####### ##### # # # # # # # ##### ###### ##### # # ## ##### ###### # # # # # ## # # # # # # # # # # # # ###### # # # # # # # ##### # # # #### # # # ##### # # # # # # # # # # # ##### # # ###### # # # # # # # # ## # # # # # # # # # # # # # # #### # # ##### ###### # # ##### # # # ###### Version 0.3.9 Copyright (c) 2015 Saul St John http://thundergate.io
ThunderGate is a collection of tools for the manipulation of Tigon3 Gigabit Ethernet controllers, with special emphasis on the Broadcom NetLink 57762, such as is found in Apple Thunderbolt Gigabit Ethernet adapters.
Tigon3 controllers contain a variety of architectural blocks, including a PCI endpoint, an 802.3 media access controller, on-chip ram, DMA read and write engines, nonvolatile storage, and one or more MIPS processors.
These features are exposed by ThunderGate through an easy-to-use Python interface, allowing for reverse engineering, development, and deployment of custom firmware and applications. Examples provided include a userspace VFIO tap driver, a firmware application capable of transparently monitoring network traffic and host memory, and a PCI option rom containing an EFI boot services driver which inhibits the employ of Intel I/O MMU address translation (VT-d).
This is experimental software made available to you under the terms of the GPLv3. You assume all risks in using it. Please refer to the COPYING file for details.
These instructions assume a Debian 8 host.
-
Install dependencies:
$ sudo apt-get install build-essential curl texinfo flex git ca-certificates
gnu-efi python python-ctypeslib libgmp-dev libmpfr-dev libmpc-dev
python-pip ipython
$ sudo pip install capstone
$ sudo easy_install git+http://github.com/nebula/python-eficompressor.git
~~~
-
Clone repository:
$ git clone http://github.com/sstjohn/thundergate.git ~~~
-
Retrieve, compile and install cross mips-elf binutils:
$ curl -O http://ftp.gnu.org/gnu/binutils/binutils-2.25.tar.bz2 $ tar xfi binutils-2.25.tar.bz2 $ mkdir binutils-build $ pushd binutils-build $ ../binutils-2.25/configure --target=mips-elf --with-sysroot --disable-nls $ make && sudo make install && popd ~~~
-
Retrieve, patch, compile and install cross mips-elf GCC 5.1:
$ curl -O http://ftp.gnu.org/gnu/gcc/gcc-5.1.0/gcc-5.1.0.tar.bz2
$ tar xfi gcc-5.1.0.tar.bz2
$ pushd gcc-5.1.0
$ patch -p1 < ../thundergate/misc/gcc-5.1.0-mtigon.patch
$ popd
$ mkdir gcc-build
$ pushd gcc-build
$ ../gcc-5.1.0/configure --target=mips-elf --program-prefix=mips-elf-
--disable-nls --enable-languages=c,c++ --without-headers
--without-llsc --with-tune=r6000 --with-arch=mips2 --disable-biarch
--disable-multilib --with-float=soft --without-hard-float
$ make all-gcc && make all-target-libgcc
$ sudo make install-gcc && sudo make install-target-libgcc && popd
~~~
-
Compile ThunderGate:
$ cd thundergate $ make ~~~
You should begin by taking a backup image of the factory-released firmware as
it was when you bought the device. This image can be used to restore the device
to a working state in the event that you should break it using ThunderGate.
See man ethtool
for details on conducting a device firmware dump.
In order to launch ThunderGate, you will need to know the BDF
(Bus-Device-Function) of your Tigon3 device. This information can be
obtained from, e.g., lspci
:
$ sudo lspci -d14e4: | grep Ethernet
0a:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM57762 Gigabit Ethernet PCIe
As is commonly the case on Apple hardware, the BDF for the Thunderbolt Gigabit in this example is '0a:00.0'.
In order to use the userspace tap driver, the network interface device
will need to be bound to the vfio-pci
kernel module:
$ sudo modprobe vfio-pci
$ echo $BDF | sudo tee /sys/bus/pci/devices/$BDF/driver/unbind
$ echo $BDF | sudo tee /sys/bus/pci/drivers/vfio-pci/bind
All other functionality is available regardless of the kernel driver in use.
$ py/main.py -h usage: main.py [-h] [-v] [-d] [-t] [-s] device positional arguments: device BDF of tg3 PCI device optional arguments: -h, --help show this help message and exit -i, --install install thundergate firmware -u, --uio use uio pci generic interface -v, --vfio use vfio interface -d, --driver load userspace tap driver -t, --tests run tests -s, --shell ipython cli
The -i
argument can be used to install all example firmware
to a Thunderbolt Gigabit Ethernet adapter device as follows:
$ sudo py/main.py -i 0a:00.0 ThunderGate Version 0.3.3 Copyright (c) 2015 Saul St John http://thundergate.io [+] tg3 inspector initializing [+] huge pages available [+] enumerating device capabilities [+] mapping device memory window [+] masking interrupts [+] requesting nvram lock... granted. [+] enabling nvram access [+] resetting nvram state machine [+] requesting nvram lock... granted. [+] enabling nvram access [+] enabling nvram write in grc block [+] enabling nvram write access [+] installing thundergate oprom [+] writing block length 4604 at offset 25fc..................... [+] installing thundergate rxcpu firmware [+] writing block length 1630 at offset 6c00......... [+] tg3 inspector terminated
A report describing an older version of this project can be found at http://pages.cs.wisc.edu/~sstjohn/tg_old.pdf.