def add_event_to_table(self, event_id):
"""
add the current pyhessio event to a row in the `self.events` table
"""
ts, tns = pyhessio.get_central_event_gps_time()
gpstime = Time(ts * u.s, tns * u.ns, format='gps', scale='utc')
if self._prev_gpstime is None:
self._prev_gpstime = gpstime
if self._current_starttime is None:
self._current_starttime = gpstime
relative_time = gpstime - self._current_starttime
delta_t = gpstime - self._prev_gpstime
self._prev_gpstime = gpstime
# build the trigger pattern as a fixed-length array
# (better for storage in FITS format)
trigtels = pyhessio.get_telescope_with_data_list()
self._current_trigpattern[:] = 0 # zero the trigger pattern
self._current_trigpattern[trigtels] = 1 # set the triggered tels to 1
# insert the row into the table
self.events.add_row((event_id, relative_time.sec, delta_t.sec,
len(trigtels),
self._current_trigpattern))
def add_event_to_table(self, event_id):
"""
add the current pyhessio event to a row in the `self.events` table
"""
ts, tns = pyhessio.get_central_event_gps_time()
gpstime = Time(ts * u.s, tns * u.ns, format='gps', scale='utc')
if self._prev_gpstime is None:
self._prev_gpstime = gpstime
if self._current_starttime is None:
self._current_starttime = gpstime
relative_time = gpstime - self._current_starttime
delta_t = gpstime - self._prev_gpstime
self._prev_gpstime = gpstime
# build the trigger pattern as a fixed-length array
# (better for storage in FITS format)
trigtels = pyhessio.get_telescope_with_data_list()
self._current_trigpattern[:] = 0 # zero the trigger pattern
self._current_trigpattern[trigtels] = 1 # set the triggered tels to 1
# insert the row into the table
self.events.add_row((event_id, relative_time.sec, delta_t.sec,
len(trigtels), self._current_trigpattern))
def main():
# get command-line arguments:
parser = argparse.ArgumentParser()
parser.add_argument('filename',
metavar='SIMTEL_FILE',
help='Input simtelarray file')
parser.add_argument('-o',
'--output',
metavar='FILENAME',
help=('output filename (e.g. times.fits), which '
'can be any format supported by astropy.table'),
default='times.fits.gz')
args = parser.parse_args()
# setup output table
events = Table(names=['EVENT_ID', 'T_REL', 'TRIGGERED_TELS'],
dtype=[np.int64, np.float64, np.uint8])
events['TRIGGERED_TELS'].shape = (0, MAX_TELS)
events['T_REL'].unit = u.s
events['T_REL'].description = 'Time relative to first event'
events.meta['INPUT'] = args.filename
trigpattern = np.zeros(MAX_TELS)
starttime = None
try:
pyhessio.file_open(args.filename)
for run_id, event_id in pyhessio.move_to_next_event():
ts, tns = pyhessio.get_central_event_gps_time()
gpstime = Time(ts * u.s, tns * u.ns, format='gps', scale='utc')
if starttime is None:
starttime = gpstime
reltime = (gpstime - starttime).sec
# build the trigger pattern as a fixed-length array
# (better for storage in FITS format)
trigtels = pyhessio.get_telescope_with_data_list()
trigpattern[:] = 0 # zero the trigger pattern
trigpattern[trigtels] = 1 # set the triggered telescopes to 1
events.add_row((event_id, reltime, trigpattern))
events.write(args.output)
print("Table written to '{}'".format(args.output))
print(events)
except Exception as err:
print("ERROR: {}, stopping".format(err))
finally:
pyhessio.close_file()
def main():
# get command-line arguments:
parser=argparse.ArgumentParser()
parser.add_argument('filename', metavar='SIMTEL_FILE',
help='Input simtelarray file')
parser.add_argument('-o','--output', metavar='FILENAME',
help=('output filename (e.g. times.fits), which '
'can be any format supported by astropy.table'),
default='times.fits.gz')
