def __init__(self, parent, new_size, old_size, text="", keep_original_size=False):
QDialog.__init__(self, parent)
intfunc = lambda tup: [int(val) for val in tup]
if intfunc(new_size) == intfunc(old_size):
self.keep_original_size = True
else:
self.keep_original_size = keep_original_size
self.width, self.height = new_size
self.old_width, self.old_height = old_size
self.ratio = self.width / self.height
layout = QVBoxLayout()
self.setLayout(layout)
formlayout = QFormLayout()
layout.addLayout(formlayout)
if text:
label = QLabel(text)
label.setAlignment(Qt.AlignHCenter)
formlayout.addRow(label)
self.w_edit = w_edit = QLineEdit(self)
w_valid = QIntValidator(w_edit)
w_valid.setBottom(1)
w_edit.setValidator(w_valid)
self.h_edit = h_edit = QLineEdit(self)
h_valid = QIntValidator(h_edit)
h_valid.setBottom(1)
h_edit.setValidator(h_valid)
zbox = QCheckBox(_("Original size"), self)
formlayout.addRow(_("Width (pixels)"), w_edit)
formlayout.addRow(_("Height (pixels)"), h_edit)
formlayout.addRow("", zbox)
formlayout.addRow(_("Original size:"), QLabel("%d x %d" % old_size))
self.z_label = QLabel()
formlayout.addRow(_("Zoom factor:"), self.z_label)
# Button box
self.bbox = bbox = QDialogButtonBox(QDialogButtonBox.Ok | QDialogButtonBox.Cancel)
bbox.accepted.connect(self.accept)
bbox.rejected.connect(self.reject)
layout.addWidget(bbox)
self.w_edit.setText(str(self.width))
self.h_edit.setText(str(self.height))
self.update_widgets()
self.setWindowTitle(_("Resize"))
w_edit.textChanged.connect(self.width_changed)
h_edit.textChanged.connect(self.height_changed)
zbox.toggled.connect(self.toggled_no_zoom)
zbox.setChecked(self.keep_original_size)
def __init__(self, parent, new_size, old_size, text=""):
QDialog.__init__(self, parent)
self.keep_original_size = False
self.width, self.height = new_size
self.old_width, self.old_height = old_size
self.ratio = self.width/self.height
layout = QVBoxLayout()
self.setLayout(layout)
formlayout = QFormLayout()
layout.addLayout(formlayout)
if text:
label = QLabel(text)
label.setAlignment(Qt.AlignHCenter)
formlayout.addRow(label)
self.w_edit = w_edit = QLineEdit(self)
w_valid = QIntValidator(w_edit)
w_valid.setBottom(1)
w_edit.setValidator(w_valid)
self.h_edit = h_edit = QLineEdit(self)
h_valid = QIntValidator(h_edit)
h_valid.setBottom(1)
h_edit.setValidator(h_valid)
zbox = QCheckBox(_("Original size"), self)
formlayout.addRow(_("Width (pixels)"), w_edit)
formlayout.addRow(_("Height (pixels)"), h_edit)
formlayout.addRow('', zbox)
formlayout.addRow(_("Original size:"), QLabel("%d x %d" % old_size))
self.z_label = QLabel()
formlayout.addRow(_("Zoom factor:"), self.z_label)
# Button box
self.bbox = bbox = QDialogButtonBox(QDialogButtonBox.Ok|
QDialogButtonBox.Cancel)
self.connect(bbox, SIGNAL("accepted()"), SLOT("accept()"))
self.connect(bbox, SIGNAL("rejected()"), SLOT("reject()"))
layout.addWidget(bbox)
self.w_edit.setText(str(self.width))
self.h_edit.setText(str(self.height))
self.update_widgets()
self.setWindowTitle(_("Resize"))
self.connect(w_edit, SIGNAL("textChanged(QString)"),
self.width_changed)
self.connect(h_edit, SIGNAL("textChanged(QString)"),
self.height_changed)
self.connect(zbox, SIGNAL("toggled(bool)"), self.toggled_no_zoom)
def __init__(self, parent):
#super(ObjectFT, self).__init__(Qt.Vertical, parent)
