def processAlgorithm(self, progress):
layer = dataobjects.getObjectFromUri(self.getParameterValue(self.INPUT_VECTOR))
rasterPath = unicode(self.getParameterValue(self.INPUT_RASTER))
rasterDS = gdal.Open(rasterPath, gdal.GA_ReadOnly)
geoTransform = rasterDS.GetGeoTransform()
rasterDS = None
fields = QgsFields()
fields.append(QgsField('id', QVariant.Int, '', 10, 0))
fields.append(QgsField('line_id', QVariant.Int, '', 10, 0))
fields.append(QgsField('point_id', QVariant.Int, '', 10, 0))
writer = self.getOutputFromName(self.OUTPUT_LAYER).getVectorWriter(
fields.toList(), QgsWkbTypes.Point, layer.crs())
outFeature = QgsFeature()
outFeature.setFields(fields)
self.fid = 0
self.lineId = 0
self.pointId = 0
features = vector.features(layer)
total = 100.0 / len(features)
for current, f in enumerate(features):
geom = f.geometry()
if geom.isMultipart():
lines = geom.asMultiPolyline()
for line in lines:
for i in xrange(len(line) - 1):
p1 = line[i]
p2 = line[i + 1]
(x1, y1) = raster.mapToPixel(p1.x(), p1.y(),
geoTransform)
(x2, y2) = raster.mapToPixel(p2.x(), p2.y(),
geoTransform)
self.buildLine(x1, y1, x2, y2, geoTransform,
writer, outFeature)
else:
points = geom.asPolyline()
for i in xrange(len(points) - 1):
p1 = points[i]
p2 = points[i + 1]
(x1, y1) = raster.mapToPixel(p1.x(), p1.y(), geoTransform)
(x2, y2) = raster.mapToPixel(p2.x(), p2.y(), geoTransform)
self.buildLine(x1, y1, x2, y2, geoTransform, writer,
outFeature)
self.pointId = 0
self.lineId += 1
progress.setPercentage(int(current * total))
del writer
def processAlgorithm(self, parameters, context, feedback):
layer = QgsProcessingUtils.mapLayerFromString(self.getParameterValue(self.INPUT_VECTOR), context)
rasterPath = str(self.getParameterValue(self.INPUT_RASTER))
rasterDS = gdal.Open(rasterPath, gdal.GA_ReadOnly)
geoTransform = rasterDS.GetGeoTransform()
rasterDS = None
fields = QgsFields()
fields.append(QgsField('id', QVariant.Int, '', 10, 0))
fields.append(QgsField('line_id', QVariant.Int, '', 10, 0))
fields.append(QgsField('point_id', QVariant.Int, '', 10, 0))
writer = self.getOutputFromName(self.OUTPUT_LAYER).getVectorWriter(fields, QgsWkbTypes.Point,
layer.crs(), context)
outFeature = QgsFeature()
outFeature.setFields(fields)
self.fid = 0
self.lineId = 0
self.pointId = 0
features = QgsProcessingUtils.getFeatures(layer, context)
total = 100.0 / layer.featureCount() if layer.featureCount() else 0
for current, f in enumerate(features):
geom = f.geometry()
if geom.isMultipart():
lines = geom.asMultiPolyline()
for line in lines:
for i in range(len(line) - 1):
p1 = line[i]
p2 = line[i + 1]
(x1, y1) = raster.mapToPixel(p1.x(), p1.y(),
geoTransform)
(x2, y2) = raster.mapToPixel(p2.x(), p2.y(),
geoTransform)
self.buildLine(x1, y1, x2, y2, geoTransform,
writer, outFeature)
else:
points = geom.asPolyline()
for i in range(len(points) - 1):
p1 = points[i]
p2 = points[i + 1]
(x1, y1) = raster.mapToPixel(p1.x(), p1.y(), geoTransform)
(x2, y2) = raster.mapToPixel(p2.x(), p2.y(), geoTransform)
self.buildLine(x1, y1, x2, y2, geoTransform, writer,
outFeature)
self.pointId = 0
self.lineId += 1
feedback.setProgress(int(current * total))
del writer
def numpy_stats(band, geometry, geo_transform, no_data, crs):
"""
:param band: A valid band from a raster layer.
:type band: GDALRasterBand
:param geometry: A polygon geometry used to calculate statistics.
:type geometry: QgsGeometry
:param geo_transform: Geo-referencing transform from raster metadata.
:type geo_transform: list (six floats)
:param no_data: Value for no data in the raster.
:type no_data: int, float
:param crs: Coordinate reference system of the vector layer.
:type crs: OGRSpatialReference
:returns: Count, Freq - total number of pixels that intersect with the geometry
and the frequency distribution of these pixel values.
:rtype: (int, dict)
"""
mem_drv = ogr.GetDriverByName('Memory')
driver = gdal.GetDriverByName('MEM')
geom = ogr.CreateGeometryFromWkt(str(geometry.exportToWkt()))
bbox = geometry.boundingBox()
x_min = bbox.xMinimum()
x_max = bbox.xMaximum()
y_min = bbox.yMinimum()
y_max = bbox.yMaximum()
start_column, start_row = mapToPixel(x_min, y_max, geo_transform)
end_column, end_row = mapToPixel(x_max, y_min, geo_transform)
width = end_column - start_column
height = end_row - start_row
if width == 0 or height == 0:
return 0, None
src_offset = (start_column, start_row, width, height)
def processAlgorithm(self, progress):
""" Based on code by Matthew Perry
https://gist.github.com/perrygeo/5667173
"""
layer = dataobjects.getObjectFromUri(self.getParameterValue(self.INPUT_VECTOR))
rasterPath = unicode(self.getParameterValue(self.INPUT_RASTER))
bandNumber = self.getParameterValue(self.RASTER_BAND)
columnPrefix = self.getParameterValue(self.COLUMN_PREFIX)
useGlobalExtent = self.getParameterValue(self.GLOBAL_EXTENT)
rasterDS = gdal.Open(rasterPath, gdal.GA_ReadOnly)
geoTransform = rasterDS.GetGeoTransform()
rasterBand = rasterDS.GetRasterBand(bandNumber)
noData = rasterBand.GetNoDataValue()
cellXSize = abs(geoTransform[1])
cellYSize = abs(geoTransform[5])
rasterXSize = rasterDS.RasterXSize
rasterYSize = rasterDS.RasterYSize
rasterBBox = QgsRectangle(geoTransform[0], geoTransform[3] - cellYSize
* rasterYSize, geoTransform[0] + cellXSize
* rasterXSize, geoTransform[3])
rasterGeom = QgsGeometry.fromRect(rasterBBox)
crs = osr.SpatialReference()
crs.ImportFromProj4(str(layer.crs().toProj4()))
if useGlobalExtent:
xMin = rasterBBox.xMinimum()
xMax = rasterBBox.xMaximum()
yMin = rasterBBox.yMinimum()
yMax = rasterBBox.yMaximum()
(startColumn, startRow) = mapToPixel(xMin, yMax, geoTransform)
(endColumn, endRow) = mapToPixel(xMax, yMin, geoTransform)
width = endColumn - startColumn
height = endRow - startRow
srcOffset = (startColumn, startRow, width, height)
srcArray = rasterBand.ReadAsArray(*srcOffset)
newGeoTransform = (
geoTransform[0] + srcOffset[0] * geoTransform[1],
geoTransform[1],
0.0,
geoTransform[3] + srcOffset[1] * geoTransform[5],
0.0,
geoTransform[5],
)
memVectorDriver = ogr.GetDriverByName('Memory')
memRasterDriver = gdal.GetDriverByName('MEM')
fields = layer.pendingFields()
(idxMin, fields) = vector.findOrCreateField(layer, fields,
columnPrefix + 'min', 21, 6)
(idxMax, fields) = vector.findOrCreateField(layer, fields,
columnPrefix + 'max', 21, 6)
(idxSum, fields) = vector.findOrCreateField(layer, fields,
columnPrefix + 'sum', 21, 6)
(idxCount, fields) = vector.findOrCreateField(layer, fields,
columnPrefix + 'count', 21, 6)
