.top().charsize, -1)
self.grouplist.set_editable(False)
self.grouplist.set_cursor_visible(False)
self.grouplist.set_wrap_mode(gtk.WRAP_WORD)
gtklogger.setWidgetName(self.grouplist, 'Group view')
scroll = gtk.ScrolledWindow()
gtklogger.logScrollBars(scroll, "MSScroll")
scroll.set_shadow_type(gtk.SHADOW_IN)
scroll.set_policy(gtk.POLICY_AUTOMATIC, gtk.POLICY_AUTOMATIC)
scroll.add(self.grouplist)
table.attach(scroll, 1,2, row+1,row+2,
xpadding=5, xoptions=gtk.EXPAND|gtk.FILL)
self.sbcallbacks = [
switchboard.requestCallbackMain('changed pixel group',
self.grpchanged),
switchboard.requestCallbackMain('changed pixel groups',
self.grpschngd),
switchboard.requestCallbackMain('destroy pixel group',
self.grpdestroy),
switchboard.requestCallbackMain('renamed pixel group',
self.grprenamed)
]
def editOutputCB(self, *args):
menuitem = outputmenu.Edit
output = self.currentOutput()
newoutputparam = menuitem.get_arg('new_output')
newoutputparam.set(output)
params = filter(lambda a: a.name not in ('mesh', 'output'),
menuitem.params)
if parameterwidgets.getParameters(title='Redefine an Output',
scope=self,
parentwindow=guitop.top().gtk,
*params):
menuitem.callWithDefaults(mesh=self.currentFullMeshName(),
output=self.currentOutputName())
def _append(self, type, *args):
message = string.join([str(x) for x in args], ' ')
MessageManager.lock.acquire()
try:
if debug.debug() and type!="Log" and guitop.top():
print message
self.message_list.append( (message, type) )
if self.flag_dict[type]:
self._write(message)
finally:
MessageManager.lock.release()
switchboard.notify( "write message", (message, type) )
return message
def editOutputCB(self, *args):
menuitem = outputmenu.Edit
output = self.currentOutput()
newoutputparam = menuitem.get_arg('new_output')
newoutputparam.set(output)
params = filter(lambda a: a.name not in ('mesh', 'output'),
menuitem.params)
if parameterwidgets.getParameters(title='Redefine an Output',
scope=self,
parentwindow=guitop.top().gtk,
*params):
menuitem.callWithDefaults(mesh=self.currentFullMeshName(),
output=self.currentOutputName())
def setSchedCB(self, *args):
menuitem = outputmenu.Schedule.Set
schedparam = menuitem.get_arg('schedule')
schedtypeparam = menuitem.get_arg('scheduletype')
if self.currentOutput().schedule is not None:
schedparam.set(self.currentOutput().schedule)
schedtypeparam.set(self.currentOutput().scheduleType)
if parameterwidgets.getParameters(schedtypeparam, schedparam,
parentwindow=guitop.top().gtk,
title='Set an Output Schedule',
scope=self):
menuitem.callWithDefaults(mesh=self.currentFullMeshName(),
output=self.currentOutputName())
def _append(self, type, *args):
message = ' '.join([str(x) for x in args])
self.lock.acquire()
try:
if debug.debug() and type!="Log" and guitop.top():
print message
self.message_list.append( (message, type) )
if self.flag_dict[type]:
self._write(message)
finally:
self.lock.release()
switchboard.notify( "write message", (message, type) )
return message
def setSchedCB(self, *args):
menuitem = outputmenu.Schedule.Set
schedparam = menuitem.get_arg('schedule')
schedtypeparam = menuitem.get_arg('scheduletype')
if self.currentOutput().schedule is not None:
schedparam.set(self.currentOutput().schedule)
schedtypeparam.set(self.currentOutput().scheduleType)
if parameterwidgets.getParameters(schedtypeparam,
schedparam,
parentwindow=guitop.top().gtk,
title='Set an Output Schedule',
scope=self):
menuitem.callWithDefaults(mesh=self.currentFullMeshName(),
output=self.currentOutputName())
def hireWorker(self, argtuple=(), argdict={}, workerclass=None):
# Create and start the appropriate kind of Worker to perform
# the menu item. If menuItem is threadable create a threaded
# Worker and launch the thread. There are different kinds of
# threaded Workers. getThreadedWorker returns the appropriate
# one.
if workerclass is None: # TODO: Is the workerclass arg ever not None?
# It is tempting to put "if parallel_enable.enabled():..." but
# threadable can carry more options than just
# PARALLEL_THREADABLE and PARALLEL_UNTHREADABLE.
if (self.threadable is PARALLEL_UNTHREADABLE and
parallel_enable.enabled()):
workerclass = worker.ParallelWorker
elif (self.threadable is PARALLEL_THREADABLE and
parallel_enable.enabled()):
if thread_enable.enabled():
workerclass = worker.getThreadedParallelWorker
else:
workerclass = worker.ParallelWorker
elif (self.threadable is UNTHREADABLE or
not thread_enable.enabled() or
(self.threadable is THREADABLE_GUI and not guitop.top()) or
(self.threadable is THREADABLE_TEXT and guitop.top())
):
workerclass = worker.NonThreadedWorker
else:
# worker.getThreadedWorker returns a
# TextThreadedWorker in text mode, and either a
# ThreadedWorker of GUIThreadedWorkerBlock in GUI
# mode.
workerclass = worker.getThreadedWorker
the_worker = workerclass(self, argtuple, argdict)
garbage.collect()
# Launch the thread (and wait for it to finish if in text
# mode).
the_worker.start()
def __init__(self, toolbox, table, row):
debug.mainthreadTest()
pixelinfoplugin.PixelInfoPlugIn.__init__(self, toolbox)
label=gtk.Label('material=')
label.set_alignment(1.0, 0.5)
table.attach(label, 0,1, row,row+1, xpadding=5, xoptions=gtk.FILL)
self.materialtext = gtk.Entry()
gtklogger.setWidgetName(self.materialtext, 'material')
self.materialtext.set_size_request(12*guitop.top().charsize, -1)
self.materialtext.set_editable(0)
table.attach(self.materialtext, 1,2, row,row+1,
xpadding=5, xoptions=gtk.EXPAND|gtk.FILL)
self.sbcb = switchboard.requestCallbackMain(
'materials changed in microstructure', self.matchanged)
def __init__(self, toolbox, table, row):
debug.mainthreadTest()
pixelinfoplugin.PixelInfoPlugIn.__init__(self, toolbox)
label=gtk.Label('material=')
label.set_alignment(1.0, 0.5)
table.attach(label, 0,1, row,row+1, xpadding=5, xoptions=gtk.FILL)
self.materialtext = gtk.Entry()
gtklogger.setWidgetName(self.materialtext, 'material')
self.materialtext.set_size_request(12*guitop.top().charsize, -1)
self.materialtext.set_editable(0)
table.attach(self.materialtext, 1,2, row,row+1,
xpadding=5, xoptions=gtk.EXPAND|gtk.FILL)
self.sbcb = switchboard.requestCallbackMain(
'materials changed in microstructure', self.matchanged)
def __init__(self,label,rows,cols,value=None,scope=None,name=None):
debug.mainthreadTest()
frame = gtk.Frame()
self.table = gtk.Table(rows=rows+1, columns=cols+1)
frame.add(self.table)
parameterwidgets.ParameterWidget.__init__(self, frame, scope, name)
widgetscope.WidgetScope.__init__(self, scope)
#scope.addWidget(self)
self.rows = rows
self.cols = cols
self.floats = {}
self.sbcallbacks = []
#
#self.table = gtk.GtkTable(rows=self.rows+2,cols=self.cols+2)
#
# Do labels first.
for r in range(self.rows):
lbl = gtk.Label(' %d ' % (r+1))
lbl.set_alignment(1.0, 0.5)
self.table.attach(lbl,0,1,r+1,r+2)
for c in range(self.cols):
lbl = gtk.Label(`c+1`)
self.table.attach(lbl,c+1,c+2,0,1)
digitsize = guitop.top().digitsize
# Now put the actual floats in.
for r in range(self.rows):
for c in range(r,self.cols):
newfloat = parameterwidgets.FloatWidget(
parameter.FloatParameter('dummy',0.0),
scope=self,
name="%d,%d"%(r,c))
self.sbcallbacks.append(
switchboard.requestCallbackMain(newfloat,
self.floatChangeCB))
# Also, set the size -- otherwise, the matrix
# array gets to be too big.
newfloat.gtk.set_size_request(8*digitsize,-1)
self.floats[(r,c)] = newfloat
try:
self.floats[(r,c)].set_value(value[(r,c)])
except:
pass
self.table.attach(newfloat.gtk,c+1,c+2,r+1,r+2,
xoptions=gtk.FILL)
self.widgetChanged(1, interactive=0)
def _updatePBdisplayNow(progressid):
debug.mainthreadTest()
# Don't do anything unless threads are enabled and the gui has
# been started.
if thread_enable.query() and guitop.top():
prog = progress.findProgressByID(progressid)
if prog is not None and not (prog.finished() or prog.stopped()):
# Create just one activity viewer. If it's been opened
# and closed already, don't reopen it automatically.
if not _activityViewerOpened:
# The newly created Activity Viewer window
# automatically calls installBar for every existing
# Progress object, including the one identified by the
# argument to this routine.
openActivityViewer()
else:
# The Activity Viewer might have been closed, in which
# case activityViewer is None.
if activityViewer is not None:
activityViewer.addGTKBar(prog)
def _updatePBdisplayNow(progressid):
debug.mainthreadTest()
# Don't do anything unless threads are enabled and the gui has
# been started.
if thread_enable.query() and guitop.top():
prog = progress.findProgressByID(progressid)
if prog is not None and not (prog.finished() or prog.stopped()):
# Create just one activity viewer. If it's been opened
# and closed already, don't reopen it automatically.
if not _activityViewerOpened:
# The newly created Activity Viewer window
# automatically calls installBar for every existing
# Progress object, including the one identified by the
# argument to this routine.
openActivityViewer()
else:
# The Activity Viewer might have been closed, in which
# case activityViewer is None.
if activityViewer is not None:
activityViewer.addGTKBar(prog)
def __init__(self, question, *answers, **kwargs):
debug.mainthreadTest()
if len(answers)==0:
raise ooferror.ErrSetupError(
"Questioner must have at least one possible answer.")
