def event_based(job_id, assets, hazard_getter_name, hazard,
seed, vulnerability_function,
output_containers,
conditional_loss_poes, insured_losses,
imt, time_span, tses,
loss_curve_resolution, asset_correlation,
hazard_montecarlo_p):
"""
Celery task for the event based risk calculator.
:param job_id: the id of the current
:class:`openquake.engine.db.models.OqJob`
:param assets: the list of `:class:openquake.risklib.scientific.Asset`
instances considered
:param str hazard_getter_name: class name of a class defined in the
:mod:`openquake.engine.calculators.risk.hazard_getters` to be
instantiated to
get the hazard curves
:param dict hazard:
A dictionary mapping hazard Output ID to GmfCollection ID
:param seed: the seed used to initialize the rng
:param dict output_containers: a dictionary mapping hazard Output
ID to a list (a, b, c, d) where a is the ID of the
:class:`openquake.engine.db.models.LossCurve` output container used to
store the computed loss curves; b is the dictionary poe->ID of
the :class:`openquake.engine.db.models.LossMap` output container used
to store the computed loss maps; c is the same as a but for
insured losses; d is the ID of the
:class:`openquake.engine.db.models.AggregateLossCurve` output container
used to store the computed loss curves
:param conditional_loss_poes:
The poes taken into accout to compute the loss maps
:param bool insured_losses: True if insured losses should be computed
:param str imt: the imt used to filter ground motion fields
:param time_span: the time span considered
:param tses: time of the stochastic event set
:param loss_curve_resolution: the curve resolution, i.e. the
number of points which defines the loss curves
:param float asset_correlation: a number ranging from 0 to 1
representing the correlation between the generated loss ratios
"""
asset_outputs = OrderedDict()
for hazard_output_id, hazard_data in hazard.items():
hazard_id, _ = hazard_data
(loss_curve_id, loss_map_ids,
mean_loss_curve_id, quantile_loss_curve_ids,
insured_curve_id, aggregate_loss_curve_id) = (
output_containers[hazard_output_id])
hazard_getter = general.hazard_getter(
hazard_getter_name, hazard_id, imt)
calculator = api.ProbabilisticEventBased(
vulnerability_function,
curve_resolution=loss_curve_resolution,
time_span=time_span,
tses=tses,
seed=seed,
correlation=asset_correlation)
if insured_losses:
calculator = api.InsuredLosses(calculator)
# if we need to compute the loss maps, we add the proper risk
# aggregator
if conditional_loss_poes:
calculator = api.ConditionalLosses(
conditional_loss_poes, calculator)
with logs.tracing('getting hazard'):
ground_motion_fields = [hazard_getter(asset.site)
for asset in assets]
with logs.tracing('computing risk over %d assets' % len(assets)):
asset_outputs[hazard_output_id] = calculator(
assets, ground_motion_fields)
with logs.tracing('writing results'):
with db.transaction.commit_on_success(using='reslt_writer'):
for i, asset_output in enumerate(
asset_outputs[hazard_output_id]):
general.write_loss_curve(
loss_curve_id, assets[i], asset_output)
if asset_output.conditional_losses:
general.write_loss_map(
loss_map_ids, assets[i], asset_output)
if asset_output.insured_losses:
general.write_loss_curve(
insured_curve_id, assets[i], asset_output)
losses = sum(asset_output.losses
for asset_output
in asset_outputs[hazard_output_id])
general.update_aggregate_losses(
aggregate_loss_curve_id, losses)
if len(hazard) > 1 and (mean_loss_curve_id or quantile_loss_curve_ids):
weights = [data[1] for _, data in hazard.items()]
with logs.tracing('writing curve statistics'):
with db.transaction.commit_on_success(using='reslt_writer'):
for i, asset in enumerate(assets):
general.curve_statistics(
asset,
[asset_output[i].loss_ratio_curve
for asset_output in asset_outputs.values()],
weights,
mean_loss_curve_id,
quantile_loss_curve_ids,
hazard_montecarlo_p,
assume_equal="image")
base.signal_task_complete(job_id=job_id, num_items=len(assets))
def event_based(job_id, hazard,
seed, vulnerability_function,
output_containers,
conditional_loss_poes, insured_losses,
time_span, tses,
loss_curve_resolution, asset_correlation,
hazard_montecarlo_p):
"""
Celery task for the event based risk calculator.