args = parser.parse_args()
# setup output table
events = Table(names=['EVENT_ID', 'T_REL', 'TRIGGERED_TELS'],
dtype=[np.int64, np.float64, np.uint8])
events['TRIGGERED_TELS'].shape = (0, MAX_TELS)
events['T_REL'].unit = u.s
events['T_REL'].description = 'Time relative to first event'
events.meta['INPUT'] = args.filename
trigpattern = np.zeros(MAX_TELS)
starttime = None
try:
pyhessio.file_open(args.filename)
for run_id, event_id in pyhessio.move_to_next_event():
ts, tns = pyhessio.get_central_event_gps_time()
gpstime = Time(ts*u.s, tns*u.ns, format='gps', scale='utc')
if starttime is None:
starttime = gpstime
reltime = (gpstime - starttime).sec
# build the trigger pattern as a fixed-length array
# (better for storage in FITS format)
trigtels = pyhessio.get_telescope_with_data_list()
trigpattern[:] = 0 # zero the trigger pattern
trigpattern[trigtels] = 1 # set the triggered telescopes to 1
events.add_row((event_id, reltime, trigpattern))
events.write(args.output)
print("Table written to '{}'".format(args.output))
print(events)
except Exception as err:
print("ERROR: {}, stopping".format(err))
finally:
pyhessio.close_file()
def hessio_event_source(url, max_events=None, allowed_tels=None):
"""A generator that streams data from an EventIO/HESSIO MC data file
(e.g. a standard CTA data file.)
Parameters
----------
url : str
path to file to open
max_events : int, optional
maximum number of events to read
allowed_tels : list[int]
select only a subset of telescope, if None, all are read. This can
be used for example emulate the final CTA data format, where there
would be 1 telescope per file (whereas in current monte-carlo,
they are all interleaved into one file)
"""
ret = pyhessio.file_open(url)
if ret is not 0:
raise RuntimeError("hessio_event_source failed to open '{}'"
.format(url))
counter = 0
eventstream = pyhessio.move_to_next_event()
if allowed_tels is not None:
allowed_tels = set(allowed_tels)
container = Container("hessio_container")
container.meta.add_item('hessio__input', url)
container.meta.add_item('hessio__max_events', max_events)
container.meta.add_item('pixel_pos', dict())
container.meta.add_item('optical_foclen', dict())
container.add_item("dl0", RawData())
container.add_item("mc", MCEvent())
container.add_item("trig", CentralTriggerData())
container.add_item("count")
for run_id, event_id in eventstream:
container.dl0.run_id = run_id
container.dl0.event_id = event_id
container.dl0.tels_with_data = set(pyhessio.get_teldata_list())
# handle telescope filtering by taking the intersection of
# tels_with_data and allowed_tels
if allowed_tels is not None:
selected = container.dl0.tels_with_data & allowed_tels
if len(selected) == 0:
continue # skip event
container.dl0.tels_with_data = selected
container.trig.tels_with_trigger \
= pyhessio.get_central_event_teltrg_list()
time_s, time_ns = pyhessio.get_central_event_gps_time()
container.trig.gps_time = Time(time_s * u.s, time_ns * u.ns,
format='gps', scale='utc')
container.mc.energy = pyhessio.get_mc_shower_energy() * u.TeV
container.mc.alt = Angle(pyhessio.get_mc_shower_altitude(), u.rad)
container.mc.az = Angle(pyhessio.get_mc_shower_azimuth(), u.rad)
container.mc.core_x = pyhessio.get_mc_event_xcore() * u.m
container.mc.core_y = pyhessio.get_mc_event_ycore() * u.m
container.count = counter
# this should be done in a nicer way to not re-allocate the
# data each time (right now it's just deleted and garbage
# collected)
container.dl0.tel = dict() # clear the previous telescopes
for tel_id in container.dl0.tels_with_data:
# fill pixel position dictionary, if not already done:
if tel_id not in container.meta.pixel_pos:
container.meta.pixel_pos[tel_id] \
= pyhessio.get_pixel_position(tel_id) * u.m
container.meta.optical_foclen[tel_id] = pyhessio.get_optical_foclen(tel_id) * u.m;
# fill the photo electrons list
if tel_id not in container.mc.photo_electrons:
container.mc.photo_electrons[tel_id] = dict()
for pix_id in range(pyhessio.get_num_pixels(tel_id)):
container.mc.photo_electrons[tel_id][pix_id] = pyhessio.get_mc_number_photon_electron(tel_id, pix_id)[0]
nchans = pyhessio.get_num_channel(tel_id)
container.dl0.tel[tel_id] = RawCameraData(tel_id)
container.dl0.tel[tel_id].num_channels = nchans
# load the data per telescope/chan
for chan in range(nchans):
container.dl0.tel[tel_id].adc_samples[chan] \
= pyhessio.get_adc_sample(channel=chan,
telescope_id=tel_id)
container.dl0.tel[tel_id].adc_sums[chan] \
= pyhessio.get_adc_sum(channel=chan,
telescope_id=tel_id)
yield container
counter += 1
if max_events is not None and counter > max_events:
return
'telheight': height, 'Npix': numpix, 'mirarea': mirarea,
'mirradii': mirradii, 'holeradii': holeradii,
'secondmirradii': mir2radii,
'secondholeradii': hole2radii}
print(teloptconfigdict)
impact = list()
geom = 0
for event in source:
container.dl0.tels_with_data = set(pyhessio.get_teldata_list())
container.trig.tels_with_trigger \
= pyhessio.get_central_event_teltrg_list()
time_s, time_ns = pyhessio.get_central_event_gps_time()
container.trig.gps_time = Time(time_s * u.s, time_ns * u.ns,
format='gps', scale='utc')
container.mc.energy = pyhessio.get_mc_shower_energy() * u.TeV
container.mc.alt = Angle(pyhessio.get_mc_shower_altitude(), u.rad)
container.mc.az = Angle(pyhessio.get_mc_shower_azimuth(), u.rad)
container.mc.core_x = pyhessio.get_mc_event_xcore() * u.m
container.mc.core_y = pyhessio.get_mc_event_ycore() * u.m
# this should be done in a nicer way to not re-allocate the
# data each time (right now it's just deleted and garbage
# collected)
container.dl0.tel = dict() # clear the previous telescopes
table = "CameraTable_VersionFeb2016_TelID"
def hessio_event_source(url, max_events=None, allowed_tels=None):
"""A generator that streams data from an EventIO/HESSIO MC data file
(e.g. a standard CTA data file.)
Parameters
----------
url : str
path to file to open
max_events : int, optional
maximum number of events to read
allowed_tels : list[int]
select only a subset of telescope, if None, all are read. This can
be used for example emulate the final CTA data format, where there
would be 1 telescope per file (whereas in current monte-carlo,
they are all interleaved into one file)
"""
ret = pyhessio.file_open(url)
if ret is not 0:
raise RuntimeError("hessio_event_source failed to open '{}'"
.format(url))
# the container is initialized once, and data is replaced within
# it after each yield
counter = 0
eventstream = pyhessio.move_to_next_event()
if allowed_tels is not None:
allowed_tels = set(allowed_tels)
event = EventContainer()
event.meta.source = "hessio"
# some hessio_event_source specific parameters
event.meta.add_item('hessio__input', url)
event.meta.add_item('hessio__max_events', max_events)
for run_id, event_id in eventstream:
event.dl0.run_id = run_id
event.dl0.event_id = event_id
event.dl0.tels_with_data = set(pyhessio.get_teldata_list())
# handle telescope filtering by taking the intersection of
# tels_with_data and allowed_tels
if allowed_tels is not None:
selected = event.dl0.tels_with_data & allowed_tels
if len(selected) == 0:
continue # skip event
event.dl0.tels_with_data = selected
event.trig.tels_with_trigger \
= pyhessio.get_central_event_teltrg_list()
