def welch_pw2(img, win_size=512, overlp_x=50, overlp_y=50, edge_x=0, edge_y=0): """ Calculate the power spectrum using Welch periodograms (overlapped periodogram) """ from fundamentals import window2d, ramp from EMAN2 import periodogram nx = img.get_xsize() ny = img.get_ysize() nx_fft = smallprime(nx) ny_fft = smallprime(ny) img1 = window2d(img,nx_fft,ny_fft,"l") x_gaussian_hi = 1./win_size del img from filter import filt_gaussh from utilities import info, drop_image e_fil = filt_gaussh(img1, x_gaussian_hi) x38 = 100/(100-overlp_x) # normalization of % of the overlap in x x39 = 100/(100-overlp_y) # normalization of % of the overlap in y x26 = int(x38*((nx-2*edge_x)/win_size-1)+1) # number of pieces horizontal dim.(X) x29 = int(x39*((ny-2*edge_y)/win_size-1)+1) # number of pieces vertical dim.(Y) iz = 0 pw2 = EMData() for iy in xrange(1, x29+1): x21 = (win_size/x39)*(iy-1) + edge_y # y-direction it should start from 0 if edge_y=0 for ix in xrange(1, x26+1): x22 = (win_size/x38)*(ix-1) + edge_x # x-direction it should start from 0 if edge_x =0 wi = window2d(e_fil, win_size, win_size, "l", x22, x21) ra = ramp(wi) iz = iz+1 if (iz == 1): pw2 = periodogram(ra) else: pw2 += periodogram(ra) return pw2/float(iz)
def image_decimate(img, decimation=2, fit_to_fft = True, frequency_low=0, frequency_high=0):
"""
Window 2D image to FFT-friendly size, apply Butterworth low pass filter,
and decimate image by integer factor
"""
from filter import filt_btwl
from fundamentals import smallprime, window2d
from utilities import get_image
if type(img) == str: img=get_image(img)
nz = img.get_zsize()
if( nz > 1): ERROR("This command works only for 2-D images", "image_decimate", 1)
if decimation <= 1 : ERROR("Improper decimation ratio", "image_decimate", 1)
if(decimation == 1.0): return img.copy()
if frequency_low <= 0 :
frequency_low = 0.5/decimation-0.02
if frequency_low <= 0 : ERROR("Butterworth pass-band frequency is too low","image_decimation",1)
frequency_high = min(0.5/decimation + 0.02, 0.499)
if fit_to_fft:
nx = img.get_xsize()
ny = img.get_ysize()
nx_fft_m = smallprime(nx)
ny_fft_m = smallprime(ny)
e = Util.window(img, nx_fft_m, ny_fft_m, 1, 0,0,0)
e = filt_btwl(e, frequency_low, frequency_high)
else:
e = filt_btwl(img, frequency_low, frequency_high)
return Util.decimate(e, int(decimation), int(decimation), 1)
def image_decimate(img, decimation=2, fit_to_fft = True, frequency_low=0, frequency_high=0):
"""
Window 2D image to FFT-friendly size, apply Butterworth low pass filter,
and decimate image by integer factor
"""
from filter import filt_btwl
from fundamentals import smallprime, window2d
from utilities import get_image
if type(img) == str: img=get_image(img)
nz = img.get_zsize()
if( nz > 1): ERROR("This command works only for 2-D images", "image_decimate", 1)
if decimation <= 1 : ERROR("Improper decimation ratio", "image_decimate", 1)
if(decimation == 1.0): return img.copy()
if frequency_low <= 0 :
frequency_low = 0.5/decimation-0.02
if frequency_low <= 0 : ERROR("Butterworth passband frequency is too low","image_decimation",1)
frequency_high = min(0.5/decimation + 0.02, 0.499)
if fit_to_fft:
nx = img.get_xsize()
ny = img.get_ysize()
nx_fft_m = smallprime(nx)
ny_fft_m = smallprime(ny)
e = Util.window(img, nx_fft_m, ny_fft_m, 1, 0,0,0)
e = filt_btwl(e, frequency_low, frequency_high)
else:
e = filt_btwl(img, frequency_low, frequency_high)
return Util.decimate(e, int(decimation), int(decimation), 1)
def tilemic(img, win_size=512, overlp_x=50, overlp_y=50, edge_x=0, edge_y=0): """ Calculate the power spectrum using Welch periodograms (overlapped periodogram) """ from fundamentals import window2d, ramp from EMAN2 import periodogram nx = img.get_xsize() ny = img.get_ysize() nx_fft = smallprime(nx) ny_fft = smallprime(ny) x_gaussian_hi = 1./win_size from filter import filt_gaussh e_fil = filt_gaussh(window2d(img,nx_fft,ny_fft,"l"), x_gaussian_hi) x38 = 100/(100-overlp_x) # normalization of % of the overlap in x x39 = 100/(100-overlp_y) # normalization of % of the overlap in y x26 = int(x38*((nx-2*edge_x)/win_size-1)+1) # number of pieces horizontal dim.(X) x29 = int(x39*((ny-2*edge_y)/win_size-1)+1) # number of pieces vertical dim.(Y) pw2 = [] for iy in xrange(1, x29+1): x21 = (win_size/x39)*(iy-1) + edge_y # y-direction it should start from 0 if edge_y=0 for ix in xrange(1, x26+1): x22 = (win_size/x38)*(ix-1) + edge_x # x-direction it should start from 0 if edge_x =0 wi = ramp( window2d(e_fil, win_size, win_size, "l", x22, x21) ) st = Util.infomask(wi, None, True) wi = (wi - st[0])/st[1]*win_size pw2.append(periodogram(wi)) return pw2
