def savePlotAsTable(stackplots=None,spimposeplots=None,dataplots=None,outUrl='table.tex') :
#tabtex=getPlotAsTable(stackplots,spimposeplots,dataplots)
href=None
if(stackplots is not None) : href=stackplots.At(0)
if(href is None and spimposeplots is not None) : href=spimposeplots.At(0)
if(href is None and dataplots is not None) : href=dataplots.At(0)
if(href is None) : return
colfmt='l'
colnames=''
for ibin in xrange(1,href.GetXaxis().GetNbins()+1) :
colfmt += 'c'
colnames += ' & ' + href.GetXaxis().GetBinLabel(ibin)
tabtex = '\\begin{table}[htp]\n'
tabtex += '\\begin{center}\n'
tabtex += '\\caption{}\n'
tabtex += '\\label{tab:table}\n'
tabtex += '\\begin{tabular}{'+colfmt+'} \\hline\n'
tabtex += 'Process ' + colnames + '\\\\ \\hline\\hline\n'
#create the sum
if(stackplots.At(0) is not None) :
stackSum = stackplots.At(0).Clone("totalstack")
stackSum.SetTitle('Total expected')
stackSum.Reset('ICE')
for p in stackplots: stackSum.Add(p)
stackplots.Add(stackSum)
alllists = [stackplots, spimposeplots,dataplots ]
for ll in alllists :
for p in ll :
tabtex += p.GetTitle()
for ibin in xrange(1,p.GetXaxis().GetNbins()+1) :
val = p.GetBinContent(ibin)
valerr= p.GetBinError(ibin)
try :
tabtex += ' & '
fmtValue = toLatexRounded(val,valerr)
fmtValue = fmtValue.replace("[","(")
fmtValue = fmtValue.replace("]",")")
tabtex += fmtValue
except :
tabtex += ' & '
tabtex += '\\\\\n'
tabtex += '\\hline\n'
tabtex += '\\end{tabular}\n'
tabtex += '\\end{center}\n'
tabtex += '\\end{table}\n'
fileObj = open(outUrl,"w")
#fileObj.write(tabtex.Data())
fileObj.write(tabtex)
fileObj.close()
def savePlotAsTable(stackplots=None,spimposeplots=None,dataplots=None,outUrl='table.tex') :
#tabtex=getPlotAsTable(stackplots,spimposeplots,dataplots)
href=None
if(stackplots is not None) : href=stackplots.At(0)
if(href is None and spimposeplots is not None) : href=spimposeplots.At(0)
if(href is None and dataplots is not None) : href=dataplots.At(0)
if(href is None) : return
colfmt='l'
colnames=''
for ibin in xrange(1,href.GetXaxis().GetNbins()+1) :
colfmt += 'c'
colnames += ' & ' + href.GetXaxis().GetBinLabel(ibin)
tabtex = '\\begin{table}[htp]\n'
tabtex += '\\begin{center}\n'
tabtex += '\\caption{}\n'
tabtex += '\\label{tab:table}\n'
tabtex += '\\begin{tabular}{'+colfmt+'} \\hline\n'
tabtex += 'Process ' + colnames + '\\\\ \\hline\\hline\n'
#create the sum
if(stackplots.At(0) is not None) :
stackSum = stackplots.At(0).Clone("totalstack")
stackSum.SetTitle('Total expected')
stackSum.Reset('ICE')
for p in stackplots: stackSum.Add(p)
stackplots.Add(stackSum)
alllists = [stackplots, spimposeplots,dataplots ]
for ll in alllists :
for p in ll :
tabtex += p.GetTitle()
for ibin in xrange(1,p.GetXaxis().GetNbins()+1) :
val = p.GetBinContent(ibin)
valerr= p.GetBinError(ibin)
try :
tabtex += ' & '
fmtValue = toLatexRounded(val,valerr)
fmtValue = fmtValue.replace("[","(")
fmtValue = fmtValue.replace("]",")")
tabtex += fmtValue
except :
tabtex += ' & '
tabtex += '\\\\\n'
tabtex += '\\hline\n'
tabtex += '\\end{tabular}\n'
tabtex += '\\end{center}\n'
tabtex += '\\end{table}\n'
fileObj = open(outUrl,"w")
#fileObj.write(tabtex.Data())
fileObj.write(tabtex)
fileObj.close()
def getInTableFormat(tit,h,isData=False,addErrors=True):
tableRow='$'+tit+'$'
tableRow=tableRow.replace('#','\\')
tableRow=tableRow.replace(' ','~')
for ibin in xrange(1,h.GetXaxis().GetNbins()+1) :
