def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_utilities.skeinforge_analyze.html', self)
self.fileNameInput = settings.FileNameInput().getFromFileName( [ ('Gcode text files', '*.gcode') ], 'Open File for Analyze', self, '')
importantFileNames = ['skeiniso', 'skeinlayer', 'statistic']
settings.getRadioPluginsAddPluginFrame( getPluginsDirectoryPath(), importantFileNames, getPluginFileNames(), self )
self.executeTitle = 'Analyze'
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository(
"skeinforge_application.skeinforge_plugins.craft_plugins.fillet.html", self
)
self.fileNameInput = settings.FileNameInput().getFromFileName(
fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), "Open File to be Filleted", self, ""
)
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute(
"http://www.bitsfrombytes.com/wiki/index.php?title=Skeinforge_Fillet"
)
self.activateFillet = settings.BooleanSetting().getFromValue("Activate Fillet", self, False)
self.filletProcedureChoiceLabel = settings.LabelDisplay().getFromName("Fillet Procedure Choice: ", self)
filletLatentStringVar = settings.LatentStringVar()
self.arcPoint = settings.Radio().getFromRadio(filletLatentStringVar, "Arc Point", self, False)
self.arcRadius = settings.Radio().getFromRadio(filletLatentStringVar, "Arc Radius", self, False)
self.arcSegment = settings.Radio().getFromRadio(filletLatentStringVar, "Arc Segment", self, False)
self.bevel = settings.Radio().getFromRadio(filletLatentStringVar, "Bevel", self, True)
self.cornerFeedRateOverOperatingFeedRate = settings.FloatSpin().getFromValue(
0.8, "Corner Feed Rate over Operating Feed Rate (ratio):", self, 1.2, 1.0
)
self.filletRadiusOverPerimeterWidth = settings.FloatSpin().getFromValue(
0.25, "Fillet Radius over Perimeter Width (ratio):", self, 0.65, 0.35
)
self.reversalSlowdownDistanceOverPerimeterWidth = settings.FloatSpin().getFromValue(
0.3, "Reversal Slowdown Distance over Perimeter Width (ratio):", self, 0.7, 0.5
)
self.useIntermediateFeedRateInCorners = settings.BooleanSetting().getFromValue(
"Use Intermediate Feed Rate in Corners", self, True
)
self.executeTitle = "Fillet"
def __init__(self):
"""Set the default settings, execute title & settings fileName."""
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.craft_plugins.carve.html', self )
self.fileNameInput = settings.FileNameInput().getFromFileName( fabmetheus_interpret.getTranslatorFileTypeTuples(), 'Open File for Carve', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute('http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Carve')
settings.LabelDisplay().getFromName('- MAIN SETTINGS for Extrusion -', self )
settings.LabelSeparator().getFromRepository(self)
self.extrusionHeight = settings.FloatSpin().getFromValue( 0.1, 'Layer Height = Extrusion Thickness (mm):', self, 1.0, 0.4 )
self.extrusionWidth = settings.FloatSpin().getFromValue( 0.2, 'Extrusion Width (mm):', self, 1.0, 0.6 )
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Layers to print -', self )
self.layersFrom = settings.IntSpin().getFromValue( 0, 'Print from Layer No::', self, 3333, 0 )
self.layersTo = settings.IntSpin().getSingleIncrementFromValue( 0, 'Print up to Layer No:', self, 912345678, 912345678 )
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Checked for technical parts, unchecked for organic pieces -', self )
self.infillInDirectionOfBridge = settings.BooleanSetting().getFromValue('Infill in Direction of Bridge', self, True )
settings.LabelSeparator().getFromRepository(self)
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Do not touch those below -', self )
settings.LabelSeparator().getFromRepository(self)
self.meshTypeLabel = settings.LabelDisplay().getFromName('Mesh Type: ', self )
importLatentStringVar = settings.LatentStringVar()
self.correctMesh = settings.Radio().getFromRadio( importLatentStringVar, 'Correct Mesh', self, True )
self.unprovenMesh = settings.Radio().getFromRadio( importLatentStringVar, 'Unproven Mesh', self, False )
self.svgViewer = settings.StringSetting().getFromValue('SVG Viewer:', self, 'webbrowser')
self.addLayerTemplateToSVG = settings.BooleanSetting().getFromValue('Add Layer Template to SVG', self, True)
self.extraDecimalPlaces = settings.FloatSpin().getFromValue(0.0, 'Extra Decimal Places (float):', self, 3.0, 2.0)
self.importCoarseness = settings.FloatSpin().getFromValue( 0.5, 'Import Coarseness (ratio):', self, 2.0, 1.0 )
settings.LabelSeparator().getFromRepository(self)
self.executeTitle = 'Carve'
def __init__( self ): "Set the default settings, execute title & settings fileName." skeinforge_profile.addListsToCraftTypeRepository( 'skeinforge_plugins.craft_plugins.flow.html', self ) self.fileNameInput = settings.FileNameInput().getFromFileName( fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Flow', self, '' ) self.activateFlow = settings.BooleanSetting().getFromValue( 'Activate Flow:', self, True ) self.flowRate = settings.FloatSpin().getFromValue( 50.0, 'Flow Rate (arbitrary units):', self, 250.0, 210.0 ) self.executeTitle = 'Flow'
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.analyze_plugins.comment.html', self)
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute('http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Comment')
self.activateComment = settings.BooleanSetting().getFromValue('Activate Comment', self, False )
self.fileNameInput = settings.FileNameInput().getFromFileName( [ ('Gcode text files', '*.gcode') ], 'Open File to Write Comments for', self, '')
self.executeTitle = 'Write Comments'
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_utilities.skeinforge_polyfile.html', self)
self.directoryOrFileChoiceLabel = settings.LabelDisplay().getFromName('Directory or File Choice: ', self )
directoryLatentStringVar = settings.LatentStringVar()
self.directorySetting = settings.Radio().getFromRadio( directoryLatentStringVar, 'Execute All Unmodified Files in a Directory', self, False )
self.fileSetting = settings.Radio().getFromRadio( directoryLatentStringVar, 'Execute File', self, True )
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository(
"skeinforge_application.skeinforge_plugins.craft_plugins.skin.html", self
)
self.fileNameInput = settings.FileNameInput().getFromFileName(
fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), "Open File for Skin", self, ""
)
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute(
"http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Skin"
)
self.activateSkin = settings.BooleanSetting().getFromValue("Activate Skin", self, False)
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName("- Division -", self)
self.horizontalInfillDivisions = settings.IntSpin().getSingleIncrementFromValue(
1, "Horizontal Infill Divisions (integer):", self, 3, 2
)
self.horizontalPerimeterDivisions = settings.IntSpin().getSingleIncrementFromValue(
1, "Horizontal Perimeter Divisions (integer):", self, 3, 1
)
self.verticalDivisions = settings.IntSpin().getSingleIncrementFromValue(
1, "Vertical Divisions (integer):", self, 3, 2
)
settings.LabelSeparator().getFromRepository(self)
self.hopWhenExtrudingInfill = settings.BooleanSetting().getFromValue("Hop When Extruding Infill", self, False)
self.layersFrom = settings.IntSpin().getSingleIncrementFromValue(0, "Layers From (index):", self, 912345678, 1)
self.executeTitle = "Skin"
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository(
"skeinforge_application.skeinforge_plugins.craft_plugins.chop.html", self
)
self.fileNameInput = settings.FileNameInput().getFromFileName(
fabmetheus_interpret.getTranslatorFileTypeTuples(), "Open File to be Chopped", self, ""
)
self.addExtraTopLayerIfNecessary = settings.BooleanSetting().getFromValue(
"Add Extra Top Layer if Necessary", self, True
)
self.addLayerTemplateToSVG = settings.BooleanSetting().getFromValue("Add Layer Template to SVG", self, True)
self.extraDecimalPlaces = settings.FloatSpin().getFromValue(
0.0, "Extra Decimal Places (float):", self, 3.0, 2.0
)
self.importCoarseness = settings.FloatSpin().getFromValue(0.5, "Import Coarseness (ratio):", self, 2.0, 1.0)
self.layerThickness = settings.FloatSpin().getFromValue(0.1, "Layer Thickness (mm):", self, 1.0, 0.4)
self.layersFrom = settings.IntSpin().getFromValue(0, "Layers From (index):", self, 20, 0)
self.layersTo = settings.IntSpin().getSingleIncrementFromValue(
0, "Layers To (index):", self, 912345678, 912345678
)
self.meshTypeLabel = settings.LabelDisplay().getFromName("Mesh Type: ", self)
importLatentStringVar = settings.LatentStringVar()
self.correctMesh = settings.Radio().getFromRadio(importLatentStringVar, "Correct Mesh", self, True)
self.unprovenMesh = settings.Radio().getFromRadio(importLatentStringVar, "Unproven Mesh", self, False)
self.perimeterWidth = settings.FloatSpin().getFromValue(0.4, "Perimeter Width (mm):", self, 4.0, 2.0)
settings.LabelSeparator().getFromRepository(self)
self.svgViewer = settings.StringSetting().getFromValue("SVG Viewer:", self, "webbrowser")
settings.LabelSeparator().getFromRepository(self)
self.executeTitle = "Chop"
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.craft_plugins.speed.html', self )
self.fileNameInput = settings.FileNameInput().getFromFileName( fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Speed', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute('http://www.bitsfrombytes.com/wiki/index.php?title=Skeinforge_Speed')
self.activateSpeed = settings.BooleanSetting().getFromValue('Activate Speed:', self, True )
self.addFlowRate = settings.BooleanSetting().getFromValue('Add Flow Rate:', self, True )
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Bridge -', self )
self.bridgeFeedRateMultiplier = settings.FloatSpin().getFromValue( 0.8, 'Bridge Feed Rate Multiplier (ratio):', self, 1.2, 1.0 )
