def updateModelTransform(self, f=0):
if self.triangleMesh == None:
return
for face in self.triangleMesh.faces:
face.normal = None
scale = 1.0
rotate = 0.0
try:
scale = float(settings.getProfileSetting("model_scale", "1.0"))
rotate = float(settings.getProfileSetting("model_rotate_base", "0.0")) / 180 * math.pi
except:
pass
scaleX = scale
scaleY = scale
scaleZ = scale
if settings.getProfileSetting("flip_x") == "True":
scaleX = -scaleX
if settings.getProfileSetting("flip_y") == "True":
scaleY = -scaleY
if settings.getProfileSetting("flip_z") == "True":
scaleZ = -scaleZ
mat00 = math.cos(rotate) * scaleX
mat01 = -math.sin(rotate) * scaleY
mat10 = math.sin(rotate) * scaleX
mat11 = math.cos(rotate) * scaleY
for i in xrange(0, len(self.triangleMesh.origonalVertexes)):
self.triangleMesh.vertexes[i].x = (
self.triangleMesh.origonalVertexes[i].x * mat00 + self.triangleMesh.origonalVertexes[i].y * mat01
)
self.triangleMesh.vertexes[i].y = (
self.triangleMesh.origonalVertexes[i].x * mat10 + self.triangleMesh.origonalVertexes[i].y * mat11
)
self.triangleMesh.vertexes[i].z = self.triangleMesh.origonalVertexes[i].z * scaleZ
self.moveModel()
def validate(self):
try:
wallThickness = float(self.setting.GetValue())
nozzleSize = float(settings.getProfileSetting("nozzle_size"))
if wallThickness <= nozzleSize * 0.5:
return (
ERROR,
"Trying to print walls thinner then the half of your nozzle size, this will not produce anything usable",
)
if wallThickness <= nozzleSize * 0.85:
return (
WARNING,
"Trying to print walls thinner then the 0.8 * nozzle size. Small chance that this will produce usable results",
)
if wallThickness < nozzleSize:
return SUCCESS, ""
lineCount = int(wallThickness / nozzleSize)
lineWidth = wallThickness / lineCount
lineWidthAlt = wallThickness / (lineCount + 1)
if lineWidth >= nozzleSize * 1.5 and lineWidthAlt <= nozzleSize * 0.85:
return (
WARNING,
"Current selected wall thickness results in a line thickness of "
+ str(lineWidthAlt)
+ "mm which is not recommended with your nozzle of "
+ str(nozzleSize)
+ "mm",
)
return SUCCESS, ""
except ValueError:
# We already have an error by the int/float validator in this case.
return SUCCESS, ""
def updateProfileToControls(self): "Update the configuration wx controls to show the new configuration settings" for setting in self.settingControlList: if setting.type == 'profile': setting.SetValue(settings.getProfileSetting(setting.configName)) else: setting.SetValue(settings.getPreference(setting.configName))
def updateModelTransform(self, f=0):
if self.triangleMesh == None:
return
scale = 1.0
rotate = 0.0
try:
scale = float(settings.getProfileSetting('model_scale', '1.0'))
rotate = float(settings.getProfileSetting('model_rotate_base', '0.0')) / 180 * math.pi
except:
pass
scaleX = scale
scaleY = scale
scaleZ = scale
if settings.getProfileSetting('flip_x') == 'True':
scaleX = -scaleX
if settings.getProfileSetting('flip_y') == 'True':
scaleY = -scaleY
if settings.getProfileSetting('flip_z') == 'True':
scaleZ = -scaleZ
mat00 = math.cos(rotate) * scaleX
mat01 =-math.sin(rotate) * scaleY
mat10 = math.sin(rotate) * scaleX
mat11 = math.cos(rotate) * scaleY
for i in xrange(0, len(self.triangleMesh.origonalVertexes)):
self.triangleMesh.vertexes[i].x = self.triangleMesh.origonalVertexes[i].x * mat00 + self.triangleMesh.origonalVertexes[i].y * mat01
self.triangleMesh.vertexes[i].y = self.triangleMesh.origonalVertexes[i].x * mat10 + self.triangleMesh.origonalVertexes[i].y * mat11
self.triangleMesh.vertexes[i].z = self.triangleMesh.origonalVertexes[i].z * scaleZ
for face in self.triangleMesh.faces:
v1 = self.triangleMesh.vertexes[face.vertexIndexes[0]]
v2 = self.triangleMesh.vertexes[face.vertexIndexes[1]]
v3 = self.triangleMesh.vertexes[face.vertexIndexes[2]]
face.normal = (v2 - v1).cross(v3 - v1)
face.normal.normalize()
self.moveModel()
def __init__(self, parent):
super(UltimakerCalibrationPage, self).__init__(parent, "Ultimaker Calibration")
self.AddText("Your Ultimaker requires some calibration.");
self.AddText("This calibration is needed for a proper extrusion amount.");
self.AddSeperator()
self.AddText("The following values are needed:");
self.AddText("* Diameter of filament");
self.AddText("* Number of steps per mm of filament extrusion");
self.AddSeperator()
self.AddText("The better you have calibrated these values, the better your prints\nwill become.");
self.AddSeperator()
self.AddText("First we need the diameter of your filament:");
self.filamentDiameter = wx.TextCtrl(self, -1, settings.getProfileSetting('filament_diameter', '2.89'))
self.GetSizer().Add(self.filamentDiameter, 0, wx.LEFT, 5)
self.AddText("If you do not own digital Calipers that can measure\nat least 2 digits then use 2.89mm.\nWhich is the average diameter of most filament.");
self.AddText("Note: This value can be changed later at any time.");
def updateInfillLineWidth(self, setting):
self.glCanvas.infillLineWidth = settings.getProfileSetting('nozzle_size')