def setup():
GPIO.setmode(GPIO.BCM) # Numbers GPIOs by physical location
GPIO.setup(IrPin, GPIO.IN, pull_up_down=GPIO.PUD_UP)
GPIO.setwarnings(False)
os.system("python2 lcd1602.py 0")
pylirc.init("pylirc", "./conf", blocking)
def run(self):
GPIO.setmode(GPIO.BCM)
#pylirc.init("pylirc","./irc_conf",blocking)
pylirc.init("pylirc", "./irc_conf")
allow = pylirc.blocking(0)
while True:
time.sleep(1)
s = pylirc.nextcode()
while (s):
time.sleep(1)
for (code) in s:
#print 'Command: ',code["config"]
print 'CommandS: ', s
lirchar = s[0]
print 'Command1:', lirchar
self._char = lirchar
if self._char == self._quitKey:
pylirc.exit()
print "QUIT!"
return
if self._char in self._handlersMap:
self._handlersMap[self._char]()
if (not blocking):
s = pylirc.nextcode()
else:
s = []
def resume(self):
"""
(re-)initialize pylirc, e.g. after calling close()
"""
_debug_('Lirc.resume()', 2)
pylirc.init('freevo', config.LIRCRC)
pylirc.blocking(0)
def main():
signal.signal(signal.SIGINT, signal_handler)
signal.signal(signal.SIGTERM, signal_handler)
pylirc.init("front-panel-interface", "/etc/front-panel/pylirc.conf",
0) # non-blocking
ip = commands.getoutput("/sbin/ifconfig").split("\n")[1].split()[1][5:]
# use P1 header pin numbering convention
GPIO.setmode(GPIO.BOARD)
panel = FrontPanel.FrontPanel()
panel.turn_on()
while True:
panel.check_for_input()
# panel.display_text(ip, 1, 0)
panel.display_clock()
panel.display_respource_usage()
panel.display_song()
time.sleep(0.1)
def main():
lirc.init("radio")
while 1:
ir_codes = lirc.nextcode()
if ir_codes != None:
print(ir_codes)
time.sleep(0.1)
def setup():
GPIO.setmode(GPIO.BOARD)
#GPIO.setmode(GPIO.BCM)
GPIO.setup(7, GPIO.OUT)
GPIO.setup(11, GPIO.OUT)
GPIO.setup(22, GPIO.OUT)
GPIO.output(22, GPIO.LOW)
pylirc.init("pylirc", "./conf", blocking)
def main():
lirc.init("radio")
while 1:
ir_codes = lirc.nextcode()
if ir_codes != None:
print(ir_codes)
time.sleep(0.1)
def start():
try:
pylirc.init('freevo', config.LIRCRC)
pylirc.blocking(1)
except RuntimeError:
print 'WARNING: Could not initialize PyLirc!'
sys.exit(0)
except IOError:
print 'WARNING: %s not found!' % config.LIRCRC
sys.exit(0)
def start():
try:
pylirc.init('freevo', config.LIRCRC)
pylirc.blocking(1)
except RuntimeError:
print 'WARNING: Could not initialize PyLirc!'
sys.exit(0)
except IOError:
print 'WARNING: %s not found!' % config.LIRCRC
sys.exit(0)
def setup(self):
try:
# open lirc
pylirc.init("pylirc",os.path.dirname(__file__) + "/" + "../python_modules/" + "keys.conf",0)
except Exception:
import traceback
print traceback.format_exc()
sys.exit(1)
self.connectClient()
def activate(self):
"""
Activate the infrared sensor.
"""
super(Infrared_Sensor, self).activate()
self._active = True
configuration_file = "{}/remotes/{}.lircrc".format(self._base_path, self._remote)
pylirc.init(self._program, configuration_file, False)
thread.start_new_thread(self._loop, ())
def __init__(self, app, config):
conffile = config['configuration']
name = config['name']
if conffile:
self._lirc = pylirc.init(name, conffile)
else:
self._lirc = pylirc.init(name)
if not self._lirc:
raise LircError('Cannot init pylirc')
def __init__(self):
self.events = []
self.lastkey = False
self.lasttime = time.time()
global LIRC
if LIRC:
try:
LIRC.init('pypilot')
self.lirctime = False
except:
print('failed to initialize lirc. is .lircrc missing?')