self.bridgeFlowRateMultiplier = settings.FloatSpin().getFromValue( 0.8, 'Bridge Flow Rate Multiplier (ratio):', self, 1.2, 1.0 )
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Duty Cyle -', self )
self.dutyCycleAtBeginning = settings.FloatSpin().getFromValue( 0.0, 'Duty Cyle at Beginning (portion):', self, 1.0, 1.0 )
self.dutyCycleAtEnding = settings.FloatSpin().getFromValue( 0.0, 'Duty Cyle at Ending (portion):', self, 1.0, 0.0 )
settings.LabelSeparator().getFromRepository(self)
self.feedRatePerSecond = settings.FloatSpin().getFromValue( 2.0, 'Feed Rate (mm/s):', self, 50.0, 16.0 )
self.flowRateSetting = settings.FloatSpin().getFromValue( 50.0, 'Flow Rate Setting (float):', self, 250.0, 210.0 )
self.orbitalFeedRateOverOperatingFeedRate = settings.FloatSpin().getFromValue( 0.1, 'Orbital Feed Rate over Operating Feed Rate (ratio):', self, 0.9, 0.5 )
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Perimeter -', self )
self.perimeterFeedRateOverOperatingFeedRate = settings.FloatSpin().getFromValue( 0.5, 'Perimeter Feed Rate over Operating Feed Rate (ratio):', self, 1.0, 1.0 )
self.perimeterFlowRateOverOperatingFlowRate = settings.FloatSpin().getFromValue( 0.5, 'Perimeter Flow Rate over Operating Flow Rate (ratio):', self, 1.0, 1.0 )
settings.LabelSeparator().getFromRepository(self)
self.travelFeedRatePerSecond = settings.FloatSpin().getFromValue( 2.0, 'Travel Feed Rate (mm/s):', self, 50.0, 16.0 )
self.executeTitle = 'Speed'
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.craft_plugins.carve.html', self )
self.fileNameInput = settings.FileNameInput().getFromFileName( fabmetheus_interpret.getTranslatorFileTypeTuples(), 'Open File for Carve', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute('http://www.bitsfrombytes.com/wiki/index.php?title=Skeinforge_Carve')
self.addLayerTemplateToSVG = settings.BooleanSetting().getFromValue('Add Layer Template to SVG', self, True)
self.bridgeThicknessMultiplier = settings.FloatSpin().getFromValue( 0.8, 'Bridge Thickness Multiplier (ratio):', self, 1.2, 1.0 )
self.extraDecimalPlaces = settings.IntSpin().getFromValue( 0, 'Extra Decimal Places (integer):', self, 2, 1 )
self.importCoarseness = settings.FloatSpin().getFromValue( 0.5, 'Import Coarseness (ratio):', self, 2.0, 1.0 )
self.infillDirectionBridge = settings.BooleanSetting().getFromValue('Infill in Direction of Bridges', self, True )
self.layerThickness = settings.FloatSpin().getFromValue( 0.1, 'Layer Thickness (mm):', self, 1.0, 0.4 )
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Layers -', self )
self.layersFrom = settings.IntSpin().getFromValue( 0, 'Layers From (index):', self, 20, 0 )
self.layersTo = settings.IntSpin().getSingleIncrementFromValue( 0, 'Layers To (index):', self, 912345678, 912345678 )
settings.LabelSeparator().getFromRepository(self)
self.meshTypeLabel = settings.LabelDisplay().getFromName('Mesh Type: ', self )
importLatentStringVar = settings.LatentStringVar()
self.correctMesh = settings.Radio().getFromRadio( importLatentStringVar, 'Correct Mesh', self, True )
self.unprovenMesh = settings.Radio().getFromRadio( importLatentStringVar, 'Unproven Mesh', self, False )
self.perimeterWidthOverThickness = settings.FloatSpin().getFromValue( 1.4, 'Perimeter Width over Thickness (ratio):', self, 2.2, 1.8 )
settings.LabelSeparator().getFromRepository(self)
self.svgViewer = settings.StringSetting().getFromValue('SVG Viewer:', self, 'webbrowser')
settings.LabelSeparator().getFromRepository(self)
self.executeTitle = 'Carve'
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository(
"skeinforge_application.skeinforge_plugins.craft_plugins.multiply.html", self
)
self.fileNameInput = settings.FileNameInput().getFromFileName(
fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), "Open File for Multiply", self, ""
)
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute(
"http://www.bitsfrombytes.com/wiki/index.php?title=Skeinforge_Multiply"
)
self.activateMultiply = settings.BooleanSetting().getFromValue("Activate Multiply:", self, False)
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName("- Center -", self)
self.centerX = settings.FloatSpin().getFromValue(-100.0, "Center X (mm):", self, 100.0, 0.0)
self.centerY = settings.FloatSpin().getFromValue(-100.0, "Center Y (mm):", self, 100.0, 0.0)
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName("- Number of Cells -", self)
self.numberOfColumns = settings.IntSpin().getFromValue(1, "Number of Columns (integer):", self, 10, 1)
self.numberOfRows = settings.IntSpin().getFromValue(1, "Number of Rows (integer):", self, 10, 1)
settings.LabelSeparator().getFromRepository(self)
self.separationOverPerimeterWidth = settings.FloatSpin().getFromValue(
5.0, "Separation over Perimeter Width (ratio):", self, 25.0, 15.0
)
self.executeTitle = "Multiply"
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.craft_plugins.export.html', self )
self.fileNameInput = settings.FileNameInput().getFromFileName( fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Export', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute('http://www.bitsfrombytes.com/wiki/index.php?title=Skeinforge_Export')
self.activateExport = settings.BooleanSetting().getFromValue('Activate Export', self, True )
self.alsoSendOutputTo = settings.StringSetting().getFromValue('Also Send Output To:', self, '')
self.deleteComments = settings.BooleanSetting().getFromValue('Delete Comments', self, True )
exportPluginsFolderPath = archive.getAbsoluteFrozenFolderPath( __file__, 'export_plugins')
exportStaticDirectoryPath = os.path.join( exportPluginsFolderPath, 'static_plugins')
exportPluginFileNames = archive.getPluginFileNamesFromDirectoryPath( exportPluginsFolderPath )
exportStaticPluginFileNames = archive.getPluginFileNamesFromDirectoryPath( exportStaticDirectoryPath )
self.exportLabel = settings.LabelDisplay().getFromName('Export Operations: ', self )
self.exportPlugins = []
exportLatentStringVar = settings.LatentStringVar()
self.doNotChangeOutput = settings.RadioCapitalized().getFromRadio( exportLatentStringVar, 'Do Not Change Output', self, True )
self.doNotChangeOutput.directoryPath = None
allExportPluginFileNames = exportPluginFileNames + exportStaticPluginFileNames
for exportPluginFileName in allExportPluginFileNames:
exportPlugin = None
if exportPluginFileName in exportPluginFileNames:
path = os.path.join( exportPluginsFolderPath, exportPluginFileName )
exportPlugin = settings.RadioCapitalizedButton().getFromPath( exportLatentStringVar, exportPluginFileName, path, self, False )
exportPlugin.directoryPath = exportPluginsFolderPath
else:
exportPlugin = settings.RadioCapitalized().getFromRadio( exportLatentStringVar, exportPluginFileName, self, False )
exportPlugin.directoryPath = exportStaticDirectoryPath
self.exportPlugins.append( exportPlugin )
self.fileExtension = settings.StringSetting().getFromValue('File Extension:', self, 'gcode')
self.savePenultimateGcode = settings.BooleanSetting().getFromValue('Save Penultimate Gcode', self, False )
self.executeTitle = 'Export'
def __init__( self ):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository( 'skeinforge_tools.craft_plugins.oozestep.html', self )
self.fileNameInput = settings.FileNameInput().getFromFileName( fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), 'Open File for oozestep', self, '' )
self.activateoozestep = settings.BooleanSetting().getFromValue( 'Activate oozestep', self, False )
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Feedrates -', self )
#zFeed
self.zFeed = settings.FloatSpin().getFromValue( 4.0, 'Z feed (mm/s):', self, 34.0, 8.3 )
#first layer feed
self.firstLayerFeed = settings.FloatSpin().getFromValue( 4.0, 'First layer feed (mm/s):', self, 34.0, 25 )
#join paths - NOT USED
#self.joinPaths = settings.FloatSpin().getFromValue( 4.0, 'Join paths (mm):', self, 34.0, 2.0 )
#output G1
self.g_one = settings.BooleanSetting().getFromValue( 'Output G1 for linear feed moves', self, False )
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Extruder control -', self )
#first path press dist
self.firstPathPressDist = settings.FloatSpin().getFromValue( 4.0, 'First path press dist (mm):', self, 34.0, 30.0 )
#first path press feed
self.firstPathPressFeed = settings.FloatSpin().getFromValue( 4.0, 'First path press feed (mm/s):', self, 34.0, 30.0 )
#first path each layer press dist
self.firstLayerPathPressDist = settings.FloatSpin().getFromValue( 4.0, 'First layer path press dist (mm):', self, 34.0, 30.0 )
#next path press xy
self.nextPathPressXY = settings.FloatSpin().getFromValue( 4.0, 'Next path press XY (mm):', self, 34.0, 0.4 )
#extruder early stop xy
self.extruderEarlyStopXY = settings.FloatSpin().getFromValue( 4.0, 'Extruder early stop XY (mm):', self, 34.0, 0.4 )
#extruder oozestep feed
#set in Dimension plugin
#extrusion multiplier - NOT USED
#self.extrusionMultiplier = settings.FloatSpin().getFromValue( 0, 'Extrusion multiplier:', self, 255, 1.0 )
self.tempAtLayer = settings.StringSetting().getFromValue('Bed T at layer, (Layer,Temp;Layer,Temp;...):', self, '4,120;7,110;10,100' )
#Create the archive, title of the execute button, title of the dialog & settings fileName.
self.executeTitle = 'oozestep'
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.craft_plugins.whittle.html', self )
self.fileNameInput = settings.FileNameInput().getFromFileName( fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), 'Open File to be Whittled', self, '')
self.activateWhittle = settings.BooleanSetting().getFromValue('Activate Whittle', self, False )
self.maximumVerticalStep = settings.FloatSpin().getFromValue( 0.02, 'Maximum Vertical Step (mm):', self, 0.42, 0.1 )
self.executeTitle = 'Whittle'
def __init__(self):
'Set the default settings, execute title & settings fileName.'
