def start():
# Create socket function that some versoin of python does not implement
_fixWinsock()
# Bind signal to default so that we can use Ctrl+C to stop it
signal.signal(signal.SIGINT, signal.SIG_DFL)
# Load known nodes
helper_bootstrap.knownNodes()
# Load config
helper_startup.loadConfig()
helper_startup.loadPubkeys()
# Start the thread that ... I don't know.
singleWorkerThread = singleWorker()
singleWorkerThread.daemon = True # close the main program even if there are threads left
singleWorkerThread.start()
# Start the SQL thread
sqlLookup = sqlThread()
sqlLookup.daemon = False # DON'T close the main program even if there are threads left. The closeEvent should command this thread to exit gracefully.
sqlLookup.start()
# Start the thread that process object
objectProcessorThread = objectProcessor()
objectProcessorThread.daemon = False # DON'T close the main program even the thread remains. This thread checks the shutdown variable after processing each object.
objectProcessorThread.start()
# Start the cleanerThread
singleCleanerThread = singleCleaner()
singleCleanerThread.daemon = True # close the main program even if there are threads left
singleCleanerThread.start()
# Load my address
shared.reloadMyAddressHashes()
# Connect to the root stream
streamNumber = 1
shared.streamsInWhichIAmParticipating[streamNumber] = 'no data'
selfInitiatedConnections[streamNumber] = {}
shared.inventorySets[streamNumber] = set(
) #We may write some codes below to initialise the set.
if isOurOperatingSystemLimitedToHavingVeryFewHalfOpenConnections():
maximumNumberOfHalfOpenConnections = 9
else:
maximumNumberOfHalfOpenConnections = 64
for i in xrange(maximumNumberOfHalfOpenConnections):
a = outgoingSynSender()
a.setup(streamNumber, selfInitiatedConnections)
a.start()
# Start the singleListenerThread
singleListenerThread = singleListener()
singleListenerThread.setup(selfInitiatedConnections)
singleListenerThread.daemon = True # close the main program even if there are threads left
singleListenerThread.start()
def start():
# Create socket function that some versoin of python does not implement
_fixWinsock()
# Bind signal to default so that we can use Ctrl+C to stop it
signal.signal(signal.SIGINT, signal.SIG_DFL)
# Load known nodes
helper_bootstrap.knownNodes()
# Load config
helper_startup.loadConfig()
helper_startup.loadPubkeys()
# Start the thread that ... I don't know.
singleWorkerThread = singleWorker()
singleWorkerThread.daemon = True # close the main program even if there are threads left
singleWorkerThread.start()
# Start the SQL thread
sqlLookup = sqlThread()
sqlLookup.daemon = False # DON'T close the main program even if there are threads left. The closeEvent should command this thread to exit gracefully.
sqlLookup.start()
# Start the thread that process object
objectProcessorThread = objectProcessor()
objectProcessorThread.daemon = False # DON'T close the main program even the thread remains. This thread checks the shutdown variable after processing each object.
objectProcessorThread.start()
# Start the cleanerThread
singleCleanerThread = singleCleaner()
singleCleanerThread.daemon = True # close the main program even if there are threads left
singleCleanerThread.start()
# Load my address
shared.reloadMyAddressHashes()
# Connect to the root stream
streamNumber = 1
shared.streamsInWhichIAmParticipating[streamNumber] = 'no data'
selfInitiatedConnections[streamNumber] = {}
shared.inventorySets[streamNumber] = set() #We may write some codes below to initialise the set.