self.answers = answers
self.gtk = gtklogger.Dialog(parent=guitop.top().gtk)
gtklogger.newTopLevelWidget(self.gtk, "Questioner")
hbox = gtk.HBox()
self.gtk.vbox.pack_start(hbox, padding=15)
hbox.pack_start(gtk.Label(question), padding=15)
self.defaultbutton = None
try:
self.default = kwargs['default']
except KeyError:
self.default=None
else:
if not self.default in answers:
self.answers = (self.default,)+answers
self.answerdict = {}
count = 1
for answer in self.answers:
try:
stock = _stock[answer]
button = self.gtk.add_button(stock, count)
# Replace the label on the stock button with the answer text.
label = gtkutils.findChild(gtk.Label, button)
label.set_text(answer)
except KeyError:
debug.fmsg('no stock icon for', answer)
self.gtk.add_button(answer, count)
self.answerdict[count] = answer
if answer == self.default:
self.gtk.set_default_response(count)
count += 1
hbox.show_all()
def rebuildFieldTable(self, nfieldrows, listedfields):
for entry in self.fieldvalEntries.values():
entry.destroy()
for widget in self.fieldvalWidgets:
widget.destroy()
self.fieldvalEntries.clear()
self.fieldvalWidgets.clear()
self.table.resize(rows=self.baserows + nfieldrows, columns=3)
frow = self.baserows # starting row for a field
for fld in listedfields:
sep = gtk.HSeparator()
self.fieldvalWidgets.add(sep)
self.table.attach(sep, 0, 3, frow, frow + 1, xoptions=gtk.FILL)
frow += 1
label = gtk.Label(fld.name())
label.set_alignment(1.0, 0.5)
self.fieldvalWidgets.add(label)
self.table.attach(label, 0, 1, frow, frow + fld.ndof(), xoptions=0)
fcomp = fld.iterator(planarity.ALL_INDICES)
while not fcomp.end():
row = frow + fcomp.integer()
label = gtk.Label(" " + fcomp.shortrepr() + "=")
self.fieldvalWidgets.add(label)
self.table.attach(label, 1, 2, row, row + 1, xoptions=gtk.FILL)
e = gtk.Entry()
e.set_size_request(10 * guitop.top().charsize, -1)
e.set_editable(False)
self.fieldvalEntries[(fld, fcomp.integer())] = e
self.table.attach(e,
2,
3,
row,
row + 1,
xoptions=gtk.EXPAND | gtk.FILL)
fcomp.next()
frow += fld.ndof()
# end loop over listedfields
self.table.show_all()
self.fieldslisted = listedfields
def __init__(self, value=None, vmin=0, vmax=1, step=0.01, callback=None, name=None, immediate=True):
# "callback" is called when the user moves the slider. If
# immediate==True, then the callback will be called when any
# character is typed in the Entry. If it's false, the
# callback won't be called until the entry loses focus.
debug.mainthreadTest()
self.immediate = immediate
self.gtk = gtk.HPaned()
if value is None:
value = vmin
if name is not None:
gtklogger.setWidgetName(self.gtk, name)
self.adjustment = gtk.Adjustment(value=value, lower=vmin, upper=vmax, step_incr=step, page_incr=step)
self.slider = gtk.HScale(self.adjustment)
gtklogger.setWidgetName(self.slider, "slider")
gtklogger.adoptGObject(self.adjustment, self.slider, access_method=self.slider.get_adjustment)
self.slider.set_size_request(100, -1)
self.gtk.pack1(self.slider, resize=True, shrink=True)
self.slider.set_draw_value(False) # we'll display the value ourselves
self.adjustmentsignal = gtklogger.connect(self.adjustment, "value-changed", self.text_from_slider)
self.entry = gtk.Entry()
gtklogger.setWidgetName(self.entry, "entry")
self.gtk.pack2(self.entry, resize=True, shrink=True)
# Make sure that the Entry is big enough to hold the min and
# max values, or at least 8 digits.
width = max(len(` vmin `), len(` vmax `), 8)
self.entry.set_size_request(width * guitop.top().digitsize, -1)
self.entrysignal = gtklogger.connect(self.entry, "changed", self.entry_changed)
self.set_value(value)
self.callback = callback
self.changed = False
gtklogger.connect(self.entry, "activate", self.slider_from_text)
gtklogger.connect(self.entry, "focus-out-event", self.entry_lost_focus)
def update(self, namelist, helpdict={}):
debug.mainthreadTest()
# Replace the widget's list of names with the given list. The
# original value of self.current_string will be restored if it
# still exists in the updated namelist.
try:
current_index = namelist.index(self.current_string)
except ValueError:
if len(namelist) > 0:
current_index = 0
else:
current_index = -1 # no selection
self.helpdict = helpdict
self.suppress_signals()
liststore = self.combobox.get_model()
liststore.clear()
for name in namelist:
liststore.append([name])
self.combobox.set_active(current_index)
if current_index >= 0:
self.current_string = liststore[current_index][0]
else:
self.current_string = None
self.allow_signals()
self.set_tooltip()
if self.update_callback:
self.update_callback(*(self.gtk, self.current_string) +
self.update_callback_args)
self.combobox.set_sensitive(len(namelist) > 0)
# Make the widget wide enough to fit the longest name it
# might display, plus some extra space for the arrow
# decoration.
if namelist:
maxlen = max([len(name) for name in namelist])
self.combobox.set_size_request(30 + maxlen * guitop.top().charsize,
-1)
def update(self, namelist, helpdict={}):
debug.mainthreadTest()
# Replace the widget's list of names with the given list. The
# original value of self.current_string will be restored if it
# still exists in the updated namelist.
try:
current_index = namelist.index(self.current_string)
except ValueError:
if len(namelist) > 0:
current_index = 0
else:
current_index = -1 # no selection
self.helpdict = helpdict
self.suppress_signals()
liststore = self.combobox.get_model()
liststore.clear()
for name in namelist:
liststore.append([name])
self.combobox.set_active(current_index)
if current_index >= 0:
self.current_string = liststore[current_index][0]
else:
self.current_string = None
self.allow_signals()
self.set_tooltip()
if self.update_callback:
self.update_callback(*(self.gtk, self.current_string)+
self.update_callback_args)
self.combobox.set_sensitive(len(namelist) > 0)
# Make the widget wide enough to fit the longest name it
# might display, plus some extra space for the arrow
# decoration.
if namelist:
maxlen = max([len(name) for name in namelist])
self.combobox.set_size_request(30+maxlen*guitop.top().charsize, -1)
def __init__(self, name, ordering, tip=None):
debug.mainthreadTest()
widgetscope.WidgetScope.__init__(self, parent=gui)
self.name = name
self.ordering = ordering
self.tip = tip
self.gtk = gtk.Frame()
self.gtk.set_shadow_type(gtk.SHADOW_NONE)
# Insert the page in the proper spot
for i in range(len(pagenames)):
if self.ordering < allPages[pagenames[i]].ordering:
pagenames.insert(i, name)
if guitop.top(): # gui may not be constructed yet!
guitop.top().addPage(self, i)
break
else: # page goes at the end
pagenames.append(name)
if guitop.top(): # gui may not be constructed yet!
guitop.top().addPage(self, len(pagenames))
allPages[name] = self
gtklogger.setWidgetName(self.gtk, name + " Page")
def __init__(self, name, ordering, tip=None):
debug.mainthreadTest()
widgetscope.WidgetScope.__init__(self, parent=gui)
self.name = name
self.ordering = ordering
self.tip = tip
self.gtk = gtk.Frame()
self.gtk.set_shadow_type(gtk.SHADOW_NONE)
# Insert the page in the proper spot
for i in range(len(pagenames)):
if self.ordering < allPages[pagenames[i]].ordering:
pagenames.insert(i, name)
if guitop.top(): # gui may not be constructed yet!
guitop.top().addPage(self, i)
break
else: # page goes at the end
pagenames.append(name)
if guitop.top(): # gui may not be constructed yet!
guitop.top().addPage(self, len(pagenames))
allPages[name] = self
gtklogger.setWidgetName(self.gtk, name + ' Page')
def __init__(self, pixelinfotoolbox):
debug.mainthreadTest()
toolboxGUI.GfxToolbox.__init__(self, "Pixel Info", pixelinfotoolbox)
mainbox = gtk.VBox()
self.gtk.add(mainbox)
self.table = gtk.Table(rows=3, columns=2)
mainbox.pack_start(self.table, expand=0, fill=0)
label = gtk.Label('x=')
label.set_alignment(1.0, 0.5)
self.table.attach(label, 0, 1, 0, 1, xpadding=5, xoptions=gtk.FILL)
self.xtext = gtk.Entry()
gtklogger.setWidgetName(self.xtext, "X")
self.xtext.set_size_request(10 * guitop.top().digitsize, -1)
self.table.attach(self.xtext,
1,
2,
0,
1,
xpadding=5,
xoptions=gtk.EXPAND | gtk.FILL)
label = gtk.Label('y=')
label.set_alignment(1.0, 0.5)
self.table.attach(label, 0, 1, 1, 2, xpadding=5, xoptions=gtk.FILL)
self.ytext = gtk.Entry()
gtklogger.setWidgetName(self.ytext, "Y")
self.ytext.set_size_request(10 * guitop.top().digitsize, -1)
self.table.attach(self.ytext,
1,
2,
1,
2,
xpadding=5,
xoptions=gtk.EXPAND | gtk.FILL)
self.xtsignal = gtklogger.connect(self.xtext, 'changed',
self.pointChanged)
self.ytsignal = gtklogger.connect(self.ytext, 'changed',
self.pointChanged)
box = gtk.HBox(homogeneous=True, spacing=2)
self.updatebutton = gtkutils.StockButton(gtk.STOCK_REFRESH, 'Update')
box.pack_start(self.updatebutton, expand=1, fill=1)
gtklogger.setWidgetName(self.updatebutton, "Update")
gtklogger.connect(self.updatebutton, 'clicked', self.updateButtonCB)
self.clearbutton = gtkutils.StockButton(gtk.STOCK_CLEAR, 'Clear')
box.pack_start(self.clearbutton, expand=1, fill=1)
gtklogger.setWidgetName(self.clearbutton, "Clear")
gtklogger.connect(self.clearbutton, 'clicked', self.clearButtonCB)
self.table.attach(box,
0,
2,
2,
3,
xpadding=5,
xoptions=gtk.EXPAND | gtk.FILL,
yoptions=0)
self.updatebutton.set_sensitive(0)
self.clearbutton.set_sensitive(0)
self.buildGUI()
self.sbcallbacks = [
switchboard.requestCallbackMain(pixelinfotoolbox, self.update),
switchboard.requestCallbackMain('new pixelinfo plugin',
self.buildGUI),
switchboard.requestCallbackMain(
(self.gfxwindow(), 'layers changed'), self.update)
]
def shutdown(exitstatus):
gui = guitop.top()
if gui:
gui.stop()
gui.destroy()
ooflib.common.quit.shutdown(exitstatus)
def __init__(self, title, menu=None, callback=None, guiloggable=True):
debug.mainthreadTest()
self.gtk = gtk.Window(gtk.WINDOW_TOPLEVEL)
self.gtk.set_title(title)
if guiloggable:
gtklogger.newTopLevelWidget(self.gtk, title)
gtklogger.connect_passive(self.gtk, 'delete-event')
gtklogger.connect_passive(self.gtk, 'configure-event')
self.mainbox = gtk.VBox()
self.gtk.add(self.mainbox)
# Checking the type is clumsy; the idea is that the caller
# must provide either the name for the auto-generated menu, or
# a menu to use instead. TODO LATER: It would be cleaner for
# the Layer Editor and the Activity Viewer if the SubWindow
# class could provide the window-specific (i.e "Close" and
# "Quit") menu items under "File" (creating it, if necessary,
# and prepending it to the passed-in menu) even when a menu is
# passed in. This would prevent duplication of effort by
# separate subclasses of subwindow.
if type(menu)==types.StringType:
# If no menu is provided, then build a non-logging local
# one with 'Close' and 'Quit'.
self.subwindow_menu = oofmenu.OOFMenuItem(
menu, secret=1, gui_only=1, no_log=1)
file_item = oofmenu.OOFMenuItem('File', gui_only=1, no_log=1)
self.subwindow_menu.addItem(file_item)
file_item.addItem(oofmenu.OOFMenuItem(
'Close', help="Close this window.",
callback=self.menu_close,
no_log=1, gui_only=1, accel='w'))
file_item.addItem(oofmenu.OOFMenuItem(
'Quit', gui_callback=quit.queryQuit,
no_log=1, gui_only=1,
help="Quit the OOF application.",
accel='q', threadable = oofmenu.UNTHREADABLE))
mainmenu.OOF.addItem(self.subwindow_menu)
self._local_menu = menu
elif isinstance(menu, oofmenu.OOFMenuItem):
self.subwindow_menu = menu
self._local_menu = None # Flag indicating menu was passed in.
else:
raise TypeError("Incorrect type passed as menu to SubWindow.")
