def __init__(self):
'''
initializes like an ISO7816-4 card with CLA=0x00
and checks available AID (Application ID) read from EF_DIR
initializes on the MF
'''
# initialize like a UICC
ISO7816.__init__(self, CLA=0x00)
self.AID = []
if self.dbg >= 2:
log(3, '(UICC.__init__) type definition: %s' % type(self))
log(3, '(UICC.__init__) CLA definition: %s' % hex(self.CLA))
# USIM selection from AID
if self.dbg:
log(3, '(USIM.__init__) UICC AID found:')
self.get_AID()
for aid in self.AID:
if tuple(aid[0:5]) == (0xA0, 0x00, 0x00, 0x00, 0x87) \
and tuple(aid[5:7]) == (0x10, 0x02) :
usim = self.select(addr=aid, type='aid')
if usim is None and self.dbg:
log(2, '(USIM.__init__) USIM AID selection failed')
if usim is not None:
self.USIM_AID = aid
if self.dbg:
log(3, '(USIM.__init__) USIM AID selection succeeded\n')
def __init__(self):
'''
initialize like an ISO7816-4 card with CLA=0xA0
can also be used for USIM working in SIM mode,
'''
ISO7816.__init__(self, CLA=0xA0)
if self.dbg:
print '[DBG] type definition: %s' % type(self)
print '[DBG] CLA definition: %s' % hex(self.CLA)
self.caller = {
'Kc': self.get_Kc,
'IMSI': self.get_imsi,
'LOCI': self.get_loci,
'HPLMN': self.get_subscr_sim_hplmn,
'PLMN_SEL': self.get_subscr_sim_plmnsel,
'ICCID': self.get_subscr_iccid,
'SPN': self.get_subscr_sim_spn,
'ACC': self.get_subscr_sim_acc,
'FPLMN': self.get_subscr_sim_fplmn,
'MSISDN': self.get_subscr_sim_msisdn,
'PRINT_ALL': self.print_sim_card_info,
'Kc-W': self.write_subscr_Kc,
'LOCI-W': self.write_subscr_loci,
'SMSP': self.get_subscr_smsp,
'GSM_ALGO': self.run_gsm_algorithm
}
def __init__(self):
'''
initializes like an ISO7816-4 card with CLA=0x00
and checks available AID (Application ID) read from EF_DIR
initializes on the MF
'''
# initialize like a UICC
ISO7816.__init__(self, CLA=0x00)
self.AID = []
self.dbg = 0
if self.dbg >= 2:
log(3, '(UICC.__init__) type definition: %s' % type(self))
log(3, '(UICC.__init__) CLA definition: %s' % hex(self.CLA))
# USIM selection from AID
if self.dbg:
log(3, '(USIM.__init__) UICC AID found:')
self.get_AID()
for aid in self.AID:
if tuple(aid[0:5]) == (0xA0, 0x00, 0x00, 0x00, 0x87) \
and tuple(aid[5:7]) == (0x10, 0x02) :
usim = self.select(addr=aid, type='aid')
if usim is None and self.dbg:
log(2, '(USIM.__init__) USIM AID selection failed')
if usim is not None:
self.USIM_AID = aid
if self.dbg:
log(3,
'(USIM.__init__) USIM AID selection succeeded\n')
def __init__(self):
'''
initializes like an ISO7816-4 card with CLA=0x00
and checks available AID (Application ID) read from EF_DIR
initializes on the MF
'''
# initialize like a UICC
ISO7816.__init__(self, CLA=0x00)
self.AID = []
if self.dbg:
print '[DBG] type definition: %s' % type(self)
print '[DBG] CLA definition: %s' % hex(self.CLA)
# USIM selection from AID
print '[+] UICC AID found:'
self.get_AID()
for aid in self.AID:
if tuple(aid[0:5]) == (0xA0, 0x00, 0x00, 0x00, 0x87) \
and tuple(aid[5:7]) == (0x10, 0x04) :
isim = self.select(Data=aid, typ='aid')
if isim is None:
print '[+] ISIM AID selection failed'
else:
print '[+] ISIM AID selection succeeded\n'
def __init__(self):
'''
initialize like an ISO7816-4 card with CLA=0xA0
