def create_side(x_z_top_left, x_z_bottom_right, static=True):
x1, z1 = x_z_top_left
x2, z2 = x_z_bottom_right
format = GeomVertexFormat.getV3n3c4t2()
vdata = GeomVertexData('', format, Geom.UHStatic)
vertex = GeomVertexWriter(vdata, 'vertex')
normal = GeomVertexWriter(vdata, 'normal')
vertex.addData3f(x1, 0, z1) # top left
vertex.addData3f(x2, 0, z1) # top right
vertex.addData3f(x2, 0, z2) # bottom right
vertex.addData3f(x1, 0, z2) # bottom left
for _i in range(4):
normal.addData3f(0, - 1, 0)
if static:
prim_hint = Geom.UHStatic
else:
prim_hint = Geom.UHDynamic
prim = GeomTristrips(prim_hint)
prim.addVertices(1, 0, 2, 3)
prim.closePrimitive()
geom = Geom(vdata)
geom.addPrimitive(prim)
node = GeomNode('')
node.addGeom(geom)
return (node, vdata)
def create_triangle(x_z_left, x_z_top, x_z_right, static=True):
x1,z1 = x_z_left
x2,z2 = x_z_top
x3,z3 = x_z_right
format = GeomVertexFormat.getV3n3c4t2()
vdata=GeomVertexData('', format, Geom.UHStatic)
vertex=GeomVertexWriter(vdata, 'vertex')
normal=GeomVertexWriter(vdata, 'normal')
vertex.addData3f(x1, 0, z1) # left
vertex.addData3f(x2, 0, z2) # top
vertex.addData3f(x3, 0, z3) # right
for _i in range(3):
normal.addData3f(0,-1,0)
if static:
prim_hint = Geom.UHStatic
else:
prim_hint = Geom.UHDynamic
prim = GeomTriangles(prim_hint)
prim.addVertices(0,2,1)
prim.closePrimitive()
geom = Geom(vdata)
geom.addPrimitive(prim)
node = GeomNode('')
node.addGeom(geom)
return node
def __init__(self):
# GeomNode to hold our individual geoms
self.gnode = GeomNode('wirePrim')
# How many times to subdivide our spheres/cylinders resulting vertices. Keep low
# because this is supposed to be an approximate representation
self.subdiv = 12
def __init__(self, width=1, depth=1, height=1, origin=Point3(0, 0, 0)):
# Create vetex data format
gvf = GeomVertexFormat.getV3n3()
gvd = GeomVertexData("vertexData", gvf, Geom.UHStatic)
# Create vetex writers for each type of data we are going to store
gvwV = GeomVertexWriter(gvd, "vertex")
gvwN = GeomVertexWriter(gvd, "normal")
# Write out all points
for p in GetPointsForBox(width, depth, height):
gvwV.addData3f(Point3(p) - origin)
# Write out all the normals
for n in ((-1, 0, 0), (1, 0, 0), (0, -1, 0), (0, 1, 0), (0, 0, -1), (0, 0, 1)):
for i in range(4):
gvwN.addData3f(n)
geom = Geom(gvd)
for i in range(0, gvwV.getWriteRow(), 4):
# Create and add both triangles
geom.addPrimitive(GetGeomTriangle(i, i + 1, i + 2))
geom.addPrimitive(GetGeomTriangle(i, i + 2, i + 3))
# Init the node path, wrapping the box
geomNode = GeomNode("box")
geomNode.addGeom(geom)
NodePath.__init__(self, geomNode)
def init_node_path(self):
if self.node_path:
self.node_path.remove()
vdata = GeomVertexData('name_me', self.format, Geom.UHStatic)
vertex = GeomVertexWriter(vdata, 'vertex')
color = GeomVertexWriter(vdata, 'color')
primitive = GeomTristrips(Geom.UHStatic)
film_size = base.cam.node().getLens().getFilmSize()
x = film_size.getX() / 2.0
z = x * 0.75
vertex.addData3f(-x, 10000, z)
vertex.addData3f(x, 10000, z)
vertex.addData3f(-x, 10000, -z)
vertex.addData3f(x, 10000, -z)
color.addData4f(*[x / 255.0 for x in self.color1] + [1.0])
color.addData4f(*[x / 255.0 for x in self.color1] + [1.0])
color.addData4f(*[x / 255.0 for x in self.color2] + [1.0])
color.addData4f(*[x / 255.0 for x in self.color2] + [1.0])
primitive.addNextVertices(4)
primitive.closePrimitive()
geom = Geom(vdata)
geom.addPrimitive(primitive)
node = GeomNode('gnode')
node.addGeom(geom)
self.node_path = base.camera.attachNewNode(node)
def create_side(x_z_top_left, x_z_bottom_right, static=True):
x1, z1 = x_z_top_left
x2, z2 = x_z_bottom_right
format = GeomVertexFormat.getV3n3c4t2()
vdata = GeomVertexData('', format, Geom.UHStatic)
vertex = GeomVertexWriter(vdata, 'vertex')
normal = GeomVertexWriter(vdata, 'normal')
vertex.addData3f(x1, 0, z1) # top left
vertex.addData3f(x2, 0, z1) # top right
vertex.addData3f(x2, 0, z2) # bottom right
vertex.addData3f(x1, 0, z2) # bottom left
for _i in range(4):
normal.addData3f(0, - 1, 0)
if static:
prim_hint = Geom.UHStatic
else:
prim_hint = Geom.UHDynamic
prim = GeomTristrips(prim_hint)
prim.addVertices(1, 0, 2, 3)
prim.closePrimitive()
geom = Geom(vdata)
geom.addPrimitive(prim)
node = GeomNode('')
node.addGeom(geom)
return (node, vdata)
def init_node_path_line(self, light_number):
if self.node_path_line:
self.node_path_line.remove()
vdata = GeomVertexData('name_me', self.format, Geom.UHStatic)
vertex = GeomVertexWriter(vdata, 'vertex')
color = GeomVertexWriter(vdata, 'color')
primitive = GeomLines(Geom.UHStatic)
vertex.addData3f(*coords_to_panda(0, 0, 0))
vertex.addData3f(*coords_to_panda(*self.direction.coords))
if light_number == 0:
line_color = (0.0, 1.0, 1.0, 1.0)
elif light_number == 1:
line_color = (1.0, 0.0, 1.0, 1.0)
elif light_number == 2:
line_color = (1.0, 1.0, 0.0, 1.0)
color.addData4f(*line_color)
color.addData4f(*line_color)
primitive.addNextVertices(2)
primitive.closePrimitive()
geom = Geom(vdata)
geom.addPrimitive(primitive)
node = GeomNode('gnode')
node.addGeom(geom)
self.node_path_line = self.parent.node_path_ui.attachNewNode(node)
self.node_path_line.setScale(1000)
self.node_path_line.setPos(100, 100, 0)
self.show_line(self.parent.parent.lights_edit_window.IsShown())
def create_triangle(x_z_left, x_z_top, x_z_right, static=True):
x1,z1 = x_z_left
x2,z2 = x_z_top
x3,z3 = x_z_right
format = GeomVertexFormat.getV3n3c4t2()
vdata=GeomVertexData('', format, Geom.UHStatic)
vertex=GeomVertexWriter(vdata, 'vertex')
normal=GeomVertexWriter(vdata, 'normal')
vertex.addData3f(x1, 0, z1) # left
vertex.addData3f(x2, 0, z2) # top
vertex.addData3f(x3, 0, z3) # right
for _i in range(3):
normal.addData3f(0,-1,0)
if static:
prim_hint = Geom.UHStatic
else:
prim_hint = Geom.UHDynamic
prim = GeomTriangles(prim_hint)
prim.addVertices(0,2,1)
prim.closePrimitive()
geom = Geom(vdata)
geom.addPrimitive(prim)
node = GeomNode('')
node.addGeom(geom)
return node
def init_node_path(self):
if self.node_path:
self.node_path.remove()
vdata = GeomVertexData('name_me', self.format, Geom.UHStatic)
vertex = GeomVertexWriter(vdata, 'vertex')
color = GeomVertexWriter(vdata, 'color')
primitive = GeomLines(Geom.UHStatic)
vertex.addData3f(*coords_to_panda(0, 0, 0))
vertex.addData3f(*coords_to_panda(1000, 0, 0))
vertex.addData3f(*coords_to_panda(0, 0, 0))
vertex.addData3f(*coords_to_panda(0, -1000, 0))
vertex.addData3f(*coords_to_panda(0, 0, 0))
vertex.addData3f(*coords_to_panda(0, 0, 1000))
color.addData4f(1.0, 0.0, 0.0, 1.0)
color.addData4f(1.0, 0.0, 0.0, 1.0)
color.addData4f(0.0, 1.0, 0.0, 1.0)
color.addData4f(0.0, 1.0, 0.0, 1.0)
color.addData4f(0.0, 0.0, 1.0, 1.0)
color.addData4f(0.0, 0.0, 1.0, 1.0)
primitive.addNextVertices(6)
primitive.closePrimitive()
geom = Geom(vdata)
geom.addPrimitive(primitive)
node = GeomNode('gnode')
node.addGeom(geom)
self.node_path = self.parent.node_path_ui.attachNewNode(node)
def generate(self):
format = GeomVertexFormat.getV3()
data = GeomVertexData("Data", format, Geom.UHStatic)
vertices = GeomVertexWriter(data, "vertex")
vertices.addData3f(-self.w, -self.h, -self.d)
vertices.addData3f(+self.w, -self.h, -self.d)
vertices.addData3f(-self.w, +self.h, -self.d)
vertices.addData3f(+self.w, +self.h, -self.d)
vertices.addData3f(-self.w, -self.h, +self.d)
vertices.addData3f(+self.w, -self.h, +self.d)
vertices.addData3f(-self.w, +self.h, +self.d)
vertices.addData3f(+self.w, +self.h, +self.d)
triangles = GeomTriangles(Geom.UHStatic)
def addQuad(v0, v1, v2, v3):
triangles.addVertices(v0, v1, v2)
triangles.addVertices(v0, v2, v3)
triangles.closePrimitive()
addQuad(4, 5, 7, 6) # Z+
addQuad(0, 2, 3, 1) # Z-
addQuad(3, 7, 5, 1) # X+
addQuad(4, 6, 2, 0) # X-
addQuad(2, 6, 7, 3) # Y+
addQuad(0, 1, 5, 4) # Y+
geom = Geom(data)
geom.addPrimitive(triangles)
node = GeomNode("BoxMaker")
node.addGeom(geom)
return NodePath(node)
def draw(self):
format=GeomVertexFormat.getV3n3cpt2()
vdata=GeomVertexData('square', format, Geom.UHDynamic)
vertex=GeomVertexWriter(vdata, 'vertex')
normal=GeomVertexWriter(vdata, 'normal')
color=GeomVertexWriter(vdata, 'color')
circle=Geom(vdata)
# Create vertices
vertex.addData3f(self.pos)
color.addData4f(self.color)
for v in range(self._EDGES):
x = self.pos.getX() + (self.size * math.cos((2*math.pi/self._EDGES)*v))
y = self.pos.getY() + (self.size * math.sin((2*math.pi/self._EDGES)*v))
z = self.pos.getZ()
vertex.addData3f(x, y, z)
color.addData4f(self.color)
# Create triangles
for t in range(self._EDGES):
tri = GeomTriangles(Geom.UHDynamic)
tri.addVertex(0)
tri.addVertex(t+1)
if (t+2) > self._EDGES:
tri.addVertex(1)
else:
tri.addVertex(t+2)
tri.closePrimitive()
circle.addPrimitive(tri)
gn = GeomNode('Circle')
gn.addGeom(circle)
np = NodePath(gn)
np.setHpr(0, 90, 0)
return np
def create_hexagon(radius):
""" Creates a hexagon shape that is centered at (0,0,0) with the corners having a distance of radius to the center and
the normals pointing in direction (0,-1,0).
Returns the tuple (PandaNode, GeomVertexData). """
format = GeomVertexFormat.getV3n3c4t2()
vdata=GeomVertexData('hexagon', format, Geom.UHStatic)
vertex=GeomVertexWriter(vdata, 'vertex')
normal=GeomVertexWriter(vdata, 'normal')
# create the vertices
vertex.addData3f(0,0,0)
normal.addData3f(0,-1,0)
# add the other vertices
for phi in range(0,360,60):
# right-hand-rule (with middle finger pointing upwards): the y-axis points towards the screen,
# therefore the hexagon will be created in the x,z plane, with x-axis pointing to the right
# and the z-axis pointing up
# get the next vertex coordinates by rotating the point (0,0,radius) in the x,z plane
x,z = rotate_phi_degrees_counter_clockwise(phi, (0,radius))
#print (x,z)
vertex.addData3f(x,0,z)
normal.addData3f(0,-1,0) # the normal vector points away from the screen
# add the vertices to a geometry primitives
prim = GeomTrifans(Geom.UHStatic)
for i in range(7):
prim.addVertex(i)
prim.addVertex(1)
prim.closePrimitive()
geom = Geom(vdata)
geom.addPrimitive(prim)
hex_node = GeomNode('')
hex_node.addGeom(geom)
return hex_node, vdata
def create_hexagon(radius):
""" Creates a hexagon shape that is centered at (0,0,0) with the corners having a distance of radius to the center and
the normals pointing in direction (0,-1,0).