(idxMean, fields) = vector.findOrCreateField(layer, fields,
columnPrefix + 'mean', 21, 6)
(idxStd, fields) = vector.findOrCreateField(layer, fields,
columnPrefix + 'std', 21, 6)
(idxUnique, fields) = vector.findOrCreateField(layer, fields,
columnPrefix + 'unique', 21, 6)
(idxRange, fields) = vector.findOrCreateField(layer, fields,
columnPrefix + 'range', 21, 6)
(idxVar, fields) = vector.findOrCreateField(layer, fields, columnPrefix
+ 'var', 21, 6)
# idxMedian, fields = ftools_utils.findOrCreateField(layer, fields,
# columnPrefix + "median", 21, 6)
writer = self.getOutputFromName(self.OUTPUT_LAYER).getVectorWriter(
fields.toList(), layer.dataProvider().geometryType(), layer.crs())
outFeat = QgsFeature()
outFeat.initAttributes(len(fields))
outFeat.setFields(fields)
current = 0
features = vector.features(layer)
total = 100.0 / len(features)
for f in features:
geom = f.geometry()
intersectedGeom = rasterGeom.intersection(geom)
ogrGeom = ogr.CreateGeometryFromWkt(intersectedGeom.exportToWkt())
if not useGlobalExtent:
bbox = intersectedGeom.boundingBox()
xMin = bbox.xMinimum()
xMax = bbox.xMaximum()
yMin = bbox.yMinimum()
yMax = bbox.yMaximum()
(startColumn, startRow) = mapToPixel(xMin, yMax, geoTransform)
(endColumn, endRow) = mapToPixel(xMax, yMin, geoTransform)
width = endColumn - startColumn
height = endRow - startRow
if width == 0 or height == 0:
continue
srcOffset = (startColumn, startRow, width, height)
srcArray = rasterBand.ReadAsArray(*srcOffset)
newGeoTransform = (
geoTransform[0] + srcOffset[0] * geoTransform[1],
geoTransform[1],
0.0,
geoTransform[3] + srcOffset[1] * geoTransform[5],
0.0,
geoTransform[5],
)
# Create a temporary vector layer in memory
memVDS = memVectorDriver.CreateDataSource('out')
memLayer = memVDS.CreateLayer('poly', crs, ogr.wkbPolygon)
ft = ogr.Feature(memLayer.GetLayerDefn())
ft.SetGeometry(ogrGeom)
memLayer.CreateFeature(ft)
ft.Destroy()
# Rasterize it
rasterizedDS = memRasterDriver.Create('', srcOffset[2],
srcOffset[3], 1, gdal.GDT_Byte)
rasterizedDS.SetGeoTransform(newGeoTransform)
gdal.RasterizeLayer(rasterizedDS, [1], memLayer, burn_values=[1])
rasterizedArray = rasterizedDS.ReadAsArray()
srcArray = numpy.nan_to_num(srcArray)
masked = numpy.ma.MaskedArray(srcArray,
mask=numpy.logical_or(srcArray == noData,
numpy.logical_not(rasterizedArray)))
outFeat.setGeometry(geom)
attrs = f.attributes()
attrs.insert(idxMin, float(masked.min()))
attrs.insert(idxMax, float(masked.max()))
attrs.insert(idxSum, float(masked.sum()))
attrs.insert(idxCount, int(masked.count()))
attrs.insert(idxMean, float(masked.mean()))
attrs.insert(idxStd, float(masked.std()))
attrs.insert(idxUnique, numpy.unique(masked.compressed()).size)
attrs.insert(idxRange, float(masked.max()) - float(masked.min()))
attrs.insert(idxVar, float(masked.var()))
# attrs.insert(idxMedian, float(masked.median()))
outFeat.setAttributes(attrs)
writer.addFeature(outFeat)
memVDS = None
rasterizedDS = None
current += 1
progress.setPercentage(int(current * total))
rasterDS = None
del writer
def processAlgorithm(self, progress):
layer = dataobjects.getObjectFromUri(
self.getParameterValue(self.INPUT_VECTOR))
rasterPath = unicode(self.getParameterValue(self.INPUT_RASTER))
rasterDS = gdal.Open(rasterPath, gdal.GA_ReadOnly)
geoTransform = rasterDS.GetGeoTransform()
rasterDS = None
fields = QgsFields()
fields.append(QgsField('id', QVariant.Int, '', 10, 0))
fields.append(QgsField('poly_id', QVariant.Int, '', 10, 0))
fields.append(QgsField('point_id', QVariant.Int, '', 10, 0))
writer = self.getOutputFromName(
self.OUTPUT_LAYER).getVectorWriter(fields.toList(),
QGis.WKBPoint,
layer.crs())
outFeature = QgsFeature()
outFeature.setFields(fields)
point = QgsPoint()
fid = 0
polyId = 0
pointId = 0
current = 0
features = vector.features(layer)
total = 100.0 / len(features)
for f in features:
geom = f.geometry()
bbox = geom.boundingBox()
xMin = bbox.xMinimum()
xMax = bbox.xMaximum()
yMin = bbox.yMinimum()
yMax = bbox.yMaximum()
(startRow, startColumn) = raster.mapToPixel(xMin, yMax, geoTransform)
(endRow, endColumn) = raster.mapToPixel(xMax, yMin, geoTransform)
for row in xrange(startRow, endRow + 1):
for col in xrange(startColumn, endColumn + 1):
(x, y) = raster.pixelToMap(row, col, geoTransform)
point.setX(x)
point.setY(y)
if geom.contains(point):
outFeature.setGeometry(QgsGeometry.fromPoint(point))
outFeature['id'] = fid
outFeature['poly_id'] = polyId
outFeature['point_id'] = pointId
fid += 1
pointId += 1
writer.addFeature(outFeature)
pointId = 0
polyId += 1
current += 1
progress.setPercentage(int(current * total))
del writer
def processAlgorithm(self, parameters, context, feedback):
layer = QgsProcessingUtils.mapLayerFromString(self.getParameterValue(self.INPUT_VECTOR), context)
rasterPath = str(self.getParameterValue(self.INPUT_RASTER))
rasterDS = gdal.Open(rasterPath, gdal.GA_ReadOnly)
geoTransform = rasterDS.GetGeoTransform()
rasterDS = None
fields = QgsFields()
fields.append(QgsField('id', QVariant.Int, '', 10, 0))
fields.append(QgsField('poly_id', QVariant.Int, '', 10, 0))
fields.append(QgsField('point_id', QVariant.Int, '', 10, 0))
writer = self.getOutputFromName(self.OUTPUT_LAYER).getVectorWriter(fields, QgsWkbTypes.Point,
layer.crs(), context)
outFeature = QgsFeature()
outFeature.setFields(fields)
fid = 0
polyId = 0
pointId = 0
features = QgsProcessingUtils.getFeatures(layer, context)
total = 100.0 / layer.featureCount() if layer.featureCount() else 0
for current, f in enumerate(features):
geom = f.geometry()
bbox = geom.boundingBox()
xMin = bbox.xMinimum()
xMax = bbox.xMaximum()
yMin = bbox.yMinimum()
yMax = bbox.yMaximum()
(startRow, startColumn) = raster.mapToPixel(xMin, yMax, geoTransform)
(endRow, endColumn) = raster.mapToPixel(xMax, yMin, geoTransform)
# use prepared geometries for faster intersection tests
engine = QgsGeometry.createGeometryEngine(geom.geometry())
engine.prepareGeometry()
for row in range(startRow, endRow + 1):
for col in range(startColumn, endColumn + 1):
(x, y) = raster.pixelToMap(row, col, geoTransform)
point = QgsPointXY()
point.setX(x)
point.setY(y)
if engine.contains(point):
outFeature.setGeometry(QgsGeometry(point))
outFeature['id'] = fid
outFeature['poly_id'] = polyId
outFeature['point_id'] = pointId
fid += 1
pointId += 1
writer.addFeature(outFeature, QgsFeatureSink.FastInsert)
pointId = 0
polyId += 1
feedback.setProgress(int(current * total))
del writer
def numpy_stats(band, geometry, geo_transform, no_data, crs):
"""
:param band: A valid band from a raster layer.