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.craft_plugins.outset.html', self )
self.outsetInnerMagic = settings.FloatSpin().getFromValue( 0.01, 'Outset inner magic mult:', self, 1.0, 1.0 )
self.fileNameInput = settings.FileNameInput().getFromFileName( fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Outset', self, '')
self.activateOutset = settings.BooleanSetting().getFromValue('Activate Outset', self, True )
self.executeTitle = 'Outset'
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_utilities.skeinforge_help.html', self)
settings.LabelDisplay().getFromName('- Announcements -', self )
settings.LabelDisplay().getFromName('Fabmetheus Blog, Skeinforge Announcements & Questions:', self )
settings.HelpPage().getFromNameAfterHTTP('fabmetheus.blogspot.com/', 'Fabmetheus Blog', self )
settings.LabelDisplay().getFromName('RepRap for Dummies website:', self )
settings.HelpPage().getFromNameAfterHTTP('www.reprapfordummies.net/', 'reprapfordummies.net', self )
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Documentation -', self )
settings.LabelDisplay().getFromName('Local Documentation Table of Contents: ', self )
settings.HelpPage().getFromNameSubName('Contents', self, 'contents.html')
settings.LabelDisplay().getFromName('Wiki Manual with Pictures & Charts: ', self )
settings.HelpPage().getFromNameAfterHTTP('fabmetheus.crsndoo.com/wiki/index.php/Skeinforge', 'Wiki Manual', self )
settings.LabelDisplay().getFromName('Skeinforge Overview: ', self )
settings.HelpPage().getFromNameSubName('Skeinforge Overview', self, 'skeinforge_application.skeinforge.html')
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Forums -', self )
settings.LabelDisplay().getFromName('Skeinforge/SFACT Forum:', self )
settings.HelpPage().getFromNameAfterWWW('forums.reprap.org/list.php?154', 'Skeinforge/SFACT', self )
settings.LabelDisplay().getFromName('Getting Started with the RepRap:', self )
settings.HelpPage().getFromNameAfterHTTP('oreilly.com/catalog/0636920021537', 'RepRap Book', self )
settings.LabelDisplay().getFromName('moving to Skeinforge 40 and later:', self )
settings.HelpPage().getFromNameAfterHTTP('forums.reprap.org/read.php?154,75635,77156#msg-77156', 'Skeinforge 40 and over', self )
settings.LabelDisplay().getFromName('Extruder Calibration:', self )
settings.HelpPage().getFromNameAfterHTTP('www.reprapfordummies.net/index.php/anything-that-can-not-be-downloaded-or-sent-by-email/34-introduction/54-volumetriccalibration', 'Extruder Calibration', self )
settings.LabelDisplay().getFromName('Skeinforge Settings Thread:', self )
settings.HelpPage().getFromNameAfterHTTP('dev.forums.reprap.org/read.php?12,27434', 'Skeinforge Settings Thread', self )
settings.LabelSeparator().getFromRepository(self)
self.wikiManualPrimary = settings.BooleanSetting().getFromValue('Wiki Manual Primary', self, True )
self.wikiManualPrimary.setUpdateFunction( self.save )
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.analyze_plugins.skeinlayer.html', self)
self.baseNameSynonym = 'skeinview.csv'
self.fileNameInput = settings.FileNameInput().getFromFileName( [ ('Gcode text files', '*.gcode') ], 'Open File for Skeinlayer', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute('http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Skeinlayer')
self.activateSkeinlayer = settings.BooleanSetting().getFromValue('Activate Skeinlayer', self, True )
self.addAnimation()
self.drawArrows = settings.BooleanSetting().getFromValue('Draw Arrows', self, True )
self.goAroundExtruderOffTravel = settings.BooleanSetting().getFromValue('Go Around Extruder Off Travel', self, False )
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Layers -', self )
self.layer = settings.IntSpinNotOnMenu().getSingleIncrementFromValue( 0, 'Layer (index):', self, 912345678, 0 )
self.layerExtraSpan = settings.IntSpinUpdate().getSingleIncrementFromValue( - 3, 'Layer Extra Span (integer):', self, 3, 0 )
settings.LabelSeparator().getFromRepository(self)
self.line = settings.IntSpinNotOnMenu().getSingleIncrementFromValue( 0, 'Line (index):', self, 912345678, 0 )
self.mouseMode = settings.MenuButtonDisplay().getFromName('Mouse Mode:', self )
self.displayLine = settings.MenuRadio().getFromMenuButtonDisplay( self.mouseMode, 'Display Line', self, True )
self.viewMove = settings.MenuRadio().getFromMenuButtonDisplay( self.mouseMode, 'View Move', self, False )
self.addScaleScreenSlide()
self.showPosition = settings.BooleanSetting().getFromValue('Show Position', self, True )
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Width -', self )
self.widthOfExtrusionThread = settings.IntSpinUpdate().getSingleIncrementFromValue( 0, 'Width of Extrusion Thread (pixels):', self, 5, 3 )
self.widthOfSelectionThread = settings.IntSpinUpdate().getSingleIncrementFromValue( 0, 'Width of Selection Thread (pixels):', self, 10, 6 )
self.widthOfTravelThread = settings.IntSpinUpdate().getSingleIncrementFromValue( 0, 'Width of Travel Thread (pixels):', self, 5, 1 )
self.executeTitle = 'Skeinlayer'
def __init__(self):
"""Set the default settings, execute title & settings fileName."""
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.craft_plugins.comb.html', self )
self.fileNameInput = settings.FileNameInput().getFromFileName( fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Comb', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute('http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Comb')
self.activateComb = settings.BooleanSetting().getFromValue('Activate Comb if you cant stop the extruder stringing', self, True )
self.executeTitle = 'Comb'
def __init__(self):
'Set the default settings, execute title & settings fileName.'
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.craft_plugins.dimension.html', self)
self.fileNameInput = settings.FileNameInput().getFromFileName(fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Dimension', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute('http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Dimension')
self.activateDimension = settings.BooleanSetting().getFromValue('Activate Dimension', self, False)
extrusionDistanceFormatLatentStringVar = settings.LatentStringVar()
self.extrusionDistanceFormatChoiceLabel = settings.LabelDisplay().getFromName('Extrusion Distance Format Choice: ', self)
settings.Radio().getFromRadio(extrusionDistanceFormatLatentStringVar, 'Absolute Extrusion Distance', self, True)
self.relativeExtrusionDistance = settings.Radio().getFromRadio(extrusionDistanceFormatLatentStringVar, 'Relative Extrusion Distance', self, False)
self.extruderRetractionSpeed = settings.FloatSpin().getFromValue(4.0, 'Extruder Retraction Speed (mm/s):', self, 34.0, 13.3)
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Filament -', self)
self.filamentDiameter = settings.FloatSpin().getFromValue(1.0, 'Filament Diameter (mm):', self, 6.0, 2.8)
self.filamentPackingDensity = settings.FloatSpin().getFromValue(0.7, 'Filament Packing Density (ratio):', self, 1.0, 0.85)
settings.LabelSeparator().getFromRepository(self)
self.maximumEValueBeforeReset = settings.FloatSpin().getFromValue(0.0, 'Maximum E Value before Reset (float):', self, 999999.9, 91234.0)
self.minimumTravelForRetraction = settings.FloatSpin().getFromValue(0.0, 'Minimum Travel for Retraction (millimeters):', self, 2.0, 1.0)
self.retractWithinIsland = settings.BooleanSetting().getFromValue('Retract Within Island', self, False)
self.retractionDistance = settings.FloatSpin().getFromValue(0.0, 'Retraction Distance (millimeters):', self, 100.0, 0.0)
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Restart -', self)
self.layerExtraDistance = settings.FloatSpin().getFromValue(-1.0, 'Layer Extra Distance (millimeters):', self, 3.0, 0.0)
self.restartExtraDistance = settings.FloatSpin().getFromValue(-1.0, 'Restart Extra Distance (millimeters):', self, 3.0, 0.0)
self.executeTitle = 'Dimension'
def __init__(self):
'Set the default settings, execute title & settings fileName.'
