def setup_method(self, method):
axes_list = [{
'name': 'a',
'navigate': True,
'offset': 0.0,
'scale': 1.3,
'size': 2,
'units': 'aa'
}, {
'name': 'b',
'navigate': False,
'offset': 1.0,
'scale': 6.0,
'size': 3,
'units': 'bb'
}, {
'name': 'c',
'navigate': False,
'offset': 2.0,
'scale': 100.0,
'size': 4,
'units': 'cc'
}, {
'name': 'd',
'navigate': True,
'offset': 3.0,
'scale': 1000000.0,
'size': 5,
'units': 'dd'
}]
self.am = AxesManager(axes_list)
def test_convert_to_navigation_units_Undefined(self):
self.axes_list[0]['units'] = t.Undefined
am = AxesManager(self.axes_list)
am.convert_units(axes='navigation', same_units=True)
assert am['x'].units == t.Undefined
nt.assert_almost_equal(am['x'].scale, 1.5E-9)
assert am['y'].units == 'm'
nt.assert_almost_equal(am['y'].scale, 0.5E-9)
assert am['energy'].units == 'eV'
nt.assert_almost_equal(am['energy'].scale, 5)
def test_convert_to_navigation_units_Undefined(self):
self.axes_list[0]['units'] = t.Undefined
am = AxesManager(self.axes_list)
am.convert_units(axes='navigation', same_units=True)
assert am['x'].units == t.Undefined
nt.assert_almost_equal(am['x'].scale, 1.5E-9)
assert am['y'].units == 'm'
nt.assert_almost_equal(am['y'].scale, 0.5E-9)
assert am['energy'].units == 'eV'
nt.assert_almost_equal(am['energy'].scale, 5)
def setup_method(self, method):
self.axes_list = [{
'name': 'x',
'navigate': True,
'is_binned': False,
'offset': 0.0,
'scale': 1.5E-9,
'size': 1024,
'units': 'm'
}, {
'name': 'y',
'navigate': True,
'is_binned': False,
'offset': 0.0,
'scale': 0.5E-9,
'size': 1024,
'units': 'm'
}, {
'name': 'energy',
'navigate': False,
'is_binned': False,
'offset': 0.0,
'scale': 5.0,
'size': 4096,
'units': 'eV'
}]
self.am = AxesManager(self.axes_list)
self.axes_list2 = [{
'name': 'x',
'navigate': True,
'is_binned': False,
'offset': 0.0,
'scale': 1.5E-9,
'size': 1024,
'units': 'm'
}, {
'name': 'energy',
'navigate': False,
'is_binned': False,
'offset': 0.0,
'scale': 2.5,
'size': 4096,
'units': 'eV'
}, {
'name': 'energy2',
'navigate': False,
'is_binned': False,
'offset': 0.0,
'scale': 5.0,
'size': 4096,
'units': 'eV'
}]
self.am2 = AxesManager(self.axes_list2)
def do_ffts():
j = 0
for s in signals:
ffts = s.deepcopy()
if ffts.data.itemsize <= 4:
ffts.change_dtype(np.complex64)
else:
ffts.change_dtype(np.complex128)
am = AxesManager(s.axes_manager._get_axes_dicts())
for idx in am:
fftdata = s.data[am._getitem_tuple]
fftdata = scipy.fftpack.fftn(fftdata)
fftdata = scipy.fftpack.fftshift(fftdata)
ffts.data[am._getitem_tuple] = fftdata
j += 1
yield j
for i in range(ffts.axes_manager.signal_dimension):
axis = ffts.axes_manager.signal_axes[i]
s_axis = s.axes_manager.signal_axes[i]
axis.scale = 1 / (s_axis.size * s_axis.scale)
shift = (axis.high_value - axis.low_value) / 2
axis.offset -= shift
u = s_axis.units
if u.endswith('-1'):
u = u[:-2]
else:
u += '-1'
axis.units = u
indstr = ' ' + str(s.axes_manager.indices) \
if len(s.axes_manager.indices) > 0 else ''
ffts.metadata.General.title = 'FFT of ' + \
ffts.metadata.General.title + indstr
fftsignals.append(ffts)
def setup_method(self, method):
axes_list = [
{'name': 'a',
'navigate': True,
'offset': 0.0,
'scale': 1.3,
'size': 2,
'units': 'aa'},
{'name': 'b',
'navigate': False,
'offset': 1.0,
'scale': 6.0,
'size': 3,
'units': 'bb'},
{'name': 'c',
'navigate': False,
'offset': 2.0,
'scale': 100.0,
'size': 4,
'units': 'cc'},
{'name': 'd',
'navigate': True,
'offset': 3.0,
'scale': 1000000.0,
'size': 5,
'units': 'dd'}]
self.am = AxesManager(axes_list)
def append(self, *args):
if len(args) < 1:
pass
else:
smp = self.mapped_parameters
print args
for arg in args:
#object parameters
mp = arg.mapped_parameters
if mp.original_filename not in smp.original_files.keys():
smp.original_files[mp.original_filename] = arg
# add the data to the aggregate array
if self.data == None:
self.data = np.atleast_3d(arg.data)
else:
self.data = np.append(self.data,
np.atleast_3d(arg.data),
axis=2)
print "File %s added to aggregate." % mp.original_filename
else:
print "Data from file %s already in this aggregate. \n \
Delete it first if you want to update it." % mp.original_filename
# refresh the axes for the new sized data
self.axes_manager = AxesManager(self._get_undefined_axes_list())
smp.original_filename = "Aggregate Image: %s" % smp.original_files.keys(
)
self.summary()
def append(self, *args):
if len(args) < 1:
pass
else:
smp = self.mapped_parameters
for arg in args:
#object parameters
mp = arg.mapped_parameters
pmp = mp.parent.mapped_parameters
if pmp.original_filename not in smp.locations.keys():
smp.locations[pmp.original_filename] = mp.locations
smp.original_files[pmp.original_filename] = mp.parent
smp.image_stacks[pmp.original_filename] = arg
smp.aggregate_address[pmp.original_filename] = (
smp.aggregate_end_pointer,
smp.aggregate_end_pointer + arg.data.shape[-1] - 1)
# add the data to the aggregate array
if self.data == None:
self.data = np.atleast_3d(arg.data)
else:
self.data = np.append(self.data, arg.data, axis=2)
print "File %s added to aggregate." % mp.original_filename
smp.aggregate_end_pointer = self.data.shape[2]
else:
print "Data from file %s already in this aggregate. \n \
Delete it first if you want to update it." % mp.original_filename
# refresh the axes for the new sized data
self.axes_manager = AxesManager(self._get_undefined_axes_list())
smp.original_filename = "Aggregate Cells: %s" % smp.locations.keys(
)
self.summary()
class TestAxesManager:
def setup_method(self, method):
axes_list = [
{
"name": "a",
"navigate": True,
"offset": 0.0,
"scale": 1.3,
"size": 2,
"units": "aa",
},
{
"name": "b",
"navigate": False,
"offset": 1.0,
"scale": 6.0,
"size": 3,
"units": "bb",
},
{
"name": "c",
"navigate": False,
"offset": 2.0,
"scale": 100.0,
"size": 4,
"units": "cc",
},
{
"name": "d",
"navigate": True,
"offset": 3.0,
"scale": 1000000.0,
"size": 5,
"units": "dd",
},
]
self.am = AxesManager(axes_list)
def test_reprs(self):
repr(self.am)
self.am._repr_html_
def test_update_from(self):
am = self.am
am2 = self.am.deepcopy()
m = mock.Mock()
am.events.any_axis_changed.connect(m.changed)
am.update_axes_attributes_from(am2._axes)
assert not m.changed.called
am2[0].scale = 0.5
am2[1].units = "km"
am2[2].offset = 50
am2[3].size = 1
am.update_axes_attributes_from(am2._axes, attributes=["units", "scale"])
assert m.changed.called
assert am2[0].scale == am[0].scale
assert am2[1].units == am[1].units
assert am2[2].offset != am[2].offset
assert am2[3].size != am[3].size
def _add_object(self, arg):
#object parameters
mp = arg.mapped_parameters
smp = self.mapped_parameters
if mp.original_filename not in smp.original_files.keys():
smp.original_files[mp.original_filename] = arg
# save the original data shape to the mva_results for later use
smp.original_files[
mp.
original_filename].mva_results.original_shape = arg.data.shape[:
-1]
arg.unfold()
smp.aggregate_address[mp.original_filename] = (
smp.aggregate_end_pointer,
smp.aggregate_end_pointer + arg.data.shape[0] - 1)
# add the data to the aggregate array
if self.data == None:
self.data = np.atleast_2d(arg.data)
# copy the axes for the sake of calibration
axes = [
arg.axes_manager.axes[i].get_axis_dictionary()
for i in xrange(len(arg.axes_manager.axes))
]
self.axes_manager = AxesManager(axes)
else:
self.data = np.append(self.data, arg.data, axis=0)
smp.aggregate_end_pointer = self.data.shape[0]
print "File %s added to aggregate." % mp.original_filename
else:
print "Data from file %s already in this aggregate. \n \
Delete it first if you want to update it." % mp.original_filename
def hdfgroup2dict(group, dictionary={}):
for key, value in group.attrs.iteritems():
if isinstance(value, (np.string_, str)):
if value == '_None_':
value = None
elif isinstance(value, np.bool_):
value = bool(value)
elif isinstance(value, np.ndarray) and \
value.dtype == np.dtype('|S1'):
value = value.tolist()
