def __init__(self,
spline,
label,
label_center,
from_node,
to_node,
parent=None,
**kwargs):
super(EdgeItem, self).__init__(parent, **kwargs)
self._edge_pen_width = kwargs.get('edge_pen_width',
self.EDGE_PEN_WIDTH)
self.from_node = from_node
self.from_node.add_outgoing_edge(self)
self.to_node = to_node
self.to_node.add_incoming_edge(self)
self._brush = QBrush(self._color)
self._label_pen = QPen()
self._label_pen.setColor(self._color)
self._label_pen.setJoinStyle(Qt.RoundJoin)
self._label_pen.setWidthF(self._label_pen_width)
self._edge_pen = QPen()
self._edge_pen.setColor(self._color)
self._edge_pen.setWidthF(self._edge_pen_width)
self._sibling_edges = set()
self._label = None
if label is not None:
self._label = QGraphicsSimpleTextItem(label)
font = self._label.font()
font.setPointSize(8)
self._label.setFont(font)
label_rect = self._label.boundingRect()
label_rect.moveCenter(label_center)
self._label.setPos(label_rect.x(), label_rect.y())
# spline specification according to http://www.graphviz.org/doc/info/attrs.html#k:splineType
coordinates = spline.split(' ')
# extract optional end_point
end_point = None
if coordinates[0].startswith('e,'):
parts = coordinates.pop(0)[2:].split(',')
end_point = QPointF(float(parts[0]), -float(parts[1]))
# extract optional start_point
if coordinates[0].startswith('s,'):
parts = coordinates.pop(0).split(',')
# first point
parts = coordinates.pop(0).split(',')
point = QPointF(float(parts[0]), -float(parts[1]))
path = QPainterPath(point)
while len(coordinates) > 2:
# extract triple of points for a cubic spline
parts = coordinates.pop(0).split(',')
point1 = QPointF(float(parts[0]), -float(parts[1]))
parts = coordinates.pop(0).split(',')
point2 = QPointF(float(parts[0]), -float(parts[1]))
parts = coordinates.pop(0).split(',')
point3 = QPointF(float(parts[0]), -float(parts[1]))
path.cubicTo(point1, point2, point3)
self._arrow = None
if end_point is not None:
# draw arrow
self._arrow = QGraphicsPolygonItem()
polygon = QPolygonF()
polygon.append(point3)
offset = QPointF(end_point - point3)
corner1 = QPointF(-offset.y(), offset.x()) * 0.35
corner2 = QPointF(offset.y(), -offset.x()) * 0.35
polygon.append(point3 + corner1)
polygon.append(end_point)
polygon.append(point3 + corner2)
self._arrow.setPolygon(polygon)
self._path = QGraphicsPathItem()
self._path.setPath(path)
self.addToGroup(self._path)
self._brush.setColor(self._color)
self._edge_pen.setColor(self._color)
self._label_pen.setColor(self._color)
self._path.setPen(self._edge_pen)
if self._arrow is not None:
self._arrow.setBrush(self._brush)
self._arrow.setPen(self._edge_pen)
if self._label is not None:
self._label.setBrush(self._brush)
self._label.setPen(self._label_pen)
class EdgeItem(GraphItem):
_qt_pen_styles = {
'dashed': Qt.DashLine,
'dotted': Qt.DotLine,
'solid': Qt.SolidLine,
}
def __init__(self, highlight_level, spline, label_center, label, from_node, to_node, parent=None, penwidth=1, edge_color=None, style='solid'):
super(EdgeItem, self).__init__(highlight_level, parent)
self.from_node = from_node
self.from_node.add_outgoing_edge(self)
self.to_node = to_node
self.to_node.add_incoming_edge(self)
self._default_edge_color = self._COLOR_BLACK
if edge_color is not None:
self._default_edge_color = edge_color
self._default_text_color = self._COLOR_BLACK
self._default_color = self._COLOR_BLACK
self._text_brush = QBrush(self._default_color)
self._shape_brush = QBrush(self._default_color)
if style in ['dashed', 'dotted']:
self._shape_brush = QBrush(Qt.transparent)
self._label_pen = QPen()
self._label_pen.setColor(self._default_text_color)
self._label_pen.setJoinStyle(Qt.RoundJoin)
self._edge_pen = QPen(self._label_pen)
self._edge_pen.setWidth(penwidth)
self._edge_pen.setColor(self._default_edge_color)