Returns the tuple (PandaNode, GeomVertexData). """
format = GeomVertexFormat.getV3n3c4t2()
vdata=GeomVertexData('hexagon', format, Geom.UHStatic)
vertex=GeomVertexWriter(vdata, 'vertex')
normal=GeomVertexWriter(vdata, 'normal')
# create the vertices
vertex.addData3f(0,0,0)
normal.addData3f(0,-1,0)
# add the other vertices
for phi in range(0,360,60):
# right-hand-rule (with middle finger pointing upwards): the y-axis points towards the screen,
# therefore the hexagon will be created in the x,z plane, with x-axis pointing to the right
# and the z-axis pointing up
# get the next vertex coordinates by rotating the point (0,0,radius) in the x,z plane
x,z = rotate_phi_degrees_counter_clockwise(phi, (0,radius))
#print (x,z)
vertex.addData3f(x,0,z)
normal.addData3f(0,-1,0) # the normal vector points away from the screen
# add the vertices to a geometry primitives
prim = GeomTrifans(Geom.UHStatic)
for i in range(7):
prim.addVertex(i)
prim.addVertex(1)
prim.closePrimitive()
geom = Geom(vdata)
geom.addPrimitive(prim)
hex_node = GeomNode('')
hex_node.addGeom(geom)
return hex_node, vdata
def createPitchLineOld(self,points=[0.5,0.25,-0.25,-0.5],
tick=0.00,colour=None):
""" create a line to hint at the pitch of the aircraft on the hud """
if colour is None:
colour = self.colour
l = LineNodePath(aspect2d,'pitchline',4,Vec4(colour[0],colour[1],
colour[2],colour[3]))
plist = []
for p in points:
plist.append((p,0.0,0.0))
plist.insert(0,(points[0],0.0,tick))
plist.append((points[3],0.0,tick))
linelist = []
linelist = [[plist[p],plist[p+1]] for p in range(len(plist)-1)]
linelist.pop(2)
l.drawLines(linelist)
l.create()
# These lines are drawn from scratch rather than using a graphic file
format = GeomVertexFormat.getV3()
vdata = GeomVertexData("vertices",format,Geom.UHStatic)
# create vertices to add to use in creating lines
vertexWriter=GeomVertexWriter(vdata,"vertex")
# here we define enough positions to create two separated lines
for p in points:
vertexWriter.addData3f(p,0.0,0.0)
# and another two positions for the 'ticks' at the line ends
vertexWriter.addData3f(points[0],0.0,tick)
vertexWriter.addData3f(points[3],0.0,tick)
# create the primitives
line = GeomLines(Geom.UHStatic)
line.addVertices(4,0) # the tick part
line.addVertices(0,1) # part of the horizontal line
line.closePrimitive()
line2 = GeomLines(Geom.UHStatic)
line2.addVertices(2,3) # other part of the horizontal line
line2.addVertices(3,5) # second tick
line2.closePrimitive()
# add the lines to a geom object
lineGeom = Geom(vdata)
lineGeom.addPrimitive(line)
lineGeom.addPrimitive(line2)
# create the node..
lineGN=GeomNode("splitline")
lineGN.addGeom(lineGeom)
# and parent the node to aspect2d
lineNP = aspect2d.attachNewNode(lineGN)
return lineNP
def __init__(self, name):
GeomNode.__init__(self, name)
ls = LineSegs()
ls.setThickness(5)
ls.drawTo(Point3(0, 0, 0))
ls.drawTo(Point3(100, 100, 100))
self.addGeomsFrom(ls.create())
print ls
def init_node_path(self):
if self.node_path:
self.node_path.remove()
polygon = self.source
vdata = GeomVertexData('name_me', self.format, Geom.UHStatic)
vertex = GeomVertexWriter(vdata, 'vertex')
normal = GeomVertexWriter(vdata, 'normal')
color = GeomVertexWriter(vdata, 'color')
texcoord = GeomVertexWriter(vdata, 'texcoord')
primitive = GeomTristrips(Geom.UHStatic)
vertex.addData3f(*coords_to_panda(*polygon.A.point.coords))
vertex.addData3f(*coords_to_panda(*polygon.B.point.coords))
vertex.addData3f(*coords_to_panda(*polygon.C.point.coords))
if hasattr(polygon, 'D'):
vertex.addData3f(*coords_to_panda(*polygon.D.point.coords))
else:
vertex.addData3f(*coords_to_panda(*polygon.C.point.coords))
if polygon.A.normal:
normal.addData3f(*coords_to_panda(*polygon.A.normal.coords))
normal.addData3f(*coords_to_panda(*polygon.B.normal.coords))
normal.addData3f(*coords_to_panda(*polygon.C.normal.coords))
if hasattr(polygon, 'D'):
normal.addData3f(*coords_to_panda(*polygon.D.normal.coords))
if polygon.A.normal:
gray = 1.0
else:
gray = 0.0
self.old_color = (gray, gray, gray, 1.0)
color.addData4f(gray, gray, gray, 1.0)
color.addData4f(gray, gray, gray, 1.0)
color.addData4f(gray, gray, gray, 1.0)
if hasattr(polygon, 'D'):
color.addData4f(gray, gray, gray, 1.0)
if polygon.A.texcoord:
pal = ((polygon.texture_palette + 1) * 256)
texcoord_A = uv_to_panda2(polygon, pal, *polygon.A.texcoord.coords)
texcoord_B = uv_to_panda2(polygon, pal, *polygon.B.texcoord.coords)
texcoord_C = uv_to_panda2(polygon, pal, *polygon.C.texcoord.coords)
texcoord.addData2f(*texcoord_A)
texcoord.addData2f(*texcoord_B)
texcoord.addData2f(*texcoord_C)
if hasattr(polygon, 'D'):
texcoord_D = uv_to_panda2(polygon, pal, *polygon.D.texcoord.coords)
texcoord.addData2f(*texcoord_D)
primitive.addNextVertices(4)
primitive.closePrimitive()
geom = Geom(vdata)
geom.addPrimitive(primitive)
node = GeomNode('gnode')
node.addGeom(geom)
self.node_path = self.parent.node_path_mesh.attachNewNode(node)
def __init__(self, name, halfedge_mesh, color, wireframe=False):
GeomNode.__init__(self, name)
self._halfedge_mesh = halfedge_mesh
self._color = color
self._wireframe = wireframe
self._create_vertex_data()
self._create_geoms()
# set visualisation parameters
if self._wireframe:
self.setAttrib(RenderModeAttrib.make(RenderModeAttrib.MWireframe, 2, 1))
self.setAttrib(CullFaceAttrib.make(CullFaceAttrib.MCullNone))
def __init__(self, name, points, color=(1.0,1.0,1.0,1.0)):
GeomNode.__init__(self, name)
self._points = points
self._color = color
self._create_vertex_data()
self._create_geom_primitives()
self._create_geoms()
# set visualisation parameters
#if self._wireframe:
# self.setAttrib(RenderModeAttrib.make(RenderModeAttrib.MWireframe, 2, 1))
#self.setAttrib(CullFaceAttrib.make(CullFaceAttrib.MCullNone))
self.setAttrib(RenderModeAttrib.make(RenderModeAttrib.MWireframe, 2, 0))
def __init__(self, radius=1.0, height=1.0, numSegs=16, degrees=360, axis=Vec3(0, 0, 1), origin=Point3(0, 0, 0)):
# Create vetex data format
gvf = GeomVertexFormat.getV3n3()
gvd = GeomVertexData("vertexData", gvf, Geom.UHStatic)
# Create vetex writers for each type of data we are going to store
gvwV = GeomVertexWriter(gvd, "vertex")
gvwN = GeomVertexWriter(gvd, "normal")
# Get the points for an arc
points = GetPointsForArc(degrees, numSegs, True)
for i in range(len(points) - 1):
# Rotate the points around the desired axis
p1 = Point3(points[i][0], points[i][1], 0) * radius
p1 = RotatePoint3(p1, Vec3(0, 0, 1), axis) - origin
p2 = Point3(points[i + 1][0], points[i + 1][1], 0) * radius
p2 = RotatePoint3(p2, Vec3(0, 0, 1), axis) - origin
cross = (p2 - axis).cross(p1 - axis)
cross.normalize()
gvwV.addData3f(p1)
gvwV.addData3f(axis * height - origin)
gvwV.addData3f(p2)
gvwN.addData3f(cross)
gvwN.addData3f(cross)
gvwN.addData3f(cross)
# Base
gvwV.addData3f(p2)
gvwV.addData3f(Point3(0, 0, 0) - origin)
gvwV.addData3f(p1)
gvwN.addData3f(-axis)
gvwN.addData3f(-axis)
gvwN.addData3f(-axis)
geom = Geom(gvd)
for i in range(0, gvwV.getWriteRow(), 3):
# Create and add triangle
geom.addPrimitive(GetGeomTriangle(i, i + 1, i + 2))
# Init the node path, wrapping the box
geomNode = GeomNode("cone")
geomNode.addGeom(geom)
NodePath.__init__(self, geomNode)
def __init__(self, render, camera):
#Since we are using collision detection to do picking, we set it up like any other collision detection system with a traverser and a handler
self.picker = CollisionTraverser() #Make a traverser
self.pq = CollisionHandlerQueue() #Make a handler
#Make a collision node for our picker ray
self.pickerNode = CollisionNode('mouseRay')
#Attach that node to the camera since the ray will need to be positioned relative to it
self.pickerNP = camera.attachNewNode(self.pickerNode)
#Everything to be picked will use bit 1. This way if we were doing other collision we could seperate it
self.pickerNode.setFromCollideMask(BitMask32.bit(1))
self.pickerRay = CollisionRay() #Make our ray
self.pickerNode.addSolid(self.pickerRay) #Add it to the collision node
#Register the ray as something that can cause collisions
self.picker.addCollider(self.pickerNP, self.pq)
#self.picker.showCollisions(render)
self.pst = CollisionTraverser() #Make a traverser
self.hqp = CollisionHandlerQueue() #Make a handler
#Make a collision node for our picker ray
self.pstNode = CollisionNode('mouseRaytoObj')
#Attach that node to the camera since the ray will need to be positioned relative to it
self.pstNode.setFromCollideMask(GeomNode.getDefaultCollideMask())
self.pstNode2 = camera.attachNewNode(self.pstNode)
self.pickerRayObj = CollisionRay()
#Everything to be picked will use bit 1. This way if we were doing other collision we could seperate it
#self.pstNode.setFromCollideMask(BitMask32.bit(1))
self.pstNode.addSolid(self.pickerRayObj) #Add it to the collision node
#Register the ray as something that can cause collisions
self.pst.addCollider(self.pstNode2, self.hqp)
#self.pst.showCollisions(render)
def __init__ (self):
# GeomNode to hold our individual geoms
self.gnode = GeomNode ('wirePrim')
# How many times to subdivide our spheres/cylinders resulting vertices. Keep low
# because this is supposed to be an approximate representation
self.subdiv = 12
def __init__(self,gmap,gaming_zone):
DirectObject.__init__(self)
#gaming zone (used for mouse movement), as a tools.Rectangle
self.gaming_zone=gaming_zone
#actual camera node
self.p3dcam=base.camera
#what the cam is oriented to
self._target=base.render.attachNewNode('GaminCam.target')
#range=[0,1] between min and max closeness to ground
self.level=.7
#
#keys_down acts as a pool containing keys (+mouse buttons) currently down
self.keys_down=[]
update_list.append(self.update)
#setup for mouse picking
picker_node=CollisionNode('gcam_to_mouse_ray')#general collision node
picker_node.setFromCollideMask(GeomNode.getDefaultCollideMask())
self.picker_ray=CollisionRay()#solid ray to attach to coll node
picker_node.addSolid(self.picker_ray)
self.picker_np=self.p3dcam.attachNewNode(picker_node)#attach this node to gcam
self.collision_queue=CollisionHandlerQueue()#stores collisions
self.collision_traverser=CollisionTraverser('gcam_traverser')#actual computer
self.collision_traverser.addCollider(self.picker_np,self.collision_queue)
base.cTrav=self.collision_traverser
self.gmap=gmap
#stack of states (state=pos+zoom)
self.states_stack=[]
#enable the cam to move according to keyboard and mouse
self.move_enabled=True
def createBorderRightCollisionMesh(self):
'''
'''
# Creating the Vertex
self.createVertices(self.track_points, self.street_data.border_r_coll)
# Connect the Vertex
self.connectVertices(self.street_data.border_r_coll)
geom = Geom(self.vdata)
geom.addPrimitive(self.prim)
node = GeomNode('border_r_coll')
node.addGeom(geom)
# nodePath = self.render.attachNewNode(node)
return node
def createUninterpolatedRoadMesh(self):
'''
'''
# Creating the Vertex
self.createVertices(self.track.getPoints(), self.street_data)
# Connect the Vertex
self.connectVertices(self.street_data)
geom = Geom(self.vdata)
geom.addPrimitive(self.prim)
node = GeomNode('street')
node.addGeom(geom)
# nodePath = self.render.attachNewNode(node)
return node
def __init__(self, name, surface, color, wireframe=False):
GeomNode.__init__(self, name)
self._surface = surface
self._color = color
self._wireframe = wireframe
self._init_tables()
self._create_vertex_data()
self._create_geoms()
# set visualisation parameters
if self._wireframe:
self.setAttrib(RenderModeAttrib.make(RenderModeAttrib.MWireframe, 2, 1))
else:
self.setAttrib(RenderModeAttrib.make(RenderModeAttrib.MFilledFlat, 2, 1))
self.setAttrib(CullFaceAttrib.make(CullFaceAttrib.MCullNone))
def init_node_path(self):
if self.node_path:
self.node_path.remove()
vdata = GeomVertexData('name_me', self.format, Geom.UHStatic)
vertex = GeomVertexWriter(vdata, 'vertex')
color = GeomVertexWriter(vdata, 'color')
primitive = GeomTristrips(Geom.UHStatic)
y = self.height * 12 + self.depth * 12 + 1
try:
(slope, rotation) = slope_types[self.slope_type]
except KeyError:
print 'Unknown slope type:', self.slope_type
(slope, rotation) = (flat, 0)
if self.slope_height == 0:
(slope, rotation) = (flat, 0)
scale_y = self.slope_height * 12
vertex.addData3f(*coords_to_panda(-14.0, -slope['sw'] * scale_y, -14.0))
vertex.addData3f(*coords_to_panda(-14.0, -slope['nw'] * scale_y, 14.0))
vertex.addData3f(*coords_to_panda(14.0, -slope['ne'] * scale_y, 14.0))
vertex.addData3f(*coords_to_panda(14.0, -slope['se'] * scale_y, -14.0))
vertex.addData3f(*coords_to_panda(-14.0, -slope['sw'] * scale_y, -14.0))
tile_color = (0.5, 0.5, 1.0)
if self.cant_walk:
tile_color = (1.0, 0.5, 0.5)
if self.cant_cursor:
tile_color = (0.5, 0.0, 0.0)
if (self.x + self.z) % 2 == 0:
tile_color = tuple([x * 0.8 for x in tile_color])
self.tile_color = tile_color
color.addData4f(*tile_color + (1.0,))
color.addData4f(*tile_color + (1.0,))
color.addData4f(*tile_color + (1.0,))
color.addData4f(*tile_color + (1.0,))
color.addData4f(*tile_color + (1.0,))
primitive.addNextVertices(5)
primitive.closePrimitive()
geom = Geom(vdata)
geom.addPrimitive(primitive)
node = GeomNode('gnode')
node.addGeom(geom)
self.node_path = self.parent.node_path.attachNewNode(node)
self.node_path.setH(rotation)
can_stand_height = 0
if not self.cant_cursor:
can_stand_height = 1
self.node_path.setPos(*coords_to_panda(self.x * 28 + 14, -((self.height + self.depth) * 12 + 1 + can_stand_height), self.z * 28 + 14))
self.node_path.setTag('terrain_xyz', '%u,%u,%u' % (self.x, self.y, self.z))
def createCentreMarkOld(self,colour=None):
""" create a line to hint at the pitch of the aircraft on the hud """
if colour is None:
colour = self.colour
# These lines are drawn from scratch rather than using a graphic file
format = GeomVertexFormat.getV3()
vdata = GeomVertexData("vertices",format,Geom.UHStatic)
# create vertices to add to use in creating lines
vertexWriter=GeomVertexWriter(vdata,"vertex")