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.craft_plugins.cool.html', self )
self.fileNameInput = settings.FileNameInput().getFromFileName(
fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Cool', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute(
'http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Cool')
self.activateCool = settings.BooleanSetting().getFromValue('Activate Cool', self, True)
self.bridgeCool = settings.FloatSpin().getFromValue(0.0, 'Bridge Cool (Celcius):', self, 10.0, 1.0)
self.coolType = settings.MenuButtonDisplay().getFromName('Cool Type:', self)
self.orbit = settings.MenuRadio().getFromMenuButtonDisplay(self.coolType, 'Orbit', self, False)
self.slowDown = settings.MenuRadio().getFromMenuButtonDisplay(self.coolType, 'Slow Down', self, True)
self.maximumCool = settings.FloatSpin().getFromValue(0.0, 'Maximum Cool (Celcius):', self, 10.0, 2.0)
self.minimumLayerTime = settings.FloatSpin().getFromValue(0.0, 'Minimum Layer Time (seconds):', self, 120.0, 10.0)
self.minimumOrbitalRadius = settings.FloatSpin().getFromValue(
0.0, 'Minimum Orbital Radius (millimeters):', self, 20.0, 10.0)
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Name of Alteration Files -', self )
self.nameOfCoolEndFile = settings.StringSetting().getFromValue('Name of Cool End File:', self, 'cool_end.gcode')
self.nameOfCoolStartFile = settings.StringSetting().getFromValue('Name of Cool Start File:', self, 'cool_start.gcode')
settings.LabelSeparator().getFromRepository(self)
self.orbitalOutset = settings.FloatSpin().getFromValue(1.0, 'Orbital Outset (millimeters):', self, 5.0, 2.0)
self.turnFanOnAtBeginning = settings.BooleanSetting().getFromValue('Turn Fan On at Beginning', self, True)
self.turnFanOffAtEnding = settings.BooleanSetting().getFromValue('Turn Fan Off at Ending', self, True)
self.executeTitle = 'Cool'
self.minimumFeedRate = settings.FloatSpin().getFromValue(0.0, 'Minimum feed rate (mm/s):', self, 10.0, 5.0)
self.fanTurnOnLayerNr = settings.IntSpin().getFromValue(0, 'Fan on at layer:', self, 100, 0)
self.fanSpeedMin = settings.IntSpin().getFromValue(0, 'Fan speed min (%):', self, 100, 100)
self.fanSpeedMax = settings.IntSpin().getFromValue(0, 'Fan speed max (%):', self, 100, 100)
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.craft_plugins.coil.html', self )
self.fileNameInput = settings.FileNameInput().getFromFileName( fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Coil', self, '')
self.activateCoil = settings.BooleanSetting().getFromValue('Activate Coil', self, True )
self.minimumToolDistance = settings.FloatSpin().getFromValue( 10.0, 'Minimum Tool Distance (millimeters):', self, 50.0, 20.0 )
self.executeTitle = 'Coil'
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository(
"skeinforge_application.skeinforge_plugins.meta_plugins.description.html", self
)
description = "Write your description of the profile here.\n\nSuggested format is a description, followed by a link to the profile post or web page."
self.descriptionText = settings.TextSetting().getFromValue("Description Text:", self, description)
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_utilities.skeinforge_help.html', self)
announcementsText = '- Announcements - '
announcementsLabel = settings.LabelDisplay().getFromName(announcementsText, self )
announcementsLabel.columnspan = 6
settings.LabelDisplay().getFromName('Fabmetheus Blog, Announcements & Questions:', self )
settings.HelpPage().getFromNameAfterHTTP('fabmetheus.blogspot.com/', 'Fabmetheus Blog', self )
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Documentation -', self )
settings.LabelDisplay().getFromName('Local Documentation Table of Contents: ', self )
settings.HelpPage().getFromNameSubName('Contents', self, 'contents.html')
settings.LabelDisplay().getFromName('Wiki Manual with Pictures & Charts: ', self )
settings.HelpPage().getFromNameAfterHTTP('fabmetheus.crsndoo.com/wiki/index.php/Skeinforge', 'Wiki Manual', self )
settings.LabelDisplay().getFromName('Skeinforge Overview: ', self )
settings.HelpPage().getFromNameSubName('Skeinforge Overview', self, 'skeinforge_application.skeinforge.html')
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Search -', self )
settings.LabelDisplay().getFromName('Reprap Search:', self )
settings.HelpPage().getFromNameAfterHTTP('members.axion.net/~enrique/search_reprap.html', 'Reprap Search', self )
settings.LabelDisplay().getFromName('Skeinforge Search:', self )
settings.HelpPage().getFromNameAfterHTTP('members.axion.net/~enrique/search_skeinforge.html', 'Skeinforge Search', self )
settings.LabelDisplay().getFromName('Web Search:', self )
settings.HelpPage().getFromNameAfterHTTP('members.axion.net/~enrique/search_web.html', 'Web Search', self )
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Troubleshooting -', self )
settings.LabelDisplay().getFromName('Skeinforge Forum:', self)
settings.HelpPage().getFromNameAfterHTTP('forums.reprap.org/list.php?154', ' Skeinforge Forum ', self )
settings.LabelSeparator().getFromRepository(self)
self.version = settings.LabelDisplay().getFromName('Version: ' + archive.getFileText(archive.getVersionFileName()), self)
self.wikiManualPrimary = settings.BooleanSetting().getFromValue('Wiki Manual Primary', self, True )
self.wikiManualPrimary.setUpdateFunction( self.save )
def __init__( self ): "Set the default settings, execute title & settings fileName." skeinforge_profile.addListsToCraftTypeRepository( 'skeinforge_tools.craft_plugins.outline.html', self ) self.fileNameInput = settings.FileNameInput().getFromFileName( fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Outline', self, '' ) self.activateOutline = settings.BooleanSetting().getFromValue( 'Activate Outline', self, False ) self.outlineMargin = settings.FloatSpin().getFromValue( 0.5, 'Outline Margin:', self, 20.0, 3.0 ) self.executeTitle = 'Outline'
def __init__( self ): "Set the default settings, execute title & settings fileName." skeinforge_profile.addListsToCraftTypeRepository( 'skeinforge_tools.craft_plugins.altshell.html', self ) self.fileNameInput = settings.FileNameInput().getFromFileName( fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Altshell', self, '' ) self.activateAltshell = settings.BooleanSetting().getFromValue( 'Activate Altshell', self, False) self.useM320M321 = settings.BooleanSetting().getFromValue( 'Use M320/M321', self, False ) self.executeTitle = 'Altshell'
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.craft_plugins.carve.html', self )
self.fileNameInput = settings.FileNameInput().getFromFileName( fabmetheus_interpret.getTranslatorFileTypeTuples(), 'Open File for Carve', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute('http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Carve')
self.addLayerTemplateToSVG = settings.BooleanSetting().getFromValue('Add Layer Template to SVG', self, True)
self.edgeWidth = settings.FloatSpin().getFromValue( 0.1, 'Edge Width (mm):', self, 2.2, 0.4 )
self.extraDecimalPlaces = settings.FloatSpin().getFromValue(0.0, 'Extra Decimal Places (float):', self, 3.0, 2.0)
self.importCoarseness = settings.FloatSpin().getFromValue( 0.5, 'Import Coarseness (ratio):', self, 2.0, 1.0 )
self.layerHeight = settings.FloatSpin().getFromValue( 0.1, 'Layer Height (mm):', self, 1.0, 0.2 )
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Layers -', self )
self.layersFrom = settings.IntSpin().getFromValue( 0, 'Layers From (index):', self, 20, 0 )
self.layersTo = settings.IntSpin().getSingleIncrementFromValue( 0, 'Layers To (index):', self, 912345678, 912345678 )
settings.LabelSeparator().getFromRepository(self)
self.meshTypeLabel = settings.LabelDisplay().getFromName('Mesh Type: ', self )
importLatentStringVar = settings.LatentStringVar()
self.correctMesh = settings.Radio().getFromRadio( importLatentStringVar, 'Correct Mesh', self, True )
self.unprovenMesh = settings.Radio().getFromRadio( importLatentStringVar, 'Unproven Mesh', self, False )
self.svgViewer = settings.StringSetting().getFromValue('SVG Viewer:', self, 'webbrowser')
settings.LabelSeparator().getFromRepository(self)
self.executeTitle = 'Carve'
self.flipX = settings.BooleanSetting().getFromValue('FlipX', self, False)
self.flipY = settings.BooleanSetting().getFromValue('FlipY', self, False)
self.flipZ = settings.BooleanSetting().getFromValue('FlipZ', self, False)
self.swapXZ = settings.BooleanSetting().getFromValue('SwapXZ', self, False)
self.swapYZ = settings.BooleanSetting().getFromValue('SwapYZ', self, False)
self.centerX = settings.FloatSpin().getFromValue(0.0, 'CenterX', self, 1000.0, 0.0)
self.centerY = settings.FloatSpin().getFromValue(0.0, 'CenterY', self, 1000.0, 0.0)
self.scale = settings.FloatSpin().getFromValue( 0.1, 'Scale', self, 10.0, 1.0 )
self.rotate = settings.FloatSpin().getFromValue( -180.0, 'Rotate', self, 180.0, 0.0 )
self.alternativeCenter = settings.StringSetting().getFromValue('AlternativeCenterFile', self, '')
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository(
"skeinforge_application.skeinforge_plugins.craft_plugins.wipe.html", self
)
self.fileNameInput = settings.FileNameInput().getFromFileName(
fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), "Open File for Wipe", self, ""
)
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute(
"http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Wipe"
)
self.activateWipe = settings.BooleanSetting().getFromValue("Activate Wipe", self, False)
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName("- Arrival Location -", self)
self.locationArrivalX = settings.FloatSpin().getFromValue(-100.0, "Arrival X (mm):", self, 100.0, -70.0)
self.locationArrivalY = settings.FloatSpin().getFromValue(-100.0, "Arrival Y (mm):", self, 100.0, -50.0)
self.locationArrivalZ = settings.FloatSpin().getFromValue(-100.0, "Arrival Z (mm):", self, 100.0, 50.0)
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName("- Departure Location -", self)
self.locationDepartureX = settings.FloatSpin().getFromValue(-100.0, "Departure X (mm):", self, 100.0, -70.0)
self.locationDepartureY = settings.FloatSpin().getFromValue(-100.0, "Departure Y (mm):", self, 100.0, -40.0)
self.locationDepartureZ = settings.FloatSpin().getFromValue(-100.0, "Departure Z (mm):", self, 100.0, 50.0)
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName("- Wipe Location -", self)
self.locationWipeX = settings.FloatSpin().getFromValue(-100.0, "Wipe X (mm):", self, 100.0, -70.0)
self.locationWipeY = settings.FloatSpin().getFromValue(-100.0, "Wipe Y (mm):", self, 100.0, -70.0)
self.locationWipeZ = settings.FloatSpin().getFromValue(-100.0, "Wipe Z (mm):", self, 100.0, 50.0)
settings.LabelSeparator().getFromRepository(self)
self.wipePeriod = settings.IntSpin().getFromValue(1, "Wipe Period (layers):", self, 5, 3)
self.executeTitle = "Wipe"
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository("skeinforge_plugins.craft_plugins.oozebane.html", self)
self.fileNameInput = settings.FileNameInput().getFromFileName(
fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), "Open File for Oozebane", self, ""
)
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute(
"http://www.bitsfrombytes.com/wiki/index.php?title=Skeinforge_Oozebane"
)
self.activateOozebane = settings.BooleanSetting().getFromValue("Activate Oozebane", self, False)
self.afterStartupDistance = settings.FloatSpin().getFromValue(
0.7, "After Startup Distance (millimeters):", self, 1.7, 1.2
)
self.earlyShutdownDistance = settings.FloatSpin().getFromValue(
0.7, "Early Shutdown Distance (millimeters):", self, 1.7, 1.2
)
self.earlyStartupDistanceConstant = settings.FloatSpin().getFromValue(
10.0, "Early Startup Distance Constant (millimeters):", self, 30.0, 20.0
)
self.earlyStartupMaximumDistance = settings.FloatSpin().getFromValue(
0.7, "Early Startup Maximum Distance (millimeters):", self, 1.7, 1.2
)
self.firstEarlyStartupDistance = settings.FloatSpin().getFromValue(
5.0, "First Early Startup Distance (millimeters):", self, 45.0, 25.0
)
self.minimumDistanceForEarlyStartup = settings.FloatSpin().getFromValue(
0.0, "Minimum Distance for Early Startup (millimeters):", self, 10.0, 0.0
)
self.minimumDistanceForEarlyShutdown = settings.FloatSpin().getFromValue(
0.0, "Minimum Distance for Early Shutdown (millimeters):", self, 10.0, 0.0
)
self.slowdownStartupSteps = settings.IntSpin().getFromValue(
2, "Slowdown Startup Steps (positive integer):", self, 5, 3
)
self.executeTitle = "Oozebane"
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.craft_plugins.widen.html', self )
self.fileNameInput = settings.FileNameInput().getFromFileName( fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Widen', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute('http://www.bitsfrombytes.com/wiki/index.php?title=Skeinforge_Widen')
self.activateWiden = settings.BooleanSetting().getFromValue('Activate Widen:', self, False )
self.executeTitle = 'Widen'
def __init__(self):
'Set the default settings, execute title & settings fileName.'