# skip signals - these are handled below.
if key.startswith('_sig_'):
pass
elif key.startswith('_datetime_'):
dictionary[key.replace("_datetime_", "")] = eval(value)
else:
dictionary[key] = value
if not isinstance(group, h5py.Dataset):
for key in group.keys():
if key.startswith('_sig_'):
from hyperspy.io import dict2signal
dictionary[key[len('_sig_'):]] = (dict2signal(
hdfgroup2signaldict(group[key])))
elif isinstance(group[key], h5py.Dataset):
dictionary[key] = np.array(group[key])
elif key.startswith('_hspy_AxesManager_'):
dictionary[key[len('_hspy_AxesManager_'):]] = \
AxesManager([i
for k, i in sorted(iter(
hdfgroup2dict(group[key]).iteritems()))])
else:
dictionary[key] = {}
hdfgroup2dict(group[key], dictionary[key])
return dictionary
def setup_method(self, method):
self.c = Component(["parameter"])
self.c._axes_manager = AxesManager([{
"size": 3,
"navigate": True
}, {
"size": 2,
"navigate": True
}])
class TestAxesManager:
def setup_method(self, method):
axes_list = [{
'name': 'a',
'navigate': True,
'offset': 0.0,
'scale': 1.3,
'size': 2,
'units': 'aa'
}, {
'name': 'b',
'navigate': False,
'offset': 1.0,
'scale': 6.0,
'size': 3,
'units': 'bb'
}, {
'name': 'c',
'navigate': False,
'offset': 2.0,
'scale': 100.0,
'size': 4,
'units': 'cc'
}, {
'name': 'd',
'navigate': True,
'offset': 3.0,
'scale': 1000000.0,
'size': 5,
'units': 'dd'
}]
self.am = AxesManager(axes_list)
def test_reprs(self):
repr(self.am)
self.am._repr_html_
def test_update_from(self):
am = self.am
am2 = self.am.deepcopy()
m = mock.Mock()
am.events.any_axis_changed.connect(m.changed)
am.update_axes_attributes_from(am2._axes)
assert not m.changed.called
am2[0].scale = 0.5
am2[1].units = "km"
am2[2].offset = 50
am2[3].size = 1
am.update_axes_attributes_from(am2._axes,
attributes=["units", "scale"])
assert m.changed.called
assert am2[0].scale == am[0].scale
assert am2[1].units == am[1].units
assert am2[2].offset != am[2].offset
assert am2[3].size != am[3].size
def setup_method(self, method):
self.axes_list = [
{'name': 'x',
'navigate': True,
'offset': 0.0,
'scale': 1.5E-9,
'size': 1024,
'units': 'm'},
{'name': 'y',
'navigate': True,
'offset': 0.0,
'scale': 0.5E-9,
'size': 1024,
'units': 'm'},
{'name': 'energy',
'navigate': False,
'offset': 0.0,
'scale': 5.0,
'size': 4096,
'units': 'eV'}]
self.am = AxesManager(self.axes_list)
self.axes_list2 = [
{'name': 'x',
'navigate': True,
'offset': 0.0,
'scale': 1.5E-9,
'size': 1024,
'units': 'm'},
{'name': 'energy',
'navigate': False,
'offset': 0.0,
'scale': 2.5,
'size': 4096,
'units': 'eV'},
{'name': 'energy2',
'navigate': False,
'offset': 0.0,
'scale': 5.0,
'size': 4096,
'units': 'eV'}]
self.am2 = AxesManager(self.axes_list2)
def remove(self, *keys):
smp = self.mapped_parameters
for key in keys:
idx = smp.original_files.keys().index(key)
self.data = np.delete(self.data, np.s_[idx:idx + 1:1], 2)
del smp.original_files[key]
print "File %s removed from aggregate." % key
self.axes_manager = AxesManager(self._get_undefined_axes_list())
smp.original_filename = "Aggregate Image: %s" % smp.original_files.keys(
)
self.summary()
def test_convert_to_navigation_units_different(self):
# Don't convert the units since the units of the navigation axes are
# different
self.axes_list.insert(0,
{'name': 'time',
'navigate': True,
'offset': 0.0,
'scale': 1.5,
'size': 20,
'units': 's'})
am = AxesManager(self.axes_list)
am.convert_units(axes='navigation', same_units=True)
assert am['time'].units == 's'
nt.assert_almost_equal(am['time'].scale, 1.5)
assert am['x'].units == 'nm'
nt.assert_almost_equal(am['x'].scale, 1.5)
assert am['y'].units == 'nm'
nt.assert_almost_equal(am['y'].scale, 0.5)
assert am['energy'].units == 'eV'
nt.assert_almost_equal(am['energy'].scale, 5)
class TestAxesManager:
def setup_method(self, method):
axes_list = [
{'name': 'a',
'navigate': True,
'offset': 0.0,
'scale': 1.3,
'size': 2,
'units': 'aa'},
{'name': 'b',
'navigate': False,
'offset': 1.0,
'scale': 6.0,
'size': 3,
'units': 'bb'},
{'name': 'c',
'navigate': False,
'offset': 2.0,
'scale': 100.0,
'size': 4,
'units': 'cc'},
{'name': 'd',
'navigate': True,
'offset': 3.0,
'scale': 1000000.0,
'size': 5,
'units': 'dd'}]
self.am = AxesManager(axes_list)
def test_reprs(self):
repr(self.am)
self.am._repr_html_
def test_update_from(self):
am = self.am
am2 = self.am.deepcopy()
m = mock.Mock()
am.events.any_axis_changed.connect(m.changed)
am.update_axes_attributes_from(am2._axes)
assert not m.changed.called
am2[0].scale = 0.5
am2[1].units = "km"
am2[2].offset = 50
am2[3].size = 1
am.update_axes_attributes_from(am2._axes,
attributes=["units", "scale"])
assert m.changed.called
assert am2[0].scale == am[0].scale
assert am2[1].units == am[1].units
assert am2[2].offset != am[2].offset
assert am2[3].size != am[3].size
def __init__(self, *args, **kw):
# this axes_manager isn't really ideal for Aggregates.
self.axes_manager = AxesManager([{
'name': 'undefined',
'scale': 1.,
'offset': 0.,
'size': 1,
'units': 'undefined',
'index_in_array': 0,
}])
super(Aggregate, self).__init__(*args, **kw)
self.data = None
self.mapped_parameters.original_files = OrderedDict()
def test_convert_to_navigation_units_different(self):
# Don't convert the units since the units of the navigation axes are
# different
self.axes_list.insert(
0, {
'name': 'time',
'navigate': True,
'offset': 0.0,
'scale': 1.5,
'size': 20,
'units': 's'
})
am = AxesManager(self.axes_list)
am.convert_units(axes='navigation', same_units=True)
assert am['time'].units == 's'
nt.assert_almost_equal(am['time'].scale, 1.5)
assert am['x'].units == 'nm'
nt.assert_almost_equal(am['x'].scale, 1.5)
assert am['y'].units == 'nm'
nt.assert_almost_equal(am['y'].scale, 0.5)
assert am['energy'].units == 'eV'
nt.assert_almost_equal(am['energy'].scale, 5)
def remove(self, *keys):
smp = self.mapped_parameters
for key in keys:
del smp.locations[key]
del smp.original_files[key]
del smp.image_stacks[key]
address = smp.aggregate_address[key]
self.data = np.delete(self.data, np.s_[address[0]:address[1]:1], 2)
print "File %s removed from aggregate." % key
self.axes_manager = AxesManager(self._get_undefined_axes_list())
smp.aggregate_end_pointer = self.data.shape[2]
smp.original_filename = "Aggregate Cells: %s" % smp.locations.keys()
self.summary()
def setup_method(self, method):
axes_list = [
{
"name": "a",
"navigate": True,
"offset": 0.0,
"scale": 1.3,
"size": 2,
"units": "aa",
},
{
"name": "b",
"navigate": False,
"offset": 1.0,
"scale": 6.0,
"size": 3,
"units": "bb",
},
{
"name": "c",
"navigate": False,
"offset": 2.0,
"scale": 100.0,
"size": 4,
"units": "cc",
},
{
"name": "d",
"navigate": True,
"offset": 3.0,
"scale": 1000000.0,
"size": 5,
"units": "dd",
},
]
self.am = AxesManager(axes_list)
class TestAxesManager:
def setup(self):
axes_list = [
{'name': 'a',
'navigate': True,
'offset': 0.0,
'scale': 1.3,
'size': 2,
'units': 'aa'},
{'name': 'b',
'navigate': False,
'offset': 1.0,
'scale': 6.0,
'size': 3,
'units': 'bb'},
{'name': 'c',
'navigate': False,
'offset': 2.0,
'scale': 100.0,
'size': 4,
'units': 'cc'},
{'name': 'd',
'navigate': True,
'offset': 3.0,
'scale': 1000000.0,
'size': 5,
'units': 'dd'}]
self.am = AxesManager(axes_list)
def test_update_from(self):
am = self.am
am2 = self.am.deepcopy()
m = mock.Mock()
am.events.any_axis_changed.connect(m.changed)
am.update_axes_attributes_from(am2._axes)
nt.assert_false(m.changed.called)
am2[0].scale = 0.5
am2[1].units = "km"
am2[2].offset = 50
am2[3].size = 1
am.update_axes_attributes_from(am2._axes,
attributes=["units", "scale"])
nt.assert_true(m.changed.called)
nt.assert_equal(am2[0].scale, am[0].scale)
nt.assert_equal(am2[1].units, am[1].units)
nt.assert_not_equal(am2[2].offset, am[2].offset)
nt.assert_not_equal(am2[3].size, am[3].size)
def load_dictionary(self, file_data_dict):
"""Parameters:
-----------
file_data_dict : dictionary
A dictionary containing at least a 'data' keyword with an array of
arbitrary dimensions. Additionally the dictionary can contain the
following keys:
axes: a dictionary that defines the axes (see the
AxesManager class)
attributes: a dictionary which keywords are stored as
attributes of the signal class
mapped_parameters: a dictionary containing a set of parameters
that will be stored as attributes of a Parameters class.
For some subclasses some particular parameters might be
mandatory.
original_parameters: a dictionary that will be accesible in the
original_parameters attribute of the signal class and that
typically contains all the parameters that has been
imported from the original data file.
"""
self.data = file_data_dict['data']
if 'axes' not in file_data_dict:
file_data_dict['axes'] = self._get_undefined_axes_list()
self.axes_manager = AxesManager(file_data_dict['axes'])
if not 'mapped_parameters' in file_data_dict:
file_data_dict['mapped_parameters'] = {}
if not 'original_parameters' in file_data_dict:
file_data_dict['original_parameters'] = {}
if 'attributes' in file_data_dict:
for key, value in file_data_dict['attributes'].iteritems():
self.__setattr__(key, value)
self.original_parameters.load_dictionary(
file_data_dict['original_parameters'])
self.mapped_parameters.load_dictionary(
file_data_dict['mapped_parameters'])
def __init__(self, signal):
if signal.axes_manager.signal_dimension != 1:
raise SignalDimensionError(
signal.axes_manager.signal_dimension, 1)
self.signal = signal
self.signal.plot()
axis_dict = signal.axes_manager.signal_axes[0].get_axis_dictionary()
am = AxesManager([axis_dict, ])
am._axes[0].navigate = True
# Set the position of the line in the middle of the spectral
# range by default
am._axes[0].index = int(round(am._axes[0].size / 2))
self.axes_manager = am
self.axes_manager.connect(self.update_position)
self.on_trait_change(self.switch_on_off, 'on')
def hdfgroup2dict(group, dictionary={}):
for key, value in group.attrs.iteritems():
if type(value) is np.string_:
if value == '_None_':
value = None
else:
try:
value = value.decode('utf8')
except UnicodeError:
# For old files
value = value.decode('latin-1')
elif type(value) is np.bool_:
value = bool(value)
elif type(value) is np.ndarray and \
value.dtype == np.dtype('|S1'):
value = value.tolist()
# skip signals - these are handled below.
if key.startswith('_sig_'):
pass
else:
dictionary[key] = value
if not isinstance(group, h5py.Dataset):
for key in group.keys():
if key.startswith('_sig_'):
from hyperspy.io import dict2signal
dictionary[key[len('_sig_'):]] = (dict2signal(
hdfgroup2signaldict(group[key])))
elif isinstance(group[key], h5py.Dataset):
dictionary[key] = np.array(group[key])
elif key.startswith('_hspy_AxesManager_'):
dictionary[key[len('_hspy_AxesManager_'):]] = \
AxesManager([i
for k, i in sorted(iter(
hdfgroup2dict(group[key]).iteritems()))])
else:
dictionary[key] = {}
hdfgroup2dict(group[key], dictionary[key])
return dictionary
def setup(self):
self.axes_list = [
{'name': 'x',
'navigate': True,
'offset': 0.0,
'scale': 1E-6,
'size': 1024,
'units': 'm'},
{'name': 'y',
'navigate': True,
'offset': 0.0,
'scale': 0.5E-9,
'size': 1024,
'units': 'm'},
{'name': 'energy',
'navigate': False,
'offset': 0.0,
'scale': 5.0,
'size': 4096,
'units': 'eV'}]
self.am = AxesManager(self.axes_list)
def do_iffts():
j = 0
for s in signals:
ffts = s.deepcopy()
if ffts.data.itemsize <= 4:
ffts.change_dtype(np.float32)
else:
ffts.change_dtype(np.float64)
am = AxesManager(s.axes_manager._get_axes_dicts())
for i in range(ffts.axes_manager.signal_dimension):
axis = ffts.axes_manager.signal_axes[i]
s_axis = s.axes_manager.signal_axes[i]
shift = (axis.high_value - axis.low_value) / 2
axis.offset += shift
axis.scale = 1 / (s_axis.size * s_axis.scale)
u = s_axis.units
if u is traits.Undefined:
pass # Leave unit as undefined
elif u.endswith('-1'):
u = u[:-2]
else:
u += '-1'
axis.units = u
for idx in am:
fftdata = s.data[am._getitem_tuple]
fftdata = scipy.fftpack.ifftshift(fftdata)
fftdata = scipy.fftpack.ifftn(fftdata)
fftdata = np.abs(fftdata)
ffts.data[am._getitem_tuple] = fftdata
j += 1
yield j
indstr = ' ' + str(s.axes_manager.indices) \
if len(s.axes_manager.indices) > 0 else ''
ffts.metadata.General.title = 'Inverse FFT of ' + \
ffts.metadata.General.title + indstr
fftsignals.append(ffts)
def load_dictionary(self, file_data_dict):
"""Parameters:
-----------
file_data_dict : dictionary
A dictionary containing at least a 'data' keyword with an array of
arbitrary dimensions. Additionally the dictionary can contain the
following keys:
axes: a dictionary that defines the axes (see the
AxesManager class)
attributes: a dictionary which keywords are stored as
attributes of the signal class
mapped_parameters: a dictionary containing a set of parameters
that will be stored as attributes of a Parameters class.