:type band: GDALRasterBand
:param geometry: A polygon geometry used to calculate statistics.
:type geometry: QgsGeometry
:param geo_transform: Geo-referencing transform from raster metadata.
:type geo_transform: list (six floats)
:param no_data: Value for no data in the raster.
:type no_data: int, float
:param crs: Coordinate reference system of the vector layer.
:type crs: OGRSpatialReference
:returns: Count, Freq - total number of pixels that intersect with the geometry
and the frequency distribution of these pixel values.
:rtype: (int, dict)
"""
mem_drv = ogr.GetDriverByName("Memory")
driver = gdal.GetDriverByName("MEM")
geom = ogr.CreateGeometryFromWkt(str(geometry.exportToWkt()))
bbox = geometry.boundingBox()
x_min = bbox.xMinimum()
x_max = bbox.xMaximum()
y_min = bbox.yMinimum()
y_max = bbox.yMaximum()
start_column, start_row = mapToPixel(x_min, y_max, geo_transform)
end_column, end_row = mapToPixel(x_max, y_min, geo_transform)
width = end_column - start_column
height = end_row - start_row
if width == 0 or height == 0:
return 0, None
src_offset = (start_column, start_row, width, height)
new_geo_transform = (
(geo_transform[0] + (src_offset[0] * geo_transform[1])),
geo_transform[1],
0.0,
(geo_transform[3] + (src_offset[1] * geo_transform[5])),
0.0,
geo_transform[5],
)
# Create a temporary vector layer in memory
mem_ds = mem_drv.CreateDataSource("out")
mem_layer = mem_ds.CreateLayer("poly", crs, ogr.wkbMultiPolygon)
feat = ogr.Feature(mem_layer.GetLayerDefn())
feat.SetGeometry(geom)
mem_layer.CreateFeature(feat)
feat.Destroy()
# Rasterize it
rasterized_ds = driver.Create("", src_offset[2], src_offset[3], 1, gdal.GDT_Byte)
rasterized_ds.SetGeoTransform(new_geo_transform)
gdal.RasterizeLayer(rasterized_ds, [1], mem_layer, burn_values=[1])
# scan the original raster row-by-row to gather statistics
count = 0
freq = {}
for r in range(height):
src_array = band.ReadAsArray(start_column, r + start_row, width, 1)
rv_array = rasterized_ds.ReadAsArray(0, r, width, 1)
# Mask the source data array with our current feature
# we take the logical_not to flip 0<->1 to get the correct mask effect
# we also mask out no data values explicitly
src_array = numpy.nan_to_num(src_array)
masked = numpy.ma.MaskedArray(
src_array, mask=numpy.logical_or(src_array == no_data, numpy.logical_not(rv_array))
)
# get sorted frequency counts
compressed = masked.compressed()
if compressed.any():
for (k, v) in unique_count(compressed):
if k in freq:
freq[k] = freq[k] + v
else:
freq[k] = v
count = count + compressed.size
return count, freq
def processAlgorithm(self, progress):
rasterPath = self.getParameterValue(self.INPUT_DEM)
layer = dataobjects.getObjectFromUri(
self.getParameterValue(self.BOUNDARY_LAYER))
step = self.getParameterValue(self.STEP)
percentage = self.getParameterValue(self.USE_PERCENTAGE)
outputPath = self.getOutputValue(self.OUTPUT_DIRECTORY)
rasterDS = gdal.Open(rasterPath, gdal.GA_ReadOnly)
geoTransform = rasterDS.GetGeoTransform()
rasterBand = rasterDS.GetRasterBand(1)
noData = rasterBand.GetNoDataValue()
cellXSize = abs(geoTransform[1])
cellYSize = abs(geoTransform[5])
rasterXSize = rasterDS.RasterXSize
rasterYSize = rasterDS.RasterYSize
rasterBBox = QgsRectangle(geoTransform[0],
geoTransform[3] - cellYSize * rasterYSize,
geoTransform[0] + cellXSize * rasterXSize,
geoTransform[3])
rasterGeom = QgsGeometry.fromRect(rasterBBox)
crs = osr.SpatialReference()
crs.ImportFromProj4(str(layer.crs().toProj4()))
memVectorDriver = ogr.GetDriverByName('Memory')
memRasterDriver = gdal.GetDriverByName('MEM')
features = vector.features(layer)
total = 100.0 / len(features)
for current, f in enumerate(features):
geom = f.geometry()
intersectedGeom = rasterGeom.intersection(geom)
if intersectedGeom.isGeosEmpty():
progress.setInfo(
self.tr('Feature %d does not intersect raster or '
'entirely located in NODATA area' % f.id()))
continue
fName = os.path.join(
outputPath, 'hystogram_%s_%s.csv' % (layer.name(), f.id()))
ogrGeom = ogr.CreateGeometryFromWkt(intersectedGeom.exportToWkt())
bbox = intersectedGeom.boundingBox()
xMin = bbox.xMinimum()
xMax = bbox.xMaximum()
yMin = bbox.yMinimum()
yMax = bbox.yMaximum()
(startColumn,
startRow) = raster.mapToPixel(xMin, yMax, geoTransform)
(endColumn, endRow) = raster.mapToPixel(xMax, yMin, geoTransform)
width = endColumn - startColumn
height = endRow - startRow
srcOffset = (startColumn, startRow, width, height)
srcArray = rasterBand.ReadAsArray(*srcOffset)
if srcOffset[2] == 0 or srcOffset[3] == 0:
progress.setInfo(
self.tr('Feature %d is smaller than raster '
'cell size' % f.id()))
continue
newGeoTransform = (geoTransform[0] +
srcOffset[0] * geoTransform[1], geoTransform[1],
0.0, geoTransform[3] +
srcOffset[1] * geoTransform[5], 0.0,
geoTransform[5])
memVDS = memVectorDriver.CreateDataSource('out')
memLayer = memVDS.CreateLayer('poly', crs, ogr.wkbPolygon)
ft = ogr.Feature(memLayer.GetLayerDefn())
ft.SetGeometry(ogrGeom)
memLayer.CreateFeature(ft)
ft.Destroy()
rasterizedDS = memRasterDriver.Create('', srcOffset[2],
srcOffset[3], 1,
gdal.GDT_Byte)
rasterizedDS.SetGeoTransform(newGeoTransform)
gdal.RasterizeLayer(rasterizedDS, [1], memLayer, burn_values=[1])
rasterizedArray = rasterizedDS.ReadAsArray()
srcArray = numpy.nan_to_num(srcArray)
masked = numpy.ma.MaskedArray(
srcArray,
mask=numpy.logical_or(srcArray == noData,
numpy.logical_not(rasterizedArray)))
self.calculateHypsometry(f.id(), fName, progress, masked,
cellXSize, cellYSize, percentage, step)
memVDS = None
rasterizedDS = None
progress.setPercentage(int(current * total))
rasterDS = None
def processAlgorithm(self, parameters, context, feedback):
raster_layer = self.parameterAsRasterLayer(parameters, self.INPUT_DEM, context)
target_crs = raster_layer.crs()
rasterPath = raster_layer.source()
source = self.parameterAsSource(parameters, self.BOUNDARY_LAYER, context)
if source is None:
raise QgsProcessingException(self.invalidSourceError(parameters, self.BOUNDARY_LAYER))
step = self.parameterAsDouble(parameters, self.STEP, context)
percentage = self.parameterAsBool(parameters, self.USE_PERCENTAGE, context)
outputPath = self.parameterAsString(parameters, self.OUTPUT_DIRECTORY, context)
rasterDS = gdal.Open(rasterPath, gdal.GA_ReadOnly)