# essentially I am trying to create a line that gives an idea of
# where the forward vector of the plane is pointing which
# helps indicate the pitch
# the bends in the line could be used to indicate a few angles but
# I am not sure how useful this really is.
vertexWriter.addData3f(0.15,0.0,0.0)
vertexWriter.addData3f(0.10,0.0,0.0)
vertexWriter.addData3f(0.05,0.0,-0.025)
vertexWriter.addData3f(0.00,0.0,0.025)
vertexWriter.addData3f(-0.05,0.0,-0.025)
vertexWriter.addData3f(-0.10,0.0,0.0)
vertexWriter.addData3f(-0.15,0.0,0.0)
# create the primitives
line = GeomLines(Geom.UHStatic)
line.addVertices(0,1)
line.addVertices(1,2)
line.addVertices(2,3)
line.addVertices(3,4)
line.addVertices(4,5)
line.addVertices(5,6)
line.closePrimitive()
# add the lines to a geom object
lineGeom = Geom(vdata)
lineGeom.addPrimitive(line)
# create the node..
lineGN=GeomNode("centremark")
lineGN.addGeom(lineGeom)
# and parent the node to aspect2d
lineNP = aspect2d.attachNewNode(lineGN)
return lineNP
def create_line(x1, z1, x2, z2):
format = GeomVertexFormat.getV3n3c4t2()
vdata = GeomVertexData('', format, Geom.UHStatic)
vertex = GeomVertexWriter(vdata, 'vertex')
normal = GeomVertexWriter(vdata, 'normal')
vertex.addData3f(x1, 0, z1)
vertex.addData3f(x2, 0, z2)
for _i in range(2):
normal.addData3f(0, - 1, 0)
prim_hint = Geom.UHStatic
prim = GeomLines(prim_hint)
prim.addVertices(0, 1)
prim.closePrimitive()
geom = Geom(vdata)
geom.addPrimitive(prim)
node = GeomNode('')
node.addGeom(geom)
return (node, vdata)
def init_node_path(self):
if self.node_path:
self.node_path.remove()
node = GeomNode('gnode')
self.node_path = self.parent.node_path_terrain.attachNewNode(node)
for level in self.tiles:
for row in level:
for tile in row:
tile.init_node_path()
def create_line(x1, z1, x2, z2):
format = GeomVertexFormat.getV3n3c4t2()
vdata = GeomVertexData('', format, Geom.UHStatic)
vertex = GeomVertexWriter(vdata, 'vertex')
normal = GeomVertexWriter(vdata, 'normal')
vertex.addData3f(x1, 0, z1)
vertex.addData3f(x2, 0, z2)
for _i in range(2):
normal.addData3f(0, - 1, 0)
prim_hint = Geom.UHStatic
prim = GeomLines(prim_hint)
prim.addVertices(0, 1)
prim.closePrimitive()
geom = Geom(vdata)
geom.addPrimitive(prim)
node = GeomNode('')
node.addGeom(geom)
return (node, vdata)
def init_node_path(self):
if self.node_path:
self.node_path.remove()
vdata = GeomVertexData('name_me', self.format, Geom.UHStatic)
vertex = GeomVertexWriter(vdata, 'vertex')
color = GeomVertexWriter(vdata, 'color')
primitive = GeomTristrips(Geom.UHStatic)
vertex.addData3f(-2.0, -2.0, -2.0)
vertex.addData3f(2.0, -2.0, -2.0)
vertex.addData3f(0, 2.0, -2.0)
vertex.addData3f(0, 0, 2.0)
vertex.addData3f(-2.0, -2.0, -2.0)
vertex.addData3f(0, 0, 2.0)
vertex.addData3f(2.0, -2.0, -2.0)
vertex.addData3f(0, 0, 2.0)
vertex.addData3f(0, 2.0, -2.0)
color_tuple = (1.0, 1.0, 1.0)
if self.point == 'A':
color_tuple = (1.0, 0.0, 0.0)
elif self.point == 'B':
color_tuple = (0.0, 1.0, 0.0)
elif self.point == 'C':
color_tuple = (0.0, 0.0, 1.0)
elif self.point == 'D':
color_tuple = (1.0, 1.0, 0.0)
color.addData4f(*color_tuple + (1.0,))
color.addData4f(*color_tuple + (1.0,))
color.addData4f(*color_tuple + (1.0,))
color.addData4f(*color_tuple + (1.0,))
color.addData4f(*color_tuple + (1.0,))
color.addData4f(*color_tuple + (1.0,))
color.addData4f(*color_tuple + (1.0,))
color.addData4f(*color_tuple + (1.0,))
color.addData4f(*color_tuple + (1.0,))
primitive.addNextVertices(9)
primitive.closePrimitive()
geom = Geom(vdata)
geom.addPrimitive(primitive)
node = GeomNode('gnode')
node.addGeom(geom)
self.node_path = self.parent.parent.node_path_ui.attachNewNode(node)
self.node_path.setP(180)
self.node_path.setPos(*coords_to_panda(*self.coords))
def init_collide(self):
from pandac.PandaModules import CollisionTraverser, CollisionNode
from pandac.PandaModules import CollisionHandlerQueue, CollisionRay
self.cTrav = CollisionTraverser('MousePointer')
self.cQueue = CollisionHandlerQueue()
self.cNode = CollisionNode('MousePointer')
self.cNodePath = base.camera.attachNewNode(self.cNode)
self.cNode.setFromCollideMask(GeomNode.getDefaultCollideMask())
self.cRay = CollisionRay()
self.cNode.addSolid(self.cRay)
self.cTrav.addCollider(self.cNodePath, self.cQueue)
def __init__(self, name, width, height, points, normals=[], color=(1.0,1.0,1.0,1.0), wireframe=False):
GeomNode.__init__(self, name)
self._width = width
self._height = height
assert(len(points) == self._width * self._height)
if normals:
assert(len(normals) == self._width * self._height)
self._points = points
self._normals = normals
self._color = color
self._wireframe = wireframe
self._create_vertex_data()
self._create_geom_primitives()
self._create_geoms()
# set visualisation parameters
if self._wireframe:
self.setAttrib(RenderModeAttrib.make(RenderModeAttrib.MWireframe, 2, 1))
self.setAttrib(CullFaceAttrib.make(CullFaceAttrib.MCullNone))
def init_node_path(self):
if self.node_path:
self.node_path.remove()
vdata = GeomVertexData('name_me', self.format, Geom.UHStatic)
vertex = GeomVertexWriter(vdata, 'vertex')
color = GeomVertexWriter(vdata, 'color')
primitive = GeomLines(Geom.UHStatic)
vertex.addData3f(*coords_to_panda(*self.vector))
vertex.addData3f(*coords_to_panda(*[-x for x in self.vector]))
color.addData4f((1.0, 0.0, 0.0, 1.0,))
color.addData4f((0.0, 0.0, 1.0, 1.0,))
primitive.addNextVertices(2)
primitive.closePrimitive()
geom = Geom(vdata)
geom.addPrimitive(primitive)
node = GeomNode('gnode')
node.addGeom(geom)
self.node_path = self.parent.parent.node_path_ui.attachNewNode(node)
self.node_path.setScale(20)
self.node_path.setPos(*coords_to_panda(*self.coords))
def collideWithGeom(self):
# The into collide mask is the bit pattern colliders look at
# when deciding whether or not to test for a collision "into"
# this collision solid. Set to all Off so this collision solid
# will not be considered in any collision tests
self.collisionNode.setIntoCollideMask(BitMask32().allOff())
# The from collide mask is the bit pattern *this* collision solid
# compares against the into collide mask of candidate collision solids
# Turn this mask all off since we're not testing for collisions against
# collision solids, but we do want to test against geometry
self.collisionNode.setFromCollideMask(GeomNode.getDefaultCollideMask())
def create_ray(self, object, entity, name, show = False, x = 0, y = 0, z = 0,
dx = 0, dy = 0, dz = -1):
# create queue
object.queue = CollisionHandlerQueue()
# create ray
object.rayNP = entity.attachNewNode(CollisionNode(name))
object.ray = CollisionRay(x, y, 1, dx, dy, dz)
object.rayNP.node().addSolid(object.ray)
object.rayNP.node().setFromCollideMask(GeomNode.getDefaultCollideMask())
base.cTrav.addCollider(object.rayNP, object.queue)
if show:
object.rayNP.show()
def stripAttribs(geom, cls):
for np in geom.findAllMatches("**/+GeomNode"):
node = np.node()
for i in range(node.getNumGeoms()):
gs = node.getGeomState(i)
node.setGeomState(i, gs.removeAttrib(cls.getClassType()))
if geom.node().getClassType() == GeomNode.getClassType():
node = geom.node()
for i in range(node.getNumGeoms()):
gs = node.getGeomState(i)
node.setGeomState(i, gs.removeAttrib(cls.getClassType()))
def stripAttribs(geom, cls):
for np in geom.findAllMatches('**/+GeomNode'):
node = np.node()
for i in range(node.getNumGeoms()):
gs = node.getGeomState(i)
node.setGeomState(i, gs.removeAttrib(cls.getClassType()))
if geom.node().getClassType() == GeomNode.getClassType():
node = geom.node()
for i in range(node.getNumGeoms()):
gs = node.getGeomState(i)
node.setGeomState(i, gs.removeAttrib(cls.getClassType()))
def init_collide(self):
# why the heck he import within method
from pandac.PandaModules import CollisionTraverser, CollisionNode
from pandac.PandaModules import CollisionHandlerQueue, CollisionRay
# init and import collision for object
self.cTrav = CollisionTraverser('MousePointer')
self.cQueue = CollisionHandlerQueue()
self.cNode = CollisionNode('MousePointer')
self.cNodePath = base.camera.attachNewNode(self.cNode)
self.cNode.setFromCollideMask(GeomNode.getDefaultCollideMask())
self.cRay = CollisionRay()
self.cNode.addSolid(self.cRay)
self.cTrav.addCollider(self.cNodePath, self.cQueue)
def createRay(
self, obj, ent, name, show=False, x=0, y=0, z=0, dx=0, dy=0, dz=-1
):
#create queue
obj.queue = CollisionHandlerQueue()
#create ray
obj.rayNP = ent.attachNewNode(CollisionNode(name))
obj.ray = CollisionRay(x, y, z, dx, dy, dz)
obj.rayNP.node().addSolid(obj.ray)
obj.rayNP.node().setFromCollideMask(GeomNode.getDefaultCollideMask())
sandbox.pickTrav.addCollider(obj.rayNP, obj.queue)
if show:
obj.rayNP.show()
def generate(self):
format = GeomVertexFormat.getV3()
data = GeomVertexData("Data", format, Geom.UHStatic)
vertices = GeomVertexWriter(data, "vertex")
size = self.size
vertices.addData3f(-size, -size, -size)
vertices.addData3f(+size, -size, -size)
vertices.addData3f(-size, +size, -size)
vertices.addData3f(+size, +size, -size)
vertices.addData3f(-size, -size, +size)
vertices.addData3f(+size, -size, +size)
vertices.addData3f(-size, +size, +size)
vertices.addData3f(+size, +size, +size)
triangles = GeomTriangles(Geom.UHStatic)
def addQuad(v0, v1, v2, v3):
triangles.addVertices(v0, v1, v2)
triangles.addVertices(v0, v2, v3)
triangles.closePrimitive()
addQuad(4, 5, 7, 6) # Z+
addQuad(0, 2, 3, 1) # Z-
addQuad(3, 7, 5, 1) # X+
addQuad(4, 6, 2, 0) # X-
addQuad(2, 6, 7, 3) # Y+
addQuad(0, 1, 5, 4) # Y+
geom = Geom(data)
geom.addPrimitive(triangles)
node = GeomNode("CubeMaker")
node.addGeom(geom)
path = NodePath(node)
path.setColor(1.0, 0.0, 1.0)
return NodePath(node)
def draw(self):
format = GeomVertexFormat.getV3n3cpt2()
vdata = GeomVertexData('square', format, Geom.UHDynamic)
vertex = GeomVertexWriter(vdata, 'vertex')
normal = GeomVertexWriter(vdata, 'normal')
color = GeomVertexWriter(vdata, 'color')
circle = Geom(vdata)
# Create vertices
vertex.addData3f(self.pos)
color.addData4f(self.color)
for v in range(self._EDGES):
x = self.pos.getX() + (self.size * math.cos(
(2 * math.pi / self._EDGES) * v))
y = self.pos.getY() + (self.size * math.sin(
(2 * math.pi / self._EDGES) * v))
z = self.pos.getZ()
vertex.addData3f(x, y, z)
color.addData4f(self.color)
# Create triangles
for t in range(self._EDGES):
tri = GeomTriangles(Geom.UHDynamic)
tri.addVertex(0)
tri.addVertex(t + 1)
if (t + 2) > self._EDGES:
tri.addVertex(1)
else:
tri.addVertex(t + 2)
tri.closePrimitive()
circle.addPrimitive(tri)
gn = GeomNode('Circle')
gn.addGeom(circle)
np = NodePath(gn)
np.setHpr(0, 90, 0)
return np
def __init__(self):
''' Should the traverser be shared? '''
LOG.debug("[Selector] Initializing")
# The collision traverser does the checking of solids for collisions
self.cTrav = CollisionTraverser()