LIRC = None
def startReading(self):
if self._fd != -1:
try:
os.fstat(self.fileno())
abstract.FileDescriptor.startReading(self)
return
except OSError:
pass
if self._lirc_config is not None:
self._fd = pylirc.init(self._program_name, self._lirc_config)
else:
self._fd = pylirc.init(self._program_name)
pylirc.blocking(0)
self.protocol.connectionMade()
abstract.FileDescriptor.startReading(self)
def setup():
global p_R, p_G, p_B
GPIO.setmode(GPIO.BCM)
GPIO.setup(Rpin, GPIO.OUT)
GPIO.setup(Gpin, GPIO.OUT)
GPIO.setup(Bpin, GPIO.OUT)
p_R = GPIO.PWM(Rpin, 2000) # Set Frequece to 2KHz
p_G = GPIO.PWM(Gpin, 2000)
p_B = GPIO.PWM(Bpin, 2000)
p_R.start(100)
p_G.start(100)
p_B.start(100)
pylirc.init("pylirc", "./conf", blocking)
def setup():
global p_R, p_G, p_B
GPIO.setmode(GPIO.BCM)
GPIO.setup(Rpin, GPIO.OUT)
GPIO.setup(Gpin, GPIO.OUT)
GPIO.setup(Bpin, GPIO.OUT)
p_R = GPIO.PWM(Rpin, 2000) # Set Frequece to 2KHz
p_G = GPIO.PWM(Gpin, 2000)
p_B = GPIO.PWM(Bpin, 2000)
p_R.start(100)
p_G.start(100)
p_B.start(100)
pylirc.init("pylirc", "./conf", blocking)
def startRemoteControll(self, dataQueue):
dataQueue.put(['pid', getpid()])
try:
if(pylirc.init('mediacatalog', self.config, self.blocking)):
self.configuration.getLogger().info('Remote control process was started')
dataQueue.put(['status', 0])
code = ""
isTerminate = False
DEVNULL = open(os.devnull, 'w')
while not isTerminate:
codesList = pylirc.nextcode(1)
out = subprocess.Popen(['/bin/sh', '-c', 'ps -ae | grep `xdotool getwindowfocus getwindowpid` | grep mediacatalog.py'], stdout=subprocess.PIPE)
isHasFocus = out.communicate()[0].rstrip()
if (isHasFocus != ""):
self.configuration.getLogger().debug('Application has focus')
if(codesList):
for code in codesList:
self.configuration.getLogger().info('Command: %s, Repeat: %d' % (code['config'], code['repeat']))
if code['config'] != None:
if code['repeat'] > 1:
for i in range(code['repeat']-1):
xmacroProc = subprocess.Popen(['xmacroplay', ':0.0'], stdin=subprocess.PIPE, stdout=DEVNULL, stderr=subprocess.STDOUT)
xmacroProc.communicate('KeyStrPress ' + code['config'] + ' KeyStrRelease ' + code['config'])
else:
xmacroProc = subprocess.Popen(['xmacroplay', ':0.0'], stdin=subprocess.PIPE, stdout=DEVNULL, stderr=subprocess.STDOUT)
xmacroProc.communicate('KeyStrPress ' + code['config'] + ' KeyStrRelease ' + code['config'])
else:
self.configuration.getLogger().debug('Application has not focus')
except RuntimeError:
dataQueue.put(['status', 1])
self.configuration.getLogger().error('Remote control not initialized')
self.configuration.getLogger().error(sys.exc_info()[1])
def __init__(self, config, notifier):
if not pylirc:
return
self.notifier = notifier
rc_file = config.get("lirc", "keymap")
self.socket = pylirc.init('radioplayer', rc_file)
def startPyLirc(self):
if(pylirc.init(LIRC_PROG_NAME, self.configFile, 0)):
while(self.frontendActive):
s = pylirc.nextcode(1)
self.handleNextCode(s)
sleep(0.1)
pylirc.exit()
def __init__(self, dest, name, config):
self.dest = dest
sock = pylirc.init(name, config)
pylirc.blocking(False)
super(client, self).__init__(sock, Qt.QSocketNotifier.Read, dest)
self.setEnabled(True)
self.activated.connect(self.read_nextcode)
def run(self):
try:
global lastInput
global stopThreads
if (pylirc.init("lircidle", "/home/myth/scripts/lircrc_lircidle",
0) == 0):
syslog.syslog('lircidle.py: unable to init lirc')
print('lircidle.py: unable to init lirc')
sys.exit(1)
while 1:
time.sleep(1)
c = pylirc.nextcode()
if c is not None:
#for (code) in c:
# syslog.syslog('lircidle.py (debug): code received (' + str(code["config"]) + ')')
# print('lircidle.py (debug): code received (' + str(code["config"]) + ')')
lastInput = time.time()
if stopThreads != 0: break
except:
syslog.syslog('lircidle.py: unexpected exception: ' +
str(sys.exc_info()))
print('lircidle.py: unexpected exception: ' + str(sys.exc_info()))
finally:
pylirc.exit()
syslog.syslog('lircidle.py: exiting lirc thread')
print('lircidle.py: exiting lirc thread')
def work(self):
blocking = 0
run = 1
try:
if pylirc.init(self.prog, self.tempFile.name):
while run:
if not blocking:
self.plugin.workerLock.acquire()
run = self.plugin.workerRunning
self.plugin.workerLock.release()
if run:
time.sleep(0.5)
else:
break
s = pylirc.nextcode(1)
blocking = 0
while s:
for code in s:
self.plugin.send_ir_command(code["config"])
blocking = 1
s = []
except RuntimeError as e:
self.logger.warning('LIRC Plugin could not be loaded. Retrying in 5 seconds. %s' % e)
pylirc.exit()
time.sleep(5)
self.work()
def init(appname = None, cfg = None):
"""
Init pylirc and connect to the mainloop.