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.craft_plugins.dimension.html', self )
self.fileNameInput = settings.FileNameInput().getFromFileName( fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Dimension', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute('http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Dimension')
self.activateDimension = settings.BooleanSetting().getFromValue('Activate Volumetric Extrusion (Stepper driven Extruders)', self, True )
extrusionDistanceFormatLatentStringVar = settings.LatentStringVar()
self.extrusionDistanceFormatChoiceLabel = settings.LabelDisplay().getFromName('Extrusion Distance Format Choice: ', self )
settings.Radio().getFromRadio( extrusionDistanceFormatLatentStringVar, 'Absolute Extrusion Distance', self, True )
self.relativeExtrusionDistance = settings.Radio().getFromRadio( extrusionDistanceFormatLatentStringVar, 'Relative Extrusion Distance', self, False )
self.extruderRetractionSpeed = settings.FloatSpin().getFromValue( 10, 'Extruder Retraction Speed (mm/s):', self, 50, 30 )
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Filament -', self )
self.filamentDiameter = settings.FloatSpin().getFromValue(1.0, 'Filament Diameter (mm):', self, 6.0, 2.8)
# self.filamentPackingDensity = settings.FloatSpin().getFromValue(0.5, 'E-Steps corrector:', self, 1.5, 1.0)
self.filamentPackingDensityx = settings.FloatSpin().getFromValue(-0.25, 'Add/remove to actual extrusion width (mm):', self, 0.25, 0.0)
# self.activateCalibration = settings.BooleanSetting().getFromValue('Are You Calibrating?', self, False )
# self.MeasuredXSection = settings.FloatSpin().getFromValue(0.20, 'Measured Width of Extrusion:', self, 2.0, 0.5)
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Filament Retraction Settings -', self )
self.maximumEValueBeforeReset = settings.FloatSpin().getFromValue(0.0, 'Maximum E Value before Reset (float):', self, 999999.9, 91234.0)
self.minimumTravelForRetraction = settings.FloatSpin().getFromValue(0.0, 'Minimum Travelmove after Retraction (millimeters):', self, 10.0, 4.0)
self.retractWithinIsland = settings.BooleanSetting().getFromValue('Retract Within Island', self, False)
self.retractionDistance = settings.FloatSpin().getFromValue( 0.0, 'Retraction Distance (millimeters):', self, 3.0, 1.0 )
self.restartExtraDistance = settings.FloatSpin().getFromValue( 0.0, 'Restart Extra Distance (millimeters):', self, 1.0, 0.1 )
self.executeTitle = 'Dimension'
def __init__(self):
'Set the default settings, execute title & settings fileName.'
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.craft_plugins.jitter.html', self)
self.fileNameInput = settings.FileNameInput().getFromFileName( fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Jitter', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute('http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Jitter')
self.activateJitter = settings.BooleanSetting().getFromValue('Activate Jitter', self, False)
self.jitterOverEdgeWidth = settings.FloatSpin().getFromValue(1.0, 'Jitter Over Perimeter Width (ratio):', self, 3.0, 2.0)
self.executeTitle = 'Jitter'
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository(
'skeinforge_application.skeinforge_plugins.craft_plugins.speed.html',
self)
self.fileNameInput = settings.FileNameInput().getFromFileName(
fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(),
'Open File for Speed', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute(
'http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Speed')
self.activateSpeed = settings.BooleanSetting().getFromValue(
'Activate Speed:', self, True)
self.addFlowRate = settings.BooleanSetting().getFromValue(
'Add Flow Rate:', self, True)
self.addAccelerationRate = settings.BooleanSetting().getFromValue(
'Add Acceleration Rate:', self, False)
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Main Feedrate Settings -', self)
self.feedRatePerSecond = settings.FloatSpin().getFromValue(
20, 'Main Feed Rate (mm/s):', self, 140, 60)
self.flowRateSetting = settings.FloatSpin().getFromValue(
0.5, 'Main Flow Rate (scaler):', self, 1.5, 1.0)
self.AccelerationRateSetting = settings.FloatSpin().getFromValue(
500, 'Main Acceleration Rate for Extruder (mm/s2):', self, 10000,
1300)
self.orbitalFeedRateOverOperatingFeedRate = settings.FloatSpin(
).getFromValue(0.1, 'Feed Rate ratio for Orbiting move (ratio):', self,
0.9, 0.5)
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Perimeter Printing -', self)
self.perimeterFeedRateOverOperatingFeedRate = settings.FloatSpin(
).getFromValue(20, 'Perimeter Feed Rate (mm/s):', self, 80, 30)
self.perimeterFlowRateOverOperatingFlowRate = settings.FloatSpin(
).getFromValue(0.5, 'Perimeter Flow Rate (scaler):', self, 1.5, 1.0)
self.perimeterAccelerationRate = settings.FloatSpin().getFromValue(
5, 'Perimeter Acceleration Rate for Extruder (mm/s2):', self,
10000, 50)
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Bridge Layers -', self)
self.bridgeFeedRateMultiplier = settings.FloatSpin().getFromValue(
0.5, 'Bridge Feed Rate (ratio to Perim.feed):', self, 1.5, 1.0)
self.bridgeFlowRateMultiplier = settings.FloatSpin().getFromValue(
0.5, 'Bridge Flow Rate (scaler):', self, 1.3, 1.0)
self.bridgeAccelerationRate = settings.FloatSpin().getFromValue(
10, 'Bridge Acceleration Rate for Extruder(mm/s2):', self, 10000,
1000)
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Perimeter -', self)
settings.LabelSeparator().getFromRepository(self)
self.travelFeedRatePerSecond = settings.FloatSpin().getFromValue(
40, 'Travel Feed Rate (mm/s):', self, 300, 130)
settings.LabelDisplay().getFromName(
'- Duty Cyle for DC extruders only -', self)
self.dutyCycleAtBeginning = settings.FloatSpin().getFromValue(
0.0, 'Duty Cyle at Beginning (portion):', self, 1.0, 1.0)
self.dutyCycleAtEnding = settings.FloatSpin().getFromValue(
0.0, 'Duty Cyle at Ending (portion):', self, 1.0, 0.0)
self.executeTitle = 'Speed'
def __init__(self):
'Set the default settings, execute title & settings fileName.'