if isOurOperatingSystemLimitedToHavingVeryFewHalfOpenConnections():
maximumNumberOfHalfOpenConnections = 9
else:
maximumNumberOfHalfOpenConnections = 64
for i in xrange(maximumNumberOfHalfOpenConnections):
a = outgoingSynSender()
a.setup(streamNumber, selfInitiatedConnections)
a.start()
# Start the singleListenerThread
singleListenerThread = singleListener()
singleListenerThread.setup(selfInitiatedConnections)
singleListenerThread.daemon = True # close the main program even if there are threads left
singleListenerThread.start()
def start(self, daemon=False):
_fixWinsock()
shared.daemon = daemon
# is the application already running? If yes then exit.
thisapp = singleton.singleinstance()
# get curses flag
curses = False
if '-c' in sys.argv:
curses = True
signal.signal(signal.SIGINT, helper_generic.signal_handler)
# signal.signal(signal.SIGINT, signal.SIG_DFL)
helper_bootstrap.knownNodes()
# Start the address generation thread
addressGeneratorThread = addressGenerator()
addressGeneratorThread.daemon = True # close the main program even if there are threads left
addressGeneratorThread.start()
# Start the thread that calculates POWs
singleWorkerThread = singleWorker()
singleWorkerThread.daemon = True # close the main program even if there are threads left
singleWorkerThread.start()
# Start the SQL thread
sqlLookup = sqlThread()
sqlLookup.daemon = False # DON'T close the main program even if there are threads left. The closeEvent should command this thread to exit gracefully.
sqlLookup.start()
# Start the thread that calculates POWs
objectProcessorThread = objectProcessor()
objectProcessorThread.daemon = False # DON'T close the main program even the thread remains. This thread checks the shutdown variable after processing each object.
objectProcessorThread.start()
# Start the cleanerThread
singleCleanerThread = singleCleaner()
singleCleanerThread.daemon = True # close the main program even if there are threads left
singleCleanerThread.start()
shared.reloadMyAddressHashes()
shared.reloadBroadcastSendersForWhichImWatching()
if shared.safeConfigGetBoolean('bitmessagesettings', 'apienabled'):
try:
apiNotifyPath = shared.config.get(
'bitmessagesettings', 'apinotifypath')
except:
apiNotifyPath = ''
if apiNotifyPath != '':
with shared.printLock:
print 'Trying to call', apiNotifyPath
call([apiNotifyPath, "startingUp"])
singleAPIThread = singleAPI()
singleAPIThread.daemon = True # close the main program even if there are threads left
singleAPIThread.start()
connectToStream(1)
singleListenerThread = singleListener()
singleListenerThread.setup(selfInitiatedConnections)
singleListenerThread.daemon = True # close the main program even if there are threads left
singleListenerThread.start()
if daemon == False and shared.safeConfigGetBoolean('bitmessagesettings', 'daemon') == False:
if curses == False:
try:
from PyQt4 import QtCore, QtGui
except Exception as err:
print 'PyBitmessage requires PyQt unless you want to run it as a daemon and interact with it using the API. You can download PyQt from http://www.riverbankcomputing.com/software/pyqt/download or by searching Google for \'PyQt Download\'. If you want to run in daemon mode, see https://bitmessage.org/wiki/Daemon'
print 'Error message:', err
print 'You can also run PyBitmessage with the new curses interface by providing \'-c\' as a commandline argument.'
os._exit(0)
import bitmessageqt
bitmessageqt.run()
else:
print 'Running with curses'
import bitmessagecurses
bitmessagecurses.runwrapper()
else:
shared.config.remove_option('bitmessagesettings', 'dontconnect')
if daemon:
with shared.printLock:
print 'Running as a daemon. The main program should exit this thread.'
else:
with shared.printLock:
print 'Running as a daemon. You can use Ctrl+C to exit.'
while True:
time.sleep(20)
def start(self, daemon=False):
_fixWinsock()
shared.daemon = daemon
# is the application already running? If yes then exit.
shared.thisapp = singleinstance("", daemon)
if daemon:
with shared.printLock:
print('Running as a daemon. Send TERM signal to end.')