:param job_id: the id of the current
:class:`openquake.engine.db.models.OqJob`
:param dict hazard:
A dictionary mapping IDs of
:class:`openquake.engine.db.models.Output` (with output_type set
to 'gmf_collection') to a tuple where the first element is an
instance of
:class:`..hazard_getters.GroundMotionValuesGetter`,
and the second element is the corresponding weight.
:param seed:
the seed used to initialize the rng
:param dict output_containers: a dictionary mapping hazard Output
ID to a list (a, b, c, d) where a is the ID of the
:class:`openquake.engine.db.models.LossCurve` output container used to
store the computed loss curves; b is the dictionary poe->ID of
the :class:`openquake.engine.db.models.LossMap` output container used
to store the computed loss maps; c is the same as a but for
insured losses; d is the ID of the
:class:`openquake.engine.db.models.AggregateLossCurve` output container
used to store the computed loss curves
:param conditional_loss_poes:
The poes taken into accout to compute the loss maps
:param bool insured_losses: True if insured losses should be computed
:param time_span: the time span considered
:param tses: time of the stochastic event set
:param loss_curve_resolution: the curve resolution, i.e. the
number of points which defines the loss curves
:param float asset_correlation: a number ranging from 0 to 1
representing the correlation between the generated loss ratios
"""
asset_outputs = OrderedDict()
for hazard_output_id, hazard_data in hazard.items():
hazard_getter, _ = hazard_data
(loss_curve_id, loss_map_ids,
mean_loss_curve_id, quantile_loss_curve_ids,
insured_curve_id, aggregate_loss_curve_id) = (
output_containers[hazard_output_id])
# FIXME(lp). We should not pass the exact same seed for
# different hazard
calculator = api.ProbabilisticEventBased(
vulnerability_function,
curve_resolution=loss_curve_resolution,
time_span=time_span,
tses=tses,
seed=seed,
correlation=asset_correlation)
if insured_losses:
calculator = api.InsuredLosses(calculator)
# if we need to compute the loss maps, we add the proper risk
# aggregator
if conditional_loss_poes:
calculator = api.ConditionalLosses(
conditional_loss_poes, calculator)
with logs.tracing('getting input data from db'):
assets, ground_motion_values, missings = hazard_getter()
with logs.tracing('computing risk'):
asset_outputs[hazard_output_id] = calculator(
assets, ground_motion_values)
with logs.tracing('writing results'):
with db.transaction.commit_on_success(using='reslt_writer'):
for i, asset_output in enumerate(
asset_outputs[hazard_output_id]):
general.write_loss_curve(
loss_curve_id, assets[i], asset_output)
if asset_output.conditional_losses:
general.write_loss_map(
loss_map_ids, assets[i], asset_output)
if asset_output.insured_losses:
general.write_loss_curve(
insured_curve_id, assets[i], asset_output)
losses = sum(asset_output.losses
for asset_output
in asset_outputs[hazard_output_id])
general.update_aggregate_losses(
aggregate_loss_curve_id, losses)
if len(hazard) > 1 and (mean_loss_curve_id or quantile_loss_curve_ids):
weights = [data[1] for _, data in hazard.items()]
with logs.tracing('writing curve statistics'):
with db.transaction.commit_on_success(using='reslt_writer'):
for i, asset in enumerate(assets):
general.curve_statistics(
asset,
[asset_output[i].loss_ratio_curve
for asset_output in asset_outputs.values()],
weights,
mean_loss_curve_id,
quantile_loss_curve_ids,
hazard_montecarlo_p,
assume_equal="image")
base.signal_task_complete(job_id=job_id,
num_items=len(assets) + len(missings))
def classical(job_id, hazard, vulnerability_function, output_containers,
lrem_steps_per_interval, conditional_loss_poes,
hazard_montecarlo_p):
"""
Celery task for the classical risk calculator.