geoTransform = rasterDS.GetGeoTransform()
rasterBand = rasterDS.GetRasterBand(1)
noData = rasterBand.GetNoDataValue()
cellXSize = abs(geoTransform[1])
cellYSize = abs(geoTransform[5])
rasterXSize = rasterDS.RasterXSize
rasterYSize = rasterDS.RasterYSize
rasterBBox = QgsRectangle(geoTransform[0],
geoTransform[3] - cellYSize * rasterYSize,
geoTransform[0] + cellXSize * rasterXSize,
geoTransform[3])
rasterGeom = QgsGeometry.fromRect(rasterBBox)
crs = osr.SpatialReference()
crs.ImportFromProj4(str(target_crs.toProj4()))
memVectorDriver = ogr.GetDriverByName('Memory')
memRasterDriver = gdal.GetDriverByName('MEM')
features = source.getFeatures(QgsFeatureRequest().setDestinationCrs(target_crs, context.transformContext()))
total = 100.0 / source.featureCount() if source.featureCount() else 0
for current, f in enumerate(features):
if not f.hasGeometry():
continue
if feedback.isCanceled():
break
geom = f.geometry()
intersectedGeom = rasterGeom.intersection(geom)
if intersectedGeom.isEmpty():
feedback.pushInfo(
self.tr('Feature {0} does not intersect raster or '
'entirely located in NODATA area').format(f.id()))
continue
fName = os.path.join(
outputPath, 'hystogram_%s_%s.csv' % (source.sourceName(), f.id()))
ogrGeom = ogr.CreateGeometryFromWkt(intersectedGeom.asWkt())
bbox = intersectedGeom.boundingBox()
xMin = bbox.xMinimum()
xMax = bbox.xMaximum()
yMin = bbox.yMinimum()
yMax = bbox.yMaximum()
(startColumn, startRow) = raster.mapToPixel(xMin, yMax, geoTransform)
(endColumn, endRow) = raster.mapToPixel(xMax, yMin, geoTransform)
width = endColumn - startColumn
height = endRow - startRow
srcOffset = (startColumn, startRow, width, height)
srcArray = rasterBand.ReadAsArray(*srcOffset)
if srcOffset[2] == 0 or srcOffset[3] == 0:
feedback.pushInfo(
self.tr('Feature {0} is smaller than raster '
'cell size').format(f.id()))
continue
newGeoTransform = (
geoTransform[0] + srcOffset[0] * geoTransform[1],
geoTransform[1],
0.0,
geoTransform[3] + srcOffset[1] * geoTransform[5],
0.0,
geoTransform[5]
)
memVDS = memVectorDriver.CreateDataSource('out')
memLayer = memVDS.CreateLayer('poly', crs, ogr.wkbPolygon)
ft = ogr.Feature(memLayer.GetLayerDefn())
ft.SetGeometry(ogrGeom)
memLayer.CreateFeature(ft)
ft.Destroy()
rasterizedDS = memRasterDriver.Create('', srcOffset[2],
srcOffset[3], 1, gdal.GDT_Byte)
rasterizedDS.SetGeoTransform(newGeoTransform)
gdal.RasterizeLayer(rasterizedDS, [1], memLayer, burn_values=[1])
rasterizedArray = rasterizedDS.ReadAsArray()
srcArray = numpy.nan_to_num(srcArray)
masked = numpy.ma.MaskedArray(srcArray,
mask=numpy.logical_or(srcArray == noData,
numpy.logical_not(rasterizedArray)))
self.calculateHypsometry(f.id(), fName, feedback, masked,
cellXSize, cellYSize, percentage, step)
memVDS = None
rasterizedDS = None
feedback.setProgress(int(current * total))
rasterDS = None
return {self.OUTPUT_DIRECTORY: outputPath}
def processAlgorithm(self, parameters, context, feedback):
source = self.parameterAsSource(parameters, self.INPUT_VECTOR, context)
raster_layer = self.parameterAsRasterLayer(parameters,
self.INPUT_RASTER, context)
rasterPath = exportRasterLayer(raster_layer)
rasterDS = gdal.Open(rasterPath, gdal.GA_ReadOnly)
geoTransform = rasterDS.GetGeoTransform()
fields = QgsFields()
fields.append(QgsField('id', QVariant.Int, '', 10, 0))
fields.append(QgsField('poly_id', QVariant.Int, '', 10, 0))
fields.append(QgsField('point_id', QVariant.Int, '', 10, 0))
(sink, dest_id) = self.parameterAsSink(parameters, self.OUTPUT,
context, fields,
QgsWkbTypes.Point,
raster_layer.crs())
outFeature = QgsFeature()
outFeature.setFields(fields)
fid = 0
polyId = 0
pointId = 0
features = source.getFeatures(QgsFeatureRequest().setDestinationCrs(
raster_layer.crs()))
total = 100.0 / source.featureCount() if source.featureCount() else 0
for current, f in enumerate(features):
if feedback.isCanceled():
break
if not f.hasGeometry():
continue
geom = f.geometry()
bbox = geom.boundingBox()
xMin = bbox.xMinimum()
xMax = bbox.xMaximum()
yMin = bbox.yMinimum()
yMax = bbox.yMaximum()
(startRow,
startColumn) = raster.mapToPixel(xMin, yMax, geoTransform)
(endRow, endColumn) = raster.mapToPixel(xMax, yMin, geoTransform)
# use prepared geometries for faster intersection tests
engine = QgsGeometry.createGeometryEngine(geom.constGet())
engine.prepareGeometry()
for row in range(startRow, endRow + 1):
for col in range(startColumn, endColumn + 1):
if feedback.isCanceled():
break
(x, y) = raster.pixelToMap(row, col, geoTransform)
point = QgsPoint(x, y)
if engine.contains(point):
outFeature.setGeometry(QgsGeometry(point))
outFeature['id'] = fid
outFeature['poly_id'] = polyId
outFeature['point_id'] = pointId
fid += 1
pointId += 1
sink.addFeature(outFeature, QgsFeatureSink.FastInsert)
pointId = 0
polyId += 1
feedback.setProgress(int(current * total))
return {self.OUTPUT: dest_id}
def processAlgorithm(self, parameters, context, feedback):
source = self.parameterAsSource(parameters, self.INPUT_VECTOR, context)
if source is None:
raise QgsProcessingException(self.invalidSourceError(parameters, self.INPUT_VECTOR))
raster_layer = self.parameterAsRasterLayer(parameters, self.INPUT_RASTER, context)
rasterPath = raster_layer.source()
rasterDS = gdal.Open(rasterPath, gdal.GA_ReadOnly)
geoTransform = rasterDS.GetGeoTransform()
rasterDS = None
fields = QgsFields()
fields.append(QgsField('id', QVariant.Int, '', 10, 0))
fields.append(QgsField('line_id', QVariant.Int, '', 10, 0))
fields.append(QgsField('point_id', QVariant.Int, '', 10, 0))
(sink, dest_id) = self.parameterAsSink(parameters, self.OUTPUT, context,
fields, QgsWkbTypes.Point, raster_layer.crs())
if sink is None:
raise QgsProcessingException(self.invalidSinkError(parameters, self.OUTPUT))
outFeature = QgsFeature()
outFeature.setFields(fields)
self.fid = 0
self.lineId = 0
self.pointId = 0
features = source.getFeatures(QgsFeatureRequest().setDestinationCrs(raster_layer.crs(), context.transformContext()))
total = 100.0 / source.featureCount() if source.featureCount() else 0
for current, f in enumerate(features):
if feedback.isCanceled():
break
geom = f.geometry()
if geom.isMultipart():
lines = geom.asMultiPolyline()
for line in lines:
for i in range(len(line) - 1):