"""
global _dispatcher
if _dispatcher:
# already running
return False
if not pylirc:
# not installed
return False
if cfg == None:
cfg = os.path.expanduser("~/.lircrc")
if appname == None:
appname = "kaa"
try:
fd = pylirc.init(appname, cfg)
except IOError:
# something went wrong
return False
if not fd:
# something went wrong
return False
pylirc.blocking(0)
_dispatcher = kaa.IOMonitor(_handle_lirc_input)
_dispatcher.register(fd)
kaa.main.signals["shutdown"].connect(stop)
return True
def browser(args):
browser = subprocess.Popen(["/usr/local/bin/mozilla-firefox/firefox"] + args[1:])
time.sleep(5)
p1 = subprocess.Popen(["xdotool", "search", "--name", "Mozilla Firefox"], stdout = subprocess.PIPE)
p1.wait()
windows = p1.stdout.readline().split()
for window in windows:
print "'%s'" % window
subprocess.Popen(["xdotool", "windowfocus", str(window)])
subprocess.Popen(["xdotool", "key", "F11"])
try:
if not pylirc.init("mozilla-firefox", "/etc/lirc/lircrc", 1):
return "Failed"
stop = False
while not stop:
codes = pylirc.nextcode(1)
if codes is None:
continue
for code in codes:
print code
if code is None:
continue
config = code["config"].split()
if config[0] == "EXIT":
stop = True
break
if config[0] == "mousestepreset":
mousestep = 0
elif config[0] == "mousemove_relative":
if mousestep < 10:
mousestep += 1
config[2] = str(int(config[2]) * mousestep ** 2)
config[3] = str(int(config[3]) * mousestep ** 2)
subprocess.Popen(["xdotool"] + config)
except KeyboardInterrupt:
print "Exiting...."
p1 = subprocess.Popen(["xdotool", "search", "--name", "Mozilla Firefox"], stdout = subprocess.PIPE)
p1.wait()
windows = p1.stdout.readline().split()
for window in windows:
print "'%s'" % window
subprocess.Popen(["xdotool", "windowfocus", str(window)])
subprocess.Popen(["xdotool", "key", "Ctrl+Shift+W"])
# If we found windows and they're still running, wait 3 seconds
if len(windows) != 0 and browser.poll() is None:
for i in range(30):
time.sleep(.1)
if browser.poll() is not None:
break
# Okay now we can forcibly kill browser
if browser.poll() is None:
browser.terminate()
return 0
def resume(self):
"""
(re-)initialize pylirc, e.g. after calling close()
"""
logger.log(9, 'Lirc.resume()')
fd = pylirc.init('freevo', config.LIRCRC)
self.dispatcher = kaa.IOMonitor(self._handle_lirc_input)
self.dispatcher.register(fd)
def resume(self):
"""
(re-)initialize pylirc, e.g. after calling close()
"""
logger.log( 9, 'Lirc.resume()')
fd = pylirc.init('freevo', config.LIRCRC)
self.dispatcher = kaa.IOMonitor(self._handle_lirc_input)
self.dispatcher.register(fd)
def __init__(self):
config = ConfigParser.SafeConfigParser()
config.read('example.cfg')
try:
lirc_socket = pylirc.init("yavdr-dock")
gobject.io_add_watch(lirc_socket, gobject.IO_IN, self.lirc_handler)
except:
syslog.syslog("LIRC initialization error!")