time_s, time_ns = pyhessio.get_central_event_gps_time()
event.trig.gps_time = Time(time_s * u.s, time_ns * u.ns,
format='gps', scale='utc')
event.mc.energy = pyhessio.get_mc_shower_energy() * u.TeV
event.mc.alt = Angle(pyhessio.get_mc_shower_altitude(), u.rad)
event.mc.az = Angle(pyhessio.get_mc_shower_azimuth(), u.rad)
event.mc.core_x = pyhessio.get_mc_event_xcore() * u.m
event.mc.core_y = pyhessio.get_mc_event_ycore() * u.m
event.mc.h_first_int = pyhessio.get_mc_shower_h_first_int() * u.m
event.count = counter
# this should be done in a nicer way to not re-allocate the
# data each time (right now it's just deleted and garbage
# collected)
event.dl0.tel = dict() # clear the previous telescopes
event.mc.tel = dict() # clear the previous telescopes
for tel_id in event.dl0.tels_with_data:
# fill pixel position dictionary, if not already done:
if tel_id not in event.meta.pixel_pos:
event.meta.pixel_pos[tel_id] \
= pyhessio.get_pixel_position(tel_id) * u.m
event.meta.optical_foclen[
tel_id] = pyhessio.get_optical_foclen(tel_id) * u.m
# fill telescope position dictionary, if not already done:
if tel_id not in event.meta.tel_pos:
event.meta.tel_pos[
tel_id] = pyhessio.get_telescope_position(tel_id) * u.m
nchans = pyhessio.get_num_channel(tel_id)
npix = pyhessio.get_num_pixels(tel_id)
nsamples = pyhessio.get_num_samples(tel_id)
event.dl0.tel[tel_id] = RawCameraData(tel_id)
event.dl0.tel[tel_id].num_channels = nchans
event.dl0.tel[tel_id].num_pixels = npix
event.dl0.tel[tel_id].num_samples = nsamples
event.mc.tel[tel_id] = MCCamera(tel_id)
event.dl0.tel[tel_id].calibration \
= pyhessio.get_calibration(tel_id)
event.dl0.tel[tel_id].pedestal \
= pyhessio.get_pedestal(tel_id)
# load the data per telescope/chan
for chan in range(nchans):
event.dl0.tel[tel_id].adc_samples[chan] \
= pyhessio.get_adc_sample(channel=chan,
telescope_id=tel_id)
event.dl0.tel[tel_id].adc_sums[chan] \
= pyhessio.get_adc_sum(channel=chan,
telescope_id=tel_id)
event.mc.tel[tel_id].refshapes[chan] = \
pyhessio.get_ref_shapes(tel_id, chan)
# load the data per telescope/pixel
event.mc.tel[tel_id].photo_electrons \
= pyhessio.get_mc_number_photon_electron(telescope_id=tel_id)
event.mc.tel[tel_id].refstep = pyhessio.get_ref_step(tel_id)
event.mc.tel[tel_id].lrefshape = pyhessio.get_lrefshape(tel_id)
event.mc.tel[tel_id].time_slice = \
pyhessio.get_time_slice(tel_id)
yield event
counter += 1
if max_events is not None and counter >= max_events:
return
efficiency = list()
efficiency.append(list())
efficiency.append(list())
efficiency.append(list())
efficiency.append(list())
impact = list()
geom = 0
for event in source:
container.dl0.tels_with_data = set(pyhessio.get_teldata_list())
container.trig.tels_with_trigger \
= pyhessio.get_central_event_teltrg_list()
time_s, time_ns = pyhessio.get_central_event_gps_time()
container.trig.gps_time = Time(time_s * u.s, time_ns * u.ns,
format='gps', scale='utc')
container.mc.energy = pyhessio.get_mc_shower_energy() * u.TeV
container.mc.alt = Angle(pyhessio.get_mc_shower_altitude(), u.rad)
container.mc.az = Angle(pyhessio.get_mc_shower_azimuth(), u.rad)
container.mc.core_x = pyhessio.get_mc_event_xcore() * u.m
container.mc.core_y = pyhessio.get_mc_event_ycore() * u.m
# this should be done in a nicer way to not re-allocate the
# data each time (right now it's just deleted and garbage
# collected)
container.dl0.tel = dict() # clear the previous telescopes
table = "CameraTable_VersionFeb2016_TelID"
def hessio_event_source(url, max_events=None, allowed_tels=None):
"""A generator that streams data from an EventIO/HESSIO MC data file
(e.g. a standard CTA data file.)