# Build the menu bar and add it to the window.
## self.menu_bar = None
self.accel_group = gtk.AccelGroup()
self.gtk.add_accel_group(self.accel_group)
self.menu_bar = gfxmenu.gtkOOFMenuBar(
self.subwindow_menu, accelgroup=self.accel_group)
if guiloggable:
gtklogger.setWidgetName(self.menu_bar, "MenuBar")
self.mainbox.pack_start(self.menu_bar, fill=0, expand=0)
# Add the "Windows" menu to the bar.
self.windows_gtk_menu_item = gfxmenu.gtkOOFMenu(mainmenu.OOF.Windows,
self.accel_group)
self.menu_bar.append(self.windows_gtk_menu_item)
self.menu_bar.connect("destroy", self.menu_bar_destroyed)
if callback is None:
callback = self.destroySubWindow
top().gtk.connect("destroy", callback)
def __init__(self, toolbox, table, row):
debug.mainthreadTest()
pixelinfoplugin.PixelInfoPlugIn.__init__(self, toolbox)
# colorv is set by "update" and "nonsense", it can be None (no
# color), "Nonsense", or a color.Color object.
# Statefulness is needed to remain consistency when a user
# switches from RGB to HSV or vice versa.
self.colorv = None
label = gtk.Label('image=')
label.set_alignment(1.0, 0.5)
table.attach(label, 0, 1, row, row + 1, xpadding=5, xoptions=gtk.FILL)
self.imagetext = gtk.Entry()
gtklogger.setWidgetName(self.imagetext, "Image")
self.imagetext.set_size_request(12 * guitop.top().charsize, -1)
self.imagetext.set_editable(0)
table.attach(self.imagetext,
1,
2,
row,
row + 1,
xpadding=5,
xoptions=gtk.EXPAND | gtk.FILL)
selectorbox = gtk.HBox()
self.rgb_selector = gtk.RadioButton(group=None, label="RGB")
tooltips.set_tooltip_text(
self.rgb_selector, "View color values in Red-Green-Blue format.")
selectorbox.add(self.rgb_selector)
self.hsv_selector = gtk.RadioButton(group=self.rgb_selector,
label="HSV")
tooltips.set_tooltip_text(
self.hsv_selector,
"View color values in Hue-Saturation-Value format.")
selectorbox.add(self.hsv_selector)
self.rgb_selector.set_active(1) # Default.
# Because this is a two-element group of radio buttons, only
# need to connect to the toggle signal on one of the buttons.
# If more buttons get added, this strategy will fail.
gtklogger.setWidgetName(self.rgb_selector, "RGB selector")
# "toggle" signal is not actually logged.
# gtklogger.connect(self.rgb_selector, "toggled", self.selector_cb)
gtklogger.setWidgetName(self.hsv_selector, "HSV selector")
gtklogger.connect(self.rgb_selector, "clicked", self.selector_cb)
gtklogger.connect(self.hsv_selector, "clicked", self.selector_cb)
table.attach(selectorbox,
0,
2,
row + 1,
row + 2,
xoptions=gtk.EXPAND | gtk.FILL)
self.label1 = gtk.Label('red=')
self.label1.set_alignment(1.0, 0.5)
table.attach(self.label1,
0,
1,
row + 2,
row + 3,
xpadding=5,
xoptions=gtk.FILL)
self.text1 = gtk.Entry()
gtklogger.setWidgetName(self.text1, 'Text 1')
self.text1.set_size_request(10 * guitop.top().digitsize, -1)
self.text1.set_editable(0)
table.attach(self.text1,
1,
2,
row + 2,
row + 3,
xpadding=5,
xoptions=gtk.EXPAND | gtk.FILL)
self.label2 = gtk.Label('green=')
self.label2.set_alignment(1.0, 0.5)
table.attach(self.label2,
0,
1,
row + 3,
row + 4,
xpadding=5,
xoptions=gtk.FILL)
self.text2 = gtk.Entry()
gtklogger.setWidgetName(self.text2, 'Text 2')
self.text2.set_size_request(10 * guitop.top().digitsize, -1)
self.text2.set_editable(0)
table.attach(self.text2,
1,
2,
row + 3,
row + 4,
xpadding=5,
xoptions=gtk.EXPAND | gtk.FILL)
self.label3 = gtk.Label('blue=')
self.label3.set_alignment(1.0, 0.5)
table.attach(self.label3,
0,
1,
row + 4,
row + 5,
xpadding=5,
xoptions=gtk.FILL)
self.text3 = gtk.Entry()
gtklogger.setWidgetName(self.text3, 'Text 3')
self.text3.set_size_request(10 * guitop.top().digitsize, -1)
self.text3.set_editable(0)
table.attach(self.text3,
1,
2,
row + 4,
row + 5,
xpadding=5,
xoptions=gtk.EXPAND | gtk.FILL)
self.sbcallbacks = [
switchboard.requestCallbackMain('modified image',
self.image_changed)
]
def __init__thread(self, gfxwindow, time, position, output):
debug.mainthreadTest()
allMeshDataWindows.append(self)
widgetscope.WidgetScope.__init__(self, None)
current_count = MeshDataGUI.count
MeshDataGUI.count += 1
self._name = "Mesh_Data_%d" % current_count
self.output = output
self.time = time
self.position = position
self.sbcallbacks = []
self.gsbcallbacks = [] # callbacks from a specific gfx window
self.updateLock = lock.Lock()
self.outputparam = \
ooflib.engine.IO.output.AggregateOutputParameter('output')
# Although it's not displayed, we need a mesh widget in the
# widgetscope, or the OutputParameterWidget won't work.
# TODO LATER: Is this ugly, or what?
self.meshWidget = whowidget.WhoWidget(mesh.meshes, scope=self,
name="Godot")
self.gtk = gtk.Window(gtk.WINDOW_TOPLEVEL)
title = utils.underscore2space(self._name)
self.gtk.set_title(title)
gtklogger.newTopLevelWidget(self.gtk, title)
gtklogger.connect_passive(self.gtk, 'delete-event')
gtklogger.connect_passive(self.gtk, 'configure-event')
self.mainbox = gtk.VBox()
self.gtk.add(self.mainbox)
# Put this window into the Windows menu. The menu item can't
# be logged, since the creation and operation of the window
# aren't logged, so scripts shouldn't refer to it at all.
mainmenu.OOF.Windows.Mesh_Data.addItem(oofmenu.OOFMenuItem(
self._name,
no_log=1,
help="Raise Mesh Data window %d." % current_count,
threadable=oofmenu.UNTHREADABLE,
callback=self.raiseWindow))
expander = gtk.Expander("Source")
gtklogger.setWidgetName(expander, 'ViewSource')
gtklogger.connect_passive_after(expander, 'activate')
self.mainbox.pack_start(expander)
expander.set_expanded(1)
self.table = gtk.Table(rows=config.dimension()+4, columns=2)
expander.add(self.table)
label = gtk.Label("Source Window:")
label.set_alignment(1.0, 0.5)
self.table.attach(label, 0,1, 0,1, xpadding=3, xoptions=gtk.FILL)
tooltips.set_tooltip_text(label,
"Display data for mouse clicks in this Graphics window.")
self.gfxWindowChooser = chooser.ChooserWidget([],
callback=self.chooserCB,
name='GfxWindow')
self.table.attach(self.gfxWindowChooser.gtk, 1,2, 0,1,
xpadding=3, xoptions=gtk.EXPAND|gtk.FILL, yoptions=0)
label = gtk.Label("Mesh:")
label.set_alignment(1.0, 0.5)
self.table.attach(label, 0,1, 1,2,
xpadding=3, xoptions=gtk.FILL, yoptions=0)
tooltips.set_tooltip_text(label,"Data is displayed for values on this mesh.")
self.meshText = gtk.Entry()
gtklogger.setWidgetName(self.meshText, "meshname")
self.meshText.set_editable(False)
self.meshText.set_size_request(12*guitop.top().charsize, -1)
self.table.attach(self.meshText, 1,2, 1,2,
xpadding=3, xoptions=gtk.EXPAND|gtk.FILL, yoptions=0)
# Position controls
label = gtk.Label("position x:")
label.set_alignment(1.0, 0.5)
self.table.attach(label, 0,1, 2,3,
xpadding=3, xoptions=gtk.FILL, yoptions=0)
self.xText = gtk.Entry()
gtklogger.setWidgetName(self.xText, 'x')
self.xText.set_size_request(12*guitop.top().digitsize, -1)
self.table.attach(self.xText, 1,2, 2,3,
xpadding=3, xoptions=gtk.EXPAND|gtk.FILL, yoptions=0)
self.xsignal = gtklogger.connect(self.xText, 'changed',
self.posChangedCB)
label = gtk.Label("position y:")
label.set_alignment(1.0, 0.5)
self.table.attach(label, 0,1, 3,4,
xpadding=3, xoptions=gtk.FILL, yoptions=0)
self.yText = gtk.Entry()
gtklogger.setWidgetName(self.yText, 'y')
self.yText.set_size_request(12*guitop.top().digitsize, -1)
self.table.attach(self.yText, 1,2, 3,4,
xpadding=3, xoptions=gtk.EXPAND|gtk.FILL, yoptions=0)
self.ysignal = gtklogger.connect(self.yText, 'changed',
self.posChangedCB)
if config.dimension() == 3:
label = gtk.Label("position z:")
label.set_alignment(1.0, 0.5)
self.table.attach(label, 0,1, 4,5,
xpadding=3, xoptions=gtk.FILL, yoptions=0)
self.zText = gtk.Entry()
gtklogger.setWidgetName(self.zText, 'z')
self.zText.set_size_request(12*guitop.top().digitsize, -1)
self.table.attach(self.zText, 1,2, 4,5,
xpadding=3, xoptions=gtk.EXPAND|gtk.FILL, yoptions=0)
self.zsignal = gtklogger.connect(self.zText, 'changed',
self.posChangedCB)
timerow = 5
else:
timerow = 6
# Time controls. Typing in the time widget does not
# immediately update the displayed data, because interpolating
# to a new time is an expensive computation, and shouldn't be
# done while the user is in the middle of typing. Instead,
# the time widget is normally desensitized and uneditable.
# When the user clicks the "Edit" button, the widget becomes
# editable, the rest of the window is desensitized, and the
# "Edit" button changes do a "Done" button. When the user
# clicks "Done" the data is updated and the time widget
# becomes uneditable again.
label = gtk.Label("time:")
label.set_alignment(1.0, 0.5)
self.table.attach(label, 0,1, timerow,timerow+1,
xpadding=3, xoptions=gtk.FILL, yoptions=0)
tBox = gtk.HBox(spacing=3)
self.table.attach(tBox, 1,2, timerow,timerow+1,
xpadding=3, xoptions=gtk.EXPAND|gtk.FILL, yoptions=0)
self.tText = gtk.Entry()
self.tText.set_editable(False)
self.tText.set_sensitive(False)
tBox.pack_start(self.tText, expand=1, fill=1)
gtklogger.setWidgetName(self.tText, 't')
self.tText.set_size_request(12*guitop.top().digitsize, -1)
self.tEditButton = gtk.Button("Edit")
tBox.pack_start(self.tEditButton, expand=0, fill=0)
gtklogger.setWidgetName(self.tEditButton, "tEdit")
gtklogger.connect(self.tEditButton, 'clicked', self.tEditCB)
self.tEditMode = False
# Output selection
label = gtk.Label("Output:")
label.set_alignment(1.0, 0.5)
self.table.attach(label, 0,1, timerow+2,timerow+3,
xpadding=3, xoptions=gtk.FILL, yoptions=0)
tooltips.set_tooltip_text(label,"Choose which data is displayed.")