# The collision handler queue is a simple handler that records all
# detected collisions during traversal
self.cHandler = CollisionHandlerQueue()
self.pickerNode = CollisionNode('mouseRay')
self.pickerNP = camera.attachNewNode(self.pickerNode)
self.pickerNode.setFromCollideMask(GeomNode.getDefaultCollideMask())
self.pickerRay = CollisionRay()
self.pickerNode.addSolid(self.pickerRay)
self.cTrav.addCollider(self.pickerNP, self.cHandler)
# Start listening to clicks
self.resume()
def init_ui(self):
self.cTrav = CollisionTraverser('ui_collision_traverser')
self.collision_handler = CollisionHandlerQueue()
picker_node = CollisionNode('mouse_click_ray')
self.picker_node_path = self.camera.attachNewNode(picker_node)
picker_node.setFromCollideMask(GeomNode.getDefaultCollideMask())
self.picker_ray = CollisionRay()
picker_node.addSolid(self.picker_ray)
self.cTrav.addCollider(self.picker_node_path, self.collision_handler)
'''
#debug: make a visible line segment
from pandac.PandaModules import LineSegs, LVecBase4f, NodePath
seg_drawer = LineSegs()
seg_drawer.setColor(LVecBase4f(1, 0, 0, 1)) #red
seg_drawer.moveTo(0,0,0)
seg_drawer.drawTo(0,100,0)
NodePath(seg_drawer.create()).reparentTo(self.picker_node_path)
'''
self.accept('a', self.mouse_ray)
def __init__(self):
''' Should the traverser be shared? '''
LOG.debug("[Selector] Initializing")
# The collision traverser does the checking of solids for collisions
self.cTrav = CollisionTraverser()
# The collision handler queue is a simple handler that records all
# detected collisions during traversal
self.cHandler = CollisionHandlerQueue()
self.pickerNode = CollisionNode('mouseRay')
self.pickerNP = camera.attachNewNode(self.pickerNode)
self.pickerNode.setFromCollideMask(GeomNode.getDefaultCollideMask())
self.pickerRay = CollisionRay()
self.pickerNode.addSolid(self.pickerRay)
self.cTrav.addCollider(self.pickerNP, self.cHandler)
# Start listening to clicks
self.resume()
def createRay(self,
obj,
ent,
name,
show=False,
x=0,
y=0,
z=0,
dx=0,
dy=0,
dz=-1):
#create queue
obj.queue = CollisionHandlerQueue()
#create ray
obj.rayNP = ent.attachNewNode(CollisionNode(name))
obj.ray = CollisionRay(x, y, z, dx, dy, dz)
obj.rayNP.node().addSolid(obj.ray)
obj.rayNP.node().setFromCollideMask(GeomNode.getDefaultCollideMask())
sandbox.pickTrav.addCollider(obj.rayNP, obj.queue)
if show:
obj.rayNP.show()
def __init__(self, blocks, mapInfo):
self.destroyedBlocks = []
self.addedBlocks = []
self.hasChanged = 0
self.node = GeomNode('gnode')
self.chunks = []
self.collisionGeom = 0
self.blocks = blocks
self.mapInfo = mapInfo
self.xmax = self.mapInfo.GetSize()[0]
self.ymax = self.mapInfo.GetSize()[1]
self.zmax = self.mapInfo.GetSize()[2]
self.InitializeChunks()
terrain = render.attachNewNode(self.node)
#terrain.flattenStrong()
#terrain.setRenderModeWireframe()
terrain.analyze()
if(not Settings.IS_SERVER):
self.SetupLights()
from pandac.PandaModules import CollisionRay
from pandac.PandaModules import CollisionHandlerQueue
from pandac.PandaModules import CollisionTraverser
from pandac.PandaModules import GeomNode
from pandac.PandaModules import LineSegs
from pandac.PandaModules import NodePath
from pandac.PandaModules import Point3
from pandac.PandaModules import Vec3
import math
from math import sqrt
wallRayNP = render.attachNewNode(CollisionNode("wall ray collision node"))
wallRayNP.node().addSolid(CollisionRay(0,0,0,0,1,0))
wallRayNP.node().setIntoCollideMask(BitMask32.allOff())
wallRayNP.node().setFromCollideMask(BitMask32.allOn() & ~GeomNode.getDefaultCollideMask())
wallRayNP.node().setFromCollideMask(wallRayNP.node().getFromCollideMask() & ~BitMask32.bit(1))
#wallRayNP.show()
collisionHandler = CollisionHandlerQueue()
collisionTraverser = CollisionTraverser("pathfinder's collisionTraverser")
collisionTraverser.addCollider(wallRayNP, collisionHandler)
collisionTraverser.setRespectPrevTransform(True)
class PathFinder():
## def __init__(self, position, ID = -1):
## NodePath.__init__(self, "Waypoint")
## self.position = position
## self.texture = loader.loadTexture("textures/blue.jpg")
## self.costToThisNode = 0
def visualize(self,
parentNodePath,
highlightVerts=[],
pathVerts=[],
visitedVerts=[]):
'''
XXX Should move this into a product-specific class.
'''
gFormat = GeomVertexFormat.getV3cp()
self.visVertexData = GeomVertexData("OMGVERTEXDATA2", gFormat,
Geom.UHDynamic)
self.visVertexWriter = GeomVertexWriter(self.visVertexData, "vertex")
self.visVertexColorWriter = GeomVertexWriter(self.visVertexData,
"color")
vertToWriterIndex = {}
currIndex = 0
for v in self.vertexCoords.keys():
vertToWriterIndex[v] = currIndex
x = self.vertexCoords[v][0]
y = self.vertexCoords[v][1]
z = self.vertexCoords[v][2]
self.visVertexWriter.addData3f(x, y, z + 0.5)
if v in highlightVerts:
self.visVertexColorWriter.addData4f(1.0, 0.0, 0.0, 1.0)
elif v in visitedVerts:
self.visVertexColorWriter.addData4f(0.0, 0.0, 1.0, 1.0)
else:
self.visVertexColorWriter.addData4f(1.0, 1.0, 0.0, 1.0)
currIndex += 1
pathOffsetIntoIndex = currIndex
for v in pathVerts:
self.visVertexWriter.addData3f(v[0], v[1], v[2] + 0.5)
self.visVertexColorWriter.addData4f(0.0, 1.0, 0.0, 1.0)
currIndex += 1
lines = GeomLinestrips(Geom.UHStatic)
for p in self.polyToVerts.keys():
for v in self.polyToVerts[p]:
lines.addVertex(vertToWriterIndex[v])
lines.addVertex(vertToWriterIndex[self.polyToVerts[p][0]])
lines.closePrimitive()
if len(pathVerts) > 0:
for i in xrange(len(pathVerts)):
lines.addVertex(pathOffsetIntoIndex + i)
lines.closePrimitive()
self.visGeom = Geom(self.visVertexData)
self.visGeom.addPrimitive(lines)
self.visGN = GeomNode("NavMeshVis")
self.visGN.addGeom(self.visGeom)
self.visNodePath = parentNodePath.attachNewNode(self.visGN)
self.visNodePath.setTwoSided(True)
class NavMesh(object):
notify = directNotify.newCategory("NavMesh")
def __init__(self, filepath=None, filename=None):
if filename is not None:
self._initFromFilename(filepath, filename)
def initFromPolyData(self, polyToVerts, vertToPolys, polyToAngles,
vertexCoords, environmentHash):
'''
Initialize the mesh from a set of polygons.
polyToVerts: Dictionary mapping a polygon ID to a set of N vertex IDs
vertToPolys: Dictionary mapping a vertex ID to a set of poly IDs (of every poly that includes it)
polyToAngles: Dictionary mapping a polygon ID to a set of N angles (in vertex order)
vertexCoords: Dictionary mapping a vertex ID to the coordinates of the vertex in worldspace
environmentHash: Hash value derived from the same collision geometry as the other arguments. See AreaMapper.getEnvironmentHash().
'''
self.polyToVerts = polyToVerts
self.vertToPolys = vertToPolys
self.polyToAngles = polyToAngles
self.vertexCoords = vertexCoords
self.environmentHash = environmentHash
self.connectionLookup = {}
self.connections = []
self._discoverInitialConnectivity()
self.optimizeMesh()
def visualize(self,
parentNodePath,
highlightVerts=[],
pathVerts=[],
visitedVerts=[]):
'''
XXX Should move this into a product-specific class.
'''
gFormat = GeomVertexFormat.getV3cp()
self.visVertexData = GeomVertexData("OMGVERTEXDATA2", gFormat,
Geom.UHDynamic)
self.visVertexWriter = GeomVertexWriter(self.visVertexData, "vertex")
self.visVertexColorWriter = GeomVertexWriter(self.visVertexData,
"color")
vertToWriterIndex = {}
currIndex = 0
for v in self.vertexCoords.keys():
vertToWriterIndex[v] = currIndex
x = self.vertexCoords[v][0]
y = self.vertexCoords[v][1]
z = self.vertexCoords[v][2]
self.visVertexWriter.addData3f(x, y, z + 0.5)
if v in highlightVerts:
self.visVertexColorWriter.addData4f(1.0, 0.0, 0.0, 1.0)
elif v in visitedVerts:
self.visVertexColorWriter.addData4f(0.0, 0.0, 1.0, 1.0)
else:
self.visVertexColorWriter.addData4f(1.0, 1.0, 0.0, 1.0)
currIndex += 1
pathOffsetIntoIndex = currIndex
for v in pathVerts:
self.visVertexWriter.addData3f(v[0], v[1], v[2] + 0.5)
self.visVertexColorWriter.addData4f(0.0, 1.0, 0.0, 1.0)
currIndex += 1
lines = GeomLinestrips(Geom.UHStatic)
for p in self.polyToVerts.keys():
for v in self.polyToVerts[p]:
lines.addVertex(vertToWriterIndex[v])
lines.addVertex(vertToWriterIndex[self.polyToVerts[p][0]])
lines.closePrimitive()
if len(pathVerts) > 0:
for i in xrange(len(pathVerts)):
lines.addVertex(pathOffsetIntoIndex + i)
lines.closePrimitive()
self.visGeom = Geom(self.visVertexData)
self.visGeom.addPrimitive(lines)
self.visGN = GeomNode("NavMeshVis")
self.visGN.addGeom(self.visGeom)
self.visNodePath = parentNodePath.attachNewNode(self.visGN)
self.visNodePath.setTwoSided(True)
def _discoverInitialConnectivity(self):
print "Building initial connectivity graph..."
for pId in self.polyToVerts.keys():
verts = self.polyToVerts[pId]
numVerts = len(verts)
candidates = []
neighborPolys = []
for v in verts:
candidates += [
p for p in self.vertToPolys[v]
if (p not in candidates) and (p != pId)
]
for vNum in xrange(numVerts):
neighbor = [p for p in candidates if ((verts[vNum] in self.polyToVerts[p]) and \
(verts[(vNum+1)%numVerts] in self.polyToVerts[p]))]
if len(neighbor) == 0:
neighborPolys.append(None)
elif len(neighbor) == 1:
neighborPolys.append(neighbor[0])
else:
raise "Two neighbors found for the same edge?!?!"
self.connectionLookup[pId] = neighborPolys
# --------- Begin stitching code ---------
def _attemptToMergePolys(self, polyA, polyB):
newVerts = []
newAngles = []
newConnections = []
vertsA = self.polyToVerts[polyA]
vertsB = self.polyToVerts[polyB]
lenA = len(vertsA)
lenB = len(vertsB)
anglesA = self.polyToAngles[polyA]
anglesB = self.polyToAngles[polyB]
sharedVerts = [v for v in vertsA if (v in vertsB)]
locA = 0
while vertsA[locA] not in sharedVerts:
locA += 1
while vertsA[locA] in sharedVerts:
locA = (locA - 1) % lenA
locA = (locA + 1) % lenA
CCWmost = vertsA[locA]
CCWmostLocA = locA
while vertsA[locA] in sharedVerts:
locA = (locA + 1) % lenA
locA = (locA - 1) % lenA
CWmost = vertsA[locA]
CWmostLocA = locA
# Convexity Check.
# Verify that removing the edge preserves convexity and bail out if not.
locA = 0
locB = 0
while vertsA[locA] != CCWmost:
locA += 1
while vertsB[locB] != CCWmost:
locB += 1
CCWmostAngleSum = anglesA[locA] + anglesB[locB]
CCWmostLocB = locB
if CCWmostAngleSum > 180:
return False
locA = 0
locB = 0
while vertsA[locA] != CWmost:
locA += 1
while vertsB[locB] != CWmost:
locB += 1
CWmostAngleSum = anglesA[locA] + anglesB[locB]
if CWmostAngleSum > 180:
return False
# We've found the CW-most vert of the shared edge.
# Now walk A clockwise until we hit the CCW-most vert of the shared edge.
newVerts.append(CWmost)
newAngles.append(CWmostAngleSum)
newConnections.append(self.connectionLookup[polyA][locA])
locA = (locA + 1) % lenA
while vertsA[locA] != CCWmost:
newVerts.append(vertsA[locA])
newAngles.append(anglesA[locA])
newConnections.append(self.connectionLookup[polyA][locA])
