def bench_rle_conversion():
width = 6
constants = Constants(width_addr=width, width_data=12,
max_write_cnt=63, rlength=4,
size=width.bit_length())
clock = Signal(bool(0))
reset = ResetSignal(0, active=1, async=True)
indatastream = InDataStream(constants.width_data)
bufferdatabus = BufferDataBus(
constants.width_data, constants.size, constants.rlength)
rleconfig = RLEConfig(constants.max_write_cnt.bit_length())
width_dbuf = constants.width_data + constants.size + constants.rlength
dfifo_const = Constants(width=width_dbuf, depth=constants.max_write_cnt + 1)
inst = rlencoder(
dfifo_const, constants, reset, clock,
indatastream, bufferdatabus, rleconfig)
inst_clock = clock_driver(clock)
inst_reset = reset_on_start(reset, clock)
@instance
def tbstim():
yield clock.posedge
print("Conversion done!!")
raise StopSimulation
return tbstim, inst, inst_clock, inst_reset
def bench_rle_conversion():
"""This bench is meant for conversion purpose"""
# clock and reset signals
clock = Signal(bool(0))
reset = ResetSignal(0, active=1, async=True)
# width of input data
width_data = 12
# width of address bus
width_addr = 6
# width to store the size
width_size = width_data.bit_length()
width_runlength = 4
# input data bus for rle module
datastream = DataStream(width_data, width_addr)
assert isinstance(datastream, DataStream)
# connections between output symbols
bufferdatabus = BufferDataBus(width_data, width_size, width_runlength)
assert isinstance(bufferdatabus, BufferDataBus)
# selects the color component, manages address values
rleconfig = RLEConfig()
assert isinstance(rleconfig, RLEConfig)
inst = rlencoder(clock, reset, datastream, bufferdatabus, rleconfig)
inst_clock = clock_driver(clock)
inst_reset = reset_on_start(reset, clock)
@instance
def tbstim():
"""testbench for conversion purpose"""
yield clock.posedge
print("Conversion done!!")
raise StopSimulation
return tbstim, inst, inst_clock, inst_reset
def bench_rle_conversion():
"""This bench is meant for conversion purpose"""
# clock and reset signals
clock = Signal(bool(0))
reset = ResetSignal(0, active=1, async=True)
# width of input data
width_data = 12
# width of address bus
width_addr = 6
# width to store the size
width_size = width_data.bit_length()
width_runlength = 4
# input data bus for rle module
datastream = DataStream(width_data, width_addr)
assert isinstance(datastream, DataStream)
# connections between output symbols
bufferdatabus = BufferDataBus(width_data, width_size, width_runlength)
assert isinstance(bufferdatabus, BufferDataBus)
# selects the color component, manages address values
rleconfig = RLEConfig()
assert isinstance(rleconfig, RLEConfig)
inst = rlencoder(clock, reset, datastream, bufferdatabus, rleconfig)
inst_clock = clock_driver(clock)
inst_reset = reset_on_start(reset, clock)
@instance
def tbstim():
"""testbench for conversion purpose"""
yield clock.posedge
print("Conversion done!!")