skeinforge_profile.addListsToCraftTypeRepository(
'skeinforge_application.skeinforge_plugins.craft_plugins.dcflow.html',
self)
self.fileNameInput = settings.FileNameInput().getFromFileName(
fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(),
'Open File for Dcflow', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute(
'http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Dcflow')
self.activateDcflow = settings.BooleanSetting().getFromValue(
'Activate Dcflow', self, False)
self.activateDCExtruderFlowScale = settings.BooleanSetting(
).getFromValue('Activate DC Extruder Flow scaling (DC Extruders)',
self, True)
settings.LabelSeparator().getFromRepository(self)
self.filamentDiameter = settings.FloatSpin().getFromValue(
1.5, 'Filament Diameter (mm):', self, 3.5, 2.8)
self.filamentPackingDensity = settings.FloatSpin().getFromValue(
0.7, 'Extruder Flow Correction (ratio) lower=more extrusion:',
self, 1.0, 1.00)
self.activateCalibration = settings.BooleanSetting().getFromValue(
'Are You Calibrating?', self, False)
self.MeasuredXSection = settings.FloatSpin().getFromValue(
0.20, 'Measured Width of Extrusion:', self, 2.0, 0.5)
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Fighting Oooze -', self)
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Filament Retraction Settings -',
self)
self.retractionDistance = settings.FloatSpin().getFromValue(
0.00, 'Retraction Distance (millimeters):', self, 3.00, 1.00)
self.restartExtraDistance = settings.FloatSpin().getFromValue(
-0.50, 'Restart Extra Distance (millimeters):', self, 0.50, 0.00)
self.extruderRetractionSpeed = settings.FloatSpin().getFromValue(
5.0, 'Extruder Retraction Speed (mm/s):', self, 50.0, 15.0)
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- When to retract ? -', self)
self.retractWhenCrossing = settings.BooleanSetting().getFromValue(
'Force to retract when crossing over spaces', self, True)
self.minimumExtrusionForRetraction = settings.FloatSpin().getFromValue(
0.0, 'Minimum Extrusion before Retraction (millimeters):', self,
2.0, 1.0)
self.minimumTravelForRetraction = settings.FloatSpin().getFromValue(
0.0, 'Minimum Travelmove after Retraction (millimeters):', self,
2.0, 1.0)
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Firmware Related Stuff -', self)
extrusionDistanceFormatLatentStringVar = settings.LatentStringVar()
self.extrusionDistanceFormatChoiceLabel = settings.LabelDisplay(
).getFromName('Extrusion Values should be: ', self)
settings.Radio().getFromRadio(extrusionDistanceFormatLatentStringVar,
'in Absolute units', self, True)
self.relativeExtrusionDistance = settings.Radio().getFromRadio(
extrusionDistanceFormatLatentStringVar, 'in Relative units', self,
False)
settings.LabelSeparator().getFromRepository(self)
self.executeTitle = 'Dcflow'
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository(
'skeinforge_application.skeinforge_utilities.skeinforge_help.html',
self)
settings.LabelDisplay().getFromName('- Announcements -', self)
settings.LabelDisplay().getFromName(
'Fabmetheus Blog, Skeinforge Announcements & Questions:', self)
settings.HelpPage().getFromNameAfterHTTP('fabmetheus.blogspot.com/',
'Fabmetheus Blog', self)
settings.LabelDisplay().getFromName('RepRap for Dummies website:',
self)
settings.HelpPage().getFromNameAfterHTTP('www.reprapfordummies.net/',
'reprapfordummies.net', self)
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Documentation -', self)
settings.LabelDisplay().getFromName(
'Local Documentation Table of Contents: ', self)
settings.HelpPage().getFromNameSubName('Contents', self,
'contents.html')
settings.LabelDisplay().getFromName(
'Wiki Manual with Pictures & Charts: ', self)
settings.HelpPage().getFromNameAfterHTTP(
'fabmetheus.crsndoo.com/wiki/index.php/Skeinforge', 'Wiki Manual',
self)
settings.LabelDisplay().getFromName('Skeinforge Overview: ', self)
settings.HelpPage().getFromNameSubName(
'Skeinforge Overview', self,
'skeinforge_application.skeinforge.html')
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Forums -', self)
settings.LabelDisplay().getFromName('Skeinforge/SFACT Forum:', self)
settings.HelpPage().getFromNameAfterWWW(
'forums.reprap.org/list.php?154', 'Skeinforge/SFACT', self)
settings.LabelDisplay().getFromName('Getting Started with the RepRap:',
self)
settings.HelpPage().getFromNameAfterHTTP(
'oreilly.com/catalog/0636920021537', 'RepRap Book', self)
settings.LabelDisplay().getFromName(
'moving to Skeinforge 40 and later:', self)
settings.HelpPage().getFromNameAfterHTTP(
'forums.reprap.org/read.php?154,75635,77156#msg-77156',
'Skeinforge 40 and over', self)
settings.LabelDisplay().getFromName('Extruder Calibration:', self)
settings.HelpPage().getFromNameAfterHTTP(
'www.reprapfordummies.net/index.php/anything-that-can-not-be-downloaded-or-sent-by-email/34-introduction/54-volumetriccalibration',
'Extruder Calibration', self)
settings.LabelDisplay().getFromName('Skeinforge Settings Thread:',
self)
settings.HelpPage().getFromNameAfterHTTP(
'dev.forums.reprap.org/read.php?12,27434',
'Skeinforge Settings Thread', self)
settings.LabelSeparator().getFromRepository(self)
self.wikiManualPrimary = settings.BooleanSetting().getFromValue(
'Wiki Manual Primary', self, True)
self.wikiManualPrimary.setUpdateFunction(self.save)
def __init__(self):
'Set the default settings, execute title & settings fileName.'
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.analyze_plugins.synopsis.html', self )
self.activateSynopsis = settings.BooleanSetting().getFromValue('Activate Synopsis', self, False )
self.fileNameInput = settings.FileNameInput().getFromFileName( [ ('Gcode text files', '*.gcode') ], 'Open File to Write Synopsis for', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute('http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Synopsis')
self.exportProfileAsCSVFile = settings.BooleanSetting().getFromValue('Export Profile As CSV File', self, True)
self.exportProfileAsZipFile = settings.BooleanSetting().getFromValue('Export Profile As Zip File', self, False)
self.executeTitle = 'Synopsis'
def __init__(self):
'Set the default settings, execute title & settings fileName.'
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.craft_plugins.smooth.html', self )
self.fileNameInput = settings.FileNameInput().getFromFileName( fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Smooth', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute('http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Smooth')
self.activateSmooth = settings.BooleanSetting().getFromValue('Activate Smooth', self, False)
self.layersFrom = settings.IntSpin().getSingleIncrementFromValue(0, 'Layers From (index):', self, 912345678, 1)
self.maximumShorteningOverWidth = settings.FloatSpin().getFromValue(0.2, 'Maximum Shortening over Width (float):', self, 2.0, 1.2)
self.executeTitle = 'Smooth'
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.analyze_plugins.interpret.html', self)
self.fileNameInput = settings.FileNameInput().getFromFileName( getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Interpret', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute('http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Interpret')
self.activateInterpret = settings.BooleanSetting().getFromValue('Activate Interpret', self, False )
self.printInterpretion = settings.BooleanSetting().getFromValue('Print Interpretion', self, False )
self.textProgram = settings.StringSetting().getFromValue('Text Program:', self, 'webbrowser')
self.executeTitle = 'Interpret'
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository(
'skeinforge_application.skeinforge_plugins.analyze_plugins.export_canvas_plugins.postscript.html',
self)
self.fileExtension = settings.StringSetting().getFromValue(
'File Extension:', self, '')
self.postscriptProgram = settings.StringSetting().getFromValue(
'Postscript Program:', self, 'gimp')
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.craft_plugins.feed.html', self)
self.fileNameInput = settings.FileNameInput().getFromFileName(fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Feed', self, '')
self.activateFeed = settings.BooleanSetting().getFromValue('Activate Feed', self, True)
self.feedRatePerSecond = settings.FloatSpin().getFromValue(2.0, 'Feed Rate (mm/s):', self, 50.0, 16.0)
self.maximumZDrillFeedRatePerSecond = settings.FloatSpin().getFromValue(0.02, 'Maximum Z Drill Feed Rate (mm/s):', self, 0.5, 0.1)
self.travelFeedRatePerSecond = settings.FloatSpin().getFromValue(2.0, 'Travel Feed Rate (mm/s):', self, 50.0, 16.0)
self.executeTitle = 'Feed'
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.craft_plugins.lash.html', self)
self.fileNameInput = settings.FileNameInput().getFromFileName( fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Lash', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute('http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Lash')
self.activateLash = settings.BooleanSetting().getFromValue('Activate Lash if you have backlash in your axes', self, False )
self.xBacklash = settings.FloatSpin().getFromValue( 0.1, 'X Backlash (mm):', self, 0.5, 0.2 )
self.yBacklash = settings.FloatSpin().getFromValue( 0.1, 'Y Backlash (mm):', self, 0.5, 0.3 )
self.executeTitle = 'Lash'
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository(
'skeinforge_application.skeinforge_utilities.skeinforge_help.html',
self)
announcementsText = '- Announcements - '
announcementsLabel = settings.LabelDisplay().getFromName(
announcementsText, self)
announcementsLabel.columnspan = 6
settings.LabelDisplay().getFromName(
'Fabmetheus Blog, Announcements & Questions:', self)
settings.HelpPage().getFromNameAfterHTTP('fabmetheus.blogspot.com/',
'Fabmetheus Blog', self)
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Documentation -', self)
settings.LabelDisplay().getFromName(
'Local Documentation Table of Contents: ', self)
settings.HelpPage().getFromNameSubName('Contents', self,
'contents.html')
settings.LabelDisplay().getFromName(
'Wiki Manual with Pictures & Charts: ', self)
settings.HelpPage().getFromNameAfterHTTP(
'fabmetheus.crsndoo.com/wiki/index.php/Skeinforge', 'Wiki Manual',
self)
settings.LabelDisplay().getFromName('Skeinforge Overview: ', self)
settings.HelpPage().getFromNameSubName(
'Skeinforge Overview', self,
'skeinforge_application.skeinforge.html')
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('SFACT FAQs:', self)
settings.HelpPage().getFromNameAfterHTTP(
'http://titanpad.com/XTUJXiNHmd', ' SFACT FAQs ', self)
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Search -', self)
settings.LabelDisplay().getFromName('Reprap Search:', self)
settings.HelpPage().getFromNameAfterHTTP(
'members.axion.net/~enrique/search_reprap.html', 'Reprap Search',
self)
settings.LabelDisplay().getFromName('Skeinforge Search:', self)
settings.HelpPage().getFromNameAfterHTTP(
'members.axion.net/~enrique/search_skeinforge.html',
'Skeinforge Search', self)
settings.LabelDisplay().getFromName('Web Search:', self)
settings.HelpPage().getFromNameAfterHTTP(
'members.axion.net/~enrique/search_web.html', 'Web Search', self)
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Troubleshooting -', self)
settings.LabelDisplay().getFromName('Skeinforge Forum:', self)
settings.HelpPage().getFromNameAfterHTTP(
'forums.reprap.org/list.php?154', ' Skeinforge Forum ', self)
settings.LabelSeparator().getFromRepository(self)
self.version = settings.LabelDisplay().getFromName(
'Version: ' + archive.getFileText(archive.getVersionFileName()),
self)
self.wikiManualPrimary = settings.BooleanSetting().getFromValue(
'Wiki Manual Primary', self, True)
self.wikiManualPrimary.setUpdateFunction(self.save)
def __init__(self):
'Set the default settings, execute title & settings fileName.'