locA = (locA + 1) % lenA
# Now we've hit the CCW-most vert of the shared edge.
# Walk B clockwise until we get back to the CW-most vert of the shared edge.
locB = CCWmostLocB
newVerts.append(CCWmost)
newAngles.append(CCWmostAngleSum)
neighbor = self.connectionLookup[polyB][locB]
newConnections.append(neighbor)
if neighbor is not None:
for i in xrange(len(self.connectionLookup[neighbor])):
if self.connectionLookup[neighbor][i] == polyB:
self.connectionLookup[neighbor][i] = polyA
locB = (locB + 1) % lenB
while vertsB[locB] != CWmost:
newVerts.append(vertsB[locB])
newAngles.append(anglesB[locB])
neighbor = self.connectionLookup[polyB][locB]
newConnections.append(neighbor)
if neighbor is not None:
for i in xrange(len(self.connectionLookup[neighbor])):
if self.connectionLookup[neighbor][i] == polyB:
self.connectionLookup[neighbor][i] = polyA
locB = (locB + 1) % lenB
# We've added every vertex, its proper angle, and connectivity info
# to the new polygon. Now replace A with the new guy and remove B.
self.polyToVerts[polyA] = newVerts
self.polyToAngles[polyA] = newAngles
self.connectionLookup[polyA] = newConnections
# Make sure we have vertex->poly pointers for all the new verts we added to A.
for v in newVerts:
if polyA not in self.vertToPolys[v]:
self.vertToPolys[v].append(polyA)
# Clean up all of B's old vertices.
for v in vertsB:
self.vertToPolys[v].remove(polyB)
if len(self.vertToPolys[v]) == 0:
# No one's using this vertex anymore, remove it
del self.vertToPolys[v]
del self.vertexCoords[v]
del self.polyToVerts[polyB]
del self.polyToAngles[polyB]
del self.connectionLookup[polyB]
return True
def _attemptToGrowPoly(self, pId):
for neighbor in self.connectionLookup.get(pId, []):
if (neighbor is not None) and self._attemptToMergePolys(
pId, neighbor):
return True
return False
def _growEachPolyOnce(self):
grewAtLeastOne = False
for pId in self.connectionLookup.keys():
if self._attemptToGrowPoly(pId):
grewAtLeastOne = True
return grewAtLeastOne
def optimizeMesh(self):
'''
Takes a mesh that is already functionally complete and optimizes it for better performance.
Reduces poly count and cuts out redundant vertices.
Also compacts the polygon IDs into a contiguous range from 0 to N.
No need to do the same for vertex IDs yet.
'''
'''print "Stitching polygons: %s -> " % (len(self.polyToVerts)),
orig = len(self.polyToVerts)
numPasses = 1
while self._growEachPolyOnce():
print "%s -> " % (len(self.polyToVerts)),
numPasses += 1
print "Done!\nPoly count reduced to %0.1f%% of original." % (len(self.polyToVerts)/float(orig)*100.0)'''
self._pruneExtraVerts()
self._compactPolyIds()
self.numNodes = len(self.connections)
biggest = 0
biggestPoly = -1
for p in self.polyToVerts:
if len(self.polyToVerts[p]) > biggest:
biggest = len(self.polyToVerts[p])
biggestPoly = p
print "Most verts in a single poly: ", biggest
assert biggest < 256
def _cleanPoly(self, polyId):
verts = self.polyToVerts[polyId]
angles = self.polyToAngles[polyId]
neighbors = self.connectionLookup[polyId]
numVerts = len(verts)
newVerts = []
newAngles = []
newNeighbors = []
for i in xrange(numVerts):
if (angles[i] != 180) or \
(len(self.vertToPolys.get(verts[i],[])) > 2) or \
(neighbors[i] != neighbors[(i-1)%numVerts]):
# Keep vertex
newVerts.append(verts[i])
newAngles.append(angles[i])
newNeighbors.append(neighbors[i])
else:
# Remove vertex, this will happen twice so pop it
self.vertToPolys.pop(verts[i], None)
self.vertexCoords.pop(verts[i], None)
if len(verts) != len(newVerts):
self.polyToVerts[polyId] = newVerts
self.polyToAngles[polyId] = newAngles
self.connectionLookup[polyId] = newNeighbors
assert len(newVerts) < 256
def _pruneExtraVerts(self):
print "Pruning extra vertices..."
print "Starting verts: %s" % len(self.vertToPolys)
for polyId in self.connectionLookup.keys():
self._cleanPoly(polyId)
print "Ending verts: %s" % len(self.vertToPolys)
def _compactPolyIds(self):
polyList = self.polyToVerts.keys()
polyList.sort()
oldToNewId = {None: None}
newPolyToVerts = {}
newPolyToAngles = {}
self.connections = []
currId = 0
for oldId in polyList:
oldToNewId[oldId] = currId
self.connections.append([])
currId += 1
for oldId in polyList:
newPolyToVerts[oldToNewId[oldId]] = self.polyToVerts[oldId]
newPolyToAngles[oldToNewId[oldId]] = self.polyToAngles[oldId]
#self.connections[oldToNewId[oldId]] = []
for edgeNum in xrange(len(self.connectionLookup[oldId])):
self.connections[oldToNewId[oldId]].append(
oldToNewId[self.connectionLookup[oldId][edgeNum]])
self.polyToVerts = newPolyToVerts
self.polyToAngles = newPolyToAngles
del self.connectionLookup
# --------- Begin pathfinding code ---------
def _findCentroid(self, polyId):
verts = self.polyToVerts[polyId]
numVerts = len(verts)
x = 0
y = 0
z = 0
for v in verts:
x += self.vertexCoords[v][0]
y += self.vertexCoords[v][1]
z += self.vertexCoords[v][2]
x /= numVerts
y /= numVerts
z /= numVerts
return (x, y, z)
## def _estimateDistanceBetweenPolys(self, polyA, polyB):
## centroidA = self._findCentroid(polyA)
## centroidB = self._findCentroid(polyB)
## dx = centroidA[0] - centroidB[0]
## dy = centroidA[1] - centroidB[1]
## dz = centroidA[2] - centroidB[2]
## return math.sqrt(dx*dx + dy*dy + dz*dz)
def _walkToNeighbor(self, currPoly, neighborPoly):
currVerts = self.polyToVerts[currPoly]
neighborVerts = self.polyToVerts[neighborPoly]
lenCurr = len(currVerts)
sharedVerts = [v for v in currVerts if (v in neighborVerts)]
loc = 0
while currVerts[loc] not in sharedVerts:
loc += 1
while currVerts[loc] in sharedVerts:
loc = (loc - 1) % lenCurr
loc = (loc + 1) % lenCurr
CCWmost = currVerts[loc]
CCWmostLoc = loc
while currVerts[loc] in sharedVerts:
loc = (loc + 1) % lenCurr
loc = (loc - 1) % lenCurr
CWmost = currVerts[loc]
CCWmostCoords = self.vertexCoords[CCWmost]
CWmostCoords = self.vertexCoords[CWmost]
# For now, walk to the midpoint of the connecting edge
departingEdge = CCWmostLoc # Don't need this with goal->start search
neighborsEdge = 0
while self.connections[neighborPoly][neighborsEdge] != currPoly:
neighborsEdge += 1
return (neighborsEdge, ((CWmostCoords[0] + CCWmostCoords[0]) / 2.0,
(CWmostCoords[1] + CCWmostCoords[1]) / 2.0,
(CWmostCoords[2] + CCWmostCoords[2]) / 2.0))
## def _remakePath(self,walkBack,currNode):
## if currNode in walkBack:
## p = self._remakePath(walkBack,walkBack[currNode])
## return p + [currNode,]
## return [currNode,]
## def findRoute(self, startNode, goalNode):
## '''
## So much love for A*.
## '''
## nodeToF = {}
## nodeToG = {}
## nodeToH = {}
## walkBack = {}
## #nodeToEntryPoint = {}
## self.nodeToEntryPoint[startNode] = self._findCentroid(startNode)
## nodeToG[startNode] = 0
## nodeToH[startNode] = self._estimateDistanceBetweenPolys(startNode,goalNode)
## nodeToF[startNode] = nodeToG[startNode] + nodeToH[startNode]
## closedSet = {}
## openSet = {}
## openQueue = PriQueue() # Priority = F score
## openSet[startNode] = 1
## openQueue.push((nodeToF[startNode],startNode))
## goalPoint = self._findCentroid(goalNode)
## while len(openSet) > 0:
## f,currNode = openQueue.pop(0)
## del openSet[currNode]
## self.aStarWasHere[currNode] = 1
## if currNode == goalNode:
## return self._remakePath(walkBack,currNode)
## closedSet[currNode] = 1
## currPoint = self.nodeToEntryPoint[currNode]
## for neighbor in self.connections[currNode]:
## if (neighbor is not None) and (neighbor not in closedSet):
## departingEdge,newEntryPoint = self._walkToNeighbor(currNode,currPoint,neighbor)
## newG = nodeToG[currNode] + math.sqrt((newEntryPoint[0] - currPoint[0])**2 + \
## (newEntryPoint[1] - currPoint[1])**2 + \
## (newEntryPoint[2] - currPoint[2])**2)
## gotHereFasterThanBefore = False
## if neighbor not in openSet:
## openSet[neighbor] = 1
## gotHereFasterThanBefore = True
## elif newG < nodeToG[neighbor]:
## openQueue.remove((nodeToF[neighbor],neighbor))
## gotHereFasterThanBefore = True
## if gotHereFasterThanBefore:
## walkBack[neighbor] = currNode
## self.nodeToEntryPoint[neighbor] = newEntryPoint
## nodeToH[neighbor] = math.sqrt((goalPoint[0] - newEntryPoint[0])**2 + \
## (goalPoint[1] - newEntryPoint[1])**2 + \
## (goalPoint[2] - newEntryPoint[2])**2)
## nodeToG[neighbor] = newG
## nodeToF[neighbor] = nodeToG[neighbor] + nodeToH[neighbor]
## openQueue.push((nodeToF[neighbor],neighbor))
## raise "No path found! D:"
def _findAllRoutesToGoal(self, goalNode):
'''
Find the shortest path from ALL start nodes to the given goal node. (Djikstra)
After running, self.pathData[startNode][goalNode] == outgoing edge from startNode to the next node
for the given value of goalNode and ALL values of startNode.
'''
nodeToG = {}
walkBack = {}
nodeDeparturePoint = {}
nodeDeparturePoint[goalNode] = self._findCentroid(goalNode)
nodeToG[goalNode] = 0
closedSet = {}
openSet = {}
openQueue = PriQueue()
openSet[goalNode] = 1
openQueue.push((nodeToG[goalNode], goalNode))
walkBack[goalNode] = (0, goalNode)
while len(openSet) > 0:
f, currNode = openQueue.pop(0)
del openSet[currNode]
closedSet[currNode] = 1
currPoint = nodeDeparturePoint[currNode]
for neighbor in self.connections[currNode]:
if (neighbor is not None) and (neighbor not in closedSet):
neighborsEdge, newPoint = self._walkToNeighbor(
currNode, neighbor)
newG = nodeToG[currNode] + math.sqrt((newPoint[0] - currPoint[0])**2 + \
(newPoint[1] - currPoint[1])**2 + \
(newPoint[2] - currPoint[2])**2)
gotHereFasterThanBefore = False
if neighbor not in openSet:
openSet[neighbor] = 1
gotHereFasterThanBefore = True
elif newG < nodeToG[neighbor]:
openQueue.remove((nodeToG[neighbor], neighbor))
gotHereFasterThanBefore = True
if gotHereFasterThanBefore:
walkBack[neighbor] = (neighborsEdge, currNode)
nodeDeparturePoint[neighbor] = newPoint
nodeToG[neighbor] = newG
openQueue.push((nodeToG[neighbor], neighbor))
for startNode in xrange(len(self.connections)):
departingEdge = walkBack[startNode][0]
assert self.pathData[startNode][goalNode] is None
self.pathData[startNode][goalNode] = departingEdge
def generatePathData(self, rowRange=None):
'''
Entry point for path preprocessing.
Solves all pairs shortest path for this mesh.
Stores the result in self.pathData.
SLOW. Expect 8-10 minutes on Port Royal alone.
Currently runs Djikstra on every possible start node.
There are faster approaches for APSP, but...
'''
if rowRange is None:
rowRange = (0, self.numNodes)
self.initPathData()
for goalNode in xrange(rowRange[0], rowRange[1]):
self._findAllRoutesToGoal(goalNode)
def createPathTable(self):
'''
Takes a 2D array self.pathData and changes it in place.
Each row is changed into a run-length encoded string.
Then, feeds the data into a new PathTable instance.
'''
for row in self.pathData:
for val in row:
if val == None:
raise "Incomplete path data!"
shortestPathLookup = self.pathData
self.pathData = []
# Run-Length Encode the whole thing!
for start in xrange(self.numNodes):
row = []
lastVal = None
nodesInRow = 0
for goal in xrange(self.numNodes):
val = shortestPathLookup[start][goal]
if val != lastVal:
row.append([goal, val])
lastVal = val
nodesInRow += 1
else:
nodesInRow += 1
assert nodesInRow == self.numNodes
stringsRow = []
# Convert row to a bytestring to save space
for item in row:
assert item[0] < 65536
assert item[1] < 256
stringsRow.append(
chr(item[0] / 256) + chr(item[0] % 256) + chr(item[1]))
assert len(stringsRow[-1]) == 3
rowString = string.join(stringsRow, "")
self.pathData.append(rowString)
self.pathTable = PathTable(self.pathData, self.connections)
def printPathData(self):
'''
Outputs the pickled path table to stdout.