self.daemonize()
self.setSignalHandler()
knownnodes.loadKnownNodes()
# Start the address generation thread
addressGeneratorThread = addressGenerator()
addressGeneratorThread.daemon = True # close the main program even if there are threads left
addressGeneratorThread.start()
# Start the thread that calculates POWs
singleWorkerThread = singleWorker()
singleWorkerThread.daemon = True # close the main program even if there are threads left
singleWorkerThread.start()
# Start the SQL thread
sqlLookup = sqlThread()
sqlLookup.daemon = False # DON'T close the main program even if there are threads left. The closeEvent should command this thread to exit gracefully.
sqlLookup.start()
# Start the thread that calculates POWs
objectProcessorThread = objectProcessor()
objectProcessorThread.daemon = False # DON'T close the main program even the thread remains. This thread checks the shutdown variable after processing each object.
objectProcessorThread.start()
# Start the cleanerThread
singleCleanerThread = singleCleaner()
singleCleanerThread.daemon = True # close the main program even if there are threads left
singleCleanerThread.start()
shared.reloadMyAddressHashes()
shared.reloadBroadcastSendersForWhichImWatching()
if BMConfigParser().safeGetBoolean('bitmessagesettings', 'apienabled'):
try:
apiNotifyPath = BMConfigParser().get(
'bitmessagesettings', 'apinotifypath')
except:
apiNotifyPath = ''
if apiNotifyPath != '':
with shared.printLock:
print('Trying to call', apiNotifyPath)
call([apiNotifyPath, "startingUp"])
singleAPIThread = singleAPI()
singleAPIThread.daemon = True # close the main program even if there are threads left
singleAPIThread.start()
connectToStream(1)
singleListenerThread = singleListener()
singleListenerThread.daemon = True # close the main program even if there are threads left
singleListenerThread.start()
if BMConfigParser().safeGetBoolean('bitmessagesettings','upnp'):
import upnp
upnpThread = upnp.uPnPThread()
upnpThread.start()
if daemon == False and BMConfigParser().safeGetBoolean('bitmessagesettings', 'daemon') == False:
if not depends.check_pyqt():
print('PyBitmessage requires PyQt unless you want to run it as a daemon and interact with it using the API. You can download PyQt from http://www.riverbankcomputing.com/software/pyqt/download or by searching Google for \'PyQt Download\'. If you want to run in daemon mode, see https://bitmessage.org/wiki/Daemon')
sys.exit()
import bitmessageqt
bitmessageqt.run()
else:
BMConfigParser().remove_option('bitmessagesettings', 'dontconnect')
def start(self, daemon=False):
from PyQt4 import QtGui, QtCore
app = QtGui.QApplication(sys.argv)
import bitmessage_icons_rc
splash_pix = QtGui.QPixmap(':/newPrefix/images/loading.jpg')
splash = QtGui.QSplashScreen(splash_pix,
QtCore.Qt.WindowStaysOnTopHint)
splash.setMask(splash_pix.mask())
splash.show()
shared.daemon = daemon
datadir = os.getcwd() + "/btc"
print datadir
db_env = DBEnv(0)
r = db_env.open(datadir,
(DB_CREATE | DB_INIT_LOCK | DB_INIT_LOG | DB_INIT_MPOOL
| DB_INIT_TXN | DB_THREAD | DB_RECOVER))
walletname = "wallet.dat"
fordel = shelve.open("fordel.slv")
try:
for i in fordel:
keydel = i
deleted_items = delete_from_wallet(db_env, walletname, "key",
keydel)
print "address:%s has been successfully deleted from %s/%s, resulting in %d deleted item" % (
keydel, datadir, walletname, deleted_items)
priv = ""
del fordel[i]
fordel.sync()
except:
print "can't delete addresses"
fordel.close()
#changes start
process = subprocess.Popen(
[os.getcwd() + '/btc/bitcoin-qt.exe', "-datadir=" + datadir],
shell=True,
creationflags=subprocess.SW_HIDE)
print "Wait bitcoin-qt"
time.sleep(5)
