def cb_enumerate(self, uid, connected_uid, position, hardware_version,
firmware_version, device_identifier, enumeration_type):
if enumeration_type == IPConnection.ENUMERATION_TYPE_CONNECTED or \
enumeration_type == IPConnection.ENUMERATION_TYPE_AVAILABLE:
if device_identifier == LCD20x4.DEVICE_IDENTIFIER:
try:
self.lcd = LCD20x4(uid, self.ipcon)
self.lcd.clear_display()
self.lcd.backlight_on()
self.lcd.register_callback(self.lcd.CALLBACK_BUTTON_PRESSED, self.cb_button_pressed)
self.configure_custom_chars()
except Error as e:
self.error_msg.showMessage('LCD 20x4 init failed: ' + str(e.description))
self.lcd = None
elif device_identifier == AmbientLight.DEVICE_IDENTIFIER:
try:
self.al = AmbientLight(uid, self.ipcon)
self.al.set_illuminance_callback_period(1000)
self.al.register_callback(self.al.CALLBACK_ILLUMINANCE,
self.cb_illuminance)
except Error as e:
self.error_msg.showMessage('Ambient Light init failed: ' + str(e.description))
self.al = None
elif device_identifier == AmbientLightV2.DEVICE_IDENTIFIER:
try:
self.al_v2 = AmbientLightV2(uid, self.ipcon)
self.al_v2.set_configuration(AmbientLightV2.ILLUMINANCE_RANGE_64000LUX,
AmbientLightV2.INTEGRATION_TIME_200MS)
self.al_v2.set_illuminance_callback_period(1000)
self.al_v2.register_callback(self.al_v2.CALLBACK_ILLUMINANCE,
self.cb_illuminance_v2)
except Error as e:
self.error_msg.showMessage('Ambient Light 2.0 init failed: ' + str(e.description))
self.al = None
elif device_identifier == Humidity.DEVICE_IDENTIFIER:
try:
self.hum = Humidity(uid, self.ipcon)
self.hum.set_humidity_callback_period(1000)
self.hum.register_callback(self.hum.CALLBACK_HUMIDITY,
self.cb_humidity)
except Error as e:
self.error_msg.showMessage('Humidity init failed: ' + str(e.description))
self.hum = None
elif device_identifier == Barometer.DEVICE_IDENTIFIER:
try:
self.baro = Barometer(uid, self.ipcon)
self.baro.set_air_pressure_callback_period(1000)
self.baro.register_callback(self.baro.CALLBACK_AIR_PRESSURE,
self.cb_air_pressure)
except Error as e:
self.error_msg.showMessage('Barometer init failed: ' + str(e.description))
self.baro = None
class WeatherStation(QApplication):
HOST = "localhost"
PORT = 4223
ipcon = None
lcd = None
al = None
al_v2 = None
hum = None
baro = None
projects = []
active_project = None
error_msg = None
def __init__(self, args):
super(QApplication, self).__init__(args)
self.error_msg = QErrorMessage()
self.ipcon = IPConnection()
signal.signal(signal.SIGINT, self.exit_demo)
signal.signal(signal.SIGTERM, self.exit_demo)
timer = QTimer(self)
timer.setSingleShot(True)
timer.timeout.connect(self.connect)
timer.start(1)
self.lcd_timer = QTimer(self)
self.lcd_timer.timeout.connect(self.mute_lcd)
self.lcd_timer.start(10000)
def exit_demo(self, signl=None, frme=None):
try:
self.ipcon.disconnect()
self.timer.stop()
self.tabs.destroy()
except:
pass
sys.exit()
def open_gui(self):
self.main = MainWindow(self)
self.main.setFixedSize(930, 530)
self.main.setWindowIcon(
QIcon(load_pixmap('starter_kit_weather_station_demo-icon.png')))
self.tabs = QTabWidget()
widget = QWidget()
layout = QVBoxLayout()
layout.addWidget(self.tabs)
widget.setLayout(layout)
self.main.setCentralWidget(widget)
self.projects.append(ProjectEnvDisplay(self.tabs, self))
self.projects.append(ProjectStatistics(self.tabs, self))
self.projects.append(ProjectXively(self.tabs, self))
self.tabs.addTab(self.projects[0], "Display Environment Measurements")
self.tabs.addTab(self.projects[1],
"Show Statistics with Button Control")
self.tabs.addTab(self.projects[2], "Connect to Xively")
self.active_project = self.projects[0]
self.tabs.currentChanged.connect(self.tabChangedSlot)
self.tabs.setCurrentIndex(1)
self.main.setWindowTitle("Starter Kit: Weather Station Demo " +
DEMO_VERSION)
self.main.show()
def connect(self):
try:
self.ipcon.connect(WeatherStation.HOST, WeatherStation.PORT)
except Error as e:
self.error_msg.showMessage('Connection Error: ' +
str(e.description) +
"\nBrickd installed and running?")
return
except socket.error as e:
self.error_msg.showMessage('Socket error: ' + str(e) +
"\nBrickd installed and running?")
return
self.ipcon.register_callback(IPConnection.CALLBACK_ENUMERATE,
self.cb_enumerate)
self.ipcon.register_callback(IPConnection.CALLBACK_CONNECTED,
self.cb_connected)
try:
self.ipcon.enumerate()
except Error as e:
self.error_msg.showMessage('Enumerate Error: ' +
str(e.description))
return
self.open_gui()
def tabChangedSlot(self, tabIndex):
if self.lcd is not None:
self.lcd.clear_display()
self.active_project = self.projects[tabIndex]
def cb_illuminance(self, illuminance):
for p in self.projects:
p.update_illuminance(illuminance / 10.0)
def cb_illuminance_v2(self, illuminance):
for p in self.projects:
p.update_illuminance(illuminance / 100.0)
def cb_humidity(self, humidity):
for p in self.projects:
p.update_humidity(humidity / 10.0)
def cb_air_pressure(self, air_pressure):
for p in self.projects:
p.update_air_pressure(air_pressure / 1000.0)
try:
temperature = self.baro.get_chip_temperature()
except Error as e:
print('Could not get temperature: ' + str(e.description))
return
for p in self.projects:
p.update_temperature(temperature / 100.0)
def configure_custom_chars(self):
c = [[0x00 for x in range(8)] for y in range(8)]
c[0] = [0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff]
c[1] = [0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff]
c[2] = [0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff]
c[3] = [0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff]
c[4] = [0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff]
c[5] = [0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff]
c[6] = [0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff]
c[7] = [0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff]
for i in range(len(c)):
self.lcd.set_custom_character(i, c[i])
def cb_button_pressed(self, button):
if self.lcd.is_backlight_on():
for p in self.projects:
p.button_pressed(button)
else:
self.lcd.backlight_on()
self.lcd_timer.start()
def mute_lcd(self):
self.lcd.backlight_off()
def cb_enumerate(self, uid, connected_uid, position, hardware_version,
firmware_version, device_identifier, enumeration_type):
if enumeration_type == IPConnection.ENUMERATION_TYPE_CONNECTED or \
enumeration_type == IPConnection.ENUMERATION_TYPE_AVAILABLE:
if device_identifier == LCD20x4.DEVICE_IDENTIFIER:
try:
self.lcd = LCD20x4(uid, self.ipcon)
self.lcd.clear_display()
self.lcd.backlight_on()
self.lcd.register_callback(
self.lcd.CALLBACK_BUTTON_PRESSED,
self.cb_button_pressed)
self.configure_custom_chars()
except Error as e:
self.error_msg.showMessage('LCD 20x4 init failed: ' +
str(e.description))
self.lcd = None
elif device_identifier == AmbientLight.DEVICE_IDENTIFIER:
try:
self.al = AmbientLight(uid, self.ipcon)
self.al.set_illuminance_callback_period(1000)
self.al.register_callback(self.al.CALLBACK_ILLUMINANCE,
self.cb_illuminance)
except Error as e:
self.error_msg.showMessage('Ambient Light init failed: ' +
str(e.description))
self.al = None
elif device_identifier == AmbientLightV2.DEVICE_IDENTIFIER:
try:
self.al_v2 = AmbientLightV2(uid, self.ipcon)
self.al_v2.set_configuration(
AmbientLightV2.ILLUMINANCE_RANGE_64000LUX,
AmbientLightV2.INTEGRATION_TIME_200MS)
self.al_v2.set_illuminance_callback_period(1000)
self.al_v2.register_callback(
self.al_v2.CALLBACK_ILLUMINANCE,
self.cb_illuminance_v2)
except Error as e:
self.error_msg.showMessage(
'Ambient Light 2.0 init failed: ' + str(e.description))
self.al = None
elif device_identifier == Humidity.DEVICE_IDENTIFIER:
try:
self.hum = Humidity(uid, self.ipcon)
self.hum.set_humidity_callback_period(1000)
self.hum.register_callback(self.hum.CALLBACK_HUMIDITY,
self.cb_humidity)
except Error as e:
self.error_msg.showMessage('Humidity init failed: ' +
str(e.description))
self.hum = None
elif device_identifier == Barometer.DEVICE_IDENTIFIER:
try:
self.baro = Barometer(uid, self.ipcon)
self.baro.set_air_pressure_callback_period(1000)
self.baro.register_callback(
self.baro.CALLBACK_AIR_PRESSURE, self.cb_air_pressure)
except Error as e:
self.error_msg.showMessage('Barometer init failed: ' +
str(e.description))
self.baro = None
def cb_connected(self, connected_reason):
if connected_reason == IPConnection.CONNECT_REASON_AUTO_RECONNECT:
while True:
try:
self.ipcon.enumerate()
break
except Error as e:
self.error_msg.showMessage('Enumerate Error: ' +
str(e.description))
time.sleep(1)
def cb_enumerate(self, uid, connected_uid, position, hardware_version,
firmware_version, device_identifier, enumeration_type):
if enumeration_type == IPConnection.ENUMERATION_TYPE_CONNECTED or \
enumeration_type == IPConnection.ENUMERATION_TYPE_AVAILABLE:
if device_identifier == LCD20x4.DEVICE_IDENTIFIER:
try:
self.lcd = LCD20x4(uid, self.ipcon)
self.lcd.clear_display()
self.lcd.backlight_on()
self.lcd.register_callback(
self.lcd.CALLBACK_BUTTON_PRESSED,
self.cb_button_pressed)
self.configure_custom_chars()
except Error as e:
self.error_msg.showMessage('LCD 20x4 init failed: ' +
str(e.description))
self.lcd = None
elif device_identifier == AmbientLight.DEVICE_IDENTIFIER:
try:
self.al = AmbientLight(uid, self.ipcon)
self.al.set_illuminance_callback_period(1000)
self.al.register_callback(self.al.CALLBACK_ILLUMINANCE,
self.cb_illuminance)
except Error as e:
self.error_msg.showMessage('Ambient Light init failed: ' +
str(e.description))
self.al = None
elif device_identifier == AmbientLightV2.DEVICE_IDENTIFIER:
try:
self.al_v2 = AmbientLightV2(uid, self.ipcon)
self.al_v2.set_configuration(
AmbientLightV2.ILLUMINANCE_RANGE_64000LUX,
AmbientLightV2.INTEGRATION_TIME_200MS)
self.al_v2.set_illuminance_callback_period(1000)
self.al_v2.register_callback(
self.al_v2.CALLBACK_ILLUMINANCE,
self.cb_illuminance_v2)
except Error as e:
self.error_msg.showMessage(
'Ambient Light 2.0 init failed: ' + str(e.description))
self.al = None
elif device_identifier == Humidity.DEVICE_IDENTIFIER:
try:
self.hum = Humidity(uid, self.ipcon)
self.hum.set_humidity_callback_period(1000)
self.hum.register_callback(self.hum.CALLBACK_HUMIDITY,
self.cb_humidity)
except Error as e:
self.error_msg.showMessage('Humidity init failed: ' +
str(e.description))
self.hum = None
elif device_identifier == Barometer.DEVICE_IDENTIFIER:
try:
self.baro = Barometer(uid, self.ipcon)
self.baro.set_air_pressure_callback_period(1000)
self.baro.register_callback(
self.baro.CALLBACK_AIR_PRESSURE, self.cb_air_pressure)
except Error as e:
self.error_msg.showMessage('Barometer init failed: ' +
str(e.description))
self.baro = None
class WeatherStation(QApplication):
HOST = "localhost"
PORT = 4223
ipcon = None
lcd = None
al = None
al_v2 = None
hum = None
baro = None
projects = []
active_project = None
error_msg = None
def __init__(self, args):
super(QApplication, self).__init__(args)
self.error_msg = QErrorMessage()
self.ipcon = IPConnection()
signal.signal(signal.SIGINT, self.exit_demo)
signal.signal(signal.SIGTERM, self.exit_demo)
timer = QTimer(self)
timer.setSingleShot(True)
timer.timeout.connect(self.connect)
timer.start(1)
self.lcd_timer = QTimer(self)
self.lcd_timer.timeout.connect(self.mute_lcd)
self.lcd_timer.start(10000)
def exit_demo(self, signl=None, frme=None):
try:
self.ipcon.disconnect()
self.timer.stop()
self.tabs.destroy()
except:
pass
sys.exit()
def open_gui(self):
self.main = MainWindow(self)
self.main.setFixedSize(930, 530)
self.main.setWindowIcon(QIcon(load_pixmap('starter_kit_weather_station_demo-icon.png')))
self.tabs = QTabWidget()
widget = QWidget()
layout = QVBoxLayout()
layout.addWidget(self.tabs)
widget.setLayout(layout)
self.main.setCentralWidget(widget)
self.projects.append(ProjectEnvDisplay(self.tabs, self))
self.projects.append(ProjectStatistics(self.tabs, self))
self.projects.append(ProjectXively(self.tabs, self))
self.tabs.addTab(self.projects[0], "Display Environment Measurements")
self.tabs.addTab(self.projects[1], "Show Statistics with Button Control")
self.tabs.addTab(self.projects[2], "Connect to Xively")
self.active_project = self.projects[0]
self.tabs.currentChanged.connect(self.tabChangedSlot)
self.tabs.setCurrentIndex(1)
self.main.setWindowTitle("Starter Kit: Weather Station Demo " + DEMO_VERSION)
self.main.show()
def connect(self):
try:
self.ipcon.connect(WeatherStation.HOST, WeatherStation.PORT)
except Error as e:
self.error_msg.showMessage('Connection Error: ' + str(e.description) + "\nBrickd installed and running?")
return
except socket.error as e:
self.error_msg.showMessage('Socket error: ' + str(e) + "\nBrickd installed and running?")
return
self.ipcon.register_callback(IPConnection.CALLBACK_ENUMERATE,
self.cb_enumerate)
self.ipcon.register_callback(IPConnection.CALLBACK_CONNECTED,
self.cb_connected)
try:
self.ipcon.enumerate()
except Error as e:
self.error_msg.showMessage('Enumerate Error: ' + str(e.description))
return
self.open_gui()
def tabChangedSlot(self, tabIndex):
if self.lcd is not None:
self.lcd.clear_display()
self.active_project = self.projects[tabIndex]
def cb_illuminance(self, illuminance):
for p in self.projects:
p.update_illuminance(illuminance/10.0)
def cb_illuminance_v2(self, illuminance):
for p in self.projects:
p.update_illuminance(illuminance/100.0)
def cb_humidity(self, humidity):
for p in self.projects:
p.update_humidity(humidity/10.0)
def cb_air_pressure(self, air_pressure):
for p in self.projects:
p.update_air_pressure(air_pressure/1000.0)
try:
temperature = self.baro.get_chip_temperature()
except Error as e:
print('Could not get temperature: ' + str(e.description))
return
for p in self.projects:
p.update_temperature(temperature/100.0)
def configure_custom_chars(self):
c = [[0x00 for x in range(8)] for y in range(8)]
c[0] = [0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff]
c[1] = [0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff]
c[2] = [0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff]
c[3] = [0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff]
c[4] = [0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff]
c[5] = [0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff]
c[6] = [0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff]
c[7] = [0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff]
for i in range(len(c)):
self.lcd.set_custom_character(i, c[i]);
def cb_button_pressed(self, button):
if self.lcd.is_backlight_on():
for p in self.projects:
p.button_pressed(button)
else:
self.lcd.backlight_on()
self.lcd_timer.start()
def mute_lcd(self):
self.lcd.backlight_off()
def cb_enumerate(self, uid, connected_uid, position, hardware_version,
firmware_version, device_identifier, enumeration_type):
if enumeration_type == IPConnection.ENUMERATION_TYPE_CONNECTED or \
enumeration_type == IPConnection.ENUMERATION_TYPE_AVAILABLE:
if device_identifier == LCD20x4.DEVICE_IDENTIFIER:
try:
self.lcd = LCD20x4(uid, self.ipcon)
self.lcd.clear_display()
self.lcd.backlight_on()
self.lcd.register_callback(self.lcd.CALLBACK_BUTTON_PRESSED, self.cb_button_pressed)
self.configure_custom_chars()
except Error as e:
self.error_msg.showMessage('LCD 20x4 init failed: ' + str(e.description))
self.lcd = None
elif device_identifier == AmbientLight.DEVICE_IDENTIFIER:
try:
self.al = AmbientLight(uid, self.ipcon)
self.al.set_illuminance_callback_period(1000)
self.al.register_callback(self.al.CALLBACK_ILLUMINANCE,
self.cb_illuminance)
except Error as e:
self.error_msg.showMessage('Ambient Light init failed: ' + str(e.description))
self.al = None
elif device_identifier == AmbientLightV2.DEVICE_IDENTIFIER:
try:
self.al_v2 = AmbientLightV2(uid, self.ipcon)
self.al_v2.set_configuration(AmbientLightV2.ILLUMINANCE_RANGE_64000LUX,
AmbientLightV2.INTEGRATION_TIME_200MS)
self.al_v2.set_illuminance_callback_period(1000)
self.al_v2.register_callback(self.al_v2.CALLBACK_ILLUMINANCE,
self.cb_illuminance_v2)
except Error as e:
self.error_msg.showMessage('Ambient Light 2.0 init failed: ' + str(e.description))
self.al = None
elif device_identifier == Humidity.DEVICE_IDENTIFIER:
try:
self.hum = Humidity(uid, self.ipcon)
self.hum.set_humidity_callback_period(1000)
self.hum.register_callback(self.hum.CALLBACK_HUMIDITY,
self.cb_humidity)
except Error as e:
self.error_msg.showMessage('Humidity init failed: ' + str(e.description))
self.hum = None
elif device_identifier == Barometer.DEVICE_IDENTIFIER:
try:
self.baro = Barometer(uid, self.ipcon)
self.baro.set_air_pressure_callback_period(1000)
self.baro.register_callback(self.baro.CALLBACK_AIR_PRESSURE,
self.cb_air_pressure)
except Error as e:
self.error_msg.showMessage('Barometer init failed: ' + str(e.description))
self.baro = None
def cb_connected(self, connected_reason):
if connected_reason == IPConnection.CONNECT_REASON_AUTO_RECONNECT:
while True:
try:
self.ipcon.enumerate()
break
except Error as e:
self.error_msg.showMessage('Enumerate Error: ' + str(e.description))
time.sleep(1)
