def setUp(self):
# Default variables for test cases - Leo DM368
if test_board == "dm36x-leopard":
uboot = "u-boot-2010.12-rc2-psp03.01.01.39"
uflash_bin = "%s/bootloader/%s/src/tools/uflash/uflash" % (devdir, uboot)
ubl_file = "%s/images/ubl_DM36x_sdmmc.bin" % devdir
uboot_file = "%s/images/bootloader" % devdir
uboot_entry_addr = "0x82000000" # 2181038080
uboot_load_addr = "2181038080" # 0x82000000
kernel_image = "%s/images/kernel.uImage" % devdir
rootfs = "%s/fs/fs" % devdir
workdir = "%s/images" % devdir
bootargs = (
"davinci_enc_mngr.ch0_output=COMPONENT "
"davinci_enc_mngr.ch0_mode=1080I-30 "
"davinci_display.cont2_bufsize=13631488 "
"vpfe_capture.cont_bufoffset=13631488 "
"vpfe_capture.cont_bufsize=12582912 "
"video=davincifb:osd1=0x0x8:osd0=1920x1080x16,4050K@0,0:vid0=off:vid1=off "
"console=ttyS0,115200n8 dm365_imp.oper_mode=0 vpfe_capture.interface=1 "
"mem=83M root=/dev/mmcblk0p2 rootdelay=2 "
"rootfstype=ext3"
)
# Component installer
# TODO - Adapt to the new logic where SDCardInstaller receives a
# a Board object instead of a ComponentInstaller
# self._comp_installer = ComponentInstaller()
# self._comp_installer.uflash_bin = uflash_bin
# self._comp_installer.ubl_file = ubl_file
# self._comp_installer.uboot_file = uboot_file
# self._comp_installer.uboot_entry_addr = uboot_entry_addr
# self._comp_installer.uboot_load_addr = uboot_load_addr
# self._comp_installer.kernel_image = kernel_image
# self._comp_installer.rootfs = rootfs
# self._comp_installer.bootargs = bootargs
# self._comp_installer.workdir = workdir
if test_board == "dm816x":
uboot = "u-boot-2010.06"
self.args = argparse.Namespace()
self.args.mmap_file = "%s/images/sd-mmap.config" % devdir
self.args.uboot_min_file = "%s/images/u-boot.min.sd" % devdir
self.args.uboot_file = "%s/images/bootloader" % devdir
self.args.uboot_bootargs = (
"console=ttyO2,115200n8 "
"notifyk.vpssm3_sva=0xBF900000 root=/dev/mmcblk0p2 rootdelay=2 "
"rootfstype=ext4 mem=364M@0x80000000 mem=320M@0x9FC00000 "
"vmalloc=512M vram=81M"
)
self.args.kernel_file = "%s/images/kernel.uImage" % devdir
self.args.rootfs = "%s/fs/fs" % devdir
self.args.workdir = "%s/openfd/images" % devdir
self.args.image = "%s/images/test-sdcard.img" % devdir
self.args.imagesize_mb = 256
self.board = BoardFactory().make(test_board)
self.board.sd_init_comp_installer(self.args)
dryrun = False
interactive = False
self._test_sd = True
self._test_ld = False
# SDCard Installer
if self._test_sd:
self._inst = SDCardInstaller(board=self.board)
self._inst.enable_colors = False
self._inst.dryrun = dryrun
self._inst.interactive = interactive
self._inst.device = test_device
# LoopDevice Installer
if self._test_ld:
self._ld_inst = LoopDeviceInstaller(board=self.board)
self._ld_inst.enable_colors = False
self._ld_inst.dryrun = dryrun
self._ld_inst.interactive = interactive
self._ld_inst.device = test_device
class SDCardInstallerTestCase(unittest.TestCase):
@classmethod
def setUpClass(cls):
verbose = True
dryrun = False
logger = utils.logger.init_global_logger("SDCardInstaller")
logger.setLevel(logging.DEBUG)
streamhandler = logging.StreamHandler()
streamhandler.setFormatter(logging.Formatter("%(msg)s"))
if verbose:
streamhandler.setLevel(logging.DEBUG)
else:
streamhandler.setLevel(logging.INFO)
logger.addHandler(streamhandler)
utils.executer.init_global_executer(dryrun=dryrun, enable_colors=False, verbose=verbose)
def setUp(self):