'''
import sys
sys.stdout.write(pickle.dumps(self.pathData, protocol=0))
def initPathData(self):
self.pathData = []
for i in xrange(self.numNodes):
self.pathData.append([
None,
] * self.numNodes)
def addPaths(self, partialData):
for i in xrange(len(partialData)):
for j in xrange(len(partialData[i])):
if partialData[i][j] is not None:
assert self.pathData[i][j] is None
self.pathData[i][j] = partialData[i][j]
## def pathTableLookup(self, startNode, goalNode):
## '''
## Look up the equivalent of pathData[goalNode][startNode] in our run-length encoded data.
## '''
## if startNode >= self.numNodes or goalNode >= self.numNodes:
## raise "Invalid node ID. Must be less than self.numNodes (%s)." % self.numNodes
## str = self.pathData[startNode]
## pos = 0
## while (pos < len(str)) and (256*ord(str[pos]) + ord(str[pos+1]) <= goalNode):
## #print pos, ": ",256*ord(str[pos]) + ord(str[pos+1])
## pos += 3
## pos -= 3
## return ord(str[pos+2])
def findRoute(self, startNode, goalNode):
'''
Returns the node-by-node route from startNode to goalNode.
'''
return self.pathTable.findRoute(startNode, goalNode)
def makeNodeLocator(self, environment):
meshNode = CollisionNode("NavMeshNodeLocator")
meshNode.setFromCollideMask(BitMask32.allOff())
meshNode.setIntoCollideMask(OTPGlobals.PathFindingBitmask)
self.polyHashToPID = {}
for pId in self.polyToAngles:
vertCount = 0
corners = []
for angle in self.polyToAngles[pId]:
if angle != 180:
# It's a corner
corners.append(vertCount)
vertCount += 1
# XXX this code only works for square nodes at present
# Unfortunately we can only make triangle or square CollisionPolygons on the fly
assert len(corners) == 4
#import pdb
#pdb.set_trace()
verts = []
for vert in corners:
verts.append(
(self.vertexCoords[self.polyToVerts[pId][vert]][0],
self.vertexCoords[self.polyToVerts[pId][vert]][1], 0))
#import pdb
#pdb.set_trace()
poly = CollisionPolygon(verts[0], verts[1], verts[2], verts[3])
assert poly not in self.polyHashToPID
self.polyHashToPID[poly] = pId
meshNode.addSolid(poly)
ray = CollisionRay()
ray.setDirection(0, 0, -1)
ray.setOrigin(0, 0, 0)
rayNode = CollisionNode("NavMeshRay")
rayNode.setFromCollideMask(OTPGlobals.PathFindingBitmask)
rayNode.setIntoCollideMask(BitMask32.allOff())
rayNode.addSolid(ray)
self.meshNodePath = environment.attachNewNode(meshNode)
self.rayNodePath = environment.attachNewNode(rayNode)
self.meshNodePath.setTwoSided(True)
self.chq = CollisionHandlerQueue()
self.traverser = CollisionTraverser()
self.traverser.addCollider(self.rayNodePath, self.chq)
def findNodeFromPos(self, environment, x, y):
self.rayNodePath.setPos(environment, x, y, 50000)
self.chq.clearEntries()
self.traverser.traverse(self.meshNodePath)
if self.chq.getNumEntries() != 1:
self.notify.warning("No node found at position: %s, %s in %s" %
(x, y, environment))
return 0
e = self.chq.getEntry(0)
assert e.hasInto()
if not e.hasInto():
self.notify.warning("No into found for collision %s" % (e))
pId = self.polyHashToPID[e.getInto()]
return pId
# --------- Begin long-term storage code ---------
def writeToFile(self, filename, storePathTable=True):
'''
Output the contents of this mesh to the file specified.
Saving to a file lets us avoid doing expensive precomputation every time a mesh instance is required.
'''
if self.environmentHash is None:
raise "Attempted write to file without valid environment hash!"
if storePathTable and not self.pathData:
raise "Attempted to write empty pathData. Call NavMesh.generatePathTable() first!"
f = open(filename, 'wb')
if storePathTable:
pickle.dump([
self.environmentHash, self.polyToVerts, self.polyToAngles,
self.vertexCoords, self.connections, self.pathData
],
f,
protocol=2)
f.close()
self.pathData = None
else:
pickle.dump([
self.environmentHash, self.polyToVerts, self.polyToAngles,
self.vertexCoords, self.connections, None
],
f,
protocol=2)
f.close()
print "Successfully wrote to file %s." % filename
def _initFromString(self, str):
contents = pickle.loads(str)
self.environmentHash = contents[0]
self.polyToVerts = contents[1]
self.polyToAngles = contents[2]
self.vertexCoords = contents[3]
self.connections = contents[4]
self.pathData = contents[5]
if self.pathData is not None:
self.pathTable = PathTable(self.pathData, self.connections)
self.pathData = None
self.numNodes = len(self.connections)
def _initFromFilename(self, filepath, filename):
vfs = VirtualFileSystem.getGlobalPtr()
filename = Filename(filename)
searchPath = DSearchPath()
#searchPath.appendDirectory(Filename('.'))
#searchPath.appendDirectory(Filename('etc'))
#searchPath.appendDirectory(Filename.fromOsSpecific(os.path.expandvars('~')))
#searchPath.appendDirectory(Filename.fromOsSpecific(os.path.expandvars('$HOME')))
searchPath.appendDirectory(
Filename.fromOsSpecific(os.path.expandvars(filepath)))
found = vfs.resolveFilename(filename, searchPath)
if not found:
raise IOError, "File not found!"
str = vfs.readFile(filename, 1)
self._initFromString(str)
def checkHash(self, envHash):
'''
"Does this mesh represent the environment I think it does?"
If this check fails, the mesh is out of date (or being used with the wrong environment).
In either case, whoever generated this instance should discard it and create a new mesh from scratch.
'''
return envHash == self.environmentHash
def addGeometry(self, geomData):
debugGui = dict()
format = GeomVertexFormat.getV3n3t2()
vdata = GeomVertexData('name', format, Geom.UHStatic)
vertex = GeomVertexWriter(vdata, 'vertex')
normal = GeomVertexWriter(vdata, 'normal')
texcoord = GeomVertexWriter(vdata, 'texcoord')
prim = GeomTriangles(Geom.UHStatic)
postphonedTriangles = list()
vtxTargetId0 = vtxTargetId1 = vtxTargetId2 = None
vtxDataCounter = 0
for vtxSourceId0, vtxSourceId1, vtxSourceId2 in geomData.triangles:
vx0,vy0,vz0 = v0 = geomData.getVertex(vtxSourceId0)
vx1,vy1,vz1 = v1 = geomData.getVertex(vtxSourceId1)
vx2,vy2,vz2 = v2 = geomData.getVertex(vtxSourceId2)
# prepare the vertices
uvx0, uvy0 = uv0 = geomData.getUv(vtxSourceId0)
uvx1, uvy1 = uv1 = geomData.getUv(vtxSourceId1)
uvx2, uvy2 = uv2 = geomData.getUv(vtxSourceId2)
#
n0 = geomData.getNormal(vtxSourceId0)
n1 = geomData.getNormal(vtxSourceId1)
n2 = geomData.getNormal(vtxSourceId2)
# make it wrap nicely
if min(uvx0,uvx1,uvx2) < .25 and max(uvx0,uvx1,uvx2) > 0.75:
if uvx0 < 0.25: uvx0 += 1.0
if uvx1 < 0.25: uvx1 += 1.0
if uvx2 < 0.25: uvx2 += 1.0
vertex.addData3f(*v0)
normal.addData3f(*n0)
texcoord.addData2f(*uv0)
vtxTargetId0 = vtxDataCounter
vtxDataCounter += 1
vertex.addData3f(*v1)
normal.addData3f(*n1)
texcoord.addData2f(*uv1)
vtxTargetId1 = vtxDataCounter
vtxDataCounter += 1
vertex.addData3f(*v2)
normal.addData3f(*n2)
texcoord.addData2f(*uv2)
vtxTargetId2 = vtxDataCounter
vtxDataCounter += 1
prim.addVertex(vtxTargetId0)
prim.addVertex(vtxTargetId1)
prim.addVertex(vtxTargetId2)
prim.closePrimitive()
if False:
if vtxSourceId0 not in debugGui:
i = InfoTextBillaboarded(render)
i.setScale(0.05)
i.billboardNodePath.setPos(Vec3(x0,y0,z0)*1.1)
i.setText('%i: %.1f %.1f %.1f\n%.1f %.1f' % (vtxSourceId0, x0,y0,z0, nx0, ny0))
debugGui[vtxSourceId0] = i
if vtxSourceId1 not in debugGui:
i = InfoTextBillaboarded(render)
i.setScale(0.05)
i.billboardNodePath.setPos(Vec3(x1,y1,z1)*1.1)
i.setText('%i: %.1f %.1f %.1f\n%.1f %.1f' % (vtxSourceId1, x1,y1,z1, nx1, ny1))
debugGui[vtxSourceId1] = i
if vtxSourceId2 not in debugGui:
i = InfoTextBillaboarded(render)
i.setScale(0.05)
i.billboardNodePath.setPos(Vec3(x2,y2,z2)*1.1)
i.setText('%i: %.1f %.1f %.1f\n%.1f %.1f' % (vtxSourceId2, x2,y2,z2, nx2, ny2))
debugGui[vtxSourceId2] = i
geom = Geom(vdata)
geom.addPrimitive(prim)
node = GeomNode('gnode')
node.addGeom(geom)
nodePath = self.attachNewNode(node)
return nodePath
class WireGeom:
def __init__(self):
# GeomNode to hold our individual geoms
self.gnode = GeomNode('wirePrim')
# How many times to subdivide our spheres/cylinders resulting vertices. Keep low
# because this is supposed to be an approximate representation
self.subdiv = 12
def drawLine(self, start, end):
# since we're doing line segments, just vertices in our geom
format = GeomVertexFormat.getV3()
# build our data structure and get a handle to the vertex column
vdata = GeomVertexData('', format, Geom.UHStatic)
vertices = GeomVertexWriter(vdata, 'vertex')
# build a linestrip vertex buffer
lines = GeomLinestrips(Geom.UHStatic)
vertices.addData3f(start[0], start[1], start[2])
vertices.addData3f(end[0], end[1], end[2])
lines.addVertices(0, 1)
lines.closePrimitive()
geom = Geom(vdata)
geom.addPrimitive(lines)
# Add our primitive to the geomnode
self.gnode.addGeom(geom)
def drawCircle(self, radius, axis, offset):
# since we're doing line segments, just vertices in our geom
format = GeomVertexFormat.getV3()
# build our data structure and get a handle to the vertex column
vdata = GeomVertexData('', format, Geom.UHStatic)
vertices = GeomVertexWriter(vdata, 'vertex')
# build a linestrip vertex buffer
lines = GeomLinestrips(Geom.UHStatic)
for i in range(0, self.subdiv):
angle = i / float(self.subdiv) * 2.0 * math.pi
ca = math.cos(angle)
sa = math.sin(angle)
if axis == "x":
vertices.addData3f(0, radius * ca, radius * sa + offset)
if axis == "y":
vertices.addData3f(radius * ca, 0, radius * sa + offset)
if axis == "z":
vertices.addData3f(radius * ca, radius * sa, offset)
for i in range(1, self.subdiv):
lines.addVertices(i - 1, i)
lines.addVertices(self.subdiv - 1, 0)
lines.closePrimitive()
geom = Geom(vdata)
geom.addPrimitive(lines)
# Add our primitive to the geomnode
self.gnode.addGeom(geom)
def drawCapsule(self, radius, length, axis):
# since we're doing line segments, just vertices in our geom
format = GeomVertexFormat.getV3()
# build our data structure and get a handle to the vertex column
vdata = GeomVertexData('', format, Geom.UHStatic)
vertices = GeomVertexWriter(vdata, 'vertex')
# build a linestrip vertex buffer
lines = GeomLinestrips(Geom.UHStatic)
# draw upper dome
for i in range(0, self.subdiv / 2 + 1):
angle = i / float(self.subdiv) * 2.0 * math.pi
ca = math.cos(angle)
sa = math.sin(angle)
if axis == "x":
vertices.addData3f(0, radius * ca, radius * sa + (length / 2))
if axis == "y":
vertices.addData3f(radius * ca, 0, radius * sa + (length / 2))
# draw lower dome
for i in range(0, self.subdiv / 2 + 1):
angle = -math.pi + i / float(self.subdiv) * 2.0 * math.pi
ca = math.cos(angle)
sa = math.sin(angle)
if axis == "x":
vertices.addData3f(0, radius * ca, radius * sa - (length / 2))
if axis == "y":
vertices.addData3f(radius * ca, 0, radius * sa - (length / 2))
for i in range(1, self.subdiv + 1):
lines.addVertices(i - 1, i)
lines.addVertices(self.subdiv + 1, 0)
lines.closePrimitive()
geom = Geom(vdata)
geom.addPrimitive(lines)
# Add our primitive to the geomnode
self.gnode.addGeom(geom)
def drawRect(self, width, height, axis):
# since we're doing line segments, just vertices in our geom
format = GeomVertexFormat.getV3()
# build our data structure and get a handle to the vertex column
vdata = GeomVertexData('', format, Geom.UHStatic)
vertices = GeomVertexWriter(vdata, 'vertex')
# build a linestrip vertex buffer
lines = GeomLinestrips(Geom.UHStatic)
# draw a box
if axis == "x":
vertices.addData3f(0, -width, -height)
vertices.addData3f(0, width, -height)
vertices.addData3f(0, width, height)
vertices.addData3f(0, -width, height)
if axis == "y":
vertices.addData3f(-width, 0, -height)
vertices.addData3f(width, 0, -height)
vertices.addData3f(width, 0, height)
vertices.addData3f(-width, 0, height)
if axis == "z":
vertices.addData3f(-width, -height, 0)
vertices.addData3f(width, -height, 0)
vertices.addData3f(width, height, 0)
vertices.addData3f(-width, height, 0)
for i in range(1, 3):
lines.addVertices(i - 1, i)
lines.addVertices(3, 0)
lines.closePrimitive()
geom = Geom(vdata)
geom.addPrimitive(lines)
# Add our primitive to the geomnode
self.gnode.addGeom(geom)
def generate(self, type, radius=1.0, length=1.0, extents=Point3(1, 1, 1)):
if type == 'sphere':
# generate a simple sphere
self.drawCircle(radius, "x", 0)
self.drawCircle(radius, "y", 0)
self.drawCircle(radius, "z", 0)
if type == 'capsule':
# generate a simple capsule
self.drawCapsule(radius, length, "x")
self.drawCapsule(radius, length, "y")
self.drawCircle(radius, "z", -length / 2)
self.drawCircle(radius, "z", length / 2)
if type == 'box':
# generate a simple box
self.drawRect(extents[1], extents[2], "x")
self.drawRect(extents[0], extents[2], "y")
self.drawRect(extents[0], extents[1], "z")
if type == 'cylinder':
# generate a simple cylinder
self.drawLine((0, -radius, -length / 2), (0, -radius, length / 2))
self.drawLine((0, radius, -length / 2), (0, radius, length / 2))
self.drawLine((-radius, 0, -length / 2), (-radius, 0, length / 2))
self.drawLine((radius, 0, -length / 2), (radius, 0, length / 2))
self.drawCircle(radius, "z", -length / 2)
self.drawCircle(radius, "z", length / 2)
if type == 'ray':
# generate a ray
self.drawCircle(length / 10, "x", 0)
self.drawCircle(length / 10, "z", 0)
self.drawLine((0, 0, 0), (0, 0, length))
self.drawLine((0, 0, length), (0, -length / 10, length * 0.9))
self.drawLine((0, 0, length), (0, length / 10, length * 0.9))
if type == 'plane':
# generate a plane
length = 3.0
self.drawRect(1.0, 1.0, "z")
self.drawLine((0, 0, 0), (0, 0, length))
self.drawLine((0, 0, length), (0, -length / 10, length * 0.9))
self.drawLine((0, 0, length), (0, length / 10, length * 0.9))
