def main():
parser = optparse.OptionParser()
parser.set_defaults(action="none",
dhost="localhost",
dport="5432",
ddriver="pgsql",
duser="******",
dpasswd="",
loaddir=".",
quiet=False,
verbose=False,
debug=False,
full=False,
diskcopy=False,
getdiskcopy=False,
rebuildtables=False,
flscriptparser=False,
addchecks=False,
preparse=False,
rebuildalone=False,
reindex=False,
transactions=False,
files_loaded=[],
seqsync=None,
pgsqlnodrop=False,
forgottables=False,
cleanfiles=False,
nopg=False,
updatemodules=False,
modules={})
parser.add_option("--onlyalone",
help="Forbid rebuilds if other users are connected",
dest="rebuildalone",
action="store_true")
parser.add_option(
"--add-pkeys",
help="Try to add new primary keys if they're not on the dest database",
dest="addpkeys",
action="store_true")
parser.add_option(
"--index",
help=
"Drop indexes and create them again whenever the MTD file is processed",
dest="index",
action="store_true")
parser.add_option(
"--reindex",
help=
"Drop indexes and create them again whenever the MTD file is processed",
dest="reindex",
action="store_true")
parser.add_option(
"--loindex",
help="Disables most indexes used by Eneboo to enhance write speed",
dest="loindex",
action="store_true")
parser.add_option("--diskcopy",
help="Create a backup .pydbabackup",
dest="diskcopy",
action="store_true")
parser.add_option("--getdiskcopy",
help="Loads a .pydbabackup",
dest="getdiskcopy")
parser.add_option(
"--addchecks",
help="Creates database checks (constraints, unique indexes)",
dest="addchecks",
action="store_true")
parser.add_option("--preparse",
help="Checks and parses all MTD's",
dest="preparse",
action="store_true")
parser.add_option("--transactional",
help="Use transactions inside PyDBA",
dest="transactions",
action="store_true")
parser.add_option("--cleanfiles",
help="Purge old data on flfiles table",
dest="cleanfiles",
action="store_true")
parser.add_option("--debug",
help="Tons of debug output",
dest="debug",
action="store_true")
parser.add_option(
"--safe",
help="Enable safe mode. Disables table rebuild and psql load/drop.",
dest="safe",
action="store_true")
parser.add_option("--pg-nodrop",
help="Disables dropping psql objects before load.",
dest="pgsqlnodrop",
action="store_true")
parser.add_option("--nopg",
help="Disables creation/deletion of objects",
dest="nopg",
action="store_true")
parser.add_option("-v",
help="Be more verbose",
dest="verbose",
action="store_true")
parser.add_option("-q",
help="Quiet. Produce less output.",
dest="quiet",
action="store_true")
parser.add_option("-P",
help="Parse QS Files using flscriptarser",
dest="flscriptparser",
action="store_true")
parser.add_option("--full",
help="Deeper and slower checks",
dest="full",
action="store_true")
parser.add_option("--rebuildtables",
help="DROP and CREATE tables again",
dest="rebuildtables",
action="store_true")
parser.add_option(
"--forgottables",
help=
"Update Metadata always and forgot what tables are pending a rebuild",
dest="forgottables",
action="store_true")
parser.add_option("--updatemodules",
help="Update Modules doing a DELETE - INSERT",
dest="updatemodules",
action="store_true")
g_action = optparse.OptionGroup(parser, "Actions",
"You MUST provide one of :")
# ******************* ACTIONS
g_action.add_option("-T",
"--TEST",
action="store_const",
const="test_pydba",
dest="action",
help="Do some checks on PyDBA")
g_action.add_option("-l",
"--lmod",
action="store_const",
const="load_module",
dest="action",
help="load modules")
g_action.add_option("-L",
"--Lmod",
action="store_const",
const="load_module_sql",
dest="action",
help="load create SQL and modules")
g_action.add_option("-r",
"--run",
action="store_const",
const="run_module",
dest="action",
help="load modules and run Eneboo")
g_action.add_option("-O",
"--olap",
action="store_const",
const="setup_olap",
dest="action",
help="setup olap tables (obsolete, use -Y)")
g_action.add_option("-Y",
"--export-yaml",
action="store_const",
const="setup_olap",
dest="action",
help="export metadata as Yaml")
g_action.add_option("-m",
"--reload-mtd",
action="store_const",
const="reload_mtd",
dest="action",
help="Parses MTD files on DB and complete tables")
g_action.add_option("-R",
"--repairdb",
action="store_const",
const="repair_db",
dest="action",
help="Execute tests to repair DB")
g_action.add_option("-D",
"--dump",
action="store_const",
const="dump_db",
dest="action",
help="Dumps flfiles to disk")
g_action.add_option("--create",
"--createdb",
action="store_const",
const="create_db",
dest="action",
help="Create a new Database with basic fl* tables")
g_action.add_option("-c",