For some subclasses some particular parameters might be
mandatory.
original_parameters: a dictionary that will be accesible in the
original_parameters attribute of the signal class and that
typically contains all the parameters that has been
imported from the original data file.
"""
self.data = file_data_dict['data']
if 'axes' not in file_data_dict:
file_data_dict['axes'] = self._get_undefined_axes_list()
self.axes_manager = AxesManager(
file_data_dict['axes'])
if not 'mapped_parameters' in file_data_dict:
file_data_dict['mapped_parameters'] = {}
if not 'original_parameters' in file_data_dict:
file_data_dict['original_parameters'] = {}
if 'attributes' in file_data_dict:
for key, value in file_data_dict['attributes'].iteritems():
self.__setattr__(key, value)
self.original_parameters.load_dictionary(
file_data_dict['original_parameters'])
self.mapped_parameters.load_dictionary(
file_data_dict['mapped_parameters'])
class TestAxesManager:
def setup(self):
self.axes_list = [
{'name': 'x',
'navigate': True,
'offset': 0.0,
'scale': 1E-6,
'size': 1024,
'units': 'm'},
{'name': 'y',
'navigate': True,
'offset': 0.0,
'scale': 0.5E-9,
'size': 1024,
'units': 'm'},
{'name': 'energy',
'navigate': False,
'offset': 0.0,
'scale': 5.0,
'size': 4096,
'units': 'eV'}]
self.am = AxesManager(self.axes_list)
def test_convenient_scale_unit(self):
self.am.convert_units()
nt.assert_almost_equal(self.am['x'].scale, 1.0, places=5)
nt.assert_equal(self.am['x'].units, 'µm')
nt.assert_almost_equal(self.am['y'].scale, 0.5, places=5)
nt.assert_equal(self.am['y'].units, 'nm')
nt.assert_almost_equal(self.am['energy'].scale, 0.005, places=5)
nt.assert_equal(self.am['energy'].units, 'keV')
def test_convert_to_navigation_units(self):
self.am.convert_units(axes='navigation', units='µm')
nt.assert_almost_equal(self.am['x'].scale, 1.0, places=5)
nt.assert_equal(self.am['x'].units, 'µm')
nt.assert_almost_equal(self.am['y'].scale, 0.5E-3, places=5)
nt.assert_equal(self.am['y'].units, 'µm')
nt.assert_almost_equal(self.am['energy'].scale,
self.axes_list[-1]['scale'], places=5)
nt.assert_equal(self.am['energy'].units, self.axes_list[-1]['units'])
def test_convert_to_navigation_units_list(self):
self.am.convert_units(axes='navigation', units=['µm', 'nm'])
nt.assert_almost_equal(self.am['x'].scale, 1000.0, places=5)
nt.assert_equal(self.am['x'].units, 'nm')
nt.assert_almost_equal(self.am['y'].scale, 0.5E-3, places=5)
nt.assert_equal(self.am['y'].units, 'µm')
nt.assert_almost_equal(self.am['energy'].scale,
self.axes_list[-1]['scale'], places=5)
nt.assert_equal(self.am['energy'].units, self.axes_list[-1]['units'])
def test_convert_to_signal_units(self):
self.am.convert_units(axes='signal', units='keV')
nt.assert_almost_equal(self.am['x'].scale, self.axes_list[0]['scale'],
places=5)
nt.assert_equal(self.am['x'].units, self.axes_list[0]['units'])
nt.assert_almost_equal(self.am['y'].scale, self.axes_list[1]['scale'],
places=5)
nt.assert_equal(self.am['y'].units, self.axes_list[1]['units'])
nt.assert_almost_equal(self.am['energy'].scale, 0.005, places=5)
nt.assert_equal(self.am['energy'].units, 'keV')
def test_convert_to_units_list(self):
self.am.convert_units(units=['µm', 'nm', 'meV'])
nt.assert_almost_equal(self.am['x'].scale, 1000.0, places=5)
nt.assert_equal(self.am['x'].units, 'nm')
nt.assert_almost_equal(self.am['y'].scale, 0.5E-3, places=5)
nt.assert_equal(self.am['y'].units, 'µm')
nt.assert_almost_equal(self.am['energy'].scale, 5E3, places=5)
nt.assert_equal(self.am['energy'].units, 'meV')
class Signal(t.HasTraits, MVA):
data = t.Any()
axes_manager = t.Instance(AxesManager)
original_parameters = t.Instance(Parameters)
mapped_parameters = t.Instance(Parameters)
physical_property = t.Str()
def __init__(self, file_data_dict=None, *args, **kw):
"""All data interaction is made through this class or its subclasses
Parameters:
-----------
dictionary : dictionary
see load_dictionary for the format
"""
super(Signal, self).__init__()
self.mapped_parameters = Parameters()
self.original_parameters = Parameters()
if type(file_data_dict).__name__ == "dict":
self.load_dictionary(file_data_dict)
self._plot = None
self.mva_results=MVA_Results()
self._shape_before_unfolding = None
self._axes_manager_before_unfolding = None
def load_dictionary(self, file_data_dict):
"""Parameters:
-----------
file_data_dict : dictionary
A dictionary containing at least a 'data' keyword with an array of
arbitrary dimensions. Additionally the dictionary can contain the
following keys:
axes: a dictionary that defines the axes (see the
AxesManager class)
attributes: a dictionary which keywords are stored as
attributes of the signal class
mapped_parameters: a dictionary containing a set of parameters
that will be stored as attributes of a Parameters class.
For some subclasses some particular parameters might be
mandatory.
original_parameters: a dictionary that will be accesible in the
original_parameters attribute of the signal class and that
typically contains all the parameters that has been
imported from the original data file.
"""
self.data = file_data_dict['data']
if 'axes' not in file_data_dict:
file_data_dict['axes'] = self._get_undefined_axes_list()
self.axes_manager = AxesManager(
file_data_dict['axes'])
if not 'mapped_parameters' in file_data_dict:
file_data_dict['mapped_parameters'] = {}
if not 'original_parameters' in file_data_dict:
file_data_dict['original_parameters'] = {}
if 'attributes' in file_data_dict:
for key, value in file_data_dict['attributes'].iteritems():
self.__setattr__(key, value)
self.original_parameters.load_dictionary(
file_data_dict['original_parameters'])
self.mapped_parameters.load_dictionary(
file_data_dict['mapped_parameters'])
def _get_signal_dict(self):
dic = {}
dic['data'] = self.data.copy()
dic['axes'] = self.axes_manager._get_axes_dicts()
dic['mapped_parameters'] = \
self.mapped_parameters._get_parameters_dictionary()
dic['original_parameters'] = \
self.original_parameters._get_parameters_dictionary()
return dic
def _get_undefined_axes_list(self):
axes = []
for i in xrange(len(self.data.shape)):
axes.append({
'name': 'undefined',
'scale': 1.,
'offset': 0.,
'size': int(self.data.shape[i]),
'units': 'undefined',
'index_in_array': i, })
return axes
def __call__(self, axes_manager=None):
if axes_manager is None:
axes_manager = self.axes_manager
return self.data.__getitem__(axes_manager._getitem_tuple)
def _get_hse_1D_explorer(self, *args, **kwargs):
islice = self.axes_manager._slicing_axes[0].index_in_array
inslice = self.axes_manager._non_slicing_axes[0].index_in_array
if islice > inslice:
return self.data.squeeze()
else:
return self.data.squeeze().T
def _get_hse_2D_explorer(self, *args, **kwargs):
islice = self.axes_manager._slicing_axes[0].index_in_array
data = self.data.sum(islice)
return data
def _get_hie_explorer(self, *args, **kwargs):
isslice = [self.axes_manager._slicing_axes[0].index_in_array,
self.axes_manager._slicing_axes[1].index_in_array]
isslice.sort()
data = self.data.sum(isslice[1]).sum(isslice[0])
return data
def _get_explorer(self, *args, **kwargs):
nav_dim = self.axes_manager.navigation_dimension
if self.axes_manager.signal_dimension == 1:
if nav_dim == 1:
return self._get_hse_1D_explorer(*args, **kwargs)
elif nav_dim == 2:
return self._get_hse_2D_explorer(*args, **kwargs)
else:
return None
if self.axes_manager.signal_dimension == 2:
if nav_dim == 1 or nav_dim == 2:
return self._get_hie_explorer(*args, **kwargs)
else:
return None
else:
return None
def plot(self, axes_manager=None):
if self._plot is not None:
try:
self._plot.close()
except:
# If it was already closed it will raise an exception,
# but we want to carry on...
pass
if axes_manager is None:
axes_manager = self.axes_manager
if axes_manager.signal_dimension == 1:
# Hyperspectrum
self._plot = mpl_hse.MPL_HyperSpectrum_Explorer()
self._plot.spectrum_data_function = self.__call__
self._plot.spectrum_title = self.mapped_parameters.name
self._plot.xlabel = '%s (%s)' % (
self.axes_manager._slicing_axes[0].name,
self.axes_manager._slicing_axes[0].units)
self._plot.ylabel = 'Intensity'
self._plot.axes_manager = axes_manager
self._plot.axis = self.axes_manager._slicing_axes[0].axis
# Image properties
if self.axes_manager._non_slicing_axes:
self._plot.image_data_function = self._get_explorer
self._plot.image_title = ''
self._plot.pixel_size = \
self.axes_manager._non_slicing_axes[0].scale
self._plot.pixel_units = \
self.axes_manager._non_slicing_axes[0].units
self._plot.plot()
elif axes_manager.signal_dimension == 2:
# Mike's playground with new plotting toolkits - needs to be a
# branch.
"""
if len(self.data.shape)==2:
from drawing.guiqwt_hie import image_plot_2D
image_plot_2D(self)
import drawing.chaco_hie
self._plot = drawing.chaco_hie.Chaco_HyperImage_Explorer(self)
self._plot.configure_traits()
"""
self._plot = mpl_hie.MPL_HyperImage_Explorer()
self._plot.image_data_function = self.__call__
self._plot.navigator_data_function = self._get_explorer
self._plot.axes_manager = axes_manager
self._plot.plot()
else:
messages.warning_exit('Plotting is not supported for this view')
traits_view = tui.View(
tui.Item('name'),
tui.Item('physical_property'),
tui.Item('units'),
tui.Item('offset'),
tui.Item('scale'),)
def plot_residual(self, axes_manager=None):
"""Plot the residual between original data and reconstructed data
Requires you to have already run PCA or ICA, and to reconstruct data
using either the pca_build_SI or ica_build_SI methods.
"""
if hasattr(self, 'residual'):
self.residual.plot(axes_manager)
else:
print "Object does not have any residual information. Is it a \
reconstruction created using either pca_build_SI or ica_build_SI methods?"
def save(self, filename, only_view = False, **kwds):
"""Saves the signal in the specified format.
The function gets the format from the extension. You can use:
- hdf5 for HDF5
- nc for NetCDF
- msa for EMSA/MSA single spectrum saving.
- bin to produce a raw binary file
- Many image formats such as png, tiff, jpeg...
Please note that not all the formats supports saving datasets of
arbitrary dimensions, e.g. msa only suports 1D data.
Parameters
----------
filename : str
msa_format : {'Y', 'XY'}
'Y' will produce a file without the energy axis. 'XY' will also
save another column with the energy axis. For compatibility with
Gatan Digital Micrograph 'Y' is the default.
only_view : bool
If True, only the current view will be saved. Otherwise the full
dataset is saved. Please note that not all the formats support this
option at the moment.