self.outputwidget = self.outputparam.makeWidget(scope=self)
self.table.attach(self.outputwidget.gtk, 1,2, timerow+2,timerow+3,
xpadding=3, xoptions=gtk.EXPAND|gtk.FILL, yoptions=0)
switchboard.requestCallback(self.outputwidget, self.outputwidgetCB)
# Data display panel
hbox = gtk.HBox()
self.mainbox.pack_start(hbox, expand=1, fill=1, padding=5)
frame = gtk.Frame("Data")
gtklogger.setWidgetName(frame, 'Data')
frame.set_shadow_type(gtk.SHADOW_IN)
hbox.pack_start(frame, expand=1, fill=1, padding=5)
vbox = gtk.VBox()
frame.add(vbox)
self.databox = gtk.HBox()
vbox.pack_start(self.databox, expand=1, fill=1, padding=3)
self.datawidget = None # set by updateData
# Buttons at the bottom of the window
buttonbox = gtk.HBox()
self.mainbox.pack_start(buttonbox, expand=0, fill=0, padding=3)
# Freeze buttons
freezeframe = gtk.Frame("Freeze")
gtklogger.setWidgetName(freezeframe, "Freeze")
buttonbox.pack_start(freezeframe, expand=1, fill=1, padding=3)
hbox = gtk.HBox()
freezeframe.add(hbox)
# Freeze Space button
self.freezeSpaceFlag = False
self.freezeSpaceButton = gtk.CheckButton('Space')
gtklogger.setWidgetName(self.freezeSpaceButton, 'Space')
hbox.pack_start(self.freezeSpaceButton, expand=1, fill=0, padding=0)
self.freezeSpaceButton.set_active(self.freezeSpaceFlag)
gtklogger.connect(self.freezeSpaceButton, 'clicked',
self.freezeSpaceButtonCB)
tooltips.set_tooltip_text(self.freezeSpaceButton,
"Prevent the data in this window from being updated when the sample position changes.")
# Freeze Time button
self.freezeTimeFlag = False
self.freezeTimeButton = gtk.CheckButton('Time')
gtklogger.setWidgetName(self.freezeTimeButton, "Time")
hbox.pack_start(self.freezeTimeButton, expand=1, fill=0, padding=0)
self.freezeTimeButton.set_active(self.freezeTimeFlag)
gtklogger.connect(self.freezeTimeButton,'clicked',
self.freezeTimeButtonCB)
tooltips.set_tooltip_text(self.freezeTimeButton,
"Prevent the data in this window from being updated when the Mesh's time changes.")
# Clone button
self.cloneButton = gtkutils.StockButton(gtk.STOCK_COPY, 'Clone')
gtklogger.setWidgetName(self.cloneButton, 'Clone')
gtklogger.connect(self.cloneButton, 'clicked', self.cloneButtonCB)
buttonbox.pack_start(self.cloneButton, expand=0, fill=0, padding=3)
tooltips.set_tooltip_text(self.cloneButton,
"Make a copy of this window with its current settings.")
# Close button
self.closeButton = gtk.Button(stock=gtk.STOCK_CLOSE)
gtklogger.setWidgetName(self.closeButton, 'Close')
gtklogger.connect(self.closeButton, 'clicked', self.closeButtonCB)
buttonbox.pack_end(self.closeButton, expand=0, fill=0, padding=3)
self.gtk.connect('destroy', self.destroyCB)
self.updateGfxWindowChooser()
if gfxwindow:
self.gfxWindowChooser.set_state(gfxwindow.name)
if position is not None:
self.updatePosition(position)
self.currentMesh = None
self.updateMesh()
self.setupSwitchboard() # gfx window dependent callbacks
self.sbcallbacks += [
switchboard.requestCallbackMain('open graphics window',
self.gfxwindowChanged),
switchboard.requestCallbackMain('close graphics window',
self.gfxwindowChanged),
switchboard.requestCallbackMain('mesh data changed',
self.meshDataChanged),
switchboard.requestCallbackMain((gfxwindow, "time changed"),
self.timeChanged)
]
self.gtk.show_all()
def __init__(self, movenodetoolbox):
debug.mainthreadTest()
self.downed = 0 # is the mouse button down?
self.moving = 0 # in the middle of a move
self.movingnode = None # node being moved
# writable should only be set by self.set_writable, which
# issues a checkpoint.
self.writable = True # is the top most Skeleton writable?
self.mode = "Mouse"
self.mouselock = lock.Lock()
toolboxGUI.GfxToolbox.__init__(self, "Move Nodes", movenodetoolbox)
mainbox = gtk.VBox()
self.gtk.add(mainbox)
hbox = gtk.HBox()
mainbox.pack_start(hbox, expand=0, fill=0)
gtklogger.setWidgetName(hbox, "MoveWith")
hbox.pack_start(gtk.Label("Move with: "), expand=0, fill=0)
modes = [("Mouse", "Click and drag a node to move it."),
("Keyboard",
"Select a node, type a position, and click the Move button")
]
self.modebuttons = []
for mode, tip in modes:
if self.modebuttons:
button = gtk.RadioButton(label=mode,
group=self.modebuttons[0])
else:
button = gtk.RadioButton(label=mode)
gtklogger.setWidgetName(button, mode)
self.modebuttons.append(button)
tooltips.set_tooltip_text(button,tip)
hbox.pack_start(button, expand=0, fill=0)
button.set_active(self.mode is mode)
gtklogger.connect(button, 'clicked', self.changeMode, mode)
# allow illegal move?
self.allow_illegal = gtk.CheckButton("Allow illegal moves")
gtklogger.setWidgetName(self.allow_illegal, "AllowIllegal")
mainbox.pack_start(self.allow_illegal, expand=0, fill=0, padding=1)
mainbox.pack_start(gtk.HSeparator(), expand=0, fill=0, padding=3)
gtklogger.connect(self.allow_illegal, "clicked", self.illegal_status)
if movenodetoolbox.allow_illegal:
self.allow_illegal.set_active(1)
else:
self.allow_illegal.set_active(0)
if config.dimension() == 2:
self.table = gtk.Table(columns=2, rows=6)
r = 2
elif config.dimension() == 3:
self.table = gtk.Table(columns=2, rows=8)
r = 3
mainbox.pack_start(self.table, expand=0, fill=0)
label = gtk.Label('x=')
label.set_alignment(1.0, 0.5)
self.table.attach(label, 0,1, 0,1, xpadding=5, xoptions=gtk.FILL)
self.xtext = gtk.Entry()
gtklogger.setWidgetName(self.xtext, "x")
self.xsignal = gtklogger.connect_passive(self.xtext, 'changed')
self.xtext.set_size_request(12*guitop.top().digitsize, -1)
self.xtext.set_editable(1)
self.table.attach(self.xtext, 1,2, 0,1,
xpadding=5, xoptions=gtk.EXPAND|gtk.FILL)
tooltips.set_tooltip_text(self.xtext,"x position of the mouse")
label = gtk.Label('y=')
label.set_alignment(1.0, 0.5)
self.table.attach(label, 0,1, 1,2, xpadding=5, xoptions=gtk.FILL)
self.ytext = gtk.Entry()
gtklogger.setWidgetName(self.ytext, 'y')
self.ysignal = gtklogger.connect_passive(self.ytext, 'changed')
self.ytext.set_size_request(12*guitop.top().digitsize, -1)
self.ytext.set_editable(1)
self.table.attach(self.ytext, 1,2, 1,2,
xpadding=5, xoptions=gtk.EXPAND|gtk.FILL)
tooltips.set_tooltip_text(self.ytext,"y position of the mouse")
if config.dimension() == 3:
label = gtk.Label('z=')
label.set_alignment(1.0, 0.5)
self.table.attach(label, 0,1, 2,3, xpadding=5, xoptions=gtk.FILL)
self.ztext = gtk.Entry()
gtklogger.setWidgetName(self.ztext, 'z')
self.zsignal = gtklogger.connect_passive(self.ztext, 'changed')
self.ztext.set_size_request(12*guitop.top().digitsize, -1)
self.ztext.set_editable(1)
self.table.attach(self.ztext, 1,2, 2,3,
xpadding=5, xoptions=gtk.EXPAND|gtk.FILL)
tooltips.set_tooltip_text(self.ztext,"z position of the mouse")
label = gtk.Label("Change in... ")
label.set_alignment(1.0, 0.5)
self.table.attach(label, 0,1, r,r+1, xpadding=4,
xoptions=gtk.EXPAND|gtk.FILL)
label = gtk.Label("shape energy=")
label.set_alignment(1.0, 0.5)
self.table.attach(label, 0,1, r+1,r+2, xpadding=5, xoptions=gtk.FILL)
self.shapetext = gtk.Entry()
self.shapetext.set_editable(0)
gtklogger.setWidgetName(self.shapetext,"shape")
self.shapetext.set_size_request(12*guitop.top().digitsize, -1)
self.table.attach(self.shapetext, 1,2, r+1,r+2,
xpadding=5, xoptions=gtk.EXPAND|gtk.FILL)
tooltips.set_tooltip_text(self.shapetext,"total change in shape energy")
label = gtk.Label("homogeneity=")
label.set_alignment(1.0, 0.5)
self.table.attach(label, 0,1, r+2,r+3, xpadding=5, xoptions=gtk.FILL)
self.homogtext = gtk.Entry()
self.homogtext.set_editable(0)
gtklogger.setWidgetName(self.homogtext,"homog")
self.homogtext.set_size_request(12*guitop.top().digitsize, -1)
self.table.attach(self.homogtext, 1,2, r+2,r+3,
xpadding=5, xoptions=gtk.EXPAND|gtk.FILL)
tooltips.set_tooltip_text(self.homogtext,"total change in homogeneity")
mainbox.pack_start(gtk.HSeparator(), expand=0, fill=0, padding=3)
self.statusText = gtk.Label()
gtklogger.setWidgetName(self.statusText, "Status")
mainbox.pack_start(self.statusText, expand=0, fill=0, padding=3)
bbox = gtk.HBox(homogeneous=1, spacing=2)
mainbox.pack_end(bbox, expand=0, fill=0, padding=3)
self.undobutton = gtk.Button(stock=gtk.STOCK_UNDO)
tooltips.set_tooltip_text(self.undobutton,"Undo the latest node move.")
self.movebutton = gtk.Button('Move')
tooltips.set_tooltip_text(self.movebutton,
"Move the selected node to the specified position.")
self.redobutton = gtk.Button(stock=gtk.STOCK_REDO)
tooltips.set_tooltip_text(self.redobutton,"Redo the latest UNDO.")
