def main(run_daemon=False):
# Split arguments, require at least a command
execname = sys.argv.pop(0)
if run_daemon:
if len(sys.argv) != 1:
_exit_error(execname,
"Extra arguments to daemon",
RC_NOCOMMAND,
log=False)
else:
if len(sys.argv) < 2:
_exit_error(execname,
"No command specified",
RC_NOCOMMAND,
log=False)
configfile = sys.argv.pop(0)
# Load configuration
try:
rawconfig = moves.configparser.RawConfigParser()
rawconfig.read(configfile)
config = wrapper.RootwrapConfig(rawconfig)
except ValueError as exc:
msg = "Incorrect value in %s: %s" % (configfile, exc.message)
_exit_error(execname, msg, RC_BADCONFIG, log=False)
except moves.configparser.Error:
_exit_error(execname,
"Incorrect configuration file: %s" % configfile,
RC_BADCONFIG,
log=False)
if config.use_syslog:
wrapper.setup_syslog(execname, config.syslog_log_facility,
config.syslog_log_level)
filters = wrapper.load_filters(config.filters_path)
if run_daemon:
daemon_mod.daemon_start(config, filters)
else:
run_one_command(execname, config, filters, sys.argv)
def main(run_daemon=False):
# Split arguments, require at least a command
execname = sys.argv.pop(0)
if run_daemon:
if len(sys.argv) != 1:
_exit_error(execname, "Extra arguments to daemon", RC_NOCOMMAND,
log=False)
else:
if len(sys.argv) < 2:
_exit_error(execname, "No command specified", RC_NOCOMMAND,
log=False)
configfile = sys.argv.pop(0)
# Load configuration
try:
rawconfig = moves.configparser.RawConfigParser()
rawconfig.read(configfile)
config = wrapper.RootwrapConfig(rawconfig)
except ValueError as exc:
msg = "Incorrect value in %s: %s" % (configfile, exc.message)
_exit_error(execname, msg, RC_BADCONFIG, log=False)
except moves.configparser.Error:
_exit_error(execname, "Incorrect configuration file: %s" % configfile,
RC_BADCONFIG, log=False)
if config.use_syslog:
wrapper.setup_syslog(execname,
config.syslog_log_facility,
config.syslog_log_level)
filters = wrapper.load_filters(config.filters_path)
if run_daemon:
# NOTE(dims): When not running as daemon, this import
# slows us down just a bit. So moving it here so we have
# it only when we need it.
from oslo_rootwrap import daemon as daemon_mod
daemon_mod.daemon_start(config, filters)
else:
run_one_command(execname, config, filters, sys.argv)
def main(run_daemon=False):
# Split arguments, require at least a command
execname = sys.argv.pop(0)
if run_daemon:
if len(sys.argv) != 1:
_exit_error(execname, "Extra arguments to daemon", RC_NOCOMMAND,
log=False)
else:
if len(sys.argv) < 2:
_exit_error(execname, "No command specified", RC_NOCOMMAND,
log=False)
configfile = sys.argv.pop(0)
# Load configuration
try:
rawconfig = moves.configparser.RawConfigParser()
rawconfig.read(configfile)
config = wrapper.RootwrapConfig(rawconfig)
except ValueError as exc:
msg = "Incorrect value in %s: %s" % (configfile, exc.args[0])
_exit_error(execname, msg, RC_BADCONFIG, log=False)
except moves.configparser.Error:
_exit_error(execname, "Incorrect configuration file: %s" % configfile,
RC_BADCONFIG, log=False)
if config.use_syslog:
wrapper.setup_syslog(execname,
config.syslog_log_facility,
config.syslog_log_level)
filters = wrapper.load_filters(config.filters_path)
if run_daemon:
# NOTE(dims): When not running as daemon, this import
# slows us down just a bit. So moving it here so we have
# it only when we need it.
from oslo_rootwrap import daemon as daemon_mod
daemon_mod.daemon_start(config, filters)
else:
run_one_command(execname, config, filters, sys.argv)
def main(run_daemon=False):
# Split arguments, require at least a command
execname = sys.argv.pop(0)
if run_daemon:
if len(sys.argv) != 1:
_exit_error(execname, "Extra arguments to daemon", RC_NOCOMMAND,
log=False)
else:
if len(sys.argv) < 2:
_exit_error(execname, "No command specified", RC_NOCOMMAND,
log=False)
configfile = sys.argv.pop(0)
# Load configuration
try:
rawconfig = moves.configparser.RawConfigParser()
rawconfig.read(configfile)
config = wrapper.RootwrapConfig(rawconfig)
except ValueError as exc:
msg = "Incorrect value in %s: %s" % (configfile, exc.message)
_exit_error(execname, msg, RC_BADCONFIG, log=False)
except moves.configparser.Error:
_exit_error(execname, "Incorrect configuration file: %s" % configfile,
RC_BADCONFIG, log=False)
if config.use_syslog:
wrapper.setup_syslog(execname,
config.syslog_log_facility,
config.syslog_log_level)
filters = wrapper.load_filters(config.filters_path)
if run_daemon:
daemon_mod.daemon_start(config, filters)
else:
run_one_command(execname, config, filters, sys.argv)
def main(run_daemon=False):
# Split arguments, require at least a command
execname = sys.argv.pop(0)
if run_daemon:
if len(sys.argv) != 1:
_exit_error(execname,
"Extra arguments to daemon",
RC_NOCOMMAND,
log=False)
else:
if len(sys.argv) < 2:
_exit_error(execname,
"No command specified",
RC_NOCOMMAND,
log=False)
configfile = sys.argv.pop(0)
# Load configuration
try:
rawconfig = moves.configparser.RawConfigParser()
rawconfig.read(configfile)
config = wrapper.RootwrapConfig(rawconfig)
except ValueError as exc:
msg = "Incorrect value in %s: %s" % (configfile, exc.args[0])
_exit_error(execname, msg, RC_BADCONFIG, log=False)
except moves.configparser.Error:
_exit_error(execname,
"Incorrect configuration file: %s" % configfile,
RC_BADCONFIG,
log=False)
if resource:
# When use close_fds=True on Python 2.x, calling subprocess with
# close_fds=True (which we do by default) can be inefficient when
# the current fd ulimits are large, because it blindly closes
# all fds in the range(1, $verylargenumber)
# Lower our ulimit to a reasonable value to regain performance.
fd_limits = resource.getrlimit(resource.RLIMIT_NOFILE)
sensible_fd_limit = min(config.rlimit_nofile, fd_limits[0])
if (fd_limits[0] > sensible_fd_limit):
# Close any fd beyond sensible_fd_limit prior adjusting our
# rlimit to ensure all fds are closed
for fd_entry in os.listdir('/proc/self/fd'):
# NOTE(dmllr): In a previous patch revision non-numeric
# dir entries were silently ignored which reviewers
# didn't like. Readd exception handling when it occurs.
fd = int(fd_entry)
if fd >= sensible_fd_limit:
os.close(fd)
# Unfortunately this inherits to our children, so allow them to
# re-raise by passing through the hard limit unmodified
resource.setrlimit(resource.RLIMIT_NOFILE,
(sensible_fd_limit, fd_limits[1]))
# This is set on import to the hard ulimit. if its defined we
# already have imported it, so we need to update it to the new
# limit.
if (hasattr(subprocess, 'MAXFD')
and subprocess.MAXFD > sensible_fd_limit):
subprocess.MAXFD = sensible_fd_limit
if config.use_syslog:
wrapper.setup_syslog(execname, config.syslog_log_facility,
config.syslog_log_level)
filters = wrapper.load_filters(config.filters_path)
if run_daemon:
# NOTE(dims): When not running as daemon, this import
# slows us down just a bit. So moving it here so we have
# it only when we need it.
from oslo_rootwrap import daemon as daemon_mod
daemon_mod.daemon_start(config, filters)
else:
run_one_command(execname, config, filters, sys.argv)
def main(run_daemon=False):
# Split arguments, require at least a command
execname = sys.argv.pop(0)
if run_daemon:
if len(sys.argv) != 1:
_exit_error(execname, "Extra arguments to daemon", RC_NOCOMMAND,
log=False)
else:
if len(sys.argv) < 2:
_exit_error(execname, "No command specified", RC_NOCOMMAND,
log=False)
configfile = sys.argv.pop(0)
# Load configuration
try:
rawconfig = moves.configparser.RawConfigParser()
rawconfig.read(configfile)
config = wrapper.RootwrapConfig(rawconfig)
except ValueError as exc:
msg = "Incorrect value in %s: %s" % (configfile, exc.args[0])
_exit_error(execname, msg, RC_BADCONFIG, log=False)
except moves.configparser.Error:
_exit_error(execname, "Incorrect configuration file: %s" % configfile,
RC_BADCONFIG, log=False)
if resource:
# When use close_fds=True on Python 2.x, calling subprocess with
# close_fds=True (which we do by default) can be inefficient when
# the current fd ulimits are large, because it blindly closes
# all fds in the range(1, $verylargenumber)
# Lower our ulimit to a reasonable value to regain performance.
fd_limits = resource.getrlimit(resource.RLIMIT_NOFILE)
sensible_fd_limit = min(config.rlimit_nofile, fd_limits[0])
if (fd_limits[0] > sensible_fd_limit):
# Close any fd beyond sensible_fd_limit prior adjusting our
# rlimit to ensure all fds are closed
for fd_entry in os.listdir('/proc/self/fd'):
# NOTE(dmllr): In a previous patch revision non-numeric
# dir entries were silently ignored which reviewers
# didn't like. Readd exception handling when it occurs.
fd = int(fd_entry)
if fd >= sensible_fd_limit:
os.close(fd)
# Unfortunately this inherits to our children, so allow them to
# re-raise by passing through the hard limit unmodified
resource.setrlimit(
resource.RLIMIT_NOFILE, (sensible_fd_limit, fd_limits[1]))
# This is set on import to the hard ulimit. if its defined we
# already have imported it, so we need to update it to the new
# limit.
if (hasattr(subprocess, 'MAXFD') and
subprocess.MAXFD > sensible_fd_limit):
subprocess.MAXFD = sensible_fd_limit
if config.use_syslog:
wrapper.setup_syslog(execname,
config.syslog_log_facility,
config.syslog_log_level)
filters = wrapper.load_filters(config.filters_path)
if run_daemon:
# NOTE(dims): When not running as daemon, this import
# slows us down just a bit. So moving it here so we have
# it only when we need it.
from oslo_rootwrap import daemon as daemon_mod
daemon_mod.daemon_start(config, filters)
else:
run_one_command(execname, config, filters, sys.argv)