"""
io.save(filename, self, **kwds)
def _replot(self):
if self._plot is not None:
if self._plot.is_active() is True:
self.plot()
def get_dimensions_from_data(self):
"""Get the dimension parameters from the data_cube. Useful when the
data_cube was externally modified, or when the SI was not loaded from
a file
"""
dc = self.data
for axis in self.axes_manager.axes:
axis.size = int(dc.shape[axis.index_in_array])
print("%s size: %i" %
(axis.name, dc.shape[axis.index_in_array]))
self._replot()
def crop_in_pixels(self, axis, i1 = None, i2 = None):
"""Crops the data in a given axis. The range is given in pixels
axis : int
i1 : int
Start index
i2 : int
End index
See also:
---------
crop_in_units
"""
axis = self._get_positive_axis_index_index(axis)
if i1 is not None:
new_offset = self.axes_manager.axes[axis].axis[i1]
# We take a copy to guarantee the continuity of the data
self.data = self.data[
(slice(None),)*axis + (slice(i1, i2), Ellipsis)].copy()
if i1 is not None:
self.axes_manager.axes[axis].offset = new_offset
self.get_dimensions_from_data()
def crop_in_units(self, axis, x1 = None, x2 = None):
"""Crops the data in a given axis. The range is given in the units of
the axis
axis : int
i1 : int
Start index
i2 : int
End index
See also:
---------
crop_in_pixels
"""
i1 = self.axes_manager.axes[axis].value2index(x1)
i2 = self.axes_manager.axes[axis].value2index(x2)
self.crop_in_pixels(axis, i1, i2)
def roll_xy(self, n_x, n_y = 1):
"""Roll over the x axis n_x positions and n_y positions the former rows
This method has the purpose of "fixing" a bug in the acquisition of the
Orsay's microscopes and probably it does not have general interest
Parameters
----------
n_x : int
n_y : int
Note: Useful to correct the SI column storing bug in Marcel's
acquisition routines.
"""
self.data = np.roll(self.data, n_x, 0)
self.data[:n_x, ...] = np.roll(self.data[:n_x, ...], n_y, 1)
self._replot()
# TODO: After using this function the plotting does not work
def swap_axis(self, axis1, axis2):
"""Swaps the axes
Parameters
----------
axis1 : positive int
axis2 : positive int
"""
self.data = self.data.swapaxes(axis1, axis2)
c1 = self.axes_manager.axes[axis1]
c2 = self.axes_manager.axes[axis2]
c1.index_in_array, c2.index_in_array = \
c2.index_in_array, c1.index_in_array
self.axes_manager.axes[axis1] = c2
self.axes_manager.axes[axis2] = c1
self.axes_manager.set_signal_dimension()
self._replot()
def rebin(self, new_shape):
"""
Rebins the data to the new shape
Parameters
----------
new_shape: tuple of ints
The new shape must be a divisor of the original shape
"""
factors = np.array(self.data.shape) / np.array(new_shape)
self.data = utils.rebin(self.data, new_shape)
for axis in self.axes_manager.axes:
axis.scale *= factors[axis.index_in_array]
self.get_dimensions_from_data()
def split_in(self, axis, number_of_parts = None, steps = None):
"""Splits the data
The split can be defined either by the `number_of_parts` or by the
`steps` size.
Parameters
----------
number_of_parts : int or None
Number of parts in which the SI will be splitted
steps : int or None
Size of the splitted parts
axis : int
The splitting axis
Return
------
tuple with the splitted signals
"""
axis = self._get_positive_axis_index_index(axis)
if number_of_parts is None and steps is None:
if not self._splitting_steps:
messages.warning_exit(
"Please provide either number_of_parts or a steps list")
else:
steps = self._splitting_steps
print "Splitting in ", steps
elif number_of_parts is not None and steps is not None:
print "Using the given steps list. number_of_parts dimissed"
splitted = []
shape = self.data.shape
if steps is None:
rounded = (shape[axis] - (shape[axis] % number_of_parts))
step = rounded / number_of_parts
cut_node = range(0, rounded+step, step)
else:
cut_node = np.array([0] + steps).cumsum()
for i in xrange(len(cut_node)-1):
data = self.data[
(slice(None), ) * axis + (slice(cut_node[i], cut_node[i + 1]),
Ellipsis)]
s = Signal({'data': data})
# TODO: When copying plotting does not work
# s.axes = copy.deepcopy(self.axes_manager)
s.get_dimensions_from_data()
splitted.append(s)
return splitted
def unfold_if_multidim(self):
"""Unfold the datacube if it is >2D
Returns
-------
Boolean. True if the data was unfolded by the function.
"""
if len(self.axes_manager.axes)>2:
print "Automatically unfolding the data"
self.unfold()
return True
else:
return False
def _unfold(self, steady_axes, unfolded_axis):
"""Modify the shape of the data by specifying the axes the axes which
dimension do not change and the axis over which the remaining axes will
be unfolded
Parameters
----------
steady_axes : list
The indexes of the axes which dimensions do not change
unfolded_axis : int
The index of the axis over which all the rest of the axes (except
the steady axes) will be unfolded
See also
--------
fold
"""
# It doesn't make sense unfolding when dim < 3
if len(self.data.squeeze().shape) < 3:
return False
# We need to store the original shape and coordinates to be used by
# the fold function only if it has not been already stored by a
# previous unfold
if self._shape_before_unfolding is None:
self._shape_before_unfolding = self.data.shape
self._axes_manager_before_unfolding = self.axes_manager
new_shape = [1] * len(self.data.shape)
for index in steady_axes:
new_shape[index] = self.data.shape[index]
new_shape[unfolded_axis] = -1
self.data = self.data.reshape(new_shape)
self.axes_manager = self.axes_manager.deepcopy()
i = 0
uname = ''
uunits = ''
to_remove = []
for axis, dim in zip(self.axes_manager.axes, new_shape):
if dim == 1:
uname += ',' + axis.name
uunits = ',' + axis.units
to_remove.append(axis)
else:
axis.index_in_array = i
i += 1
self.axes_manager.axes[unfolded_axis].name += uname
self.axes_manager.axes[unfolded_axis].units += uunits
self.axes_manager.axes[unfolded_axis].size = \
self.data.shape[unfolded_axis]
for axis in to_remove:
self.axes_manager.axes.remove(axis)
self.data = self.data.squeeze()
self._replot()
def unfold(self):
"""Modifies the shape of the data by unfolding the signal and
navigation dimensions separaterly
"""
self.unfold_navigation_space()
self.unfold_signal_space()
def unfold_navigation_space(self):
"""Modify the shape of the data to obtain a navigation space of
dimension 1
"""
if self.axes_manager.navigation_dimension < 2:
messages.information('Nothing done, the navigation dimension was '
'already 1')
return False
steady_axes = [
axis.index_in_array for axis in
self.axes_manager._slicing_axes]
unfolded_axis = self.axes_manager._non_slicing_axes[-1].index_in_array
self._unfold(steady_axes, unfolded_axis)
def unfold_signal_space(self):
"""Modify the shape of the data to obtain a signal space of
dimension 1
"""
if self.axes_manager.signal_dimension < 2:
messages.information('Nothing done, the signal dimension was '
'already 1')
return False
steady_axes = [
axis.index_in_array for axis in
self.axes_manager._non_slicing_axes]
unfolded_axis = self.axes_manager._slicing_axes[-1].index_in_array
self._unfold(steady_axes, unfolded_axis)
def fold(self):
"""If the signal was previously unfolded, folds it back"""
if self._shape_before_unfolding is not None:
self.data = self.data.reshape(self._shape_before_unfolding)
self.axes_manager = self._axes_manager_before_unfolding
self._shape_before_unfolding = None
self._axes_manager_before_unfolding = None
self._replot()
def _get_positive_axis_index_index(self, axis):
if axis < 0:
axis = len(self.data.shape) + axis
return axis
def iterate_axis(self, axis = -1):
# We make a copy to guarantee that the data in contiguous, otherwise
# it will not return a view of the data
self.data = self.data.copy()
axis = self._get_positive_axis_index_index(axis)
unfolded_axis = axis - 1
new_shape = [1] * len(self.data.shape)
new_shape[axis] = self.data.shape[axis]
new_shape[unfolded_axis] = -1
# Warning! if the data is not contigous it will make a copy!!
data = self.data.reshape(new_shape)
for i in xrange(data.shape[unfolded_axis]):
getitem = [0] * len(data.shape)
getitem[axis] = slice(None)
getitem[unfolded_axis] = i
yield(data[getitem])
def sum(self, axis, return_signal = False):
"""Sum the data over the specify axis
Parameters
----------
axis : int
The axis over which the operation will be performed
return_signal : bool
If False the operation will be performed on the current object. If
True, the current object will not be modified and the operation
will be performed in a new signal object that will be returned.
Returns
-------
Depending on the value of the return_signal keyword, nothing or a
signal instance
See also
--------
sum_in_mask, mean
Usage
-----
>>> import numpy as np
>>> s = Signal({'data' : np.random.random((64,64,1024))})
>>> s.data.shape
(64,64,1024)
>>> s.sum(-1)
>>> s.data.shape
(64,64)
# If we just want to plot the result of the operation
s.sum(-1, True).plot()
"""
if return_signal is True:
s = self.deepcopy()
else:
s = self
s.data = s.data.sum(axis)
s.axes_manager.axes.remove(s.axes_manager.axes[axis])
for _axis in s.axes_manager.axes:
if _axis.index_in_array > axis:
_axis.index_in_array -= 1
s.axes_manager.set_signal_dimension()
if return_signal is True:
return s
def mean(self, axis, return_signal = False):
"""Average the data over the specify axis
Parameters
----------
axis : int
The axis over which the operation will be performed
return_signal : bool
If False the operation will be performed on the current object. If
True, the current object will not be modified and the operation
will be performed in a new signal object that will be returned.
Returns
-------
Depending on the value of the return_signal keyword, nothing or a
signal instance
See also
--------
sum_in_mask, mean
Usage
-----
>>> import numpy as np
>>> s = Signal({'data' : np.random.random((64,64,1024))})
>>> s.data.shape
(64,64,1024)
>>> s.mean(-1)
>>> s.data.shape
(64,64)
# If we just want to plot the result of the operation
s.mean(-1, True).plot()
"""
if return_signal is True:
s = self.deepcopy()
else:
s = self
s.data = s.data.mean(axis)
s.axes_manager.axes.remove(s.axes_manager.axes[axis])
for _axis in s.axes_manager.axes:
if _axis.index_in_array > axis:
_axis.index_in_array -= 1
s.axes_manager.set_signal_dimension()
if return_signal is True:
return s
def copy(self):
return(copy.copy(self))
def deepcopy(self):
return(copy.deepcopy(self))