def welch_pw2(img, win_size=512, overlp_x=50, overlp_y=50, edge_x=0, edge_y=0): """ Calculate the power spectrum using Welch periodograms (overlapped periodogram) """ from fundamentals import window2d, ramp from EMAN2 import periodogram nx = img.get_xsize() ny = img.get_ysize() nx_fft = smallprime(nx) ny_fft = smallprime(ny) x_gaussian_hi = 1./win_size from filter import filt_gaussh e_fil = filt_gaussh(window2d(img,nx_fft,ny_fft,"l"), x_gaussian_hi) x38 = 100/(100-overlp_x) # normalization of % of the overlap in x x39 = 100/(100-overlp_y) # normalization of % of the overlap in y x26 = int(x38*((nx-2*edge_x)/win_size-1)+1) # number of pieces horizontal dim.(X) x29 = int(x39*((ny-2*edge_y)/win_size-1)+1) # number of pieces vertical dim.(Y) iz = 0 pw2 = EMData() for iy in xrange(1, x29+1): x21 = (win_size/x39)*(iy-1) + edge_y # y-direction it should start from 0 if edge_y=0 for ix in xrange(1, x26+1): x22 = (win_size/x38)*(ix-1) + edge_x # x-direction it should start from 0 if edge_x =0 wi = window2d(e_fil, win_size, win_size, "l", x22, x21) iz = iz+1 if (iz == 1): pw2 = periodogram(ramp(wi)) else: pw2 += periodogram(ramp(wi)) return pw2/float(iz)
def welch_pw2_tilt_band(img,
theta,
num_bnd=-1,
overlp_y=50,
edge_x=0,
edge_y=0,
win_s=256):
"""
1. Calculate the power spectra of tilt bands
2. The tilt micrograph is rotated such that the tilt axis is vertical (along Y axis)
3. edge_x and edge_y are removed from the micrograph
"""
from EMAN2 import periodogram
nx = img.get_xsize()
ny = img.get_ysize()
num1 = int(nx - 2 * edge_x)
num2 = int(ny - 2 * edge_y)
nx_fft = smallprime(num1)
ny_fft = smallprime(num2)
img1 = window2d(img, nx_fft, ny_fft, "l", edge_x, edge_y)
if (num_bnd == -1):
num_bnd = int(nx_fft / win_s)
win_x = int(win_s)
else:
win_x = int(nx_fft / num_bnd)
win_x = int(smallprime(win_x))
win_y = win_x
x_gaussian_hi = 1. / win_x
del img
from filter import filt_gaussh
from utilities import drop_image, rot_image
# The input img is rotated such that tilt axis is vertical
img2 = rot_image(img1, theta, 0, 0, 1.0, 1.0)
e_fil = filt_gaussh(img2, x_gaussian_hi)
del img1
del img2
x39 = 100 / (100 - overlp_y) # normalization of % of the overlap in y
x29 = int(x39 * ((ny) / win_y - 1) +
1) # number of pieces vertical dim.(Y)
pw2 = EMData()
pw2_band = []
for ix in xrange(1, num_bnd + 1):
x22 = (win_x) * (ix - 1
) # x-direction it should start from 0 if edge_x =0
iz = 0
for iy in xrange(1, x29 + 1):
x21 = (win_y / x39) * (
iy - 1) # y-direction it should start from 0 if edge_y=0
wi = window2d(e_fil, win_x, win_y, "l", x22, x21)
iz = iz + 1
if (iz == 1): pw2 = periodogram(ramp(wi))
else: pw2 += periodogram(ramp(wi))
pw2 /= float(iz)
# drop_image(pw2,"band%03d"%(ix))
pw2_band.append(pw2)
return pw2_band
def welch_pw2_tilt_band(img,theta,num_bnd=-1,overlp_y=50,edge_x=0,edge_y=0,win_s=256): """ 1. Calculate the power spectra of tilt bands 2. The tilt micrograph is rotated such that the tilt axis is vertical (along Y axis) 3. edge_x and edge_y are removed from the micrograph """ from EMAN2 import periodogram nx = img.get_xsize() ny = img.get_ysize() num1 = int(nx-2*edge_x) num2 = int(ny-2*edge_y) nx_fft = smallprime(num1) ny_fft = smallprime(num2) img1 = window2d(img,nx_fft,ny_fft,"l",edge_x,edge_y) if(num_bnd == -1): num_bnd = int(nx_fft/win_s) win_x = int(win_s) else: win_x = int(nx_fft/num_bnd) win_x = int(smallprime(win_x)) win_y = win_x x_gaussian_hi = 1./win_x del img from filter import filt_gaussh from utilities import drop_image, rot_image # The input img is rotated such that tilt axis is vertical img2 = rot_image(img1,theta, 0, 0, 1.0,1.0) e_fil = filt_gaussh(img2, x_gaussian_hi) del img1 del img2 x39 = 100/(100-overlp_y) # normalization of % of the overlap in y x29 = int(x39*((ny)/win_y-1)+1) # number of pieces vertical dim.(Y) pw2 = EMData() pw2_band = [] for ix in xrange(1, num_bnd+1): x22 = (win_x)*(ix-1)# x-direction it should start from 0 if edge_x =0 iz=0 for iy in xrange(1, x29+1): x21 = (win_y/x39)*(iy-1) # y-direction it should start from 0 if edge_y=0 wi = window2d(e_fil,win_x, win_y,"l",x22, x21) ra = ramp(wi) iz = iz+1 if (iz == 1): pw2 = periodogram(ra) else: pw2 += periodogram(ra) pw2/=float(iz) # drop_image(pw2,"band%03d"%(ix)) pw2_band.append(pw2) return pw2_band
def main():
def params_3D_2D_NEW(phi, theta, psi, s2x, s2y, mirror):
# the final ali2d parameters already combine shifts operation first and rotation operation second for parameters converted from 3D
if mirror:
m = 1
alpha, sx, sy, scalen = compose_transform2(0, s2x, s2y, 1.0, 540.0-psi, 0, 0, 1.0)
else:
m = 0
alpha, sx, sy, scalen = compose_transform2(0, s2x, s2y, 1.0, 360.0-psi, 0, 0, 1.0)
return alpha, sx, sy, m
progname = os.path.basename(sys.argv[0])
usage = progname + " prj_stack --ave2D= --var2D= --ave3D= --var3D= --img_per_grp= --fl= --aa= --sym=symmetry --CTF"
parser = OptionParser(usage, version=SPARXVERSION)
parser.add_option("--output_dir", type="string" , default="./", help="Output directory")
parser.add_option("--ave2D", type="string" , default=False, help="Write to the disk a stack of 2D averages")
parser.add_option("--var2D", type="string" , default=False, help="Write to the disk a stack of 2D variances")
parser.add_option("--ave3D", type="string" , default=False, help="Write to the disk reconstructed 3D average")
parser.add_option("--var3D", type="string" , default=False, help="Compute 3D variability (time consuming!)")