raise StopSimulation
return tbstim, inst, inst_clock, inst_reset
def backend(clock, reset, start, data_in, write_addr,
write_enable, data_out, ready, addr, num_enc_bytes):
"""
Constants:
width_data : width of the input data
width_addr : width of the address accessed by a module
width_runlength : width of the runlength value
width_size : width of the size value
width_out_byte : width of output byte
width_num_bytes : max encoded bytes width
"""
width_data = len(data_in)
width_addr = len(write_addr)
width_num_bytes = len(num_enc_bytes)
width_runlength = 4
width_byte = 8
width_size = width_data.bit_length()
# used by quantizer to read data from input DRAM
read_addr = Signal(intbv(0)[width_addr:])
# output from the input DRAM
data_in_quantiser = Signal(intbv(0)[width_data:])
# quantizer data and control streams
quanti_datastream = QuantIODataStream(width_data, width_addr-1)
quanto_datastream = QuantIODataStream(width_data, width_addr-1)
quant_ctrl = QuantCtrl()
# rle data and control streams
rle_input_datastream = DataStream(width_data, width_addr-1)
rle_outputs = BufferDataBus(width_data, width_size, width_runlength)
rle_config = RLEConfig()
huffmandatastream = HuffmanDataStream(width_runlength, width_size,
width_data, width_addr-1)
bufferdatabus = HuffBufferDataBus(width_byte)
huffmancntrl = HuffmanCntrl()
img_size = ImgSize(100, 100)
rle_fifo_empty = Signal(bool(0))
bs_in_stream = BSInputDataStream(width_byte)
bs_out_stream = BSOutputDataStream(width_byte, width_num_bytes)
bs_cntrl = BScntrl()
ready_rle = Signal(bool(0))
ready_huffman = Signal(bool(0))
# control signals
wait = Signal(intbv(0)[3:])
enable_huff_read = Signal(bool(0))
counter = Signal(intbv(0)[3:])
value = Signal(intbv(4)[4:])
ready_quant = Signal(bool(0))
ready_bytestuffer = Signal(bool(0))
enable_huff_read_s = Signal(bool(0))
# instantiation of DRAM
inst_dbuf = dram(clock, data_in, write_addr, read_addr,
write_enable, data_in_quantiser)
@always_seq(clock.posedge, reset=reset)
def control_ready_valid():
"""control flow that operated between blocks"""
# initially when the first block enters
if wait == 0:
if start:
quant_ctrl.start.next = True
quant_ctrl.color_component.next = 1
else:
quant_ctrl.start.next = False
if quant_ctrl.ready:
ready.next = True
wait.next = 1
# when both rle and quantizer are ready
elif wait == 1:
ready.next = False
if start:
rle_config.start.next = True
quant_ctrl.start.next = True
quant_ctrl.color_component.next = 2
rle_config.color_component.next = 1
else:
rle_config.start.next = False
quant_ctrl.start.next = False
if quant_ctrl.ready:
ready_quant.next = True
if rle_config.ready:
ready_rle.next = True
if ready_quant and ready_rle:
ready.next = True
ready_rle.next = False
ready_quant.next = False
wait.next = 2
# when quantizer, rle and huffman are ready
elif wait == 2:
ready.next = False
if start:
rle_config.start.next = True
quant_ctrl.start.next = True
huffmancntrl.start.next = True
huffmancntrl.color_component.next = 1
rle_config.color_component.next = 2
quant_ctrl.color_component.next = 3
else:
rle_config.start.next = False
quant_ctrl.start.next = False
huffmancntrl.start.next = False
if quant_ctrl.ready:
ready_quant.next = True
if rle_config.ready:
ready_rle.next = True
if huffmancntrl.ready:
ready_huffman.next = True
if ready_quant and ready_rle and ready_huffman:
ready.next = True
ready_rle.next = False
ready_quant.next = False
ready_huffman.next = False
wait.next = 3
# when all the four blocks are ready
elif wait == 3:
ready.next = False
if start:
rle_config.start.next = True
quant_ctrl.start.next = True
huffmancntrl.start.next = True
bs_cntrl.start.next = True
if huffmancntrl.color_component == 3:
huffmancntrl.color_component.next = 1
if quant_ctrl.color_component == 3:
quant_ctrl.color_component.next = 1
if rle_config.color_component == 3:
rle_config.color_component.next = 1
else:
huffmancntrl.color_component.next = (
huffmancntrl.color_component + 1)
rle_config.color_component.next = (
rle_config.color_component + 1)