# create the main window, and attach delete_event signal to terminating
# the application
self.window = gtk.Window(gtk.WINDOW_TOPLEVEL)
self.window.set_position(gtk.WIN_POS_CENTER_ALWAYS)
color = gtk.gdk.color_parse('#000000')
self.window.modify_bg(gtk.STATE_NORMAL, color)
self.window.set_border_width(0)
self.window.set_has_frame(False)
self.window.set_type_hint(gtk.gdk.WINDOW_TYPE_HINT_SPLASHSCREEN)
self.window.set_decorated(False)
self.window.show()
# a horizontal box to hold the buttons
self.hbox = gtk.HBox()
self.hbox.show()
self.window.add(self.hbox)
focus_is_not_set = True
for section in config.sections():
# create several images with data from files and load images into
# buttons
image = gtk.Image()
image.set_from_file(config.get(section, 'Image'))
image.show()
# a button to contain the image widget
bgcolor = gtk.gdk.color_parse('#020507')
fgcolor = gtk.gdk.color_parse('#004466')
accolor = gtk.gdk.color_parse('#FFFFFF')
self.button = gtk.Button()
style = self.button.get_style().copy()
style.bg[gtk.STATE_NORMAL] = bgcolor
style.bg[gtk.STATE_SELECTED] = accolor
style.bg[gtk.STATE_ACTIVE] = accolor
style.bg[gtk.STATE_PRELIGHT] = fgcolor
#set the button's style to the one you created
self.button.set_style(style)
self.button.props.relief = gtk.RELIEF_NONE
self.button.add(image)
self.button.show()
self.hbox.pack_start(self.button)
self.button.connect("clicked", self.button_clicked, config.get(section, 'Exec'))
if focus_is_not_set:
self.button.grab_focus()
focus_is_not_set = False
def __init__(self, poll):
thisdir = os.path.dirname(__file__)
config = os.path.join(thisdir, "lirc.rc")
self._fd = pylirc.init("headless-home-music", config, False)
if self._fd == 0:
raise RuntimeError("pylirc failed to initialized")
poll.add_fd(self._fd, select.POLLIN | select.POLLHUP, self._cb)
self._poller = poll
def __init__(self, fullscreen = True, size = None):
"""
Screen.__init__([fullscreen [,size]]) -- initialize screen
Starts up the display screen, optionally in window and mode with
specified size.
"""
checkpoint('first')
pygame.font.init()
pygame.display.init()
pygame.event.set_allowed(None)
pygame.event.set_allowed((pygame.QUIT, pygame.KEYDOWN))
pygame.event.set_grab(False)
pygame.mouse.set_visible(False)
self.fullscreen = fullscreen
if size:
self.rsize = size
else:
self.rsize = pygame.display.list_modes()[0] if fullscreen else (800, 600)
# TODO: generalize detection of dualhead configs
if self.rsize == (2704, 1050):
self.size = (1680, 1050)
else:
self.size = self.rsize
checkpoint('pygame init')
self.fonts = [
{'name': 'arialbd', 'size': self.size[0]/24},
{'name': 'arial', 'size': self.size[0]/33},
{'name': 'arial', 'size': self.size[0]/47},
]
self.load_fonts()
self.load_shapes()
self.deactivate_screensaver()
if not hasattr(self, 'lircsock') and 'pylirc' in sys.modules:
self.lircsock = pylirc.init('cmus-fullscreen')
pygame.display.set_caption('cmus fullscreen interface')
# TODO: set window icon?
self.screen = pygame.display.set_mode(self.rsize, \
pygame.FULLSCREEN if fullscreen else 0)
checkpoint('window')
self.back = self.draw_background()
# TODO: only make browsurf as big as needed
self.browsurf = Surface(self.size, pygame.SRCALPHA)
self.surf = Surface(self.size, pygame.SRCALPHA)
try:
self.st = cmus.Status()
except:
# TODO: print this onscreen and retry
raise Exception('cmus not started')
self.start_thread()
self.first = True
def start_main_loop(self):
"""
Read lirc config file and start main pylirc main loop.
"""
if pylirc.init("tvtuner", "~/.lircrc", False):
try:
self._lirc_main_loop()
except KeyboardInterrupt:
self._osd.hide()
pylirc.exit()
del self._osd
logging.debug('Exiting..')
def start_main_loop(self):
"""
Read lirc config file and start main pylirc main loop.