p1 = line[i]
p2 = line[i + 1]
(x1, y1) = raster.mapToPixel(p1.x(), p1.y(),
geoTransform)
(x2, y2) = raster.mapToPixel(p2.x(), p2.y(),
geoTransform)
self.buildLine(x1, y1, x2, y2, geoTransform,
sink, outFeature)
else:
points = geom.asPolyline()
for i in range(len(points) - 1):
p1 = points[i]
p2 = points[i + 1]
(x1, y1) = raster.mapToPixel(p1.x(), p1.y(), geoTransform)
(x2, y2) = raster.mapToPixel(p2.x(), p2.y(), geoTransform)
self.buildLine(x1, y1, x2, y2, geoTransform, sink,
outFeature)
self.pointId = 0
self.lineId += 1
feedback.setProgress(int(current * total))
return {self.OUTPUT: dest_id}
def processAlgorithm(self, parameters, context, feedback):
raster_layer = self.parameterAsRasterLayer(parameters, self.INPUT_DEM,
context)
target_crs = raster_layer.crs()
rasterPath = raster_layer.source()
source = self.parameterAsSource(parameters, self.BOUNDARY_LAYER,
context)
step = self.parameterAsDouble(parameters, self.STEP, context)
percentage = self.parameterAsBool(parameters, self.USE_PERCENTAGE,
context)
outputPath = self.parameterAsString(parameters, self.OUTPUT_DIRECTORY,
context)
rasterDS = gdal.Open(rasterPath, gdal.GA_ReadOnly)
geoTransform = rasterDS.GetGeoTransform()
rasterBand = rasterDS.GetRasterBand(1)
noData = rasterBand.GetNoDataValue()
cellXSize = abs(geoTransform[1])
cellYSize = abs(geoTransform[5])
rasterXSize = rasterDS.RasterXSize
rasterYSize = rasterDS.RasterYSize
rasterBBox = QgsRectangle(geoTransform[0],
geoTransform[3] - cellYSize * rasterYSize,
geoTransform[0] + cellXSize * rasterXSize,
geoTransform[3])
rasterGeom = QgsGeometry.fromRect(rasterBBox)
crs = osr.SpatialReference()
crs.ImportFromProj4(str(target_crs.toProj4()))
memVectorDriver = ogr.GetDriverByName('Memory')
memRasterDriver = gdal.GetDriverByName('MEM')
features = source.getFeatures(QgsFeatureRequest().setDestinationCrs(
target_crs, context.transformContext()))
total = 100.0 / source.featureCount() if source.featureCount() else 0
for current, f in enumerate(features):
if not f.hasGeometry():
continue
if feedback.isCanceled():
break
geom = f.geometry()
intersectedGeom = rasterGeom.intersection(geom)
if intersectedGeom.isEmpty():
feedback.pushInfo(
self.tr('Feature {0} does not intersect raster or '
'entirely located in NODATA area').format(f.id()))
continue
fName = os.path.join(
outputPath,
'hystogram_%s_%s.csv' % (source.sourceName(), f.id()))
ogrGeom = ogr.CreateGeometryFromWkt(intersectedGeom.asWkt())
bbox = intersectedGeom.boundingBox()
xMin = bbox.xMinimum()
xMax = bbox.xMaximum()
yMin = bbox.yMinimum()
yMax = bbox.yMaximum()
(startColumn,
startRow) = raster.mapToPixel(xMin, yMax, geoTransform)
(endColumn, endRow) = raster.mapToPixel(xMax, yMin, geoTransform)
width = endColumn - startColumn
height = endRow - startRow
srcOffset = (startColumn, startRow, width, height)
srcArray = rasterBand.ReadAsArray(*srcOffset)
if srcOffset[2] == 0 or srcOffset[3] == 0:
feedback.pushInfo(
self.tr('Feature {0} is smaller than raster '
'cell size').format(f.id()))
continue
newGeoTransform = (geoTransform[0] +
srcOffset[0] * geoTransform[1], geoTransform[1],
0.0, geoTransform[3] +
srcOffset[1] * geoTransform[5], 0.0,
geoTransform[5])
memVDS = memVectorDriver.CreateDataSource('out')
memLayer = memVDS.CreateLayer('poly', crs, ogr.wkbPolygon)
ft = ogr.Feature(memLayer.GetLayerDefn())
ft.SetGeometry(ogrGeom)
memLayer.CreateFeature(ft)
ft.Destroy()
rasterizedDS = memRasterDriver.Create('', srcOffset[2],
srcOffset[3], 1,
gdal.GDT_Byte)
rasterizedDS.SetGeoTransform(newGeoTransform)
gdal.RasterizeLayer(rasterizedDS, [1], memLayer, burn_values=[1])
rasterizedArray = rasterizedDS.ReadAsArray()
srcArray = numpy.nan_to_num(srcArray)
masked = numpy.ma.MaskedArray(
srcArray,
mask=numpy.logical_or(srcArray == noData,
numpy.logical_not(rasterizedArray)))
self.calculateHypsometry(f.id(), fName, feedback, masked,
cellXSize, cellYSize, percentage, step)
memVDS = None
rasterizedDS = None
feedback.setProgress(int(current * total))
rasterDS = None
return {self.OUTPUT_DIRECTORY: outputPath}
def processAlgorithm(self, feedback):
layer = dataobjects.getLayerFromString(
self.getParameterValue(self.INPUT_VECTOR))
rasterPath = str(self.getParameterValue(self.INPUT_RASTER))
rasterDS = gdal.Open(rasterPath, gdal.GA_ReadOnly)
geoTransform = rasterDS.GetGeoTransform()
rasterDS = None
fields = QgsFields()
fields.append(QgsField('id', QVariant.Int, '', 10, 0))
fields.append(QgsField('line_id', QVariant.Int, '', 10, 0))
fields.append(QgsField('point_id', QVariant.Int, '', 10, 0))
writer = self.getOutputFromName(self.OUTPUT_LAYER).getVectorWriter(
fields.toList(), QgsWkbTypes.Point, layer.crs())
outFeature = QgsFeature()
outFeature.setFields(fields)
self.fid = 0
self.lineId = 0
self.pointId = 0
features = vector.features(layer)
total = 100.0 / len(features)
for current, f in enumerate(features):
geom = f.geometry()
if geom.isMultipart():
lines = geom.asMultiPolyline()
for line in lines:
for i in range(len(line) - 1):
p1 = line[i]
p2 = line[i + 1]
(x1, y1) = raster.mapToPixel(p1.x(), p1.y(),
geoTransform)
(x2, y2) = raster.mapToPixel(p2.x(), p2.y(),
geoTransform)
self.buildLine(x1, y1, x2, y2, geoTransform, writer,
outFeature)
else:
points = geom.asPolyline()
for i in range(len(points) - 1):
p1 = points[i]
p2 = points[i + 1]
(x1, y1) = raster.mapToPixel(p1.x(), p1.y(), geoTransform)
(x2, y2) = raster.mapToPixel(p2.x(), p2.y(), geoTransform)
self.buildLine(x1, y1, x2, y2, geoTransform, writer,
outFeature)
self.pointId = 0
self.lineId += 1
feedback.setProgress(int(current * total))
del writer
def processAlgorithm(self, progress):
""" Based on code by Matthew Perry
https://gist.github.com/perrygeo/5667173
"""
layer = dataobjects.getObjectFromUri(
self.getParameterValue(self.INPUT_VECTOR))
rasterPath = str(self.getParameterValue(self.INPUT_RASTER))
bandNumber = self.getParameterValue(self.RASTER_BAND)
columnPrefix = self.getParameterValue(self.COLUMN_PREFIX)
useGlobalExtent = self.getParameterValue(self.GLOBAL_EXTENT)
rasterDS = gdal.Open(rasterPath, gdal.GA_ReadOnly)
geoTransform = rasterDS.GetGeoTransform()
rasterBand = rasterDS.GetRasterBand(bandNumber)
noData = rasterBand.GetNoDataValue()
cellXSize = abs(geoTransform[1])