quant_ctrl.color_component.next = (
quant_ctrl.color_component + 1)
else:
rle_config.start.next = False
quant_ctrl.start.next = False
huffmancntrl.start.next = False
bs_cntrl.start.next = False
if quant_ctrl.ready:
ready_quant.next = True
if rle_config.ready:
ready_rle.next = True
if huffmancntrl.ready:
ready_huffman.next = True
if bs_cntrl.ready:
ready_bytestuffer.next = True
if (ready_quant and ready_rle) and (
ready_huffman and ready_bytestuffer):
ready.next = True
ready_rle.next = False
ready_quant.next = False
ready_huffman.next = False
ready_bytestuffer.next = False
wait.next = 3
@always_comb
def assign_quant_in():
"""quantizer and DRAM connections"""
quanti_datastream.data.next = data_in_quantiser
read_addr.next = concat(quanti_datastream.buffer_sel,
quanti_datastream.addr.next)
# instantiation of quantizer module
inst_quant = quantizer(clock, reset, quanti_datastream,
quant_ctrl, quanto_datastream)
@always_comb
def assign_rle_in():
"""connections between quantizer and RLE module"""
rle_input_datastream.data_in.next = quanto_datastream.data
quanto_datastream.addr.next = concat(rle_input_datastream.buffer_sel,
rle_input_datastream.read_addr)
quanto_datastream.buffer_sel.next = rle_input_datastream.buffer_sel
# instantiation of RLE module
inst_rle = rlencoder(clock, reset, rle_input_datastream,
rle_outputs, rle_config)
@always_seq(clock.posedge, reset=reset)
def counter_huff():
"""counter that increments till three"""
if huffmancntrl.start:
enable_huff_read.next = True
rle_outputs.read_enable.next = True
else:
rle_outputs.read_enable.next = False
if enable_huff_read:
enable_huff_read_s.next = True
enable_huff_read.next = False
if enable_huff_read_s:
if not rle_outputs.fifo_empty:
counter.next = counter + 1
else:
counter.next = 0
rle_outputs.read_enable.next = False
if counter >= value:
rle_outputs.read_enable.next = not rle_outputs.read_enable
counter.next = 0
if huffmancntrl.ready or rle_outputs.fifo_empty:
rle_outputs.read_enable.next = False
enable_huff_read_s.next = False
if huffmancntrl.ready:
rle_outputs.read_enable.next = False
enable_huff_read_s.next = False
counter.next = 0
@always_comb
def assign_huffman_in():
""""Huffman Module and RLE Module connections"""
huffmandatastream.runlength.next = rle_outputs.runlength
huffmandatastream.vli_size.next = rle_outputs.size
huffmandatastream.vli.next = rle_outputs.amplitude
huffmandatastream.data_valid.next = rle_outputs.read_enable
rle_fifo_empty.next = rle_outputs.fifo_empty
rle_outputs.buffer_sel.next = huffmandatastream.buffer_sel
# instantiation of Huffman Module
inst_huffman = huffman(clock, reset, huffmancntrl, bufferdatabus,
huffmandatastream, img_size, rle_fifo_empty)
@always_comb
def assign_bs_in():
"""connections between ByteStuffer and Huffman Module"""
bs_in_stream.data_in.next = bufferdatabus.huf_packed_byte
bs_in_stream.fifo_empty.next = bufferdatabus.fifo_empty
bufferdatabus.read_req.next = bs_in_stream.read
@always_comb
def assig_buff():
"""assign buffers between ByteStuffer and Huffman"""
bufferdatabus.buffer_sel.next = bs_in_stream.buffer_sel
# instantiation of Byte stuffer
inst_bytestuffer = bytestuffer(clock, reset, bs_in_stream,
bs_out_stream, bs_cntrl, num_enc_bytes)
@always_comb
def assign_out():
"""output from the Backend Module"""
data_out.next = bs_out_stream.byte
addr.next = bs_out_stream.addr
return (inst_dbuf, control_ready_valid, assign_quant_in,
inst_quant, assign_rle_in, inst_rle, counter_huff,
assign_huffman_in, inst_huffman, assign_bs_in,
assig_buff, inst_bytestuffer, assign_out)
def backend(clock, reset, start, data_in, write_addr, write_enable, data_out,
ready, addr, num_enc_bytes):
"""
Constants:
width_data : width of the input data
width_addr : width of the address accessed by a module
width_runlength : width of the runlength value
width_size : width of the size value
width_out_byte : width of output byte
width_num_bytes : max encoded bytes width
"""
width_data = len(data_in)
width_addr = len(write_addr)
