Skip to content
forked from ARMmbed/greentea

"Generic Regression Environment for test automation" for mbed

License

Notifications You must be signed in to change notification settings

panche85/greentea

 
 

Repository files navigation

Circle CI

Table of contents

Introduction

Hello and welcome to the mbed SDK test suite, codename Greentea. The test suite is a collection of tools that enable automated testing on mbed boards.

In its current configuration, the mbed test suite can automatically detect most of the popular mbed-enabled boards connected to the host over USB. The test suite uses the mbed-ls module to check for connected devices. A separate module called mbed-host-tests is used to flash and supervise each board's test. This decoupling allows us to make better software and maintain each of the functionalities as a separate domain.

Additional documentation:

Supported operating systems

  • Windows
  • Linux (experimental)
  • OS X 10.10 (experimental)

Virtual Environments (Python)

You may already recognize that out test tools are mainly written in Python (2.7). If your project / CI job etc. is using Python tools and Python packages extensively you may find that installing our test tools may cause Python dependencies collision. To avoid unnecessary hassle and separate packages used by tools and your system you can use virtual environment!

A Virtual Environment is a tool to keep Python package dependencies required by different projects in separate places, by creating virtual Python environments for them.

For more details check Virtual Environments.

How to get and install

The simplest way is to just install virtualenv via pip:

$ pip install virtualenv

Basic Usage

  • Create a virtual environment for your project:
$ cd my_project
$ virtualenv venv
  • To begin using the virtual environment (On Windows), it needs to be activated:
$ venv\Scripts\activate.bat
  • To begin using the virtual environment (On Linux), it needs to be activated:
$ source venv/bin/activate
  • Install packages as usual, for example:
$ pip install yotta
$ pip install greentea
  pip ...
  • If you are done working in the virtual environment (On Windows) for the moment, you can deactivate it:
$ venv/script/deactivate.bat
  • If you are done working in the virtual environment (On Windows) for the moment, you can deactivate it:
$ source venv/bin/deactivate

Basic usage - Windows example

Setup virtual environment and install all dependencies:

$ cd my_project
$ virtualenv venv
$ venv/script/activate.bat

$ pip install yotta
$ pip install greentea

Call your test procedures and tools using active environment, for example:

$ cd yotta_module/
$ mbedgt -V t frdom-k64f-gcc

Finally deactivate environment and go back to original Python module dependency settings:

$ venv/script/deactivate.bat

Getting started

To use the mbed test suite you must:

  • Install the dependencies.
  • Download and install the mbed test suite.
  • Build the mbed project sources.

End to end example

This end to end example shows how to install and use Greentea with an example mbed repository. Example will assume that you:

Install yotta:

$ pip install yotta --upgrade

Installing Greentea tools:

$ pip install mbed-greentea --upgrade

Create a local clone of the mbed-drivers repository.

$ cd some_dir
$ git clone https://github.com/ARMmbed/mbed-drivers.git
$ cd mbed-drivers

Make sure your board is compatible with K64F yotta targets:

$ yotta --plain search -k mbed-target:k64f target --short
frdm-k64f-gcc 0.2.0: Official mbed build target for the mbed frdm-k64f development board.
frdm-k64f-armcc 0.1.4: Official mbed build target for the mbed frdm-k64f development board, using the armcc toolchain.

additional results from https://yotta-private.herokuapp.com:

Set the yotta build target to frdm-k64f-gcc:

$ yotta target frdm-k64f-gcc

Build the mbed-drivers module with yotta (note that Greentea can do this for you also automatically):

$ yotta build

List the built test cases:

$ mbedgt --list
mbedgt: available tests for built targets, location '/home/some_dir/'
        target 'frdm-k64f-gcc':
        test 'mbed-drivers-test-serial_interrupt'
        test 'mbed-drivers-test-blinky'
        test 'mbed-drivers-test-div'
...
        test 'mbed-drivers-test-sleep_timeout'
        test 'mbed-drivers-test-ticker_3'
        test 'mbed-drivers-test-detect'

