def assert_fields(card1, card2):
try:
fields1 = wipeEmptyFields(card1.reprFields())
fields2 = wipeEmptyFields(card2.reprFields())
except:
print("card1 = \n%s" % (card1))
print("card2 = \n%s" % (card2))
raise
if len(fields1) != len(fields2):
msg = ('len(fields1)=%s len(fields2)=%s\n%r\n%r\n%s\n%s' %
(len(fields1), len(fields2), fields1, fields2,
printCard(fields1), printCard(fields2)))
raise RuntimeError(msg)
for (i, field1, field2) in izip(count(), fields1, fields2):
value1 = print_field(field1)
value2 = print_field(field2)
if value1 != value2:
msg = 'value1 != value2\n'
msg += ('cardName=%s ID=%s i=%s field1=%r field2=%r value1=%r '
'value2=%r\n%r\n%r' %
(fields1[0], fields1[1], i, field1, field2, value1, value2,
fields1, fields2))
raise RuntimeError(msg)
def assert_fields(card1, card2):
try:
fields1 = wipeEmptyFields(card1.reprFields())
fields2 = wipeEmptyFields(card2.reprFields())
except:
print("card1 = \n%s" % (card1))
print("card2 = \n%s" % (card2))
raise
if len(fields1) != len(fields2):
msg = ('len(fields1)=%s len(fields2)=%s\n%r\n%r\n%s\n%s'
% (len(fields1), len(fields2), fields1, fields2,
printCard(fields1), printCard(fields2)))
raise RuntimeError(msg)
for (i, field1, field2) in izip(count(), fields1, fields2):
value1 = print_field(field1)
value2 = print_field(field2)
if value1 != value2:
msg = 'value1 != value2\n'
msg += ('cardName=%s ID=%s i=%s field1=%r field2=%r value1=%r '
'value2=%r\n%r\n%r' % (fields1[0], fields1[1], i,
field1, field2, value1, value2,
fields1, fields2))
raise RuntimeError(msg)
def write_rejects(self):
"""
writes the rejected (processed) cards and the rejected unprocessed
cardLines
"""
msg = ""
if self.reject_cards:
msg += "$REJECTS\n"
for reject_card in self.reject_cards:
try:
msg += printCard(reject_card)
except RuntimeError:
for field in reject_card:
if field is not None and "=" in field:
raise SyntaxError("cannot reject equal signed " "cards\ncard=%s\n" % (reject_card))
raise
if self.rejects:
msg += "$REJECT_LINES\n"
for reject_lines in self.rejects:
if reject_lines[0][0] == " ":
continue
else:
for reject in reject_lines:
reject2 = reject.rstrip()
if reject2:
msg += str(reject2) + "\n"
return msg
def write_rejects(self):
"""
writes the rejected (processed) cards and the rejected unprocessed
cardLines
"""
msg = ''
if self.reject_cards:
msg += '$REJECTS\n'
for reject_card in self.reject_cards:
try:
msg += printCard(reject_card)
except RuntimeError:
for field in reject_card:
if field is not None and '=' in field:
raise SyntaxError('cannot reject equal signed '
'cards\ncard=%s\n' %
(reject_card))
raise
if self.rejects:
msg += '$REJECT_LINES\n'
for reject_lines in self.rejects:
if reject_lines[0][0] == ' ':
continue
else:
for reject in reject_lines:
reject2 = reject.rstrip()
if reject2:
msg += str(reject2) + '\n'
return msg
def exportToNastran(self, fname, points, elements, regions):
from pyNastran.bdf.fieldWriter import printCard
f = open(fname, 'wb')
for nid, grid in enumerate(1, points):
(x, y, z) = grid
f.write(printCard(['GRID', nid, '', x, y, z]))
###
e = 1e7
nu = 0.3
g = ''
thickness = 0.25
setRegions = list(set(regions))
for pidMid in setRegions:
f.write(printCard(['MAT1', pidMid, e, g, nu]))
f.write(printCard(['PSHELL', pidMid, pidMid, thickness]))
###
for eid, (nodes, region) in enumerate(1, izip(elements, regions)):
(n1, n2, n3) = nodes
f.write(printCard(['CTRIA3', eid, region, n1, n2, n3]))
###
f.close()
def createPlane(self, width, height, nx, ny, eidStart):
"""
Creates a quadrilateral plane made of CTRIA3s. This output
can be intersected with another geometry.