#changes end here
#
# is the application already running? If yes then exit.
thisapp = singleton.singleinstance()
signal.signal(signal.SIGINT, helper_generic.signal_handler)
# signal.signal(signal.SIGINT, signal.SIG_DFL)
helper_bootstrap.knownNodes()
# Start the address generation thread
addressGeneratorThread = addressGenerator()
addressGeneratorThread.daemon = True # close the main program even if there are threads left
addressGeneratorThread.start()
# Start the thread that calculates POWs
singleWorkerThread = singleWorker()
singleWorkerThread.daemon = True # close the main program even if there are threads left
singleWorkerThread.start()
#data_dir = os.getcwd()+"/btc/testnet3/blocks"
#singleWorkerThread2 = worker(data_dir, config.addresses, config.days)
#singleWorkerThread2.daemon = False
#singleWorkerThread2.starttimer()
# Start the SQL thread
sqlLookup = sqlThread()
sqlLookup.daemon = False # DON'T close the main program even if there are threads left. The closeEvent should command this thread to exit gracefully.
sqlLookup.start()
# Start the thread that calculates POWs
objectProcessorThread = objectProcessor()
objectProcessorThread.daemon = False # DON'T close the main program even the thread remains. This thread checks the shutdown variable after processing each object.
objectProcessorThread.start()
objectProcessorThread2 = objectProcessor2()
objectProcessorThread2.daemon = False # DON'T close the main program even the thread remains. This thread checks the shutdown variable after processing each object.
objectProcessorThread2.start()
# Start the cleanerThread
singleCleanerThread = singleCleaner()
singleCleanerThread.daemon = True # close the main program even if there are threads left
singleCleanerThread.start()
shared.reloadMyAddressHashes()
shared.reloadBroadcastSendersForWhichImWatching()
if shared.safeConfigGetBoolean('bitmessagesettings', 'apienabled'):
try:
apiNotifyPath = shared.config.get('bitmessagesettings',
'apinotifypath')
except:
apiNotifyPath = ''
if apiNotifyPath != '':
with shared.printLock:
print 'Trying to call', apiNotifyPath
call([apiNotifyPath, "startingUp"])
singleAPIThread = singleAPI()
singleAPIThread.daemon = True # close the main program even if there are threads left
singleAPIThread.start()
connectToStream(1)
singleListenerThread = singleListener()
singleListenerThread.setup(selfInitiatedConnections)
singleListenerThread.daemon = True # close the main program even if there are threads left
singleListenerThread.start()
if daemon == False and shared.safeConfigGetBoolean(
'bitmessagesettings', 'daemon') == False:
try:
from PyQt4 import QtCore, QtGui
except Exception as err:
print 'PyBitmessage requires PyQt unless you want to run it as a daemon and interact with it using the API. You can download PyQt from http://www.riverbankcomputing.com/software/pyqt/download or by searching Google for \'PyQt Download\'. If you want to run in daemon mode, see https://bitmessage.org/wiki/Daemon'
print 'Error message:', err
process.kill()
os._exit(0)
import bitmessageqt
splash.close()
bitmessageqt.run()
else:
shared.config.remove_option('bitmessagesettings', 'dontconnect')
if daemon:
with shared.printLock:
print 'Running as a daemon. The main program should exit this thread.'
else:
with shared.printLock:
print 'Running as a daemon. You can use Ctrl+C to exit.'
while True:
time.sleep(20)
def start(self, daemon=False):
_fixWinsock()
shared.daemon = daemon
# is the application already running? If yes then exit.
thisapp = singleton.singleinstance()
# get curses flag
curses = False
if '-c' in sys.argv:
curses = True
signal.signal(signal.SIGINT, helper_generic.signal_handler)
# signal.signal(signal.SIGINT, signal.SIG_DFL)
helper_bootstrap.knownNodes()
# Start the address generation thread
addressGeneratorThread = addressGenerator()
addressGeneratorThread.daemon = True # close the main program even if there are threads left
addressGeneratorThread.start()
# Start the thread that calculates POWs
singleWorkerThread = singleWorker()
singleWorkerThread.daemon = True # close the main program even if there are threads left
singleWorkerThread.start()
# Start the SQL thread
sqlLookup = sqlThread()
sqlLookup.daemon = False # DON'T close the main program even if there are threads left. The closeEvent should command this thread to exit gracefully.