parser.add_option("--img_per_grp", type="int" , default=100, help="Number of neighbouring projections.(Default is 100)")
parser.add_option("--no_norm", action="store_true", default=False, help="Do not use normalization.(Default is to apply normalization)")
#parser.add_option("--radius", type="int" , default=-1 , help="radius for 3D variability" )
parser.add_option("--npad", type="int" , default=2 , help="Number of time to pad the original images.(Default is 2 times padding)")
parser.add_option("--sym" , type="string" , default="c1", help="Symmetry. (Default is no symmetry)")
parser.add_option("--fl", type="float" , default=0.0, help="Low pass filter cutoff in absolute frequency (0.0 - 0.5) and is applied to decimated images. (Default - no filtration)")
parser.add_option("--aa", type="float" , default=0.02 , help="Fall off of the filter. Use default value if user has no clue about falloff (Default value is 0.02)")
parser.add_option("--CTF", action="store_true", default=False, help="Use CFT correction.(Default is no CTF correction)")
#parser.add_option("--MPI" , action="store_true", default=False, help="use MPI version")
#parser.add_option("--radiuspca", type="int" , default=-1 , help="radius for PCA" )
#parser.add_option("--iter", type="int" , default=40 , help="maximum number of iterations (stop criterion of reconstruction process)" )
#parser.add_option("--abs", type="float" , default=0.0 , help="minimum average absolute change of voxels' values (stop criterion of reconstruction process)" )
#parser.add_option("--squ", type="float" , default=0.0 , help="minimum average squared change of voxels' values (stop criterion of reconstruction process)" )
parser.add_option("--VAR" , action="store_true", default=False, help="Stack of input consists of 2D variances (Default False)")
parser.add_option("--decimate", type ="float", default=0.25, help="Image decimate rate, a number less than 1. (Default is 0.25)")
parser.add_option("--window", type ="int", default=0, help="Target image size relative to original image size. (Default value is zero.)")
#parser.add_option("--SND", action="store_true", default=False, help="compute squared normalized differences (Default False)")
#parser.add_option("--nvec", type="int" , default=0 , help="Number of eigenvectors, (Default = 0 meaning no PCA calculated)")
parser.add_option("--symmetrize", action="store_true", default=False, help="Prepare input stack for handling symmetry (Default False)")
parser.add_option("--overhead", type ="float", default=0.5, help="python overhead per CPU.")
(options,args) = parser.parse_args()
#####
from mpi import mpi_init, mpi_comm_rank, mpi_comm_size, mpi_recv, MPI_COMM_WORLD
from mpi import mpi_barrier, mpi_reduce, mpi_bcast, mpi_send, MPI_FLOAT, MPI_SUM, MPI_INT, MPI_MAX
#from mpi import *
from applications import MPI_start_end
from reconstruction import recons3d_em, recons3d_em_MPI
from reconstruction import recons3d_4nn_MPI, recons3d_4nn_ctf_MPI
from utilities import print_begin_msg, print_end_msg, print_msg
from utilities import read_text_row, get_image, get_im, wrap_mpi_send, wrap_mpi_recv
from utilities import bcast_EMData_to_all, bcast_number_to_all
from utilities import get_symt
# This is code for handling symmetries by the above program. To be incorporated. PAP 01/27/2015
from EMAN2db import db_open_dict
# Set up global variables related to bdb cache
if global_def.CACHE_DISABLE:
from utilities import disable_bdb_cache
disable_bdb_cache()
# Set up global variables related to ERROR function
global_def.BATCH = True
# detect if program is running under MPI
RUNNING_UNDER_MPI = "OMPI_COMM_WORLD_SIZE" in os.environ
if RUNNING_UNDER_MPI: global_def.MPI = True
if options.output_dir =="./": current_output_dir = os.path.abspath(options.output_dir)
else: current_output_dir = options.output_dir
if options.symmetrize :
if RUNNING_UNDER_MPI:
try:
sys.argv = mpi_init(len(sys.argv), sys.argv)
try:
number_of_proc = mpi_comm_size(MPI_COMM_WORLD)
if( number_of_proc > 1 ):
ERROR("Cannot use more than one CPU for symmetry preparation","sx3dvariability",1)
except:
pass
except:
pass
if not os.path.exists(current_output_dir): os.mkdir(current_output_dir)
# Input
#instack = "Clean_NORM_CTF_start_wparams.hdf"
#instack = "bdb:data"
from logger import Logger,BaseLogger_Files
if os.path.exists(os.path.join(current_output_dir, "log.txt")): os.remove(os.path.join(current_output_dir, "log.txt"))
log_main=Logger(BaseLogger_Files())
log_main.prefix = os.path.join(current_output_dir, "./")
instack = args[0]
sym = options.sym.lower()
if( sym == "c1" ):
ERROR("There is no need to symmetrize stack for C1 symmetry","sx3dvariability",1)
line =""
for a in sys.argv:
line +=" "+a
log_main.add(line)
if(instack[:4] !="bdb:"):
#if output_dir =="./": stack = "bdb:data"
stack = "bdb:"+current_output_dir+"/data"
delete_bdb(stack)
junk = cmdexecute("sxcpy.py "+instack+" "+stack)
else: stack = instack
qt = EMUtil.get_all_attributes(stack,'xform.projection')
na = len(qt)
ts = get_symt(sym)
ks = len(ts)
angsa = [None]*na
for k in range(ks):
#Qfile = "Q%1d"%k
#if options.output_dir!="./": Qfile = os.path.join(options.output_dir,"Q%1d"%k)
Qfile = os.path.join(current_output_dir, "Q%1d"%k)
#delete_bdb("bdb:Q%1d"%k)
delete_bdb("bdb:"+Qfile)
#junk = cmdexecute("e2bdb.py "+stack+" --makevstack=bdb:Q%1d"%k)
junk = cmdexecute("e2bdb.py "+stack+" --makevstack=bdb:"+Qfile)
#DB = db_open_dict("bdb:Q%1d"%k)
DB = db_open_dict("bdb:"+Qfile)
for i in range(na):
ut = qt[i]*ts[k]
DB.set_attr(i, "xform.projection", ut)
#bt = ut.get_params("spider")
#angsa[i] = [round(bt["phi"],3)%360.0, round(bt["theta"],3)%360.0, bt["psi"], -bt["tx"], -bt["ty"]]
#write_text_row(angsa, 'ptsma%1d.txt'%k)
#junk = cmdexecute("e2bdb.py "+stack+" --makevstack=bdb:Q%1d"%k)
#junk = cmdexecute("sxheader.py bdb:Q%1d --params=xform.projection --import=ptsma%1d.txt"%(k,k))
DB.close()
#if options.output_dir =="./": delete_bdb("bdb:sdata")
delete_bdb("bdb:" + current_output_dir + "/"+"sdata")
#junk = cmdexecute("e2bdb.py . --makevstack=bdb:sdata --filt=Q")
sdata = "bdb:"+current_output_dir+"/"+"sdata"
print(sdata)
junk = cmdexecute("e2bdb.py " + current_output_dir +" --makevstack="+sdata +" --filt=Q")