self._edge_pen.setStyle(self._qt_pen_styles.get(style, Qt.SolidLine))
self._sibling_edges = set()
self._label = None
if label is not None:
self._label = QGraphicsSimpleTextItem(label)
label_rect = self._label.boundingRect()
label_rect.moveCenter(label_center)
self._label.setPos(label_rect.x(), label_rect.y())
self._label.hoverEnterEvent = self._handle_hoverEnterEvent
self._label.hoverLeaveEvent = self._handle_hoverLeaveEvent
self._label.setAcceptHoverEvents(True)
# spline specification according to http://www.graphviz.org/doc/info/attrs.html#k:splineType
coordinates = spline.split(' ')
# extract optional end_point
end_point = None
if (coordinates[0].startswith('e,')):
parts = coordinates.pop(0)[2:].split(',')
end_point = QPointF(float(parts[0]), -float(parts[1]))
# extract optional start_point
if (coordinates[0].startswith('s,')):
parts = coordinates.pop(0).split(',')
# first point
parts = coordinates.pop(0).split(',')
point = QPointF(float(parts[0]), -float(parts[1]))
path = QPainterPath(point)
while len(coordinates) > 2:
# extract triple of points for a cubic spline
parts = coordinates.pop(0).split(',')
point1 = QPointF(float(parts[0]), -float(parts[1]))
parts = coordinates.pop(0).split(',')
point2 = QPointF(float(parts[0]), -float(parts[1]))
parts = coordinates.pop(0).split(',')
point3 = QPointF(float(parts[0]), -float(parts[1]))
path.cubicTo(point1, point2, point3)
self._arrow = None
if end_point is not None:
# draw arrow
self._arrow = QGraphicsPolygonItem()
polygon = QPolygonF()
polygon.append(point3)
offset = QPointF(end_point - point3)
corner1 = QPointF(-offset.y(), offset.x()) * 0.35
corner2 = QPointF(offset.y(), -offset.x()) * 0.35
polygon.append(point3 + corner1)
polygon.append(end_point)
polygon.append(point3 + corner2)
self._arrow.setPolygon(polygon)
self._arrow.hoverEnterEvent = self._handle_hoverEnterEvent
self._arrow.hoverLeaveEvent = self._handle_hoverLeaveEvent
self._arrow.setAcceptHoverEvents(True)
self._path = QGraphicsPathItem()
self._path.setPath(path)
self.addToGroup(self._path)
self.set_node_color()
self.set_label_color()
def add_to_scene(self, scene):
scene.addItem(self)
if self._label is not None:
scene.addItem(self._label)
if self._arrow is not None:
scene.addItem(self._arrow)
def setToolTip(self, tool_tip):
super(EdgeItem, self).setToolTip(tool_tip)
if self._label is not None:
self._label.setToolTip(tool_tip)
if self._arrow is not None:
self._arrow.setToolTip(tool_tip)
def add_sibling_edge(self, edge):
self._sibling_edges.add(edge)
def set_node_color(self, color=None):
if color is None:
self._label_pen.setColor(self._default_text_color)
self._text_brush.setColor(self._default_color)
if self._shape_brush.isOpaque():
self._shape_brush.setColor(self._default_color)
self._edge_pen.setColor(self._default_edge_color)
else:
self._label_pen.setColor(color)
self._text_brush.setColor(color)
if self._shape_brush.isOpaque():
self._shape_brush.setColor(color)
self._edge_pen.setColor(color)
self._path.setPen(self._edge_pen)
if self._arrow is not None:
self._arrow.setBrush(self._shape_brush)
self._arrow.setPen(self._edge_pen)
def set_label_color(self, color=None):
if color is None:
self._label_pen.setColor(self._default_text_color)
else:
self._label_pen.setColor(color)
if self._label is not None:
self._label.setBrush(self._text_brush)
self._label.setPen(self._label_pen)
def _handle_hoverEnterEvent(self, event):
# hovered edge item in red
self.set_node_color(self._COLOR_RED)
if self._highlight_level > 1:
if self.from_node != self.to_node:
# from-node in blue
self.from_node.set_node_color(self._COLOR_BLUE)
# to-node in green
self.to_node.set_node_color(self._COLOR_GREEN)
else:
# from-node/in-node in teal
self.from_node.set_node_color(self._COLOR_TEAL)