Instantiates risklib calculators, computes losses for the given
assets and stores the results to db in a single transaction.
:param int job_id:
ID of the currently running job
:param dict hazard:
A dictionary mapping IDs of
:class:`openquake.engine.db.models.Output` (with output_type set
to 'hazard_curve') to a tuple where the first element is an instance of
:class:`..hazard_getters.HazardCurveGetter`, and the second element is
the corresponding weight.
:param dict output_containers: A dictionary mapping hazard
Output ID to a tuple (a, b) where a is the ID of the
:class:`openquake.engine.db.models.LossCurve` output container used to
store the computed loss curves and b is a dictionary that maps poe to ID
of the :class:`openquake.engine.db.models.LossMap` used to store
the loss maps
:param int lrem_steps_per_interval:
Steps per interval used to compute the Loss Ratio Exceedance matrix
:param conditional_loss_poes:
The poes taken into account to compute the loss maps
:param bool hazard_montecarlo_p:
(meaningful only if curve statistics are computed). Wheter or not
the hazard calculation is montecarlo based
"""
asset_outputs = OrderedDict()
calculator = api.Classical(
vulnerability_function, lrem_steps_per_interval)
for hazard_output_id, hazard_data in hazard.items():
# the second item of the tuple is the weight of the hazard (at
# this moment we are not interested in it)
hazard_getter, _ = hazard_data
(loss_curve_id, loss_map_ids,
mean_loss_curve_id, quantile_loss_curve_ids) = (
output_containers[hazard_output_id])
with logs.tracing('getting hazard'):
assets, hazard_curves, missings = hazard_getter()
with logs.tracing('computing risk over %d assets' % len(assets)):
asset_outputs[hazard_output_id] = calculator(hazard_curves)
with logs.tracing('writing results'):
with transaction.commit_on_success(using='reslt_writer'):
for i, loss_ratio_curve in enumerate(
asset_outputs[hazard_output_id]):
asset = assets[i]
# Write Loss Curves
general.write_loss_curve(
loss_curve_id, asset, loss_ratio_curve)
# Then conditional loss maps
for poe in conditional_loss_poes:
general.write_loss_map_data(
loss_map_ids[poe], asset,
scientific.conditional_loss_ratio(
loss_ratio_curve, poe))
if len(hazard) > 1 and (mean_loss_curve_id or quantile_loss_curve_ids):
weights = [data[1] for _, data in hazard.items()]
with logs.tracing('writing curve statistics'):
with transaction.commit_on_success(using='reslt_writer'):
loss_ratio_curve_matrix = asset_outputs.values()
for i, asset in enumerate(assets):
general.curve_statistics(
asset,
loss_ratio_curve_matrix[i],
weights,
mean_loss_curve_id,
quantile_loss_curve_ids,
hazard_montecarlo_p,
assume_equal="support")
base.signal_task_complete(job_id=job_id,
num_items=len(assets) + len(missings))
def event_based(job_id, hazard,
seed, vulnerability_function,
output_containers,
conditional_loss_poes, insured_losses,
time_span, tses,
loss_curve_resolution, asset_correlation,
hazard_montecarlo_p):
"""
Celery task for the event based risk calculator.
:param job_id: the id of the current
:class:`openquake.engine.db.models.OqJob`
:param dict hazard:
A dictionary mapping IDs of
:class:`openquake.engine.db.models.Output` (with output_type set
to 'gmf_collection') to a tuple where the first element is an
instance of
:class:`..hazard_getters.GroundMotionValuesGetter`,
and the second element is the corresponding weight.