#junk = cmdexecute("ls EMAN2DB/sdata*")
#a = get_im("bdb:sdata")
a = get_im(sdata)
a.set_attr("variabilitysymmetry",sym)
#a.write_image("bdb:sdata")
a.write_image(sdata)
else:
from fundamentals import window2d
sys.argv = mpi_init(len(sys.argv), sys.argv)
myid = mpi_comm_rank(MPI_COMM_WORLD)
number_of_proc = mpi_comm_size(MPI_COMM_WORLD)
main_node = 0
shared_comm = mpi_comm_split_type(MPI_COMM_WORLD, MPI_COMM_TYPE_SHARED, 0, MPI_INFO_NULL)
myid_on_node = mpi_comm_rank(shared_comm)
no_of_processes_per_group = mpi_comm_size(shared_comm)
masters_from_groups_vs_everything_else_comm = mpi_comm_split(MPI_COMM_WORLD, main_node == myid_on_node, myid_on_node)
color, no_of_groups, balanced_processor_load_on_nodes = get_colors_and_subsets(main_node, MPI_COMM_WORLD, myid, \
shared_comm, myid_on_node, masters_from_groups_vs_everything_else_comm)
overhead_loading = options.overhead*number_of_proc
#memory_per_node = options.memory_per_node
#if memory_per_node == -1.: memory_per_node = 2.*no_of_processes_per_group
keepgoing = 1
current_window = options.window
current_decimate = options.decimate
if len(args) == 1: stack = args[0]
else:
print(( "usage: " + usage))
print(( "Please run '" + progname + " -h' for detailed options"))
return 1
t0 = time()
# obsolete flags
options.MPI = True
#options.nvec = 0
options.radiuspca = -1
options.iter = 40
options.abs = 0.0
options.squ = 0.0
if options.fl > 0.0 and options.aa == 0.0:
ERROR("Fall off has to be given for the low-pass filter", "sx3dvariability", 1, myid)
#if options.VAR and options.SND:
# ERROR("Only one of var and SND can be set!", "sx3dvariability", myid)
if options.VAR and (options.ave2D or options.ave3D or options.var2D):
ERROR("When VAR is set, the program cannot output ave2D, ave3D or var2D", "sx3dvariability", 1, myid)
#if options.SND and (options.ave2D or options.ave3D):
# ERROR("When SND is set, the program cannot output ave2D or ave3D", "sx3dvariability", 1, myid)
#if options.nvec > 0 :
# ERROR("PCA option not implemented", "sx3dvariability", 1, myid)
#if options.nvec > 0 and options.ave3D == None:
# ERROR("When doing PCA analysis, one must set ave3D", "sx3dvariability", 1, myid)
if current_decimate>1.0 or current_decimate<0.0:
ERROR("Decimate rate should be a value between 0.0 and 1.0", "sx3dvariability", 1, myid)
if current_window < 0.0:
ERROR("Target window size should be always larger than zero", "sx3dvariability", 1, myid)
if myid == main_node:
img = get_image(stack, 0)
nx = img.get_xsize()
ny = img.get_ysize()
if(min(nx, ny) < current_window): keepgoing = 0
keepgoing = bcast_number_to_all(keepgoing, main_node, MPI_COMM_WORLD)
if keepgoing == 0: ERROR("The target window size cannot be larger than the size of decimated image", "sx3dvariability", 1, myid)
import string
options.sym = options.sym.lower()
# if global_def.CACHE_DISABLE:
# from utilities import disable_bdb_cache
# disable_bdb_cache()
# global_def.BATCH = True
if myid == main_node:
if not os.path.exists(current_output_dir): os.mkdir(current_output_dir)# Never delete output_dir in the program!
img_per_grp = options.img_per_grp
#nvec = options.nvec
radiuspca = options.radiuspca
from logger import Logger,BaseLogger_Files
#if os.path.exists(os.path.join(options.output_dir, "log.txt")): os.remove(os.path.join(options.output_dir, "log.txt"))
log_main=Logger(BaseLogger_Files())
log_main.prefix = os.path.join(current_output_dir, "./")
if myid == main_node:
line = ""
for a in sys.argv: line +=" "+a
log_main.add(line)
log_main.add("-------->>>Settings given by all options<<<-------")
log_main.add("Symmetry : %s"%options.sym)
log_main.add("Input stack : %s"%stack)
log_main.add("Output_dir : %s"%current_output_dir)
if options.ave3D: log_main.add("Ave3d : %s"%options.ave3D)
if options.var3D: log_main.add("Var3d : %s"%options.var3D)
if options.ave2D: log_main.add("Ave2D : %s"%options.ave2D)
if options.var2D: log_main.add("Var2D : %s"%options.var2D)
if options.VAR: log_main.add("VAR : True")
else: log_main.add("VAR : False")
if options.CTF: log_main.add("CTF correction : True ")
else: log_main.add("CTF correction : False ")
log_main.add("Image per group : %5d"%options.img_per_grp)
log_main.add("Image decimate rate : %4.3f"%current_decimate)
log_main.add("Low pass filter : %4.3f"%options.fl)
current_fl = options.fl
if current_fl == 0.0: current_fl = 0.5
log_main.add("Current low pass filter is equivalent to cutoff frequency %4.3f for original image size"%round((current_fl*current_decimate),3))
log_main.add("Window size : %5d "%current_window)
log_main.add("sx3dvariability begins")
symbaselen = 0
if myid == main_node:
nima = EMUtil.get_image_count(stack)
img = get_image(stack)
nx = img.get_xsize()
ny = img.get_ysize()
nnxo = nx
nnyo = ny
if options.sym != "c1" :
imgdata = get_im(stack)
try:
i = imgdata.get_attr("variabilitysymmetry").lower()
if(i != options.sym):
ERROR("The symmetry provided does not agree with the symmetry of the input stack", "sx3dvariability", 1, myid)
except:
ERROR("Input stack is not prepared for symmetry, please follow instructions", "sx3dvariability", 1, myid)
from utilities import get_symt
i = len(get_symt(options.sym))
if((nima/i)*i != nima):
ERROR("The length of the input stack is incorrect for symmetry processing", "sx3dvariability", 1, myid)
symbaselen = nima/i
else: symbaselen = nima
else:
nima = 0
nx = 0
ny = 0
nnxo = 0
nnyo = 0
nima = bcast_number_to_all(nima)
nx = bcast_number_to_all(nx)
ny = bcast_number_to_all(ny)
nnxo = bcast_number_to_all(nnxo)
nnyo = bcast_number_to_all(nnyo)
if current_window > max(nx, ny):
ERROR("Window size is larger than the original image size", "sx3dvariability", 1)
if current_decimate == 1.:
if current_window !=0:
nx = current_window
ny = current_window
else:
if current_window == 0:
nx = int(nx*current_decimate+0.5)
ny = int(ny*current_decimate+0.5)
else:
nx = int(current_window*current_decimate+0.5)
ny = nx
symbaselen = bcast_number_to_all(symbaselen)
# check FFT prime number
from fundamentals import smallprime
is_fft_friendly = (nx == smallprime(nx))
if not is_fft_friendly:
if myid == main_node:
log_main.add("The target image size is not a product of small prime numbers")
log_main.add("Program adjusts the input settings!")