can also be used for USIM working in SIM mode,
'''
ISO7816.__init__(self, CLA=0xA0)
if self.dbg >= 2:
log(3, '(SIM.__init__) type definition: %s' % type(self))
log(3, '(SIM.__init__) CLA definition: %s' % hex(self.CLA))
def __init__(self):
"""
initialize like an ISO7816-4 card with CLA=0xA0
can also be used for USIM working in SIM mode,
"""
ISO7816.__init__(self, CLA=0xA0)
if self.dbg >= 2:
log(3, '(SIM.__init__) type definition: %s' % type(self))
log(3, '(SIM.__init__) CLA definition: %s' % hex(self.CLA))
def __init__(self):
'''
initializes like an ISO7816-4 card with CLA=0x00
and check available AID (Application ID) read straight after card init
'''
ISO7816.__init__(self, CLA=0x00)
self.AID = []
if self.dbg >= 2:
log(3, '(UICC.__init__) type definition: %s' % type(self))
log(3, '(UICC.__init__) CLA definition: %s' % hex(self.CLA))
def __init__(self):
'''
initializes like an ISO7816-4 card with CLA=0x00
and check available AID (Application ID) read straight after card init
'''
ISO7816.__init__(self, CLA=0x00)
self.AID = []
if self.dbg >= 2:
log(3, '(UICC.__init__) type definition: %s' % type(self))
log(3, '(UICC.__init__) CLA definition: %s' % hex(self.CLA))
def __init__(self):
'''
initializes like an ISO7816-4 card with CLA=0x00
and checks available AID (Application ID) read from EF_DIR
initializes on the MF
'''
# initialize like a UICC
ISO7816.__init__(self, CLA=0x00)
self.AID = []
if self.dbg >= 2:
log(3, '(UICC.__init__) type definition: %s' % type(self))
log(3, '(UICC.__init__) CLA definition: %s' % hex(self.CLA))
self.SELECT_ADF_USIM()
def __init__(self):
'''
initializes like an ISO7816-4 card with CLA=0x00
and checks available AID (Application ID) read from EF_DIR
initializes on the MF
'''
# initialize like a UICC
ISO7816.__init__(self, CLA=0x00)
self.AID = []
if self.dbg >= 2:
log(3, '(UICC.__init__) type definition: %s' % type(self))
log(3, '(UICC.__init__) CLA definition: %s' % hex(self.CLA))
self.SELECT_ADF_USIM()
def __init__(self, reader=''):
"""
initializes like an ISO7816-4 card with CLA=0x00
and checks available AID (Application ID) read from EF_DIR
initializes on the MF
"""
# initialize like a UICC
ISO7816.__init__(self, CLA=0x00, reader=reader)
self.AID = []
self.AID_GP = {}
self.AID_USIM = None
self.AID_ISIM = None
#
if self.dbg >= 2:
log(3, '(UICC.__init__) type definition: %s' % type(self))
log(3, '(UICC.__init__) CLA definition: %s' % hex(self.CLA))
#
self.SELECT_ADF_USIM()
def __init__(self):
'''
initialize like an ISO7816-4 card with CLA=0xA0
can also be used for USIM working in SIM mode,
'''
ISO7816.__init__(self, CLA=0xA0)
if self.dbg:
print '[DBG] type definition: %s' % type(self)
print '[DBG] CLA definition: %s' % hex(self.CLA)
self.caller = {
'KC' : self.get_Kc,
'IMSI' : self.get_imsi,
'LOCI' : self.get_loci,
'HPPLMN' : self.get_hpplmn,
'PLMN_SEL' : self.get_plmnsel,
'ACC' : self.get_acc,
'ICCID' : self.get_iccid,
'FPLMN' : self.get_fplmn,
'MSISDN' : self.get_msisdn,
'SMSP' : self.get_smsp,
}
def sw_status(self, sw1, sw2):
'''
sw_status(sw1=int, sw2=int) -> string
extends SW status bytes interpretation from ISO7816
with ETSI / 3GPP SW codes
helps to speak with the smartcard!