# rename ourselves to wirePrimBox, etc.
name = self.gnode.getName()
self.gnode.setName(name + type.capitalize())
NP = NodePath(self.gnode) # Finally, make a nodepath to our geom
NP.setColor(0.0, 1.0, 0.0) # Set default color
return NP
def pandaRender(self):
frameList = []
for node in self.compositeFrames.getiterator('composite-frame'):
if node.tag == "composite-frame" and node.attrib.get("id") == str(self.internalFrameIndex):
for frameCallNode in node:
for frameNode in self.frames.getiterator('frame'):
if frameNode.tag == "frame" and frameNode.attrib.get("id") == frameCallNode.attrib.get("id"):
offsetX = 0 if frameCallNode.attrib.get("offset-x") == None else float(frameCallNode.attrib.get("offset-x"))
offsetY = 0 if frameCallNode.attrib.get("offset-y") == None else float(frameCallNode.attrib.get("offset-y"))
tweenId = frameCallNode.attrib.get("tween")
frameInTween = 0 if frameCallNode.attrib.get("frame-in-tween") == None else int(frameCallNode.attrib.get("frame-in-tween"))
addWidth = 0 if frameNode.attrib.get("w") == None else float(frameNode.attrib.get("w"))
addHeight = 0 if frameNode.attrib.get("h") == None else float(frameNode.attrib.get("h"))
sInPixels = 0 if frameNode.attrib.get("s") == None else float(frameNode.attrib.get("s"))
tInPixels = 0 if frameNode.attrib.get("t") == None else float(frameNode.attrib.get("t"))
swInPixels = sInPixels + addWidth
thInPixels = tInPixels + addHeight
s = (sInPixels / self.baseWidth)
t = 1 - (tInPixels / self.baseHeight) # Complemented to deal with loading image upside down.
S = (swInPixels / self.baseWidth)
T = 1 - (thInPixels / self.baseHeight) # Complemented to deal with loading image upside down.
blend = "overwrite" if frameCallNode.attrib.get("blend") == None else frameCallNode.attrib.get("blend")
scaleX = 1 if frameCallNode.attrib.get("scale-x") == None else float(frameCallNode.attrib.get("scale-x"))
scaleY = 1 if frameCallNode.attrib.get("scale-y") == None else float(frameCallNode.attrib.get("scale-y"))
color = Color(1,1,1,1)
tweenHasColor = False
frameCallHasColor = False
frameCallColorName = frameCallNode.attrib.get("color-name")
if frameCallColorName != None:
# Get color at frame call as first resort.
frameCallHasColor = True
for colorNode in self.colors.getiterator('color'):
if colorNode.tag == 'color' and colorNode.attrib.get("name") == frameCallColorName:
R = 1 if colorNode.attrib.get("r") == None else float(colorNode.attrib.get("r"))
G = 1 if colorNode.attrib.get("g") == None else float(colorNode.attrib.get("g"))
B = 1 if colorNode.attrib.get("b") == None else float(colorNode.attrib.get("b"))
A = 1 if colorNode.attrib.get("a") == None else float(colorNode.attrib.get("a"))
color = Color(R, G, B, A)
break # leave for loop when we find the correct color
pass
if tweenId != None and tweenId != "0":
# Get color at tween frame as second resort.
thisTween = None
frameLength = 1
advancementFunction = "linear"
foundTween = False
pointList = []
colorList = []
for tweenNode in self.tweens.getiterator('motion-tween'):
if tweenNode.tag == "motion-tween" and tweenNode.attrib.get("id") == tweenId:
foundTween = True
frameLength = 1 if tweenNode.attrib.get("length-in-frames") == None else tweenNode.attrib.get("length-in-frames")
advancementFunction = "linear" if tweenNode.attrib.get("advancement-function") == None else tweenNode.attrib.get("advancement-function")
for pointOrColorNode in tweenNode.getiterator():
if pointOrColorNode.tag == "point":
pX = 0 if pointOrColorNode.attrib.get("x") == None else float(pointOrColorNode.attrib.get("x"))
pY = 0 if pointOrColorNode.attrib.get("y") == None else float(pointOrColorNode.attrib.get("y"))
pointList.append(Point(pX, pY, 0))
elif pointOrColorNode.tag == "color-state":
colorName = "white" if pointOrColorNode.attrib.get("name") == None else pointOrColorNode.attrib.get("name")
for colorNode in self.colors.getiterator('color'):
if colorNode.tag == 'color' and colorNode.attrib.get("name") == colorName:
R = 1 if colorNode.attrib.get("r") == None else float(colorNode.attrib.get("r"))
G = 1 if colorNode.attrib.get("g") == None else float(colorNode.attrib.get("g"))
B = 1 if colorNode.attrib.get("b") == None else float(colorNode.attrib.get("b"))
A = 1 if colorNode.attrib.get("a") == None else float(colorNode.attrib.get("a"))
colorList.append(Color(R, G, B, A))
break # leave for loop when we find the correct color reference
pass # Run through all child nodes of selected tween
break # Exit after finding correct tween
pass
if foundTween:
thisTween = Tween(frameLength, advancementFunction, pointList, colorList)
offset = thisTween.XYFromFrame(frameInTween);
offsetFromTweenX = int(offset.X);
offsetFromTweenY = int(offset.Y);
offsetX += int(offset.X);
offsetY += int(offset.Y);
if thisTween.hasColorComponent():
tweenHasColor = True;
if frameCallHasColor == False:
color = thisTween.colorFromFrame(frameInTween);
pass
if frameNode.attrib.get("color-name") != None and frameCallHasColor == False and tweenHasColor == False:
# Get color at frame definition as last resort.
for colorNode in colors.getiterator('color'):
if colorNode.tag == 'color' and colorNode.attrib.get("name") == frameNode.attrib.get("color-name"):
R = 1 if colorNode.attrib.get("r") == None else float(colorNode.attrib.get("r"))
G = 1 if colorNode.attrib.get("g") == None else float(colorNode.attrib.get("g"))
B = 1 if colorNode.attrib.get("b") == None else float(colorNode.attrib.get("b"))
A = 1 if colorNode.attrib.get("a") == None else float(colorNode.attrib.get("a"))
color = Color(R, G, B, A)
break # leave for loop when we find the correct color
pass
rotationZ = 0 if frameCallNode.attrib.get("rotation-z") == None else float(frameCallNode.attrib.get("rotation-z"))
frameList.append(Frame(Bound(offsetX, offsetY, addWidth, addHeight), s, t, S, T, blend, scaleX, scaleY, color, rotationZ))
pass
break # Leave once we've found the appropriate frame
# Prepare tracking list of consumed nodes.
self.clearNodesForDrawing()
# Make an identifier to tack onto primitive names in Panda3d's scene graph.
frameIndexForName = 1
# Loop through loaded frames that make up composite frame.
for loadedFrame in frameList:
# For debugging purposes, print the object.
if False:
loadedFrame.printAsString()
# Set up place to store primitive 3d object; note: requires vertex data made by GeomVertexData
squareMadeByTriangleStrips = GeomTristrips(Geom.UHDynamic)
# Set up place to hold 3d data and for the following coordinates:
# square's points (V3: x, y, z),
# the colors at each point of the square (c4: r, g, b, a), and
# for the UV texture coordinates at each point of the square (t2: S, T).
vertexData = GeomVertexData('square-'+str(frameIndexForName), GeomVertexFormat.getV3c4t2(), Geom.UHDynamic)
vertex = GeomVertexWriter(vertexData, 'vertex')
color = GeomVertexWriter(vertexData, 'color')
texcoord = GeomVertexWriter(vertexData, 'texcoord')
# Add the square's data
# Upper-Left corner of square
vertex.addData3f(-loadedFrame.bound.Width / 2.0, 0, -loadedFrame.bound.Height / 2.0)
color.addData4f(loadedFrame.color.R,loadedFrame.color.G,loadedFrame.color.B,loadedFrame.color.A)
texcoord.addData2f(loadedFrame.s, loadedFrame.T)
# Upper-Right corner of square
vertex.addData3f(loadedFrame.bound.Width / 2.0, 0, -loadedFrame.bound.Height / 2.0)
color.addData4f(loadedFrame.color.R,loadedFrame.color.G,loadedFrame.color.B,loadedFrame.color.A)
texcoord.addData2f(loadedFrame.S, loadedFrame.T)
# Lower-Left corner of square
vertex.addData3f(-loadedFrame.bound.Width / 2.0, 0, loadedFrame.bound.Height / 2.0)
color.addData4f(loadedFrame.color.R,loadedFrame.color.G,loadedFrame.color.B,loadedFrame.color.A)
texcoord.addData2f(loadedFrame.s, loadedFrame.t)
# Lower-Right corner of square
vertex.addData3f(loadedFrame.bound.Width / 2.0, 0, loadedFrame.bound.Height / 2.0)
color.addData4f(loadedFrame.color.R,loadedFrame.color.G,loadedFrame.color.B,loadedFrame.color.A)
texcoord.addData2f(loadedFrame.S, loadedFrame.t)
# Pass data to primitive
squareMadeByTriangleStrips.addNextVertices(4)
squareMadeByTriangleStrips.closePrimitive()
square = Geom(vertexData)
square.addPrimitive(squareMadeByTriangleStrips)
# Pass primtive to drawing node
drawPrimitiveNode=GeomNode('square-'+str(frameIndexForName))
drawPrimitiveNode.addGeom(square)
# Pass node to scene (effect camera)
nodePath = self.effectCameraNodePath.attachNewNode(drawPrimitiveNode)
# Linear dodge:
if loadedFrame.blendMode == "darken":
nodePath.setAttrib(ColorBlendAttrib.make(ColorBlendAttrib.MAdd, ColorBlendAttrib.OOneMinusFbufferColor, ColorBlendAttrib.OOneMinusIncomingColor))
pass
elif loadedFrame.blendMode == "multiply":
nodePath.setAttrib(ColorBlendAttrib.make(ColorBlendAttrib.MAdd, ColorBlendAttrib.OFbufferColor, ColorBlendAttrib.OZero))
pass
elif loadedFrame.blendMode == "color-burn":
nodePath.setAttrib(ColorBlendAttrib.make(ColorBlendAttrib.MAdd, ColorBlendAttrib.OZero, ColorBlendAttrib.OOneMinusIncomingColor))
pass
elif loadedFrame.blendMode == "linear-burn":
nodePath.setAttrib(ColorBlendAttrib.make(ColorBlendAttrib.MAdd, ColorBlendAttrib.OZero, ColorBlendAttrib.OIncomingColor))
pass
elif loadedFrame.blendMode == "lighten":
nodePath.setAttrib(ColorBlendAttrib.make(ColorBlendAttrib.MMax, ColorBlendAttrib.OIncomingColor, ColorBlendAttrib.OFbufferColor))
pass
elif loadedFrame.blendMode == "color-dodge":
nodePath.setAttrib(ColorBlendAttrib.make(ColorBlendAttrib.MAdd, ColorBlendAttrib.OOne, ColorBlendAttrib.OOne))
pass
elif loadedFrame.blendMode == "linear-dodge":
nodePath.setAttrib(ColorBlendAttrib.make(ColorBlendAttrib.MAdd, ColorBlendAttrib.OOne, ColorBlendAttrib.OOneMinusIncomingColor))
pass
else: # Overwrite:
nodePath.setAttrib(ColorBlendAttrib.make(ColorBlendAttrib.MAdd, ColorBlendAttrib.OIncomingAlpha, ColorBlendAttrib.OOneMinusIncomingAlpha))
pass
nodePath.setDepthTest(False)
# Apply texture
nodePath.setTexture(self.tex)
# Apply translation, then rotation, then scaling to node.
nodePath.setPos((loadedFrame.bound.X + loadedFrame.bound.Width / 2.0, 1, -loadedFrame.bound.Y - loadedFrame.bound.Height / 2.0))
nodePath.setR(loadedFrame.rotationZ)
nodePath.setScale(loadedFrame.scaleX, 1, loadedFrame.scaleY)
nodePath.setTwoSided(True)
self.consumedNodesList.append(nodePath)