super().__init__(parent)
self.scp = None # variable to hold oscilloscope object
self.mutex = QMutex()
layoutWidget = QWidget()
layout = QGridLayout()
layoutWidget.setLayout(layout)
self.openDevBtn = QPushButton('Open Osci')
# channel stuff
self.measCh = QComboBox()
self.chSens = QComboBox()
self.triggCh = QComboBox()
self.frequency = QLineEdit()
self.frequency.setValidator(QIntValidator())
self.recordLen = QLineEdit()
self.recordLen.setValidator(QIntValidator())
self.delay = QLineEdit()
self.delay.setValidator(QDoubleValidator())
# trigger stuff
self.triggLevel = QLineEdit()
self.triggLevel.setToolTip(
'http://api.tiepie.com/libtiepie/0.5/triggering_scpch.html#triggering_scpch_level'
)
self.triggLevel.setText(
'0.5'
) # init value otherwise there's trouble with signal changing index of sensitivity
self.triggLevel.setValidator(QDoubleValidator(0., 1., 3))
self.hystereses = QLineEdit()
self.hystereses.setText('0.05')
self.hystereses.setToolTip(
'http://api.tiepie.com/libtiepie/0.5/triggering_scpch.html#triggering_scpch_hysteresis'
)
self.hystereses.setValidator(QDoubleValidator(0., 1., 3))
self.triggKind = QComboBox()
# do averages
self.averages = QSpinBox()
self.averages.setValue(1)
self.averages.setRange(1, 10000)
# put layout together
layout.addWidget(self.openDevBtn, 0, 0)
layout.addWidget(QLabel('Measuring Ch'), 1, 0)
layout.addWidget(self.measCh, 1, 1)
layout.addWidget(QLabel('Ch sensitivity'), 2, 0)
layout.addWidget(self.chSens, 2, 1)
layout.addWidget(QLabel('Sample freq. (kHz)'), 3, 0)
layout.addWidget(self.frequency, 3, 1)
layout.addWidget(QLabel('Record length'), 4, 0)
layout.addWidget(self.recordLen, 4, 1)
layout.addWidget(QLabel('Delay'), 5, 0)
layout.addWidget(self.delay, 5, 1)
layout.addWidget(QLabel('Trigger Ch'), 6, 0)
layout.addWidget(self.triggCh, 6, 1)
layout.addWidget(QLabel('Trigger Level (%)'), 7, 0)
layout.addWidget(self.triggLevel, 7, 1)
layout.addWidget(QLabel('Hystereses'), 8, 0)
layout.addWidget(self.hystereses, 8, 1)
layout.addWidget(QLabel('Trigger kind'), 9, 0)
layout.addWidget(self.triggKind, 9, 1)
layout.addWidget(QLabel('Averages'), 10, 0)
layout.addWidget(self.averages, 10, 1)
layout.setRowStretch(11, 10)
layout.setColumnStretch(2, 10)
self.addWidget(layoutWidget)
# connect UI to get things working
self.openDevBtn.released.connect(self.openDev)
self.chSens.currentIndexChanged.connect(self._changeSens)
self.frequency.returnPressed.connect(self._changeFreq)
self.recordLen.returnPressed.connect(self._changeRecordLength)
self.triggCh.currentIndexChanged.connect(self._changeTrigCh)
self.triggLevel.returnPressed.connect(self._triggLevelChanged)
self.triggLevel.textChanged.connect(self._check_state)
self.hystereses.returnPressed.connect(self._setHystereses)
self.hystereses.textChanged.connect(self._check_state)
def openDev(self):
# search for devices
libtiepie.device_list.update()
# try to open an oscilloscope with block measurement support
for item in libtiepie.device_list:
if item.can_open(libtiepie.DEVICETYPE_OSCILLOSCOPE):
self.scp = item.open_oscilloscope()
if self.scp.measure_modes & libtiepie.MM_BLOCK:
break
else:
self.scp = None
# init UI
#print(self.scp.name, 'found')
if self.scp is not None:
# Set measure mode:
self.scp.measure_mode = libtiepie.MM_BLOCK
# Set sample frequency:
self.scp.sample_frequency = 1e6 # 1 MHz