:param seed:
the seed used to initialize the rng
:param dict output_containers: a dictionary mapping hazard Output
ID to a list (a, b, c, d) where a is the ID of the
:class:`openquake.engine.db.models.LossCurve` output container used to
store the computed loss curves; b is the dictionary poe->ID of
the :class:`openquake.engine.db.models.LossMap` output container used
to store the computed loss maps; c is the same as a but for
insured losses; d is the ID of the
:class:`openquake.engine.db.models.AggregateLossCurve` output container
used to store the computed loss curves
:param conditional_loss_poes:
The poes taken into accout to compute the loss maps
:param bool insured_losses: True if insured losses should be computed
:param time_span: the time span considered
:param tses: time of the stochastic event set
:param loss_curve_resolution: the curve resolution, i.e. the
number of points which defines the loss curves
:param float asset_correlation: a number ranging from 0 to 1
representing the correlation between the generated loss ratios
"""
loss_ratio_curves = OrderedDict()
event_loss_table = dict()
for hazard_output_id, hazard_data in hazard.items():
hazard_getter, _ = hazard_data
(loss_curve_id, loss_map_ids,
mean_loss_curve_id, quantile_loss_curve_ids,
insured_curve_id, aggregate_loss_curve_id) = (
output_containers[hazard_output_id])
# FIXME(lp). We should not pass the exact same seed for
# different hazard
calculator = api.ProbabilisticEventBased(
vulnerability_function,
curve_resolution=loss_curve_resolution,
time_span=time_span,
tses=tses,
seed=seed,
correlation=asset_correlation)
with logs.tracing('getting input data from db'):
assets, gmvs_ruptures, missings = hazard_getter()
if len(assets):
ground_motion_values = numpy.array(gmvs_ruptures)[:, 0]
rupture_id_matrix = numpy.array(gmvs_ruptures)[:, 1]
else:
# we are relying on the fact that if all the hazard_getter
# in this task will either return some results or they all
# return an empty result set.
logs.LOG.info("Exit from task as no asset could be processed")
base.signal_task_complete(
job_id=job_id,
event_loss_table=dict(),
num_items=len(missings))
return
with logs.tracing('computing risk'):
loss_ratio_matrix, loss_ratio_curves[hazard_output_id] = (
calculator(ground_motion_values))
with logs.tracing('writing results'):
with db.transaction.commit_on_success(using='reslt_writer'):
for i, loss_ratio_curve in enumerate(
loss_ratio_curves[hazard_output_id]):
asset = assets[i]
# loss curves
general.write_loss_curve(
loss_curve_id, asset, loss_ratio_curve)
# loss maps
for poe in conditional_loss_poes:
general.write_loss_map_data(
loss_map_ids[poe], asset,
scientific.conditional_loss_ratio(
loss_ratio_curve, poe))
# insured losses
if insured_losses:
insured_loss_curve = scientific.event_based(
scientific.insured_losses(
loss_ratio_matrix[i],
asset.value,
asset.deductible,
asset.ins_limit),
tses,
time_span,
loss_curve_resolution)
insured_loss_curve.abscissae = (
insured_loss_curve.abscissae / asset.value)
general.write_loss_curve(
insured_curve_id, asset, insured_loss_curve)
# update the event loss table of this task
for i, asset in enumerate(assets):
for j, rupture_id in enumerate(rupture_id_matrix[i]):
loss = loss_ratio_matrix[i][j] * asset.value
event_loss_table[rupture_id] = (
event_loss_table.get(rupture_id, 0) + loss)
# update the aggregate losses
aggregate_losses = sum(
loss_ratio_matrix[i] * asset.value
for i, asset in enumerate(assets))
general.update_aggregate_losses(
aggregate_loss_curve_id, aggregate_losses)
# compute mean and quantile loss curves if multiple hazard
# realizations are computed
if len(hazard) > 1 and (mean_loss_curve_id or quantile_loss_curve_ids):
weights = [data[1] for _, data in hazard.items()]
with logs.tracing('writing curve statistics'):
with db.transaction.commit_on_success(using='reslt_writer'):
loss_ratio_curve_matrix = loss_ratio_curves.values()
# here we are relying on the fact that assets do not
# change across different logic tree realizations (as
# the hazard grid does not change, so the hazard
# getters always returns the same assets)
for i, asset in enumerate(assets):
general.curve_statistics(
asset,
loss_ratio_curve_matrix[i],
weights,
mean_loss_curve_id,
quantile_loss_curve_ids,
hazard_montecarlo_p,
assume_equal="image")
base.signal_task_complete(job_id=job_id,
num_items=len(assets) + len(missings),
event_loss_table=event_loss_table)
def classical(job_id, assets, hazard_getter_name, hazard,
vulnerability_function,
output_containers,
lrem_steps_per_interval, conditional_loss_poes,
hazard_montecarlo_p):
"""
Celery task for the classical risk calculator.