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.analyze_plugins.clairvoyance.html', self)
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromDocumentationSubName('skeinforge_application.skeinforge_plugins.analyze_plugins.clairvoyance.html')
self.activateClairvoyance = settings.BooleanSetting().getFromValue('Activate Clairvoyance', self, False)
settings.LabelSeparator().getFromRepository(self)
self.fileNameInput = settings.FileNameInput().getFromFileName([('Gcode text files', '*.gcode')], 'Open File to Generate Clairvoyances for', self, '')
self.gcodeProgram = settings.StringSetting().getFromValue('Gcode Program:', self, 'webbrowser')
self.executeTitle = 'Clairvoyance'
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.craft_plugins.clip.html', self)
self.fileNameInput = settings.FileNameInput().getFromFileName(fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Clip', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute('http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Clip')
self.activateClip = settings.BooleanSetting().getFromValue('Activate Clip', self, False)
self.clipOverEdgeWidth = settings.FloatSpin().getFromValue(0.1, 'Clip Over Perimeter Width (ratio):', self, 0.8, 0.5)
self.maximumConnectionDistanceOverEdgeWidth = settings.FloatSpin().getFromValue( 1.0, 'Maximum Connection Distance Over Perimeter Width (ratio):', self, 20.0, 10.0)
self.executeTitle = 'Clip'
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.craft_plugins.unpause.html', self)
self.fileNameInput = settings.FileNameInput().getFromFileName( fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Unpause', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute('http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Unpause')
self.activateUnpause = settings.BooleanSetting().getFromValue('Activate Unpause', self, False )
self.delay = settings.FloatSpin().getFromValue( 2.0, 'Delay (milliseconds):', self, 42.0, 28.0 )
self.maximumSpeed = settings.FloatSpin().getFromValue( 1.1, 'Maximum Speed (ratio):', self, 1.9, 1.3 )
self.executeTitle = 'Unpause'
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.craft_plugins.hop.html', self )
self.fileNameInput = settings.FileNameInput().getFromFileName( fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Hop', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute('http://www.bitsfrombytes.com/wiki/index.php?title=Skeinforge_Hop')
self.activateHop = settings.BooleanSetting().getFromValue('Activate Hop', self, False )
self.hopOverLayerThickness = settings.FloatSpin().getFromValue( 0.5, 'Hop Over Layer Thickness (ratio):', self, 1.5, 1.0 )
self.minimumHopAngle = settings.FloatSpin().getFromValue( 20.0, 'Minimum Hop Angle (degrees):', self, 60.0, 30.0 )
self.executeTitle = 'Hop'
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository(
'skeinforge_application.skeinforge_utilities.skeinforge_meta.html',
self)
importantFileNames = ['polyfile']
settings.getRadioPluginsAddPluginFrame(getPluginsDirectoryPath(),
importantFileNames,
getPluginFileNames(), self)
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository(
'skeinforge_application.skeinforge_plugins.analyze_plugins.export_canvas_plugins.scalable_vector_graphics.html',
self)
self.fileExtension = settings.StringSetting().getFromValue(
'File Extension:', self, '')
self.svgViewer = settings.StringSetting().getFromValue(
'SVG Viewer:', self, 'webbrowser')
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_utilities.skeinforge_craft.html', self)
self.fileNameInput = settings.FileNameInput().getFromFileName( fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Craft', self, '')
self.importantFileNames = ['carve', 'chop', 'feed', 'flow', 'lift', 'raft', 'speed']
allCraftNames = archive.getPluginFileNamesFromDirectoryPath(getPluginsDirectoryPath())
self.radioPlugins = settings.getRadioPluginsAddPluginFrame(getPluginsDirectoryPath(), self.importantFileNames, allCraftNames, self)
CraftRadioButtonsSaveListener().getFromRadioPlugins(self.radioPlugins, self)
self.executeTitle = 'Craft'
def __init__(self):
'Set the default settings, execute title & settings fileName.'
skeinforge_profile.addListsToCraftTypeRepository(
'skeinforge_application.skeinforge_plugins.craft_plugins.cool.html',
self)
self.fileNameInput = settings.FileNameInput().getFromFileName(
fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(),
'Open File for Cool', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute(
'http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Cool')
self.activateCool = settings.BooleanSetting().getFromValue(
'Activate Cool', self, True)
settings.LabelDisplay().getFromName(
'- Fan settings (priority: top-down) -', self)
self.fanmaxPWM = settings.IntSpin().getFromValue(
0, 'Full Fan Speed (0 - 255):', self, 255, 200)
self.turnFanOnAtBeginning = settings.BooleanSetting().getFromValue(
'Turn Fan On at Beginning', self, True)
self.fanFirstLayer = settings.IntSpin().getFromValue(
0, 'Do Not Use Fan Before Layer (integer):', self, 100, 5)
self.bridgeFan = settings.BooleanSetting().getFromValue(
'Force Fan on Bridge Layers', self, False)
self.maximumFanLayerTime = settings.FloatSpin().getFromValue(
0.0, 'Maximum Layer Time for Fan use (seconds):', self, 240.0,
40.0)
self.fullFanLayerTime = settings.FloatSpin().getFromValue(
0.0, 'Full Fan Speed Bellow Layer Time (seconds):', self, 240.0,
20.0)
settings.LabelSeparator().getFromRepository(self)
self.coolType = settings.MenuButtonDisplay().getFromName(
'Cool Type:', self)
self.orbit = settings.MenuRadio().getFromMenuButtonDisplay(
self.coolType, 'Orbit', self, False)
self.slowDown = settings.MenuRadio().getFromMenuButtonDisplay(
self.coolType, 'Slow Down', self, True)
self.maximumCool = settings.FloatSpin().getFromValue(
0.0, 'Maximum Cool (Celcius):', self, 10.0, 2.0)
self.minimumLayerTime = settings.FloatSpin().getFromValue(
0.0, 'Minimum Layer Time (seconds):', self, 120.0, 60.0)
self.minimumOrbitalRadius = settings.FloatSpin().getFromValue(
0.0, 'Minimum Orbital Radius (millimeters):', self, 20.0, 10.0)
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Name of Alteration Files -',
self)
self.nameOfCoolEndFile = settings.StringSetting().getFromValue(
'Name of Cool End File:', self, 'cool_end.gcode')
self.nameOfCoolStartFile = settings.StringSetting().getFromValue(
'Name of Cool Start File:', self, 'cool_start.gcode')
settings.LabelSeparator().getFromRepository(self)
self.bridgeCool = settings.FloatSpin().getFromValue(
0.0, 'Bridge Cool (Celcius):', self, 10.0, 1.0)
self.orbitalOutset = settings.FloatSpin().getFromValue(
1.0, 'Orbital Outset (millimeters):', self, 5.0, 2.0)
self.turnFanOffAtEnding = settings.BooleanSetting().getFromValue(
'Turn Fan Off at Ending', self, True)
self.executeTitle = 'Cool'
def __init__(self):
'Set the default settings, execute title & settings fileName.'
