Automatically converts media files downloaded by various programs to mp4 files, and tags them with the appropriate metadata from theTVDB or TMDB.

Works on Windows, OSX, and Linux

Media Managers Supported:

• Sickbeard
• SickRage
• CouchPotato
• Sonarr (tagging not supported, see below)

Downloaders Supported:

• SABNZBD
• NZBGet
• uTorrent
• Deluge Daemon

• Python 2.7 (Does NOT work with Python 3)
• FFMPEG and FFPROBE binaries
• Requests module
• Gevent
• Python setup_tools

1. Video - H264
2. Audio - AAC 2.0 with additional AC3 track when source has >2 channels (ex 5.1)
3. Subtitles - mov_text

• Setup_tools - https://pypi.python.org/pypi/setuptools#installation-instructions
• Requests - Run pip install requests
• Gevent - Run pip install gevent
• stevedore - Run pip install stevedore (this will be automatically installed with subliminal)
• dateutil - Run pip install python-dateutil (this will be automatically installed with subliminal)

1. Rename autoProcess.ini.sample to autoProcess.ini
2. Set the MP4 variables to your desired output
   • ffmpeg = Path to FFMPEG.exe
   • ffprobe = Path to FFPROBE.exe
   • output_directory = you may specify an alternate output directory. Leave blank to use the same directory that the source file is in. All processing will be done in this location. (Do not use for 'Automatically Add to iTunes' folder, iTunes will add prematurely, use move_to)
   • copy_to = you may specify additional directories for the final product to be replicated to. This will be the last step performed so the file copied will be fully processed. Directories may be separated with a | character
   • move_to = you may specify one final directory to move the completed file. (Use this option for the 'Automatically Add to iTunes' folder)
   • output_extension = mp4/m4v (must be one of these 2)
   • output_format = mp4/mov (must be one of these 2, mov provides better compatability with iTunes/Apple, mp4 works better with other mobile devices)
   • delete_original = True/False
   • relocate_moov = True/False - relocates the MOOV atom to the beginning of the file for better streaming
   • ios-audio = creates a 2nd copy of an audio stream that will be iOS compatible (AAC Stereo) if the normal output will not be. If a stereo source stream is detected with this option enabled, an AAC stereo stream will be the only one produced (essentially overriding the codec option) to avoid multiple stereo audio stream copies in different codecs.
   • max-audio-channels = Sets a maximum number of audio channels. This may provide an alternative to the iOS audio option, where instead users can simply select the desired output codec and the max number of audio channels without the creation of an additional audio track.
   • video-codec = set your desired video codecs. May specify multiple comma separated values (ex: h264, x264). The first value specified will be the default conversion choice when an undesired codec is encountered; any codecs specified here will be remuxed/copied rather than converted.
   • video-bitrate = allows you to set a maximum video bitrate in Kbps. If the source file exceeds the video-bitrate it will be transcoded to the specified video-bitrate, even if they source file is already in the correct video codec. If the source file is in the correct video codec and does not exceed the video-bitrate setting, then it will be copied without transcoding. Leave blank to disable this setting.
   • audio-codec = set your desired audio codecs. May specify multiple comma separated values (ex: ac3, aac). The first value specified will be the default conversion choice when an undesired codec is encountered; any codecs specified here will be remuxed/copied rather than converted.
   • audio-channel-bitrate = set the bitrate for each audio channel. Default is 256. Setting this value to 0 will attempt to mirror the bitrate of the audio source, but this can be unreliable as bitrates vary between different codecs.
   • audio-language = 3 letter language code for audio streams you wish to copy. Leave blank to copy all. Separate multiple audio streams with commas (ex: eng,spa)
   • audio-default-language = If an audio stream with an unidentified/untagged language is detected, you can default that language tag to whatever this value is (ex: eng). This is useful for many single-audio releases which don't bother to tag the audio stream as anything
   • subtitle-codec = set your desired subtitle codec. If you're embedding subs, mov_text is the only option supported. If you're creating external subtitle files, srt or webvtt are accepted.
   • subtitle-language = same as audio-language but for subtitles. Set to nil to disable copying of subtitles.
   • subtitle-language-default = same as audio-language-default but for subtitles
   • convert-mp4 = forces the script to reprocess and convert mp4 files as though they were mkvs. Good if you have old mp4's that you want to match your current codec configuration.
   • fullpathguess = True/False - When manually processing a file, enable to guess metadata using the full path versus just the file name. (Files shows placed in a 'Movies' folder will be recognized as movies, not as TV shows for example.)
   • tagfile = True/False - Enable or disable tagging file with appropriate metadata after encoding.
   • tag-language = en - Set your tag language for TMDB/TVDB entries metadata retrieval. Use either 2 or 3 character language codes.
   • download-artwork = True/False - Enabled downloading and embeddeding of Season or Movie posters and embeddeding of that image into the mp4 as the cover image.
   • download-subs = True/False - When enabled the script will attempt to download subtitles of your specified languages automatically using subliminal and merge them into the final mp4 file.
   • embed-subs = True/False - Enabled by default. Embeds subtitles in the resulting MP4 file that are found embedded in the source file as well as external SRT/VTT files. Disabling embed-subs will cause the script to extract any subtitles that meet your language criteria into external SRT/VTT files. The script will also attempt to download SRT files if possible and this feature is enabled. YOU MUST INSTALL SUBLIMINAL AND ITS DEPENDENCIES FOR THIS TO WORK. You must go into the setup\subliminal directory included in this script and run setup.py install to add support for fetching of subtitles. The version included with this script is modified from the stock version of subliminal, so you must install the included version.
   • sub-providers = Comma separated values for potential subtitle providers. Must specify at least 1 provider to enable download-subs. Providers include podnapisi thesubdb opensubtitles tvsubtitles addic7ed

1. Open Sickbeard's config.ini in Sick Beard installation folder
   • Set "extra_scripts" value in the general section to the full path to "python postConversion.py" using double backslashes
     • Example: C:\\Python27\\python C:\\Scripts\\postConversion.py
     • Make sure this is done while Sick Beard is not running or it will be reverted
2. Set the SickBeard variables in autoProcess.ini under the [Sickbeard] section:
   • host - default localhost - Sick Beard host address
   • port - default 8081 - Sick Beard port
   • ssl - 0/1
   • api_key - Set this to your Sickbeard API key (options -> general, enable API in Sick Beard to get this key)
   • web_root - Set your Sickbeard webroot
   • user - Username
   • password - Password

1. Open the configuration page in Sickrage and scroll down to the option labelled "Extra Scripts". Here enter the path to python followed by the full script path. Examples:
   • C:\\Python27\\python.exe C:\\sickbeard_mp4_automator\\postConversion.py
   • /usr/bin/python /home/user/sickbeard_mp4_automator/postConversion.py
2. Set the Sickrage variables in autoProcess.ini under the [Sickrage] section:
   • host - default localhost - Sickrage host address (localhost)
   • port - default 8081 Sickrage port
   • ssl - 1 if enabled, 0 if not
   • api_key - Set this to your Sickrage API key
   • web_root - Set your Sickrage webroot
   • user - Username
   • password - Password

1. ** YOU MUST INSTALL THE PYTHON REQUESTS LIBRARY ** Run "pip install requests" or "easy_install requests"
2. Set your Sonarr settings in the autoProcess.ini file
   • host = Sonarr host address (localhost) #Settings/General/Start-Up
   • port = Sonarr port (8989) #Settings/General/Start-Up
   • ssl = 1 if enabled, 0 if not #Settings/General/Security
   • apikey = Sonarr API Key (required) #Settings/General/Security
   • web_root = URL base empty or e.g. /tv #Settings/General/Start-Up
3. Browse to the Settings>Download Client tab and enable advanced settings [Show].
4. Set the {Drone Factory Interval} to 0 to disable it. (NZBGet will trigger a specific path re-scan, allowing the mp4 conversion to be completed before Sonarr starts moving stuff around).
   • Sonarr does not currently support post processing scripts so tagging is not currently supported.

1. Set your Couch Potato settings to the autoProcess.ini file
   • host - default localhost - Couch Potato host address
   • port - default 5050 - Couch Potato port (5050)
   • ssl - 1 if enabled, 0 if not
   • api_key - Couch Potato API Key
   • username - your Couch Potato username
   • password - your Couch Potato password
2. Edit main.py in the setup\PostProcess folder
   • Set the path variable to the script location
   • By default it points to C:\\Scripts\\
   • Use double backslahses
3. Copy the PostProcess directory from the setup folder included with this script to the Couch Potato custom_plugins directory
   • Navigate to the About page in Couch Potato, where the installation directory is displayed.
   • Go to this folder and copy the PostProcess folder (the whole folder, not just the contents) to the Couch Potato custom_plugins directory
   • Delete any .pyc files you find.
   • Restart Couch Potato
   • Verify in Couch Potato logs that PostProcess was loaded.
4. If you're using one of the post download scripts ([SAB|NZBGet|uTorrent|deluge]PostProcess.py), disable automatic checking of the renamer folder, the script will automatically notify Couch Potato when it is complete to check for new videos to be renamed and relocated. Leaving this on may cause conflicts and CouchPotato may try to relocate/rename the file before processing is completed.
   • Set Run Every to 0
   • If you aren't using one of these scripts and are using an unsupport downloader, you will need to have CouchPotato periodically check the folder for files
5. Configure Downloaders
   • In Settings > Downloaders configure your labels or categories to match what you have configured in your respective downloader.

1. Copy the script NZBGetPostProcess.py to NZBGet's script folder.
   • Default location is ~/downloads/scripts/
2. Start/Restart NZBGet
3. Configure NZBGETPOSTPROCESS
   • Access NZBGet's WebUI
     • Default localhost:6789
   • Go to Settings
   • Select NZBGETPOSTPROCESS option at the bottom of the left hand navigation panel and configure the options
     • MP4_FOLDER - default ~/sickbeard_mp4_automator/ - Location of the script. Use full path with trailing backslash.
     • SHOULDCONVERT - True/False - Convert file before passing to destination
     • CP_CAT - default couchpotato - category of downloads that will be passed to CouchPotato
     • SONARR_CAT - default sonarr - category of downloads that will be passed to Sonarr
     • SICKBEARD_CAT - default sickbeard - category of downloads that will be passed to Sickbeard
     • SICKRAGE_CAT - default sickrage - category of downloads that will be passed to Sickrage
     • BYPASS_CAT - default bypass - category of downloads that may be converted but won't be passed on further
   • Save changes
   • Reload NZBGet
4. Verify that whatever media manager you are using is assigning the category to match the label settings specified here so that file will be passed back to the appropriate location

1. Configure SABNZBD section of autoProcess.ini
   • convert - True/False - Allows for conversion of files before passing back to the respective download manager.
   • sickbeard-category - default sickbeard - category that will be sent to Sickbeard for additional processing when download is complete
   • sickrage-category - default sickrage - category that will be sent to Sickrage for additional processing when download is complete
   • couchpotato-category - default couchpotato - category that will be sent to Couch Potato for additional processing when download is complete
   • sonarr-category - default sonarr - category that will be sent to Sonarr for additional processing when download is complete
   • byapss-category - default bypass - category that should be assigned to torrents that will not be sent anywhere when download is complete. Useful if you wish to convert files without additional processing
2. Point SABNZBD's script directory to the root directory where you have extract the script.
3. Configure categories. Categories will determine where the download is sent when it is finished
   • Settings > Categories
   • Configure name to match the settings from the SABNZBD section of autoProcess.ini
     • Default sickbeard
     • Default sickrage
     • Default couchpotato
     • Default sonarr
     • Default bypass
   • Select the SABPostProcess.py script
   • Save EACH category
4. Verify that whatever media manager you are using is assigning the label to match the label settings specified here so that file will be passed back to the appropriate location

1. Verify that you have installed the Requests library
   • pip install requests
2. Launch uTorrent
3. Set Run Program option
   • Go to Options > Preferences > Advanced > Run Program
   • Point to uTorrentPostProcess.py with command line parameters: %L %T %D %K %F %I in that exact order.
   • Reference picture: http://i.imgur.com/7eADkCI.png
4. Set your uTorrent settings in autoProcess.ini
   • convert - True/False. Allows for conversion of files before passing back to the respective download manager.
   • sickbeard-label - default sickbeard - uTorrent label that should be assigned to torrents that will be sent to Sickbeard for additional processing when download is complete.
   • sickrage-label - default sickrage` - uTorrent label that should be assigned to torrents that will be sent to Sickrage for additional processing when download is complete.
   • couchpotato-label - default couchpotato - uTorrent label that should be assigned to torrents that will be sent to Couch Potato for additional processing when download is complete.
   • sonarr-label - default sonarr - uTorrent label that should be assigned to torrents that will be sent to Sonarr for additional processing when download is complete.
   • bypass-label - default bypass - label that should be assigned to torrents that will not be sent anywhere when download is complete. Useful if you wish to convert files without additional processing.
   • webui - True/False. If True the script can change the state of the torrent.
   • action_before - stop/pause or any other action from http://help.utorrent.com/customer/portal/articles/1573952-actions---webapi
   • action_after - start/stop/pause/unpause/remove/removedata or any other action from http://help.utorrent.com/customer/portal/articles/1573952-actions---webapi
   • hostname - your uTorrent Web UI URL, eg http://localhost:8080/ including the trailing slash.
   • username - your uTorrent Web UI username.
   • password - your uTorrent Web UI password.
5. Verify that whatever media manager you are using is assigning the label to match the label settings specified here so that file will be passed back to the appropriate location

1. Verify that you have installed the Gevent library
   • pip install gevent
   • Windows users will need to also install the Microsoft Visual C++ Compiler for Python 2.7 for gevent to work. http://www.microsoft.com/en-us/download/details.aspx?id=44266
2. Create username and password for deluge daemon
   • Navigate to your deluge configuration folder
     • %appdata%\Roaming\Deluge in Windows
     • /var/lib/deluge/.config/deluge/ in Linux
   • Open the auth file
   • Add a username and password in the format <username>:<password>:<level>. Replace and with your choice and level with your desired authentication level. Default level is 10. Save auth.
     • Ex: sampleuser:samplepass:10
3. Start/Restart deluged
   • deluged not deluge
4. Access the WebUI
   • Default port is 8112
   • Default password is deluge
5. Enabled the Execute plugin
   • Add event for Torrent Complete
   • Set path to the full path to delugePostProcess.py or delugePostProcess.bat for Windows users.
6. Configure the deluge options in autoProcess.ini
   • sickbeard-label - Deluge label that should be assigned to torrents that will be sent to Sickbeard for additional processing when download is complete.
   • `sickrage-label - Deluge label that should be assigned to torrents that will be sent to Sickrage for additional processing when download is complete.
   • couchpotato-label - Deluge label that should be assigned to torrents that will be sent to Couch Potato for additional processing when download is complete.
   • sonarr-label - Deluge label that should be assigned to torrents that will be sent to Sonarr for additional processing when download is complete.
   • bypass-label - label that should be assigned to torrents that will not be sent anywhere when download is complete. Useful if you wish to convert files without additional processing.
   • convert - True/False. Allows for conversion of files before passing back to the respective download manager.
   • host - your Deluge hostname. Default is localhost
   • port - Deluge daemon port. Default is 58846. Do not confuse this with your WebUI port, which is different.
   • username - your Deluge username that you previously added to the auth file.
   • password - your Deluge password that you previously added to the auth file.
7. Verify that whatever downloader you are using is assigning the label to match the label settings specified here so that file will be passed back to the appropriate location

Send a Plex notification as the final step when all processing is completed. This feature prevents a file from being flagged as "in use" by Plex before processing has completed.

1. Disable automatic refreshing on your Plex server
   • Settings > Server > Library and disable Update my library automatically and Update my library periodically.
2. Configure autoProcess.ini
   • refresh - True/False - Enable or disable the feature
   • host - Plex hostname. Default localhost
   • port - Plex port. Default 32400

To run the script manually, simply run the manual.py file and follow the prompts it presents. If you wish to run it via the command line (good for batch operations) follow this format:

Help output
manual.py -h
usage: manual.py [-h] [-i INPUT] [-a] [-tv TVDBID] [-s SEASON] [-e EPISODE]
                 [-imdb IMDBID] [-tmdb TMDBID] [-nm] [-nc] [-nd]

Manual conversion and tagging script for sickbeard_mp4_automator

optional arguments:
  -h, --help            show this help message and exit
  -i INPUT, --input INPUT
                        The source that will be converted. May be a file or a
                        directory
  -a, --auto            Enable auto mode, the script will not prompt you for
                        any further input, good for batch files. It will guess
                        the metadata using guessit
  -tv TVDBID, --tvdbid TVDBID
                        Set the TVDB ID for a tv show
  -s SEASON, --season SEASON
                        Specifiy the season number
  -e EPISODE, --episode EPISODE
                        Specify the episode number
  -imdb IMDBID, --imdbid IMDBID
                        Specify the IMDB ID for a movie
  -tmdb TMDBID, --tmdbid TMDBID
                        Specify theMovieDB ID for a movie
  -nm, --nomove         Overrides and disables the custom moving of file
                        options that come from output_dir and move-to
  -nc, --nocopy         Overrides and disables the custom copying of file
                        options that come from output_dir and move-to
  -nt, --notag          Overrides and disables tagging when using the
                        automated option
  -nd, --nodelete       Overrides and disables deleting of original files
  -pr, --preserveRelative
                        Preserves relative directories when processing
                        multiple files using the copy-to or move-to
                        functionality
  -cmp4, --convertmp4   Overrides convert-mp4 setting in autoProcess.ini
                        enabling the reprocessing of mp4 files

Examples

Movies (using IMDB ID):
manual.py -i mp4path -m imdbid
Example: manual.py -i 'C:\The Matrix.mkv' -imdb tt0133093

Movies (using TMDB ID)
manual.py -i mp4path -tmdb tmdbid
Example: manual.py -i 'C:\The Matrix.mkv' -tmdb 603

TV
manual.py -i mp4path -tv tvdbid -s season -e episode
Example: manual.py -i 'C:\Futurama S03E10.mkv' -tv 73871‎ -s 3 -e 10

Auto Single File (will gather movie ID or TV show ID / season / spisode from the file name if possible)
manual.py -i mp4path -silent
Example: manual.py -i 'C:\Futurama S03E10.mkv' -a

Directory (you will be prompted at each file for the type of file and ID)
manual.py -i directory_path
Example: manual.py -i C:\Movies

Automated Directory (The script will attempt to figure out appropriate tagging based on file name)
manual.py -i directory_path -a
Example: manual.py -i C:\Movies -a

Process a directory but manually specific TVDB ID (Good for shows that don't correctly match using the guess)
manual.py -i directory -a -tv tvdbid
Example: manual.py -i C:\TV\Futurama\ -a -tv 73871

You may also simply run manual.py -i 'C:\The Matrix.mkv' and the script will prompt you for the missing information or attempt to guess based on the file name. You may run the script with a --auto or -a switch, which will let the script guess the tagging information based on the file name, avoiding any need for user input. This is the most ideal option for large batch file operations. The script may also be pointed to a directory, where it will process all files in the directory. If you run the script without the -silent switch, you will be prompted for each file with options on how to tag, to convert without tagging, or skip.

To use your own cover art instead of what the script pulls from TMDB or TVDB, simply place an image file named cover.jpg or cover.png in the same directory as the input video before processing and it will be used.

To import external subtitles, place the .srt file in the same directory as the file to be processed. The srt must have the same name as the input video file, as well as the 3 character language code for which the subtitle is. Subtitle importing obeys the langauge rules set in autoProcess.ini, so languages that aren't whitelisted will be ignored.

Naming example:

input mkv - The.Matrix.1999.mkv
subtitle srt - The.Matrix.1999.eng.srt

• ImportError: No module named pkg_resources - you need to install setuptools for python. See here: https://pypi.python.org/pypi/setuptools#installation-instructions
• Problems moving from downloader back to manager - you most likely haven't set up your categories correctly. The category options designated by SB/SR/CP/Sonarr need to match the ones set in your downloader either in the plugin options or in autoProcess.ini, and these categories ALL need to execute either SABPostProcess.py for SAB or NZBGetPostProcess.py for NZBGet. Make sure they match.

This project makes use of the following projects:

• http://www.sickbeard.com/
• http://couchpota.to/
• http://sabnzbd.org/
• http://github.com/senko/python-video-converter
• http://github.com/dbr/tvdb_api
• http://code.google.com/p/mutagen/
• http://imdbpy.sourceforge.net/
• http://github.com/danielgtaylor/qtfaststart
• http://github.com/clinton-hall/nzbToMedia
• http://github.com/wackou/guessit
• http://github.com/Diaoul/subliminal

Enjoy