self.to_node.set_node_color(self._COLOR_TEAL)
if self._highlight_level > 2:
# sibling edges in orange
for sibling_edge in self._sibling_edges:
sibling_edge.set_node_color(self._COLOR_ORANGE)
def _handle_hoverLeaveEvent(self, event):
self.set_node_color()
if self._highlight_level > 1:
self.from_node.set_node_color()
self.to_node.set_node_color()
if self._highlight_level > 2:
for sibling_edge in self._sibling_edges:
sibling_edge.set_node_color()
def __init__(self, highlight_level, spline, label_center, label, from_node, to_node, parent=None, penwidth=1, edge_color=None, style='solid'):
super(EdgeItem, self).__init__(highlight_level, parent)
self.from_node = from_node
self.from_node.add_outgoing_edge(self)
self.to_node = to_node
self.to_node.add_incoming_edge(self)
self._default_edge_color = self._COLOR_BLACK
if edge_color is not None:
self._default_edge_color = edge_color
self._default_text_color = self._COLOR_BLACK
self._default_color = self._COLOR_BLACK
self._text_brush = QBrush(self._default_color)
self._shape_brush = QBrush(self._default_color)
if style in ['dashed', 'dotted']:
self._shape_brush = QBrush(Qt.transparent)
self._label_pen = QPen()
self._label_pen.setColor(self._default_text_color)
self._label_pen.setJoinStyle(Qt.RoundJoin)
self._edge_pen = QPen(self._label_pen)
self._edge_pen.setWidth(penwidth)
self._edge_pen.setColor(self._default_edge_color)
self._edge_pen.setStyle(self._qt_pen_styles.get(style, Qt.SolidLine))
self._sibling_edges = set()
self._label = None
if label is not None:
self._label = QGraphicsSimpleTextItem(label)
label_rect = self._label.boundingRect()
label_rect.moveCenter(label_center)
self._label.setPos(label_rect.x(), label_rect.y())
self._label.hoverEnterEvent = self._handle_hoverEnterEvent
self._label.hoverLeaveEvent = self._handle_hoverLeaveEvent
self._label.setAcceptHoverEvents(True)
# spline specification according to http://www.graphviz.org/doc/info/attrs.html#k:splineType
coordinates = spline.split(' ')
# extract optional end_point
end_point = None
if (coordinates[0].startswith('e,')):
parts = coordinates.pop(0)[2:].split(',')
end_point = QPointF(float(parts[0]), -float(parts[1]))
# extract optional start_point
if (coordinates[0].startswith('s,')):
parts = coordinates.pop(0).split(',')
# first point
parts = coordinates.pop(0).split(',')
point = QPointF(float(parts[0]), -float(parts[1]))
path = QPainterPath(point)
while len(coordinates) > 2:
# extract triple of points for a cubic spline
parts = coordinates.pop(0).split(',')
point1 = QPointF(float(parts[0]), -float(parts[1]))
parts = coordinates.pop(0).split(',')
point2 = QPointF(float(parts[0]), -float(parts[1]))
parts = coordinates.pop(0).split(',')
point3 = QPointF(float(parts[0]), -float(parts[1]))
path.cubicTo(point1, point2, point3)
self._arrow = None
if end_point is not None:
# draw arrow
self._arrow = QGraphicsPolygonItem()
polygon = QPolygonF()
polygon.append(point3)
offset = QPointF(end_point - point3)
corner1 = QPointF(-offset.y(), offset.x()) * 0.35
corner2 = QPointF(offset.y(), -offset.x()) * 0.35
polygon.append(point3 + corner1)
polygon.append(end_point)
polygon.append(point3 + corner2)
self._arrow.setPolygon(polygon)
self._arrow.hoverEnterEvent = self._handle_hoverEnterEvent
self._arrow.hoverLeaveEvent = self._handle_hoverLeaveEvent
self._arrow.setAcceptHoverEvents(True)
self._path = QGraphicsPathItem()
self._path.setPath(path)
self.addToGroup(self._path)
self.set_node_color()
self.set_label_color()
def __init__(self,
highlight_level,
spline,
label_center,
label,
from_node,
to_node,
parent=None,
penwidth=1,
edge_color=None,
style='solid'):
super(EdgeItem, self).__init__(highlight_level, parent)
self.from_node = from_node
self.from_node.add_outgoing_edge(self)
self.to_node = to_node
self.to_node.add_incoming_edge(self)
self._default_edge_color = self._COLOR_BLACK
if edge_color is not None:
self._default_edge_color = edge_color
self._default_text_color = self._COLOR_BLACK
self._default_color = self._COLOR_BLACK
self._text_brush = QBrush(self._default_color)
self._shape_brush = QBrush(self._default_color)
if style in ['dashed', 'dotted']:
self._shape_brush = QBrush(Qt.transparent)
self._label_pen = QPen()
self._label_pen.setColor(self._default_text_color)
self._label_pen.setJoinStyle(Qt.RoundJoin)
self._edge_pen = QPen(self._label_pen)
self._edge_pen.setWidth(penwidth)
self._edge_pen.setColor(self._default_edge_color)
self._edge_pen.setStyle(self._qt_pen_styles.get(style, Qt.SolidLine))
self._sibling_edges = set()
self._label = None
if label is not None:
self._label = QGraphicsSimpleTextItem(label)
label_rect = self._label.boundingRect()
label_rect.moveCenter(label_center)
self._label.setPos(label_rect.x(), label_rect.y())
self._label.hoverEnterEvent = self._handle_hoverEnterEvent
self._label.hoverLeaveEvent = self._handle_hoverLeaveEvent
self._label.setAcceptHoverEvents(True)
# spline specification according to http://www.graphviz.org/doc/info/attrs.html#k:splineType
coordinates = spline.split(' ')
# extract optional end_point
end_point = None
if (coordinates[0].startswith('e,')):
parts = coordinates.pop(0)[2:].split(',')
end_point = QPointF(float(parts[0]), -float(parts[1]))
# extract optional start_point
if (coordinates[0].startswith('s,')):
parts = coordinates.pop(0).split(',')
# first point
parts = coordinates.pop(0).split(',')
point = QPointF(float(parts[0]), -float(parts[1]))
path = QPainterPath(point)
while len(coordinates) > 2:
# extract triple of points for a cubic spline
parts = coordinates.pop(0).split(',')
point1 = QPointF(float(parts[0]), -float(parts[1]))
parts = coordinates.pop(0).split(',')
point2 = QPointF(float(parts[0]), -float(parts[1]))
parts = coordinates.pop(0).split(',')
point3 = QPointF(float(parts[0]), -float(parts[1]))
path.cubicTo(point1, point2, point3)
self._arrow = None
if end_point is not None:
# draw arrow
self._arrow = QGraphicsPolygonItem()
polygon = QPolygonF()
polygon.append(point3)
offset = QPointF(end_point - point3)
corner1 = QPointF(-offset.y(), offset.x()) * 0.35
corner2 = QPointF(offset.y(), -offset.x()) * 0.35
polygon.append(point3 + corner1)
polygon.append(end_point)
polygon.append(point3 + corner2)
self._arrow.setPolygon(polygon)
self._arrow.hoverEnterEvent = self._handle_hoverEnterEvent
self._arrow.hoverLeaveEvent = self._handle_hoverLeaveEvent
self._arrow.setAcceptHoverEvents(True)
self._path = QGraphicsPathItem()
self._path.setPath(path)
self.addToGroup(self._path)
self.set_node_color()
self.set_label_color()
class EdgeItem(GraphItem):
_qt_pen_styles = {
'dashed': Qt.DashLine,
'dotted': Qt.DotLine,
'solid': Qt.SolidLine,
}
def __init__(self,
highlight_level,
spline,
label_center,
label,
from_node,
to_node,
parent=None,
penwidth=1,
edge_color=None,
style='solid'):
super(EdgeItem, self).__init__(highlight_level, parent)
self.from_node = from_node
self.from_node.add_outgoing_edge(self)
self.to_node = to_node
self.to_node.add_incoming_edge(self)
self._default_edge_color = self._COLOR_BLACK
if edge_color is not None:
self._default_edge_color = edge_color
self._default_text_color = self._COLOR_BLACK
self._default_color = self._COLOR_BLACK
self._text_brush = QBrush(self._default_color)
self._shape_brush = QBrush(self._default_color)
if style in ['dashed', 'dotted']:
self._shape_brush = QBrush(Qt.transparent)
self._label_pen = QPen()
self._label_pen.setColor(self._default_text_color)
self._label_pen.setJoinStyle(Qt.RoundJoin)
self._edge_pen = QPen(self._label_pen)
self._edge_pen.setWidth(penwidth)
self._edge_pen.setColor(self._default_edge_color)
self._edge_pen.setStyle(self._qt_pen_styles.get(style, Qt.SolidLine))
self._sibling_edges = set()
self._label = None
if label is not None:
self._label = QGraphicsSimpleTextItem(label)
label_rect = self._label.boundingRect()
label_rect.moveCenter(label_center)
self._label.setPos(label_rect.x(), label_rect.y())
self._label.hoverEnterEvent = self._handle_hoverEnterEvent
self._label.hoverLeaveEvent = self._handle_hoverLeaveEvent
self._label.setAcceptHoverEvents(True)
# spline specification according to http://www.graphviz.org/doc/info/attrs.html#k:splineType
coordinates = spline.split(' ')
# extract optional end_point
end_point = None
if (coordinates[0].startswith('e,')):
parts = coordinates.pop(0)[2:].split(',')
end_point = QPointF(float(parts[0]), -float(parts[1]))
# extract optional start_point
if (coordinates[0].startswith('s,')):
parts = coordinates.pop(0).split(',')
# first point
parts = coordinates.pop(0).split(',')
point = QPointF(float(parts[0]), -float(parts[1]))
path = QPainterPath(point)
while len(coordinates) > 2:
# extract triple of points for a cubic spline
parts = coordinates.pop(0).split(',')
point1 = QPointF(float(parts[0]), -float(parts[1]))
parts = coordinates.pop(0).split(',')
point2 = QPointF(float(parts[0]), -float(parts[1]))
parts = coordinates.pop(0).split(',')
point3 = QPointF(float(parts[0]), -float(parts[1]))
path.cubicTo(point1, point2, point3)
self._arrow = None
if end_point is not None:
# draw arrow
self._arrow = QGraphicsPolygonItem()
polygon = QPolygonF()
polygon.append(point3)
offset = QPointF(end_point - point3)
corner1 = QPointF(-offset.y(), offset.x()) * 0.35
corner2 = QPointF(offset.y(), -offset.x()) * 0.35
polygon.append(point3 + corner1)
polygon.append(end_point)
polygon.append(point3 + corner2)
self._arrow.setPolygon(polygon)
self._arrow.hoverEnterEvent = self._handle_hoverEnterEvent
self._arrow.hoverLeaveEvent = self._handle_hoverLeaveEvent
self._arrow.setAcceptHoverEvents(True)
self._path = QGraphicsPathItem()
self._path.setPath(path)
self.addToGroup(self._path)
self.set_node_color()
self.set_label_color()
def add_to_scene(self, scene):
scene.addItem(self)
if self._label is not None:
scene.addItem(self._label)
if self._arrow is not None:
scene.addItem(self._arrow)
def setToolTip(self, tool_tip):
super(EdgeItem, self).setToolTip(tool_tip)
if self._label is not None:
self._label.setToolTip(tool_tip)
if self._arrow is not None:
self._arrow.setToolTip(tool_tip)
def add_sibling_edge(self, edge):
self._sibling_edges.add(edge)
def set_node_color(self, color=None):
if color is None:
self._label_pen.setColor(self._default_text_color)
self._text_brush.setColor(self._default_color)
if self._shape_brush.isOpaque():
self._shape_brush.setColor(self._default_color)
self._edge_pen.setColor(self._default_edge_color)
else:
self._label_pen.setColor(color)
self._text_brush.setColor(color)
if self._shape_brush.isOpaque():
self._shape_brush.setColor(color)
self._edge_pen.setColor(color)
self._path.setPen(self._edge_pen)
if self._arrow is not None:
self._arrow.setBrush(self._shape_brush)
self._arrow.setPen(self._edge_pen)
def set_label_color(self, color=None):
if color is None:
self._label_pen.setColor(self._default_text_color)
else:
self._label_pen.setColor(color)
if self._label is not None:
self._label.setBrush(self._text_brush)
self._label.setPen(self._label_pen)
def _handle_hoverEnterEvent(self, event):
# hovered edge item in red
self.set_node_color(self._COLOR_RED)
if self._highlight_level > 1:
if self.from_node != self.to_node:
# from-node in blue
self.from_node.set_node_color(self._COLOR_BLUE)
# to-node in green
self.to_node.set_node_color(self._COLOR_GREEN)
else:
# from-node/in-node in teal
self.from_node.set_node_color(self._COLOR_TEAL)
self.to_node.set_node_color(self._COLOR_TEAL)
if self._highlight_level > 2:
# sibling edges in orange
for sibling_edge in self._sibling_edges:
sibling_edge.set_node_color(self._COLOR_ORANGE)
def _handle_hoverLeaveEvent(self, event):
self.set_node_color()
if self._highlight_level > 1:
self.from_node.set_node_color()
self.to_node.set_node_color()
if self._highlight_level > 2:
for sibling_edge in self._sibling_edges:
sibling_edge.set_node_color()
def __init__(self, spline, label, label_center, from_node, to_node, parent=None, **kwargs):
super(EdgeItem, self).__init__(parent, **kwargs)
self._edge_pen_width = kwargs.get('edge_pen_width', self.EDGE_PEN_WIDTH)
self.from_node = from_node
self.from_node.add_outgoing_edge(self)
self.to_node = to_node
self.to_node.add_incoming_edge(self)
self._brush = QBrush(self._color)
self._label_pen = QPen()
self._label_pen.setColor(self._color)
self._label_pen.setJoinStyle(Qt.RoundJoin)
self._label_pen.setWidthF(self._label_pen_width)
self._edge_pen = QPen()
self._edge_pen.setColor(self._color)
self._edge_pen.setWidthF(self._edge_pen_width)
self._sibling_edges = set()
self._label = None
if label is not None:
self._label = QGraphicsSimpleTextItem(label)
font = self._label.font()
font.setPointSize(8)
self._label.setFont(font)
label_rect = self._label.boundingRect()
label_rect.moveCenter(label_center)
self._label.setPos(label_rect.x(), label_rect.y())
# spline specification according to http://www.graphviz.org/doc/info/attrs.html#k:splineType
coordinates = spline.split(' ')
# extract optional end_point
end_point = None
if coordinates[0].startswith('e,'):
parts = coordinates.pop(0)[2:].split(',')
end_point = QPointF(float(parts[0]), -float(parts[1]))
# extract optional start_point
if coordinates[0].startswith('s,'):
parts = coordinates.pop(0).split(',')
# first point
parts = coordinates.pop(0).split(',')
point = QPointF(float(parts[0]), -float(parts[1]))
path = QPainterPath(point)
while len(coordinates) > 2:
# extract triple of points for a cubic spline
parts = coordinates.pop(0).split(',')
point1 = QPointF(float(parts[0]), -float(parts[1]))
parts = coordinates.pop(0).split(',')
point2 = QPointF(float(parts[0]), -float(parts[1]))
parts = coordinates.pop(0).split(',')
point3 = QPointF(float(parts[0]), -float(parts[1]))
path.cubicTo(point1, point2, point3)
self._arrow = None
if end_point is not None:
# draw arrow
self._arrow = QGraphicsPolygonItem()
polygon = QPolygonF()
polygon.append(point3)
offset = QPointF(end_point - point3)
corner1 = QPointF(-offset.y(), offset.x()) * 0.35
corner2 = QPointF(offset.y(), -offset.x()) * 0.35
polygon.append(point3 + corner1)
polygon.append(end_point)
polygon.append(point3 + corner2)
self._arrow.setPolygon(polygon)
self._path = QGraphicsPathItem()
self._path.setPath(path)
self.addToGroup(self._path)
self._brush.setColor(self._color)
self._edge_pen.setColor(self._color)
self._label_pen.setColor(self._color)
self._path.setPen(self._edge_pen)
if self._arrow is not None:
self._arrow.setBrush(self._brush)
self._arrow.setPen(self._edge_pen)
if self._label is not None:
self._label.setBrush(self._brush)
self._label.setPen(self._label_pen)
def __init__(self, highlight_level, bounding_box, label, shape, color=None, parent=None, label_pos=None, tooltip=None):
super(NodeItem, self).__init__(highlight_level, parent)
self._default_color = self._COLOR_BLACK if color is None else color
self._brush = QBrush(self._default_color)
self._label_pen = QPen()
self._label_pen.setColor(self._default_color)
self._label_pen.setJoinStyle(Qt.RoundJoin)
self._ellipse_pen = QPen(self._label_pen)
self._ellipse_pen.setWidth(1)
self._incoming_edges = set()
self._outgoing_edges = set()
if shape == 'box':
self._graphics_item = QGraphicsRectItem(bounding_box)
# Since we don't have unique GraphicsItems other than Ellipse and Rect,
# Using Polygon to draw the following using bounding_box
elif shape == 'octagon':
rect = bounding_box.getRect()
octagon_polygon = QPolygonF([QPointF(rect[0], rect[1] + 3 * rect[3] / 10),
QPointF(rect[0], rect[1] + 7 * rect[3] / 10),
QPointF(rect[0] + 3 * rect[2] / 10, rect[1] + rect[3]),
QPointF(rect[0] + 7 * rect[2] / 10, rect[1] + rect[3]),
QPointF(rect[0] + rect[2], rect[1] + 7 * rect[3] / 10),
QPointF(rect[0] + rect[2], rect[1] + 3 * rect[3] / 10),
QPointF(rect[0] + 7 * rect[2] / 10, rect[1]),
QPointF(rect[0] + 3 * rect[2] / 10, rect[1])])
self._graphics_item = QGraphicsPolygonItem(octagon_polygon)
elif shape == 'doubleoctagon':
rect = bounding_box.getRect()
inner_fold = 3.0
octagon_polygon = QPolygonF([QPointF(rect[0], rect[1] + 3 * rect[3] / 10),
QPointF(rect[0], rect[1] + 7 * rect[3] / 10),
QPointF(rect[0] + 3 * rect[2] / 10, rect[1] + rect[3]),
QPointF(rect[0] + 7 * rect[2] / 10, rect[1] + rect[3]),
QPointF(rect[0] + rect[2], rect[1] + 7 * rect[3] / 10),
QPointF(rect[0] + rect[2], rect[1] + 3 * rect[3] / 10),
QPointF(rect[0] + 7 * rect[2] / 10, rect[1]),
QPointF(rect[0] + 3 * rect[2] / 10, rect[1]),
# inner
QPointF(rect[0], rect[1] + 3 * rect[3] / 10),
QPointF(rect[0] + inner_fold, rect[1] + 3 * rect[3] / 10 + inner_fold / 2),
QPointF(rect[0] + inner_fold, rect[1] + 7 * rect[3] / 10 - inner_fold / 2),
QPointF(rect[0] + 3 * rect[2] / 10, rect[1] + rect[3] - inner_fold),
QPointF(rect[0] + 7 * rect[2] / 10, rect[1] + rect[3] - inner_fold),
QPointF(rect[0] + rect[2] - inner_fold, rect[1] + 7 * rect[3] / 10 - inner_fold / 2),
QPointF(rect[0] + rect[2] - inner_fold, rect[1] + 3 * rect[3] / 10 + inner_fold / 2),
QPointF(rect[0] + 7 * rect[2] / 10, rect[1] + inner_fold),
QPointF(rect[0] + 3 * rect[2] / 10, rect[1] + inner_fold),
QPointF(rect[0] + inner_fold, rect[1] + 3 * rect[3] / 10 + inner_fold / 2)
])
self._graphics_item = QGraphicsPolygonItem(octagon_polygon)
elif shape == 'note':
rect = bounding_box.getRect()
note_polygon = QPolygonF([QPointF(rect[0] + 9 * rect[2] / 10, rect[1]),
QPointF(rect[0], rect[1]),
QPointF(rect[0], rect[1] + rect[3]),
QPointF(rect[0] + rect[2], rect[1] + rect[3]),
QPointF(rect[0] + rect[2], rect[1] + rect[3] / 5),
QPointF(rect[0] + 9 * rect[2] / 10, rect[1] + rect[3] / 5),
QPointF(rect[0] + 9 * rect[2] / 10, rect[1]),
QPointF(rect[0] + rect[2], rect[1] + rect[3] / 5),
QPointF(rect[0] + rect[2], rect[1] + rect[3] / 5)])
self._graphics_item = QGraphicsPolygonItem(note_polygon)
else:
self._graphics_item = QGraphicsEllipseItem(bounding_box)
self.addToGroup(self._graphics_item)
self._label = QGraphicsSimpleTextItem(label)
label_rect = self._label.boundingRect()
if label_pos is None:
label_rect.moveCenter(bounding_box.center())
else:
label_rect.moveCenter(label_pos)
self._label.setPos(label_rect.x(), label_rect.y())
self.addToGroup(self._label)
if tooltip is not None:
self.setToolTip(tooltip)
self.set_node_color()
self.setAcceptHoverEvents(True)
self.hovershape = None
def create(shape, bounding_box):
ShapeFactory.message = None
graphics_item = None
if shape in ('box', 'rect', 'rectangle'):
graphics_item = QGraphicsRoundRectItem(bounding_box)
elif shape in ('ellipse', 'point'):
graphics_item = QGraphicsEllipseItem(bounding_box)
elif shape == 'diamond':
points = QPolygonF([
QPointF(bounding_box.x(),
bounding_box.y() + bounding_box.height() / 2),
QPointF(bounding_box.x() + bounding_box.width() / 2,
bounding_box.y() + bounding_box.height()),
QPointF(bounding_box.x() + bounding_box.width(),
bounding_box.y() + bounding_box.height() / 2),
QPointF(bounding_box.x() + bounding_box.width() / 2,