Parameters
----------
url : str
path to file to open
max_events : int, optional
maximum number of events to read
allowed_tels : list[int]
select only a subset of telescope, if None, all are read. This can
be used for example emulate the final CTA data format, where there
would be 1 telescope per file (whereas in current monte-carlo,
they are all interleaved into one file)
"""
ret = pyhessio.file_open(url)
if ret is not 0:
raise RuntimeError(
"hessio_event_source failed to open '{}'".format(url))
counter = 0
eventstream = pyhessio.move_to_next_event()
if allowed_tels is not None:
allowed_tels = set(allowed_tels)
container = Container("hessio_container")
container.meta.add_item('hessio__input', url)
container.meta.add_item('hessio__max_events', max_events)
container.meta.add_item('pixel_pos', dict())
container.meta.add_item('optical_foclen', dict())
container.add_item("dl0", RawData())
container.add_item("mc", MCShowerData())
container.add_item("trig", CentralTriggerData())
container.add_item("count")
for run_id, event_id in eventstream:
container.dl0.run_id = run_id
container.dl0.event_id = event_id
container.dl0.tels_with_data = set(pyhessio.get_teldata_list())
# handle telescope filtering by taking the intersection of
# tels_with_data and allowed_tels
if allowed_tels is not None:
selected = container.dl0.tels_with_data & allowed_tels
if len(selected) == 0:
continue # skip event
container.dl0.tels_with_data = selected
container.trig.tels_with_trigger \
= pyhessio.get_central_event_teltrg_list()
time_s, time_ns = pyhessio.get_central_event_gps_time()
container.trig.gps_time = Time(time_s * u.s,
time_ns * u.ns,
format='gps',
scale='utc')
container.mc.energy = pyhessio.get_mc_shower_energy() * u.TeV
container.mc.alt = Angle(pyhessio.get_mc_shower_altitude(), u.rad)
container.mc.az = Angle(pyhessio.get_mc_shower_azimuth(), u.rad)
container.mc.core_x = pyhessio.get_mc_event_xcore() * u.m
container.mc.core_y = pyhessio.get_mc_event_ycore() * u.m
container.count = counter
# this should be done in a nicer way to not re-allocate the
# data each time (right now it's just deleted and garbage
# collected)
container.dl0.tel = dict() # clear the previous telescopes
for tel_id in container.dl0.tels_with_data:
# fill pixel position dictionary, if not already done:
if tel_id not in container.meta.pixel_pos:
container.meta.pixel_pos[tel_id] \
= pyhessio.get_pixel_position(tel_id) * u.m
container.meta.optical_foclen[
tel_id] = pyhessio.get_optical_foclen(tel_id) * u.m
nchans = pyhessio.get_num_channel(tel_id)
container.dl0.tel[tel_id] = RawCameraData(tel_id)
container.dl0.tel[tel_id].num_channels = nchans
# load the data per telescope/chan
for chan in range(nchans):
container.dl0.tel[tel_id].adc_samples[chan] \
= pyhessio.get_adc_sample(channel=chan,
telescope_id=tel_id)
container.dl0.tel[tel_id].adc_sums[chan] \
= pyhessio.get_adc_sum(channel=chan,
telescope_id=tel_id)
yield container
counter += 1
if max_events is not None and counter > max_events:
return
