On-demand switch configuration system.
License is GPLv3 if nothing else is stated.
sudo apt-get install redis-server python-redis libsnmp-python python-tempita python-ipcalc python-yaml isc-dhcp-server snmp
sudo /sbin/ifconfig eth1 inet 192.168.8.10 netmask 255.255.255.0
cp config-sample.py config.py
include "/scripts/swboot/dhcpd.conf";
sudo python swtftpd.py
python generate.py D20-A WS-C2950T-24
The Cisco switches will try to get DHCP and boot via TFTP if no config exists (wr erase). If you want to have a config stored on the switch it must include "boot host dhcp".
For event configs, see SVN allevents/access/default-paste/
In general, something like this will work:
en
conf t
boot host dhcp
interface vlan 1
no ip address
no shut
!
snmp-server community public RO
snmp-server community private RW
snmp-server system-shutdown
!
wr
!
en
conf t
ip routing
!
ip dhcp snooping vlan 1
! Perhaps needed:
! ip dhcp snooping information option allow-untrusted
ip dhcp snooping
!
!
interface GigabitEthernet1/0/5
description DHCP-server
switchport access vlan 123
switchport mode access
spanning-tree portfast
ip dhcp snooping trust
!
interface GigabitEthernet1/0/20
spanning-tree portfast
ip dhcp snooping vlan 1 information option format-type circuit-id string B01-B
!
interface Vlan1
ip address 10.80.10.1 255.255.255.0
ip helper-address 10.255.253.2
!
interface Vlan123
ip address 10.255.253.5 255.255.255.0
!