@param width width of plane
@param height height of plane
@param nx number of elements along the width
@param ny number of elements along the height
@param eidStart the starting elementID
1-----2
| \ B |
| A \ |
4-----3
"""
assert nx > 0
assert ny > 0
dx = width / nx
dy = height / ny
nidStart = 200
n = nidStart
#x=[]; y=[]
ij_NMap = {}
points = {}
for j in xrange(ny + 1):
yi = dy * j
for i in xrange(nx + 1):
xi = dx * i
points[n] = array([xi, yi, 0.])
ij_NMap[(i, j)] = n
n += 1
elements = []
for j in xrange(ny):
for i in xrange(nx):
element = [ij_NMap[(i, j)],
ij_NMap[(i + 1, j)],
ij_NMap[(i + 1, j + 1)], ]
elements.append(element)
element = [ij_NMap[(i, j)],
ij_NMap[(i + 1, j + 1)],
ij_NMap[(i, j + 1)], ]
elements.append(element)
#origin = [width/2,height/2,0.]
origin = [0., 0., -1.]
zAxis = array([0., 1., 0.])
xAxis = array([1., 0., 0.])
f = open('plane.bdf', 'wb')
#f.write('SOL 101\n')
#f.write('CEND\n')
#f.write('BEGIN BULK\n')
cid = 200
rid = 0
coord = ['CORD2R', cid, rid, origin[0], origin[1], origin[2],
zAxis[0], zAxis[1], zAxis[2],
xAxis[0], xAxis[1], xAxis[2]]
f.write(printCard(coord))
for nid, point in sorted(points.iteritems()):
(x, y, z) = point
node = ['GRID', nid, cid, x, y, z]
f.write(printCard(node))
pid = 123
mid = pid
eidStart = 200
for eid, element in enumerate(elements):
(n1, n2, n3) = element
tri = ['CTRIA3', eid + eidStart, pid, n1, n2, n3]
f.write(printCard(tri))
shell = ['PSHELL', pid, mid, 1.0]
f.write(printCard(shell))
mat = ['MAT1', mid, 1e7, None, 0.3]
f.write(printCard(mat))
#f.write('ENDDATA\n')
f.close()
return points, elements
def printCard(self, fields, tol=0.):
"""prints a card object"""
return printCard(fields, tol)
def createPlane(self, width, height, nx, ny, eidStart):
"""
Creates a quadrilateral plane made of CTRIA3s. This output
can be intersected with another geometry.
@param width width of plane
@param height height of plane
@param nx number of elements along the width
@param ny number of elements along the height
@param eidStart the starting elementID
1-----2
| \ B |
| A \ |
4-----3
"""
assert nx > 0
assert ny > 0
dx = width / nx
dy = height / ny
nidStart = 200
n = nidStart
#x=[]; y=[]
ij_NMap = {}
points = {}
for j in xrange(ny + 1):
yi = dy * j
for i in xrange(nx + 1):
xi = dx * i
points[n] = array([xi, yi, 0.])
ij_NMap[(i, j)] = n
n += 1
elements = []
for j in xrange(ny):
for i in xrange(nx):
element = [
ij_NMap[(i, j)],
ij_NMap[(i + 1, j)],
ij_NMap[(i + 1, j + 1)],
]
elements.append(element)
element = [
ij_NMap[(i, j)],
ij_NMap[(i + 1, j + 1)],
ij_NMap[(i, j + 1)],
]
elements.append(element)
#origin = [width/2,height/2,0.]
origin = [0., 0., -1.]
zAxis = array([0., 1., 0.])
xAxis = array([1., 0., 0.])
f = open('plane.bdf', 'wb')
#f.write('SOL 101\n')
#f.write('CEND\n')
#f.write('BEGIN BULK\n')
cid = 200
rid = 0
coord = [
'CORD2R', cid, rid, origin[0], origin[1], origin[2], zAxis[0],
zAxis[1], zAxis[2], xAxis[0], xAxis[1], xAxis[2]
]
f.write(printCard(coord))
for nid, point in sorted(points.iteritems()):
(x, y, z) = point
node = ['GRID', nid, cid, x, y, z]
f.write(printCard(node))
pid = 123
mid = pid
eidStart = 200
for eid, element in enumerate(elements):
(n1, n2, n3) = element
tri = ['CTRIA3', eid + eidStart, pid, n1, n2, n3]
f.write(printCard(tri))
shell = ['PSHELL', pid, mid, 1.0]
f.write(printCard(shell))
mat = ['MAT1', mid, 1e7, None, 0.3]
f.write(printCard(mat))
#f.write('ENDDATA\n')
f.close()
return points, elements
def printCard(self, fields, tol=0.):
"""prints a card object"""
return printCard(fields, tol)