### two cases
if current_decimate == 1.:
nx = smallprime(nx)
ny = nx
current_window = nx # update
if myid == main_node:
log_main.add("The window size is updated to %d."%current_window)
else:
if current_window == 0:
nx = smallprime(int(nx*current_decimate+0.5))
current_decimate = float(nx)/nnxo
ny = nx
if (myid == main_node):
log_main.add("The decimate rate is updated to %f."%current_decimate)
else:
nx = smallprime(int(current_window*current_decimate+0.5))
ny = nx
current_window = int(nx/current_decimate+0.5)
if (myid == main_node):
log_main.add("The window size is updated to %d."%current_window)
if myid == main_node:
log_main.add("The target image size is %d"%nx)
if radiuspca == -1: radiuspca = nx/2-2
if myid == main_node: log_main.add("%-70s: %d\n"%("Number of projection", nima))
img_begin, img_end = MPI_start_end(nima, number_of_proc, myid)
"""
if options.SND:
from projection import prep_vol, prgs
from statistics import im_diff
from utilities import get_im, model_circle, get_params_proj, set_params_proj
from utilities import get_ctf, generate_ctf
from filter import filt_ctf
imgdata = EMData.read_images(stack, range(img_begin, img_end))
if options.CTF:
vol = recons3d_4nn_ctf_MPI(myid, imgdata, 1.0, symmetry=options.sym, npad=options.npad, xysize=-1, zsize=-1)
else:
vol = recons3d_4nn_MPI(myid, imgdata, symmetry=options.sym, npad=options.npad, xysize=-1, zsize=-1)
bcast_EMData_to_all(vol, myid)
volft, kb = prep_vol(vol)
mask = model_circle(nx/2-2, nx, ny)
varList = []
for i in xrange(img_begin, img_end):
phi, theta, psi, s2x, s2y = get_params_proj(imgdata[i-img_begin])
ref_prj = prgs(volft, kb, [phi, theta, psi, -s2x, -s2y])
if options.CTF:
ctf_params = get_ctf(imgdata[i-img_begin])
ref_prj = filt_ctf(ref_prj, generate_ctf(ctf_params))
diff, A, B = im_diff(ref_prj, imgdata[i-img_begin], mask)
diff2 = diff*diff
set_params_proj(diff2, [phi, theta, psi, s2x, s2y])
varList.append(diff2)
mpi_barrier(MPI_COMM_WORLD)
"""
if options.VAR: # 2D variance images have no shifts
#varList = EMData.read_images(stack, range(img_begin, img_end))
from EMAN2 import Region
for index_of_particle in range(img_begin,img_end):
image = get_im(stack, index_of_proj)
if current_window > 0: varList.append(fdecimate(window2d(image,current_window,current_window), nx,ny))
else: varList.append(fdecimate(image, nx,ny))
else:
from utilities import bcast_number_to_all, bcast_list_to_all, send_EMData, recv_EMData
from utilities import set_params_proj, get_params_proj, params_3D_2D, get_params2D, set_params2D, compose_transform2
from utilities import model_blank, nearest_proj, model_circle, write_text_row, wrap_mpi_gatherv
from applications import pca
from statistics import avgvar, avgvar_ctf, ccc
from filter import filt_tanl
from morphology import threshold, square_root
from projection import project, prep_vol, prgs
from sets import Set
from utilities import wrap_mpi_recv, wrap_mpi_bcast, wrap_mpi_send
import numpy as np
if myid == main_node:
t1 = time()
proj_angles = []
aveList = []
tab = EMUtil.get_all_attributes(stack, 'xform.projection')
for i in range(nima):
t = tab[i].get_params('spider')
phi = t['phi']
theta = t['theta']
psi = t['psi']
x = theta
if x > 90.0: x = 180.0 - x
x = x*10000+psi
proj_angles.append([x, t['phi'], t['theta'], t['psi'], i])
t2 = time()
log_main.add( "%-70s: %d\n"%("Number of neighboring projections", img_per_grp))
log_main.add("...... Finding neighboring projections\n")
log_main.add( "Number of images per group: %d"%img_per_grp)
log_main.add( "Now grouping projections")
proj_angles.sort()
proj_angles_list = np.full((nima, 4), 0.0, dtype=np.float32)
for i in range(nima):
proj_angles_list[i][0] = proj_angles[i][1]
proj_angles_list[i][1] = proj_angles[i][2]
proj_angles_list[i][2] = proj_angles[i][3]
proj_angles_list[i][3] = proj_angles[i][4]
else: proj_angles_list = 0
proj_angles_list = wrap_mpi_bcast(proj_angles_list, main_node, MPI_COMM_WORLD)
proj_angles = []
for i in range(nima):
proj_angles.append([proj_angles_list[i][0], proj_angles_list[i][1], proj_angles_list[i][2], int(proj_angles_list[i][3])])
del proj_angles_list
proj_list, mirror_list = nearest_proj(proj_angles, img_per_grp, range(img_begin, img_end))
all_proj = Set()
for im in proj_list:
for jm in im:
all_proj.add(proj_angles[jm][3])
all_proj = list(all_proj)
index = {}
for i in range(len(all_proj)): index[all_proj[i]] = i
mpi_barrier(MPI_COMM_WORLD)
if myid == main_node:
log_main.add("%-70s: %.2f\n"%("Finding neighboring projections lasted [s]", time()-t2))
log_main.add("%-70s: %d\n"%("Number of groups processed on the main node", len(proj_list)))
log_main.add("Grouping projections took: %12.1f [m]"%((time()-t2)/60.))