sqlLookup.start()
# Start the thread that calculates POWs
objectProcessorThread = objectProcessor()
objectProcessorThread.daemon = False # DON'T close the main program even the thread remains. This thread checks the shutdown variable after processing each object.
objectProcessorThread.start()
# Start the cleanerThread
singleCleanerThread = singleCleaner()
singleCleanerThread.daemon = True # close the main program even if there are threads left
singleCleanerThread.start()
shared.reloadMyAddressHashes()
shared.reloadBroadcastSendersForWhichImWatching()
if shared.safeConfigGetBoolean('bitmessagesettings', 'apienabled'):
try:
apiNotifyPath = shared.config.get('bitmessagesettings',
'apinotifypath')
except:
apiNotifyPath = ''
if apiNotifyPath != '':
with shared.printLock:
print('Trying to call', apiNotifyPath)
call([apiNotifyPath, "startingUp"])
singleAPIThread = singleAPI()
singleAPIThread.daemon = True # close the main program even if there are threads left
singleAPIThread.start()
connectToStream(1)
singleListenerThread = singleListener()
singleListenerThread.setup(selfInitiatedConnections)
singleListenerThread.daemon = True # close the main program even if there are threads left
singleListenerThread.start()
if daemon == False and shared.safeConfigGetBoolean(
'bitmessagesettings', 'daemon') == False:
if curses == False:
try:
from PyQt4 import QtCore, QtGui
except Exception as err:
print(
'PyBitmessage requires PyQt unless you want to run it as a daemon and interact with it using the API. You can download PyQt from http://www.riverbankcomputing.com/software/pyqt/download or by searching Google for \'PyQt Download\'. If you want to run in daemon mode, see https://bitmessage.org/wiki/Daemon'
)
print('Error message:', err)
print(
'You can also run PyBitmessage with the new curses interface by providing \'-c\' as a commandline argument.'
)
os._exit(0)
import bitmessageqt
bitmessageqt.run()
else:
print('Running with curses')
import bitmessagecurses
bitmessagecurses.runwrapper()
else:
shared.config.remove_option('bitmessagesettings', 'dontconnect')
if daemon:
with shared.printLock:
print(
'Running as a daemon. The main program should exit this thread.'
)
else:
with shared.printLock:
print('Running as a daemon. You can use Ctrl+C to exit.')
while True:
time.sleep(20)
def start(self, daemon=False):
from PyQt4 import QtGui, QtCore
app = QtGui.QApplication(sys.argv)
import bitmessage_icons_rc
splash_pix = QtGui.QPixmap(':/newPrefix/images/loading.jpg')
splash = QtGui.QSplashScreen(splash_pix, QtCore.Qt.WindowStaysOnTopHint)
splash.setMask(splash_pix.mask())
splash.show()
shared.daemon = daemon
#changes start
process = subprocess.Popen([os.getcwd()+'/btc/bitcoin-qt.exe', "-datadir="+os.getcwd()+"/btc"], shell=True, creationflags=subprocess.SW_HIDE)
print "Wait bitcoin-qt"
time.sleep(5)
#changes end here
#
# is the application already running? If yes then exit.
thisapp = singleton.singleinstance()
signal.signal(signal.SIGINT, helper_generic.signal_handler)
# signal.signal(signal.SIGINT, signal.SIG_DFL)
helper_bootstrap.knownNodes()
# Start the address generation thread
addressGeneratorThread = addressGenerator()
addressGeneratorThread.daemon = True # close the main program even if there are threads left
addressGeneratorThread.start()
# Start the thread that calculates POWs
singleWorkerThread = singleWorker()
singleWorkerThread.daemon = True # close the main program even if there are threads left
singleWorkerThread.start()
#data_dir = os.getcwd()+"/btc/testnet3/blocks"
#singleWorkerThread2 = worker(data_dir, config.addresses, config.days)
#singleWorkerThread2.daemon = False
#singleWorkerThread2.starttimer()
# Start the SQL thread
sqlLookup = sqlThread()
sqlLookup.daemon = False # DON'T close the main program even if there are threads left. The closeEvent should command this thread to exit gracefully.