'''
status = ISO7816.sw_status(self, sw1, sw2)
if sw1 == 0x91: status = 'normal processing, with extra info ' \
'containing a command for the terminal: length of the ' \
'response data %d' % sw2
elif sw1 == 0x9E: status = 'normal processing, SIM data download ' \
'error: length of the response data %d' % sw2
elif sw1 == 0x9F: status = 'normal processing: length of the ' \
'response data %d' % sw2
elif (sw1, sw2) == (0x93, 0x00): status = 'SIM application toolkit ' \
'busy, command cannot be executed at present'
elif sw1 == 0x92:
status = 'memory management'
if sw2 < 16: status += ': command successful but after %d '\
'retry routine' % sw2
elif sw2 == 0x40:
status += ': memory problem'
elif sw1 == 0x94:
status = 'referencing management'
if sw2 == 0x00: status += ': no EF selected'
elif sw2 == 0x02: status += ': out of range (invalid address)'
elif sw2 == 0x04: status += ': file ID or pattern not found'
elif sw2 == 0x08: status += ': file inconsistent with the command'
elif sw1 == 0x98:
status = 'security management'
if sw2 == 0x02: status += ': no CHV initialized'
elif sw2 == 0x04: status += ': access condition not fulfilled, ' \
'at least 1 attempt left'
elif sw2 == 0x08:
status += ': in contradiction with CHV status'
elif sw2 == 0x10: status += ': in contradiction with ' \
'invalidation status'
elif sw2 == 0x40: status += ': unsuccessful CHV verification, ' \
'no attempt left'
elif sw2 == 0x50: status += ': increase cannot be performed, ' \
'max value reached'
elif sw2 == 0x62: status += ': authentication error, ' \
'application specific'
elif sw2 == 0x63:
status += ': security session expired'
return status
def sw_status(sw1, sw2):
'''
sw_status(sw1=int, sw2=int) -> string
extends SW status bytes interpretation from ISO7816
with ETSI / 3GPP SW codes
helps to speak with the smartcard!
'''
status = ISO7816.sw_status(sw1, sw2)
if sw1 == 0x91: status = 'normal processing, with extra info ' \
'containing a command for the terminal: length of the ' \
'response data %d' % sw2
elif sw1 == 0x9E: status = 'normal processing, SIM data download ' \
'error: length of the response data %d' % sw2
elif sw1 == 0x9F: status = 'normal processing: length of the ' \
'response data %d' % sw2
elif (sw1, sw2) == (0x93, 0x00): status = 'SIM application toolkit ' \
'busy, command cannot be executed at present'
elif sw1 == 0x92 :
status = 'memory management'
if sw2 < 16: status += ': command successful but after %d '\
'retry routine' % sw2
elif sw2 == 0x40: status += ': memory problem'
elif sw1 == 0x94:
status = 'referencing management'
if sw2 == 0x00: status += ': no EF selected'
elif sw2 == 0x02: status += ': out of range (invalid address)'
elif sw2 == 0x04: status += ': file ID or pattern not found'
elif sw2 == 0x08: status += ': file inconsistent with the command'
elif sw1 == 0x98:
status = 'security management'
if sw2 == 0x02: status += ': no CHV initialized'
elif sw2 == 0x04: status += ': access condition not fulfilled, ' \
'at least 1 attempt left'
elif sw2 == 0x08: status += ': in contradiction with CHV status'
elif sw2 == 0x10: status += ': in contradiction with ' \
'invalidation status'
elif sw2 == 0x40: status += ': unsuccessful CHV verification, ' \
'no attempt left'
elif sw2 == 0x50: status += ': increase cannot be performed, ' \
'max value reached'
elif sw2 == 0x62: status += ': authentication error, ' \
'application specific'
elif sw2 == 0x63: status += ': security session expired'
return status
# Python library to work on
# USIM card
# communication based on ISO7816 card
# and commands and formats based on UICC card
#
# needs pyscard from:
# http://pyscard.sourceforge.net/
#################################
import hashlib
from optparse import OptionParser
import os
import random
import re
import sys
from card.ICC import ISO7816
if __name__ == '__main__':
def __init__(self):
'''
connect smartcard and defines class CLA code for communication
uses "pyscard" library services
creates self.CLA attribute with CLA code
and self.coms attribute with associated "apdu_stack" instance
'''
print "Checking ATR Value"
iso = ISO7816()
iso.ATR_scan()