log_main.add("Number of groups on main node: ", len(proj_list))
mpi_barrier(MPI_COMM_WORLD)
if myid == main_node:
log_main.add("...... Calculating the stack of 2D variances \n")
# Memory estimation. There are two memory consumption peaks
# peak 1. Compute ave, var;
# peak 2. Var volume reconstruction;
# proj_params = [0.0]*(nima*5)
aveList = []
varList = []
#if nvec > 0: eigList = [[] for i in range(nvec)]
dnumber = len(all_proj)# all neighborhood set for assigned to myid
pnumber = len(proj_list)*2. + img_per_grp # aveList and varList
tnumber = dnumber+pnumber
vol_size2 = nx**3*4.*8/1.e9
vol_size1 = 2.*nnxo**3*4.*8/1.e9
proj_size = nnxo*nnyo*len(proj_list)*4.*2./1.e9 # both aveList and varList
orig_data_size = nnxo*nnyo*4.*tnumber/1.e9
reduced_data_size = nx*nx*4.*tnumber/1.e9
full_data = np.full((number_of_proc, 2), -1., dtype=np.float16)
full_data[myid] = orig_data_size, reduced_data_size
if myid != main_node: wrap_mpi_send(full_data, main_node, MPI_COMM_WORLD)
if myid == main_node:
for iproc in range(number_of_proc):
if iproc != main_node:
dummy = wrap_mpi_recv(iproc, MPI_COMM_WORLD)
full_data[np.where(dummy>-1)] = dummy[np.where(dummy>-1)]
del dummy
mpi_barrier(MPI_COMM_WORLD)
full_data = wrap_mpi_bcast(full_data, main_node, MPI_COMM_WORLD)
# find the CPU with heaviest load
minindx = np.argsort(full_data, 0)
heavy_load_myid = minindx[-1][1]
total_mem = sum(full_data)
if myid == main_node:
if current_window == 0:
log_main.add("Nx: current image size = %d. Decimated by %f from %d"%(nx, current_decimate, nnxo))
else:
log_main.add("Nx: current image size = %d. Windowed to %d, and decimated by %f from %d"%(nx, current_window, current_decimate, nnxo))
log_main.add("Nproj: number of particle images.")
log_main.add("Navg: number of 2D average images.")
log_main.add("Nvar: number of 2D variance images.")
log_main.add("Img_per_grp: user defined image per group for averaging = %d"%img_per_grp)
log_main.add("Overhead: total python overhead memory consumption = %f"%overhead_loading)
log_main.add("Total memory) = 4.0*nx^2*(nproj + navg +nvar+ img_per_grp)/1.0e9 + overhead: %12.3f [GB]"%\
(total_mem[1] + overhead_loading))
del full_data
mpi_barrier(MPI_COMM_WORLD)
if myid == heavy_load_myid:
log_main.add("Begin reading and preprocessing images on processor. Wait... ")
ttt = time()
#imgdata = EMData.read_images(stack, all_proj)
imgdata = [ None for im in range(len(all_proj))]
for index_of_proj in range(len(all_proj)):
#image = get_im(stack, all_proj[index_of_proj])
if( current_window > 0): imgdata[index_of_proj] = fdecimate(window2d(get_im(stack, all_proj[index_of_proj]),current_window,current_window), nx, ny)
else: imgdata[index_of_proj] = fdecimate(get_im(stack, all_proj[index_of_proj]), nx, ny)
if (current_decimate> 0.0 and options.CTF):
ctf = imgdata[index_of_proj].get_attr("ctf")
ctf.apix = ctf.apix/current_decimate
imgdata[index_of_proj].set_attr("ctf", ctf)
if myid == heavy_load_myid and index_of_proj%100 == 0:
log_main.add(" ...... %6.2f%% "%(index_of_proj/float(len(all_proj))*100.))
mpi_barrier(MPI_COMM_WORLD)
if myid == heavy_load_myid:
log_main.add("All_proj preprocessing cost %7.2f m"%((time()-ttt)/60.))
log_main.add("Wait untill reading on all CPUs done...")
'''
imgdata2 = EMData.read_images(stack, range(img_begin, img_end))
if options.fl > 0.0:
for k in xrange(len(imgdata2)):
imgdata2[k] = filt_tanl(imgdata2[k], options.fl, options.aa)
if options.CTF:
vol = recons3d_4nn_ctf_MPI(myid, imgdata2, 1.0, symmetry=options.sym, npad=options.npad, xysize=-1, zsize=-1)
else:
vol = recons3d_4nn_MPI(myid, imgdata2, symmetry=options.sym, npad=options.npad, xysize=-1, zsize=-1)
if myid == main_node:
vol.write_image("vol_ctf.hdf")
print_msg("Writing to the disk volume reconstructed from averages as : %s\n"%("vol_ctf.hdf"))
del vol, imgdata2
mpi_barrier(MPI_COMM_WORLD)
'''
from applications import prepare_2d_forPCA
from utilities import model_blank
from EMAN2 import Transform
if not options.no_norm:
mask = model_circle(nx/2-2, nx, nx)
if options.CTF:
from utilities import pad
from filter import filt_ctf
from filter import filt_tanl
if myid == heavy_load_myid:
log_main.add("Start computing 2D aveList and varList. Wait...")