Instantiates risklib calculators, computes losses for the given
assets and stores the results to db in a single transaction.
:param int job_id:
ID of the currently running job
:param assets:
iterator over :class:`openquake.engine.db.models.ExposureData` to take
into account
:param str hazard_getter_name: class name of a class defined in the
:mod:`openquake.engine.calculators.risk.hazard_getters` to be
instantiated to get the hazard curves
:param dict hazard:
A dictionary mapping hazard Output ID to HazardCurve ID
:param dict output_containers: A dictionary mapping hazard
Output ID to a tuple (a, b) where a is the ID of the
:class:`openquake.engine.db.models.LossCurve` output container used to
store the computed loss curves and b is a dictionary that maps poe to ID
of the :class:`openquake.engine.db.models.LossMap` used to store
the loss maps
:param int lrem_steps_per_interval:
Steps per interval used to compute the Loss Ratio Exceedance matrix
:param conditional_loss_poes:
The poes taken into account to compute the loss maps
:param bool hazard_montecarlo_p:
(meaningful only if curve statistics are computed). Wheter or not
the hazard calculation is montecarlo based
"""
asset_outputs = OrderedDict()
for hazard_output_id, hazard_data in hazard.items():
hazard_id, _ = hazard_data
(loss_curve_id, loss_map_ids,
mean_loss_curve_id, quantile_loss_curve_ids) = (
output_containers[hazard_output_id])
hazard_getter = general.hazard_getter(hazard_getter_name, hazard_id)
calculator = api.Classical(
vulnerability_function, lrem_steps_per_interval)
# if we need to compute the loss maps, we add the proper risk
# aggregator
if conditional_loss_poes:
calculator = api.ConditionalLosses(
conditional_loss_poes, calculator)
with logs.tracing('getting hazard'):
hazard_curves = [hazard_getter(asset.site) for asset in assets]
with logs.tracing('computing risk over %d assets' % len(assets)):
asset_outputs[hazard_output_id] = calculator(assets, hazard_curves)
with logs.tracing('writing results'):
with transaction.commit_on_success(using='reslt_writer'):
for i, asset_output in enumerate(
asset_outputs[hazard_output_id]):
general.write_loss_curve(
loss_curve_id, assets[i], asset_output)
if asset_output.conditional_losses:
general.write_loss_map(
loss_map_ids, assets[i], asset_output)
if len(hazard) > 1 and (mean_loss_curve_id or quantile_loss_curve_ids):
weights = [data[1] for _, data in hazard.items()]
with logs.tracing('writing curve statistics'):
with transaction.commit_on_success(using='reslt_writer'):
for i, asset in enumerate(assets):
general.curve_statistics(
asset,
[asset_output[i].loss_ratio_curve
for asset_output in asset_outputs.values()],
weights,
mean_loss_curve_id,
quantile_loss_curve_ids,
hazard_montecarlo_p,
assume_equal="support")
base.signal_task_complete(job_id=job_id, num_items=len(assets))