"""
if pylirc.init("tvtuner", "~/.lircrc", False):
try:
self._lirc_main_loop()
except KeyboardInterrupt:
self._osd.hide()
pylirc.exit()
del self._osd
logging.debug('Exiting..')
def __init__(self):
threading.Thread.__init__(self)
self.lock = threading.Lock()
self.daemon = True
self.MAIN_THREAD_DELAY = 0.01
self.lircConnected = True
try:
self.sockid = pylirc.init("myamp", "/root/.lircrc")
pylirc.blocking(0)
except:
print "error connecting to lircd!"
self.lircConnected = False
self.code = None
def runPylirc(configuration):
if pylirc is None:
logger.debug('Not initializing pylirc')
yield
return
logger.debug('Initializing pylirc with configuration: ' + configuration)
fd = pylirc.init('browser', configuration)
if not fd:
raise RuntimeError('Failed to initialize pylirc')
try:
yield fd
finally:
pylirc.exit()
def __init__(self, name = "irUI"):
self.pub_btn = rospy.Publisher('/arom/UI/buttons', String, queue_size=10)
self.pub_beep = rospy.Publisher('/beeper/preset', String, queue_size=5)
rospy.init_node('irUI')
self.set_feature('remoteCtrl',{'type': "odroid"})
blocking = 0;
rate = rospy.Rate(10)
pylirc.init("pylirc", "/home/odroid/robozor/station/irConf.conf", blocking)
while not rospy.is_shutdown():
try:
s = pylirc.nextcode(1)
if s:
rospy.loginfo(s[0]['config'])
self.pub_btn.publish(s[0]['config'])
self.pub_beep.publish('btn')
s = []
except Exception, e:
rospy.logerr(e)
rate.sleep()
def ir_codes():
global read_ir_key_val
GPIO.setup(26, GPIO.IN)
pylirc.init("my_lirc", ir_conf_path, 0)
ir_codes = pylirc.nextcode(1)
# while with time out
timeout_start = time.time()
while True:
ir_codes = pylirc.nextcode(1)
if ir_codes != None:
conf_key = ir_codes[0]['config']
#print("ircodes = %s"%ir_codes)
#print(type(conf_key))
pylirc.exit()
read_ir_key_val = conf_key
return conf_key
elif (time.time() - timeout_start > ir_time_out):
pylirc.exit()
read_ir_key_val = None
print "time out"
return -1
time.sleep(0.05)
def runPylirc(configuration):
if pylirc is None:
logger.debug('Not initializing pylirc')
yield
return
logger.debug('Initializing pylirc with configuration: ' + configuration)
fd = pylirc.init('browser', configuration)
if not fd:
raise RuntimeError('Failed to initialize pylirc')
try:
yield fd
finally:
pylirc.exit()
def __init__(self):
threading.Thread.__init__(self)
self.lock = threading.Lock()
self.daemon = True
self.MAIN_THREAD_DELAY = 0.01
self.lircConnected = True
try:
self.sockid = pylirc.init("myamp", "/root/.lircrc")
pylirc.blocking(0)
except:
print "error connecting to lircd!"
self.lircConnected = False
self.code = None
def ffox(args):
ffox = subprocess.Popen(["/usr/bin/firefox"] + args[1:])
try:
if not pylirc.init("firefox", "~/.lircrc", 1):
return "Failed"
stop = False
while not stop:
codes = pylirc.nextcode(1)
if codes is None:
continue
for code in codes:
#print code
if code is None:
continue
config = code["config"].split()
if config[0] == "EXIT":
stop = True
break
if config[0] == "mousestepreset":
mousestep = 0
elif config[0] == "mousemove_relative":
if mousestep < 10:
mousestep += 1
config[2] = str(int(config[2]) * mousestep ** 2)
config[3] = str(int(config[3]) * mousestep ** 2)
subprocess.Popen(["xdotool"] + config)
except KeyboardInterrupt:
print "Exiting...."
p1 = subprocess.Popen(["xdotool", "search", "--title", "Mozilla Firefox"], stdout = subprocess.PIPE)
p1.wait()
windows = p1.stdout.readline().split()
for window in windows:
#print "'%s'" % window
subprocess.Popen(["xdotool", "windowfocus", str(window)])
subprocess.Popen(["xdotool", "key", "ctrl+q"])
# If we found windows and they're still running, wait 3 seconds
if len(windows) != 0 and ffox.poll() is None:
for i in range(30):
time.sleep(.1)
if ffox.poll() is not None:
break
# Okay now we can forcibly kill it
if ffox.poll() is None:
ffox.terminate()
return 0
def setup():
global p_R, p_G, p_B
GPIO.setmode(GPIO.BCM)
GPIO.setup(Rpin, GPIO.OUT)
GPIO.setup(Gpin, GPIO.OUT)
GPIO.setup(Bpin, GPIO.OUT)
p_R = GPIO.PWM(Rpin, 2000) # Set Frequece to 2KHz
p_G = GPIO.PWM(Gpin, 2000)
p_B = GPIO.PWM(Bpin, 2000)
p_R.start(100)
p_G.start(100)
p_B.start(100)
err = pylirc.init("ircontrol", "./lircrc", blocking)
print(err)
if (err == 0):
raise IOError("IR init error!")
def test(self):
blocking = 0;
#
if(pylirc.init("pylirc", "./conf", blocking)):
code = {"config" : ""}
while(code["config"] != "quit"):
# Very intuitive indeed
if(not blocking):
print "."