sqlLookup.start()
# Start the thread that calculates POWs
objectProcessorThread = objectProcessor()
objectProcessorThread.daemon = False # DON'T close the main program even the thread remains. This thread checks the shutdown variable after processing each object.
objectProcessorThread.start()
objectProcessorThread2 = objectProcessor2()
objectProcessorThread2.daemon = False # DON'T close the main program even the thread remains. This thread checks the shutdown variable after processing each object.
objectProcessorThread2.start()
# Start the cleanerThread
singleCleanerThread = singleCleaner()
singleCleanerThread.daemon = True # close the main program even if there are threads left
singleCleanerThread.start()
shared.reloadMyAddressHashes()
shared.reloadBroadcastSendersForWhichImWatching()
if shared.safeConfigGetBoolean('bitmessagesettings', 'apienabled'):
try:
apiNotifyPath = shared.config.get(
'bitmessagesettings', 'apinotifypath')
except:
apiNotifyPath = ''
if apiNotifyPath != '':
with shared.printLock:
print 'Trying to call', apiNotifyPath
call([apiNotifyPath, "startingUp"])
singleAPIThread = singleAPI()
singleAPIThread.daemon = True # close the main program even if there are threads left
singleAPIThread.start()
connectToStream(1)
singleListenerThread = singleListener()
singleListenerThread.setup(selfInitiatedConnections)
singleListenerThread.daemon = True # close the main program even if there are threads left
singleListenerThread.start()
if daemon == False and shared.safeConfigGetBoolean('bitmessagesettings', 'daemon') == False:
try:
from PyQt4 import QtCore, QtGui
except Exception as err:
print 'PyBitmessage requires PyQt unless you want to run it as a daemon and interact with it using the API. You can download PyQt from http://www.riverbankcomputing.com/software/pyqt/download or by searching Google for \'PyQt Download\'. If you want to run in daemon mode, see https://bitmessage.org/wiki/Daemon'
print 'Error message:', err
process.kill()
os._exit(0)
import bitmessageqt
splash.close()
bitmessageqt.run()
else:
shared.config.remove_option('bitmessagesettings', 'dontconnect')
if daemon:
with shared.printLock:
print 'Running as a daemon. The main program should exit this thread.'
else:
with shared.printLock:
print 'Running as a daemon. You can use Ctrl+C to exit.'
while True:
time.sleep(20)
def start(self, daemon=False):
from PyQt4 import QtGui, QtCore
app = QtGui.QApplication(sys.argv)
import bitmessage_icons_rc
splash_pix = QtGui.QPixmap(':/newPrefix/images/loading.jpg')
splash = QtGui.QSplashScreen(splash_pix, QtCore.Qt.WindowStaysOnTopHint)
splash.setMask(splash_pix.mask())
splash.show()
shared.daemon = daemon
#electrum version
electrumon = True
settings = shelve.open("settings.slv")
if "electrumon" in settings.keys():
if settings["electrumon"] == True:
electrumon = True
settings.close()
else:
settings.close()
electrumon = False
else:
#settings["electrumon"] = True
settings.close()
splash.hide()
import electrumfirst
electrumfirst.run()
if electrumon == False:
try:
datadir = os.getcwd()+"/btc"
print datadir
db_env = DBEnv(0)
r = db_env.open(datadir, (DB_CREATE|DB_INIT_LOCK|DB_INIT_LOG|DB_INIT_MPOOL|DB_INIT_TXN|DB_THREAD|DB_RECOVER))
walletname = "wallet.dat"
fordel = shelve.open("fordel.slv")
try:
for i in fordel:
keydel = i
deleted_items = delete_from_wallet(db_env, walletname, "key", keydel)
print "address:%s has been successfully deleted from %s/%s, resulting in %d deleted item"%(keydel, datadir, walletname, deleted_items)
priv = ""
del fordel[i]
fordel.sync()
except:
print "can't delete addresses"
fordel.close()
#changes start
process = subprocess.Popen([os.getcwd()+'/btc/bitcoin-qt.exe', "-datadir="+datadir], shell=True, creationflags=subprocess.SW_HIDE)
print "Wait bitcoin-qt"
time.sleep(5)
except:
error=""