gtklogger.setWidgetName(self.undobutton, 'Undo')
gtklogger.setWidgetName(self.redobutton, 'Redo')
gtklogger.setWidgetName(self.movebutton, 'Move')
bbox.pack_start(self.undobutton, expand=1, fill=1)
bbox.pack_start(self.movebutton, expand=1, fill=1)
bbox.pack_start(self.redobutton, expand=1, fill=1)
gtklogger.connect(self.undobutton, 'clicked', self.undoCB)
gtklogger.connect(self.movebutton, 'clicked', self.moveCB)
gtklogger.connect(self.redobutton, 'clicked', self.redoCB)
self.sbcallbacks = [
switchboard.requestCallbackMain(('who changed', 'Skeleton'),
self.skelChanged),
switchboard.requestCallbackMain("made reservation",
self.rsrvChanged,
1),
switchboard.requestCallbackMain("cancelled reservation",
self.rsrvChanged, 0),
switchboard.requestCallbackMain(("node selected",
movenodetoolbox),
self.nodeSelected),
switchboard.requestCallbackMain(("illegal-move status changed",
movenodetoolbox),
self.illegal_status_changed),
switchboard.requestCallbackMain(("skeleton changed",
movenodetoolbox),
self.layersChanged)
]
self.move_info(None, '---', '---', '')
def __init__thread(self, gfxwindow, time, position, output):
debug.mainthreadTest()
allMeshDataWindows.append(self)
widgetscope.WidgetScope.__init__(self, None)
current_count = MeshDataGUI.count
MeshDataGUI.count += 1
self._name = "Mesh_Data_%d" % current_count
self.output = output
self.time = time
self.position = position
self.sbcallbacks = []
self.gsbcallbacks = [] # callbacks from a specific gfx window
self.updateLock = lock.Lock()
self.outputparam = \
ooflib.engine.IO.output.AggregateOutputParameter('output')
# Although it's not displayed, we need a mesh widget in the
# widgetscope, or the OutputParameterWidget won't work.
# TODO LATER: Is this ugly, or what?
self.meshWidget = whowidget.WhoWidget(mesh.meshes,
scope=self,
name="Godot")
self.gtk = gtk.Window(gtk.WINDOW_TOPLEVEL)
title = utils.underscore2space(self._name)
self.gtk.set_title(title)
gtklogger.newTopLevelWidget(self.gtk, title)
gtklogger.connect_passive(self.gtk, 'delete-event')
gtklogger.connect_passive(self.gtk, 'configure-event')
self.mainbox = gtk.VBox()
self.gtk.add(self.mainbox)
# Put this window into the Windows menu. The menu item can't
# be logged, since the creation and operation of the window
# aren't logged, so scripts shouldn't refer to it at all.
mainmenu.OOF.Windows.Mesh_Data.addItem(
oofmenu.OOFMenuItem(self._name,
no_log=1,
help="Raise Mesh Data window %d." %
current_count,
threadable=oofmenu.UNTHREADABLE,
callback=self.raiseWindow))
expander = gtk.Expander("Source")
gtklogger.setWidgetName(expander, 'ViewSource')
gtklogger.connect_passive_after(expander, 'activate')
self.mainbox.pack_start(expander)
expander.set_expanded(1)
self.table = gtk.Table(rows=config.dimension() + 4, columns=2)
expander.add(self.table)
label = gtk.Label("Source Window:")
label.set_alignment(1.0, 0.5)
self.table.attach(label, 0, 1, 0, 1, xpadding=3, xoptions=gtk.FILL)
tooltips.set_tooltip_text(
label, "Display data for mouse clicks in this Graphics window.")
self.gfxWindowChooser = chooser.ChooserWidget([],
callback=self.chooserCB,
name='GfxWindow')
self.table.attach(self.gfxWindowChooser.gtk,
1,
2,
0,
1,
xpadding=3,
xoptions=gtk.EXPAND | gtk.FILL,
yoptions=0)
label = gtk.Label("Mesh:")
label.set_alignment(1.0, 0.5)
self.table.attach(label,
0,
1,
1,
2,
xpadding=3,
xoptions=gtk.FILL,
yoptions=0)
tooltips.set_tooltip_text(
label, "Data is displayed for values on this mesh.")
self.meshText = gtk.Entry()
gtklogger.setWidgetName(self.meshText, "meshname")
self.meshText.set_editable(False)
self.meshText.set_size_request(12 * guitop.top().charsize, -1)
self.table.attach(self.meshText,
1,
2,
1,
2,
xpadding=3,
xoptions=gtk.EXPAND | gtk.FILL,
yoptions=0)
# Position controls
label = gtk.Label("position x:")
label.set_alignment(1.0, 0.5)
self.table.attach(label,
0,
1,
2,
3,
xpadding=3,
xoptions=gtk.FILL,
yoptions=0)
self.xText = gtk.Entry()
gtklogger.setWidgetName(self.xText, 'x')
self.xText.set_size_request(12 * guitop.top().digitsize, -1)
self.table.attach(self.xText,
1,
2,
2,
3,
xpadding=3,
xoptions=gtk.EXPAND | gtk.FILL,
yoptions=0)
self.xsignal = gtklogger.connect(self.xText, 'changed',
self.posChangedCB)
label = gtk.Label("position y:")
label.set_alignment(1.0, 0.5)
self.table.attach(label,
0,
1,
3,
4,
xpadding=3,
xoptions=gtk.FILL,
yoptions=0)
self.yText = gtk.Entry()
gtklogger.setWidgetName(self.yText, 'y')
self.yText.set_size_request(12 * guitop.top().digitsize, -1)
self.table.attach(self.yText,
1,
2,
3,
4,
xpadding=3,
xoptions=gtk.EXPAND | gtk.FILL,
yoptions=0)
self.ysignal = gtklogger.connect(self.yText, 'changed',
self.posChangedCB)
if config.dimension() == 3:
label = gtk.Label("position z:")
label.set_alignment(1.0, 0.5)
self.table.attach(label,
0,
1,
4,
5,
xpadding=3,
xoptions=gtk.FILL,
yoptions=0)
self.zText = gtk.Entry()
gtklogger.setWidgetName(self.zText, 'z')
self.zText.set_size_request(12 * guitop.top().digitsize, -1)
self.table.attach(self.zText,
1,
2,
4,
5,
xpadding=3,
xoptions=gtk.EXPAND | gtk.FILL,
yoptions=0)
self.zsignal = gtklogger.connect(self.zText, 'changed',
self.posChangedCB)
timerow = 5
else:
timerow = 6
# Time controls. Typing in the time widget does not
# immediately update the displayed data, because interpolating
# to a new time is an expensive computation, and shouldn't be
# done while the user is in the middle of typing. Instead,
# the time widget is normally desensitized and uneditable.
# When the user clicks the "Edit" button, the widget becomes
# editable, the rest of the window is desensitized, and the
# "Edit" button changes do a "Done" button. When the user
# clicks "Done" the data is updated and the time widget
# becomes uneditable again.
label = gtk.Label("time:")
label.set_alignment(1.0, 0.5)
self.table.attach(label,
0,
1,
timerow,
timerow + 1,
xpadding=3,
xoptions=gtk.FILL,
yoptions=0)
tBox = gtk.HBox(spacing=3)
self.table.attach(tBox,
1,
2,
timerow,
timerow + 1,
xpadding=3,
xoptions=gtk.EXPAND | gtk.FILL,
yoptions=0)
self.tText = gtk.Entry()
self.tText.set_editable(False)
self.tText.set_sensitive(False)
tBox.pack_start(self.tText, expand=1, fill=1)
gtklogger.setWidgetName(self.tText, 't')
self.tText.set_size_request(12 * guitop.top().digitsize, -1)
self.tEditButton = gtk.Button("Edit")
tBox.pack_start(self.tEditButton, expand=0, fill=0)
gtklogger.setWidgetName(self.tEditButton, "tEdit")
gtklogger.connect(self.tEditButton, 'clicked', self.tEditCB)
self.tEditMode = False
# Output selection
label = gtk.Label("Output:")
label.set_alignment(1.0, 0.5)
self.table.attach(label,
0,
1,
timerow + 2,
timerow + 3,
xpadding=3,
xoptions=gtk.FILL,
yoptions=0)
tooltips.set_tooltip_text(label, "Choose which data is displayed.")
self.outputwidget = self.outputparam.makeWidget(scope=self)
self.table.attach(self.outputwidget.gtk,
1,
2,
timerow + 2,
timerow + 3,
xpadding=3,
xoptions=gtk.EXPAND | gtk.FILL,
yoptions=0)
switchboard.requestCallback(self.outputwidget, self.outputwidgetCB)
# Data display panel
hbox = gtk.HBox()
self.mainbox.pack_start(hbox, expand=1, fill=1, padding=5)
frame = gtk.Frame("Data")
gtklogger.setWidgetName(frame, 'Data')
frame.set_shadow_type(gtk.SHADOW_IN)
hbox.pack_start(frame, expand=1, fill=1, padding=5)
vbox = gtk.VBox()
frame.add(vbox)
self.databox = gtk.HBox()
vbox.pack_start(self.databox, expand=1, fill=1, padding=3)
self.datawidget = None # set by updateData
# Buttons at the bottom of the window
buttonbox = gtk.HBox()
self.mainbox.pack_start(buttonbox, expand=0, fill=0, padding=3)
# Freeze buttons
freezeframe = gtk.Frame("Freeze")
gtklogger.setWidgetName(freezeframe, "Freeze")
buttonbox.pack_start(freezeframe, expand=1, fill=1, padding=3)
hbox = gtk.HBox()
freezeframe.add(hbox)
# Freeze Space button
self.freezeSpaceFlag = False
self.freezeSpaceButton = gtk.CheckButton('Space')
gtklogger.setWidgetName(self.freezeSpaceButton, 'Space')
hbox.pack_start(self.freezeSpaceButton, expand=1, fill=0, padding=0)
self.freezeSpaceButton.set_active(self.freezeSpaceFlag)
gtklogger.connect(self.freezeSpaceButton, 'clicked',
self.freezeSpaceButtonCB)
tooltips.set_tooltip_text(
self.freezeSpaceButton,
"Prevent the data in this window from being updated when the sample position changes."
)
# Freeze Time button
self.freezeTimeFlag = False
self.freezeTimeButton = gtk.CheckButton('Time')
gtklogger.setWidgetName(self.freezeTimeButton, "Time")
hbox.pack_start(self.freezeTimeButton, expand=1, fill=0, padding=0)
self.freezeTimeButton.set_active(self.freezeTimeFlag)
gtklogger.connect(self.freezeTimeButton, 'clicked',
self.freezeTimeButtonCB)
tooltips.set_tooltip_text(
self.freezeTimeButton,
"Prevent the data in this window from being updated when the Mesh's time changes."
)
# Clone button
self.cloneButton = gtkutils.StockButton(gtk.STOCK_COPY, 'Clone')
gtklogger.setWidgetName(self.cloneButton, 'Clone')
gtklogger.connect(self.cloneButton, 'clicked', self.cloneButtonCB)
buttonbox.pack_start(self.cloneButton, expand=0, fill=0, padding=3)
tooltips.set_tooltip_text(
self.cloneButton,
"Make a copy of this window with its current settings.")