cellYSize = abs(geoTransform[5])
rasterXSize = rasterDS.RasterXSize
rasterYSize = rasterDS.RasterYSize
rasterBBox = QgsRectangle(geoTransform[0],
geoTransform[3] - cellYSize * rasterYSize,
geoTransform[0] + cellXSize * rasterXSize,
geoTransform[3])
rasterGeom = QgsGeometry.fromRect(rasterBBox)
crs = osr.SpatialReference()
crs.ImportFromProj4(str(layer.crs().toProj4()))
if useGlobalExtent:
xMin = rasterBBox.xMinimum()
xMax = rasterBBox.xMaximum()
yMin = rasterBBox.yMinimum()
yMax = rasterBBox.yMaximum()
(startColumn, startRow) = mapToPixel(xMin, yMax, geoTransform)
(endColumn, endRow) = mapToPixel(xMax, yMin, geoTransform)
width = endColumn - startColumn
height = endRow - startRow
srcOffset = (startColumn, startRow, width, height)
srcArray = rasterBand.ReadAsArray(*srcOffset)
srcArray = srcArray * rasterBand.GetScale() + rasterBand.GetOffset(
)
newGeoTransform = (
geoTransform[0] + srcOffset[0] * geoTransform[1],
geoTransform[1],
0.0,
geoTransform[3] + srcOffset[1] * geoTransform[5],
0.0,
geoTransform[5],
)
memVectorDriver = ogr.GetDriverByName('Memory')
memRasterDriver = gdal.GetDriverByName('MEM')
fields = layer.fields()
(idxMin, fields) = vector.findOrCreateField(layer, fields,
columnPrefix + 'min', 21,
6)
(idxMax, fields) = vector.findOrCreateField(layer, fields,
columnPrefix + 'max', 21,
6)
(idxSum, fields) = vector.findOrCreateField(layer, fields,
columnPrefix + 'sum', 21,
6)
(idxCount, fields) = vector.findOrCreateField(layer, fields,
columnPrefix + 'count',
21, 6)
(idxMean, fields) = vector.findOrCreateField(layer, fields,
columnPrefix + 'mean', 21,
6)
(idxStd, fields) = vector.findOrCreateField(layer, fields,
columnPrefix + 'std', 21,
6)
(idxUnique, fields) = vector.findOrCreateField(layer, fields,
columnPrefix + 'unique',
21, 6)
(idxRange, fields) = vector.findOrCreateField(layer, fields,
columnPrefix + 'range',
21, 6)
(idxVar, fields) = vector.findOrCreateField(layer, fields,
columnPrefix + 'var', 21,
6)
(idxMedian, fields) = vector.findOrCreateField(layer, fields,
columnPrefix + 'median',
21, 6)
if hasSciPy:
(idxMode,
fields) = vector.findOrCreateField(layer, fields,
columnPrefix + 'mode', 21, 6)
writer = self.getOutputFromName(self.OUTPUT_LAYER).getVectorWriter(
fields.toList(), layer.wkbType(), layer.crs())
outFeat = QgsFeature()
outFeat.initAttributes(len(fields))
outFeat.setFields(fields)
features = vector.features(layer)
total = 100.0 / len(features)
for current, f in enumerate(features):
geom = f.geometry()
intersectedGeom = rasterGeom.intersection(geom)
ogrGeom = ogr.CreateGeometryFromWkt(intersectedGeom.exportToWkt())
if not useGlobalExtent:
bbox = intersectedGeom.boundingBox()
xMin = bbox.xMinimum()
xMax = bbox.xMaximum()
yMin = bbox.yMinimum()
yMax = bbox.yMaximum()
(startColumn, startRow) = mapToPixel(xMin, yMax, geoTransform)
(endColumn, endRow) = mapToPixel(xMax, yMin, geoTransform)
width = endColumn - startColumn
height = endRow - startRow
if width == 0 or height == 0:
continue
srcOffset = (startColumn, startRow, width, height)
srcArray = rasterBand.ReadAsArray(*srcOffset)
srcArray = srcArray * rasterBand.GetScale(
) + rasterBand.GetOffset()
newGeoTransform = (
geoTransform[0] + srcOffset[0] * geoTransform[1],
geoTransform[1],
0.0,
geoTransform[3] + srcOffset[1] * geoTransform[5],
0.0,
geoTransform[5],
)
# Create a temporary vector layer in memory
memVDS = memVectorDriver.CreateDataSource('out')
memLayer = memVDS.CreateLayer('poly', crs, ogr.wkbPolygon)
ft = ogr.Feature(memLayer.GetLayerDefn())
ft.SetGeometry(ogrGeom)
memLayer.CreateFeature(ft)
ft.Destroy()
# Rasterize it
rasterizedDS = memRasterDriver.Create('', srcOffset[2],
srcOffset[3], 1,
gdal.GDT_Byte)
rasterizedDS.SetGeoTransform(newGeoTransform)
gdal.RasterizeLayer(rasterizedDS, [1], memLayer, burn_values=[1])
rasterizedArray = rasterizedDS.ReadAsArray()
srcArray = numpy.nan_to_num(srcArray)
masked = numpy.ma.MaskedArray(
srcArray,
mask=numpy.logical_or(srcArray == noData,
numpy.logical_not(rasterizedArray)))
outFeat.setGeometry(geom)
attrs = f.attributes()
v = float(masked.min())
attrs.insert(idxMin, None if numpy.isnan(v) else v)
v = float(masked.max())
attrs.insert(idxMax, None if numpy.isnan(v) else v)
v = float(masked.sum())
attrs.insert(idxSum, None if numpy.isnan(v) else v)
attrs.insert(idxCount, int(masked.count()))
v = float(masked.mean())
attrs.insert(idxMean, None if numpy.isnan(v) else v)
v = float(masked.std())
attrs.insert(idxStd, None if numpy.isnan(v) else v)
attrs.insert(idxUnique, numpy.unique(masked.compressed()).size)
v = float(masked.max()) - float(masked.min())
attrs.insert(idxRange, None if numpy.isnan(v) else v)
v = float(masked.var())
attrs.insert(idxVar, None if numpy.isnan(v) else v)
v = float(numpy.ma.median(masked))
attrs.insert(idxMedian, None if numpy.isnan(v) else v)
if hasSciPy:
attrs.insert(idxMode, float(mode(masked, axis=None)[0][0]))
outFeat.setAttributes(attrs)
writer.addFeature(outFeat)
memVDS = None
rasterizedDS = None
progress.setPercentage(int(current * total))
rasterDS = None
del writer
def processAlgorithm(self, progress):
layer = dataobjects.getObjectFromUri(
self.getParameterValue(self.INPUT_VECTOR))
rasterPath = str(self.getParameterValue(self.INPUT_RASTER))
rasterDS = gdal.Open(rasterPath, gdal.GA_ReadOnly)
geoTransform = rasterDS.GetGeoTransform()
rasterDS = None
fields = QgsFields()
fields.append(QgsField('id', QVariant.Int, '', 10, 0))
fields.append(QgsField('poly_id', QVariant.Int, '', 10, 0))
fields.append(QgsField('point_id', QVariant.Int, '', 10, 0))
writer = self.getOutputFromName(self.OUTPUT_LAYER).getVectorWriter(
fields.toList(), QgsWkbTypes.Point, layer.crs())
outFeature = QgsFeature()
outFeature.setFields(fields)
fid = 0
polyId = 0
pointId = 0
features = vector.features(layer)
total = 100.0 / len(features)
for current, f in enumerate(features):
geom = f.geometry()
bbox = geom.boundingBox()
xMin = bbox.xMinimum()
xMax = bbox.xMaximum()
yMin = bbox.yMinimum()
yMax = bbox.yMaximum()
(startRow,
startColumn) = raster.mapToPixel(xMin, yMax, geoTransform)
(endRow, endColumn) = raster.mapToPixel(xMax, yMin, geoTransform)
# use prepared geometries for faster intersection tests
engine = QgsGeometry.createGeometryEngine(geom.geometry())
engine.prepareGeometry()