# def sum_in_mask(self, mask):
# """Returns the result of summing all the spectra in the mask.
#
# Parameters
# ----------
# mask : boolean numpy array
#
# Returns
# -------
# Spectrum
# """
# dc = self.data_cube.copy()
# mask3D = mask.reshape([1,] + list(mask.shape)) * np.ones(dc.shape)
# dc = (mask3D*dc).sum(1).sum(1) / mask.sum()
# s = Spectrum()
# s.data_cube = dc.reshape((-1,1,1))
# s.get_dimensions_from_cube()
# utils.copy_energy_calibration(self,s)
# return s
#
# def mean(self, axis):
# """Average the SI over the given axis
#
# Parameters
# ----------
# axis : int
# """
# dc = self.data_cube
# dc = dc.mean(axis)
# dc = dc.reshape(list(dc.shape) + [1,])
# self.data_cube = dc
# self.get_dimensions_from_cube()
#
# def roll(self, axis = 2, shift = 1):
# """Roll the SI. see numpy.roll
#
# Parameters
# ----------
# axis : int
# shift : int
# """
# self.data_cube = np.roll(self.data_cube, shift, axis)
# self._replot()
#
#
# def get_calibration_from(self, s):
# """Copy the calibration from another Spectrum instance
# Parameters
# ----------
# s : spectrum instance
# """
# utils.copy_energy_calibration(s, self)
#
# def estimate_variance(self, dc = None, gaussian_noise_var = None):
# """Variance estimation supposing Poissonian noise
#
# Parameters
# ----------
# dc : None or numpy array
# If None the SI is used to estimate its variance. Otherwise, the
# provided array will be used.
# Note
# ----
# The gain_factor and gain_offset from the aquisition parameters are used
# """
# print "Variace estimation using the following values:"
# print "Gain factor = ", self.acquisition_parameters.gain_factor
# print "Gain offset = ", self.acquisition_parameters.gain_offset
# if dc is None:
# dc = self.data_cube
# gain_factor = self.acquisition_parameters.gain_factor
# gain_offset = self.acquisition_parameters.gain_offset
# self.variance = dc*gain_factor + gain_offset
# if self.variance.min() < 0:
# if gain_offset == 0 and gaussian_noise_var is None:
# print "The variance estimation results in negative values"
# print "Maybe the gain_offset is wrong?"
# self.variance = None
# return
# elif gaussian_noise_var is None:
# print "Clipping the variance to the gain_offset value"
# self.variance = np.clip(self.variance, np.abs(gain_offset),
# np.Inf)
# else:
# print "Clipping the variance to the gaussian_noise_var"
# self.variance = np.clip(self.variance, gaussian_noise_var,
# np.Inf)
#
# def calibrate(self, lcE = 642.6, rcE = 849.7, lc = 161.9, rc = 1137.6,
# modify_calibration = True):
# dispersion = (rcE - lcE) / (rc - lc)
# origin = lcE - dispersion * lc
# print "Energy step = ", dispersion
# print "Energy origin = ", origin
# if modify_calibration is True:
# self.set_new_calibration(origin, dispersion)
# return origin, dispersion
#
def _correct_navigation_mask_when_unfolded(self, navigation_mask = None,):
#if 'unfolded' in self.history:
if navigation_mask is not None:
navigation_mask = navigation_mask.reshape((-1,))
return navigation_mask
class TestAxesManager:
def setup_method(self, method):
self.axes_list = [
{'name': 'x',
'navigate': True,
'offset': 0.0,
'scale': 1.5E-9,
'size': 1024,
'units': 'm'},
{'name': 'y',
'navigate': True,
'offset': 0.0,
'scale': 0.5E-9,
'size': 1024,
'units': 'm'},
{'name': 'energy',
'navigate': False,
'offset': 0.0,
'scale': 5.0,
'size': 4096,
'units': 'eV'}]
self.am = AxesManager(self.axes_list)
self.axes_list2 = [
{'name': 'x',
'navigate': True,
'offset': 0.0,
'scale': 1.5E-9,
'size': 1024,
'units': 'm'},
{'name': 'energy',
'navigate': False,
'offset': 0.0,
'scale': 2.5,
'size': 4096,
'units': 'eV'},
{'name': 'energy2',
'navigate': False,
'offset': 0.0,
'scale': 5.0,
'size': 4096,
'units': 'eV'}]
self.am2 = AxesManager(self.axes_list2)
def test_compact_unit(self):
self.am.convert_units()
assert self.am['x'].units == 'nm'
nt.assert_almost_equal(self.am['x'].scale, 1.5)
assert self.am['y'].units == 'nm'
nt.assert_almost_equal(self.am['y'].scale, 0.5)
assert self.am['energy'].units == 'keV'
nt.assert_almost_equal(self.am['energy'].scale, 0.005)
def test_convert_to_navigation_units(self):
self.am.convert_units(axes='navigation', units='mm')
nt.assert_almost_equal(self.am['x'].scale, 1.5E-6)
assert self.am['x'].units == 'mm'
nt.assert_almost_equal(self.am['y'].scale, 0.5E-6)
assert self.am['y'].units == 'mm'
nt.assert_almost_equal(self.am['energy'].scale,
self.axes_list[-1]['scale'])
def test_convert_units_axes_integer(self):
# convert only the first axis
self.am.convert_units(axes=0, units='nm', same_units=False)
nt.assert_almost_equal(self.am[0].scale, 0.5)
assert self.am[0].units == 'nm'
nt.assert_almost_equal(self.am['x'].scale, 1.5E-9)
assert self.am['x'].units == 'm'
nt.assert_almost_equal(self.am['energy'].scale,
self.axes_list[-1]['scale'])
self.am.convert_units(axes=0, units='nm', same_units=True)
nt.assert_almost_equal(self.am[0].scale, 0.5)
assert self.am[0].units == 'nm'
nt.assert_almost_equal(self.am['x'].scale, 1.5)
assert self.am['x'].units == 'nm'
def test_convert_to_navigation_units_list(self):
self.am.convert_units(axes='navigation', units=['mm', 'nm'],
same_units=False)
nt.assert_almost_equal(self.am['x'].scale, 1.5)
assert self.am['x'].units == 'nm'
nt.assert_almost_equal(self.am['y'].scale, 0.5E-6)
assert self.am['y'].units == 'mm'
nt.assert_almost_equal(self.am['energy'].scale,
self.axes_list[-1]['scale'])
def test_convert_to_navigation_units_list_same_units(self):
self.am.convert_units(axes='navigation', units=['mm', 'nm'],
same_units=True)
assert self.am['x'].units == 'mm'
nt.assert_almost_equal(self.am['x'].scale, 1.5e-6)
assert self.am['y'].units == 'mm'
nt.assert_almost_equal(self.am['y'].scale, 0.5e-6)
assert self.am['energy'].units == 'eV'
nt.assert_almost_equal(self.am['energy'].scale, 5)
def test_convert_to_navigation_units_different(self):
# Don't convert the units since the units of the navigation axes are
# different
self.axes_list.insert(0,
{'name': 'time',
'navigate': True,
'offset': 0.0,
'scale': 1.5,
'size': 20,
'units': 's'})
am = AxesManager(self.axes_list)
am.convert_units(axes='navigation', same_units=True)
assert am['time'].units == 's'
nt.assert_almost_equal(am['time'].scale, 1.5)
assert am['x'].units == 'nm'
nt.assert_almost_equal(am['x'].scale, 1.5)
assert am['y'].units == 'nm'
nt.assert_almost_equal(am['y'].scale, 0.5)
assert am['energy'].units == 'eV'
nt.assert_almost_equal(am['energy'].scale, 5)
def test_convert_to_navigation_units_Undefined(self):
self.axes_list[0]['units'] = t.Undefined
am = AxesManager(self.axes_list)
am.convert_units(axes='navigation', same_units=True)
assert am['x'].units == t.Undefined
nt.assert_almost_equal(am['x'].scale, 1.5E-9)
assert am['y'].units == 'm'
nt.assert_almost_equal(am['y'].scale, 0.5E-9)
assert am['energy'].units == 'eV'
nt.assert_almost_equal(am['energy'].scale, 5)
def test_convert_to_signal_units(self):
self.am.convert_units(axes='signal', units='keV')
nt.assert_almost_equal(self.am['x'].scale, self.axes_list[0]['scale'])
assert self.am['x'].units == self.axes_list[0]['units']
nt.assert_almost_equal(self.am['y'].scale, self.axes_list[1]['scale'])
assert self.am['y'].units == self.axes_list[1]['units']
nt.assert_almost_equal(self.am['energy'].scale, 0.005)
assert self.am['energy'].units == 'keV'
def test_convert_to_units_list(self):
self.am.convert_units(units=['µm', 'nm', 'meV'], same_units=False)
nt.assert_almost_equal(self.am['x'].scale, 1.5)
assert self.am['x'].units == 'nm'
nt.assert_almost_equal(self.am['y'].scale, 0.5E-3)
assert self.am['y'].units == 'um'
nt.assert_almost_equal(self.am['energy'].scale, 5E3)
assert self.am['energy'].units == 'meV'
def test_convert_to_units_list_same_units(self):
self.am2.convert_units(units=['µm', 'eV', 'meV'], same_units=True)
nt.assert_almost_equal(self.am2['x'].scale, 0.0015)
assert self.am2['x'].units == 'um'
nt.assert_almost_equal(self.am2['energy'].scale,
self.axes_list2[1]['scale'])
assert self.am2['energy'].units == self.axes_list2[1]['units']
nt.assert_almost_equal(self.am2['energy2'].scale,
self.axes_list2[2]['scale'])
assert self.am2['energy2'].units == self.axes_list2[2]['units']
def test_convert_to_units_list_signal2D(self):
self.am2.convert_units(units=['µm', 'eV', 'meV'], same_units=False)
nt.assert_almost_equal(self.am2['x'].scale, 0.0015)
assert self.am2['x'].units == 'um'
nt.assert_almost_equal(self.am2['energy'].scale, 2500)
assert self.am2['energy'].units == 'meV'
nt.assert_almost_equal(self.am2['energy2'].scale, 5.0)
assert self.am2['energy2'].units == 'eV'
@pytest.mark.parametrize("same_units", (True, False))
def test_convert_to_units_unsupported_units(self, same_units):
with assert_warns(
message="not supported for conversion.",
category=UserWarning):
self.am.convert_units('navigation', units='toto',
same_units=same_units)
assert_deep_almost_equal(self.am._get_axes_dicts(),
self.axes_list)
def hdfgroup2dict(group, dictionary=None, load_to_memory=True):
if dictionary is None:
dictionary = {}
for key, value in group.attrs.iteritems():
if isinstance(value, (np.string_, str)):
if value == '_None_':
value = None
elif isinstance(value, np.bool_):
value = bool(value)
elif isinstance(value, np.ndarray) and \
value.dtype == np.dtype('|S1'):
value = value.tolist()
# skip signals - these are handled below.
if key.startswith('_sig_'):
pass
elif key.startswith('_list_empty_'):
dictionary[key[len('_list_empty_'):]] = []
elif key.startswith('_tuple_empty_'):
dictionary[key[len('_tuple_empty_'):]] = ()
elif key.startswith('_bs_'):
dictionary[key[len('_bs_'):]] = value.tostring()
elif key.startswith('_datetime_'):
dictionary[key.replace("_datetime_", "")] = eval(value)
else:
dictionary[key] = value
if not isinstance(group, h5py.Dataset):
for key in group.keys():
if key.startswith('_sig_'):
from hyperspy.io import dict2signal
dictionary[key[len('_sig_'):]] = (
dict2signal(hdfgroup2signaldict(group[key],
load_to_memory=load_to_memory)))
elif isinstance(group[key], h5py.Dataset):
if key.startswith("_list_"):
ans = np.array(group[key])
ans = ans.tolist()
kn = key[6:]
elif key.startswith("_tuple_"):
ans = np.array(group[key])
ans = tuple(ans.tolist())
kn = key[7:]
elif load_to_memory:
ans = np.array(group[key])
kn = key
else:
# leave as h5py dataset
ans = group[key]
kn = key
dictionary[kn] = ans
elif key.startswith('_hspy_AxesManager_'):
dictionary[key[len('_hspy_AxesManager_'):]] = \
AxesManager([i
for k, i in sorted(iter(
hdfgroup2dict(group[key], load_to_memory=load_to_memory).iteritems()))])
elif key.startswith('_list_'):
dictionary[key[7 + key[6:].find('_'):]] = \
[i for k, i in sorted(iter(
hdfgroup2dict(group[key], load_to_memory=load_to_memory).iteritems()))]
elif key.startswith('_tuple_'):
dictionary[key[8 + key[7:].find('_'):]] = tuple(
[i for k, i in sorted(iter(
hdfgroup2dict(group[key], load_to_memory=load_to_memory).iteritems()))])
else:
dictionary[key] = {}
hdfgroup2dict(
group[key],
dictionary[key],
load_to_memory=load_to_memory)
return dictionary
def _group2dict(self, group, dictionary=None, lazy=False):
if dictionary is None:
dictionary = {}
for key, value in group.attrs.items():
if isinstance(value, bytes):
value = value.decode()
if isinstance(value, (np.string_, str)):
if value == '_None_':
value = None
elif isinstance(value, np.bool_):
value = bool(value)
elif isinstance(value, np.ndarray) and value.dtype.char == "S":
# Convert strings to unicode
value = value.astype("U")
if value.dtype.str.endswith("U1"):
value = value.tolist()