# Close button
self.closeButton = gtk.Button(stock=gtk.STOCK_CLOSE)
gtklogger.setWidgetName(self.closeButton, 'Close')
gtklogger.connect(self.closeButton, 'clicked', self.closeButtonCB)
buttonbox.pack_end(self.closeButton, expand=0, fill=0, padding=3)
self.gtk.connect('destroy', self.destroyCB)
self.updateGfxWindowChooser()
if gfxwindow:
self.gfxWindowChooser.set_state(gfxwindow.name)
if position is not None:
self.updatePosition(position)
self.currentMesh = None
self.updateMesh()
self.setupSwitchboard() # gfx window dependent callbacks
self.sbcallbacks += [
switchboard.requestCallbackMain('open graphics window',
self.gfxwindowChanged),
switchboard.requestCallbackMain('close graphics window',
self.gfxwindowChanged),
switchboard.requestCallbackMain('mesh data changed',
self.meshDataChanged),
switchboard.requestCallbackMain((gfxwindow, "time changed"),
self.timeChanged)
]
self.gtk.show_all()
def __init__(self, pinnodestoolbox):
debug.mainthreadTest()
toolboxGUI.GfxToolbox.__init__(self, "Pin Nodes", pinnodestoolbox)
mainbox = gtk.VBox()
self.gtk.add(mainbox)
infoframe = gtk.Frame()
mainbox.pack_start(infoframe, expand=0, fill=0)
info = gtk.Label("""Click a node to pin it,
Shift-click to unpin it,
And Ctrl-click to toggle.""")
infoframe.add(info)
if config.dimension() == 2:
self.table = gtk.Table(columns=3, rows=5)
r = 2 # variable used to make 2D and 3D code overlap better
elif config.dimension() == 3:
self.table = gtk.Table(columns=3, rows=7)
r = 3
mainbox.pack_start(self.table, expand=0, fill=0)
label = gtk.Label('Mouse')
label.set_alignment(1.0, 0.5)
self.table.attach(label, 0,1, 0,r, xpadding=2, xoptions=0)
label = gtk.Label('x=')
label.set_alignment(1.0, 0.5)
self.table.attach(label, 1,2, 0,1, xpadding=2, xoptions=gtk.FILL)
self.xtext = gtk.Entry()
gtklogger.setWidgetName(self.xtext,"Mouse X")
self.xtext.set_size_request(12*guitop.top().digitsize, -1)
self.xtext.set_editable(0)
self.table.attach(self.xtext, 2,3, 0,1,
xpadding=2, xoptions=gtk.EXPAND|gtk.FILL)
tooltips.set_tooltip_text(self.xtext,"x position of the mouse")
label = gtk.Label('y=')
label.set_alignment(1.0, 0.5)
self.table.attach(label, 1,2, 1,2, xpadding=2, xoptions=gtk.FILL)
self.ytext = gtk.Entry()
gtklogger.setWidgetName(self.ytext,"Mouse Y")
self.ytext.set_size_request(12*guitop.top().digitsize, -1)
self.ytext.set_editable(0)
self.table.attach(self.ytext, 2,3, 1,2,
xpadding=2, xoptions=gtk.EXPAND|gtk.FILL)
tooltips.set_tooltip_text(self.ytext,"y position of the mouse")
if config.dimension() == 3:
label = gtk.Label('z=')
label.set_alignment(1.0, 0.5)
self.table.attach(label, 1,2, 2,3, xpadding=2, xoptions=gtk.FILL)
self.ztext = gtk.Entry()
gtklogger.setWidgetName(self.ztext,"Mouse Z")
self.ztext.set_size_request(12*guitop.top().digitsize, -1)
self.ztext.set_editable(0)
self.table.attach(self.ztext, 2,3, 2,3,
xpadding=2, xoptions=gtk.EXPAND|gtk.FILL)
tooltips.set_tooltip_text(self.ztext,"z position of the mouse")
self.table.set_row_spacing(r-1, 5)
label = gtk.Label("Node")
label.set_alignment(1.0, 0.5)
self.table.attach(label, 0,1, r,r+2, xpadding=2, xoptions=0)
label = gtk.Label('x=')
label.set_alignment(1.0, 0.5)
self.table.attach(label, 1,2, r,r+1, xpadding=2, xoptions=gtk.FILL)
self.nodextext = gtk.Entry()
gtklogger.setWidgetName(self.nodextext,"Node X")
self.nodextext.set_size_request(12*guitop.top().digitsize, -1)
self.nodextext.set_editable(0)
self.table.attach(self.nodextext, 2,3, r,r+1,
xpadding=2, xoptions=gtk.EXPAND|gtk.FILL)
r += 1
label = gtk.Label('y=')
label.set_alignment(1.0, 0.5)
self.table.attach(label, 1,2, r,r+1, xpadding=2, xoptions=gtk.FILL)
self.nodeytext = gtk.Entry()
gtklogger.setWidgetName(self.nodeytext,"Node Y")
self.nodeytext.set_size_request(12*guitop.top().digitsize, -1)
self.nodeytext.set_editable(0)
self.table.attach(self.nodeytext, 2,3, r,r+1,
xpadding=2, xoptions=gtk.EXPAND|gtk.FILL)
r += 1
if config.dimension() == 3:
label = gtk.Label('z=')
label.set_alignment(1.0, 0.5)
self.table.attach(label, 1,2, r,r+1, xpadding=2, xoptions=gtk.FILL)
self.nodeztext = gtk.Entry()
gtklogger.setWidgetName(self.nodeztext,"Node Z")
self.nodeztext.set_size_request(12*guitop.top().digitsize, -1)
self.nodeztext.set_editable(0)
self.table.attach(self.nodeztext, 2,3, r,r+1,
xpadding=2, xoptions=gtk.EXPAND|gtk.FILL)
r += 1
self.pintext = gtk.Label()
gtklogger.setWidgetName(self.pintext,"Pin Label")
self.pintext.set_alignment(0.0, 0.5)
self.table.attach(self.pintext, 2,3, r,r+1,
xpadding=5, xoptions=gtk.EXPAND|gtk.FILL)
modbox = gtk.VBox()
mainbox.pack_end(modbox, expand=0, fill=0)
bbox1 = gtk.HBox(homogeneous=True, spacing=2)
modbox.pack_end(bbox1, expand=0, fill=0, padding=2)
self.undobutton = gtk.Button(stock=gtk.STOCK_UNDO)
gtklogger.setWidgetName(self.undobutton, 'Undo')
gtklogger.connect(self.undobutton, "clicked", self.undoCB)
tooltips.set_tooltip_text(self.undobutton,"Undo the latest action.")
bbox1.pack_start(self.undobutton, expand=1, fill=1)
self.redobutton = gtk.Button(stock=gtk.STOCK_REDO)
gtklogger.setWidgetName(self.redobutton, 'Redo')
gtklogger.connect(self.redobutton, "clicked", self.redoCB)
tooltips.set_tooltip_text(self.redobutton,"Redo the latest undone action.")
bbox1.pack_start(self.redobutton, expand=1, fill=1)
bbox2 = gtk.HBox(homogeneous=True, spacing=2)
modbox.pack_end(bbox2, expand=0, fill=0, padding=2)
self.unpinallbutton = gtk.Button("Unpin All")
gtklogger.setWidgetName(self.unpinallbutton, 'UnPinAll')
gtklogger.connect(self.unpinallbutton, "clicked", self.unpinallCB)
tooltips.set_tooltip_text(self.unpinallbutton,"Unpin all the pinned nodes.")
bbox2.pack_start(self.unpinallbutton, expand=1, fill=1)
self.invertbutton = gtk.Button("Invert")
gtklogger.setWidgetName(self.invertbutton, 'Invert')
gtklogger.connect(self.invertbutton, "clicked", self.invertCB)
tooltips.set_tooltip_text(self.invertbutton,"Invert - pin the unpinned and unpin the pinned.")
bbox2.pack_start(self.invertbutton, expand=1, fill=1)
self.status = gtk.Label()
gtklogger.setWidgetName(self.status,"Status")
self.status.set_alignment(0.0, 0.5)
mainbox.pack_end(self.status, expand=0, fill=0, padding=5)
# self.skeleton_context is set by self.update().
self.skeleton_context = None
self.current_node = None
def _newWindow(self, name, **kwargs):
if top(): # if in GUI mode
return GfxWindow3D(name, self, **kwargs)
return ghostgfxwindow.GhostGfxWindow(name, self, **kwargs)
def _newWindow(self, name, **kwargs):
if top(): # if in GUI mode
return GfxWindow3D(name, self, **kwargs)
return ghostgfxwindow.GhostGfxWindow(name, self, **kwargs)
def __init__(self, viewertoolbox):
debug.mainthreadTest()
toolboxGUI.GfxToolbox.__init__(self, "Viewer", viewertoolbox)
mainbox = gtk.VBox()
self.gtk.add(mainbox)
infoframe = gtk.Frame("Position Information")
infoframe.set_shadow_type(gtk.SHADOW_IN)
mainbox.pack_start(infoframe, fill=0, expand=0)
infotable = gtk.Table(columns=3, rows=2)
infoframe.add(infotable)
pixellabel = gtk.Label("Pixel: ")
pixellabel.set_alignment(1.0, 0.5)
self.pixel_x = gtk.Entry()
gtklogger.setWidgetName(self.pixel_x, "PixelX")
self.pixel_x.set_size_request(ndigits * guitop.top().digitsize, -1)
self.pixel_x.set_editable(0)
self.pixel_y = gtk.Entry()
gtklogger.setWidgetName(self.pixel_y, "PixelY")
self.pixel_y.set_size_request(ndigits * guitop.top().digitsize, -1)
self.pixel_y.set_editable(0)
physicallabel = gtk.Label("Physical: ")
physicallabel.set_alignment(1.0, 0.5)
self.physical_x = gtk.Entry()
gtklogger.setWidgetName(self.physical_x, "PhysicalX")
self.physical_x.set_size_request(ndigits * guitop.top().digitsize, -1)
self.physical_x.set_editable(0)
self.physical_y = gtk.Entry()
gtklogger.setWidgetName(self.physical_y, "PhysicalY")
self.physical_y.set_size_request(ndigits * guitop.top().digitsize, -1)
self.physical_y.set_editable(0)
infotable.attach(pixellabel,
0,
1,
0,
1,
xpadding=5,
ypadding=2,
xoptions=0)
infotable.attach(self.pixel_x,
1,
2,
0,
1,
xpadding=1,
ypadding=2,
xoptions=gtk.FILL | gtk.EXPAND)
infotable.attach(self.pixel_y,
2,
3,
0,
1,
xpadding=1,
ypadding=2,
xoptions=gtk.FILL | gtk.EXPAND)
infotable.attach(physicallabel,
0,
1,
1,
2,
xpadding=5,
ypadding=2,
xoptions=0)
infotable.attach(self.physical_x,
1,
2,
1,
2,
xpadding=1,
ypadding=2,
xoptions=gtk.FILL | gtk.EXPAND)
infotable.attach(self.physical_y,
2,
3,
1,
2,
xpadding=1,
ypadding=2,
xoptions=gtk.FILL | gtk.EXPAND)
zoomframe = gtk.Frame("Zoom")
gtklogger.setWidgetName(zoomframe, "Zoom")
zoomframe.set_shadow_type(gtk.SHADOW_IN)
mainbox.pack_start(zoomframe, fill=0, expand=0)
zoombox = gtk.VBox()
zoomframe.add(zoombox)
buttonrow = gtk.HBox(homogeneous=1, spacing=2)
zoombox.pack_start(buttonrow, expand=0, fill=1, padding=2)
inbutton = gtkutils.StockButton(gtk.STOCK_ZOOM_IN, 'In')
buttonrow.pack_start(inbutton, expand=0, fill=1)
gtklogger.setWidgetName(inbutton, "In")
gtklogger.connect(inbutton, 'clicked', self.inCB)
outbutton = gtkutils.StockButton(gtk.STOCK_ZOOM_OUT, 'Out')
buttonrow.pack_start(outbutton, expand=0, fill=1)
gtklogger.setWidgetName(outbutton, "Out")
gtklogger.connect(outbutton, 'clicked', self.outCB)
fillbutton = gtkutils.StockButton(gtk.STOCK_ZOOM_FIT, 'Fill')
buttonrow.pack_start(fillbutton, expand=0, fill=1)
gtklogger.setWidgetName(fillbutton, "Fill")
gtklogger.connect(fillbutton, 'clicked', self.fillCB)
factorrow = gtk.HBox()
zoombox.pack_start(factorrow, expand=0, fill=0, padding=2)
factorrow.pack_start(gtk.Label("Zoom Factor: "), expand=0, fill=0)
self.zoomfactor = gtk.Entry()
self.zoomfactor.set_editable(1)
self.zoomfactor.set_size_request(ndigits * guitop.top().digitsize, -1)
gtklogger.setWidgetName(self.zoomfactor, "Factor")
self.zfactorsignal = gtklogger.connect_passive(self.zoomfactor,
"changed")
factorrow.pack_start(self.zoomfactor, expand=1, fill=1)
zoombox.pack_start(gtk.HSeparator(), fill=0, expand=0, padding=2)
label0 = gtk.Label("Shift+Click: Zoom in\nCtrl+Click: Zoom out")
label0.set_pattern(" _______\n ________\n")
label0.set_justify(gtk.JUSTIFY_LEFT)
zoombox.pack_start(label0, fill=0, expand=0, padding=2)
align = gtk.Alignment(xalign=0.5)
mainbox.pack_end(align, expand=0, fill=0, padding=2)
canvas_info = gtkutils.StockButton(gtk.STOCK_DIALOG_INFO,
"Canvas Info")
gtklogger.setWidgetName(canvas_info, "Info")
gtklogger.connect(canvas_info, "clicked", self.canvas_infoCB)
tooltips.set_tooltip_text(
canvas_info, "Display canvas information in the message window.")