val = h.GetBinContent(ibin)
valerr= h.GetBinError(ibin)
try:
tableRow += ' & '
fmtValue = str(int(val))
if(not isData) :
#fmtValue = '%3.0f' % val
#fmtValue += '$\\pm$'
#fmtValue += '%3.0f' % valerr
fmtValue = '%3.2f' % val
if(addErrors) :
fmtValue = toLatexRounded(val,valerr)
fmtValue = fmtValue.replace("[","(")
fmtValue = fmtValue.replace("]",")")
tableRow += fmtValue
except:
tableRow += ' & '
return tableRow
def buildSFbSummary(inF, title, outDir):
global SUMMARYCTR
SUMMARYCTR += 1
#read results from the pickle file
cachefile = open(inF, 'r')
fitInfo = pickle.load(cachefile)
effExpected = pickle.load(cachefile)
effObserved = pickle.load(cachefile)
sfbMeasurement = pickle.load(cachefile)
systUncs = pickle.load(cachefile)
effsystUncs = pickle.load(cachefile)
cachefile.close()
taggerDef = fitInfo['taggerDef']
taggerName = fitInfo['tagger']
nOPs = len(taggerDef) - 2
# see https://twiki.cern.ch/twiki/bin/viewauth/CMS/BTagCalibration#Example_code_in_Python
sliceVarName = fitInfo['slicevar']
btvCalib = ROOT.BTagCalibration(title) if sliceVarName == 'jetpt' else None
#prepare graphs
summaryGrs = {}
for summaryType in ['eff', 'sfb']:
for uncType in ['stat', 'total']:
for iop in xrange(1, nOPs):
if not iop in summaryGrs: summaryGrs[iop] = {}
key = (summaryType, uncType)
summaryGrs[iop][key] = ROOT.TGraphErrors()
summaryGrs[iop][key].SetName(
'%s_pass%d_%s_%s_%d' %
(taggerName, iop, summaryType, uncType, SUMMARYCTR))
summaryGrs[iop][key].SetTitle(title)
#print 'COLORS[(SUMMARYCTR-1)%4]: ', COLORS[(SUMMARYCTR-1)%4]
summaryGrs[iop][key].SetMarkerColor(COLORS[(SUMMARYCTR - 1) %
4])
summaryGrs[iop][key].SetLineColor(COLORS[(SUMMARYCTR - 1) % 4])
if uncType == 'total':
summaryGrs[iop][key].SetFillColor(COLORS[(SUMMARYCTR - 1) %
4])
summaryGrs[iop][key].SetFillStyle(3001 + SUMMARYCTR % 4)
summaryGrs[iop][key].SetMarkerStyle(1)
else:
summaryGrs[iop][key].SetFillColor(0)
summaryGrs[iop][key].SetFillStyle(0)
summaryGrs[iop][key].SetLineWidth(2)
summaryGrs[iop][key].SetMarkerSize(0.6)
summaryGrs[iop][key].SetMarkerStyle(
MARKERS[(SUMMARYCTR - 1) % 4])
#iterate over the results
table, plotsToInclude = [], []
for islice in effExpected[1]:
tablePerOp = {}
print 'Fit information: ', fitInfo
sliceVarMin, sliceVarMax = fitInfo['slicebins'][islice][0], fitInfo[
'slicebins'][islice][1]
sliceVarMean = 0.5 * (sliceVarMax + sliceVarMin)
sliceVarDx = 0.5 * (sliceVarMax - sliceVarMin)
#sliceVarMean = sliceVarMean+((SUMMARYCTR-1)%4-2)*sliceVarDx*0.1
for iop in xrange(1, len(taggerDef) - 2):
systTable = []
effExp, effExpUnc = effExpected[iop][islice]
effObs, effObsUnc = effObserved[iop][islice][0], effObserved[iop][
islice][1]
sfb, sfbStatUnc = sfbMeasurement[iop][islice]
sfbSystUnc = 0 #sfbStatUnc**2
effSystUnc = 0
for syst in systUncs[iop][islice]:
if len(syst) == 0: continue
if syst.endswith('dn'): continue
syst = syst[:-2]
sfbUncUp = systUncs[iop][islice][syst + 'up']
sfbUncDn = systUncs[iop][islice][syst + 'dn']
sfbSystUnc += (0.5 *
(math.fabs(sfbUncUp) + math.fabs(sfbUncDn)))**2
#systTable.append( ('~~~{\\small \\it %s}'%syst,'${\\small %.1g / %.1g }$'%(sfbUncUp,sfbUncDn)) )
systTable.append(('~~~{\\small \\it %s}' % syst,
'${ %.1g / %.1g }$' % (sfbUncUp, sfbUncDn)))
sfbSystUnc = math.sqrt(sfbSystUnc)
sfbTotalUnc = math.sqrt(sfbStatUnc**2 + sfbSystUnc**2)
#additional_flat_ttbar_sfbsysunc = sfbSystUnc * 1.5