# Set record length:
self.scp.record_length = 10000 # 10000 samples
# Set pre sample ratio:
self.scp.pre_sample_ratio = 0 # 0 %
# Set trigger timeout:
self.scp.trigger_time_out = 100e-3 # 100 ms
# Enable channel 1 for measurement
# http://api.tiepie.com/libtiepie/0.5/group__scp__ch__enabled.html
self.scp.channels[
0].enabled = True # by default all channels are enabled
self.scp.range = 0.2
self.scp.coupling = libtiepie.CK_DCV # DC Volt
# Disable all channel trigger sources
for ch in self.scp.channels:
ch.trigger.enabled = False
# Setup channel trigger on 1
ch = self.scp.channels[0]
ch.trigger.enabled = True
ch.trigger.kind = libtiepie.TK_RISINGEDGE
ch.trigger.levels[0] = 0.5 # 50%
ch.trigger.hystereses[0] = 0.05 # 5%
# update UI
# channel
self.measCh.addItems(
['Ch{:d}'.format(i) for i in range(self.scp.channels.count)])
self.chSens.addItems(
['{:.1f} V'.format(i) for i in self.scp.channels[0].ranges])
self.frequency.setValidator(
QIntValidator(1, 1e-3 * self.scp.sample_frequency_max))
self.frequency.setText('{:d}'.format(
int(self.scp.sample_frequency * 1e-3)))
self.recordLen.setValidator(
QIntValidator(1, self.scp.record_length_max))
self.recordLen.setText('{:d}'.format(self.scp.record_length))
# trigger
self.triggCh.addItems(
['Ch{:d}'.format(i) for i in range(self.scp.channels.count)])
# TODO: doen't work in module anymore!!
#self.triggLevel.setText(str(ch.trigger.levels[0]))
#self.hystereses.setText(str(ch.trigger.hystereses[0]))
self.triggKind.addItems([
'{:s}'.format(i) for i in libtiepie.trigger_kind_str(
ch.trigger.kinds).split(', ')
])
self.openDevBtn.setEnabled(False)
# tell the world that the scope is connected
self.xAxeChanged.emit(
0, 1 / int(self.frequency.text()) * 1e-3 *
int(self.recordLen.text()))
self.yAxeChanged.emit(-1 * self.scp.range, self.scp.range)
self.triggLevelChanged.emit(ch.trigger.levels[0] * 2 *
self.scp.range - self.scp.range)
self.scpConnected.emit()
else:
msg = QMessageBox()
msg.setIcon(QMessageBox.Critical)
msg.setText('No supported device found')
msg.exec_()
def __init__(self, parent):
#super(ObjectFT, self).__init__(Qt.Vertical, parent)
super().__init__(parent)
self.stage = None
self.offset = 0. # offset from 0 where t0 is (mm)
self.newOff = 0.
self.stageRange = (0, 0)
layoutWidget = QWidget()
layout = QGridLayout()
layoutWidget.setLayout(layout)
# put layout together
self.openStageBtn = QPushButton("Open stage")
self.initStageBtn = QPushButton("Init stage")
#absolute move
#current position
self.currentPos = QLabel('')
#self.currentPos.setValidator(QDoubleValidator())
#relative move (mm)
self.deltaMove_mm = QLineEdit()
self.deltaMove_mm.setText('0')
self.deltaMove_mm.setValidator(QDoubleValidator())
self.deltaMovePlus_mm = QPushButton('+')
self.deltaMoveMinus_mm = QPushButton('-')
#relative move (fs)
self.deltaMove_fs = QLineEdit()
self.deltaMovePlus_fs = QPushButton('+')
self.deltaMoveMinus_fs = QPushButton('-')
#velocity
self.velocityLabel = QLabel('Velocity:')
self.velocity = QSlider(Qt.Horizontal)
self.velocity.setMinimum(0)
self.velocity.setMaximum(
2000) # unit in µm; TODO: try to get max vel. from controller
# scan from (fs)
self.scanFrom = QLineEdit()
self.scanFrom.setText('-100')
self.scanFrom.setValidator(QIntValidator())
# scan to (fs)
self.scanTo = QLineEdit()
self.scanTo.setText('100')
