def test_load_conf17():
root = tk.Tk()
ac = AppConfig("./test/test-config.file")
rr = RigRemote(root, ac)
rr.apply_config(ac)
assert (rr.params["cbb_mode"].config()["values"][4] == ('', 'OFF', 'RAW', 'AM', 'FM', 'WFM', 'WFM_ST', 'LSB', 'USB', 'CW', 'CWL', 'CWU'))
rr.root.destroy()
def test_load_conf16():
root = tk.Tk()
ac = AppConfig("./test/test-config.file")
rr = RigRemote(root, ac)
rr.apply_config(ac)
assert (rr.params["cbb_mode"].current() == 0)
rr.root.destroy()
def test_error_clear_form():
root = tk.Tk()
ac = AppConfig("./test/test-config.file")
ac.read_conf()
rr = RigRemote(root, ac)
with pytest.raises(NotImplementedError):
rr._clear_form(3)
def test_load_conf1():
root = tk.Tk()
ac = AppConfig("./test/test-config.file")
rr = RigRemote(root, ac)
rr.apply_config(ac)
assert (rr.params["txt_hostname"].get() == "127.0.0.1")
rr.root.destroy()
def test_scan():
root = tk.Tk()
ac = AppConfig("./test/test-config.file")
ac.read_conf()
rr = RigRemote(root, ac)
with pytest.raises(UnsupportedScanningConfigError):
rr._scan("test", "test")
def test_load_conf4():
root = tk.Tk()
ac = AppConfig("./test/test-config.file")
rr = RigRemote(root, ac)
rr.apply_config(ac)
assert (rr.params["txt_range_min"].get() == "159,000")
rr.root.destroy()
def test_processs_hostname_entry(entry):
root = tk.Tk()
ac = AppConfig("./test/test-config.file")
rr = RigRemote(root, ac)
rr.apply_config(ac)
rr._process_hostname_entry(entry, True)
rr.root.destroy()
def test_load_conf6():
root = tk.Tk()
ac = AppConfig("./test/test-config.file")
rr = RigRemote(root, ac)
rr.apply_config(ac)
assert (rr.params["txt_interval"].get() == "100")
rr.root.destroy()
def test_load_conf9():
root = tk.Tk()
ac = AppConfig("./test/test-config.file")
rr = RigRemote(root, ac)
rr.apply_config(ac)
assert (rr.params["txt_frequency"].get() == "")
rr.root.destroy()
def test_load_conf10():
root = tk.Tk()
ac = AppConfig("./test/test-config.file")
rr = RigRemote(root, ac)
rr.apply_config(ac)
assert(rr.params["ckb_wait"].is_checked() == 0)
rr.root.destroy()
def test_load_conf11():
root = tk.Tk()
ac = AppConfig("./test/test-config.file")
rr = RigRemote(root, ac)
rr.apply_config(ac)
assert (rr.params["txt_sgn_level"].get() == "-40")
rr.root.destroy()
def test_load_conf7():
root = tk.Tk()
ac = AppConfig("./test/test-config.file")
ac.read_conf()
rr = RigRemote(root, ac)
rr.apply_config(ac)
assert (rr.params["txt_passes"].get() == "1")
rr.root.destroy()
def test_2_clear_form():
root = tk.Tk()
ac = AppConfig("./test/test-config.file")
ac.read_conf()
rr = RigRemote(root, ac)
rr._clear_form(2)
assert (rr.params["txt_frequency2"].get() == "")
assert (rr.params["txt_port2"].get() == "")
def test_load_conf16():
root = tk.Tk()
ac = AppConfig("./test/test-config.file")
ac.read_conf()
rr = RigRemote(root, ac)
rr.apply_config(ac)
assert (rr.params["cbb_mode1"].current() == 0)
rr.root.destroy()
def test_load_conf14():
root = tk.Tk()
ac = AppConfig("./test/test-config.file")
ac.read_conf()
rr = RigRemote(root, ac)
rr.apply_config(ac)
assert (rr.params["ckb_auto_bookmark"].is_checked() == 0)
rr.root.destroy()
def test_cb_add(entry):
root = tk.Tk()
ac = AppConfig("./test/test-config.file")
rr = RigRemote(root, ac)
rr.apply_config(ac)
rr.params["txt_frequency"].insert(0, entry)
rr.cb_add(True)
rr.root.destroy()
def test_processs_port_entry_2():
root = tk.Tk()
ac = AppConfig("./test/test-config.file")
rr = RigRemote(root, ac)
rr.apply_config(ac)
rr._process_port_entry("8080", True)
rr.rigctl.port="8080"
rr.root.destroy()
def test_load_conf17():
root = tk.Tk()
ac = AppConfig("./test/test-config.file")
ac.read_conf()
rr = RigRemote(root, ac)
rr.apply_config(ac)
assert (rr.params["cbb_mode1"].config()["values"][4] == ('', 'AM', 'FM',
'WFM', 'WFM_ST',
'LSB', 'USB',
'CW', 'CWL',
'CWU'))
rr.root.destroy()
def test_ok_is_valid_port():
root = tk.Tk()
ac = AppConfig("./test/test-config.file")
ac.read_conf()
rr = RigRemote(root, ac)
assert (is_valid_port("1025") == None)
rr.root.destroy()
def test_store_conf(key, value):
root = tk.Tk()
ac = AppConfig("./test/test-config.file")
ac.read_conf()
rr = RigRemote(root, ac)
rr.ac.write_conf = MagicMock()
out = store_conf(rr)
assert(out.config[key] == value)
rr.root.destroy()
def test_center_window():
root = tk.Tk()
ac = AppConfig("./test/test-config.file")
ac.read_conf()
rr = RigRemote(root, ac)
rr.ac.write_conf = MagicMock()
panel = tk.Toplevel(rr)
center_window(panel)
assert(panel.geometry() == '1x1+533+284')
rr.root.destroy()
def test_process_hostname_entry(entry):
root = tk.Tk()
ac = AppConfig("./test/test-config.file")
ac.read_conf()
rr = RigRemote(root, ac)
rr.apply_config(ac)
rr._process_hostname_entry(entry, True)
rr.root.destroy()
truncate_bookmark_file()
def test_process_port_entry_2():
root = tk.Tk()
ac = AppConfig("./test/test-config.file")
ac.read_conf()
rr = RigRemote(root, ac)
rr.apply_config(ac)
rr._process_port_entry("8080", True)
rr.rigctl.port = "8080"
rr.root.destroy()
def test_cb_add(entry, fake_control_source):
root = tk.Tk()
ac = AppConfig("./test/test-config.file")
ac.read_conf()
rr = RigRemote(root, ac)
rr.apply_config(ac)
rr.params["txt_frequency1"].insert(0, entry)
rr.cb_add(fake_control_source, True)
rr.root.destroy()
truncate_bookmark_file()
if args.alternate_prefix:
dir_prefix = os.path.expanduser(args.alternate_prefix)
else:
dir_prefix = os.path.expanduser(DEFAULT_PREFIX)
if args.alternate_config_file:
config_file = process_path(args.alternate_config_file)
else:
config_file = os.path.join(dir_prefix, DEFAULT_CONFIG_FILENAME)
root = tk.Tk()
ac = AppConfig(config_file)
# set bookmarks and log filename in this order:
# use command line alternate path
# use path from config file
# use default path
if args.alternate_bookmark_file:
ac.config['bookmark_filename'] = process_path(args.alternate_bookmark_file)
elif ac.config['bookmark_filename'] == 'noname':
ac.config['bookmark_filename'] = os.path.join(dir_prefix, DEFAULT_BOOKMARK_FILENAME)
#set activity log filename
if args.alternate_log_file:
ac.config['log_filename'] = process_path(args.alternate_log_file)
elif ac.config['log_filename'] == 'noname':
ac.config['log_filename'] = os.path.join(dir_prefix, DEFAULT_LOG_FILENAME)
app = RigRemote(root, ac)
app.apply_config(ac)
app.mainloop()
if app.scan_thread != None :
app.scanning.terminate()
def test_popup_about():
root = tk.Tk()
ac = AppConfig("./test/test-config.file")
ac.read_conf()
rr = RigRemote(root, ac)
assert (rr.ckb_top.val.get() == False)
def test_new_activity_message():
root = tk.Tk()
ac = AppConfig("./test/test-config.file")
ac.read_conf()
rr = RigRemote(root, ac)
assert (rr._new_activity_message([]) == "")
def test_cb_get_frequency(fake_target):
root = tk.Tk()
ac = AppConfig("./test/test-config.file")
ac.read_conf()
rr = RigRemote(root, ac)
rr.cb_get_frequency(fake_target)
conf = args.alternate_config_file
config_file = process_path(conf)
else:
config_file = os.path.join(dir_prefix, DEFAULT_CONFIG_FILENAME)
root = tk.Tk()
ac = AppConfig(config_file)
# set bookmarks and log filename in this order:
# use command line alternate path
# use path from config file
# use default path
ac.read_conf()
if args.alternate_bookmark_file != None:
bookmarks = args.alternate_bookmark_file
ac.config['bookmark_filename'] = process_path(bookmarks)
elif ac.config["bookmark_filename"] == None:
ac.config["bookmark_filename"] = os.path.join(dir_prefix, DEFAULT_BOOKMARK_FILENAME)
# set activity log filename
if args.alternate_log_file != None:
log = args.alternate_log_file
ac.config['log_filename'] = process_path(log)
else:
ac.config['log_filename'] = os.path.join(dir_prefix, DEFAULT_LOG_FILENAME)
app = RigRemote(root, ac)
app.apply_config(ac)
app.mainloop()
if app.scan_thread != None :
app.scanning.terminate()