# Delay...
time.sleep(1)
# Read next code
s = pylirc.nextcode(1)
# Loop as long as there are more on the queue
# (dont want to wait a second if the user pressed many buttons...)
while(s):
# Print all the configs...
for (code) in s:
print "Command: %s, Repeat: %d" % (code["config"], code["repeat"])
if(code["config"] == "blocking"):
blocking = 1
pylirc.blocking(1)
elif(code["config"] == "nonblocking"):
blocking = 0
pylirc.blocking(0)
# Read next code?
if(not blocking):
s = pylirc.nextcode(1)
else:
s = []
# Clean up lirc
pylirc.exit()
def listener():
try:
if use_pylirc:
sockid = pylirc.init("piradio", lircrc, blocking)
else:
# The following line is for Jessie and Stretch only
sockid = lirc.init("piradio", lircrc, blocking)
log.message("Listener on socket " + str(socket) + " established", log.DEBUG)
# Main Listen loop
print("Listening for input on IR sensor")
while True:
#pdb.set_trace()
if use_pylirc:
nextcode = pylirc.nextcode()
else:
nextcode = lirc.nextcode()
# For Jessie amend pylirc.nextcode to lirc.nextcode
if nextcode != None and len(nextcode) > 0:
if remote_led > 0:
GPIO.output(remote_led, True)
button = nextcode[0]
log.message(button, log.DEBUG)
print(button)
udpSend(button) # Send to radiod program
if remote_led > 0:
GPIO.output(remote_led, False)
else:
time.sleep(0.2)
except Exception as e:
log.message(str(e), log.ERROR)
print(str(e))
mesg = "Possible configuration error, check /etc/lirc/lircd.conf"
log.message(mesg, log.ERROR)
print(mesg)
mesg = "Activation IR Remote Control failed - Exiting"
log.message(mesg, log.ERROR)
print(mesg)
sys.exit(1)
def init(appname=None, cfg=None):
"""
Initialize lirc and begin monitoring for events.
:param appname: the name of the program that corresponds to the *prog*
value in the lircrc file (default: kaa)
:param cfg: the path to the lircrc config file (default: ~/.lircrc). See
http://www.lirc.org/html/configure.html for more details.
:raises: ImportError if pylirc is not installed.
"""
global _dispatcher
if _dispatcher:
# already running
return False
# This will raise if pylirc isn't available, however if it is, this will
# already be imported, so there is no risk of this being imported from a
# thread.
import pylirc
if cfg == None:
cfg = os.path.expanduser("~/.lircrc")
if appname == None:
appname = "kaa"
try:
fd = pylirc.init(appname, cfg)
except IOError:
# something went wrong
return False
if not fd:
# something went wrong
return False
pylirc.blocking(0)
_dispatcher = kaa.IOMonitor(_handle_lirc_input)
_dispatcher.register(fd)
kaa.main.signals["shutdown"].connect(stop)
return True
def init(appname=None, cfg=None):
"""
Initialize lirc and begin monitoring for events.
:param appname: the name of the program that corresponds to the *prog*
value in the lircrc file (default: kaa)
:param cfg: the path to the lircrc config file (default: ~/.lircrc). See
http://www.lirc.org/html/configure.html for more details.
:raises: ImportError if pylirc is not installed.
"""
global _dispatcher
if _dispatcher:
# already running
return False
# This will raise if pylirc isn't available, however if it is, this will
# already be imported, so there is no risk of this being imported from a
# thread.
import pylirc
if cfg == None:
cfg = os.path.expanduser("~/.lircrc")
if appname == None:
appname = "kaa"
try:
fd = pylirc.init(appname, cfg)
except IOError:
# something went wrong
return False
if not fd:
# something went wrong
return False
pylirc.blocking(0)
_dispatcher = kaa.IOMonitor(_handle_lirc_input)
_dispatcher.register(fd)
kaa.main.signals["shutdown"].connect(stop)
return True
def run(self):
if self.config_file:
x = XKeys()
import pylirc
#try:
if (pylirc.init("irkeys", self.config_file, 0)):
while True:
s = pylirc.nextcode(1)
if s:
for evt in s:
command = evt["config"]
print "IR recived :: " + command
x.SendKeyPress(command)
time.sleep(0.1)
x.SendKeyRelease(command)
def run(self):
if self.config_file:
x = XKeys()
import pylirc
#try:
if(pylirc.init("irkeys", self.config_file, 0)):
while True:
s = pylirc.nextcode(1)
if s:
for evt in s:
command = evt["config"]
print "IR recived :: " + command
x.SendKeyPress( command )
time.sleep(0.1)
x.SendKeyRelease( command )
def run(self):
try:
lirchandle = pylirc.init("ude-dbus-lirc-bridge", "/usr/share/ude/dbus-lirc-bridge/lircrc", True)
if lirchandle:
while True:
if self.stopped():
break
try:
timeout = select.select([lirchandle], [], [], 1) == ([], [], [])
except Exception, e:
print "IRWorker Exception", e
continue
if not timeout:
s = pylirc.nextcode()
if s:
for code in s:
if dbusobj:
dbusobj.IREvent(code)
# print "cmd",code
pylirc.exit()
def run(self):
try:
lirchandle = pylirc.init("ude-dbus-lirc-bridge",
"/usr/share/ude/dbus-lirc-bridge/lircrc",
True)
if lirchandle:
while True:
if self.stopped():
break
try:
timeout = select.select([lirchandle], [], [],
1) == ([], [], [])
except Exception, e:
print "IRWorker Exception", e
continue
if not timeout:
s = pylirc.nextcode()
if s:
for code in s:
if dbusobj:
dbusobj.IREvent(code)
#print "cmd",code
pylirc.exit()
def run(self):
try:
global lastInput
global stopThreads
if (pylirc.init("lircidle","/home/myth/scripts/lircrc_lircidle",0) == 0):
syslog.syslog('lircidle.py: unable to init lirc')
print('lircidle.py: unable to init lirc')
sys.exit(1)
while 1:
time.sleep(1)
c = pylirc.nextcode()
if c is not None:
#for (code) in c:
# syslog.syslog('lircidle.py (debug): code received (' + str(code["config"]) + ')')
# print('lircidle.py (debug): code received (' + str(code["config"]) + ')')
lastInput = time.time()
if stopThreads != 0: break
except:
syslog.syslog('lircidle.py: unexpected exception: ' + str(sys.exc_info()))
print('lircidle.py: unexpected exception: ' + str(sys.exc_info()))
finally:
pylirc.exit()
syslog.syslog('lircidle.py: exiting lirc thread')
print('lircidle.py: exiting lirc thread')
def loop():
while True:
s = pylirc.nextcode(1)
while (s):
for (code) in s:
myCar = Car()
myCar.stop()
print('Command: ', code["config"])
IR(code["config"])
if (not blocking):
s = pylirc.nextcode(1)
else:
s = []
def destroy():
GPIO.cleanup()
pylirc.exit()
if __name__ == '__main__':
setup()
keysacn()
print("setup ok")
pylirc.init("pylirc", "./conf", blocking)
try:
loop()
except KeyboardInterrupt:
destroy()
Adapted excerpt from Getting Started with Raspberry Pi by Matt Richardson
Modified by Rui Santos
Complete project details: http://randomnerdtutorials.com
'''
import pylirc
import RPi.GPIO as GPIO
GPIO.setmode(GPIO.BCM)
# Create a dictionary called pins to store the pin number, name, and pin state:
f = open('/home/pi/webserver/pin_status.csv', 'r')
pins = eval(f.read())
f.close()
pylirc.init('pylirc', '/home/pi/pylirc.conf', 0)
# Set each pin as an output and make it low:
for pin in pins:
GPIO.setup(pin, GPIO.OUT)
GPIO.output(pin, pins[pin]['state'])
while (True):
s = pylirc.nextcode(1)
command = None
if (s):
for (code) in s:
f = open('/home/pi/webserver/pin_status.csv', 'r')
pins = eval(f.read())
f.close()
print(code["config"])
def startPyLirc(self):
lircHandle = pylirc.init(LIRC_PROG_NAME, self.configFile, 0)
if (lircHandle != 0):
while (self.frontendActive):
self.consumePylirc(lircHandle)
pylirc.exit()
def main():
usage = "usage: pstream3_client_lirc [options]"
parser = OptionParser(usage)
parser.add_option("--daemon",
help="Run me as daemon", action="store_true", dest="daemon")
parser.add_option("--ip",
help="Ip where should i listen", dest="ip")
parser.add_option("--port",
help="Port where should i bind", dest="port")
parser.add_option("--dump",
help="Folder where should i dump", dest="dump")
parser.add_option("--lirc-config",
help="Path to lirc config", dest="lirc_config")
parser.add_option("--pid",
help="Process pid", dest="pid")
(options, args) = parser.parse_args()
if options.daemon:
ret= createDaemon()
if options.pid:
pid= os.getpid()
f= open(options.pid, "w")
f.write(str(pid))
f.close()
if options.ip and options.port:
ip= options.ip
port= options.port
else:
ip= "localhost"
port= str(8400)
client = xmlrpclib.ServerProxy("http://%s:%s/" % (ip, port))
h264_client= None
blocking= 1
if options.lirc_config:
lirc_path= options.lirc_config
else:
lirc_path="/etc/pstream/conf"
if(pylirc.init("pylirc", lirc_path, blocking)):
code= {"config": ""}
while(code["config"] != "quit"):
#Read next code
s= pylirc.nextcode(1)
#Right now i don't care what you press on remote.
code["config"]= "start_stream"
status= None
if(code["config"] == "start_stream"):
try:
status=h264_client.GetAppRunStatus()
except:
status=None
if (status!=AppStatus.RUNNING) or not status:
print("Creating new app")
h264= client.CreateApp("h264Stream")
notifyCopyProcess= client.CreateApp("NotifyCopyProcess")
notifyCopyProcess_client= xmlrpclib.ServerProxy("http://%s:%s/" % (ip,port) + str(notifyCopyProcess))
print h264, client.GetAppInstances()
h264_client= xmlrpclib.ServerProxy("http://%s:%s/" % (ip,port) + str(h264))
h264_client.SetAppValue("auto_restart", 1)
if options.dump:
h264_client.SetAppValue("dumpfolder", options.dump)
else:
h264_client.SetAppValue("dumpfolder", "/home/recode/dump")
h264_client.StartApp()
else:
print("Stoping stream")
client.DestroyInstance(h264)
client.DestroyInstance(notifyCopyProcess)
continue
while h264_client.GetAppRunStatus()!=AppStatus.RUNNING:
print "here"
sleep(.5)
print("Next code")
client.DestroyInstances()
pylirc.exit()
players = []
notDone = True
i = 1
while notDone:
name = raw_input('Enter player %i name: '%i)
if name == '':
confirm = raw_input('Please confirm (y/n) ')
if confirm == 'y':
notDone = False
else:
player = {'name':name, 'score':0}
players.append(player)
i = i + 1
roundd = 1
sockid = pylirc.init('any')
pygame.init()
displayInfo = pygame.display.Info()
width = displayInfo.current_w
height = displayInfo.current_h
buttonDelay = 0.01
screen = pygame.display.set_mode([width,height], pygame.FULLSCREEN)
pygame.mouse.set_visible(0)
screen.fill([255, 255, 255])
pygame.display.flip()
font = pygame.font.Font(None, 100)
scoreFont = pygame.font.Font(None, 50)
def __init__(self, app, conf):
if not pylirc.init(app, conf, 1):
raise Exception("Unable to init pylirc");
pylirc.blocking(0)
def setup():
global state
GPIO.setmode(GPIO.BOARD)
GPIO.setup(STERO, GPIO.OUT)
pylirc.init("pylirc", "./conf", blocking)
def run(self):
global code
print "IRRrec awaits IR commands"
if (select.select([self.lirchandle], [], [], 6) == ([], [], [])):
print "IRRrec timed out"
else:
s = pylirc.nextcode()
if (s):
# Print all the configs...
for code in s:
print code
lirchandle = pylirc.init("pylirc", "./conf", blocking)
if (lirchandle):
print "Succesfully opened lirc, handle is " + str(lirchandle)
tim = Timer()
tim.start()
irrec = IRRec(lirchandle)
irrec.start()
code = ""
while (code != "quit"):
if (irrec.isAlive() == 0):
irrec = IRRec(lirchandle)
# Revision 1.7 2003/02/22 22:12:40 mccabe
# Testprogram to test pylirc in multiple threads
#
# Revision 1.6 2002/12/21 20:30:26 mccabe
# Added id and log entries to most files
#
import pylirc, time
import RPi.GPIO as GPIO
GPIO.setmode(GPIO.BOARD)
GPIO.setup(7, GPIO.OUT)
blocking = 0
#
if pylirc.init("pylirc", "./conf", blocking):
code = {"config": ""}
while code["config"] != "quit":
# Very intuitive indeed
if not blocking:
print "."
# Delay...
time.sleep(1)
# Read next code
s = pylirc.nextcode(1)
# Loop as long as there are more on the queue