ttt = time()
inner=nx//2-4
outer=inner+2
xform_proj_for_2D = [ None for i in range(len(proj_list))]
for i in range(len(proj_list)):
ki = proj_angles[proj_list[i][0]][3]
if ki >= symbaselen: continue
mi = index[ki]
dpar = Util.get_transform_params(imgdata[mi], "xform.projection", "spider")
phiM, thetaM, psiM, s2xM, s2yM = dpar["phi"],dpar["theta"],dpar["psi"],-dpar["tx"]*current_decimate,-dpar["ty"]*current_decimate
grp_imgdata = []
for j in range(img_per_grp):
mj = index[proj_angles[proj_list[i][j]][3]]
cpar = Util.get_transform_params(imgdata[mj], "xform.projection", "spider")
alpha, sx, sy, mirror = params_3D_2D_NEW(cpar["phi"], cpar["theta"],cpar["psi"], -cpar["tx"]*current_decimate, -cpar["ty"]*current_decimate, mirror_list[i][j])
if thetaM <= 90:
if mirror == 0: alpha, sx, sy, scale = compose_transform2(alpha, sx, sy, 1.0, phiM - cpar["phi"], 0.0, 0.0, 1.0)
else: alpha, sx, sy, scale = compose_transform2(alpha, sx, sy, 1.0, 180-(phiM - cpar["phi"]), 0.0, 0.0, 1.0)
else:
if mirror == 0: alpha, sx, sy, scale = compose_transform2(alpha, sx, sy, 1.0, -(phiM- cpar["phi"]), 0.0, 0.0, 1.0)
else: alpha, sx, sy, scale = compose_transform2(alpha, sx, sy, 1.0, -(180-(phiM - cpar["phi"])), 0.0, 0.0, 1.0)
imgdata[mj].set_attr("xform.align2d", Transform({"type":"2D","alpha":alpha,"tx":sx,"ty":sy,"mirror":mirror,"scale":1.0}))
grp_imgdata.append(imgdata[mj])
if not options.no_norm:
for k in range(img_per_grp):
ave, std, minn, maxx = Util.infomask(grp_imgdata[k], mask, False)
grp_imgdata[k] -= ave
grp_imgdata[k] /= std
if options.fl > 0.0:
for k in range(img_per_grp):
grp_imgdata[k] = filt_tanl(grp_imgdata[k], options.fl, options.aa)
# Because of background issues, only linear option works.
if options.CTF: ave, var = aves_wiener(grp_imgdata, SNR = 1.0e5, interpolation_method = "linear")
else: ave, var = ave_var(grp_imgdata)
# Switch to std dev
# threshold is not really needed,it is just in case due to numerical accuracy something turns out negative.
var = square_root(threshold(var))
set_params_proj(ave, [phiM, thetaM, 0.0, 0.0, 0.0])
set_params_proj(var, [phiM, thetaM, 0.0, 0.0, 0.0])
aveList.append(ave)
varList.append(var)
xform_proj_for_2D[i] = [phiM, thetaM, 0.0, 0.0, 0.0]
'''
if nvec > 0:
eig = pca(input_stacks=grp_imgdata, subavg="", mask_radius=radiuspca, nvec=nvec, incore=True, shuffle=False, genbuf=True)
for k in range(nvec):
set_params_proj(eig[k], [phiM, thetaM, 0.0, 0.0, 0.0])
eigList[k].append(eig[k])
"""
if myid == 0 and i == 0:
for k in xrange(nvec):
eig[k].write_image("eig.hdf", k)
"""
'''
if (myid == heavy_load_myid) and (i%100 == 0):
log_main.add(" ......%6.2f%% "%(i/float(len(proj_list))*100.))
del imgdata, grp_imgdata, cpar, dpar, all_proj, proj_angles, index
if not options.no_norm: del mask
if myid == main_node: del tab
# At this point, all averages and variances are computed
mpi_barrier(MPI_COMM_WORLD)
if (myid == heavy_load_myid):
log_main.add("Computing aveList and varList took %12.1f [m]"%((time()-ttt)/60.))
xform_proj_for_2D = wrap_mpi_gatherv(xform_proj_for_2D, main_node, MPI_COMM_WORLD)
if (myid == main_node):
write_text_row(xform_proj_for_2D, os.path.join(current_output_dir, "params.txt"))
del xform_proj_for_2D
mpi_barrier(MPI_COMM_WORLD)
if options.ave2D:
from fundamentals import fpol
from applications import header
if myid == main_node:
log_main.add("Compute ave2D ... ")
km = 0
for i in range(number_of_proc):
if i == main_node :
for im in range(len(aveList)):
aveList[im].write_image(os.path.join(current_output_dir, options.ave2D), km)
km += 1
else:
nl = mpi_recv(1, MPI_INT, i, SPARX_MPI_TAG_UNIVERSAL, MPI_COMM_WORLD)
nl = int(nl[0])
for im in range(nl):
ave = recv_EMData(i, im+i+70000)
"""
nm = mpi_recv(1, MPI_INT, i, SPARX_MPI_TAG_UNIVERSAL, MPI_COMM_WORLD)
nm = int(nm[0])
members = mpi_recv(nm, MPI_INT, i, SPARX_MPI_TAG_UNIVERSAL, MPI_COMM_WORLD)
ave.set_attr('members', map(int, members))
members = mpi_recv(nm, MPI_FLOAT, i, SPARX_MPI_TAG_UNIVERSAL, MPI_COMM_WORLD)
ave.set_attr('pix_err', map(float, members))
members = mpi_recv(3, MPI_FLOAT, i, SPARX_MPI_TAG_UNIVERSAL, MPI_COMM_WORLD)
ave.set_attr('refprojdir', map(float, members))
"""
tmpvol=fpol(ave, nx, nx,1)
tmpvol.write_image(os.path.join(current_output_dir, options.ave2D), km)
km += 1
else:
mpi_send(len(aveList), 1, MPI_INT, main_node, SPARX_MPI_TAG_UNIVERSAL, MPI_COMM_WORLD)
for im in range(len(aveList)):
send_EMData(aveList[im], main_node,im+myid+70000)
"""
members = aveList[im].get_attr('members')
mpi_send(len(members), 1, MPI_INT, main_node, SPARX_MPI_TAG_UNIVERSAL, MPI_COMM_WORLD)
mpi_send(members, len(members), MPI_INT, main_node, SPARX_MPI_TAG_UNIVERSAL, MPI_COMM_WORLD)