frameIndexForName = frameIndexForName + 1
# Loop continues on through each frame called in the composite frame.
pass
def draw(self):
format = GeomVertexFormat.getV3n3cpt2()
vdata = GeomVertexData('square', format, Geom.UHStatic)
vertex = GeomVertexWriter(vdata, 'vertex')
normal = GeomVertexWriter(vdata, 'normal')
color = GeomVertexWriter(vdata, 'color')
texcoord = GeomVertexWriter(vdata, 'texcoord')
#make sure we draw the sqaure in the right plane
#if x1!=x2:
vertex.addData3f(self.x1, self.y1, self.z1)
vertex.addData3f(self.x2, self.y1, self.z1)
vertex.addData3f(self.x2, self.y2, self.z2)
vertex.addData3f(self.x1, self.y2, self.z2)
normal.addData3f(
Vec3(2 * self.x1 - 1, 2 * self.y1 - 1,
2 * self.z1 - 1).normalize())
normal.addData3f(
Vec3(2 * self.x2 - 1, 2 * self.y1 - 1,
2 * self.z1 - 1).normalize())
normal.addData3f(
Vec3(2 * self.x2 - 1, 2 * self.y2 - 1,
2 * self.z2 - 1).normalize())
normal.addData3f(
Vec3(2 * self.x1 - 1, 2 * self.y2 - 1,
2 * self.z2 - 1).normalize())
#adding different colors to the vertex for visibility
color.addData4f(self.r, self.g, self.b, self.a)
color.addData4f(self.r, self.g, self.b, self.a)
color.addData4f(self.r, self.g, self.b, self.a)
color.addData4f(self.r, self.g, self.b, self.a)
texcoord.addData2f(0.0, 1.0)
texcoord.addData2f(0.0, 0.0)
texcoord.addData2f(1.0, 0.0)
texcoord.addData2f(1.0, 1.0)
#quads arent directly supported by the Geom interface
#you might be interested in the CardMaker class if you are
#interested in rectangle though
tri1 = GeomTriangles(Geom.UHStatic)
tri2 = GeomTriangles(Geom.UHStatic)
tri1.addVertex(0)
tri1.addVertex(1)
tri1.addVertex(3)
tri2.addConsecutiveVertices(1, 3)
tri1.closePrimitive()
tri2.closePrimitive()
square = Geom(vdata)
square.addPrimitive(tri1)
square.addPrimitive(tri2)
#square.setIntoCollideMask(BitMask32.bit(1))
self.squareNP = NodePath(GeomNode('square gnode'))
self.squareNP.node().addGeom(square)
self.squareNP.setTransparency(1)
self.squareNP.setAlphaScale(.5)
self.squareNP.setTwoSided(True)
#squareNP.setCollideMask(BitMask32.bit(1))
self.squareNP.reparentTo(self.parent)
return self.squareNP
def __setupCollisionHandling(self, collisionHandler, collisionTraverser):
if not collisionTraverser.getRespectPrevTransform():
collisionTraverser.setRespectPrevTransform(True)
# We do this so we don't take into account the actual model, but the collision sphere
self.actor.setCollideMask(BitMask32.allOff())
self.node().getPhysicsObject().setMass(self.massKg)
base.physicsMgr.attachPhysicalNode(self.node())
fromObject = self.attachNewNode(CollisionNode(self.name + " collision node"))
fromObject.node().setIntoCollideMask(fromObject.node().getIntoCollideMask() & ~GeomNode.getDefaultCollideMask())
fromObject.node().setFromCollideMask(self.collisionMask)
fromObject.node().addSolid(CollisionSphere(0, 0, 2.5, 2.5))
collisionHandler.addCollider(fromObject, self)
collisionTraverser.addCollider(fromObject, collisionHandler)
def draw_body(self, position, vector_list, radius = 1, keep_drawing = True, num_vertices = 8):
circle_geom = Geom(self.vdata)
vertex_writer = GeomVertexWriter(self.vdata, "vertex")
color_writer = GeomVertexWriter(self.vdata, "color")
normal_writer = GeomVertexWriter(self.vdata, "normal")
draw_rewriter = GeomVertexRewriter(self.vdata, "drawFlag")
tex_rewriter = GeomVertexRewriter(self.vdata, "texcoord")
start_row = self.vdata.getNumRows()
vertex_writer.setRow(start_row)
color_writer.setRow(start_row)
normal_writer.setRow(start_row)
sCoord = 0
if start_row != 0:
tex_rewriter.setRow(start_row - num_vertices)
sCoord = tex_rewriter.getData2f().getX() + 1
draw_rewriter.setRow(start_row - num_vertices)
if draw_rewriter.getData1f() == False:
sCoord -= 1
draw_rewriter.setRow(start_row)
tex_rewriter.setRow(start_row)
angle_slice = 2 * math.pi / num_vertices
current_angle = 0
perp1 = vector_list[1]
perp2 = vector_list[2]
# write vertex information
for i in range(num_vertices):
adjacent_circle = position + (perp1 * math.cos(current_angle) + perp2 * math.sin(current_angle)) * radius
normal = perp1 * math.cos(current_angle) + perp2 * math.sin(current_angle)
normal_writer.addData3f(normal)
vertex_writer.addData3f(adjacent_circle)
tex_rewriter.addData2f(sCoord, (i + 0.001) / (num_vertices - 1))
color_writer.addData4f(0.5, 0.5, 0.5, 1.0)
draw_rewriter.addData1f(keep_drawing)
current_angle += angle_slice
draw_reader = GeomVertexReader(self.vdata, "drawFlag")
draw_reader.setRow(start_row - num_vertices)
# we can't draw quads directly so use Tristrips
if start_row != 0 and draw_reader.getData1f() != False:
lines = GeomTristrips(Geom.UHStatic)
half = int(num_vertices * 0.5)
for i in range(num_vertices):
lines.addVertex(i + start_row)
if i < half:
lines.addVertex(i + start_row - half)
else:
lines.addVertex(i + start_row - half - num_vertices)
lines.addVertex(start_row)
lines.addVertex(start_row - half)
lines.closePrimitive()
lines.decompose()
circle_geom.addPrimitive(lines)
circle_geom_node = GeomNode("Debug")
circle_geom_node.addGeom(circle_geom)
circle_geom_node.setAttrib(CullFaceAttrib.makeReverse(), 1)
self.get_model().attachNewNode(circle_geom_node)
def make_layer(self, i, a, b):
# get data
data = self.subdata[a][b]
# set color + alpha of vertex texture
def ap(n):
alpha = 0
if i == n:
alpha = 1.0
return alpha
def tp(n):
list = [0, 0, 0, 0]
if i == n:
list = [1, 1, 1, 0.75]
return list
# set vertex data
vdata = GeomVertexData('plane', GeomVertexFormat.getV3n3c4t2(), Geom.UHStatic)
vertex = GeomVertexWriter(vdata, 'vertex')
normal = GeomVertexWriter(vdata, 'normal')
color = GeomVertexWriter(vdata, 'color')
uv = GeomVertexWriter(vdata, 'texcoord')
# set vertices
number = 0
for x in range(0, len(data) - 1):
for y in range(0, len(data[x]) - 1):
# get vertex data
v1 = Vec3(x, y, data[x][y]['h'])
c1 = data[x][y]['c']
t1 = data[x][y]['texnum']
v2 = Vec3(x+1, y, data[x+1][y]['h'])
c2 = data[x+1][y]['c']
t2 = data[x+1][y]['texnum']
v3 = Vec3(x+1, y+1, data[x+1][y+1]['h'])
c3 = data[x+1][y+1]['c']
t3 = data[x+1][y+1]['texnum']
v4 = Vec3(x, y+1, data[x][y+1]['h'])
c4 = data[x][y+1]['c']
t4 = data[x][y+1]['texnum']
n=(0, 0, 1) # normal
# assign vertex colors + alpha
a1, a2, a3, a4 = ap(t1), ap(t2), ap(t3), ap(t4)
t1, t2, t3, t4 = tp(t1), tp(t2), tp(t3), tp(t4)
if v1[2]==0:
t1 = [data[x][y]['c'][0], data[x][y]['c'][1], data[x][y]['c'][2],
a1]
if v2[2]==0:
t2 = [data[x+1][y]['c'][0], data[x+1][y]['c'][1],
data[x+1][y]['c'][2], a2]
if v3[2]==0:
t3 = [data[x+1][y+1]['c'][0], data[x+1][y+1]['c'][1],
data[x+1][y+1]['c'][2], a3]
if v4[2]==0:
t4 = [data[x][y+1]['c'][0], data[x][y+1]['c'][1],
data[x][y+1]['c'][2], a4]
if a1 == 0 and a2 == 0 and a3 == 0 and a4 == 0:
continue
# add vertices
vertex.addData3f(v1)
normal.addData3f(*n)
color.addData4f(*t1)
uv.addData2f(0,0)
vertex.addData3f(v2)
normal.addData3f(*n)
color.addData4f(*t2)
uv.addData2f(1,0)
vertex.addData3f(v3)
normal.addData3f(*n)
color.addData4f(*t3)
uv.addData2f(1,1)
vertex.addData3f(v1)
normal.addData3f(*n)
color.addData4f(*t1)
uv.addData2f(0,0)
vertex.addData3f(v3)
normal.addData3f(*n)
color.addData4f(*t3)
uv.addData2f(1,1)
vertex.addData3f(v4)
normal.addData3f(*n)
color.addData4f(*t4)
uv.addData2f(0,1)
number = number + 2
# add triangles
prim = GeomTriangles(Geom.UHStatic)
for n in range(number):
prim.addVertices((n * 3) + 2, (n * 3) + 0, (n * 3) + 1)
prim.closePrimitive()
# make geom
geom = Geom(vdata)
geom.addPrimitive(prim)
# make geom node
node = GeomNode("layer" + str(i) + "_" + str(a) + "_" + str(b))
node.addGeom(geom)
# make mesh nodePath
mesh = NodePath(node)
# load and assign texture
txfile = self.tiles[i]['tex']
tx = base.loader.loadTexture(txfile)
tx.setMinfilter(Texture.FTLinearMipmapLinear)
mesh.setDepthTest(DepthTestAttrib.MLessEqual)
mesh.setDepthWrite(False)
mesh.setTransparency(True)
mesh.setTexture(tx)
# set render order
mesh.setBin("", 1)
# locate mesh
mesh.setPos(self.divsep * (a * int(len(self.data[a]) / self.div)),
self.divsep * (b * int(len(self.data[b]) / self.div)), 0.001)
# reparent mesh
mesh.reparentTo(self.root)
# return mesh
return mesh
def make_base(self, a, b):
# get data
data = self.subdata[a][b]
# set vertex data
vdata = GeomVertexData('plane', GeomVertexFormat.getV3n3c4t2(), Geom.UHStatic)
vertex = GeomVertexWriter(vdata, 'vertex')
normal = GeomVertexWriter(vdata, 'normal')
color = GeomVertexWriter(vdata, 'color')
uv = GeomVertexWriter(vdata, 'texcoord')
# set vertices
number = 0
for x in range(0, len(data) - 1):
for y in range(0, len(data[x]) - 1):
# get vertex data
v1 = Vec3(x, y, data[x][y]['h'])
v2 = Vec3(x + 1, y, data[x+1][y]['h'])
v3 = Vec3(x + 1, y + 1, data[x+1][y+1]['h'])
v4 = Vec3(x, y + 1, data[x][y+1]['h'])
n = (0, 0, 1) # normal
# assign vertex colors + alpha
option = 1 # black
if option == 1:
c = 0
c1 = [c, c, c, 1]
c2 = [c, c, c, 1]
c3 = [c, c, c, 1]
c4 = [c, c, c, 1]
# option2: color vertices
if option == 2:
alpha = 1.0
c1 = [data[x][y]['c'][0], data[x][y]['c'][1],
data[x][y]['c'][2], alpha]
c2 = [data[x+1][y]['c'][0], data[x+1][y]['c'][1],
data[x+1][y]['c'][2], alpha]
c3 = [data[x+1][y+1]['c'][0], data[x+1][y+1]['c'][1],
data[x+1][y+1]['c'][2], alpha]
c4 = [data[x][y+1]['c'][0], data[x][y+1]['c'][1],
data[x][y+1]['c'][2], alpha]
if option == 3:
c1 = self.color_vertex(v1)
c2 = self.color_vertex(v2)
c3 = self.color_vertex(v3)
c4 = self.color_vertex(v4)
vertex.addData3f(v1)
normal.addData3f(*n)
color.addData4f(*c1)
uv.addData2f(0,0)
vertex.addData3f(v2)
normal.addData3f(*n)
color.addData4f(*c2)
uv.addData2f(1,0)
vertex.addData3f(v3)
normal.addData3f(*n)
color.addData4f(*c3)
uv.addData2f(1,1)
vertex.addData3f(v1)
normal.addData3f(*n)
color.addData4f(*c1)
uv.addData2f(0,0)
vertex.addData3f(v3)
normal.addData3f(*n)
color.addData4f(*c3)
uv.addData2f(1,1)
vertex.addData3f(v4)
normal.addData3f(*n)
color.addData4f(*c4)
uv.addData2f(0,1)
# # add vertex h
# vertex.addData3f(v1)
# # normal.addData3f(*n)
# vertex.addData3f(v2)
# # normal.addData3f(*n)
# vertex.addData3f(v3)
# # normal.addData3f(*n)
# vertex.addData3f(v1)
# # normal.addData3f(*n)
# vertex.addData3f(v3)
# # normal.addData3f(*n)
# vertex.addData3f(v4)
# # normal.addData3f(*n)
# # add vertex color
# color.addData4f(*c1)
# color.addData4f(*c2)
# color.addData4f(*c3)
# color.addData4f(*c1)
# color.addData4f(*c3)
# color.addData4f(*c4)
# iterate
number = number + 2
# add triangles
prim = GeomTriangles(Geom.UHStatic)
for n in range(number):
prim.addVertices((n * 3) + 2, (n * 3) + 0, (n * 3) + 1)
prim.closePrimitive()
# make geom
geom = Geom(vdata)
geom.addPrimitive(prim)
# make geom node
node = GeomNode("base" + "_" + str(a) + "_" + str(b))
node.addGeom(geom)
# make mesh nodePath
mesh = NodePath(node)
# set render order
mesh.setBin("", 1)
# locate mesh
mesh.setPos(self.divsep * (a * int(len(self.data[a]) / self.div)),
self.divsep * (b * int(len(self.data[b]) / self.div)), 0)
# reparent mesh
mesh.reparentTo(self.root)
# return mesh
return mesh