for row in range(startRow, endRow + 1):
for col in range(startColumn, endColumn + 1):
(x, y) = raster.pixelToMap(row, col, geoTransform)
point = QgsPointV2()
point.setX(x)
point.setY(y)
if engine.contains(point):
outFeature.setGeometry(QgsGeometry(point))
outFeature['id'] = fid
outFeature['poly_id'] = polyId
outFeature['point_id'] = pointId
fid += 1
pointId += 1
writer.addFeature(outFeature)
pointId = 0
polyId += 1
progress.setPercentage(int(current * total))
del writer
def processAlgorithm(self, progress):
rasterPath = self.getParameterValue(self.INPUT_DEM)
layer = dataobjects.getObjectFromUri(
self.getParameterValue(self.BOUNDARY_LAYER))
step = self.getParameterValue(self.STEP)
percentage = self.getParameterValue(self.USE_PERCENTAGE)
outputPath = self.getOutputValue(self.OUTPUT_DIRECTORY)
rasterDS = gdal.Open(rasterPath, gdal.GA_ReadOnly)
geoTransform = rasterDS.GetGeoTransform()
rasterBand = rasterDS.GetRasterBand(1)
noData = rasterBand.GetNoDataValue()
cellXSize = abs(geoTransform[1])
cellYSize = abs(geoTransform[5])
rasterXSize = rasterDS.RasterXSize
rasterYSize = rasterDS.RasterYSize
rasterBBox = QgsRectangle(geoTransform[0], geoTransform[3] - cellYSize
* rasterYSize, geoTransform[0] + cellXSize
* rasterXSize, geoTransform[3])
rasterGeom = QgsGeometry.fromRect(rasterBBox)
crs = osr.SpatialReference()
crs.ImportFromProj4(str(layer.crs().toProj4()))
memVectorDriver = ogr.GetDriverByName('Memory')
memRasterDriver = gdal.GetDriverByName('MEM')
features = vector.features(layer)
count = len(features)
total = 100.0 / float(count)
for count, f in enumerate(features):
geom = f.geometry()
intersectedGeom = rasterGeom.intersection(geom)
if intersectedGeom.isGeosEmpty():
progress.setInfo(
self.tr('Feature %d does not intersect raster or '
'entirely located in NODATA area' % f.id()))
continue
fName = os.path.join(
outputPath, 'hystogram_%s_%s.csv' % (layer.name(), f.id()))
ogrGeom = ogr.CreateGeometryFromWkt(intersectedGeom.exportToWkt())
bbox = intersectedGeom.boundingBox()
xMin = bbox.xMinimum()
xMax = bbox.xMaximum()
yMin = bbox.yMinimum()
yMax = bbox.yMaximum()
(startColumn, startRow) = raster.mapToPixel(xMin, yMax, geoTransform)
(endColumn, endRow) = raster.mapToPixel(xMax, yMin, geoTransform)
width = endColumn - startColumn
height = endRow - startRow
srcOffset = (startColumn, startRow, width, height)
srcArray = rasterBand.ReadAsArray(*srcOffset)
if srcOffset[2] == 0 or srcOffset[3] == 0:
progress.setInfo(
self.tr('Feature %d is smaller than raster '
'cell size' % f.id()))
continue
newGeoTransform = (
geoTransform[0] + srcOffset[0] * geoTransform[1],
geoTransform[1],
0.0,
geoTransform[3] + srcOffset[1] * geoTransform[5],
0.0,
geoTransform[5]
)
memVDS = memVectorDriver.CreateDataSource('out')
memLayer = memVDS.CreateLayer('poly', crs, ogr.wkbPolygon)
ft = ogr.Feature(memLayer.GetLayerDefn())
ft.SetGeometry(ogrGeom)
memLayer.CreateFeature(ft)
ft.Destroy()
rasterizedDS = memRasterDriver.Create('', srcOffset[2],
srcOffset[3], 1, gdal.GDT_Byte)
rasterizedDS.SetGeoTransform(newGeoTransform)
gdal.RasterizeLayer(rasterizedDS, [1], memLayer, burn_values=[1])
rasterizedArray = rasterizedDS.ReadAsArray()
srcArray = numpy.nan_to_num(srcArray)
masked = numpy.ma.MaskedArray(srcArray,
mask=numpy.logical_or(srcArray == noData,
numpy.logical_not(rasterizedArray)))
self.calculateHypsometry(f.id(), fName, progress, masked,
cellXSize, cellYSize, percentage, step)
memVDS = None
rasterizedDS = None
progress.setPercentage(int(count * total))
rasterDS = None
def processAlgorithm(self, parameters, context, feedback):
source = self.parameterAsSource(parameters, self.INPUT_VECTOR, context)
if source is None:
raise QgsProcessingException(self.invalidSourceError(parameters, self.INPUT_VECTOR))
raster_layer = self.parameterAsRasterLayer(parameters, self.INPUT_RASTER, context)
rasterPath = raster_layer.source()
rasterDS = gdal.Open(rasterPath, gdal.GA_ReadOnly)
geoTransform = rasterDS.GetGeoTransform()
rasterDS = None
fields = QgsFields()
fields.append(QgsField('id', QVariant.Int, '', 10, 0))
fields.append(QgsField('line_id', QVariant.Int, '', 10, 0))
fields.append(QgsField('point_id', QVariant.Int, '', 10, 0))
(sink, dest_id) = self.parameterAsSink(parameters, self.OUTPUT, context,
fields, QgsWkbTypes.Point, raster_layer.crs())
if sink is None:
raise QgsProcessingException(self.invalidSinkError(parameters, self.OUTPUT))
outFeature = QgsFeature()
outFeature.setFields(fields)
self.fid = 0
self.lineId = 0
self.pointId = 0
features = source.getFeatures(QgsFeatureRequest().setDestinationCrs(raster_layer.crs(), context.transformContext()))
total = 100.0 / source.featureCount() if source.featureCount() else 0
for current, f in enumerate(features):
if feedback.isCanceled():
break
if not f.hasGeometry():
continue
geom = f.geometry()
if geom.isMultipart():
lines = geom.asMultiPolyline()
for line in lines:
for i in range(len(line) - 1):
p1 = line[i]
p2 = line[i + 1]
(x1, y1) = raster.mapToPixel(p1.x(), p1.y(),
geoTransform)
(x2, y2) = raster.mapToPixel(p2.x(), p2.y(),
geoTransform)
self.buildLine(x1, y1, x2, y2, geoTransform,
sink, outFeature)
else:
points = geom.asPolyline()
for i in range(len(points) - 1):
p1 = points[i]
p2 = points[i + 1]
(x1, y1) = raster.mapToPixel(p1.x(), p1.y(), geoTransform)
(x2, y2) = raster.mapToPixel(p2.x(), p2.y(), geoTransform)
self.buildLine(x1, y1, x2, y2, geoTransform, sink,
outFeature)
self.pointId = 0
self.lineId += 1
feedback.setProgress(int(current * total))
return {self.OUTPUT: dest_id}
rasterBand = raster.GetRasterBand(i + 1)
data = rasterBand.ReadAsArray()
layer.ResetReading()
feature = layer.GetNextFeature()
while feature is not None:
current += 1
progress.setPercentage(int(current * total))
geometry = feature.GetGeometryRef()
x = geometry.GetX()
y = geometry.GetY()
if Transform_vector_to_raster_CRS:
pnt = coordTransform.TransformPoint(x, y, 0)
x = pnt[0]
y = pnt[1]
rX, rY = mapToPixel(x, y, geoTransform)
if rX > rasterXSize or rY > rasterYSize:
feature = layer.GetNextFeature()
continue
value = data[rY, rX]
feature.SetField(columnName + "_" + str(i + 1), float(value))
if layer.SetFeature(feature) != 0:
raise GeoAlgorithmExecutionException("Failed to update feature.")
feature = layer.GetNextFeature()
rasterBand = None
raster = None
vector.Destroy()
def processAlgorithm(self, parameters, context, feedback):
source = self.parameterAsSource(parameters, self.INPUT_VECTOR, context)
if source is None:
raise QgsProcessingException(self.invalidSourceError(parameters, self.INPUT_VECTOR))
raster_layer = self.parameterAsRasterLayer(parameters, self.INPUT_RASTER, context)
rasterPath = raster_layer.source()
rasterDS = gdal.Open(rasterPath, gdal.GA_ReadOnly)
geoTransform = rasterDS.GetGeoTransform()
fields = QgsFields()
fields.append(QgsField('id', QVariant.Int, '', 10, 0))
fields.append(QgsField('poly_id', QVariant.Int, '', 10, 0))
fields.append(QgsField('point_id', QVariant.Int, '', 10, 0))
(sink, dest_id) = self.parameterAsSink(parameters, self.OUTPUT, context,
fields, QgsWkbTypes.Point, raster_layer.crs())
if sink is None:
raise QgsProcessingException(self.invalidSinkError(parameters, self.OUTPUT))
outFeature = QgsFeature()
outFeature.setFields(fields)
fid = 0
polyId = 0
pointId = 0
features = source.getFeatures(QgsFeatureRequest().setDestinationCrs(raster_layer.crs(), context.transformContext()))
total = 100.0 / source.featureCount() if source.featureCount() else 0
for current, f in enumerate(features):
if feedback.isCanceled():
break
if not f.hasGeometry():
continue
geom = f.geometry()
bbox = geom.boundingBox()
xMin = bbox.xMinimum()
xMax = bbox.xMaximum()
yMin = bbox.yMinimum()
yMax = bbox.yMaximum()
(startRow, startColumn) = raster.mapToPixel(xMin, yMax, geoTransform)
(endRow, endColumn) = raster.mapToPixel(xMax, yMin, geoTransform)
# use prepared geometries for faster intersection tests
engine = QgsGeometry.createGeometryEngine(geom.constGet())
engine.prepareGeometry()
for row in range(startRow, endRow + 1):
for col in range(startColumn, endColumn + 1):
if feedback.isCanceled():
break
(x, y) = raster.pixelToMap(row, col, geoTransform)
point = QgsPoint(x, y)
if engine.contains(point):
outFeature.setGeometry(QgsGeometry(point))
outFeature['id'] = fid
outFeature['poly_id'] = polyId
outFeature['point_id'] = pointId
fid += 1
pointId += 1
sink.addFeature(outFeature, QgsFeatureSink.FastInsert)
pointId = 0
polyId += 1
feedback.setProgress(int(current * total))
return {self.OUTPUT: dest_id}
def numpy_stats(band, geometry, geo_transform, no_data, crs):
"""
:param band: A valid band from a raster layer.
:type band: GDALRasterBand
:param geometry: A polygon geometry used to calculate statistics.
:type geometry: QgsGeometry
:param geo_transform: Geo-referencing transform from raster metadata.
:type geo_transform: list (six floats)
:param no_data: Value for no data in the raster.
:type no_data: int, float
:param crs: Coordinate reference system of the vector layer.
:type crs: OGRSpatialReference
:returns: Count, Freq - total number of pixels that intersect with the geometry
and the frequency distribution of these pixel values.
:rtype: (int, dict)
"""
mem_drv = ogr.GetDriverByName('Memory')
driver = gdal.GetDriverByName('MEM')
geom = ogr.CreateGeometryFromWkt(str(geometry.exportToWkt()))
bbox = geometry.boundingBox()
x_min = bbox.xMinimum()
x_max = bbox.xMaximum()
y_min = bbox.yMinimum()
y_max = bbox.yMaximum()
start_column, start_row = mapToPixel(x_min, y_max, geo_transform)
end_column, end_row = mapToPixel(x_max, y_min, geo_transform)
width = end_column - start_column
height = end_row - start_row
if width == 0 or height == 0:
return 0, None
src_offset = (start_column, start_row, width, height)
new_geo_transform = (
(geo_transform[0] + (src_offset[0] * geo_transform[1])),
geo_transform[1],
0.0,
(geo_transform[3] + (src_offset[1] * geo_transform[5])),
0.0,
geo_transform[5]
)
# Create a temporary vector layer in memory
mem_ds = mem_drv.CreateDataSource('out')
mem_layer = mem_ds.CreateLayer('poly', crs, ogr.wkbMultiPolygon)
feat = ogr.Feature(mem_layer.GetLayerDefn())
feat.SetGeometry(geom)
mem_layer.CreateFeature(feat)
feat.Destroy()
# Rasterize it
rasterized_ds = driver.Create('', src_offset[2], src_offset[3], 1, gdal.GDT_Byte)
rasterized_ds.SetGeoTransform(new_geo_transform)
gdal.RasterizeLayer(rasterized_ds, [1], mem_layer, burn_values=[1])
# scan the original raster row-by-row to gather statistics
count = 0
freq = {}
for r in range(height):
src_array = band.ReadAsArray(start_column, r + start_row, width, 1)
rv_array = rasterized_ds.ReadAsArray(0, r, width, 1)
# Mask the source data array with our current feature
# we take the logical_not to flip 0<->1 to get the correct mask effect
# we also mask out no data values explicitly
src_array = numpy.nan_to_num(src_array)
masked = numpy.ma.MaskedArray(
src_array,
mask=numpy.logical_or(
src_array == no_data,
numpy.logical_not(rv_array)
)
)
# get sorted frequency counts
compressed = masked.compressed()
if compressed.any():
for (k, v) in unique_count(compressed):
if k in freq:
freq[k] = freq[k] + v
else:
freq[k] = v
count = count + compressed.size
return count, freq