width_num_bytes = len(num_enc_bytes)
width_runlength = 4
width_byte = 8
width_size = width_data.bit_length()
# used by quantizer to read data from input DRAM
read_addr = Signal(intbv(0)[width_addr:])
# output from the input DRAM
data_in_quantiser = Signal(intbv(0)[width_data:])
# quantizer data and control streams
quanti_datastream = QuantIODataStream(width_data, width_addr - 1)
quanto_datastream = QuantIODataStream(width_data, width_addr - 1)
quant_ctrl = QuantCtrl()
# rle data and control streams
rle_input_datastream = DataStream(width_data, width_addr - 1)
rle_outputs = BufferDataBus(width_data, width_size, width_runlength)
rle_config = RLEConfig()
huffmandatastream = HuffmanDataStream(width_runlength, width_size,
width_data, width_addr - 1)
bufferdatabus = HuffBufferDataBus(width_byte)
huffmancntrl = HuffmanCntrl()
img_size = ImgSize(100, 100)
rle_fifo_empty = Signal(bool(0))
bs_in_stream = BSInputDataStream(width_byte)
bs_out_stream = BSOutputDataStream(width_byte, width_num_bytes)
bs_cntrl = BScntrl()
ready_rle = Signal(bool(0))
ready_huffman = Signal(bool(0))
# control signals
wait = Signal(intbv(0)[3:])
enable_huff_read = Signal(bool(0))
counter = Signal(intbv(0)[3:])
value = Signal(intbv(4)[4:])
ready_quant = Signal(bool(0))
ready_bytestuffer = Signal(bool(0))
enable_huff_read_s = Signal(bool(0))
# instantiation of DRAM
inst_dbuf = dram(clock, data_in, write_addr, read_addr, write_enable,
data_in_quantiser)
@always_seq(clock.posedge, reset=reset)
def control_ready_valid():
"""control flow that operated between blocks"""
# initially when the first block enters
if wait == 0:
if start:
quant_ctrl.start.next = True
quant_ctrl.color_component.next = 1
else:
quant_ctrl.start.next = False
if quant_ctrl.ready:
ready.next = True
wait.next = 1
# when both rle and quantizer are ready
elif wait == 1:
ready.next = False
if start:
rle_config.start.next = True
quant_ctrl.start.next = True
quant_ctrl.color_component.next = 2
rle_config.color_component.next = 1
else:
rle_config.start.next = False
quant_ctrl.start.next = False
if quant_ctrl.ready:
ready_quant.next = True
if rle_config.ready:
ready_rle.next = True
if ready_quant and ready_rle:
ready.next = True
ready_rle.next = False
ready_quant.next = False
wait.next = 2
# when quantizer, rle and huffman are ready
elif wait == 2:
ready.next = False
if start:
rle_config.start.next = True
quant_ctrl.start.next = True
huffmancntrl.start.next = True
huffmancntrl.color_component.next = 1
rle_config.color_component.next = 2
quant_ctrl.color_component.next = 3
else:
rle_config.start.next = False
quant_ctrl.start.next = False
huffmancntrl.start.next = False
if quant_ctrl.ready:
ready_quant.next = True
if rle_config.ready:
ready_rle.next = True
if huffmancntrl.ready:
ready_huffman.next = True
if ready_quant and ready_rle and ready_huffman:
ready.next = True
ready_rle.next = False
ready_quant.next = False
ready_huffman.next = False
wait.next = 3
# when all the four blocks are ready
elif wait == 3:
ready.next = False
if start:
rle_config.start.next = True
quant_ctrl.start.next = True
huffmancntrl.start.next = True
bs_cntrl.start.next = True
if huffmancntrl.color_component == 3:
huffmancntrl.color_component.next = 1
if quant_ctrl.color_component == 3:
quant_ctrl.color_component.next = 1
if rle_config.color_component == 3:
rle_config.color_component.next = 1
else:
huffmancntrl.color_component.next = (
huffmancntrl.color_component + 1)
rle_config.color_component.next = (
rle_config.color_component + 1)
quant_ctrl.color_component.next = (
quant_ctrl.color_component + 1)
else:
rle_config.start.next = False
quant_ctrl.start.next = False
huffmancntrl.start.next = False
bs_cntrl.start.next = False
if quant_ctrl.ready:
ready_quant.next = True
if rle_config.ready:
ready_rle.next = True
if huffmancntrl.ready:
ready_huffman.next = True
if bs_cntrl.ready:
ready_bytestuffer.next = True
if (ready_quant and ready_rle) and (ready_huffman
and ready_bytestuffer):
ready.next = True