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.craft_plugins.skirt.html', self)
self.fileNameInput = settings.FileNameInput().getFromFileName(
fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Skirt', self, '')
self.activateSkirt = settings.BooleanSetting().getFromValue('Activate Skirt:', self, False)
self.gapOverPerimeterWidth = settings.FloatSpin().getFromValue(
0.5, 'Gap over Perimeter Width (ratio):', self, 2.0, 1.0)
self.layersTo = settings.IntSpin().getSingleIncrementFromValue(0, 'Layers To (index):', self, 912345678, 1)
self.executeTitle = 'Skirt'
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.craft_plugins.scale.html', self )
self.fileNameInput = settings.FileNameInput().getFromFileName(fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Scale', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute('http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Scale')
self.activateScale = settings.BooleanSetting().getFromValue('Activate Scale', self, False)
self.xyPlaneScale = settings.FloatSpin().getFromValue(0.99, 'XY Plane Scale (ratio):', self, 1.03, 1.01)
self.zAxisScale = settings.FloatSpin().getFromValue(0.99, 'Z Axis Scale (ratio):', self, 1.02, 1.0)
self.svgViewer = settings.StringSetting().getFromValue('SVG Viewer:', self, 'webbrowser')
self.executeTitle = 'Scale'
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository(
'skeinforge_plugins.craft_plugins.outset.html', self)
self.fileNameInput = settings.FileNameInput().getFromFileName(
fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(),
'Open File for Outset', self, '')
self.activateOutset = settings.BooleanSetting().getFromValue(
'Activate Outset:', self, True)
self.executeTitle = 'Outset'
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.craft_plugins.clip.html', self)
self.fileNameInput = settings.FileNameInput().getFromFileName(fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Clip', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute('http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Clip')
self.activateClip = settings.BooleanSetting().getFromValue('Activate Clip..to clip the extrusion that overlaps when printing edges', self, True )
settings.LabelSeparator().getFromRepository(self)
self.clipOverEdgeWidth = settings.FloatSpin().getFromValue( 0.1, 'Clip Over Perimeter Width adjuster (increase for bigger gap):', self, 1.0, 0.33 )
self.maximumConnectionDistanceOverEdgeWidth = settings.FloatSpin().getFromValue( 1.0, 'Threshold for connecting inner loops (ratio):', self, 50.0, 25.0 )
self.executeTitle = 'Clip'
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.craft_plugins.chamber.html', self )
self.fileNameInput = settings.FileNameInput().getFromFileName( fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Chamber', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute('http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Chamber')
self.activateChamber = settings.BooleanSetting().getFromValue('Activate Chamber:', self, True )
self.bedTemperature = settings.FloatSpin().getFromValue( 20.0, 'Bed Temperature (Celcius):', self, 90.0, 60.0 )
self.chamberTemperature = settings.FloatSpin().getFromValue( 20.0, 'Chamber Temperature (Celcius):', self, 90.0, 30.0 )
self.holdingForce = settings.FloatSpin().getFromValue( 0.0, 'Holding Force (bar):', self, 100.0, 0.0 )
self.executeTitle = 'Chamber'
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.craft_plugins.tower.html', self )
self.fileNameInput = settings.FileNameInput().getFromFileName( fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Tower', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute('http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Tower')
self.activateTower = settings.BooleanSetting().getFromValue('Activate Tower', self, False )
self.extruderPossibleCollisionConeAngle = settings.FloatSpin().getFromValue( 40.0, 'Extruder Possible Collision Cone Angle (degrees):', self, 80.0, 60.0 )
self.maximumTowerHeight = settings.IntSpin().getFromValue( 2, 'Maximum Tower Height (layers):', self, 10, 5 )
self.towerStartLayer = settings.IntSpin().getFromValue( 1, 'Tower Start Layer (integer):', self, 5, 1 )
self.executeTitle = 'Tower'
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.analyze_plugins.skeiniso.html', self)
self.baseNameSynonym = 'behold.csv'
self.fileNameInput = settings.FileNameInput().getFromFileName( [ ('Gcode text files', '*.gcode') ], 'Open File for Skeiniso', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute('http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Skeiniso')
self.activateSkeiniso = settings.BooleanSetting().getFromValue('Activate Skeiniso', self, True )
self.addAnimation()
self.axisRulings = settings.BooleanSetting().getFromValue('Axis Rulings', self, True )
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Banding -', self )
self.bandHeight = settings.IntSpinUpdate().getFromValue( 0, 'Band Height (layers):', self, 10, 5 )
self.bottomBandBrightness = settings.FloatSpinUpdate().getFromValue( 0.0, 'Bottom Band Brightness (ratio):', self, 1.0, 0.7 )
self.bottomLayerBrightness = settings.FloatSpinUpdate().getFromValue( 0.0, 'Bottom Layer Brightness (ratio):', self, 1.0, 1.0 )
self.brightBandStart = settings.MenuButtonDisplay().getFromName('Bright Band Start:', self )
self.fromTheBottom = settings.MenuRadio().getFromMenuButtonDisplay( self.brightBandStart, 'From the Bottom', self, False )
self.fromTheTop = settings.MenuRadio().getFromMenuButtonDisplay( self.brightBandStart, 'From the Top', self, True )
settings.LabelSeparator().getFromRepository(self)
self.drawArrows = settings.BooleanSetting().getFromValue('Draw Arrows', self, False )
self.goAroundExtruderOffTravel = settings.BooleanSetting().getFromValue('Go Around Extruder Off Travel', self, False )
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Layers -', self )
self.layer = settings.IntSpinNotOnMenu().getSingleIncrementFromValue( 0, 'Layer (index):', self, 912345678, 0 )
self.layerExtraSpan = settings.IntSpinUpdate().getSingleIncrementFromValue( - 912345678, 'Layer Extra Span (integer):', self, 912345678, 912345678 )
settings.LabelSeparator().getFromRepository(self)
self.line = settings.IntSpinNotOnMenu().getSingleIncrementFromValue( 0, 'Line (index):', self, 912345678, 0 )
self.mouseMode = settings.MenuButtonDisplay().getFromName('Mouse Mode:', self )
self.displayLine = settings.MenuRadio().getFromMenuButtonDisplay( self.mouseMode, 'Display Line', self, True )
self.viewMove = settings.MenuRadio().getFromMenuButtonDisplay( self.mouseMode, 'View Move', self, False )
self.viewRotate = settings.MenuRadio().getFromMenuButtonDisplay( self.mouseMode, 'View Rotate', self, False )
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Number of Fill Layers -', self )
self.numberOfFillBottomLayers = settings.IntSpinUpdate().getFromValue( 0, 'Number of Fill Bottom Layers (integer):', self, 5, 1 )
self.numberOfFillTopLayers = settings.IntSpinUpdate().getFromValue( 0, 'Number of Fill Top Layers (integer):', self, 5, 1 )
settings.LabelSeparator().getFromRepository(self)
self.addScaleScreenSlide()
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Viewpoint -', self )
self.viewpointLatitude = settings.FloatSpin().getFromValue( 0.0, 'Viewpoint Latitude (degrees):', self, 180.0, 15.0 )
self.viewpointLongitude = settings.FloatSpin().getFromValue( 0.0, 'Viewpoint Longitude (degrees):', self, 360.0, 210.0 )
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Width -', self )
self.widthOfAxisNegativeSide = settings.IntSpinUpdate().getFromValue( 0, 'Width of Axis Negative Side (pixels):', self, 10, 2 )
self.widthOfAxisPositiveSide = settings.IntSpinUpdate().getFromValue( 0, 'Width of Axis Positive Side (pixels):', self, 10, 6 )
self.widthOfFillBottomThread = settings.IntSpinUpdate().getFromValue( 0, 'Width of Fill Bottom Thread (pixels):', self, 10, 2 )
self.widthOfFillTopThread = settings.IntSpinUpdate().getFromValue( 0, 'Width of Fill Top Thread (pixels):', self, 10, 2 )
self.widthOfInfillThread = settings.IntSpinUpdate().getFromValue( 0, 'Width of Infill Thread (pixels):', self, 10, 1 )
self.widthOfLoopThread = settings.IntSpinUpdate().getFromValue( 0, 'Width of Loop Thread (pixels):', self, 10, 2 )
self.widthOfPerimeterInsideThread = settings.IntSpinUpdate().getFromValue( 0, 'Width of Perimeter Inside Thread (pixels):', self, 10, 8 )
self.widthOfPerimeterOutsideThread = settings.IntSpinUpdate().getFromValue( 0, 'Width of Perimeter Outside Thread (pixels):', self, 10, 8 )
self.widthOfRaftThread = settings.IntSpinUpdate().getFromValue( 0, 'Width of Raft Thread (pixels):', self, 10, 1 )
self.widthOfSelectionThread = settings.IntSpinUpdate().getFromValue( 0, 'Width of Selection Thread (pixels):', self, 10, 6 )
self.widthOfTravelThread = settings.IntSpinUpdate().getFromValue( 0, 'Width of Travel Thread (pixels):', self, 10, 0 )
self.executeTitle = 'Skeiniso'
def __init__(self):
'Set the default settings, execute title & settings fileName.'
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.craft_plugins.skirt.html', self)
self.fileNameInput = settings.FileNameInput().getFromFileName(
fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Skirt', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute('http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Skirt')
self.activateSkirt = settings.BooleanSetting().getFromValue('Activate Skirt', self, False)
self.convex = settings.BooleanSetting().getFromValue('Convex:', self, True)
self.gapOverEdgeWidth = settings.FloatSpin().getFromValue(1.0, 'Gap over Perimeter Width (ratio):', self, 5.0, 3.0)
self.layersTo = settings.IntSpin().getSingleIncrementFromValue(0, 'Layers To (index):', self, 912345678, 1)
self.executeTitle = 'Skirt'
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository(
'skeinforge_tools.craft_plugins.altshell.html', self)
self.fileNameInput = settings.FileNameInput().getFromFileName(
fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(),
'Open File for Altshell', self, '')
self.activateAltshell = settings.BooleanSetting().getFromValue(
'Activate Altshell', self, False)
self.useM320M321 = settings.BooleanSetting().getFromValue(
'Use M320/M321', self, False)
self.executeTitle = 'Altshell'
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository(
'skeinforge_plugins.craft_plugins.coil.html', self)
self.fileNameInput = settings.FileNameInput().getFromFileName(
fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(),
'Open File for Coil', self, '')
self.activateCoil = settings.BooleanSetting().getFromValue(
'Activate Coil', self, True)
self.minimumToolDistance = settings.FloatSpin().getFromValue(
10.0, 'Minimum Tool Distance (millimeters):', self, 50.0, 20.0)
self.executeTitle = 'Coil'
def __init__(self):
'Set the default settings, execute title & settings fileName.'
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.craft_plugins.dwindle.html', self)
self.fileNameInput = settings.FileNameInput().getFromFileName(fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Dwindle', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromDocumentationSubName('skeinforge_application.skeinforge_plugins.craft_plugins.dwindle.html')
self.activateDwindle = settings.BooleanSetting().getFromValue('Activate Dwindle', self, False)
settings.LabelSeparator().getFromRepository(self)
self.endRateMultiplier = settings.FloatSpin().getFromValue(0.4, 'End Rate Multiplier (ratio):', self, 0.8, 0.5)
self.pentUpVolume = settings.FloatSpin().getFromValue(0.1, 'Pent Up Volume (cubic millimeters):', self, 1.0, 0.4)
self.slowdownSteps = settings.IntSpin().getFromValue(2, 'Slowdown Steps (positive integer):', self, 10, 3)
self.slowdownVolume = settings.FloatSpin().getFromValue(1.0, 'Slowdown Volume (cubic millimeters):', self, 10.0, 5.0)
self.executeTitle = 'Dwindle'