bounding_box.y())
])
graphics_item = QGraphicsPolygonItem(points)
elif shape == 'parallelogram':
points = QPolygonF([
QPointF(bounding_box.x() + bounding_box.width() * 1 / 6,
bounding_box.y()),
QPointF(bounding_box.x() + bounding_box.width(),
bounding_box.y()),
QPointF(bounding_box.x() + bounding_box.width() * 5 / 6,
bounding_box.y() + bounding_box.height()),
QPointF(bounding_box.x(),
bounding_box.y() + bounding_box.height())
])
graphics_item = QGraphicsPolygonItem(points)
elif shape == 'cds':
points = QPolygonF([
QPointF(bounding_box.x(), bounding_box.y()),
QPointF(bounding_box.x() + bounding_box.width() * 5 / 6,
bounding_box.y()),
QPointF(bounding_box.x() + bounding_box.width(),
bounding_box.y() + bounding_box.height() / 2),
QPointF(bounding_box.x() + bounding_box.width() * 5 / 6,
bounding_box.y() + bounding_box.height()),
QPointF(bounding_box.x(),
bounding_box.y() + bounding_box.height())
])
graphics_item = QGraphicsPolygonItem(points)
elif shape == 'rarrow':
points = QPolygonF([
QPointF(bounding_box.x(), bounding_box.y()),
QPointF(bounding_box.x() + bounding_box.width() * 4 / 6,
bounding_box.y()),
QPointF(bounding_box.x() + bounding_box.width() * 4 / 6,
bounding_box.y() - bounding_box.height() * 2 / 6),
QPointF(bounding_box.x() + bounding_box.width(),
bounding_box.y() + bounding_box.height() / 2),
QPointF(bounding_box.x() + bounding_box.width() * 4 / 6,
bounding_box.y() + bounding_box.height() * 8 / 6),
QPointF(bounding_box.x() + bounding_box.width() * 4 / 6,
bounding_box.y() + bounding_box.height()),
QPointF(bounding_box.x(),
bounding_box.y() + bounding_box.height())
])
graphics_item = QGraphicsPolygonItem(points)
elif shape == 'larrow':
points = QPolygonF([
QPointF(bounding_box.x() + bounding_box.width() * 2 / 6,
bounding_box.y()),
QPointF(bounding_box.x() + bounding_box.width() * 2 / 6,
bounding_box.y() - bounding_box.height() * 2 / 6),
QPointF(bounding_box.x(),
bounding_box.y() + bounding_box.height() / 2),
QPointF(bounding_box.x() + bounding_box.width() * 2 / 6,
bounding_box.y() + bounding_box.height() * 8 / 6),
QPointF(bounding_box.x() + bounding_box.width() * 2 / 6,
bounding_box.y() + bounding_box.height()),
QPointF(bounding_box.x() + bounding_box.width(),
bounding_box.y() + bounding_box.height()),
QPointF(bounding_box.x() + bounding_box.width(),
bounding_box.y())
])
graphics_item = QGraphicsPolygonItem(points)
elif shape == 'record':
graphics_item = QGraphicsRectItem(bounding_box)
elif shape == 'hexagon':
points = QPolygonF([
QPointF(bounding_box.x() + bounding_box.width() * 1 / 5,
bounding_box.y()),
QPointF(bounding_box.x() + bounding_box.width() * 4 / 5,
bounding_box.y()),
QPointF(bounding_box.x() + bounding_box.width(),
bounding_box.y() + bounding_box.height() / 2),
QPointF(bounding_box.x() + bounding_box.width() * 4 / 5,
bounding_box.y() + bounding_box.height()),
QPointF(bounding_box.x() + bounding_box.width() * 1 / 5,
bounding_box.y() + bounding_box.height()),
QPointF(bounding_box.x(),
bounding_box.y() + bounding_box.height() / 2)
])
graphics_item = QGraphicsPolygonItem(points)
elif shape == 'triangle':
points = QPolygonF([
QPointF(bounding_box.x() + bounding_box.width() / 2,
bounding_box.y()),
QPointF(bounding_box.x() + bounding_box.width(),
bounding_box.y() + bounding_box.height() * 3 / 4),
QPointF(bounding_box.x(),
bounding_box.y() + bounding_box.height() * 3 / 4)
])
graphics_item = QGraphicsPolygonItem(points)
elif shape == 'circle':
diameter = min(bounding_box.width(), bounding_box.height())
graphics_item = QGraphicsEllipseItem(bounding_box.x(),
bounding_box.y(), diameter,
diameter)
else:
graphics_item = QGraphicsRectItem(bounding_box)
ShapeFactory.message = "WARNING: %s is unknown shape, box used instead" % shape
return graphics_item