And finally - test (-V is used to activate test case verbose mode):

$ mbedgt -V

mbedgt: checking for yotta target in current directory
        reason: no --target switch set
mbedgt: checking yotta target in current directory
        calling yotta: yotta --plain target
mbedgt: assuming default target as 'frdm-k64f-gcc'
mbedgt: detecting connected mbed-enabled devices...
mbedgt: detected 3 devices
        detected 'K64F' -> 'K64F[0]', console at 'COM160', mounted at 'E:', target id '024002031E031E6AE3FFE3D2'
...
mbedgt: running 20 tests for target 'frdm-k64f-gcc' and platform 'K64F'
        running host test...
        test 'mbed-drivers-test-serial_interrupt' .............................................. OK in 6.16 sec
        running host test...
        test 'mbed-drivers-test-blinky' ........................................................ OK in 4.42 sec
        running host test...
        test 'mbed-drivers-test-div' ........................................................... OK in 1.41 sec
...
mbedgt: test report:
+---------------+---------------+------------------------------------+--------+--------------------+-------------+
| target        | platform_name | test                               | result | elapsed_time (sec) | copy_method |
+---------------+---------------+------------------------------------+--------+--------------------+-------------+
| frdm-k64f-gcc | K64F          | mbed-drivers-test-serial_interrupt | OK     | 6.16               | shell       |
| frdm-k64f-gcc | K64F          | mbed-drivers-test-blinky           | OK     | 4.42               | shell       |
| frdm-k64f-gcc | K64F          | mbed-drivers-test-div              | OK     | 1.41               | shell       |
| frdm-k64f-gcc | K64F          | mbed-drivers-test-dev_null         | OK     | 3.5                | shell       |
| frdm-k64f-gcc | K64F          | mbed-drivers-test-stdio            | OK     | 0.74               | shell       |
| frdm-k64f-gcc | K64F          | mbed-drivers-test-sleep_timeout    | OK     | 3.38               | shell       |
| frdm-k64f-gcc | K64F          | mbed-drivers-test-ticker           | OK     | 11.38              | shell       |
| frdm-k64f-gcc | K64F          | mbed-drivers-test-rtc              | OK     | 4.55               | shell       |
| frdm-k64f-gcc | K64F          | mbed-drivers-test-cstring          | FAIL   | 1.39               | shell       |
| frdm-k64f-gcc | K64F          | mbed-drivers-test-cpp              | OK     | 1.34               | shell       |
| frdm-k64f-gcc | K64F          | mbed-drivers-test-timeout          | OK     | 11.55              | shell       |
| frdm-k64f-gcc | K64F          | mbed-drivers-test-basic            | OK     | 1.37               | shell       |
| frdm-k64f-gcc | K64F          | mbed-drivers-test-ticker_3         | OK     | 11.38              | shell       |
| frdm-k64f-gcc | K64F          | mbed-drivers-test-ticker_2         | OK     | 11.38              | shell       |
| frdm-k64f-gcc | K64F          | mbed-drivers-test-heap_and_stack   | OK     | 1.39               | shell       |
| frdm-k64f-gcc | K64F          | mbed-drivers-test-hello            | OK     | 0.37               | shell       |
| frdm-k64f-gcc | K64F          | mbed-drivers-test-time_us          | OK     | 11.37              | shell       |
| frdm-k64f-gcc | K64F          | mbed-drivers-test-stl              | OK     | 1.36               | shell       |
| frdm-k64f-gcc | K64F          | mbed-drivers-test-echo             | OK     | 6.33               | shell       |
| frdm-k64f-gcc | K64F          | mbed-drivers-test-detect           | OK     | 0.47               | shell       |
+---------------+---------------+------------------------------------+--------+--------------------+-------------+

Result: 1 FAIL / 19 OK
Completed in 269.49 sec

Dependencies

Please install the following:

  • Python. If you do not have Python installed already, we recommend version 2.7.9. You'll need to add the following modules:

    • Pip. Pip comes bundled with some Python versions; run $ pip --version to see if you already have it.