members = aveList[im].get_attr('pix_err')
mpi_send(members, len(members), MPI_FLOAT, main_node, SPARX_MPI_TAG_UNIVERSAL, MPI_COMM_WORLD)
try:
members = aveList[im].get_attr('refprojdir')
mpi_send(members, 3, MPI_FLOAT, main_node, SPARX_MPI_TAG_UNIVERSAL, MPI_COMM_WORLD)
except:
mpi_send([-999.0,-999.0,-999.0], 3, MPI_FLOAT, main_node, SPARX_MPI_TAG_UNIVERSAL, MPI_COMM_WORLD)
"""
if myid == main_node:
header(os.path.join(current_output_dir, options.ave2D), params='xform.projection', fimport = os.path.join(current_output_dir, "params.txt"))
mpi_barrier(MPI_COMM_WORLD)
if options.ave3D:
from fundamentals import fpol
t5 = time()
if myid == main_node: log_main.add("Reconstruct ave3D ... ")
ave3D = recons3d_4nn_MPI(myid, aveList, symmetry=options.sym, npad=options.npad)
bcast_EMData_to_all(ave3D, myid)
if myid == main_node:
if current_decimate != 1.0: ave3D = resample(ave3D, 1./current_decimate)
ave3D = fpol(ave3D, nnxo, nnxo, nnxo) # always to the orignal image size
set_pixel_size(ave3D, 1.0)
ave3D.write_image(os.path.join(current_output_dir, options.ave3D))
log_main.add("Ave3D reconstruction took %12.1f [m]"%((time()-t5)/60.0))
log_main.add("%-70s: %s\n"%("The reconstructed ave3D is saved as ", options.ave3D))
mpi_barrier(MPI_COMM_WORLD)
del ave, var, proj_list, stack, alpha, sx, sy, mirror, aveList
'''
if nvec > 0:
for k in range(nvec):
if myid == main_node:log_main.add("Reconstruction eigenvolumes", k)
cont = True
ITER = 0
mask2d = model_circle(radiuspca, nx, nx)
while cont:
#print "On node %d, iteration %d"%(myid, ITER)
eig3D = recons3d_4nn_MPI(myid, eigList[k], symmetry=options.sym, npad=options.npad)
bcast_EMData_to_all(eig3D, myid, main_node)
if options.fl > 0.0:
eig3D = filt_tanl(eig3D, options.fl, options.aa)
if myid == main_node:
eig3D.write_image(os.path.join(options.outpout_dir, "eig3d_%03d.hdf"%(k, ITER)))
Util.mul_img( eig3D, model_circle(radiuspca, nx, nx, nx) )
eig3Df, kb = prep_vol(eig3D)
del eig3D
cont = False
icont = 0
for l in range(len(eigList[k])):
phi, theta, psi, s2x, s2y = get_params_proj(eigList[k][l])
proj = prgs(eig3Df, kb, [phi, theta, psi, s2x, s2y])
cl = ccc(proj, eigList[k][l], mask2d)
if cl < 0.0:
icont += 1
cont = True
eigList[k][l] *= -1.0
u = int(cont)
u = mpi_reduce([u], 1, MPI_INT, MPI_MAX, main_node, MPI_COMM_WORLD)
icont = mpi_reduce([icont], 1, MPI_INT, MPI_SUM, main_node, MPI_COMM_WORLD)
if myid == main_node:
u = int(u[0])
log_main.add(" Eigenvector: ",k," number changed ",int(icont[0]))
else: u = 0
u = bcast_number_to_all(u, main_node)
cont = bool(u)
ITER += 1
del eig3Df, kb
mpi_barrier(MPI_COMM_WORLD)
del eigList, mask2d
'''
if options.ave3D: del ave3D
if options.var2D:
from fundamentals import fpol
from applications import header
if myid == main_node:
log_main.add("Compute var2D...")
km = 0
for i in range(number_of_proc):
if i == main_node :
for im in range(len(varList)):
tmpvol=fpol(varList[im], nx, nx,1)
tmpvol.write_image(os.path.join(current_output_dir, options.var2D), km)
km += 1
else:
nl = mpi_recv(1, MPI_INT, i, SPARX_MPI_TAG_UNIVERSAL, MPI_COMM_WORLD)
nl = int(nl[0])
for im in range(nl):
ave = recv_EMData(i, im+i+70000)
tmpvol=fpol(ave, nx, nx,1)
tmpvol.write_image(os.path.join(current_output_dir, options.var2D), km)
km += 1
else:
mpi_send(len(varList), 1, MPI_INT, main_node, SPARX_MPI_TAG_UNIVERSAL, MPI_COMM_WORLD)
for im in range(len(varList)):
send_EMData(varList[im], main_node, im+myid+70000)# What with the attributes??
mpi_barrier(MPI_COMM_WORLD)
if myid == main_node:
from applications import header
header(os.path.join(current_output_dir, options.var2D), params = 'xform.projection',fimport = os.path.join(current_output_dir, "params.txt"))
mpi_barrier(MPI_COMM_WORLD)
if options.var3D:
if myid == main_node: log_main.add("Reconstruct var3D ...")
t6 = time()
# radiusvar = options.radius
# if( radiusvar < 0 ): radiusvar = nx//2 -3
res = recons3d_4nn_MPI(myid, varList, symmetry = options.sym, npad=options.npad)
#res = recons3d_em_MPI(varList, vol_stack, options.iter, radiusvar, options.abs, True, options.sym, options.squ)
if myid == main_node:
from fundamentals import fpol
if current_decimate != 1.0: res = resample(res, 1./current_decimate)
res = fpol(res, nnxo, nnxo, nnxo)
set_pixel_size(res, 1.0)
res.write_image(os.path.join(current_output_dir, options.var3D))
log_main.add("%-70s: %s\n"%("The reconstructed var3D is saved as ", options.var3D))
log_main.add("Var3D reconstruction took %f12.1 [m]"%((time()-t6)/60.0))
log_main.add("Total computation time %f12.1 [m]"%((time()-t0)/60.0))
log_main.add("sx3dvariability finishes")
from mpi import mpi_finalize
mpi_finalize()
if RUNNING_UNDER_MPI: global_def.MPI = False
global_def.BATCH = False