# skip signals - these are handled below.
if key.startswith('_sig_'):
pass
elif key.startswith('_list_empty_'):
dictionary[key[len('_list_empty_'):]] = []
elif key.startswith('_tuple_empty_'):
dictionary[key[len('_tuple_empty_'):]] = ()
elif key.startswith('_bs_'):
dictionary[key[len('_bs_'):]] = value.tobytes()
# The following two elif stataments enable reading date and time from
# v < 2 of HyperSpy's metadata specifications
elif key.startswith('_datetime_date'):
date_iso = datetime.date(
*ast.literal_eval(value[value.index("("):])).isoformat()
dictionary[key.replace("_datetime_", "")] = date_iso
elif key.startswith('_datetime_time'):
date_iso = datetime.time(
*ast.literal_eval(value[value.index("("):])).isoformat()
dictionary[key.replace("_datetime_", "")] = date_iso
else:
dictionary[key] = value
if not isinstance(group, self.Dataset):
for key in group.keys():
if key.startswith('_sig_'):
from hyperspy.io import dict2signal
dictionary[key[len('_sig_'):]] = (
dict2signal(self.group2signaldict(
group[key], lazy=lazy)))
elif isinstance(group[key], self.Dataset):
dat = group[key]
kn = key
if key.startswith("_list_"):
if (h5py.check_string_dtype(dat.dtype) and
hasattr(dat, 'asstr')):
# h5py 3.0 and newer
# https://docs.h5py.org/en/3.0.0/strings.html
dat = dat.asstr()[:]
ans = np.array(dat)
ans = ans.tolist()
kn = key[6:]
elif key.startswith("_tuple_"):
ans = np.array(dat)
ans = tuple(ans.tolist())
kn = key[7:]
elif dat.dtype.char == "S":
ans = np.array(dat)
try:
ans = ans.astype("U")
except UnicodeDecodeError:
# There are some strings that must stay in binary,
# for example dill pickles. This will obviously also
# let "wrong" binary string fail somewhere else...
pass
elif lazy:
ans = da.from_array(dat, chunks=dat.chunks)
else:
ans = np.array(dat)
dictionary[kn] = ans
elif key.startswith('_hspy_AxesManager_'):
dictionary[key[len('_hspy_AxesManager_'):]] = AxesManager(
[i for k, i in sorted(iter(
self._group2dict(
group[key], lazy=lazy).items()
))])
elif key.startswith('_list_'):
dictionary[key[7 + key[6:].find('_'):]] = \
[i for k, i in sorted(iter(
self._group2dict(
group[key], lazy=lazy).items()
))]
elif key.startswith('_tuple_'):
dictionary[key[8 + key[7:].find('_'):]] = tuple(
[i for k, i in sorted(iter(
self._group2dict(
group[key], lazy=lazy).items()
))])
else:
dictionary[key] = {}
self._group2dict(
group[key],
dictionary[key],
lazy=lazy)
return dictionary
def hdfgroup2dict(group, dictionary=None, load_to_memory=True):
if dictionary is None:
dictionary = {}
for key, value in group.attrs.items():
if isinstance(value, bytes):
value = value.decode()
if isinstance(value, (np.string_, str)):
if value == '_None_':
value = None
elif isinstance(value, np.bool_):
value = bool(value)
elif isinstance(value, np.ndarray) and value.dtype.char == "S":
# Convert strings to unicode
value = value.astype("U")
if value.dtype.str.endswith("U1"):
value = value.tolist()
# skip signals - these are handled below.
if key.startswith('_sig_'):
pass
elif key.startswith('_list_empty_'):
dictionary[key[len('_list_empty_'):]] = []
elif key.startswith('_tuple_empty_'):
dictionary[key[len('_tuple_empty_'):]] = ()
elif key.startswith('_bs_'):
dictionary[key[len('_bs_'):]] = value.tostring()
# The following two elif stataments enable reading date and time from
# v < 2 of HyperSpy's metadata specifications
elif key.startswith('_datetime_date'):
date_iso = datetime.date(
*ast.literal_eval(value[value.index("("):])).isoformat()
dictionary[key.replace("_datetime_", "")] = date_iso
elif key.startswith('_datetime_time'):
date_iso = datetime.time(
*ast.literal_eval(value[value.index("("):])).isoformat()
dictionary[key.replace("_datetime_", "")] = date_iso
else:
dictionary[key] = value
if not isinstance(group, h5py.Dataset):
for key in group.keys():
if key.startswith('_sig_'):
from hyperspy.io import dict2signal
dictionary[key[len('_sig_'):]] = (dict2signal(
hdfgroup2signaldict(group[key],
load_to_memory=load_to_memory)))
elif isinstance(group[key], h5py.Dataset):
ans = np.array(group[key])
if ans.dtype.char == "S":
try:
ans = ans.astype("U")
except UnicodeDecodeError:
# There are some strings that must stay in binary,
# for example dill pickles. This will obviously also
# let "wrong" binary string fail somewhere else...
pass
kn = key
if key.startswith("_list_"):
ans = ans.tolist()
kn = key[6:]
elif key.startswith("_tuple_"):
ans = tuple(ans.tolist())
kn = key[7:]
elif load_to_memory:
kn = key
else:
# leave as h5py dataset
ans = group[key]
kn = key
dictionary[kn] = ans
elif key.startswith('_hspy_AxesManager_'):
dictionary[key[len('_hspy_AxesManager_'):]] = AxesManager([
i for k, i in sorted(
iter(
hdfgroup2dict(
group[key],
load_to_memory=load_to_memory).items()))
])
elif key.startswith('_list_'):
dictionary[key[7 + key[6:].find('_'):]] = \
[i for k, i in sorted(iter(
hdfgroup2dict(
group[key], load_to_memory=load_to_memory).items()
))]
elif key.startswith('_tuple_'):
dictionary[key[8 + key[7:].find('_'):]] = tuple([
i for k, i in sorted(
iter(
hdfgroup2dict(
group[key],
load_to_memory=load_to_memory).items()))
])
else:
dictionary[key] = {}
hdfgroup2dict(group[key],
dictionary[key],
load_to_memory=load_to_memory)
return dictionary
def hdfgroup2dict(group, dictionary=None, load_to_memory=True):
if dictionary is None:
dictionary = {}
for key, value in group.attrs.items():
if isinstance(value, bytes):
value = value.decode()
if isinstance(value, (np.string_, str)):
if value == '_None_':
value = None
elif isinstance(value, np.bool_):
value = bool(value)
elif isinstance(value, np.ndarray) and value.dtype.char == "S":
# Convert strings to unicode
value = value.astype("U")
if value.dtype.str.endswith("U1"):
value = value.tolist()
# skip signals - these are handled below.
if key.startswith('_sig_'):
pass
elif key.startswith('_list_empty_'):
dictionary[key[len('_list_empty_'):]] = []
elif key.startswith('_tuple_empty_'):
dictionary[key[len('_tuple_empty_'):]] = ()
elif key.startswith('_bs_'):
dictionary[key[len('_bs_'):]] = value.tostring()
# The following is commented out as it could be used to evaluate
# arbitrary code i.e. it was a security flaw. We should instead
# use a standard string for date and time.
# elif key.startswith('_datetime_'):
# dictionary[key.replace("_datetime_", "")] = eval(value)
else:
dictionary[key] = value
if not isinstance(group, h5py.Dataset):
for key in group.keys():
if key.startswith('_sig_'):
from hyperspy.io import dict2signal
dictionary[key[len('_sig_'):]] = (
dict2signal(hdfgroup2signaldict(
group[key], load_to_memory=load_to_memory)))
elif isinstance(group[key], h5py.Dataset):
ans = np.array(group[key])
if ans.dtype.char == "S":
try:
ans = ans.astype("U")
except UnicodeDecodeError:
# There are some strings that must stay in binary,
# for example dill pickles. This will obviously also
# let "wrong" binary string fail somewhere else...
pass
kn = key
if key.startswith("_list_"):
ans = ans.tolist()
kn = key[6:]
elif key.startswith("_tuple_"):
ans = tuple(ans.tolist())
kn = key[7:]
elif load_to_memory:
kn = key
else:
# leave as h5py dataset
ans = group[key]
kn = key
dictionary[kn] = ans
elif key.startswith('_hspy_AxesManager_'):
dictionary[key[len('_hspy_AxesManager_'):]] = AxesManager(
[i for k, i in sorted(iter(
hdfgroup2dict(
group[key], load_to_memory=load_to_memory).items()
))])
elif key.startswith('_list_'):
dictionary[key[7 + key[6:].find('_'):]] = \
[i for k, i in sorted(iter(
hdfgroup2dict(
group[key], load_to_memory=load_to_memory).items()
))]
elif key.startswith('_tuple_'):
dictionary[key[8 + key[7:].find('_'):]] = tuple(
[i for k, i in sorted(iter(
hdfgroup2dict(
group[key], load_to_memory=load_to_memory).items()
))])
else:
dictionary[key] = {}
hdfgroup2dict(
group[key],
dictionary[key],
load_to_memory=load_to_memory)
return dictionary
class TestAxesManager:
def setup_method(self, method):
self.axes_list = [{
'name': 'x',
'navigate': True,
'offset': 0.0,
'scale': 1.5E-9,
'size': 1024,
'units': 'm'
}, {
'name': 'y',
'navigate': True,
'offset': 0.0,
'scale': 0.5E-9,
'size': 1024,
'units': 'm'
}, {
'name': 'energy',
'navigate': False,
'offset': 0.0,
'scale': 5.0,
'size': 4096,
'units': 'eV'
}]
self.am = AxesManager(self.axes_list)
self.axes_list2 = [{
'name': 'x',
'navigate': True,
'offset': 0.0,
'scale': 1.5E-9,
'size': 1024,
'units': 'm'
}, {
'name': 'energy',
'navigate': False,
'offset': 0.0,
'scale': 2.5,
'size': 4096,
'units': 'eV'
}, {
'name': 'energy2',
'navigate': False,
'offset': 0.0,
'scale': 5.0,
'size': 4096,
'units': 'eV'
}]
self.am2 = AxesManager(self.axes_list2)
def test_compact_unit(self):
self.am.convert_units()
assert self.am['x'].units == 'nm'
nt.assert_almost_equal(self.am['x'].scale, 1.5)
assert self.am['y'].units == 'nm'
nt.assert_almost_equal(self.am['y'].scale, 0.5)
assert self.am['energy'].units == 'keV'
nt.assert_almost_equal(self.am['energy'].scale, 0.005)
def test_convert_to_navigation_units(self):
self.am.convert_units(axes='navigation', units='mm')
nt.assert_almost_equal(self.am['x'].scale, 1.5E-6)
assert self.am['x'].units == 'mm'
nt.assert_almost_equal(self.am['y'].scale, 0.5E-6)
assert self.am['y'].units == 'mm'
nt.assert_almost_equal(self.am['energy'].scale,
self.axes_list[-1]['scale'])
def test_convert_units_axes_integer(self):
# convert only the first axis
self.am.convert_units(axes=0, units='nm', same_units=False)
nt.assert_almost_equal(self.am[0].scale, 0.5)
assert self.am[0].units == 'nm'
nt.assert_almost_equal(self.am['x'].scale, 1.5E-9)
assert self.am['x'].units == 'm'
nt.assert_almost_equal(self.am['energy'].scale,
self.axes_list[-1]['scale'])
self.am.convert_units(axes=0, units='nm', same_units=True)
nt.assert_almost_equal(self.am[0].scale, 0.5)
assert self.am[0].units == 'nm'
nt.assert_almost_equal(self.am['x'].scale, 1.5)
assert self.am['x'].units == 'nm'
def test_convert_to_navigation_units_list(self):
self.am.convert_units(axes='navigation',
units=['mm', 'nm'],
same_units=False)
nt.assert_almost_equal(self.am['x'].scale, 1.5)
assert self.am['x'].units == 'nm'
nt.assert_almost_equal(self.am['y'].scale, 0.5E-6)
assert self.am['y'].units == 'mm'
nt.assert_almost_equal(self.am['energy'].scale,
self.axes_list[-1]['scale'])
def test_convert_to_navigation_units_list_same_units(self):
self.am.convert_units(axes='navigation',
units=['mm', 'nm'],
same_units=True)
assert self.am['x'].units == 'mm'
nt.assert_almost_equal(self.am['x'].scale, 1.5e-6)
assert self.am['y'].units == 'mm'
nt.assert_almost_equal(self.am['y'].scale, 0.5e-6)
assert self.am['energy'].units == 'eV'
nt.assert_almost_equal(self.am['energy'].scale, 5)
def test_convert_to_navigation_units_different(self):
# Don't convert the units since the units of the navigation axes are
# different
self.axes_list.insert(
0, {
'name': 'time',
'navigate': True,
'offset': 0.0,
'scale': 1.5,
'size': 20,
'units': 's'
})
am = AxesManager(self.axes_list)
am.convert_units(axes='navigation', same_units=True)
assert am['time'].units == 's'
nt.assert_almost_equal(am['time'].scale, 1.5)
assert am['x'].units == 'nm'
nt.assert_almost_equal(am['x'].scale, 1.5)
assert am['y'].units == 'nm'
nt.assert_almost_equal(am['y'].scale, 0.5)
assert am['energy'].units == 'eV'
nt.assert_almost_equal(am['energy'].scale, 5)