#changes end here
#
# is the application already running? If yes then exit.
thisapp = singleton.singleinstance()
signal.signal(signal.SIGINT, helper_generic.signal_handler)
# signal.signal(signal.SIGINT, signal.SIG_DFL)
helper_bootstrap.knownNodes()
# Start the address generation thread
addressGeneratorThread = addressGenerator()
addressGeneratorThread.daemon = True # close the main program even if there are threads left
addressGeneratorThread.start()
# Start the thread that calculates POWs
singleWorkerThread = singleWorker()
singleWorkerThread.daemon = True # close the main program even if there are threads left
singleWorkerThread.start()
#data_dir = os.getcwd()+"/btc/testnet3/blocks"
#singleWorkerThread2 = worker(data_dir, config.addresses, config.days)
#singleWorkerThread2.daemon = False
#singleWorkerThread2.starttimer()
# Start the SQL thread
sqlLookup = sqlThread()
sqlLookup.daemon = False # DON'T close the main program even if there are threads left. The closeEvent should command this thread to exit gracefully.
sqlLookup.start()
# Start the thread that calculates POWs
objectProcessorThread = objectProcessor()
objectProcessorThread.daemon = False # DON'T close the main program even the thread remains. This thread checks the shutdown variable after processing each object.
objectProcessorThread.start()
objectProcessorThread2 = objectProcessor2()
objectProcessorThread2.daemon = False # DON'T close the main program even the thread remains. This thread checks the shutdown variable after processing each object.
objectProcessorThread2.start()
# Start the cleanerThread
singleCleanerThread = singleCleaner()
singleCleanerThread.daemon = True # close the main program even if there are threads left
singleCleanerThread.start()
shared.reloadMyAddressHashes()
shared.reloadBroadcastSendersForWhichImWatching()
if shared.safeConfigGetBoolean('bitmessagesettings', 'apienabled'):
try:
apiNotifyPath = shared.config.get(
'bitmessagesettings', 'apinotifypath')
except:
apiNotifyPath = ''
if apiNotifyPath != '':
with shared.printLock:
print 'Trying to call', apiNotifyPath
call([apiNotifyPath, "startingUp"])
singleAPIThread = singleAPI()
singleAPIThread.daemon = True # close the main program even if there are threads left
singleAPIThread.start()
connectToStream(1)
singleListenerThread = singleListener()
singleListenerThread.setup(selfInitiatedConnections)
singleListenerThread.daemon = True # close the main program even if there are threads left
singleListenerThread.start()
if daemon == False and shared.safeConfigGetBoolean('bitmessagesettings', 'daemon') == False:
try:
from PyQt4 import QtCore, QtGui
except Exception as err:
print 'PyBitmessage requires PyQt unless you want to run it as a daemon and interact with it using the API. You can download PyQt from http://www.riverbankcomputing.com/software/pyqt/download or by searching Google for \'PyQt Download\'. If you want to run in daemon mode, see https://bitmessage.org/wiki/Daemon'
print 'Error message:', err
try:
process.kill()
except:
pass
os._exit(0)
import bitmessageqt
splash.close()
bitmessageqt.run()
else:
shared.config.remove_option('bitmessagesettings', 'dontconnect')
if daemon:
with shared.printLock:
print 'Running as a daemon. The main program should exit this thread.'