"--check",
action="store_const",
const="check",
dest="action",
help="Check relations for the DB")
g_action.add_option("-M",
"--mysql2pgsql",
action="store_const",
const="mysql_convert",
dest="action",
help="Convert MySQL Database to PostgreSQL")
parser.add_option_group(g_action)
# ******************* CONFIG
g_options = optparse.OptionGroup(
parser, "Options",
"Optional database and host selection. Some actions use them")
g_options.add_option("--dhost",
dest="dhost",
help="Set the destination host")
g_options.add_option("--dport",
dest="dport",
help="Set the destination port")
g_options.add_option("--ddriver",
dest="ddriver",
help="Set the driver for dest DB (mysql; pgsql)")
g_options.add_option("--ddb",
dest="ddb",
help="Set DDB as destination Database")
g_options.add_option("--duser",
dest="duser",
help="Provide user for DB connection")
g_options.add_option("--dpasswd",
dest="dpasswd",
help="Provide password for DB connection")
g_options.add_option("--ohost", dest="ohost", help="Set the origin host")
g_options.add_option("--oport", dest="oport", help="Set the origin port")
g_options.add_option("--odriver",
dest="odriver",
help="Set the driver for origin DB (mysql; pgsql)")
g_options.add_option("--odb",
dest="odb",
help="Set DDB as origin Database")
g_options.add_option("--ouser",
dest="ouser",
help="Provide user for origin DB connection")
g_options.add_option("--opasswd",
dest="opasswd",
help="Provide password for origin DB connection")
g_options.add_option("--loaddir",
dest="loaddir",
help="Select Working Directory for Modules")
g_options.add_option(
"--loadbaselec",
dest="loadbaselec",
help="Import CSV File to Baselec table ('-' for stdin)")
g_options.add_option("--loadini",
dest="loadini",
help="load and execute INI file")
parser.add_option_group(g_options)
#parser.add_option("-f", "--file", dest="filename",
# help="write report to FILE", metavar="FILE")
#parser.add_option("-q", "--quiet",
# action="store_false", dest="verbose", default=True,
# help="don't print status messages to stdout")
for param in os.environ.keys():
if param[:5] == "PYDBA":
value = os.environ[param]
if param == "PYDBA_DHOST":
parser.set_defaults(dhost=value)
elif param == "PYDBA_DUSER":
parser.set_defaults(duser=value)
elif param == "PYDBA_DPASSWD":
parser.set_defaults(dpasswd=value)
elif param == "PYDBA_DPORT":
parser.set_defaults(dport=value)
else:
print "Unknown env var: %20s %s" % (param, value)
(options, args) = parser.parse_args()
if options.loadini:
exec_ini(options, options.loadini)
if options.ddriver and not options.odriver:
options.odriver = options.ddriver
if options.dhost and not options.ohost: options.ohost = options.dhost
if options.duser and not options.ouser: options.ouser = options.duser
if options.dpasswd and not options.opasswd:
options.opasswd = options.dpasswd
if options.ddb and not options.odb: options.odb = options.ddb
if options.dport and not options.oport: options.oport = options.dport
if options.diskcopy:
options.full = True
#options.rebuildtables = True
if options.safe:
if options.rebuildtables:
print u"WARN: Se solicitó rebuildtables, pero safemode está activo."
options.rebuildtables = False
if (options.action == "setup_olap" or options.action == "check"
or options.getdiskcopy or options.diskcopy):
options.preparse = True
if (options.action == "none"):
print "You must provide at least one action"
elif (options.action == "run_module"):
db = load_module(options, preparse=options.preparse)
repair_db(options, db)
try:
subprocess.call([
"eneboo", "-silentconn", ":".join([
options.ddb, options.duser, "PostgreSQL", options.dhost,
options.dport, options.dpasswd
])
])
except KeyboardInterrupt, e:
print "<KeyboardInterrupt>"
def main():
parser = optparse.OptionParser()
parser.set_defaults(
action="none",
dhost="localhost",
dport="5432",
ddriver="pgsql",
duser="******",
dpasswd="",
loaddir=".",
quiet=False,
verbose=False,
debug=False,
full=False,
diskcopy=False,
getdiskcopy=False,
rebuildtables=False,
flscriptparser=False,
addchecks=False,
preparse=False,
rebuildalone=False,
reindex=False,
transactions=False,
files_loaded=[],
seqsync=None,
pgsqlnodrop=False,
forgottables=False,
cleanfiles=False,
nopg=False,
updatemodules=False,
modules={},
)
parser.add_option(
"--onlyalone", help="Forbid rebuilds if other users are connected", dest="rebuildalone", action="store_true"
)
parser.add_option(
"--add-pkeys",
help="Try to add new primary keys if they're not on the dest database",
dest="addpkeys",
action="store_true",
)
parser.add_option(
"--index",
help="Drop indexes and create them again whenever the MTD file is processed",