#sfbTotalUnc=math.sqrt(sfbStatUnc**2+sfbSystUnc**2+additional_flat_ttbar_sfbsysunc**2)
for syst in effsystUncs[iop][islice]:
if len(syst) == 0: continue
if syst.endswith('dn'): continue
syst = syst[:-2]
effUncUp = effsystUncs[iop][islice][syst + 'up']
effUncDn = effsystUncs[iop][islice][syst + 'dn']
effSystUnc += (0.5 *
(math.fabs(effUncUp) + math.fabs(effUncDn)))**2
effSystUnc = math.sqrt(effSystUnc)
effTotalUnc = math.sqrt(effObsUnc**2 + effSystUnc**2)
#additional_flat_ttbar_effsysunc = effSystUnc * 1.5
#effTotalUnc=math.sqrt(effObsUnc**2+effSystUnc**2+additional_flat_ttbar_effsysunc**2)
#report
if sliceVarName == 'jetpt':
btvCalibParams = ROOT.BTagEntry.Parameters(
iop - 1, title, 'central', 0, -2.4, 2.4, sliceVarMin,
sliceVarMax, 0, 1)
entry = ROOT.BTagEntry(str(sfb), btvCalibParams)
btvCalib.addEntry(entry)
#btvCalibParams = ROOT.BTagEntry.Parameters(iop-1, title, 'up_total', 0, -2.4, 2.4, sliceVarMin,sliceVarMax,0,1)
btvCalibParams = ROOT.BTagEntry.Parameters(
iop - 1, title, 'up', 0, -2.4, 2.4, sliceVarMin,
sliceVarMax, 0, 1)
entry = ROOT.BTagEntry(str(sfb + sfbTotalUnc), btvCalibParams)
btvCalib.addEntry(entry)
#btvCalibParams = ROOT.BTagEntry.Parameters(iop-1, title, 'down_total', 0, -2.4, 2.4, sliceVarMin,sliceVarMax,0,1)
btvCalibParams = ROOT.BTagEntry.Parameters(
iop - 1, title, 'down', 0, -2.4, 2.4, sliceVarMin,
sliceVarMax, 0, 1)
entry = ROOT.BTagEntry(str(sfb - sfbTotalUnc), btvCalibParams)
btvCalib.addEntry(entry)
#btvCalibParams = ROOT.BTagEntry.Parameters(iop-1, title, 'up_statistics', 0, -2.4, 2.4, sliceVarMin,sliceVarMax,0,1)
btvCalibParams = ROOT.BTagEntry.Parameters(
iop - 1, title, 'up_statistic', 0, -2.4, 2.4, sliceVarMin,
sliceVarMax, 0, 1)
entry = ROOT.BTagEntry(str(sfb + sfbStatUnc), btvCalibParams)
btvCalib.addEntry(entry)
#btvCalibParams = ROOT.BTagEntry.Parameters(iop-1, title, 'down_statistics', 0, -2.4, 2.4, sliceVarMin,sliceVarMax,0,1)
btvCalibParams = ROOT.BTagEntry.Parameters(
iop - 1, title, 'down_statistic', 0, -2.4, 2.4,
sliceVarMin, sliceVarMax, 0, 1)
entry = ROOT.BTagEntry(str(sfb - sfbStatUnc), btvCalibParams)
btvCalib.addEntry(entry)
# fill table rows
tablePerOp[iop] = [('$\\varepsilon_{\\rm b}^{\\rm MC}$',
'%s' % toLatexRounded(effExp, effExpUnc)),
('$\\varepsilon_{\\rm b}^{\\rm obs}$',
'%s' % toLatexRounded(effObs, effObsUnc)),
('${\\rm SF}_{\\rm b}$', '%s' % toLatexRounded(
sfb, [sfbStatUnc, sfbSystUnc]))] + systTable
#add points to graphs
key = ('eff', 'stat')
np = summaryGrs[iop][key].GetN()
summaryGrs[iop][key].SetPoint(np, sliceVarMean, effObs)
summaryGrs[iop][key].SetPointError(np, sliceVarDx, effObsUnc)
key = ('eff', 'total')
summaryGrs[iop][key].SetPoint(np, sliceVarMean, effObs)
summaryGrs[iop][key].SetPointError(np, sliceVarDx, effTotalUnc)
key = ('sfb', 'stat')
summaryGrs[iop][key].SetPoint(np, sliceVarMean, sfb)
summaryGrs[iop][key].SetPointError(np, sliceVarDx, sfbStatUnc)
key = ('sfb', 'total')
summaryGrs[iop][key].SetPoint(np, sliceVarMean, sfb)
summaryGrs[iop][key].SetPointError(np, sliceVarDx, sfbTotalUnc)
sliceVarRangeText = '$%3.0f<%s<%3.0f$' % (
sliceVarMin, fitInfo['slicevar'], sliceVarMax)
table.append((sliceVarRangeText, tablePerOp))
plotsToInclude.append((
'Result of the fit to the %s disciminator for events with %s. The left (right) panel shows the pass (fail) category defined for events with %s$>$%s.'