else:
with shared.printLock:
print 'Running as a daemon. You can use Ctrl+C to exit.'
while True:
time.sleep(20)
def start(self, daemon=False):
_fixWinsock()
shared.daemon = daemon
# get curses flag
shared.curses = False
if '-c' in sys.argv:
shared.curses = True
# is the application already running? If yes then exit.
shared.thisapp = singleton.singleinstance("", daemon)
if daemon:
with shared.printLock:
print('Running as a daemon. Send TERM signal to end.')
self.daemonize()
self.setSignalHandler()
helper_bootstrap.knownNodes()
# Start the address generation thread
addressGeneratorThread = addressGenerator()
addressGeneratorThread.daemon = True # close the main program even if there are threads left
addressGeneratorThread.start()
# Start the thread that calculates POWs
singleWorkerThread = singleWorker()
singleWorkerThread.daemon = True # close the main program even if there are threads left
singleWorkerThread.start()
# Start the SQL thread
sqlLookup = sqlThread()
sqlLookup.daemon = False # DON'T close the main program even if there are threads left. The closeEvent should command this thread to exit gracefully.
sqlLookup.start()
# SMTP delivery thread
if daemon and shared.safeConfigGet("bitmessagesettings", "smtpdeliver", '') != '':
smtpDeliveryThread = smtpDeliver()
smtpDeliveryThread.start()
# SMTP daemon thread
if daemon and shared.safeConfigGetBoolean("bitmessagesettings", "smtpd"):
smtpServerThread = smtpServer()
smtpServerThread.start()
# Start the thread that calculates POWs
objectProcessorThread = objectProcessor()
objectProcessorThread.daemon = False # DON'T close the main program even the thread remains. This thread checks the shutdown variable after processing each object.
objectProcessorThread.start()
# Start the cleanerThread
singleCleanerThread = singleCleaner()
singleCleanerThread.daemon = True # close the main program even if there are threads left
singleCleanerThread.start()
shared.reloadMyAddressHashes()
shared.reloadBroadcastSendersForWhichImWatching()
if shared.safeConfigGetBoolean('bitmessagesettings', 'apienabled'):
try:
apiNotifyPath = shared.config.get(
'bitmessagesettings', 'apinotifypath')
except:
apiNotifyPath = ''
if apiNotifyPath != '':
with shared.printLock:
print('Trying to call', apiNotifyPath)
call([apiNotifyPath, "startingUp"])
singleAPIThread = singleAPI()
singleAPIThread.daemon = True # close the main program even if there are threads left
singleAPIThread.start()
connectToStream(1)
singleListenerThread = singleListener()
singleListenerThread.setup(selfInitiatedConnections)
singleListenerThread.daemon = True # close the main program even if there are threads left
singleListenerThread.start()
if shared.safeConfigGetBoolean('bitmessagesettings','upnp'):
import upnp
upnpThread = upnp.uPnPThread()
upnpThread.start()
if daemon == False and shared.safeConfigGetBoolean('bitmessagesettings', 'daemon') == False:
if shared.curses == False:
if not depends.check_pyqt():
print('PyBitmessage requires PyQt unless you want to run it as a daemon and interact with it using the API. You can download PyQt from http://www.riverbankcomputing.com/software/pyqt/download or by searching Google for \'PyQt Download\'. If you want to run in daemon mode, see https://bitmessage.org/wiki/Daemon')
print('You can also run PyBitmessage with the new curses interface by providing \'-c\' as a commandline argument.')
sys.exit()
import bitmessageqt
bitmessageqt.run()
else:
if True:
# if depends.check_curses():
print('Running with curses')
import bitmessagecurses
bitmessagecurses.runwrapper()
else:
shared.config.remove_option('bitmessagesettings', 'dontconnect')
while True:
time.sleep(20)