dest="index",
action="store_true",
)
parser.add_option(
"--reindex",
help="Drop indexes and create them again whenever the MTD file is processed",
dest="reindex",
action="store_true",
)
parser.add_option(
"--loindex",
help="Disables most indexes used by Eneboo to enhance write speed",
dest="loindex",
action="store_true",
)
parser.add_option("--diskcopy", help="Create a backup .pydbabackup", dest="diskcopy", action="store_true")
parser.add_option("--getdiskcopy", help="Loads a .pydbabackup", dest="getdiskcopy")
parser.add_option(
"--addchecks",
help="Creates database checks (constraints, unique indexes)",
dest="addchecks",
action="store_true",
)
parser.add_option("--preparse", help="Checks and parses all MTD's", dest="preparse", action="store_true")
parser.add_option("--transactional", help="Use transactions inside PyDBA", dest="transactions", action="store_true")
parser.add_option("--cleanfiles", help="Purge old data on flfiles table", dest="cleanfiles", action="store_true")
parser.add_option("--debug", help="Tons of debug output", dest="debug", action="store_true")
parser.add_option(
"--safe", help="Enable safe mode. Disables table rebuild and psql load/drop.", dest="safe", action="store_true"
)
parser.add_option(
"--pg-nodrop", help="Disables dropping psql objects before load.", dest="pgsqlnodrop", action="store_true"
)
parser.add_option("--nopg", help="Disables creation/deletion of objects", dest="nopg", action="store_true")
parser.add_option("-v", help="Be more verbose", dest="verbose", action="store_true")
parser.add_option("-q", help="Quiet. Produce less output.", dest="quiet", action="store_true")
parser.add_option("-P", help="Parse QS Files using flscriptarser", dest="flscriptparser", action="store_true")
parser.add_option("--full", help="Deeper and slower checks", dest="full", action="store_true")
parser.add_option("--rebuildtables", help="DROP and CREATE tables again", dest="rebuildtables", action="store_true")
parser.add_option(
"--forgottables",
help="Update Metadata always and forgot what tables are pending a rebuild",
dest="forgottables",
action="store_true",
)
parser.add_option(
"--updatemodules", help="Update Modules doing a DELETE - INSERT", dest="updatemodules", action="store_true"
)
g_action = optparse.OptionGroup(parser, "Actions", "You MUST provide one of :")
# ******************* ACTIONS
g_action.add_option(
"-T", "--TEST", action="store_const", const="test_pydba", dest="action", help="Do some checks on PyDBA"
)
g_action.add_option("-l", "--lmod", action="store_const", const="load_module", dest="action", help="load modules")
g_action.add_option(
"-L", "--Lmod", action="store_const", const="load_module_sql", dest="action", help="load create SQL and modules"
)
g_action.add_option(
"-r", "--run", action="store_const", const="run_module", dest="action", help="load modules and run Eneboo"
)
g_action.add_option(
"-O",
"--olap",
action="store_const",
const="setup_olap",
dest="action",
help="setup olap tables (obsolete, use -Y)",
)
g_action.add_option(
"-Y", "--export-yaml", action="store_const", const="setup_olap", dest="action", help="export metadata as Yaml"
)
g_action.add_option(
"-m",
"--reload-mtd",
action="store_const",
const="reload_mtd",
dest="action",
help="Parses MTD files on DB and complete tables",
)
g_action.add_option(
"-R", "--repairdb", action="store_const", const="repair_db", dest="action", help="Execute tests to repair DB"
)
g_action.add_option(
"-D", "--dump", action="store_const", const="dump_db", dest="action", help="Dumps flfiles to disk"
)
g_action.add_option(
"--create",
"--createdb",
action="store_const",
const="create_db",
dest="action",
help="Create a new Database with basic fl* tables",
)
g_action.add_option(
"-c", "--check", action="store_const", const="check", dest="action", help="Check relations for the DB"
)
g_action.add_option(
"-M",
"--mysql2pgsql",
action="store_const",
const="mysql_convert",
dest="action",
help="Convert MySQL Database to PostgreSQL",
)
parser.add_option_group(g_action)
# ******************* CONFIG
g_options = optparse.OptionGroup(parser, "Options", "Optional database and host selection. Some actions use them")
g_options.add_option("--dhost", dest="dhost", help="Set the destination host")
g_options.add_option("--dport", dest="dport", help="Set the destination port")
g_options.add_option("--ddriver", dest="ddriver", help="Set the driver for dest DB (mysql; pgsql)")
g_options.add_option("--ddb", dest="ddb", help="Set DDB as destination Database")
g_options.add_option("--duser", dest="duser", help="Provide user for DB connection")
g_options.add_option("--dpasswd", dest="dpasswd", help="Provide password for DB connection")
g_options.add_option("--ohost", dest="ohost", help="Set the origin host")
g_options.add_option("--oport", dest="oport", help="Set the origin port")
g_options.add_option("--odriver", dest="odriver", help="Set the driver for origin DB (mysql; pgsql)")
g_options.add_option("--odb", dest="odb", help="Set DDB as origin Database")
g_options.add_option("--ouser", dest="ouser", help="Provide user for origin DB connection")
g_options.add_option("--opasswd", dest="opasswd", help="Provide password for origin DB connection")
g_options.add_option("--loaddir", dest="loaddir", help="Select Working Directory for Modules")
g_options.add_option("--loadbaselec", dest="loadbaselec", help="Import CSV File to Baselec table ('-' for stdin)")
g_options.add_option("--loadini", dest="loadini", help="load and execute INI file")
parser.add_option_group(g_options)
# parser.add_option("-f", "--file", dest="filename",
# help="write report to FILE", metavar="FILE")
# parser.add_option("-q", "--quiet",
# action="store_false", dest="verbose", default=True,
# help="don't print status messages to stdout")
for param in os.environ.keys():
if param[:5] == "PYDBA":
value = os.environ[param]
if param == "PYDBA_DHOST":
parser.set_defaults(dhost=value)
elif param == "PYDBA_DUSER":
parser.set_defaults(duser=value)
elif param == "PYDBA_DPASSWD":
parser.set_defaults(dpasswd=value)
elif param == "PYDBA_DPORT":
parser.set_defaults(dport=value)
else:
print "Unknown env var: %20s %s" % (param, value)
(options, args) = parser.parse_args()
if options.loadini:
exec_ini(options, options.loadini)
if options.ddriver and not options.odriver:
options.odriver = options.ddriver
if options.dhost and not options.ohost:
options.ohost = options.dhost
if options.duser and not options.ouser:
options.ouser = options.duser
if options.dpasswd and not options.opasswd:
options.opasswd = options.dpasswd
if options.ddb and not options.odb:
options.odb = options.ddb
if options.dport and not options.oport:
options.oport = options.dport
if options.diskcopy:
options.full = True
# options.rebuildtables = True
if options.safe:
if options.rebuildtables:
print u"WARN: Se solicitó rebuildtables, pero safemode está activo."
options.rebuildtables = False
if options.action == "setup_olap" or options.action == "check" or options.getdiskcopy or options.diskcopy:
options.preparse = True
if options.action == "none":
print "You must provide at least one action"
elif options.action == "run_module":
db = load_module(options, preparse=options.preparse)
repair_db(options, db)
try:
subprocess.call(
[
"eneboo",
"-silentconn",
":".join([options.ddb, options.duser, "PostgreSQL", options.dhost, options.dport, options.dpasswd]),
]
)
except KeyboardInterrupt, e:
print "<KeyboardInterrupt>"
elif (options.action == "run_module"):
db = load_module(options, preparse=options.preparse)
repair_db(options, db)
try:
subprocess.call([
"eneboo", "-silentconn", ":".join([
options.ddb, options.duser, "PostgreSQL", options.dhost,
options.dport, options.dpasswd
])
])
except KeyboardInterrupt, e:
print "<KeyboardInterrupt>"
elif (options.action == "load_module"):
db = load_module(options, preparse=options.preparse)
repair_db(options, db)
elif (options.action == "load_module_sql"):
db = create_sql(options)
load_module(options, db, preparse=options.preparse)
repair_db(options, db)
elif (options.action == "setup_olap"):
db = load_module(options, preparse=options.preparse)
olap = procesarOLAP(db)
olapfilename = "relationdata.yaml"
f1 = open(olapfilename, "w")
f1.write(olap)
f1.close()
print "Fichero %s guardado." % olapfilename
elif (options.action == "check"):
elif options.action == "run_module":
db = load_module(options, preparse=options.preparse)
repair_db(options, db)
try:
subprocess.call(
[
"eneboo",
"-silentconn",
":".join([options.ddb, options.duser, "PostgreSQL", options.dhost, options.dport, options.dpasswd]),
]
)
except KeyboardInterrupt, e:
print "<KeyboardInterrupt>"
elif options.action == "load_module":
db = load_module(options, preparse=options.preparse)
repair_db(options, db)
elif options.action == "load_module_sql":
db = create_sql(options)
load_module(options, db, preparse=options.preparse)
repair_db(options, db)
elif options.action == "setup_olap":
db = load_module(options, preparse=options.preparse)
olap = procesarOLAP(db)
olapfilename = "relationdata.yaml"
f1 = open(olapfilename, "w")
f1.write(olap)
f1.close()
print "Fichero %s guardado." % olapfilename
elif options.action == "check":