self.scanTo.setValidator(QIntValidator())
# scan stepsize (fs)
self.scanStep = QLineEdit()
self.scanStep.setText('10')
self.scanStep.setValidator(QDoubleValidator())
# center here button
self.centerBtn = QPushButton('Center here')
self.centerBtn.setToolTip('Center scan at current stage position')
self.startScanBtn = QPushButton("Start scan")
self.stopScanBtn = QPushButton("Stop scan")
self.niceBtn = QPushButton('Make it nice')
# spacer line
hLine = QFrame()
hLine.setFrameStyle(QFrame.HLine)
hLine.setSizePolicy(QSizePolicy.Minimum, QSizePolicy.Expanding)
# put layout together
layout.addWidget(self.openStageBtn, 0, 0)
layout.addWidget(self.initStageBtn, 0, 1)
layout.addWidget(QLabel("Current pos (mm):"), 1, 0)
layout.addWidget(self.currentPos, 1, 1)
layout.addWidget(self.velocityLabel, 2, 0)
layout.addWidget(self.velocity, 3, 0, 1, 2)
layout.addWidget(QLabel('Move relative (mm)'), 4, 0)
layout.addWidget(self.deltaMove_mm, 5, 0, 1, 2)
layout.addWidget(self.deltaMoveMinus_mm, 6, 0)
layout.addWidget(self.deltaMovePlus_mm, 6, 1)
layout.addWidget(QLabel('Move relative (fs)'), 7, 0)
layout.addWidget(self.deltaMove_fs, 8, 0, 1, 2)
layout.addWidget(self.deltaMoveMinus_fs, 9, 0)
layout.addWidget(self.deltaMovePlus_fs, 9, 1)
layout.addWidget(hLine, 10, 0, 1, 2)
layout.addWidget(QLabel('Scan from (fs)'), 11, 0)
layout.addWidget(self.scanFrom, 11, 1)
layout.addWidget(QLabel('Scan to (fs)'), 12, 0)
layout.addWidget(self.scanTo, 12, 1)
layout.addWidget(QLabel('Stepsize (fs)'), 13, 0)
layout.addWidget(self.scanStep, 13, 1)
layout.addWidget(self.startScanBtn, 14, 0)
layout.addWidget(self.stopScanBtn, 14, 1)
layout.addWidget(self.centerBtn, 15, 1)
layout.addWidget(self.niceBtn, 16, 1)
layout.setRowStretch(17, 10)
layout.setColumnStretch(2, 10)
self.addWidget(layoutWidget)
# make button and stuff functional
self.openStageBtn.released.connect(self.connectStage)
self.initStageBtn.released.connect(self.initStage)
self.scanFrom.returnPressed.connect(self._xAxeChanged)
self.scanTo.returnPressed.connect(self._xAxeChanged)
self.centerBtn.released.connect(self._centerHere)
self.deltaMovePlus_mm.released.connect(
lambda x=1: self.moveRel_mm(float(self.deltaMove_mm.text())))
self.deltaMoveMinus_mm.released.connect(
lambda x=-1: self.moveRel_mm(float(self.deltaMove_mm.text()), x))
################
# thread for updating position
#self.currPosThr = GenericThread(self.__getCurrPos)
self.updateCurrPos.connect(self.__updateCurrPos)
self.currPos_thread = QThread() # create the QThread
self.currPos_thread.start()
# This causes my_worker.run() to eventually execute in my_thread:
self.currPos_worker = GenericWorker(self.__getCurrPos)
self.currPos_worker.moveToThread(self.currPos_thread)
def __init__(self, parent):
#super(ObjectFT, self).__init__(Qt.Vertical, parent)
super().__init__(parent)
self.meter = None
self.collectData = True # bool for data collection thread
self.avgData = Queue() # need data for averaging and set for holding all
self.measure = False
self.runDataThr = True
self.measureData = []
self.startTime = None
layoutWidget = QWidget()
layout = QGridLayout()
layoutWidget.setLayout(layout)
##############
# gui elements
self.ipEdit = QLineEdit()
rx = QRegExp("^(([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5]).){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])$")
self.ipEdit.setValidator(QRegExpValidator(rx))
self.ipEdit.setText('127.0.0.1')
self.portEdit = QLineEdit()
self.portEdit.setValidator(QIntValidator(1, 65535, self))
self.portEdit.setText('5000')
self.connectBtn = QPushButton('Connect')
self.avgSpin = QSpinBox()
self.avgSpin.setValue(1)
self.avgSpin.setRange(1, 10000)
self.currValDisp = QLabel('0.0')
self.startMeasBtn = QPushButton('Start aq')
self.stopMeasBtn = QPushButton('Stop aq')
##############
# put layout together
layout.addWidget(QLabel('IP Address:'), 0, 0)
layout.addWidget(self.ipEdit, 1, 0)
layout.addWidget(QLabel('Port:'), 0, 1)
layout.addWidget(self.portEdit, 1, 1)
layout.addWidget(self.connectBtn, 2, 1)
layout.addWidget(QLabel('Averages'), 4, 0)
layout.addWidget(self.avgSpin, 5, 0)
layout.addWidget(self.currValDisp, 5, 1)
layout.addWidget(self.startMeasBtn, 6, 0)
layout.addWidget(self.stopMeasBtn, 6, 1)
layout.setRowStretch(7, 10)
self.addWidget(layoutWidget)
##############
# Network stuff
self.tcpClient = QtNetwork.QTcpSocket()
self.tcpClient.readyRead.connect(self.__getSocketData)
self.tcpClient.error.connect(lambda x: print(x))
##############
# make button and stuff functional
self.connectBtn.released.connect(self.connectMeter)
self.avgSpin.valueChanged.connect(self.changeAverage)
self.startMeasBtn.released.connect(self._startMeasure)
self.stopMeasBtn.released.connect(self._stopMeasure)
##############
# thread for getting data from socket
self.updateAvgTxt.connect(self.__updateAvgTxt)
self.dataAq_Thr = QThread()
self.dataAq_Thr.start()
self.dataAq_worker = GenericWorker(self.__getData)
self.dataAq_worker.moveToThread(self.dataAq_Thr)
def __init__(self, parent, new_size, old_size, text="",
keep_original_size=False):
QDialog.__init__(self, parent)
intfunc = lambda tup: [int(val) for val in tup]
if intfunc(new_size) == intfunc(old_size):
self.keep_original_size = True
else:
self.keep_original_size = keep_original_size
self.width, self.height = new_size
self.old_width, self.old_height = old_size
self.ratio = self.width/self.height
layout = QVBoxLayout()
self.setLayout(layout)
formlayout = QFormLayout()
layout.addLayout(formlayout)
if text:
label = QLabel(text)
label.setAlignment(Qt.AlignHCenter)
formlayout.addRow(label)
self.w_edit = w_edit = QLineEdit(self)
w_valid = QIntValidator(w_edit)
w_valid.setBottom(1)
w_edit.setValidator(w_valid)
self.h_edit = h_edit = QLineEdit(self)
h_valid = QIntValidator(h_edit)
h_valid.setBottom(1)
h_edit.setValidator(h_valid)
zbox = QCheckBox(_("Original size"), self)
formlayout.addRow(_("Width (pixels)"), w_edit)
formlayout.addRow(_("Height (pixels)"), h_edit)
formlayout.addRow('', zbox)
formlayout.addRow(_("Original size:"), QLabel("%d x %d" % old_size))
self.z_label = QLabel()
formlayout.addRow(_("Zoom factor:"), self.z_label)
# Button box
self.bbox = bbox = QDialogButtonBox(QDialogButtonBox.Ok|
QDialogButtonBox.Cancel)
bbox.accepted.connect(self.accept)
bbox.rejected.connect(self.reject)
layout.addWidget(bbox)
self.w_edit.setText(str(self.width))
self.h_edit.setText(str(self.height))
self.update_widgets()
self.setWindowTitle(_("Resize"))
w_edit.textChanged.connect(self.width_changed)
h_edit.textChanged.connect(self.height_changed)
zbox.toggled.connect(self.toggled_no_zoom)
zbox.setChecked(self.keep_original_size)