def test_convert_to_navigation_units_Undefined(self):
self.axes_list[0]['units'] = t.Undefined
am = AxesManager(self.axes_list)
am.convert_units(axes='navigation', same_units=True)
assert am['x'].units == t.Undefined
nt.assert_almost_equal(am['x'].scale, 1.5E-9)
assert am['y'].units == 'm'
nt.assert_almost_equal(am['y'].scale, 0.5E-9)
assert am['energy'].units == 'eV'
nt.assert_almost_equal(am['energy'].scale, 5)
def test_convert_to_signal_units(self):
self.am.convert_units(axes='signal', units='keV')
nt.assert_almost_equal(self.am['x'].scale, self.axes_list[0]['scale'])
assert self.am['x'].units == self.axes_list[0]['units']
nt.assert_almost_equal(self.am['y'].scale, self.axes_list[1]['scale'])
assert self.am['y'].units == self.axes_list[1]['units']
nt.assert_almost_equal(self.am['energy'].scale, 0.005)
assert self.am['energy'].units == 'keV'
def test_convert_to_units_list(self):
self.am.convert_units(units=['µm', 'nm', 'meV'], same_units=False)
nt.assert_almost_equal(self.am['x'].scale, 1.5)
assert self.am['x'].units == 'nm'
nt.assert_almost_equal(self.am['y'].scale, 0.5E-3)
assert self.am['y'].units == 'um'
nt.assert_almost_equal(self.am['energy'].scale, 5E3)
assert self.am['energy'].units == 'meV'
def test_convert_to_units_list_same_units(self):
self.am2.convert_units(units=['µm', 'eV', 'meV'], same_units=True)
nt.assert_almost_equal(self.am2['x'].scale, 0.0015)
assert self.am2['x'].units == 'um'
nt.assert_almost_equal(self.am2['energy'].scale,
self.axes_list2[1]['scale'])
assert self.am2['energy'].units == self.axes_list2[1]['units']
nt.assert_almost_equal(self.am2['energy2'].scale,
self.axes_list2[2]['scale'])
assert self.am2['energy2'].units == self.axes_list2[2]['units']
def test_convert_to_units_list_signal2D(self):
self.am2.convert_units(units=['µm', 'eV', 'meV'], same_units=False)
nt.assert_almost_equal(self.am2['x'].scale, 0.0015)
assert self.am2['x'].units == 'um'
nt.assert_almost_equal(self.am2['energy'].scale, 2500)
assert self.am2['energy'].units == 'meV'
nt.assert_almost_equal(self.am2['energy2'].scale, 5.0)
assert self.am2['energy2'].units == 'eV'
@pytest.mark.parametrize("same_units", (True, False))
def test_convert_to_units_unsupported_units(self, same_units):
with assert_warns(message="not supported for conversion.",
category=UserWarning):
self.am.convert_units('navigation',
units='toto',
same_units=same_units)
assert_deep_almost_equal(self.am._get_axes_dicts(), self.axes_list)
class Signal(t.HasTraits, MVA):
data = t.Any()
axes_manager = t.Instance(AxesManager)
original_parameters = t.Instance(Parameters)
mapped_parameters = t.Instance(Parameters)
physical_property = t.Str()
def __init__(self, file_data_dict=None, *args, **kw):
"""All data interaction is made through this class or its subclasses
Parameters:
-----------
dictionary : dictionary
see load_dictionary for the format
"""
super(Signal, self).__init__()
self.mapped_parameters = Parameters()
self.original_parameters = Parameters()
if type(file_data_dict).__name__ == "dict":
self.load_dictionary(file_data_dict)
self._plot = None
self.mva_results = MVA_Results()
self._shape_before_unfolding = None
self._axes_manager_before_unfolding = None
def load_dictionary(self, file_data_dict):
"""Parameters:
-----------
file_data_dict : dictionary
A dictionary containing at least a 'data' keyword with an array of
arbitrary dimensions. Additionally the dictionary can contain the
following keys:
axes: a dictionary that defines the axes (see the
AxesManager class)
attributes: a dictionary which keywords are stored as
attributes of the signal class
mapped_parameters: a dictionary containing a set of parameters
that will be stored as attributes of a Parameters class.
For some subclasses some particular parameters might be
mandatory.
original_parameters: a dictionary that will be accesible in the
original_parameters attribute of the signal class and that
typically contains all the parameters that has been
imported from the original data file.
"""
self.data = file_data_dict['data']
if 'axes' not in file_data_dict:
file_data_dict['axes'] = self._get_undefined_axes_list()
self.axes_manager = AxesManager(file_data_dict['axes'])
if not 'mapped_parameters' in file_data_dict:
file_data_dict['mapped_parameters'] = {}
if not 'original_parameters' in file_data_dict:
file_data_dict['original_parameters'] = {}
if 'attributes' in file_data_dict:
for key, value in file_data_dict['attributes'].iteritems():
self.__setattr__(key, value)
self.original_parameters.load_dictionary(
file_data_dict['original_parameters'])
self.mapped_parameters.load_dictionary(
file_data_dict['mapped_parameters'])
def _get_signal_dict(self):
dic = {}
dic['data'] = self.data.copy()
dic['axes'] = self.axes_manager._get_axes_dicts()
dic['mapped_parameters'] = \
self.mapped_parameters._get_parameters_dictionary()
dic['original_parameters'] = \
self.original_parameters._get_parameters_dictionary()
return dic
def _get_undefined_axes_list(self):
axes = []
for i in xrange(len(self.data.shape)):
axes.append({
'name': 'undefined',
'scale': 1.,
'offset': 0.,
'size': int(self.data.shape[i]),
'units': 'undefined',
'index_in_array': i,
})
return axes
def __call__(self, axes_manager=None):
if axes_manager is None:
axes_manager = self.axes_manager
return self.data.__getitem__(axes_manager._getitem_tuple)
def _get_hse_1D_explorer(self, *args, **kwargs):
islice = self.axes_manager._slicing_axes[0].index_in_array
inslice = self.axes_manager._non_slicing_axes[0].index_in_array
if islice > inslice:
return self.data.squeeze()
else:
return self.data.squeeze().T
def _get_hse_2D_explorer(self, *args, **kwargs):
islice = self.axes_manager._slicing_axes[0].index_in_array
data = self.data.sum(islice)
return data
def _get_hie_explorer(self, *args, **kwargs):
isslice = [
self.axes_manager._slicing_axes[0].index_in_array,
self.axes_manager._slicing_axes[1].index_in_array
]
isslice.sort()
data = self.data.sum(isslice[1]).sum(isslice[0])
return data
def _get_explorer(self, *args, **kwargs):
nav_dim = self.axes_manager.navigation_dimension
if self.axes_manager.signal_dimension == 1:
if nav_dim == 1:
return self._get_hse_1D_explorer(*args, **kwargs)
elif nav_dim == 2:
return self._get_hse_2D_explorer(*args, **kwargs)
else:
return None
if self.axes_manager.signal_dimension == 2:
if nav_dim == 1 or nav_dim == 2:
return self._get_hie_explorer(*args, **kwargs)
else:
return None
else:
return None
def plot(self, axes_manager=None):
if self._plot is not None:
try:
self._plot.close()
except:
# If it was already closed it will raise an exception,
# but we want to carry on...
pass
if axes_manager is None:
axes_manager = self.axes_manager
if axes_manager.signal_dimension == 1:
# Hyperspectrum
self._plot = mpl_hse.MPL_HyperSpectrum_Explorer()
self._plot.spectrum_data_function = self.__call__
self._plot.spectrum_title = self.mapped_parameters.name
self._plot.xlabel = '%s (%s)' % (
self.axes_manager._slicing_axes[0].name,
self.axes_manager._slicing_axes[0].units)
self._plot.ylabel = 'Intensity'
self._plot.axes_manager = axes_manager
self._plot.axis = self.axes_manager._slicing_axes[0].axis
# Image properties
if self.axes_manager._non_slicing_axes:
self._plot.image_data_function = self._get_explorer
self._plot.image_title = ''
self._plot.pixel_size = \
self.axes_manager._non_slicing_axes[0].scale
self._plot.pixel_units = \
self.axes_manager._non_slicing_axes[0].units
self._plot.plot()
elif axes_manager.signal_dimension == 2:
# Mike's playground with new plotting toolkits - needs to be a
# branch.
"""
if len(self.data.shape)==2:
from drawing.guiqwt_hie import image_plot_2D
image_plot_2D(self)
import drawing.chaco_hie
self._plot = drawing.chaco_hie.Chaco_HyperImage_Explorer(self)
self._plot.configure_traits()
"""
self._plot = mpl_hie.MPL_HyperImage_Explorer()
self._plot.image_data_function = self.__call__
self._plot.navigator_data_function = self._get_explorer
self._plot.axes_manager = axes_manager
self._plot.plot()
else:
messages.warning_exit('Plotting is not supported for this view')
traits_view = tui.View(
tui.Item('name'),
tui.Item('physical_property'),
tui.Item('units'),
tui.Item('offset'),
tui.Item('scale'),
)
def plot_residual(self, axes_manager=None):
"""Plot the residual between original data and reconstructed data
Requires you to have already run PCA or ICA, and to reconstruct data
using either the pca_build_SI or ica_build_SI methods.
"""
if hasattr(self, 'residual'):
self.residual.plot(axes_manager)
else:
print "Object does not have any residual information. Is it a \
reconstruction created using either pca_build_SI or ica_build_SI methods?"
def save(self, filename, only_view=False, **kwds):
"""Saves the signal in the specified format.
The function gets the format from the extension. You can use:
- hdf5 for HDF5
- nc for NetCDF
- msa for EMSA/MSA single spectrum saving.
- bin to produce a raw binary file
- Many image formats such as png, tiff, jpeg...
Please note that not all the formats supports saving datasets of
arbitrary dimensions, e.g. msa only suports 1D data.
Parameters
----------
filename : str
msa_format : {'Y', 'XY'}
'Y' will produce a file without the energy axis. 'XY' will also
save another column with the energy axis. For compatibility with
Gatan Digital Micrograph 'Y' is the default.
only_view : bool
If True, only the current view will be saved. Otherwise the full
dataset is saved. Please note that not all the formats support this
option at the moment.
"""
io.save(filename, self, **kwds)
def _replot(self):
if self._plot is not None:
if self._plot.is_active() is True:
self.plot()
def get_dimensions_from_data(self):
"""Get the dimension parameters from the data_cube. Useful when the
data_cube was externally modified, or when the SI was not loaded from
a file
"""
dc = self.data
for axis in self.axes_manager.axes:
axis.size = int(dc.shape[axis.index_in_array])
print("%s size: %i" % (axis.name, dc.shape[axis.index_in_array]))
self._replot()
def crop_in_pixels(self, axis, i1=None, i2=None):
"""Crops the data in a given axis. The range is given in pixels
axis : int
i1 : int
Start index
i2 : int
End index
See also:
---------
crop_in_units
"""
axis = self._get_positive_axis_index_index(axis)
if i1 is not None:
new_offset = self.axes_manager.axes[axis].axis[i1]
# We take a copy to guarantee the continuity of the data
self.data = self.data[(slice(None), ) * axis +
(slice(i1, i2), Ellipsis)].copy()
if i1 is not None:
self.axes_manager.axes[axis].offset = new_offset
self.get_dimensions_from_data()
def crop_in_units(self, axis, x1=None, x2=None):
"""Crops the data in a given axis. The range is given in the units of
the axis
axis : int
i1 : int
Start index
i2 : int
End index
See also:
---------
crop_in_pixels
"""
i1 = self.axes_manager.axes[axis].value2index(x1)
i2 = self.axes_manager.axes[axis].value2index(x2)
self.crop_in_pixels(axis, i1, i2)
def roll_xy(self, n_x, n_y=1):
"""Roll over the x axis n_x positions and n_y positions the former rows
This method has the purpose of "fixing" a bug in the acquisition of the
Orsay's microscopes and probably it does not have general interest
Parameters
----------
n_x : int
n_y : int
Note: Useful to correct the SI column storing bug in Marcel's
acquisition routines.