# Default variables for test cases - Leo DM368
if test_board == "dm36x-leopard":
uboot = "u-boot-2010.12-rc2-psp03.01.01.39"
uflash_bin = "%s/bootloader/%s/src/tools/uflash/uflash" % (devdir, uboot)
ubl_file = "%s/images/ubl_DM36x_sdmmc.bin" % devdir
uboot_file = "%s/images/bootloader" % devdir
uboot_entry_addr = "0x82000000" # 2181038080
uboot_load_addr = "2181038080" # 0x82000000
kernel_image = "%s/images/kernel.uImage" % devdir
rootfs = "%s/fs/fs" % devdir
workdir = "%s/images" % devdir
bootargs = (
"davinci_enc_mngr.ch0_output=COMPONENT "
"davinci_enc_mngr.ch0_mode=1080I-30 "
"davinci_display.cont2_bufsize=13631488 "
"vpfe_capture.cont_bufoffset=13631488 "
"vpfe_capture.cont_bufsize=12582912 "
"video=davincifb:osd1=0x0x8:osd0=1920x1080x16,4050K@0,0:vid0=off:vid1=off "
"console=ttyS0,115200n8 dm365_imp.oper_mode=0 vpfe_capture.interface=1 "
"mem=83M root=/dev/mmcblk0p2 rootdelay=2 "
"rootfstype=ext3"
)
# Component installer
# TODO - Adapt to the new logic where SDCardInstaller receives a
# a Board object instead of a ComponentInstaller
# self._comp_installer = ComponentInstaller()
# self._comp_installer.uflash_bin = uflash_bin
# self._comp_installer.ubl_file = ubl_file
# self._comp_installer.uboot_file = uboot_file
# self._comp_installer.uboot_entry_addr = uboot_entry_addr
# self._comp_installer.uboot_load_addr = uboot_load_addr
# self._comp_installer.kernel_image = kernel_image
# self._comp_installer.rootfs = rootfs
# self._comp_installer.bootargs = bootargs
# self._comp_installer.workdir = workdir
if test_board == "dm816x":
uboot = "u-boot-2010.06"
self.args = argparse.Namespace()
self.args.mmap_file = "%s/images/sd-mmap.config" % devdir
self.args.uboot_min_file = "%s/images/u-boot.min.sd" % devdir
self.args.uboot_file = "%s/images/bootloader" % devdir
self.args.uboot_bootargs = (
"console=ttyO2,115200n8 "
"notifyk.vpssm3_sva=0xBF900000 root=/dev/mmcblk0p2 rootdelay=2 "
"rootfstype=ext4 mem=364M@0x80000000 mem=320M@0x9FC00000 "
"vmalloc=512M vram=81M"
)
self.args.kernel_file = "%s/images/kernel.uImage" % devdir
self.args.rootfs = "%s/fs/fs" % devdir
self.args.workdir = "%s/openfd/images" % devdir
self.args.image = "%s/images/test-sdcard.img" % devdir
self.args.imagesize_mb = 256
self.board = BoardFactory().make(test_board)
self.board.sd_init_comp_installer(self.args)
dryrun = False
interactive = False
self._test_sd = True
self._test_ld = False
# SDCard Installer
if self._test_sd:
self._inst = SDCardInstaller(board=self.board)
self._inst.enable_colors = False
self._inst.dryrun = dryrun
self._inst.interactive = interactive
self._inst.device = test_device
# LoopDevice Installer
if self._test_ld:
self._ld_inst = LoopDeviceInstaller(board=self.board)
self._ld_inst.enable_colors = False
self._ld_inst.dryrun = dryrun
self._ld_inst.interactive = interactive
self._ld_inst.device = test_device
def tearDown(self):
pass
def test_install_sd(self, dryrun=False):
if self._test_sd:
self._inst.read_partitions(self.args.mmap_file)
self._inst.format()
self._inst.mount_partitions(self.args.workdir)
self._inst.install_components()
self._inst.release()
def test_install_loopback(self, dryrun=False):
if self._test_ld:
self._ld_inst.read_partitions(self.args.mmap_file)
self.assertRaises(DeviceException, self._ld_inst.format, self.args.image, 1)
self._ld_inst.format(self.args.image, self.args.imagesize_mb)
self._ld_inst.mount_partitions(self.args.workdir)
self._ld_inst.install_components()
self._ld_inst.release()