ready_rle.next = False
ready_quant.next = False
ready_huffman.next = False
ready_bytestuffer.next = False
wait.next = 3
@always_comb
def assign_quant_in():
"""quantizer and DRAM connections"""
quanti_datastream.data.next = data_in_quantiser
read_addr.next = concat(quanti_datastream.buffer_sel,
quanti_datastream.addr.next)
# instantiation of quantizer module
inst_quant = quantizer(clock, reset, quanti_datastream, quant_ctrl,
quanto_datastream)
@always_comb
def assign_rle_in():
"""connections between quantizer and RLE module"""
rle_input_datastream.data_in.next = quanto_datastream.data
quanto_datastream.addr.next = concat(rle_input_datastream.buffer_sel,
rle_input_datastream.read_addr)
quanto_datastream.buffer_sel.next = rle_input_datastream.buffer_sel
# instantiation of RLE module
inst_rle = rlencoder(clock, reset, rle_input_datastream, rle_outputs,
rle_config)
@always_seq(clock.posedge, reset=reset)
def counter_huff():
"""counter that increments till three"""
if huffmancntrl.start:
enable_huff_read.next = True
rle_outputs.read_enable.next = True
else:
rle_outputs.read_enable.next = False
if enable_huff_read:
enable_huff_read_s.next = True
enable_huff_read.next = False
if enable_huff_read_s:
if not rle_outputs.fifo_empty:
counter.next = counter + 1
else:
counter.next = 0
rle_outputs.read_enable.next = False
if counter >= value:
rle_outputs.read_enable.next = not rle_outputs.read_enable
counter.next = 0
if huffmancntrl.ready or rle_outputs.fifo_empty:
rle_outputs.read_enable.next = False
enable_huff_read_s.next = False
if huffmancntrl.ready:
rle_outputs.read_enable.next = False
enable_huff_read_s.next = False
counter.next = 0
@always_comb
def assign_huffman_in():
""""Huffman Module and RLE Module connections"""
huffmandatastream.runlength.next = rle_outputs.runlength
huffmandatastream.vli_size.next = rle_outputs.size
huffmandatastream.vli.next = rle_outputs.amplitude
huffmandatastream.data_valid.next = rle_outputs.read_enable
rle_fifo_empty.next = rle_outputs.fifo_empty
rle_outputs.buffer_sel.next = huffmandatastream.buffer_sel
# instantiation of Huffman Module
inst_huffman = huffman(clock, reset, huffmancntrl, bufferdatabus,
huffmandatastream, img_size, rle_fifo_empty)
@always_comb
def assign_bs_in():
"""connections between ByteStuffer and Huffman Module"""
bs_in_stream.data_in.next = bufferdatabus.huf_packed_byte
bs_in_stream.fifo_empty.next = bufferdatabus.fifo_empty
bufferdatabus.read_req.next = bs_in_stream.read
@always_comb
def assig_buff():
"""assign buffers between ByteStuffer and Huffman"""
bufferdatabus.buffer_sel.next = bs_in_stream.buffer_sel
# instantiation of Byte stuffer
inst_bytestuffer = bytestuffer(clock, reset, bs_in_stream, bs_out_stream,
bs_cntrl, num_enc_bytes)
@always_comb
def assign_out():
"""output from the Backend Module"""
data_out.next = bs_out_stream.byte
addr.next = bs_out_stream.addr
return (inst_dbuf, control_ready_valid, assign_quant_in, inst_quant,
assign_rle_in, inst_rle, counter_huff, assign_huffman_in,
inst_huffman, assign_bs_in, assig_buff, inst_bytestuffer,
assign_out)
def bench_rle():
"""bench to test the functionality of RLE"""
# clock and reset signals
clock = Signal(bool(0))
reset = ResetSignal(0, active=1, async=True)
# color component class
component = Component()
assert isinstance(component, Component)
# width of the input data
width_data = 12
# width of the address register
width_addr = 6
# width of the register to store size
width_size = width_data.bit_length()
# width to store the runlength
width_runlength = 4
# input data stream into the register
datastream = DataStream(width_data, width_addr)
assert isinstance(datastream, DataStream)
# connection between rlecore output bus and Double FIFO
bufferdatabus = BufferDataBus(width_data, width_size, width_runlength)
assert isinstance(bufferdatabus, BufferDataBus)
# selects the color component, manages start and ready values
rleconfig = RLEConfig()
assert isinstance(rleconfig, RLEConfig)
# instantiation for clock and rletop module
inst = rlencoder(clock, reset, datastream, bufferdatabus, rleconfig)
inst_clock = clock_driver(clock)
@instance
def tbstim():
"""RLE input tests given here"""
# reset the stimulus before sending data in
yield pulse_reset(reset, clock)
# write y1 component into 1st buffer
bufferdatabus.buffer_sel.next = False
yield clock.posedge
yield write_block(
clock, red_pixels_1,
datastream,
rleconfig, component.y1_space
)
yield clock.posedge
print ("============================")
# read y1 component from 1st Buffer
yield read_block(True, bufferdatabus, clock)
# write y2 component into 2nd Buffer
yield write_block(
clock, red_pixels_2,
datastream,
rleconfig, component.y2_space
)
yield clock.posedge
print ("============================")
# read y2 component from 2nd Buffer
yield read_block(False, bufferdatabus, clock)
# write cb Component into 1st Buffer
yield write_block(
clock, green_pixels_1,
datastream,
rleconfig, component.cb_space
)
yield clock.posedge
print ("=============================")
# read cb component from 1st Buffer
yield read_block(True, bufferdatabus, clock)
# write cb Component into 2nd Buffer
yield write_block(
clock, green_pixels_2,
datastream,
rleconfig, component.cb_space
)
yield clock.posedge
print ("==============================")
# read cb component from 2nd Buffer
yield read_block(False, bufferdatabus, clock)
# write cr Component into 1st Buffer
yield write_block(
clock, blue_pixels_1,
datastream,
rleconfig, component.cr_space
)
yield clock.posedge
print ("==============================")
# read cr component from 1st Buffer
yield read_block(True, bufferdatabus, clock)
# write cr Component into 2nd Buffer
yield write_block(
clock, blue_pixels_2,
datastream,
rleconfig, component.cr_space
)
yield clock.posedge
print ("==============================")
# read cr component from 1st Buffer
yield read_block(False, bufferdatabus, clock)
print ("==============================")
# end of stream when sof asserts
yield clock.posedge
rleconfig.sof.next = True
yield clock.posedge
raise StopSimulation
return tbstim, inst_clock, inst
def bench_rle():
clock = Signal(bool(0))
reset = ResetSignal(0, active=1, async=True)
# constants for input, runlength, size width
width = 6
constants = Constants(width_addr=width, width_data=12,
max_write_cnt=63, rlength=4,
size=width.bit_length())
pixel = Pixel()
# interfaces to the rle module
# input to the rle core and start signals sent from here
indatastream = InDataStream(constants.width_data)
# signals generated by the rle core
bufferdatabus = BufferDataBus(
constants.width_data, constants.size, constants.rlength)
# selects the color component, manages address values
rleconfig = RLEConfig(constants.max_write_cnt.bit_length())
# rle double buffer constants
width_dbuf = constants.width_data + constants.size + constants.rlength
dfifo_const = Constants(width=width_dbuf, depth=constants.max_write_cnt + 1)
# instantiation for clock and rletop module
inst = rlencoder(
dfifo_const, constants, reset, clock,
indatastream, bufferdatabus, rleconfig
)
inst_clock = clock_driver(clock)
@instance
def tbstim():
# reset the stimulus before sending data in
yield pulse_reset(reset, clock)
# write Y1 component into 1st buffer
bufferdatabus.buffer_sel.next = False
yield clock.posedge
yield write_block(
clock, red_pixels_1,
indatastream,
rleconfig, pixel.Y1
)
yield clock.posedge
print("============================")
# read Y1 component from 1st Buffer
yield read_block(True, bufferdatabus, clock)
# write Y2 component into 2nd Buffer
yield write_block(
clock, red_pixels_2,
indatastream,
rleconfig, pixel.Y2
)
yield clock.posedge
print("============================")
# read Y2 component from 2nd Buffer
yield read_block(False, bufferdatabus, clock)
# write Cb Component into 1st Buffer
yield write_block(
clock, green_pixels_1,
indatastream,
rleconfig, pixel.Cb
)
yield clock.posedge
print("=============================")
# read Cb component from 1st Buffer
yield read_block(True, bufferdatabus, clock)