align.add(canvas_info)
self.currentZFactor = self.gfxwindow().zoomFactor()
switchboard.requestCallbackMain("zoom factor changed", self.zfactorCB)
# Make sure that the Zoom commands in the graphics windows
# Settings menu use an up-to-date zoom factor.
self.gfxwindow().menu.Settings.Zoom.In.add_gui_callback(
self.wrapMenuZoom)
self.gfxwindow().menu.Settings.Zoom.Out.add_gui_callback(
self.wrapMenuZoom)
def __init__(self, viewertoolbox):
debug.mainthreadTest()
toolboxGUI.GfxToolbox.__init__(self, "Viewer", viewertoolbox)
mainbox = gtk.VBox()
self.gtk.add(mainbox)
# camera position
infoframe = gtk.Frame("Camera Info")
infoframe.set_shadow_type(gtk.SHADOW_IN)
mainbox.pack_start(infoframe, fill=0, expand=0)
infobox = gtk.VBox()
infoframe.add(infobox)
positionlabel = gtk.Label("Camera Position:")
infobox.pack_start(positionlabel, fill=0, expand=0)
positiontable = gtk.Table(columns=3, rows=1)
infobox.pack_start(positiontable, fill=0, expand=0)
self.camera_x = gtk.Entry()
gtklogger.setWidgetName(self.camera_x, "CameraX")
self.camera_x.set_size_request(ndigits * guitop.top().digitsize, -1)
self.camera_x.set_editable(0)
positiontable.attach(self.camera_x, 0, 1, 0, 1)
self.camera_y = gtk.Entry()
gtklogger.setWidgetName(self.camera_y, "CameraY")
self.camera_y.set_size_request(ndigits * guitop.top().digitsize, -1)
self.camera_y.set_editable(0)
positiontable.attach(self.camera_y, 1, 2, 0, 1)
self.camera_z = gtk.Entry()
gtklogger.setWidgetName(self.camera_z, "CameraZ")
self.camera_z.set_size_request(ndigits * guitop.top().digitsize, -1)
self.camera_z.set_editable(0)
positiontable.attach(self.camera_z, 2, 3, 0, 1)
focalpointlabel = gtk.Label("Focal Point:")
infobox.pack_start(focalpointlabel, fill=0, expand=0)
focalpointtable = gtk.Table(columns=3, rows=1)
infobox.pack_start(focalpointtable, fill=0, expand=0)
self.fp_x = gtk.Entry()
gtklogger.setWidgetName(self.fp_x, "FocalX")
self.fp_x.set_size_request(ndigits * guitop.top().digitsize, -1)
self.fp_x.set_editable(0)
focalpointtable.attach(self.fp_x, 0, 1, 0, 1)
self.fp_y = gtk.Entry()
gtklogger.setWidgetName(self.fp_y, "FocalY")
self.fp_y.set_size_request(ndigits * guitop.top().digitsize, -1)
self.fp_y.set_editable(0)
focalpointtable.attach(self.fp_y, 1, 2, 0, 1)
self.fp_z = gtk.Entry()
gtklogger.setWidgetName(self.fp_z, "FocalZ")
self.fp_z.set_size_request(ndigits * guitop.top().digitsize, -1)
self.fp_z.set_editable(0)
focalpointtable.attach(self.fp_z, 2, 3, 0, 1)
viewuplabel = gtk.Label("View Up Vector:")
infobox.pack_start(viewuplabel, fill=0, expand=0)
viewuptable = gtk.Table(columns=3, rows=1)
infobox.pack_start(viewuptable, fill=0, expand=0)
self.viewup_x = gtk.Entry()
gtklogger.setWidgetName(self.viewup_x, "ViewUpX")
self.viewup_x.set_size_request(ndigits * guitop.top().digitsize, -1)
self.viewup_x.set_editable(0)
viewuptable.attach(self.viewup_x, 0, 1, 0, 1)
self.viewup_y = gtk.Entry()
gtklogger.setWidgetName(self.viewup_y, "ViewUpY")
self.viewup_y.set_size_request(ndigits * guitop.top().digitsize, -1)
self.viewup_y.set_editable(0)
viewuptable.attach(self.viewup_y, 1, 2, 0, 1)
self.viewup_z = gtk.Entry()
gtklogger.setWidgetName(self.viewup_z, "ViewUpZ")
self.viewup_z.set_size_request(ndigits * guitop.top().digitsize, -1)
self.viewup_z.set_editable(0)
viewuptable.attach(self.viewup_z, 2, 3, 0, 1)
distancetable = gtk.Table(columns=2, rows=1)
infobox.pack_start(distancetable, fill=0, expand=0)
distancelabel = gtk.Label("Distance:")
distancetable.attach(distancelabel, 0, 1, 0, 1)
self.distance = gtk.Entry()
gtklogger.setWidgetName(self.distance, "Distance")
self.distance.set_size_request(ndigits * guitop.top().digitsize, -1)
self.distance.set_editable(0)
distancetable.attach(self.distance, 1, 2, 0, 1)
angletable = gtk.Table(columns=2, rows=1)
infobox.pack_start(angletable, fill=0, expand=0)
anglelabel = gtk.Label("View Angle:")
angletable.attach(anglelabel, 0, 1, 0, 1)
self.viewangle = gtk.Entry()
gtklogger.setWidgetName(self.viewangle, "ViewAngle")
self.viewangle.set_size_request(ndigits * guitop.top().digitsize, -1)
self.viewangle.set_editable(0)
angletable.attach(self.viewangle, 1, 2, 0, 1)
camerainfo = gtkutils.StockButton(gtk.STOCK_DIALOG_INFO, "Camera Info")
gtklogger.connect(camerainfo, 'clicked', self.camera_infoCB)
tooltips.set_tooltip_text(
camerainfo, "Display camera information in the message window.")
infobox.pack_start(camerainfo, fill=0, expand=0)
# TODO: Do we want to be able to zoom? As in changing the
# viewing angle?
# Translation
# dolly
transframe = gtk.Frame("Translation")
gtklogger.setWidgetName(transframe, "Translation")
transframe.set_shadow_type(gtk.SHADOW_IN)
mainbox.pack_start(transframe, fill=0, expand=0)
transbox = gtk.VBox()
transframe.add(transbox)
dollyrow = gtk.HBox(homogeneous=1, spacing=2)
transbox.pack_start(dollyrow, expand=0, fill=1, padding=2)
inbutton = gtk.Button('Dolly In')
gtklogger.setWidgetName(inbutton, 'DollyIn')
tooltips.set_tooltip_text(
inbutton, "Translate camera towards focal point by given factor")
dollyrow.pack_start(inbutton, expand=0, fill=1)
gtklogger.connect(inbutton, 'clicked', self.dollyin)
outbutton = gtk.Button('Dolly Out')
gtklogger.setWidgetName(outbutton, 'DollyOut')
tooltips.set_tooltip_text(
outbutton,
"Translate camera away from focal point by given factor")
dollyrow.pack_start(outbutton, expand=0, fill=1)
gtklogger.connect(outbutton, 'clicked', self.dollyout)
fillbutton = gtk.Button('Fill')
gtklogger.setWidgetName(fillbutton, 'Fill')
tooltips.set_tooltip_text(
fillbutton,
"Set camera position such that microstructure approximately fills viewport"
)
dollyrow.pack_start(fillbutton, expand=0, fill=1)
gtklogger.connect(fillbutton, 'clicked', self.dollyfill)
factorrow = gtk.HBox()
transbox.pack_start(factorrow, expand=0, fill=0, padding=2)
factorrow.pack_start(gtk.Label("Factor: "), expand=0, fill=0)
self.dollyfactor = gtk.Entry()
self.dollyfactor.set_editable(1)
self.dollyfactor.set_size_request(ndigits * guitop.top().digitsize, -1)
gtklogger.setWidgetName(self.dollyfactor, "DollyFactor")
self.dollyfactor.set_text("1.5")
tooltips.set_tooltip_text(
self.dollyfactor,
"Factor by which to multiply distance from camera to focal point")
factorrow.pack_start(self.dollyfactor, expand=1, fill=1)
# track
trackrow = gtk.HBox(homogeneous=1, spacing=2)
transbox.pack_start(trackrow, expand=0, fill=1, padding=2)
horizbutton = gtk.Button('Horizontal')
tooltips.set_tooltip_text(horizbutton,
"Shift camera and focal point horizontally")
trackrow.pack_start(horizbutton, expand=0, fill=1)
gtklogger.connect(horizbutton, 'clicked', self.trackh)
vertbutton = gtk.Button('Vertical')
tooltips.set_tooltip_text(vertbutton,
"Shift camera and focal point vertically")
trackrow.pack_start(vertbutton, expand=0, fill=1)
gtklogger.connect(vertbutton, 'clicked', self.trackv)
recenterbutton = gtk.Button('Recenter')
tooltips.set_tooltip_text(
recenterbutton, "Recenter the microstructure in the viewport")
trackrow.pack_start(recenterbutton, expand=0, fill=1)
gtklogger.connect(recenterbutton, 'clicked', self.recenter)
distrow = gtk.HBox()
transbox.pack_start(distrow, expand=0, fill=0, padding=2)
distrow.pack_start(gtk.Label("Distance: "), expand=0, fill=0)
self.trackdist = gtk.Entry()
self.trackdist.set_editable(1)
self.trackdist.set_size_request(ndigits * guitop.top().digitsize, -1)
self.trackdist.set_text("10.0")
tooltips.set_tooltip_text(
self.trackdist,
"Distance by which to track camera in units of pixels")
distrow.pack_start(self.trackdist, expand=1, fill=1)
#rotate
rotateframe = gtk.Frame("Rotation")
rotateframe.set_shadow_type(gtk.SHADOW_IN)
mainbox.pack_start(rotateframe, fill=0, expand=0)
rotatebox = gtk.VBox()
rotateframe.add(rotatebox)
rotrow1 = gtk.HBox(homogeneous=1, spacing=2)
rotatebox.pack_start(rotrow1, expand=0, fill=1, padding=2)
rollbutton = gtk.Button('Roll')
tooltips.set_tooltip_text(rollbutton,
"Rotate about direction of projection")
rotrow1.pack_start(rollbutton, expand=0, fill=1)
gtklogger.connect(rollbutton, 'clicked', self.roll)
pitchbutton = gtk.Button('Pitch')
tooltips.set_tooltip_text(
pitchbutton,
"Rotate about cross product of direction of projection and view up vector centered at camera position"
)
rotrow1.pack_start(pitchbutton, expand=0, fill=1)
gtklogger.connect(pitchbutton, 'clicked', self.pitch)
yawbutton = gtk.Button('Yaw')
tooltips.set_tooltip_text(
yawbutton,
"Rotate about view up vector centered at camera position")
rotrow1.pack_start(yawbutton, expand=0, fill=1)