"""
self.data = np.roll(self.data, n_x, 0)
self.data[:n_x, ...] = np.roll(self.data[:n_x, ...], n_y, 1)
self._replot()
# TODO: After using this function the plotting does not work
def swap_axis(self, axis1, axis2):
"""Swaps the axes
Parameters
----------
axis1 : positive int
axis2 : positive int
"""
self.data = self.data.swapaxes(axis1, axis2)
c1 = self.axes_manager.axes[axis1]
c2 = self.axes_manager.axes[axis2]
c1.index_in_array, c2.index_in_array = \
c2.index_in_array, c1.index_in_array
self.axes_manager.axes[axis1] = c2
self.axes_manager.axes[axis2] = c1
self.axes_manager.set_signal_dimension()
self._replot()
def rebin(self, new_shape):
"""
Rebins the data to the new shape
Parameters
----------
new_shape: tuple of ints
The new shape must be a divisor of the original shape
"""
factors = np.array(self.data.shape) / np.array(new_shape)
self.data = utils.rebin(self.data, new_shape)
for axis in self.axes_manager.axes:
axis.scale *= factors[axis.index_in_array]
self.get_dimensions_from_data()
def split_in(self, axis, number_of_parts=None, steps=None):
"""Splits the data
The split can be defined either by the `number_of_parts` or by the
`steps` size.
Parameters
----------
number_of_parts : int or None
Number of parts in which the SI will be splitted
steps : int or None
Size of the splitted parts
axis : int
The splitting axis
Return
------
tuple with the splitted signals
"""
axis = self._get_positive_axis_index_index(axis)
if number_of_parts is None and steps is None:
if not self._splitting_steps:
messages.warning_exit(
"Please provide either number_of_parts or a steps list")
else:
steps = self._splitting_steps
print "Splitting in ", steps
elif number_of_parts is not None and steps is not None:
print "Using the given steps list. number_of_parts dimissed"
splitted = []
shape = self.data.shape
if steps is None:
rounded = (shape[axis] - (shape[axis] % number_of_parts))
step = rounded / number_of_parts
cut_node = range(0, rounded + step, step)
else:
cut_node = np.array([0] + steps).cumsum()
for i in xrange(len(cut_node) - 1):
data = self.data[(slice(None), ) * axis +
(slice(cut_node[i], cut_node[i + 1]), Ellipsis)]
s = Signal({'data': data})
# TODO: When copying plotting does not work
# s.axes = copy.deepcopy(self.axes_manager)
s.get_dimensions_from_data()
splitted.append(s)
return splitted
def unfold_if_multidim(self):
"""Unfold the datacube if it is >2D
Returns
-------
Boolean. True if the data was unfolded by the function.
"""
if len(self.axes_manager.axes) > 2:
print "Automatically unfolding the data"
self.unfold()
return True
else:
return False
def _unfold(self, steady_axes, unfolded_axis):
"""Modify the shape of the data by specifying the axes the axes which
dimension do not change and the axis over which the remaining axes will
be unfolded
Parameters
----------
steady_axes : list
The indexes of the axes which dimensions do not change
unfolded_axis : int
The index of the axis over which all the rest of the axes (except
the steady axes) will be unfolded
See also
--------
fold
"""
# It doesn't make sense unfolding when dim < 3
if len(self.data.squeeze().shape) < 3:
return False
# We need to store the original shape and coordinates to be used by
# the fold function only if it has not been already stored by a
# previous unfold
if self._shape_before_unfolding is None:
self._shape_before_unfolding = self.data.shape
self._axes_manager_before_unfolding = self.axes_manager
new_shape = [1] * len(self.data.shape)
for index in steady_axes:
new_shape[index] = self.data.shape[index]
new_shape[unfolded_axis] = -1
self.data = self.data.reshape(new_shape)
self.axes_manager = self.axes_manager.deepcopy()
i = 0
uname = ''
uunits = ''
to_remove = []
for axis, dim in zip(self.axes_manager.axes, new_shape):
if dim == 1:
uname += ',' + axis.name
uunits = ',' + axis.units
to_remove.append(axis)
else:
axis.index_in_array = i
i += 1
self.axes_manager.axes[unfolded_axis].name += uname
self.axes_manager.axes[unfolded_axis].units += uunits
self.axes_manager.axes[unfolded_axis].size = \
self.data.shape[unfolded_axis]
for axis in to_remove:
self.axes_manager.axes.remove(axis)
self.data = self.data.squeeze()
self._replot()
def unfold(self):
"""Modifies the shape of the data by unfolding the signal and
navigation dimensions separaterly
"""
self.unfold_navigation_space()
self.unfold_signal_space()
def unfold_navigation_space(self):
"""Modify the shape of the data to obtain a navigation space of
dimension 1
"""
if self.axes_manager.navigation_dimension < 2:
messages.information('Nothing done, the navigation dimension was '
'already 1')
return False
steady_axes = [
axis.index_in_array for axis in self.axes_manager._slicing_axes
]
unfolded_axis = self.axes_manager._non_slicing_axes[-1].index_in_array
self._unfold(steady_axes, unfolded_axis)
def unfold_signal_space(self):
"""Modify the shape of the data to obtain a signal space of
dimension 1
"""
if self.axes_manager.signal_dimension < 2:
messages.information('Nothing done, the signal dimension was '
'already 1')
return False
steady_axes = [
axis.index_in_array for axis in self.axes_manager._non_slicing_axes
]
unfolded_axis = self.axes_manager._slicing_axes[-1].index_in_array
self._unfold(steady_axes, unfolded_axis)
def fold(self):
"""If the signal was previously unfolded, folds it back"""
if self._shape_before_unfolding is not None:
self.data = self.data.reshape(self._shape_before_unfolding)
self.axes_manager = self._axes_manager_before_unfolding
self._shape_before_unfolding = None
self._axes_manager_before_unfolding = None
self._replot()
def _get_positive_axis_index_index(self, axis):
if axis < 0:
axis = len(self.data.shape) + axis
return axis
def iterate_axis(self, axis=-1):
# We make a copy to guarantee that the data in contiguous, otherwise
# it will not return a view of the data
self.data = self.data.copy()
axis = self._get_positive_axis_index_index(axis)
unfolded_axis = axis - 1
new_shape = [1] * len(self.data.shape)
new_shape[axis] = self.data.shape[axis]
new_shape[unfolded_axis] = -1
# Warning! if the data is not contigous it will make a copy!!
data = self.data.reshape(new_shape)
for i in xrange(data.shape[unfolded_axis]):
getitem = [0] * len(data.shape)
getitem[axis] = slice(None)
getitem[unfolded_axis] = i
yield (data[getitem])
def sum(self, axis, return_signal=False):
"""Sum the data over the specify axis
Parameters
----------
axis : int
The axis over which the operation will be performed
return_signal : bool
If False the operation will be performed on the current object. If
True, the current object will not be modified and the operation
will be performed in a new signal object that will be returned.
Returns
-------
Depending on the value of the return_signal keyword, nothing or a
signal instance
See also
--------
sum_in_mask, mean
Usage
-----
>>> import numpy as np
>>> s = Signal({'data' : np.random.random((64,64,1024))})
>>> s.data.shape
(64,64,1024)
>>> s.sum(-1)
>>> s.data.shape
(64,64)
# If we just want to plot the result of the operation
s.sum(-1, True).plot()
"""
if return_signal is True:
s = self.deepcopy()
else:
s = self
s.data = s.data.sum(axis)
s.axes_manager.axes.remove(s.axes_manager.axes[axis])
for _axis in s.axes_manager.axes:
if _axis.index_in_array > axis:
_axis.index_in_array -= 1
s.axes_manager.set_signal_dimension()
if return_signal is True:
return s
def mean(self, axis, return_signal=False):
"""Average the data over the specify axis
Parameters
----------
axis : int
The axis over which the operation will be performed
return_signal : bool
If False the operation will be performed on the current object. If
True, the current object will not be modified and the operation
will be performed in a new signal object that will be returned.
Returns
-------
Depending on the value of the return_signal keyword, nothing or a
signal instance
See also
--------
sum_in_mask, mean
Usage
-----
>>> import numpy as np
>>> s = Signal({'data' : np.random.random((64,64,1024))})
>>> s.data.shape
(64,64,1024)
>>> s.mean(-1)
>>> s.data.shape
(64,64)
# If we just want to plot the result of the operation
s.mean(-1, True).plot()
"""
if return_signal is True:
s = self.deepcopy()
else:
s = self
s.data = s.data.mean(axis)
s.axes_manager.axes.remove(s.axes_manager.axes[axis])
for _axis in s.axes_manager.axes:
if _axis.index_in_array > axis:
_axis.index_in_array -= 1
s.axes_manager.set_signal_dimension()
if return_signal is True:
return s
def copy(self):
return (copy.copy(self))
def deepcopy(self):
return (copy.deepcopy(self))
# def sum_in_mask(self, mask):
# """Returns the result of summing all the spectra in the mask.
#
# Parameters
# ----------
# mask : boolean numpy array
#
# Returns
# -------
# Spectrum
# """
# dc = self.data_cube.copy()
# mask3D = mask.reshape([1,] + list(mask.shape)) * np.ones(dc.shape)
# dc = (mask3D*dc).sum(1).sum(1) / mask.sum()
# s = Spectrum()
# s.data_cube = dc.reshape((-1,1,1))
# s.get_dimensions_from_cube()
# utils.copy_energy_calibration(self,s)
# return s
#
# def mean(self, axis):
# """Average the SI over the given axis
#
# Parameters
# ----------
# axis : int
# """
# dc = self.data_cube
# dc = dc.mean(axis)
# dc = dc.reshape(list(dc.shape) + [1,])
# self.data_cube = dc
# self.get_dimensions_from_cube()
#
# def roll(self, axis = 2, shift = 1):
# """Roll the SI. see numpy.roll
#
# Parameters
# ----------
# axis : int
# shift : int
# """
# self.data_cube = np.roll(self.data_cube, shift, axis)
# self._replot()
#
#
# def get_calibration_from(self, s):
# """Copy the calibration from another Spectrum instance
# Parameters
# ----------
# s : spectrum instance
# """
# utils.copy_energy_calibration(s, self)
#
# def estimate_variance(self, dc = None, gaussian_noise_var = None):
# """Variance estimation supposing Poissonian noise
#
# Parameters
# ----------
# dc : None or numpy array
# If None the SI is used to estimate its variance. Otherwise, the
# provided array will be used.
# Note
# ----
# The gain_factor and gain_offset from the aquisition parameters are used
# """
# print "Variace estimation using the following values:"
# print "Gain factor = ", self.acquisition_parameters.gain_factor
# print "Gain offset = ", self.acquisition_parameters.gain_offset
# if dc is None:
# dc = self.data_cube
# gain_factor = self.acquisition_parameters.gain_factor
# gain_offset = self.acquisition_parameters.gain_offset
# self.variance = dc*gain_factor + gain_offset
# if self.variance.min() < 0:
# if gain_offset == 0 and gaussian_noise_var is None:
# print "The variance estimation results in negative values"
# print "Maybe the gain_offset is wrong?"
# self.variance = None
# return
# elif gaussian_noise_var is None:
# print "Clipping the variance to the gain_offset value"
# self.variance = np.clip(self.variance, np.abs(gain_offset),
# np.Inf)
# else:
# print "Clipping the variance to the gaussian_noise_var"
# self.variance = np.clip(self.variance, gaussian_noise_var,
# np.Inf)
#
# def calibrate(self, lcE = 642.6, rcE = 849.7, lc = 161.9, rc = 1137.6,
# modify_calibration = True):
# dispersion = (rcE - lcE) / (rc - lc)
# origin = lcE - dispersion * lc
# print "Energy step = ", dispersion
# print "Energy origin = ", origin
# if modify_calibration is True:
# self.set_new_calibration(origin, dispersion)
# return origin, dispersion
#
def _correct_navigation_mask_when_unfolded(
self,
navigation_mask=None,
):
#if 'unfolded' in self.history:
if navigation_mask is not None:
navigation_mask = navigation_mask.reshape((-1, ))
return navigation_mask