    • setuptools to install dependencies.

    • cryptography (install using pip).

    • hgapi (install using pip).

    • colorama (install using pip).

    • PyGithub (install using pip).

    • semantic_version==2.4.1 (install using pip) - note that it requires Microsoft Visual C++ 9.0.

    • project-generator==0.5.7 (install using pip).

    • pyOCD (install using pip).

  • The cp shell command must be available to flash certain boards. It is sometimes available by default, for example on Linux, or you can install the Git command line tools.

  • Grep and cat.

  • yotta: used to build tests from the mbed SDK. Please note that yotta has its own set of dependencies, listed in the installation instructions.

  • If your OS is Windows, please follow the installation instructions for the serial port driver.

  • The mbed OS module mbed-drivers. It is available on GitHub but you can use yotta to grab it - we’ll see how later.

  • mbed-ls: installation instructions can be found in the repository.

  • mbed-host-tests: installation instructions can be found in the respository.

To check whether the mbed dependencies exist on your machine:

pip freeze | grep mbed
mbed-host-tests==0.1.4
mbed-ls==0.1.5

Installing Greentea

Installation from PyPI (Python Package Index)

The mbed-greentea module is redistributed via PyPI. We recommend you use install it with application pip.

$ pip install mbed-greentea

Note: Python 2.7.9 and later (on the Python 2 series), and Python 3.4 and later include pip by default, so you may have pip already.

Installation from Python sources

To install the mbed test suite, first clone the greentea repository:

$ git clone <link-to-greentea-repo>

Change the directory to the greentea directory:

$ cd greentea

Now you are ready to install greentea:

$ python setup.py install

On Linux, if you have a problem with permissions, use sudo:

$ sudo python setup.py install

To check whether the installation was successful try running the mbedgt --help command and check that it returns information (you may need to restart your terminal first):

$ mbedgt --help
Usage: mbedgt-script.py [options]

This automated test script is used to test mbed SDK 3.0 on mbed-enabled
deviecs with support from yotta build tool

Options:
  -h, --help            show this help message and exit
.
.

Environment check

At this point you should have all the dependencies and be ready to build the mbed-drivers and perform automated testing.

Make sure you have installed all of the tools. For example you can list all mbed devices connected to your host computer. Run command

$ mbedls

and you'll get:

+---------------------+-------------------+-------------------+--------------------------------+
|platform_name        |mount_point        |serial_port        |target_id                       |
+---------------------+-------------------+-------------------+--------------------------------+
|K64F                 |E:                 |COM61              |02400203D94B0E7724B7F3CF        |
+---------------------+-------------------+-------------------+--------------------------------+

Building the mbed-drivers for the target

You need to build the mbed-drivers for the target you're testing. We'll use the Freescale FRDM-K64F as an example.

Change directories to the mbed sources included in your release files:

$ cd mbed-drivers

Set your target, for example:

$ yotta target frdm-k64f-gcc

Then build the mbed-drivers (you don’t need to specify what you’re building; yotta builds the code in the current directory):

$ yotta build

Testing

Start by examining the current configuration using mbedgt (which itself uses mbed-ls). In this example, a K64F board is connected to the host system:

$ mbedgt --config

You'll see:

mbed-ls: detecting connected mbed-enabled devices...
mbed-ls: detected K64F, console at: COM61, mounted at: E:
        got yotta target 'frdm-k64f-gcc'
        got yotta target 'frdm-k64f-armcc'

mbedgt proposed a few supported yotta targets:

  • frdm-k64f-gcc - Freescale K64F platform compiled with the GCC cross-compiler.
  • frdm-k64f-armcc - Freescale K64F platform compiled with the Keil armcc cross-compiler.

For simplicity, only the GCC targets are described below.