gtklogger.connect(yawbutton, 'clicked', self.yaw)
rotrow2 = gtk.HBox(homogeneous=1, spacing=2)
rotatebox.pack_start(rotrow2, expand=0, fill=1, padding=2)
azbutton = gtk.Button('Azimuth')
tooltips.set_tooltip_text(
azbutton, "Rotate about view up vector centered at focal point")
rotrow2.pack_start(azbutton, expand=0, fill=1)
gtklogger.connect(azbutton, 'clicked', self.azimuth)
elbutton = gtk.Button('Elevation')
tooltips.set_tooltip_text(
elbutton,
"Rotate about cross product of direction of projection and view up vector centered at focal point"
)
rotrow2.pack_start(elbutton, expand=0, fill=1)
gtklogger.connect(elbutton, 'clicked', self.elevation)
anglerow = gtk.HBox()
rotatebox.pack_start(anglerow, expand=0, fill=0, padding=2)
anglerow.pack_start(gtk.Label("Angle: "), expand=0, fill=0)
self.angle = gtk.Entry()
self.angle.set_editable(1)
self.angle.set_size_request(ndigits * guitop.top().digitsize, -1)
self.angle.set_text("10.0")
tooltips.set_tooltip_text(self.angle,
"Angle in degrees by which to rotate by")
anglerow.pack_start(self.angle, expand=1, fill=1)
#clipping planes
clippingframe = gtk.Frame("Clipping Range")
clippingframe.set_shadow_type(gtk.SHADOW_IN)
mainbox.pack_start(clippingframe, fill=0, expand=0)
clippingbox = gtk.VBox()
clippingframe.add(clippingbox)
#self.clippingadj = gtk.Adjustment(value=100, lower=0, upper=100, step_incr=-1, page_incr=-5, page_size=0)
gtklogger.connect(toolboxGUI.clippingadj, 'value_changed',
self.updateview)
clippingscale = gtk.HScale(toolboxGUI.clippingadj)
clippingscale.set_update_policy(gtk.UPDATE_DELAYED)
tooltips.set_tooltip_text(
clippingscale,
"Adjust the near clipping plane to view cross section")
clippingbox.pack_start(clippingscale)
# save and restore
saverestoreframe = gtk.Frame("Save and Restore Views")
saverestoreframe.set_shadow_type(gtk.SHADOW_IN)
mainbox.pack_start(saverestoreframe, fill=0, expand=0)
saverestorebox = gtk.VBox()
saverestoreframe.add(saverestorebox)
viewtable = gtk.Table(columns=2, rows=2)
saverestorebox.pack_start(viewtable, fill=0, expand=0)
saveviewbutton = gtk.Button("Save View:")
tooltips.set_tooltip_text(saveviewbutton,
"Save the current view settings")
gtklogger.connect(saveviewbutton, 'clicked', self.saveview)
viewtable.attach(saveviewbutton, 0, 1, 0, 1)
self.viewname = gtk.Entry()
self.viewname.set_editable(1)
self.viewname.set_size_request(ndigits * guitop.top().digitsize, -1)
tooltips.set_tooltip_text(self.viewname,
"Enter a name for the current view")
viewtable.attach(self.viewname, 1, 2, 0, 1)
setviewlabel = gtk.Label("Set View:")
viewtable.attach(setviewlabel, 0, 1, 1, 2)
liststore = gtk.ListStore(gobject.TYPE_STRING)
self.viewmenu = gtk.ComboBox(liststore)
cell = gtk.CellRendererText()
self.viewmenu.pack_start(cell, True)
self.viewmenu.add_attribute(cell, 'text', 0)
#tooltips.set_tooltip_text(self.viewmenu,"Restore a saved view")
# menu items filled in later when saved_views is initialized
self.signal = gtklogger.connect(self.viewmenu, 'changed', self.setview)
viewtable.attach(self.viewmenu, 1, 2, 1, 2)
self.SetDefaultViews()
# position information
voxelinfoframe = gtk.Frame("Voxel Info")
voxelinfoframe.set_shadow_type(gtk.SHADOW_IN)
mainbox.pack_start(voxelinfoframe)
voxelinfobox = gtk.VBox()
voxelinfoframe.add(voxelinfobox)
voxelinfotable = gtk.Table(rows=3, columns=2)
voxelinfobox.pack_start(voxelinfotable)
label = gtk.Label('x=')
label.set_alignment(1.0, 0.5)
voxelinfotable.attach(label, 0, 1, 0, 1, xpadding=5, xoptions=gtk.FILL)
self.xtext = gtk.Entry()
self.xtext.set_size_request(ndigits * guitop.top().digitsize, -1)
voxelinfotable.attach(self.xtext,
1,
2,
0,
1,
xpadding=5,
xoptions=gtk.EXPAND | gtk.FILL)
label = gtk.Label('y=')
label.set_alignment(1.0, 0.5)
voxelinfotable.attach(label, 0, 1, 1, 2, xpadding=5, xoptions=gtk.FILL)
self.ytext = gtk.Entry()
self.ytext.set_size_request(ndigits * guitop.top().digitsize, -1)
voxelinfotable.attach(self.ytext,
1,
2,
1,
2,
xpadding=5,
xoptions=gtk.EXPAND | gtk.FILL)
label = gtk.Label('z=')
label.set_alignment(1.0, 0.5)
voxelinfotable.attach(label, 0, 1, 2, 3, xpadding=5, xoptions=gtk.FILL)
self.ztext = gtk.Entry()
self.ztext.set_size_request(ndigits * guitop.top().digitsize, -1)
voxelinfotable.attach(self.ztext,
1,
2,
2,
3,
xpadding=5,
xoptions=gtk.EXPAND | gtk.FILL)
def __init__(self, viewertoolbox):
debug.mainthreadTest()
toolboxGUI.GfxToolbox.__init__(self, "Viewer", viewertoolbox)
mainbox = gtk.VBox()
self.gtk.add(mainbox)
infoframe = gtk.Frame("Position Information")
infoframe.set_shadow_type(gtk.SHADOW_IN)
mainbox.pack_start(infoframe, fill=0, expand=0)
infotable = gtk.Table(columns=3, rows=2)
infoframe.add(infotable)
pixellabel = gtk.Label("Pixel: ")
pixellabel.set_alignment(1.0, 0.5)
self.pixel_x = gtk.Entry()
gtklogger.setWidgetName(self.pixel_x, "PixelX")
self.pixel_x.set_size_request(ndigits*guitop.top().digitsize, -1)
self.pixel_x.set_editable(0)
self.pixel_y = gtk.Entry()
gtklogger.setWidgetName(self.pixel_y, "PixelY")
self.pixel_y.set_size_request(ndigits*guitop.top().digitsize, -1)
self.pixel_y.set_editable(0)
physicallabel = gtk.Label("Physical: ")
physicallabel.set_alignment(1.0, 0.5)
self.physical_x = gtk.Entry()
gtklogger.setWidgetName(self.physical_x, "PhysicalX")
self.physical_x.set_size_request(ndigits*guitop.top().digitsize, -1)
self.physical_x.set_editable(0)
self.physical_y = gtk.Entry()
gtklogger.setWidgetName(self.physical_y, "PhysicalY")
self.physical_y.set_size_request(ndigits*guitop.top().digitsize, -1)
self.physical_y.set_editable(0)
infotable.attach(pixellabel, 0,1, 0,1, xpadding=5, ypadding=2,
xoptions=0)
infotable.attach(self.pixel_x, 1,2, 0,1, xpadding=1, ypadding=2,
xoptions=gtk.FILL|gtk.EXPAND)
infotable.attach(self.pixel_y, 2,3, 0,1, xpadding=1, ypadding=2,
xoptions=gtk.FILL|gtk.EXPAND)
infotable.attach(physicallabel, 0,1, 1,2, xpadding=5, ypadding=2,
xoptions=0)
infotable.attach(self.physical_x, 1,2, 1,2, xpadding=1, ypadding=2,
xoptions=gtk.FILL|gtk.EXPAND)
infotable.attach(self.physical_y, 2,3, 1,2, xpadding=1, ypadding=2,
xoptions=gtk.FILL|gtk.EXPAND)
zoomframe = gtk.Frame("Zoom")
gtklogger.setWidgetName(zoomframe, "Zoom")
zoomframe.set_shadow_type(gtk.SHADOW_IN)
mainbox.pack_start(zoomframe, fill=0, expand=0)
zoombox = gtk.VBox()
zoomframe.add(zoombox)
buttonrow = gtk.HBox(homogeneous=1, spacing=2)
zoombox.pack_start(buttonrow, expand=0, fill=1, padding=2)
inbutton = gtkutils.StockButton(gtk.STOCK_ZOOM_IN, 'In')
buttonrow.pack_start(inbutton, expand=0, fill=1)
gtklogger.setWidgetName(inbutton, "In")
gtklogger.connect(inbutton, 'clicked', self.inCB)
outbutton = gtkutils.StockButton(gtk.STOCK_ZOOM_OUT, 'Out')
buttonrow.pack_start(outbutton, expand=0, fill=1)
gtklogger.setWidgetName(outbutton, "Out")
gtklogger.connect(outbutton, 'clicked', self.outCB)
fillbutton = gtkutils.StockButton(gtk.STOCK_ZOOM_FIT, 'Fill')
buttonrow.pack_start(fillbutton, expand=0, fill=1)
gtklogger.setWidgetName(fillbutton, "Fill")
gtklogger.connect(fillbutton, 'clicked', self.fillCB)
factorrow = gtk.HBox()
zoombox.pack_start(factorrow, expand=0, fill=0, padding=2)
factorrow.pack_start(gtk.Label("Zoom Factor: "), expand=0, fill=0)
self.zoomfactor = gtk.Entry()
self.zoomfactor.set_editable(1)
self.zoomfactor.set_size_request(ndigits*guitop.top().digitsize, -1)
gtklogger.setWidgetName(self.zoomfactor, "Factor")
self.zfactorsignal = gtklogger.connect_passive(self.zoomfactor,"changed")
factorrow.pack_start(self.zoomfactor, expand=1, fill=1)
zoombox.pack_start(gtk.HSeparator(), fill=0, expand=0, padding=2)
label0 = gtk.Label("Shift+Click: Zoom in\nCtrl+Click: Zoom out")
label0.set_pattern(" _______\n ________\n")
label0.set_justify(gtk.JUSTIFY_LEFT)
zoombox.pack_start(label0, fill=0, expand=0, padding=2)
align = gtk.Alignment(xalign=0.5)
mainbox.pack_end(align, expand=0, fill=0, padding=2)
canvas_info = gtkutils.StockButton(gtk.STOCK_DIALOG_INFO, "Canvas Info")
gtklogger.setWidgetName(canvas_info, "Info")
gtklogger.connect(canvas_info, "clicked", self.canvas_infoCB)
tooltips.set_tooltip_text(canvas_info,
"Display canvas information in the message window.")
align.add(canvas_info)
self.currentZFactor = self.gfxwindow().zoomFactor()
switchboard.requestCallbackMain("zoom factor changed",
self.zfactorCB)
# Make sure that the Zoom commands in the graphics windows
# Settings menu use an up-to-date zoom factor.
self.gfxwindow().menu.Settings.Zoom.In.add_gui_callback(
self.wrapMenuZoom)
self.gfxwindow().menu.Settings.Zoom.Out.add_gui_callback(
self.wrapMenuZoom)