# write Cb Component into 2nd Buffer
yield write_block(
clock, green_pixels_2,
indatastream,
rleconfig, pixel.Cb
)
yield clock.posedge
print("==============================")
# read Cb component from 2nd Buffer
yield read_block(False, bufferdatabus, clock)
# write Cr Component into 1st Buffer
yield write_block(
clock, blue_pixels_1,
indatastream,
rleconfig, pixel.Cr
)
yield clock.posedge
print("==============================")
# read Cr component from 1st Buffer
yield read_block(True, bufferdatabus, clock)
# write Cr Component into 2nd Buffer
yield write_block(
clock, blue_pixels_2,
indatastream,
rleconfig, pixel.Cr
)
yield clock.posedge
print("==============================")
# read Cr component from 1st Buffer
yield read_block(False, bufferdatabus, clock)
print("==============================")
# end of stream when sof asserts
yield clock.posedge
rleconfig.sof.next = True
yield clock.posedge
raise StopSimulation
return tbstim, inst_clock, inst
def bench_rle():
"""bench to test the functionality of RLE"""
# clock and reset signals
clock = Signal(bool(0))
reset = ResetSignal(0, active=1, async=True)
# color component class
component = Component()
assert isinstance(component, Component)
# width of the input data
width_data = 12
# width of the address register
width_addr = 6
# width of the register to store size
width_size = width_data.bit_length()
# width to store the runlength
width_runlength = 4
# input data stream into the register
datastream = DataStream(width_data, width_addr)
assert isinstance(datastream, DataStream)
# connection between rlecore output bus and Double FIFO
bufferdatabus = BufferDataBus(width_data, width_size, width_runlength)
assert isinstance(bufferdatabus, BufferDataBus)
# selects the color component, manages start and ready values
rleconfig = RLEConfig()
assert isinstance(rleconfig, RLEConfig)
# instantiation for clock and rletop module
inst = rlencoder(clock, reset, datastream, bufferdatabus, rleconfig)
inst_clock = clock_driver(clock)
@instance
def tbstim():
"""RLE input tests given here"""
# reset the stimulus before sending data in
yield pulse_reset(reset, clock)
# write y1 component into 1st buffer
bufferdatabus.buffer_sel.next = False
yield clock.posedge
yield write_block(
clock, red_pixels_1,
datastream,
rleconfig, component.y1_space
)
yield clock.posedge
print ("============================")
# read y1 component from 1st Buffer
yield read_block(True, bufferdatabus, clock)
# write y2 component into 2nd Buffer
yield write_block(
clock, red_pixels_2,
datastream,
rleconfig, component.y2_space
)
yield clock.posedge
print ("============================")
# read y2 component from 2nd Buffer
yield read_block(False, bufferdatabus, clock)
# write cb Component into 1st Buffer
yield write_block(
clock, green_pixels_1,
datastream,
rleconfig, component.cb_space
)
yield clock.posedge
print ("=============================")
# read cb component from 1st Buffer
yield read_block(True, bufferdatabus, clock)
# write cb Component into 2nd Buffer
yield write_block(
clock, green_pixels_2,
datastream,
rleconfig, component.cb_space
)
yield clock.posedge
print ("==============================")
# read cb component from 2nd Buffer
yield read_block(False, bufferdatabus, clock)
# write cr Component into 1st Buffer
yield write_block(
clock, blue_pixels_1,
datastream,
rleconfig, component.cr_space
)
yield clock.posedge
print ("==============================")
# read cr component from 1st Buffer
yield read_block(True, bufferdatabus, clock)
# write cr Component into 2nd Buffer
yield write_block(
clock, blue_pixels_2,
datastream,
rleconfig, component.cr_space
)
yield clock.posedge
print ("==============================")
# read cr component from 1st Buffer
yield read_block(False, bufferdatabus, clock)
print ("==============================")
# end of stream when sof asserts
yield clock.posedge
rleconfig.sof.next = True
yield clock.posedge
raise StopSimulation
return tbstim, inst_clock, inst