You can invoke yotta from the test suite to build the targets. In this example:

  • --target is used to specify the targets that the test suite will interact with.
  • The option -O is used to tell the test suite to build sources and tests, but not to run the tests.
$ mbedgt --target=frdm-k64f-gcc -O

You'll get:

mbed-ls: detecting connected mbed-enabled devices...
mbed-ls: detected K64F, console at: COM61, mounted at: E:
        got yotta target 'frdm-k64f-gcc'
mbed-ls: calling yotta to build your sources and tests
warning: uvisor-lib has invalid module.json:
info: generate for target: frdm-k64f-gcc 0.0.10 at c:\temp\xxx\mbed-sdk-private\yotta_targets\frdm-k64f-gcc
mbedOS.cmake included
GCC-C.cmake included
mbedOS-GNU-C.cmake included
GCC-GXX.cmake included
mbedOS-GNU-CXX.cmake included
GCC version is: 4.8.4
GNU-ASM.cmake included
GNU-ASM.cmake included
-- Configuring done
-- Generating done
-- Build files have been written to: C:/temp/xxx/mbed-sdk-private/build/frdm-k64f-gcc
ninja: no work to do.

Now that the tests are built, the test suite can be called again to run the tests. From the same directory, invoke mbedgt again as shown below (this is the same command, but without the -O option):

$ mbedgt --target=frdm-k64f-gcc

or if you want to be more verbose:

$ mbedgt -V --target=frdm-k64f-gcc

You'll see:

mbed-ls: detecting connected mbed-enabled devices...
mbed-ls: detected K64F, console at: COM61, mounted at: E:
        got yotta target 'frdm-k64f-gcc'
mbed-ls: calling yotta to build your sources and tests
info: generate for target: frdm-k64f-gcc 0.0.10 at c:\temp\xxx\mbed-sdk-private\yotta_targets\frdm-k64f-gcc
mbedOS.cmake included
GCC-C.cmake included
mbedOS-GNU-C.cmake included
GCC-GXX.cmake included
mbedOS-GNU-CXX.cmake included
GCC version is: 4.8.4
GNU-ASM.cmake included
GNU-ASM.cmake included
-- Configuring done
-- Generating done
-- Build files have been written to: C:/temp/xxx/mbed-sdk-private/build/frdm-k64f-gcc
ninja: no work to do.
mbedgt: running tests...
        test 'mbed-test-dev_null' .................................................... OK
        test 'mbed-test-cpp' ......................................................... OK
        test 'mbed-test-time_us' ..................................................... OK
        test 'mbed-test-ticker' ...................................................... OK
        test 'mbed-test-div' ......................................................... OK
        test 'mbed-test-detect' ...................................................... SKIPPED
        test 'mbed-test-call_before_main' ............................................ OK
        test 'mbed-test-basic' ....................................................... OK
        test 'mbed-test-stdio' ....................................................... OK
        test 'mbed-test-ticker_3' .................................................... OK
        test 'mbed-test-ticker_2' .................................................... OK
        test 'mbed-test-timeout' ..................................................... OK
        test 'mbed-test-rtc' ......................................................... OK
        test 'mbed-test-echo' ........................................................ OK
        test 'mbed-test-hello' ....................................................... OK

Using Greentea with new targets

When prototyping or developing new port you will find yourself in a situation where your yotta modules are not published (especially targets) and you still want to use Greentea.

Greentea and yotta targets

Greentea uses the yotta search command to check that it has proper support for your board before calling tests. For example you can check compatible the yotta registry by calling:

$ yotta --plain search -k mbed-target:k64f target
frdm-k64f-gcc 0.2.0:
    Official mbed build target for the mbed frdm-k64f development board.
    mbed-target:k64f, mbed-official, k64f, frdm-k64f, gcc
frdm-k64f-armcc 0.1.4:
    Official mbed build target for the mbed frdm-k64f development board, using the armcc toolchain.
    mbed-target:k64f, mbed-official, k64f, frdm-k64f, armcc

additional results from https://yotta-private.herokuapp.com:

Here two targets are officially compatible with the K64F target: frdm-k64f-gcc ```` and frdm-k64f-armcc ```. They are both the same board, but each target uses a different toolchain: gcc and armcc.

If you’re working with a target that isn’t officially supported, you’ll have to follow the steps below.

Prototyping support

Greentea by default will only allow tests for boards officially supported by a yotta target. This contradicts prototyping and porting workflow. Your workflow may include use of yotta link and yotta link-target commands.

To support these workflows, we’ve created a command line switch --map-target was added. It adds an extra mapping between mbed board names and supported yotta targets.

For example we can add a local yotta target frdm-k64f-iar. This is a K64F using the compiler ``IAR```:

$ mbedgt --map-target K64F:frdm-k64f-iar

Note:

  • This command will only work locally. Use it while you are porting / protoyping.
  • When officially releasing your yotta targets please add correct yotta search bindings the keywords section of target.json'.

See example of official yotta target's target.json:

...
"keywords": [
    "mbed-target:k64f",
    "mbed-official",
    "k64f",
    "frdm-k64f",
    "gcc"
],
...

Note that the value "mbed-target:k64f" is added to mark that this yotta target supports the K64F board.

How to add board-target bindings for Greentea

In your yotta target target.json file, in the section keywords, add the value: mbed-target:<PLATFORM> where <PLATFORM> is the platform’s name in lowercase.

You can check the platform’s name using the mbedls command:

$ mbedls
+--------------+ ...
|platform_name | ...
+--------------+ ...
|K64F          | ...
|LPC1768       | ...
+--------------+ ...

Prototyping or porting sample workflow

Note: This is an example workflow; you may need to add or remove steps for your own workflow.

This example creates a new mbed yotta target, then runs mbed-drivers tests on it to check that it was ported correctly.

  • Clone the mbed-drivers repository
  • Create your new target locally (have a look at frdm-k64f-gcc as an example, or read the target docs here)
  • Use yotta link-target to link your target into mbed-drivers
  • Create your HAL and CMSIS port modules
  • Use yotta link to link these to mbed-drivers
  • Download the git version of mbed HAL, add your new hal and CMSIS modules as target-dependencies
  • Use yotta link to link mbed-hal to mbed-drivers
  • In mbed-drivers: set your target, compile and test!
  • Edit your HAL modules until things work, committing and pushing to your source control as you go
  • When your modules and targets are ready for public consumption, open a Pull request on mbed-hal with your dependency addition, and yotta publish your target and module(s)

Note that we're now using config.html for pin definitions. mbed-hal has a script that processes config definitions into pin definitions, see frdm-k64f targets for an example of how to define these: target.json)

Selecting boards for test running

You and tell Greentea which board it can use for test. To do so prepare list of allowed Target IDs and specify this list using --use-tids command line switch. The list should be comma separated.

$ mbedgt --use-tids 02400203C3423E603EBEC3D8,024002031E031E6AE3FFE3D2

Where 02400203C3423E603EBEC3D8 and 024002031E031E6AE3FFE3D2 might be target IDs of devices available in your system. Note: You can check target IDs of the connected devices using mbedls command:

$ mbedls
+--------------+---------------------+------------+------------+-------------------------+
|platform_name |platform_name_unique |mount_point |serial_port |target_id                |
+--------------+---------------------+------------+------------+-------------------------+
|K64F          |K64F[0]              |E:          |COM160      |024002031E031E6AE3FFE3D2 |
|K64F          |K64F[1]              |F:          |COM162      |02400203C3423E603EBEC3D8 |
|LPC1768       |LPC1768[0]           |G:          |COM5        |1010ac87cfc4f23c4c57438d |
+--------------+---------------------+------------+------------+-------------------------+

In this case, one target - the LPC1768 - won’t be tested.

Switch --use-tids example

We want to run two instances of Greentea and perform test sessions that won’t interfere with each other using two K64F boards: My resources (2 x K64F boards):

$ mbedls
+--------------+---------------------+------------+------------+-------------------------+
|platform_name |platform_name_unique |mount_point |serial_port |target_id                |
+--------------+---------------------+------------+------------+-------------------------+
|K64F          |K64F[0]              |E:          |COM160      |024002031E031E6AE3FFE3D2 |
|K64F          |K64F[1]              |F:          |COM162      |02400203C3423E603EBEC3D8 |
+--------------+---------------------+------------+------------+-------------------------+

We can use two consoles to call mbedgt. Each one will specify one target ID, and will therefore run tests only on that target:

Console 1:

$ cd <yotta module X>
$ mbedgt –use-tids 024002031E031E6AE3FFE3D2

Console 2:

$ cd <yotta module Y>
$ mbedgt –use-tids 02400203C3423E603EBEC3D8

The two instances of Greentea are called at the same time, but since we provide two mutually exclusive subsets of allowed target IDs with switch --use-tids the two instances will not collide and will not try to access the same K64F board when testing.

Digesting test output

We've added a feature for digesting input, which is activated with the --digest command line switch. Now you can pipe your proprietary test runner’s console output to the test suite or just cat a file with the test runner’s console output. You can also specify a file name that will be digested as the test runner's console input.

This option allows you to write your own automation where you execute the test runner or just feed the test suite with the test runner’s console output. The test suite parses the console output to determine whether it indicates success or failure, then returns that status to the test environment.

Note:

  • --digest=stdin will force stdin to be the default test suite input.

  • --digest=filename.txt will force filename.txt file content to be the default test suite input.

The examples below demonstrate the use of the --digest option. Assume that you have written a test runner in bash shell scripting, or just collected a bunch of test results in a database and the test console output is available.

To get the mbed test suite's predefined test results, you must scan the console output from the tests.

Note: test suite results and tags are encoded between double curly braces. For example, a typical success code looks like this: {{success}}{{end}}.

Example 1 - digest the default mbed host test runner

You can run mbed host tests with the mbed-host-tests module, using mbedhtrun to evaluate the existing test cases' test results (test results are returned to the environment as mbedgt return codes; the success code is 0).

Run:

Note: You may need to change "E" to the correct mount point and "COM61" to the correct serial port mapping for your system. Run the mbedls command to see the correct values.

$ mbedhtrun -d E: -f ".\build\frdm-k64f-gcc\test\mbed-drivers-test-hello.bin" -p COM61 -C 4 -c default -m K64F | mbedgt --digest=stdin -V

And you'll get:

MBED: Instrumentation: "COM61" and disk: "E:"
HOST: Copy image onto target...
HOST: Initialize serial port...
HOST: Reset target...
HOST: Property 'timeout' = '5'
HOST: Property 'host_test_name' = 'hello_auto'
HOST: Property 'description' = 'Hello World'
HOST: Property 'test_id' = 'MBED_10'
HOST: Start test...
Read 13 bytes:
Hello World

{{success}}
{{end}}
$ echo error level is %ERRORLEVEL%
error level is 0

Note: the test suite detected strings {{success}} and {{end}} and concluded that the test result was a success.

Example 2 - digest directly from file

Create file test.txt with the below contents. Make sure the file ends with a newline.

MBED: Instrumentation: "COM61" and disk: "E:"
HOST: Copy image onto target...
HOST: Initialize serial port...
HOST: Reset target...
HOST: Property 'timeout' = '5'
HOST: Property 'host_test_name' = 'hello_auto'
HOST: Property 'description' = 'Hello World'
HOST: Property 'test_id' = 'MBED_10'
HOST: Start test...
Read 13 bytes:
Hello World

{{ioerr_disk}}
{{end}}

Run the cat command and verify the contents contents above are printed:

$ cat test.txt

And scan for error codes inside the file:

$ mbedgt --digest=./test.txt
$ echo error level is %ERRORLEVEL%
error level is 5

Note: error level 5 stands for TEST_RESULT_IOERR_DISK.

Example 3 - pipe test.txt file content (as in example 2)

$ cat test.txt | mbedgt --digest=stdin
$ echo error level is %ERRORLEVEL%
error level is 5

Additional features

Dynamic host test loader

  • This feature allows users to point greentea and (indirectly mbedhtrun) to arbitrary directory (switch -e <dir> containing new/proprietary host test scripts. Host tests script files are enumerated in <dir> and registered so they can be used with local module test cases.
  • Not all host tests can be stored with mbedhtrun package. Some of them may and will be only used locally, for prototyping. Some host tests may just be very module dependent and should not be stored with ``mbedhtrun```.
  • In many cases users will add host tests to their yotta modules preferably under /test/host_tests/module directory.
  • Note: Directory ytmodule/test/host_tests will be default local host test location used by test tools such as greentea.
  • This feature allows mbedhtrun to load and register additional host test scripts from given directory.
  • Feature implementation is here

yotta config parse

  • Greentea reads yotta_config.json file to get information regarding current yotta module configuration.
  • Currently yotta_config::mbed-os::stdio::default-baud setting is read to determine default (interface chip) serial port baudrate. Note that this serial port is usually hooked to mbed's stdio.
  • This feature changes dafault yotta connfiguration baudrate (default-baud) to 115200. All test tool follow this change.
  • Feature implementation is here

Local yotta targets scan for mbed-target keywords

  • yotta search command was used to check for compatibility between connected mbed devices and specified (available) yotta targets.
  • New functionality uses locally stored yotta targets (mymodule/yotta_targets directory) to do so and allows user to add yotta registry results with new command line switch --yotta-registry.
  • This method is much faster than yotta registry queries and allows users to work and test off-line.
  • Feature implementation is here

Common Issues

  • Issue: In this release there are known issues related to Virtual Machine support.
    • Note: We are not planning to support VMs soon. If you are using our testing tools on VM and experiencing e.g. IOERR_SERIAL errors you should probably switch to native OS.
  • Issue: In this release there are known issues related to Linux and MacOS serial port handling during test.
    • Solution: Please use latest interface chip firmware for your mbed boards.
  • Issue: Some boards show up as 'unknown'.
    • Solution: We will add them in coming releases.
  • Issue: Not all mbed boards have targets mapped to them.
    • Solution: More mbed boards will be added in coming releases.

Uninstalling Greentea

You can uninstall the test suite package using pip. List installed packages and filter for the test suite's package name:

$ pip freeze | grep mbed-greentea
mbed-greentea==0.0.5

Uninstall the test suite package:

$ pip uninstall mbed-greentea
Uninstalling mbed-greentea:
  c:\python27\lib\site-packages\greentea-0.0.5-py2.7.egg
  c:\python27\scripts\mbedgt-script.py
  c:\python27\scripts\mbedgt.exe
  c:\python27\scripts\mbedgt.exe.manifest
Proceed (y/n)? Y
  Successfully uninstalled mbed-greentea

Commissioning mbed platforms (Linux)

On Ubuntu/Linux target serial device nodes are created with root permissions by default. Forcing user to run mbedgt as root. Create a udev rules file to change permission of the device nodes when they are created.

$ vi /etc/udev/rules.d/10-mbed-platforms.rules
SUBSYSTEMS=="usb", ATTRS{idVendor}=="<target Vendor Id>", ATTRS{idProduct}=="<target Product Id>", MODE:="0666"

Create a line for each type of platform based on their vendor and platform Ids. With this change mbed devices can be used with any user account.

About

"Generic Regression Environment for test automation" for mbed

Resources

License

Stars

Watchers

Forks

Packages

No packages published

Languages

  • Python 99.9%
  • Shell 0.1%