% (title, sliceVarRangeText, taggerDef[0], taggerDef[iop + 1]),
'%s/%s_%d_slice%d.pdf' %
(os.path.dirname(inF), taggerName, iop, islice)))
#dump to file
if btvCalib:
with open('%s/%s_calib.csv' % (outDir, title), 'w') as f:
f.write(btvCalib.makeCSV())
#with open('%s/CSVv2_Kin.csv'%(outDir,title), 'w') as f : f.write(btvCalib.makeCSV())
return sliceVarName, summaryGrs, table, plotsToInclude
topRescaleFactor.GetXaxis().SetBinLabel(ipoint,reg[0])
if(otherYields[0][0]>0):
kOther=otherYields[1][0]/otherYields[0][0]
kOtherError=sqrt(pow(otherYields[1][0]*otherYields[0][1],2)
+pow(otherYields[0][0]*otherYields[1][1],2))/pow(otherYields[0][0],2)
otherRescaleFactor.SetBinContent(ipoint,kOther);
otherRescaleFactor.SetBinError(ipoint,kOtherError)
otherRescaleFactor.GetXaxis().SetBinLabel(ipoint,reg[0])
print '********* ' + reg[0] + ' *************'
print topRescaleFactor.GetXaxis().GetNbins()
topRescaleFactor.Fit(fitfunc,'RQ+')
try :
fmtValue = toLatexRounded(fitfunc.GetParameter(0),fitfunc.GetParError(0))
fmtValue = fmtValue.replace("[","(")
fmtValue = fmtValue.replace("]",")")
print 'top: ' + fmtValue,
except :
print 'top: n/a'
topRescalingHistos.Add(topRescaleFactor)
try :
otherRescaleFactor.Fit(fitfunc,'RQ+')
fmtValue = toLatexRounded(fitfunc.GetParameter(0),fitfunc.GetParError(0))
fmtValue = fmtValue.replace("[","(")
fmtValue = fmtValue.replace("]",")")
print ' others: ' + fmtValue
except:
print ' others: n/a'
if (otherYields[0][0] > 0):
kOther = otherYields[1][0] / otherYields[0][0]
kOtherError = sqrt(
pow(otherYields[1][0] * otherYields[0][1], 2) +
pow(otherYields[0][0] * otherYields[1][1], 2)) / pow(
otherYields[0][0], 2)
otherRescaleFactor.SetBinContent(ipoint, kOther)
otherRescaleFactor.SetBinError(ipoint, kOtherError)
otherRescaleFactor.GetXaxis().SetBinLabel(ipoint, reg[0])
print '********* ' + reg[0] + ' *************'
print topRescaleFactor.GetXaxis().GetNbins()
topRescaleFactor.Fit(fitfunc, 'RQ+')
try:
fmtValue = toLatexRounded(fitfunc.GetParameter(0),
fitfunc.GetParError(0))
fmtValue = fmtValue.replace("[", "(")
fmtValue = fmtValue.replace("]", ")")
print 'top: ' + fmtValue,
except:
print 'top: n/a'
topRescalingHistos.Add(topRescaleFactor)
try:
otherRescaleFactor.Fit(fitfunc, 'RQ+')
fmtValue = toLatexRounded(fitfunc.GetParameter(0),
fitfunc.GetParError(0))
fmtValue = fmtValue.replace("[", "(")
fmtValue = fmtValue.replace("]", ")")
print ' others: ' + fmtValue
except:
