def brep_feat_local_revolution(event=None):
S = BRepPrimAPI_MakeBox(400., 250., 300.).Shape()
faces = list(TopologyExplorer(S).faces())
F1 = faces[2]
surf = BRep_Tool_Surface(F1)
D = gp_OX()
MW1 = BRepBuilderAPI_MakeWire()
p1 = gp_Pnt2d(100., 100.)
p2 = gp_Pnt2d(200., 100.)
aline = GCE2d_MakeLine(p1, p2).Value()
MW1.Add(BRepBuilderAPI_MakeEdge(aline, surf, 0., p1.Distance(p2)).Edge())
p1 = gp_Pnt2d(200., 100.)
p2 = gp_Pnt2d(150., 200.)
aline = GCE2d_MakeLine(p1, p2).Value()
MW1.Add(BRepBuilderAPI_MakeEdge(aline, surf, 0., p1.Distance(p2)).Edge())
p1 = gp_Pnt2d(150., 200.)
p2 = gp_Pnt2d(100., 100.)
aline = GCE2d_MakeLine(p1, p2).Value()
MW1.Add(BRepBuilderAPI_MakeEdge(aline, surf, 0., p1.Distance(p2)).Edge())
MKF1 = BRepBuilderAPI_MakeFace()
MKF1.Init(surf, False, 1e-6)
MKF1.Add(MW1.Wire())
FP = MKF1.Face()
breplib_BuildCurves3d(FP)
MKrev = BRepFeat_MakeRevol(S, FP, F1, D, 1, True)
F2 = faces[4]
MKrev.Perform(F2)
display.EraseAll()
display.DisplayShape(MKrev.Shape())
display.FitAll()
def extrusion(event=None):
# Make a box
Box = BRepPrimAPI_MakeBox(400., 250., 300.)
S = Box.Shape()
# Choose the first Face of the box
F = next(TopologyExplorer(S).faces())
surf = BRep_Tool_Surface(F)
# Make a plane from this face
Pln = Geom_Plane.DownCast(surf)
# Get the normal of this plane. This will be the direction of extrusion.
D = Pln.Axis().Direction()
# Inverse normal
D.Reverse()
# Create the 2D planar sketch
MW = BRepBuilderAPI_MakeWire()
p1 = gp_Pnt2d(200., -100.)
p2 = gp_Pnt2d(100., -100.)
aline = GCE2d_MakeLine(p1, p2).Value()
Edge1 = BRepBuilderAPI_MakeEdge(aline, surf, 0., p1.Distance(p2))
MW.Add(Edge1.Edge())
p1 = p2
p2 = gp_Pnt2d(100., -200.)
aline = GCE2d_MakeLine(p1, p2).Value()
Edge2 = BRepBuilderAPI_MakeEdge(aline, surf, 0., p1.Distance(p2))
MW.Add(Edge2.Edge())
p1 = p2
p2 = gp_Pnt2d(200., -200.)
aline = GCE2d_MakeLine(p1, p2).Value()
Edge3 = BRepBuilderAPI_MakeEdge(aline, surf, 0., p1.Distance(p2))
MW.Add(Edge3.Edge())
p1 = p2
p2 = gp_Pnt2d(200., -100.)
aline = GCE2d_MakeLine(p1, p2).Value()
Edge4 = BRepBuilderAPI_MakeEdge(aline, surf, 0., p1.Distance(p2))
MW.Add(Edge4.Edge())
# Build Face from Wire. NB: a face is required to generate a solid.
MKF = BRepBuilderAPI_MakeFace()
MKF.Init(surf, False, 1e-6)
MKF.Add(MW.Wire())
FP = MKF.Face()
breplib_BuildCurves3d(FP)
MKP = BRepFeat_MakePrism(S, FP, F, D, False, True)
MKP.Perform(200.)
# TODO MKP completes, seeing a split operation but no extrusion
assert MKP.IsDone()
res1 = MKP.Shape()
display.EraseAll()
display.DisplayColoredShape(res1, 'BLUE')
display.FitAll()
def create_shape(self):
d = self.declaration
pln = gp_Pln(d.position.proxy, d.direction.proxy)
curve = self.curve = Geom_Plane(pln)
if d.bounds:
u, v = d.bounds
face = BRepBuilderAPI_MakeFace(pln, u.x, v.x, u.y, v.y)
else:
face = BRepBuilderAPI_MakeFace(pln)
self.shape = face.Face()
def brepfeat_prism(event=None):
box = BRepPrimAPI_MakeBox(400, 250, 300).Shape()
faces = TopologyExplorer(box).faces()
for i in range(5):
face = next(faces)
srf = BRep_Tool_Surface(face)
c = gp_Circ2d(gp_Ax2d(gp_Pnt2d(200, 130), gp_Dir2d(1, 0)), 75)
circle = Geom2d_Circle(c)
wire = BRepBuilderAPI_MakeWire()
wire.Add(BRepBuilderAPI_MakeEdge(circle, srf, 0., pi).Edge())
wire.Add(BRepBuilderAPI_MakeEdge(circle, srf, pi, 2. * pi).Edge())
wire.Build()
display.DisplayShape(wire.Wire())
mkf = BRepBuilderAPI_MakeFace()
mkf.Init(srf, False, 1e-6)
mkf.Add(wire.Wire())
mkf.Build()
new_face = mkf.Face()
breplib_BuildCurves3d(new_face)
display.DisplayShape(new_face)
prism = BRepFeat_MakeDPrism(box, mkf.Face(), face, 100, True, True)
prism.Perform(400)
assert prism.IsDone()
display.EraseAll()
display.DisplayShape(prism.Shape())
display.DisplayColoredShape(wire.Wire(), 'RED')
display.FitAll()
def heightmap_from_image(event=None):
""" takes the heightmap from a jpeg file
and apply a texture
this example requires numpy/matplotlib
"""
print("opening image")
heightmap = Image.open('images/mountain_heightmap.jpg')
heightmap.show()
width = heightmap.size[0]
height = heightmap.size[1]
# create the gp_Pnt array
print("parse image and fill in point array")
for i in range(1, width):
for j in range(1, height):
# all 3 RGB values are equal, just take the first one
# vertex 1
height_value = heightmap.getpixel((i - 1, j - 1))[0]
v1 = gp_Pnt(i, j, float(height_value) / 10)
# vertex 2
height_value = heightmap.getpixel((i, j - 1))[0]
v2 = gp_Pnt(i + 1, j, float(height_value) / 10)
# vertex 3
height_value = heightmap.getpixel((i, j))[0]
v3 = gp_Pnt(i + 1, j + 1, float(height_value) / 10)
# vertex 4
height_value = heightmap.getpixel((i - 1, j))[0]
v4 = gp_Pnt(i, j + 1, float(height_value) / 10)
# boundaries
b1 = boundary_curve_from_2_points(v1, v2)
b2 = boundary_curve_from_2_points(v2, v3)
b3 = boundary_curve_from_2_points(v3, v4)
b4 = boundary_curve_from_2_points(v4, v1)
#
bConstrainedFilling = GeomFill_ConstrainedFilling(8, 2)
bConstrainedFilling.Init(b1, b2, b3, b4, False)
srf1 = bConstrainedFilling.Surface()
# make a face from this srf
patch = BRepBuilderAPI_MakeFace()
bounds = True
toldegen = 1e-6
patch.Init(srf1, bounds, toldegen)
patch.Build()
display.DisplayShape(patch.Face())
# then create faces
print("%s%%" % int(float(i) / width * 100))
#display.process_events()
display.FitAll()
# finally display image
heightmap.show()
def add_wire_to_face(face, wire, reverse=False):
'''
apply a wire to a face
use reverse to set the orientation of the wire to opposite
@param face:
@param wire:
@param reverse:
'''
face = BRepBuilderAPI_MakeFace(face)
if reverse:
wire.Reverse()
face.Add(wire)
result = face.Face()
face.Delete()
return result
def update_shape(self, change=None):
d = self.declaration
if d.wires:
shapes = d.wires
else:
shapes = [c for c in self.children() if isinstance(c, OccShape)]
if not shapes:
raise ValueError(
"No wires or children available to create a face!")
convert = self.shape_to_face
for i, s in enumerate(shapes):
if i == 0:
shape = BRepBuilderAPI_MakeFace(convert(s))
else:
shape.Add(convert(s))
self.shape = shape.Face()
def make_shape(self):
# 1 - retrieve the data from the UIUC airfoil data page
foil_dat_url = 'http://m-selig.ae.illinois.edu/ads/coord_seligFmt/%s.dat' % self.profile
print("Connecting to m-selig, retrieving foil data")
f = urllib2.urlopen(foil_dat_url)
print("Building foil geometry")
plan = gp_Pln(gp_Pnt(0., 0., 0.), gp_Dir(0., 0.,
1.)) # Z=0 plan / XY plan
section_pts_2d = []
for line in f.readlines()[1:]: # The first line contains info only
# 2 - do some cleanup on the data (mostly dealing with spaces)
data = line.split()
# 3 - create an array of points
if len(data) == 2: # two coordinates for each point
section_pts_2d.append(
gp_Pnt2d(
float(data[0]) * self.chord,
float(data[1]) * self.chord))
# 4 - use the array to create a spline describing the airfoil section
spline_2d = Geom2dAPI_PointsToBSpline(
point2d_list_to_TColgp_Array1OfPnt2d(section_pts_2d),
len(section_pts_2d) - 1, # order min
len(section_pts_2d)) # order max
spline = geomapi.To3d(spline_2d.Curve(), plan)
# 5 - figure out if the trailing edge has a thickness or not,
# and create a Face
try:
# first and last point of spline -> trailing edge
trailing_edge = make_edge(
gp_Pnt(section_pts_2d[0].X(), section_pts_2d[0].Y(), 0.0),
gp_Pnt(section_pts_2d[-1].X(), section_pts_2d[-1].Y(), 0.0))
face = BRepBuilderAPI_MakeFace(
make_wire([make_edge(spline), trailing_edge]))
except AssertionError:
# the trailing edge segment could not be created, probably because
# the points are too close
# No need to build a trailing edge
face = BRepBuilderAPI_MakeFace(make_wire(make_edge(spline)))
# 6 - extrude the Face to create a Solid
return BRepPrimAPI_MakePrism(
face.Face(), gp_Vec(gp_Pnt(0., 0., 0.),
gp_Pnt(0., 0., self.span))).Shape()
def brep_feat_extrusion_protrusion(event=None):
# Extrusion
S = BRepPrimAPI_MakeBox(400., 250., 300.).Shape()
faces = TopologyExplorer(S).faces()
F = next(faces)
surf1 = BRep_Tool_Surface(F)
Pl1 = Geom_Plane.DownCast(surf1)
D1 = Pl1.Pln().Axis().Direction().Reversed()
MW = BRepBuilderAPI_MakeWire()
p1, p2 = gp_Pnt2d(200., -100.), gp_Pnt2d(100., -100.)
aline = GCE2d_MakeLine(p1, p2).Value()
MW.Add(BRepBuilderAPI_MakeEdge(aline, surf1, 0., p1.Distance(p2)).Edge())
p1, p2 = gp_Pnt2d(100., -100.), gp_Pnt2d(100., -200.)
aline = GCE2d_MakeLine(p1, p2).Value()
MW.Add(BRepBuilderAPI_MakeEdge(aline, surf1, 0., p1.Distance(p2)).Edge())
p1, p2 = gp_Pnt2d(100., -200.), gp_Pnt2d(200., -200.)
aline = GCE2d_MakeLine(p1, p2).Value()
MW.Add(BRepBuilderAPI_MakeEdge(aline, surf1, 0., p1.Distance(p2)).Edge())
p1, p2 = gp_Pnt2d(200., -200.), gp_Pnt2d(200., -100.)
aline = GCE2d_MakeLine(p1, p2).Value()
MW.Add(BRepBuilderAPI_MakeEdge(aline, surf1, 0., p1.Distance(p2)).Edge())
MKF = BRepBuilderAPI_MakeFace()
MKF.Init(surf1, False, 1e-6)
MKF.Add(MW.Wire())
FP = MKF.Face()
breplib_BuildCurves3d(FP)
display.EraseAll()
MKP = BRepFeat_MakePrism(S, FP, F, D1, 0, True)
MKP.PerformThruAll()
res1 = MKP.Shape()
display.DisplayShape(res1)
# Protrusion
next(faces)
F2 = next(faces)
surf2 = BRep_Tool_Surface(F2)
Pl2 = Geom_Plane.DownCast(surf2)
D2 = Pl2.Pln().Axis().Direction().Reversed()
MW2 = BRepBuilderAPI_MakeWire()
p1, p2 = gp_Pnt2d(100., 100.), gp_Pnt2d(200., 100.)
aline = GCE2d_MakeLine(p1, p2).Value()
MW2.Add(BRepBuilderAPI_MakeEdge(aline, surf2, 0., p1.Distance(p2)).Edge())
p1, p2 = gp_Pnt2d(200., 100.), gp_Pnt2d(150., 200.)
aline = GCE2d_MakeLine(p1, p2).Value()
MW2.Add(BRepBuilderAPI_MakeEdge(aline, surf2, 0., p1.Distance(p2)).Edge())
p1, p2 = gp_Pnt2d(150., 200.), gp_Pnt2d(100., 100.)
aline = GCE2d_MakeLine(p1, p2).Value()
MW2.Add(BRepBuilderAPI_MakeEdge(aline, surf2, 0., p1.Distance(p2)).Edge())
MKF2 = BRepBuilderAPI_MakeFace()
MKF2.Init(surf2, False, 1e-6)
MKF2.Add(MW2.Wire())
MKF2.Build()
FP = MKF2.Face()
breplib_BuildCurves3d(FP)
MKP2 = BRepFeat_MakePrism(res1, FP, F2, D2, 0, True)
MKP2.PerformThruAll()
display.EraseAll()
trf = gp_Trsf()
trf.SetTranslation(gp_Vec(0, 0, 300))
gtrf = gp_GTrsf()
gtrf.SetTrsf(trf)
tr = BRepBuilderAPI_GTransform(MKP2.Shape(), gtrf, True)
fused = BRepAlgoAPI_Fuse(tr.Shape(), MKP2.Shape())
fused.Build()
display.DisplayShape(fused.Shape())
display.FitAll()
def cut_out(base):
outer = gp_Circ2d(gp_OX2d(), top_radius - 1.75 * roller_diameter)
inner = gp_Circ2d(gp_OX2d(), center_radius + 0.75 * roller_diameter)
geom_outer = GCE2d_MakeCircle(outer).Value()
geom_inner = GCE2d_MakeCircle(inner).Value()
geom_inner.Reverse()
base_angle = (2. * M_PI) / mounting_hole_count
hole_angle = atan(hole_radius / mounting_radius)
correction_angle = 3 * hole_angle
left = gp_Lin2d(gp_Origin2d(), gp_DX2d())
right = gp_Lin2d(gp_Origin2d(), gp_DX2d())
left.Rotate(gp_Origin2d(), correction_angle)
right.Rotate(gp_Origin2d(), base_angle - correction_angle)
geom_left = GCE2d_MakeLine(left).Value()
geom_right = GCE2d_MakeLine(right).Value()
inter_1 = Geom2dAPI_InterCurveCurve(geom_outer, geom_left)
inter_2 = Geom2dAPI_InterCurveCurve(geom_outer, geom_right)
inter_3 = Geom2dAPI_InterCurveCurve(geom_inner, geom_right)
inter_4 = Geom2dAPI_InterCurveCurve(geom_inner, geom_left)
if inter_1.Point(1).X() > 0:
p1 = inter_1.Point(1)
else:
p1 = inter_1.Point(2)
if inter_2.Point(1).X() > 0:
p2 = inter_2.Point(1)
else:
p2 = inter_2.Point(2)
if inter_3.Point(1).X() > 0:
p3 = inter_3.Point(1)
else:
p3 = inter_3.Point(2)
if inter_4.Point(1).X() > 0:
p4 = inter_4.Point(1)
else:
p4 = inter_4.Point(2)
trimmed_outer = GCE2d_MakeArcOfCircle(outer, p1, p2).Value()
trimmed_inner = GCE2d_MakeArcOfCircle(inner, p4, p3).Value()
plane = gp_Pln(gp_Origin(), gp_DZ())
arc1 = BRepBuilderAPI_MakeEdge(geomapi_To3d(trimmed_outer, plane)).Edge()
lin1 = BRepBuilderAPI_MakeEdge(gp_Pnt(p2.X(), p2.Y(), 0),
gp_Pnt(p3.X(), p3.Y(), 0)).Edge()
arc2 = BRepBuilderAPI_MakeEdge(geomapi_To3d(trimmed_inner, plane)).Edge()
lin2 = BRepBuilderAPI_MakeEdge(gp_Pnt(p4.X(), p4.Y(), 0),
gp_Pnt(p1.X(), p1.Y(), 0)).Edge()
cutout_wire = BRepBuilderAPI_MakeWire(arc1)
cutout_wire.Add(lin1)
cutout_wire.Add(arc2)
cutout_wire.Add(lin2)
# Turn the wire into a face
cutout_face = BRepBuilderAPI_MakeFace(cutout_wire.Wire())
filleted_face = BRepFilletAPI_MakeFillet2d(cutout_face.Face())
explorer = BRepTools_WireExplorer(cutout_wire.Wire())
while explorer.More():
vertex = explorer.CurrentVertex()
filleted_face.AddFillet(vertex, roller_radius)
explorer.Next()
cutout = BRepPrimAPI_MakePrism(filleted_face.Shape(),
gp_Vec(0.0, 0.0, thickness)).Shape()
result = base
rotate = gp_Trsf()
for i in range(0, mounting_hole_count):
rotate.SetRotation(gp_OZ(), i * 2. * M_PI / mounting_hole_count)
rotated_cutout = BRepBuilderAPI_Transform(cutout, rotate, True)
result = BRepAlgoAPI_Cut(result,
rotated_cutout.Shape()).Shape()
return result
# A wire instead of a generic shape now
aMirroredWire = topods.Wire(aMirroredShape)
# Combine the two constituent wires
mkWire = BRepBuilderAPI_MakeWire()
mkWire.Add(aWire.Wire())
mkWire.Add(aMirroredWire)
myWireProfile = mkWire.Wire()
# The face that we'll sweep to make the prism
myFaceProfile = BRepBuilderAPI_MakeFace(myWireProfile)
# We want to sweep the face along the Z axis to the height
aPrismVec = gp_Vec(0, 0, height)
myBody = BRepPrimAPI_MakePrism(myFaceProfile.Face(), aPrismVec)
# Add fillets to all edges through the explorer
mkFillet = BRepFilletAPI_MakeFillet(myBody.Shape())
anEdgeExplorer = TopExp_Explorer(myBody.Shape(), TopAbs_EDGE)
while anEdgeExplorer.More():
anEdge = topods.Edge(anEdgeExplorer.Current())
mkFillet.Add(thickness / 12.0, anEdge)
anEdgeExplorer.Next()
myBody = mkFillet
# Create the neck of the bottle
neckLocation = gp_Pnt(0, 0, height)
def __init__(self, pln, umin, umax, vmin, vmax):
builder = BRepBuilderAPI_MakeFace(pln.gp_pln, umin, umax, vmin, vmax)
self._f = Face(builder.Face())
def face():
p1 = gp_Pnt()
p2 = gp_Pnt()
p3 = gp_Pnt()
p4 = gp_Pnt()
p5 = gp_Pnt()
p6 = gp_Pnt()
# The white Face
sphere = gp_Sphere(gp_Ax3(gp_Pnt(0, 0, 0), gp_Dir(1, 0, 0)), 150)
green_face = BRepBuilderAPI_MakeFace(sphere, 0.1, 0.7, 0.2, 0.9)
# The red face
p1.SetCoord(-15, 200, 10)
p2.SetCoord(5, 204, 0)
p3.SetCoord(15, 200, 0)
p4.SetCoord(-15, 20, 15)
p5.SetCoord(-5, 20, 0)
p6.SetCoord(15, 20, 35)
array = TColgp_Array2OfPnt(1, 3, 1, 2)
array.SetValue(1, 1, p1)
array.SetValue(2, 1, p2)
array.SetValue(3, 1, p3)
array.SetValue(1, 2, p4)
array.SetValue(2, 2, p5)
array.SetValue(3, 2, p6)
curve = GeomAPI_PointsToBSplineSurface(array, 3, 8, GeomAbs_C2,
0.001).Surface()
red_face = BRepBuilderAPI_MakeFace(curve, 1e-6)
#The brown face
circle = gp_Circ(gp_Ax2(gp_Pnt(0, 0, 0), gp_Dir(1, 0, 0)), 80)
Edge1 = BRepBuilderAPI_MakeEdge(circle, 0, math.pi)
Edge2 = BRepBuilderAPI_MakeEdge(gp_Pnt(0, 0, -80), gp_Pnt(0, -10, 40))
Edge3 = BRepBuilderAPI_MakeEdge(gp_Pnt(0, -10, 40), gp_Pnt(0, 0, 80))
##TopoDS_Wire YellowWire
MW1 = BRepBuilderAPI_MakeWire(Edge1.Edge(), Edge2.Edge(), Edge3.Edge())
if not MW1.IsDone():
raise AssertionError("MW1 is not done.")
yellow_wire = MW1.Wire()
brown_face = BRepBuilderAPI_MakeFace(yellow_wire)
#The pink face
p1.SetCoord(35, -200, 40)
p2.SetCoord(50, -204, 30)
p3.SetCoord(65, -200, 30)
p4.SetCoord(35, -20, 45)
p5.SetCoord(45, -20, 30)
p6.SetCoord(65, -20, 65)
array2 = TColgp_Array2OfPnt(1, 3, 1, 2)
array2.SetValue(1, 1, p1)
array2.SetValue(2, 1, p2)
array2.SetValue(3, 1, p3)
array2.SetValue(1, 2, p4)
array2.SetValue(2, 2, p5)
array2.SetValue(3, 2, p6)
BSplineSurf = GeomAPI_PointsToBSplineSurface(array2, 3, 8, GeomAbs_C2,
0.001)
aFace = BRepBuilderAPI_MakeFace(BSplineSurf.Surface(), 1e-6).Face()
##
##//2d lines
P12d = gp_Pnt2d(0.9, 0.1)
P22d = gp_Pnt2d(0.2, 0.7)
P32d = gp_Pnt2d(0.02, 0.1)
##
line1 = Geom2d_Line(P12d, gp_Dir2d((0.2 - 0.9), (0.7 - 0.1)))
line2 = Geom2d_Line(P22d, gp_Dir2d((0.02 - 0.2), (0.1 - 0.7)))
line3 = Geom2d_Line(P32d, gp_Dir2d((0.9 - 0.02), (0.1 - 0.1)))
##
##//Edges are on the BSpline surface
Edge1 = BRepBuilderAPI_MakeEdge(line1, BSplineSurf.Surface(), 0,
P12d.Distance(P22d)).Edge()
Edge2 = BRepBuilderAPI_MakeEdge(line2, BSplineSurf.Surface(), 0,
P22d.Distance(P32d)).Edge()
Edge3 = BRepBuilderAPI_MakeEdge(line3, BSplineSurf.Surface(), 0,
P32d.Distance(P12d)).Edge()
##
Wire1 = BRepBuilderAPI_MakeWire(Edge1, Edge2, Edge3).Wire()
Wire1.Reverse()
pink_face = BRepBuilderAPI_MakeFace(aFace, Wire1).Face()
breplib_BuildCurves3d(pink_face)
display.DisplayColoredShape(green_face.Face(), 'GREEN')
display.DisplayColoredShape(red_face.Face(), 'RED')
display.DisplayColoredShape(pink_face, Quantity_Color(Quantity_NOC_PINK))
display.DisplayColoredShape(brown_face.Face(), 'BLUE')
display.DisplayColoredShape(yellow_wire, 'YELLOW', update=True)
def make_face(*args):
face = BRepBuilderAPI_MakeFace(*args)
with assert_isdone(face, 'failed to produce face'):
result = face.Face()
face.Delete()
return result